Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into devel-stable

Conflicts:
	arch/arm/common/gic.c
	arch/arm/plat-omap/include/plat/common.h

5 files changed, 46 insertions, 31 deletions

diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index e0a0281..73f287d 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -171,14 +171,6 @@ config MACH_OMAP_GENERIC
 comment "OMAP CPU Speed"
 	depends on ARCH_OMAP1
 
-config OMAP_CLOCKS_SET_BY_BOOTLOADER
-	bool "OMAP clocks set by bootloader"
-	depends on ARCH_OMAP1
-	help
-	  Enable this option to prevent the kernel from overriding the clock
-	  frequencies programmed by bootloader for MPU, DSP, MMUs, TC,
-	  internal LCD controller and MPU peripherals.
-
 config OMAP_ARM_216MHZ
 	bool "OMAP ARM 216 MHz CPU (1710 only)"
         depends on ARCH_OMAP1 && ARCH_OMAP16XX
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 1b37400..af791196 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -302,8 +302,6 @@ static void __init ams_delta_init(void)
 	omap_cfg_reg(J19_1610_CAM_D6);
 	omap_cfg_reg(J18_1610_CAM_D7);
 
-	iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
-
 	omap_board_config = ams_delta_config;
 	omap_board_config_size = ARRAY_SIZE(ams_delta_config);
 	omap_serial_init();
@@ -373,10 +371,16 @@ static int __init ams_delta_modem_init(void)
 }
 arch_initcall(ams_delta_modem_init);
 
+static void __init ams_delta_map_io(void)
+{
+	omap15xx_map_io();
+	iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
+}
+
 MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
 	/* Maintainer: Jonathan McDowell <noodles@earth.li> */
 	.atag_offset	= 0x100,
-	.map_io		= omap15xx_map_io,
+	.map_io		= ams_delta_map_io,
 	.init_early	= omap1_init_early,
 	.reserve	= omap_reserve,
 	.init_irq	= omap1_init_irq,
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
index eaf09ef..16b1423 100644
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -17,7 +17,8 @@
 
 #include <plat/clock.h>
 
-extern int __init omap1_clk_init(void);
+int omap1_clk_init(void);
+void omap1_clk_late_init(void);
 extern int omap1_clk_enable(struct clk *clk);
 extern void omap1_clk_disable(struct clk *clk);
 extern long omap1_clk_round_rate(struct clk *clk, unsigned long rate);
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index 92400b9..1297bb5 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -767,6 +767,15 @@ static struct clk_functions omap1_clk_functions = {
 	.clk_disable_unused	= omap1_clk_disable_unused,
 };
 
+static void __init omap1_show_rates(void)
+{
+	pr_notice("Clocking rate (xtal/DPLL1/MPU): "
+			"%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
+		ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
+		ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
+		arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
+}
+
 int __init omap1_clk_init(void)
 {
 	struct omap_clk *c;
@@ -835,9 +844,12 @@ int __init omap1_clk_init(void)
 	/* We want to be in syncronous scalable mode */
 	omap_writew(0x1000, ARM_SYSST);
 
-#ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER
-	/* Use values set by bootloader. Determine PLL rate and recalculate
-	 * dependent clocks as if kernel had changed PLL or divisors.
+
+	/*
+	 * Initially use the values set by bootloader. Determine PLL rate and
+	 * recalculate dependent clocks as if kernel had changed PLL or
+	 * divisors. See also omap1_clk_late_init() that can reprogram dpll1
+	 * after the SRAM is initialized.
 	 */
 	{
 		unsigned pll_ctl_val = omap_readw(DPLL_CTL);
@@ -862,25 +874,10 @@ int __init omap1_clk_init(void)
 			}
 		}
 	}
-#else
-	/* Find the highest supported frequency and enable it */
-	if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
-		printk(KERN_ERR "System frequencies not set. Check your config.\n");
-		/* Guess sane values (60MHz) */
-		omap_writew(0x2290, DPLL_CTL);
-		omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL);
-		ck_dpll1.rate = 60000000;
-	}
-#endif
 	propagate_rate(&ck_dpll1);
 	/* Cache rates for clocks connected to ck_ref (not dpll1) */
 	propagate_rate(&ck_ref);
-	printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): "
-		"%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
-	       ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
-	       ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
-	       arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
-
+	omap1_show_rates();
 	if (machine_is_omap_perseus2() || machine_is_omap_fsample()) {
 		/* Select slicer output as OMAP input clock */
 		omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1,
@@ -925,3 +922,21 @@ int __init omap1_clk_init(void)
 
 	return 0;
 }
+
+#define OMAP1_DPLL1_SANE_VALUE	60000000
+
+void __init omap1_clk_late_init(void)
+{
+	if (ck_dpll1.rate >= OMAP1_DPLL1_SANE_VALUE)
+		return;
+
+	/* Find the highest supported frequency and enable it */
+	if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
+		pr_err("System frequencies not set, using default. Check your config.\n");
+		omap_writew(0x2290, DPLL_CTL);
+		omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL);
+		ck_dpll1.rate = OMAP1_DPLL1_SANE_VALUE;
+	}
+	propagate_rate(&ck_dpll1);
+	omap1_show_rates();
+}
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 9d47ca7..1d76a63 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -30,6 +30,8 @@
 #include <plat/omap7xx.h>
 #include <plat/mcbsp.h>
 
+#include "clock.h"
+
 /*-------------------------------------------------------------------------*/
 
 #if defined(CONFIG_RTC_DRV_OMAP) || defined(CONFIG_RTC_DRV_OMAP_MODULE)
@@ -293,6 +295,7 @@ static int __init omap1_init_devices(void)
 		return -ENODEV;
 
 	omap_sram_init();
+	omap1_clk_late_init();
 
 	/* please keep these calls, and their implementations above,
 	 * in alphabetical order so they're easier to sort through.