diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2011-01-06 19:13:58 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2011-01-06 19:13:58 -0800 |
commit | 01539ba2a706ab7d35fc0667dff919ade7f87d63 (patch) | |
tree | 5a4bd0cf78007d06690fe4ac06bbd49a5a70bc47 /arch/arm/mach-omap1 | |
parent | 9e9bc9736756f25d6c47b4eba0ebf25b20a6f153 (diff) | |
parent | dc69d1af9e8d9cbbabff88bb35a6782187a22229 (diff) | |
download | op-kernel-dev-01539ba2a706ab7d35fc0667dff919ade7f87d63.zip op-kernel-dev-01539ba2a706ab7d35fc0667dff919ade7f87d63.tar.gz |
Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (243 commits)
omap2: Make OMAP2PLUS select OMAP_DM_TIMER
OMAP4: hwmod data: Fix alignment and end of line in structurefields
OMAP4: hwmod data: Move the DMA structures
OMAP4: hwmod data: Move the smartreflex structures
OMAP4: hwmod data: Fix missing SIDLE_SMART_WKUP in smartreflexsysc
arm: omap: tusb6010: add name for MUSB IRQ
arm: omap: craneboard: Add USB EHCI support
omap2+: Initialize serial port for dynamic remuxing for n8x0
omap2+: Add struct omap_board_data and use it for platform level serial init
omap2+: Allow hwmod state changes to mux pads based on the state changes
omap2+: Add support for hwmod specific muxing of devices
omap2+: Add omap_mux_get_by_name
OMAP2: PM: fix compile error when !CONFIG_SUSPEND
MAINTAINERS: OMAP: hwmod: update hwmod code, data maintainership
OMAP4: Smartreflex framework extensions
OMAP4: hwmod: Add inital data for smartreflex modules.
OMAP4: PM: Program correct init voltages for scalable VDDs
OMAP4: Adding voltage driver support
OMAP4: Register voltage PMIC parameters with the voltage layer
OMAP3: PM: Program correct init voltages for VDD1 and VDD2
...
Fix up trivial conflict in arch/arm/plat-omap/Kconfig
Diffstat (limited to 'arch/arm/mach-omap1')
36 files changed, 1510 insertions, 451 deletions
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig index 5f64963..8d2f2da 100644 --- a/arch/arm/mach-omap1/Kconfig +++ b/arch/arm/mach-omap1/Kconfig @@ -152,20 +152,11 @@ config MACH_NOKIA770 config MACH_AMS_DELTA bool "Amstrad E3 (Delta)" depends on ARCH_OMAP1 && ARCH_OMAP15XX + select FIQ help Support for the Amstrad E3 (codename Delta) videophone. Say Y here if you have such a device. -config AMS_DELTA_FIQ - bool "Fast Interrupt Request (FIQ) support for the E3" - depends on MACH_AMS_DELTA - select FIQ - help - Provide a FIQ handler for the E3. - This allows for fast handling of interrupts generated - by the clock line of the E3 mailboard (or a PS/2 keyboard) - connected to the GPIO based external keyboard port. - config MACH_OMAP_GENERIC bool "Generic OMAP board" depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX) diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index 9a304d8..6ee1950 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := io.o id.o sram.o irq.o mux.o flash.o serial.o devices.o +obj-y := io.o id.o sram.o irq.o mux.o flash.o serial.o devices.o dma.o obj-y += clock.o clock_data.o opp_data.o obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o @@ -39,8 +39,8 @@ obj-$(CONFIG_MACH_OMAP_PALMTE) += board-palmte.o obj-$(CONFIG_MACH_OMAP_PALMZ71) += board-palmz71.o obj-$(CONFIG_MACH_OMAP_PALMTT) += board-palmtt.o obj-$(CONFIG_MACH_NOKIA770) += board-nokia770.o -obj-$(CONFIG_MACH_AMS_DELTA) += board-ams-delta.o -obj-$(CONFIG_AMS_DELTA_FIQ) += ams-delta-fiq.o ams-delta-fiq-handler.o +obj-$(CONFIG_MACH_AMS_DELTA) += board-ams-delta.o ams-delta-fiq.o \ + ams-delta-fiq-handler.o obj-$(CONFIG_MACH_SX1) += board-sx1.o board-sx1-mmc.o obj-$(CONFIG_MACH_HERALD) += board-htcherald.o @@ -49,6 +49,12 @@ ifeq ($(CONFIG_ARCH_OMAP15XX),y) obj-$(CONFIG_MACH_OMAP_INNOVATOR) += fpga.o endif +# GPIO +obj-$(CONFIG_ARCH_OMAP730) += gpio7xx.o +obj-$(CONFIG_ARCH_OMAP850) += gpio7xx.o +obj-$(CONFIG_ARCH_OMAP15XX) += gpio15xx.o +obj-$(CONFIG_ARCH_OMAP16XX) += gpio16xx.o + # LEDs support led-$(CONFIG_MACH_OMAP_H2) += leds-h2p2-debug.o led-$(CONFIG_MACH_OMAP_H3) += leds-h2p2-debug.o diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 1d4163b..bd0495a 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -28,6 +28,7 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <plat/io.h> #include <plat/board-ams-delta.h> #include <mach/gpio.h> #include <plat/keypad.h> @@ -42,84 +43,82 @@ static u8 ams_delta_latch1_reg; static u16 ams_delta_latch2_reg; -static int ams_delta_keymap[] = { +static const unsigned int ams_delta_keymap[] = { KEY(0, 0, KEY_F1), /* Advert */ - KEY(3, 0, KEY_COFFEE), /* Games */ - KEY(2, 0, KEY_QUESTION), /* Directory */ - KEY(3, 2, KEY_CONNECT), /* Internet */ - KEY(2, 1, KEY_SHOP), /* Services */ + KEY(0, 3, KEY_COFFEE), /* Games */ + KEY(0, 2, KEY_QUESTION), /* Directory */ + KEY(2, 3, KEY_CONNECT), /* Internet */ + KEY(1, 2, KEY_SHOP), /* Services */ KEY(1, 1, KEY_PHONE), /* VoiceMail */ - KEY(1, 0, KEY_DELETE), /* Delete */ + KEY(0, 1, KEY_DELETE), /* Delete */ KEY(2, 2, KEY_PLAY), /* Play */ - KEY(0, 1, KEY_PAGEUP), /* Up */ - KEY(3, 1, KEY_PAGEDOWN), /* Down */ - KEY(0, 2, KEY_EMAIL), /* ReadEmail */ - KEY(1, 2, KEY_STOP), /* Stop */ + KEY(1, 0, KEY_PAGEUP), /* Up */ + KEY(1, 3, KEY_PAGEDOWN), /* Down */ + KEY(2, 0, KEY_EMAIL), /* ReadEmail */ + KEY(2, 1, KEY_STOP), /* Stop */ /* Numeric keypad portion */ - KEY(7, 0, KEY_KP1), - KEY(6, 0, KEY_KP2), - KEY(5, 0, KEY_KP3), - KEY(7, 1, KEY_KP4), - KEY(6, 1, KEY_KP5), - KEY(5, 1, KEY_KP6), - KEY(7, 2, KEY_KP7), - KEY(6, 2, KEY_KP8), - KEY(5, 2, KEY_KP9), - KEY(6, 3, KEY_KP0), - KEY(7, 3, KEY_KPASTERISK), - KEY(5, 3, KEY_KPDOT), /* # key */ - KEY(2, 7, KEY_NUMLOCK), /* Mute */ - KEY(1, 7, KEY_KPMINUS), /* Recall */ - KEY(1, 6, KEY_KPPLUS), /* Redial */ - KEY(6, 7, KEY_KPSLASH), /* Handsfree */ - KEY(0, 6, KEY_ENTER), /* Video */ - - KEY(4, 7, KEY_CAMERA), /* Photo */ - - KEY(4, 0, KEY_F2), /* Home */ - KEY(4, 1, KEY_F3), /* Office */ - KEY(4, 2, KEY_F4), /* Mobile */ + KEY(0, 7, KEY_KP1), + KEY(0, 6, KEY_KP2), + KEY(0, 5, KEY_KP3), + KEY(1, 7, KEY_KP4), + KEY(1, 6, KEY_KP5), + KEY(1, 5, KEY_KP6), + KEY(2, 7, KEY_KP7), + KEY(2, 6, KEY_KP8), + KEY(2, 5, KEY_KP9), + KEY(3, 6, KEY_KP0), + KEY(3, 7, KEY_KPASTERISK), + KEY(3, 5, KEY_KPDOT), /* # key */ + KEY(7, 2, KEY_NUMLOCK), /* Mute */ + KEY(7, 1, KEY_KPMINUS), /* Recall */ + KEY(6, 1, KEY_KPPLUS), /* Redial */ + KEY(7, 6, KEY_KPSLASH), /* Handsfree */ + KEY(6, 0, KEY_ENTER), /* Video */ + + KEY(7, 4, KEY_CAMERA), /* Photo */ + + KEY(0, 4, KEY_F2), /* Home */ + KEY(1, 4, KEY_F3), /* Office */ + KEY(2, 4, KEY_F4), /* Mobile */ KEY(7, 7, KEY_F5), /* SMS */ - KEY(5, 7, KEY_F6), /* Email */ + KEY(7, 5, KEY_F6), /* Email */ /* QWERTY portion of keypad */ - KEY(4, 3, KEY_Q), + KEY(3, 4, KEY_Q), KEY(3, 3, KEY_W), - KEY(2, 3, KEY_E), - KEY(1, 3, KEY_R), - KEY(0, 3, KEY_T), - KEY(7, 4, KEY_Y), - KEY(6, 4, KEY_U), - KEY(5, 4, KEY_I), + KEY(3, 2, KEY_E), + KEY(3, 1, KEY_R), + KEY(3, 0, KEY_T), + KEY(4, 7, KEY_Y), + KEY(4, 6, KEY_U), + KEY(4, 5, KEY_I), KEY(4, 4, KEY_O), - KEY(3, 4, KEY_P), + KEY(4, 3, KEY_P), - KEY(2, 4, KEY_A), - KEY(1, 4, KEY_S), - KEY(0, 4, KEY_D), - KEY(7, 5, KEY_F), - KEY(6, 5, KEY_G), + KEY(4, 2, KEY_A), + KEY(4, 1, KEY_S), + KEY(4, 0, KEY_D), + KEY(5, 7, KEY_F), + KEY(5, 6, KEY_G), KEY(5, 5, KEY_H), - KEY(4, 5, KEY_J), - KEY(3, 5, KEY_K), - KEY(2, 5, KEY_L), + KEY(5, 4, KEY_J), + KEY(5, 3, KEY_K), + KEY(5, 2, KEY_L), - KEY(1, 5, KEY_Z), - KEY(0, 5, KEY_X), - KEY(7, 6, KEY_C), + KEY(5, 1, KEY_Z), + KEY(5, 0, KEY_X), + KEY(6, 7, KEY_C), KEY(6, 6, KEY_V), - KEY(5, 6, KEY_B), - KEY(4, 6, KEY_N), - KEY(3, 6, KEY_M), - KEY(2, 6, KEY_SPACE), + KEY(6, 5, KEY_B), + KEY(6, 4, KEY_N), + KEY(6, 3, KEY_M), + KEY(6, 2, KEY_SPACE), - KEY(0, 7, KEY_LEFTSHIFT), /* Vol up */ - KEY(3, 7, KEY_LEFTCTRL), /* Vol down */ - - 0 + KEY(7, 0, KEY_LEFTSHIFT), /* Vol up */ + KEY(7, 3, KEY_LEFTCTRL), /* Vol down */ }; void ams_delta_latch1_write(u8 mask, u8 value) @@ -140,7 +139,6 @@ static void __init ams_delta_init_irq(void) { omap1_init_common_hw(); omap_init_irq(); - omap_gpio_init(); } static struct map_desc ams_delta_io_desc[] __initdata = { @@ -189,11 +187,15 @@ static struct resource ams_delta_kp_resources[] = { }, }; +static const struct matrix_keymap_data ams_delta_keymap_data = { + .keymap = ams_delta_keymap, + .keymap_size = ARRAY_SIZE(ams_delta_keymap), +}; + static struct omap_kp_platform_data ams_delta_kp_data = { .rows = 8, .cols = 8, - .keymap = ams_delta_keymap, - .keymapsize = ARRAY_SIZE(ams_delta_keymap), + .keymap_data = &ams_delta_keymap_data, .delay = 9, }; @@ -307,16 +309,14 @@ static void __init ams_delta_init(void) #endif platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices)); -#ifdef CONFIG_AMS_DELTA_FIQ ams_delta_init_fiq(); -#endif omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1); } static struct plat_serial8250_port ams_delta_modem_ports[] = { { - .membase = (void *) AMS_DELTA_MODEM_VIRT, + .membase = IOMEM(AMS_DELTA_MODEM_VIRT), .mapbase = AMS_DELTA_MODEM_PHYS, .irq = -EINVAL, /* changed later */ .flags = UPF_BOOT_AUTOCONF, @@ -340,6 +340,9 @@ static int __init ams_delta_modem_init(void) { int err; + if (!machine_is_ams_delta()) + return -ENODEV; + omap_cfg_reg(M14_1510_GPIO2); ams_delta_modem_ports[0].irq = gpio_to_irq(AMS_DELTA_GPIO_PIN_MODEM_IRQ); diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 149fdd3..0efb9db 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -69,36 +69,35 @@ #define fsample_cpld_clear(bit) \ fsample_cpld_write(0xf0 | ((bit) & 15), FSAMPLE_CPLD_SET_CLR) -static int fsample_keymap[] = { - KEY(0,0,KEY_UP), - KEY(0,1,KEY_RIGHT), - KEY(0,2,KEY_LEFT), - KEY(0,3,KEY_DOWN), - KEY(0,4,KEY_ENTER), - KEY(1,0,KEY_F10), - KEY(1,1,KEY_SEND), - KEY(1,2,KEY_END), - KEY(1,3,KEY_VOLUMEDOWN), - KEY(1,4,KEY_VOLUMEUP), - KEY(1,5,KEY_RECORD), - KEY(2,0,KEY_F9), - KEY(2,1,KEY_3), - KEY(2,2,KEY_6), - KEY(2,3,KEY_9), - KEY(2,4,KEY_KPDOT), - KEY(3,0,KEY_BACK), - KEY(3,1,KEY_2), - KEY(3,2,KEY_5), - KEY(3,3,KEY_8), - KEY(3,4,KEY_0), - KEY(3,5,KEY_KPSLASH), - KEY(4,0,KEY_HOME), - KEY(4,1,KEY_1), - KEY(4,2,KEY_4), - KEY(4,3,KEY_7), - KEY(4,4,KEY_KPASTERISK), - KEY(4,5,KEY_POWER), - 0 +static const unsigned int fsample_keymap[] = { + KEY(0, 0, KEY_UP), + KEY(1, 0, KEY_RIGHT), + KEY(2, 0, KEY_LEFT), + KEY(3, 0, KEY_DOWN), + KEY(4, 0, KEY_ENTER), + KEY(0, 1, KEY_F10), + KEY(1, 1, KEY_SEND), + KEY(2, 1, KEY_END), + KEY(3, 1, KEY_VOLUMEDOWN), + KEY(4, 1, KEY_VOLUMEUP), + KEY(5, 1, KEY_RECORD), + KEY(0, 2, KEY_F9), + KEY(1, 2, KEY_3), + KEY(2, 2, KEY_6), + KEY(3, 2, KEY_9), + KEY(4, 2, KEY_KPDOT), + KEY(0, 3, KEY_BACK), + KEY(1, 3, KEY_2), + KEY(2, 3, KEY_5), + KEY(3, 3, KEY_8), + KEY(4, 3, KEY_0), + KEY(5, 3, KEY_KPSLASH), + KEY(0, 4, KEY_HOME), + KEY(1, 4, KEY_1), + KEY(2, 4, KEY_4), + KEY(3, 4, KEY_7), + KEY(4, 4, KEY_KPASTERISK), + KEY(5, 4, KEY_POWER), }; static struct smc91x_platdata smc91x_info = { @@ -120,6 +119,15 @@ static struct resource smc91x_resources[] = { }, }; +static void __init fsample_init_smc91x(void) +{ + fpga_write(1, H2P2_DBG_FPGA_LAN_RESET); + mdelay(50); + fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1, + H2P2_DBG_FPGA_LAN_RESET); + mdelay(50); +} + static struct mtd_partition nor_partitions[] = { /* bootloader (U-Boot, etc) in first sector */ { @@ -244,11 +252,15 @@ static struct resource kp_resources[] = { }, }; +static const struct matrix_keymap_data fsample_keymap_data = { + .keymap = fsample_keymap, + .keymap_size = ARRAY_SIZE(fsample_keymap), +}; + static struct omap_kp_platform_data kp_data = { .rows = 8, .cols = 8, - .keymap = fsample_keymap, - .keymapsize = ARRAY_SIZE(fsample_keymap), + .keymap_data = &fsample_keymap_data, .delay = 4, }; @@ -285,6 +297,8 @@ static struct omap_board_config_kernel fsample_config[] = { static void __init omap_fsample_init(void) { + fsample_init_smc91x(); + if (gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0) BUG(); gpio_direction_input(FSAMPLE_NAND_RB_GPIO_PIN); @@ -312,21 +326,10 @@ static void __init omap_fsample_init(void) omap_register_i2c_bus(1, 100, NULL, 0); } -static void __init fsample_init_smc91x(void) -{ - fpga_write(1, H2P2_DBG_FPGA_LAN_RESET); - mdelay(50); - fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1, - H2P2_DBG_FPGA_LAN_RESET); - mdelay(50); -} - static void __init omap_fsample_init_irq(void) { omap1_init_common_hw(); omap_init_irq(); - omap_gpio_init(); - fsample_init_smc91x(); } /* Only FPGA needs to be mapped here. All others are done with ioremap */ diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 197adb4..28b84aa 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -52,43 +52,42 @@ /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ #define OMAP1610_ETHR_START 0x04000300 -static int h2_keymap[] = { +static const unsigned int h2_keymap[] = { KEY(0, 0, KEY_LEFT), - KEY(0, 1, KEY_RIGHT), - KEY(0, 2, KEY_3), - KEY(0, 3, KEY_F10), - KEY(0, 4, KEY_F5), - KEY(0, 5, KEY_9), - KEY(1, 0, KEY_DOWN), + KEY(1, 0, KEY_RIGHT), + KEY(2, 0, KEY_3), + KEY(3, 0, KEY_F10), + KEY(4, 0, KEY_F5), + KEY(5, 0, KEY_9), + KEY(0, 1, KEY_DOWN), KEY(1, 1, KEY_UP), - KEY(1, 2, KEY_2), - KEY(1, 3, KEY_F9), - KEY(1, 4, KEY_F7), - KEY(1, 5, KEY_0), - KEY(2, 0, KEY_ENTER), - KEY(2, 1, KEY_6), + KEY(2, 1, KEY_2), + KEY(3, 1, KEY_F9), + KEY(4, 1, KEY_F7), + KEY(5, 1, KEY_0), + KEY(0, 2, KEY_ENTER), + KEY(1, 2, KEY_6), KEY(2, 2, KEY_1), - KEY(2, 3, KEY_F2), - KEY(2, 4, KEY_F6), - KEY(2, 5, KEY_HOME), - KEY(3, 0, KEY_8), - KEY(3, 1, KEY_5), - KEY(3, 2, KEY_F12), + KEY(3, 2, KEY_F2), + KEY(4, 2, KEY_F6), + KEY(5, 2, KEY_HOME), + KEY(0, 3, KEY_8), + KEY(1, 3, KEY_5), + KEY(2, 3, KEY_F12), KEY(3, 3, KEY_F3), - KEY(3, 4, KEY_F8), - KEY(3, 5, KEY_END), - KEY(4, 0, KEY_7), - KEY(4, 1, KEY_4), - KEY(4, 2, KEY_F11), - KEY(4, 3, KEY_F1), + KEY(4, 3, KEY_F8), + KEY(5, 3, KEY_END), + KEY(0, 4, KEY_7), + KEY(1, 4, KEY_4), + KEY(2, 4, KEY_F11), + KEY(3, 4, KEY_F1), KEY(4, 4, KEY_F4), - KEY(4, 5, KEY_ESC), - KEY(5, 0, KEY_F13), - KEY(5, 1, KEY_F14), - KEY(5, 2, KEY_F15), - KEY(5, 3, KEY_F16), - KEY(5, 4, KEY_SLEEP), - 0 + KEY(5, 4, KEY_ESC), + KEY(0, 5, KEY_F13), + KEY(1, 5, KEY_F14), + KEY(2, 5, KEY_F15), + KEY(3, 5, KEY_F16), + KEY(4, 5, KEY_SLEEP), }; static struct mtd_partition h2_nor_partitions[] = { @@ -270,14 +269,18 @@ static struct resource h2_kp_resources[] = { }, }; +static const struct matrix_keymap_data h2_keymap_data = { + .keymap = h2_keymap, + .keymap_size = ARRAY_SIZE(h2_keymap), +}; + static struct omap_kp_platform_data h2_kp_data = { .rows = 8, .cols = 8, - .keymap = h2_keymap, - .keymapsize = ARRAY_SIZE(h2_keymap), - .rep = 1, + .keymap_data = &h2_keymap_data, + .rep = true, .delay = 9, - .dbounce = 1, + .dbounce = true, }; static struct platform_device h2_kp_device = { @@ -374,8 +377,6 @@ static void __init h2_init_irq(void) { omap1_init_common_hw(); omap_init_irq(); - omap_gpio_init(); - h2_init_smc91x(); } static struct omap_usb_config h2_usb_config __initdata = { @@ -403,6 +404,8 @@ static struct omap_board_config_kernel h2_config[] __initdata = { static void __init h2_init(void) { + h2_init_smc91x(); + /* Here we assume the NOR boot config: NOR on CS3 (possibly swapped * to address 0 by a dip switch), NAND on CS2B. The NAND driver will * notice whether a NAND chip is enabled at probe time. diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 9126e3e..dbc8b8d 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -56,43 +56,42 @@ #define H3_TS_GPIO 48 -static int h3_keymap[] = { +static const unsigned int h3_keymap[] = { KEY(0, 0, KEY_LEFT), - KEY(0, 1, KEY_RIGHT), - KEY(0, 2, KEY_3), - KEY(0, 3, KEY_F10), - KEY(0, 4, KEY_F5), - KEY(0, 5, KEY_9), - KEY(1, 0, KEY_DOWN), + KEY(1, 0, KEY_RIGHT), + KEY(2, 0, KEY_3), + KEY(3, 0, KEY_F10), + KEY(4, 0, KEY_F5), + KEY(5, 0, KEY_9), + KEY(0, 1, KEY_DOWN), KEY(1, 1, KEY_UP), - KEY(1, 2, KEY_2), - KEY(1, 3, KEY_F9), - KEY(1, 4, KEY_F7), - KEY(1, 5, KEY_0), - KEY(2, 0, KEY_ENTER), - KEY(2, 1, KEY_6), + KEY(2, 1, KEY_2), + KEY(3, 1, KEY_F9), + KEY(4, 1, KEY_F7), + KEY(5, 1, KEY_0), + KEY(0, 2, KEY_ENTER), + KEY(1, 2, KEY_6), KEY(2, 2, KEY_1), - KEY(2, 3, KEY_F2), - KEY(2, 4, KEY_F6), - KEY(2, 5, KEY_HOME), - KEY(3, 0, KEY_8), - KEY(3, 1, KEY_5), - KEY(3, 2, KEY_F12), + KEY(3, 2, KEY_F2), + KEY(4, 2, KEY_F6), + KEY(5, 2, KEY_HOME), + KEY(0, 3, KEY_8), + KEY(1, 3, KEY_5), + KEY(2, 3, KEY_F12), KEY(3, 3, KEY_F3), - KEY(3, 4, KEY_F8), - KEY(3, 5, KEY_END), - KEY(4, 0, KEY_7), - KEY(4, 1, KEY_4), - KEY(4, 2, KEY_F11), - KEY(4, 3, KEY_F1), + KEY(4, 3, KEY_F8), + KEY(5, 3, KEY_END), + KEY(0, 4, KEY_7), + KEY(1, 4, KEY_4), + KEY(2, 4, KEY_F11), + KEY(3, 4, KEY_F1), KEY(4, 4, KEY_F4), - KEY(4, 5, KEY_ESC), - KEY(5, 0, KEY_F13), - KEY(5, 1, KEY_F14), - KEY(5, 2, KEY_F15), - KEY(5, 3, KEY_F16), - KEY(5, 4, KEY_SLEEP), - 0 + KEY(5, 4, KEY_ESC), + KEY(0, 5, KEY_F13), + KEY(1, 5, KEY_F14), + KEY(2, 5, KEY_F15), + KEY(3, 5, KEY_F16), + KEY(4, 5, KEY_SLEEP), }; @@ -264,6 +263,15 @@ static struct platform_device smc91x_device = { .resource = smc91x_resources, }; +static void __init h3_init_smc91x(void) +{ + omap_cfg_reg(W15_1710_GPIO40); + if (gpio_request(40, "SMC91x irq") < 0) { + printk("Error requesting gpio 40 for smc91x irq\n"); + return; + } +} + #define GPTIMER_BASE 0xFFFB1400 #define GPTIMER_REGS(x) (0xFFFB1400 + (x * 0x800)) #define GPTIMER_REGS_SIZE 0x46 @@ -296,14 +304,18 @@ static struct resource h3_kp_resources[] = { }, }; +static const struct matrix_keymap_data h3_keymap_data = { + .keymap = h3_keymap, + .keymap_size = ARRAY_SIZE(h3_keymap), +}; + static struct omap_kp_platform_data h3_kp_data = { .rows = 8, .cols = 8, - .keymap = h3_keymap, - .keymapsize = ARRAY_SIZE(h3_keymap), - .rep = 1, + .keymap_data = &h3_keymap_data, + .rep = true, .delay = 9, - .dbounce = 1, + .dbounce = true, }; static struct platform_device h3_kp_device = { @@ -376,6 +388,8 @@ static struct i2c_board_info __initdata h3_i2c_board_info[] = { static void __init h3_init(void) { + h3_init_smc91x(); + /* Here we assume the NOR boot config: NOR on CS3 (possibly swapped * to address 0 by a dip switch), NAND on CS2B. The NAND driver will * notice whether a NAND chip is enabled at probe time. @@ -422,21 +436,10 @@ static void __init h3_init(void) h3_mmc_init(); } -static void __init h3_init_smc91x(void) -{ - omap_cfg_reg(W15_1710_GPIO40); - if (gpio_request(40, "SMC91x irq") < 0) { - printk("Error requesting gpio 40 for smc91x irq\n"); - return; - } -} - static void __init h3_init_irq(void) { omap1_init_common_hw(); omap_init_irq(); - omap_gpio_init(); - h3_init_smc91x(); } static void __init h3_map_io(void) diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index 071af3e..f2c5c58 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -180,64 +180,68 @@ /* Keyboard definition */ -static int htc_herald_keymap[] = { +static const unsigned int htc_herald_keymap[] = { KEY(0, 0, KEY_RECORD), /* Mail button */ - KEY(0, 1, KEY_CAMERA), /* Camera */ - KEY(0, 2, KEY_PHONE), /* Send key */ - KEY(0, 3, KEY_VOLUMEUP), /* Volume up */ - KEY(0, 4, KEY_F2), /* Right bar (landscape) */ - KEY(0, 5, KEY_MAIL), /* Win key (portrait) */ - KEY(0, 6, KEY_DIRECTORY), /* Right bar (protrait) */ - KEY(1, 0, KEY_LEFTCTRL), /* Windows key */ + KEY(1, 0, KEY_CAMERA), /* Camera */ + KEY(2, 0, KEY_PHONE), /* Send key */ + KEY(3, 0, KEY_VOLUMEUP), /* Volume up */ + KEY(4, 0, KEY_F2), /* Right bar (landscape) */ + KEY(5, 0, KEY_MAIL), /* Win key (portrait) */ + KEY(6, 0, KEY_DIRECTORY), /* Right bar (protrait) */ + KEY(0, 1, KEY_LEFTCTRL), /* Windows key */ KEY(1, 1, KEY_COMMA), - KEY(1, 2, KEY_M), - KEY(1, 3, KEY_K), - KEY(1, 4, KEY_SLASH), /* OK key */ - KEY(1, 5, KEY_I), - KEY(1, 6, KEY_U), - KEY(2, 0, KEY_LEFTALT), - KEY(2, 1, KEY_TAB), + KEY(2, 1, KEY_M), + KEY(3, 1, KEY_K), + KEY(4, 1, KEY_SLASH), /* OK key */ + KEY(5, 1, KEY_I), + KEY(6, 1, KEY_U), + KEY(0, 2, KEY_LEFTALT), + KEY(1, 2, KEY_TAB), KEY(2, 2, KEY_N), - KEY(2, 3, KEY_J), - KEY(2, 4, KEY_ENTER), - KEY(2, 5, KEY_H), - KEY(2, 6, KEY_Y), - KEY(3, 0, KEY_SPACE), - KEY(3, 1, KEY_L), - KEY(3, 2, KEY_B), + KEY(3, 2, KEY_J), + KEY(4, 2, KEY_ENTER), + KEY(5, 2, KEY_H), + KEY(6, 2, KEY_Y), + KEY(0, 3, KEY_SPACE), + KEY(1, 3, KEY_L), + KEY(2, 3, KEY_B), KEY(3, 3, KEY_V), - KEY(3, 4, KEY_BACKSPACE), - KEY(3, 5, KEY_G), - KEY(3, 6, KEY_T), - KEY(4, 0, KEY_CAPSLOCK), /* Shift */ - KEY(4, 1, KEY_C), - KEY(4, 2, KEY_F), - KEY(4, 3, KEY_R), + KEY(4, 3, KEY_BACKSPACE), + KEY(5, 3, KEY_G), + KEY(6, 3, KEY_T), + KEY(0, 4, KEY_CAPSLOCK), /* Shift */ + KEY(1, 4, KEY_C), + KEY(2, 4, KEY_F), + KEY(3, 4, KEY_R), KEY(4, 4, KEY_O), - KEY(4, 5, KEY_E), - KEY(4, 6, KEY_D), - KEY(5, 0, KEY_X), - KEY(5, 1, KEY_Z), - KEY(5, 2, KEY_S), - KEY(5, 3, KEY_W), - KEY(5, 4, KEY_P), + KEY(5, 4, KEY_E), + KEY(6, 4, KEY_D), + KEY(0, 5, KEY_X), + KEY(1, 5, KEY_Z), + KEY(2, 5, KEY_S), + KEY(3, 5, KEY_W), + KEY(4, 5, KEY_P), KEY(5, 5, KEY_Q), - KEY(5, 6, KEY_A), - KEY(6, 0, KEY_CONNECT), /* Voice button */ - KEY(6, 2, KEY_CANCEL), /* End key */ - KEY(6, 3, KEY_VOLUMEDOWN), /* Volume down */ - KEY(6, 4, KEY_F1), /* Left bar (landscape) */ - KEY(6, 5, KEY_WWW), /* OK button (portrait) */ + KEY(6, 5, KEY_A), + KEY(0, 6, KEY_CONNECT), /* Voice button */ + KEY(2, 6, KEY_CANCEL), /* End key */ + KEY(3, 6, KEY_VOLUMEDOWN), /* Volume down */ + KEY(4, 6, KEY_F1), /* Left bar (landscape) */ + KEY(5, 6, KEY_WWW), /* OK button (portrait) */ KEY(6, 6, KEY_CALENDAR), /* Left bar (portrait) */ - 0 }; -struct omap_kp_platform_data htcherald_kp_data = { +static const struct matrix_keymap_data htc_herald_keymap_data = { + .keymap = htc_herald_keymap, + .keymap_size = ARRAY_SIZE(htc_herald_keymap), +}; + +static struct omap_kp_platform_data htcherald_kp_data = { .rows = 7, .cols = 7, .delay = 20, - .rep = 1, - .keymap = htc_herald_keymap, + .rep = true, + .keymap_data = &htc_herald_keymap_data, }; static struct resource kp_resources[] = { @@ -278,7 +282,7 @@ static struct gpio_keys_button herald_gpio_keys_table[] = { static struct gpio_keys_platform_data herald_gpio_keys_data = { .buttons = herald_gpio_keys_table, .nbuttons = ARRAY_SIZE(herald_gpio_keys_table), - .rep = 1, + .rep = true, }; static struct platform_device herald_gpiokeys_device = { @@ -439,7 +443,7 @@ static const struct ads7846_platform_data htcherald_ts_platform_data = { .keep_vref_on = 1, .x_plate_ohms = 496, .gpio_pendown = HTCHERALD_GPIO_TS, - .pressure_max = 100000, + .pressure_max = 10000, .pressure_min = 5000, .x_min = 528, .x_max = 3760, @@ -577,8 +581,6 @@ static void __init htcherald_init(void) printk(KERN_INFO "HTC Herald init.\n"); /* Do board initialization before we register all the devices */ - omap_gpio_init(); - omap_board_config = htcherald_config; omap_board_config_size = ARRAY_SIZE(htcherald_config); platform_add_devices(devices, ARRAY_SIZE(devices)); diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index dc2b86f..a36e674 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -44,17 +44,16 @@ /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ #define INNOVATOR1610_ETHR_START 0x04000300 -static int innovator_keymap[] = { +static const unsigned int innovator_keymap[] = { KEY(0, 0, KEY_F1), - KEY(0, 3, KEY_DOWN), + KEY(3, 0, KEY_DOWN), KEY(1, 1, KEY_F2), - KEY(1, 2, KEY_RIGHT), - KEY(2, 0, KEY_F3), - KEY(2, 1, KEY_F4), + KEY(2, 1, KEY_RIGHT), + KEY(0, 2, KEY_F3), + KEY(1, 2, KEY_F4), KEY(2, 2, KEY_UP), - KEY(3, 2, KEY_ENTER), + KEY(2, 3, KEY_ENTER), KEY(3, 3, KEY_LEFT), - 0 }; static struct mtd_partition innovator_partitions[] = { @@ -126,11 +125,15 @@ static struct resource innovator_kp_resources[] = { }, }; +static const struct matrix_keymap_data innovator_keymap_data = { + .keymap = innovator_keymap, + .keymap_size = ARRAY_SIZE(innovator_keymap), +}; + static struct omap_kp_platform_data innovator_kp_data = { .rows = 8, .cols = 8, - .keymap = innovator_keymap, - .keymapsize = ARRAY_SIZE(innovator_keymap), + .keymap_data = &innovator_keymap_data, .delay = 4, }; @@ -290,13 +293,6 @@ static void __init innovator_init_irq(void) { omap1_init_common_hw(); omap_init_irq(); - omap_gpio_init(); -#ifdef CONFIG_ARCH_OMAP15XX - if (cpu_is_omap1510()) { - omap1510_fpga_init_irq(); - } -#endif - innovator_init_smc91x(); } #ifdef CONFIG_ARCH_OMAP15XX @@ -387,6 +383,10 @@ static struct omap_board_config_kernel innovator_config[] = { static void __init innovator_init(void) { + if (cpu_is_omap1510()) + omap1510_fpga_init_irq(); + innovator_init_smc91x(); + #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { unsigned char reg; diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index aa8375b..d21f09d 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -54,19 +54,18 @@ static void __init omap_nokia770_init_irq(void) omap_init_irq(); } -static int nokia770_keymap[] = { - KEY(0, 1, GROUP_0 | KEY_UP), - KEY(0, 2, GROUP_1 | KEY_F5), - KEY(1, 0, GROUP_0 | KEY_LEFT), +static const unsigned int nokia770_keymap[] = { + KEY(1, 0, GROUP_0 | KEY_UP), + KEY(2, 0, GROUP_1 | KEY_F5), + KEY(0, 1, GROUP_0 | KEY_LEFT), KEY(1, 1, GROUP_0 | KEY_ENTER), - KEY(1, 2, GROUP_0 | KEY_RIGHT), - KEY(2, 0, GROUP_1 | KEY_ESC), - KEY(2, 1, GROUP_0 | KEY_DOWN), + KEY(2, 1, GROUP_0 | KEY_RIGHT), + KEY(0, 2, GROUP_1 | KEY_ESC), + KEY(1, 2, GROUP_0 | KEY_DOWN), KEY(2, 2, GROUP_1 | KEY_F4), - KEY(3, 0, GROUP_2 | KEY_F7), - KEY(3, 1, GROUP_2 | KEY_F8), - KEY(3, 2, GROUP_2 | KEY_F6), - 0 + KEY(0, 3, GROUP_2 | KEY_F7), + KEY(1, 3, GROUP_2 | KEY_F8), + KEY(2, 3, GROUP_2 | KEY_F6), }; static struct resource nokia770_kp_resources[] = { @@ -77,11 +76,15 @@ static struct resource nokia770_kp_resources[] = { }, }; +static const struct matrix_keymap_data nokia770_keymap_data = { + .keymap = nokia770_keymap, + .keymap_size = ARRAY_SIZE(nokia770_keymap), +}; + static struct omap_kp_platform_data nokia770_kp_data = { .rows = 8, .cols = 8, - .keymap = nokia770_keymap, - .keymapsize = ARRAY_SIZE(nokia770_keymap), + .keymap_data = &nokia770_keymap_data, .delay = 4, }; @@ -246,7 +249,6 @@ static void __init omap_nokia770_init(void) platform_add_devices(nokia770_devices, ARRAY_SIZE(nokia770_devices)); spi_register_board_info(nokia770_spi_board_info, ARRAY_SIZE(nokia770_spi_board_info)); - omap_gpio_init(); omap_serial_init(); omap_register_i2c_bus(1, 100, NULL, 0); hwa742_dev_init(); diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index e9dd791..7c5e211 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -283,9 +283,6 @@ static void __init osk_init_irq(void) { omap1_init_common_hw(); omap_init_irq(); - omap_gpio_init(); - osk_init_smc91x(); - osk_init_cf(); } static struct omap_usb_config osk_usb_config __initdata = { @@ -341,25 +338,28 @@ static struct i2c_board_info __initdata mistral_i2c_board_info[] = { */ }; -static const int osk_keymap[] = { +static const unsigned int osk_keymap[] = { /* KEY(col, row, code) */ KEY(0, 0, KEY_F1), /* SW4 */ - KEY(0, 3, KEY_UP), /* (sw2/up) */ + KEY(3, 0, KEY_UP), /* (sw2/up) */ KEY(1, 1, KEY_LEFTCTRL), /* SW5 */ - KEY(1, 2, KEY_LEFT), /* (sw2/left) */ - KEY(2, 0, KEY_SPACE), /* SW3 */ - KEY(2, 1, KEY_ESC), /* SW6 */ + KEY(2, 1, KEY_LEFT), /* (sw2/left) */ + KEY(0, 2, KEY_SPACE), /* SW3 */ + KEY(1, 2, KEY_ESC), /* SW6 */ KEY(2, 2, KEY_DOWN), /* (sw2/down) */ - KEY(3, 2, KEY_ENTER), /* (sw2/select) */ + KEY(2, 3, KEY_ENTER), /* (sw2/select) */ KEY(3, 3, KEY_RIGHT), /* (sw2/right) */ - 0 +}; + +static const struct matrix_keymap_data osk_keymap_data = { + .keymap = osk_keymap, + .keymap_size = ARRAY_SIZE(osk_keymap), }; static struct omap_kp_platform_data osk_kp_data = { .rows = 8, .cols = 8, - .keymap = (int *) osk_keymap, - .keymapsize = ARRAY_SIZE(osk_keymap), + .keymap_data = &osk_keymap_data, .delay = 9, }; @@ -541,6 +541,9 @@ static void __init osk_init(void) { u32 l; + osk_init_smc91x(); + osk_init_cf(); + /* Workaround for wrong CS3 (NOR flash) timing * There are some U-Boot versions out there which configure * wrong CS3 memory timings. This mainly leads to CRC diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index f32738b..fb51ce6 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -63,28 +63,31 @@ static void __init omap_palmte_init_irq(void) { omap1_init_common_hw(); omap_init_irq(); - omap_gpio_init(); } -static const int palmte_keymap[] = { +static const unsigned int palmte_keymap[] = { KEY(0, 0, KEY_F1), /* Calendar */ - KEY(0, 1, KEY_F2), /* Contacts */ - KEY(0, 2, KEY_F3), /* Tasks List */ - KEY(0, 3, KEY_F4), /* Note Pad */ - KEY(0, 4, KEY_POWER), - KEY(1, 0, KEY_LEFT), + KEY(1, 0, KEY_F2), /* Contacts */ + KEY(2, 0, KEY_F3), /* Tasks List */ + KEY(3, 0, KEY_F4), /* Note Pad */ + KEY(4, 0, KEY_POWER), + KEY(0, 1, KEY_LEFT), KEY(1, 1, KEY_DOWN), - KEY(1, 2, KEY_UP), - KEY(1, 3, KEY_RIGHT), - KEY(1, 4, KEY_ENTER), - 0, + KEY(2, 1, KEY_UP), + KEY(3, 1, KEY_RIGHT), + KEY(4, 1, KEY_ENTER), +}; + +static const struct matrix_keymap_data palmte_keymap_data = { + .keymap = palmte_keymap, + .keymap_size = ARRAY_SIZE(palmte_keymap), }; static struct omap_kp_platform_data palmte_kp_data = { .rows = 8, .cols = 8, - .keymap = (int *) palmte_keymap, - .rep = 1, + .keymap_data = &palmte_keymap_data, + .rep = true, .delay = 12, }; diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index ed1400a..f04f2d3 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -51,19 +51,18 @@ #define PALMTT_MMC_WP_GPIO 8 #define PALMTT_HDQ_GPIO 11 -static int palmtt_keymap[] = { +static const unsigned int palmtt_keymap[] = { KEY(0, 0, KEY_ESC), - KEY(0, 1, KEY_SPACE), - KEY(0, 2, KEY_LEFTCTRL), - KEY(0, 3, KEY_TAB), - KEY(0, 4, KEY_ENTER), - KEY(1, 0, KEY_LEFT), + KEY(1, 0, KEY_SPACE), + KEY(2, 0, KEY_LEFTCTRL), + KEY(3, 0, KEY_TAB), + KEY(4, 0, KEY_ENTER), + KEY(0, 1, KEY_LEFT), KEY(1, 1, KEY_DOWN), - KEY(1, 2, KEY_UP), - KEY(1, 3, KEY_RIGHT), - KEY(2, 0, KEY_SLEEP), - KEY(2, 4, KEY_Y), - 0 + KEY(2, 1, KEY_UP), + KEY(3, 1, KEY_RIGHT), + KEY(0, 2, KEY_SLEEP), + KEY(4, 2, KEY_Y), }; static struct mtd_partition palmtt_partitions[] = { @@ -136,10 +135,15 @@ static struct resource palmtt_kp_resources[] = { }, }; +static const struct matrix_keymap_data palmtt_keymap_data = { + .keymap = palmtt_keymap, + .keymap_size = ARRAY_SIZE(palmtt_keymap), +}; + static struct omap_kp_platform_data palmtt_kp_data = { .rows = 6, .cols = 3, - .keymap = palmtt_keymap, + .keymap_data = &palmtt_keymap_data, }; static struct platform_device palmtt_kp_device = { diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index d7a245c..d7bbbe7 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -62,29 +62,32 @@ omap_palmz71_init_irq(void) { omap1_init_common_hw(); omap_init_irq(); - omap_gpio_init(); } -static int palmz71_keymap[] = { +static const unsigned int palmz71_keymap[] = { KEY(0, 0, KEY_F1), - KEY(0, 1, KEY_F2), - KEY(0, 2, KEY_F3), - KEY(0, 3, KEY_F4), - KEY(0, 4, KEY_POWER), - KEY(1, 0, KEY_LEFT), + KEY(1, 0, KEY_F2), + KEY(2, 0, KEY_F3), + KEY(3, 0, KEY_F4), + KEY(4, 0, KEY_POWER), + KEY(0, 1, KEY_LEFT), KEY(1, 1, KEY_DOWN), - KEY(1, 2, KEY_UP), - KEY(1, 3, KEY_RIGHT), - KEY(1, 4, KEY_ENTER), - KEY(2, 0, KEY_CAMERA), - 0, + KEY(2, 1, KEY_UP), + KEY(3, 1, KEY_RIGHT), + KEY(4, 1, KEY_ENTER), + KEY(0, 2, KEY_CAMERA), +}; + +static const struct matrix_keymap_data palmz71_keymap_data = { + .keymap = palmz71_keymap, + .keymap_size = ARRAY_SIZE(palmz71_keymap), }; static struct omap_kp_platform_data palmz71_kp_data = { .rows = 8, .cols = 8, - .keymap = palmz71_keymap, - .rep = 1, + .keymap_data = &palmz71_keymap_data, + .rep = true, .delay = 80, }; diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index a8d16a2..3c8ee84 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -36,36 +36,35 @@ #include <plat/common.h> #include <plat/board.h> -static int p2_keymap[] = { - KEY(0,0,KEY_UP), - KEY(0,1,KEY_RIGHT), - KEY(0,2,KEY_LEFT), - KEY(0,3,KEY_DOWN), - KEY(0,4,KEY_ENTER), - KEY(1,0,KEY_F10), - KEY(1,1,KEY_SEND), - KEY(1,2,KEY_END), - KEY(1,3,KEY_VOLUMEDOWN), - KEY(1,4,KEY_VOLUMEUP), - KEY(1,5,KEY_RECORD), - KEY(2,0,KEY_F9), - KEY(2,1,KEY_3), - KEY(2,2,KEY_6), - KEY(2,3,KEY_9), - KEY(2,4,KEY_KPDOT), - KEY(3,0,KEY_BACK), - KEY(3,1,KEY_2), - KEY(3,2,KEY_5), - KEY(3,3,KEY_8), - KEY(3,4,KEY_0), - KEY(3,5,KEY_KPSLASH), - KEY(4,0,KEY_HOME), - KEY(4,1,KEY_1), - KEY(4,2,KEY_4), - KEY(4,3,KEY_7), - KEY(4,4,KEY_KPASTERISK), - KEY(4,5,KEY_POWER), - 0 +static const unsigned int p2_keymap[] = { + KEY(0, 0, KEY_UP), + KEY(1, 0, KEY_RIGHT), + KEY(2, 0, KEY_LEFT), + KEY(3, 0, KEY_DOWN), + KEY(4, 0, KEY_ENTER), + KEY(0, 1, KEY_F10), + KEY(1, 1, KEY_SEND), + KEY(2, 1, KEY_END), + KEY(3, 1, KEY_VOLUMEDOWN), + KEY(4, 1, KEY_VOLUMEUP), + KEY(5, 1, KEY_RECORD), + KEY(0, 2, KEY_F9), + KEY(1, 2, KEY_3), + KEY(2, 2, KEY_6), + KEY(3, 2, KEY_9), + KEY(4, 2, KEY_KPDOT), + KEY(0, 3, KEY_BACK), + KEY(1, 3, KEY_2), + KEY(2, 3, KEY_5), + KEY(3, 3, KEY_8), + KEY(4, 3, KEY_0), + KEY(5, 3, KEY_KPSLASH), + KEY(0, 4, KEY_HOME), + KEY(1, 4, KEY_1), + KEY(2, 4, KEY_4), + KEY(3, 4, KEY_7), + KEY(4, 4, KEY_KPASTERISK), + KEY(5, 4, KEY_POWER), }; static struct smc91x_platdata smc91x_info = { @@ -211,13 +210,17 @@ static struct resource kp_resources[] = { }, }; +static const struct matrix_keymap_data p2_keymap_data = { + .keymap = p2_keymap, + .keymap_size = ARRAY_SIZE(p2_keymap), +}; + static struct omap_kp_platform_data kp_data = { .rows = 8, .cols = 8, - .keymap = p2_keymap, - .keymapsize = ARRAY_SIZE(p2_keymap), + .keymap_data = &p2_keymap_data, .delay = 4, - .dbounce = 1, + .dbounce = true, }; static struct platform_device kp_device = { @@ -251,8 +254,19 @@ static struct omap_board_config_kernel perseus2_config[] __initdata = { { OMAP_TAG_LCD, &perseus2_lcd_config }, }; +static void __init perseus2_init_smc91x(void) +{ + fpga_write(1, H2P2_DBG_FPGA_LAN_RESET); + mdelay(50); + fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1, + H2P2_DBG_FPGA_LAN_RESET); + mdelay(50); +} + static void __init omap_perseus2_init(void) { + perseus2_init_smc91x(); + if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0) BUG(); gpio_direction_input(P2_NAND_RB_GPIO_PIN); @@ -280,21 +294,10 @@ static void __init omap_perseus2_init(void) omap_register_i2c_bus(1, 100, NULL, 0); } -static void __init perseus2_init_smc91x(void) -{ - fpga_write(1, H2P2_DBG_FPGA_LAN_RESET); - mdelay(50); - fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1, - H2P2_DBG_FPGA_LAN_RESET); - mdelay(50); -} - static void __init omap_perseus2_init_irq(void) { omap1_init_common_hw(); omap_init_irq(); - omap_gpio_init(); - perseus2_init_smc91x(); } /* Only FPGA needs to be mapped here. All others are done with ioremap */ static struct map_desc omap_perseus2_io_desc[] __initdata = { diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index d25f59e..d41fe2d 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -164,36 +164,35 @@ EXPORT_SYMBOL(sx1_setusbpower); /*----------- Keypad -------------------------*/ -static int sx1_keymap[] = { - KEY(5, 3, GROUP_0 | 117), /* camera Qt::Key_F17 */ - KEY(0, 4, GROUP_0 | 114), /* voice memo Qt::Key_F14 */ - KEY(1, 4, GROUP_2 | 114), /* voice memo */ - KEY(2, 4, GROUP_3 | 114), /* voice memo */ +static const unsigned int sx1_keymap[] = { + KEY(3, 5, GROUP_0 | 117), /* camera Qt::Key_F17 */ + KEY(4, 0, GROUP_0 | 114), /* voice memo Qt::Key_F14 */ + KEY(4, 1, GROUP_2 | 114), /* voice memo */ + KEY(4, 2, GROUP_3 | 114), /* voice memo */ KEY(0, 0, GROUP_1 | KEY_F12), /* red button Qt::Key_Hangup */ - KEY(4, 3, GROUP_1 | KEY_LEFT), - KEY(2, 3, GROUP_1 | KEY_DOWN), - KEY(1, 3, GROUP_1 | KEY_RIGHT), - KEY(0, 3, GROUP_1 | KEY_UP), + KEY(3, 4, GROUP_1 | KEY_LEFT), + KEY(3, 2, GROUP_1 | KEY_DOWN), + KEY(3, 1, GROUP_1 | KEY_RIGHT), + KEY(3, 0, GROUP_1 | KEY_UP), KEY(3, 3, GROUP_1 | KEY_POWER), /* joystick press or Qt::Key_Select */ - KEY(5, 0, GROUP_1 | KEY_1), - KEY(4, 0, GROUP_1 | KEY_2), - KEY(3, 0, GROUP_1 | KEY_3), - KEY(3, 4, GROUP_1 | KEY_4), + KEY(0, 5, GROUP_1 | KEY_1), + KEY(0, 4, GROUP_1 | KEY_2), + KEY(0, 3, GROUP_1 | KEY_3), + KEY(4, 3, GROUP_1 | KEY_4), KEY(4, 4, GROUP_1 | KEY_5), - KEY(5, 4, GROUP_1 | KEY_KPASTERISK),/* "*" */ - KEY(4, 1, GROUP_1 | KEY_6), - KEY(5, 1, GROUP_1 | KEY_7), - KEY(3, 1, GROUP_1 | KEY_8), - KEY(3, 2, GROUP_1 | KEY_9), - KEY(5, 2, GROUP_1 | KEY_0), - KEY(4, 2, GROUP_1 | 113), /* # F13 Toggle input method Qt::Key_F13 */ - KEY(0, 1, GROUP_1 | KEY_F11), /* green button Qt::Key_Call */ - KEY(1, 2, GROUP_1 | KEY_YEN), /* left soft Qt::Key_Context1 */ + KEY(4, 5, GROUP_1 | KEY_KPASTERISK),/* "*" */ + KEY(1, 4, GROUP_1 | KEY_6), + KEY(1, 5, GROUP_1 | KEY_7), + KEY(1, 3, GROUP_1 | KEY_8), + KEY(2, 3, GROUP_1 | KEY_9), + KEY(2, 5, GROUP_1 | KEY_0), + KEY(2, 4, GROUP_1 | 113), /* # F13 Toggle input method Qt::Key_F13 */ + KEY(1, 0, GROUP_1 | KEY_F11), /* green button Qt::Key_Call */ + KEY(2, 1, GROUP_1 | KEY_YEN), /* left soft Qt::Key_Context1 */ KEY(2, 2, GROUP_1 | KEY_F8), /* right soft Qt::Key_Back */ - KEY(2, 1, GROUP_1 | KEY_LEFTSHIFT), /* shift */ + KEY(1, 2, GROUP_1 | KEY_LEFTSHIFT), /* shift */ KEY(1, 1, GROUP_1 | KEY_BACKSPACE), /* C (clear) */ - KEY(0, 2, GROUP_1 | KEY_F7), /* menu Qt::Key_Menu */ - 0 + KEY(2, 0, GROUP_1 | KEY_F7), /* menu Qt::Key_Menu */ }; static struct resource sx1_kp_resources[] = { @@ -204,11 +203,15 @@ static struct resource sx1_kp_resources[] = { }, }; +static const struct matrix_keymap_data sx1_keymap_data = { + .keymap = sx1_keymap, + .keymap_size = ARRAY_SIZE(sx1_keymap), +}; + static struct omap_kp_platform_data sx1_kp_data = { .rows = 6, .cols = 6, - .keymap = sx1_keymap, - .keymapsize = ARRAY_SIZE(sx1_keymap), + .keymap_data = &sx1_keymap_data, .delay = 80, }; @@ -409,7 +412,6 @@ static void __init omap_sx1_init_irq(void) { omap1_init_common_hw(); omap_init_irq(); - omap_gpio_init(); } /*----------------------------------------*/ diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index f5992c2..815a69c 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -83,6 +83,9 @@ static struct platform_device serial_device = { static int __init ext_uart_init(void) { + if (!machine_is_voiceblue()) + return -ENODEV; + return platform_device_register(&serial_device); } arch_initcall(ext_uart_init); @@ -158,7 +161,6 @@ static void __init voiceblue_init_irq(void) { omap1_init_common_hw(); omap_init_irq(); - omap_gpio_init(); } static void __init voiceblue_init(void) @@ -236,6 +238,9 @@ static struct notifier_block panic_block = { static int __init voiceblue_setup(void) { + if (!machine_is_voiceblue()) + return -ENODEV; + /* Setup panic notifier */ atomic_notifier_chain_register(&panic_notifier_list, &panic_block); diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index af54114..92400b9 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -143,7 +143,7 @@ static struct arm_idlect1_clk armper_ck = { * activation. [ GPIO code for 1510 ] */ static struct clk arm_gpio_ck = { - .name = "arm_gpio_ck", + .name = "ick", .ops = &clkops_generic, .parent = &ck_dpll1, .flags = ENABLE_ON_INIT, @@ -684,7 +684,7 @@ static struct omap_clk omap_clks[] = { CLK(NULL, "ck_sossi", &sossi_ck, CK_16XX), CLK(NULL, "arm_ck", &arm_ck, CK_16XX | CK_1510 | CK_310), CLK(NULL, "armper_ck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "arm_gpio_ck", &arm_gpio_ck, CK_1510 | CK_310), + CLK("omap_gpio.0", "ick", &arm_gpio_ck, CK_1510 | CK_310), CLK(NULL, "armxor_ck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), CLK(NULL, "armtim_ck", &armtim_ck.clk, CK_16XX | CK_1510 | CK_310), CLK("omap_wdt", "fck", &armwdt_ck.clk, CK_16XX | CK_1510 | CK_310), @@ -736,9 +736,9 @@ static struct omap_clk omap_clks[] = { CLK("mmci-omap.1", "ick", &armper_ck.clk, CK_16XX), /* Virtual clocks */ CLK(NULL, "mpu", &virtual_ck_mpu, CK_16XX | CK_1510 | CK_310), - CLK("i2c_omap.1", "fck", &i2c_fck, CK_16XX | CK_1510 | CK_310 | CK_7XX), - CLK("i2c_omap.1", "ick", &i2c_ick, CK_16XX), - CLK("i2c_omap.1", "ick", &dummy_ck, CK_1510 | CK_310 | CK_7XX), + CLK("omap_i2c.1", "fck", &i2c_fck, CK_16XX | CK_1510 | CK_310 | CK_7XX), + CLK("omap_i2c.1", "ick", &i2c_ick, CK_16XX), + CLK("omap_i2c.1", "ick", &dummy_ck, CK_1510 | CK_310 | CK_7XX), CLK("omap1_spi100k.1", "fck", &dummy_ck, CK_7XX), CLK("omap1_spi100k.1", "ick", &dummy_ck, CK_7XX), CLK("omap1_spi100k.2", "fck", &dummy_ck, CK_7XX), @@ -823,12 +823,10 @@ int __init omap1_clk_init(void) crystal_type = info->system_clock_type; } -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - ck_ref.rate = 13000000; -#elif defined(CONFIG_ARCH_OMAP16XX) - if (crystal_type == 2) + if (cpu_is_omap7xx()) + ck_ref.rate = 13000000; + if (cpu_is_omap16xx() && crystal_type == 2) ck_ref.rate = 19200000; -#endif pr_info("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: " "0x%04x\n", omap_readw(ARM_SYSST), omap_readw(DPLL_CTL), @@ -883,10 +881,11 @@ int __init omap1_clk_init(void) ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10, arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10); -#if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE) - /* Select slicer output as OMAP input clock */ - omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1, OMAP7XX_PCC_UPLD_CTRL); -#endif + if (machine_is_omap_perseus2() || machine_is_omap_fsample()) { + /* Select slicer output as OMAP input clock */ + omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1, + OMAP7XX_PCC_UPLD_CTRL); + } /* Amstrad Delta wants BCLK high when inactive */ if (machine_is_ams_delta()) diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index e7f9ee6..b0f4c23 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -17,6 +17,7 @@ #include <linux/io.h> #include <linux/spi/spi.h> +#include <mach/camera.h> #include <mach/hardware.h> #include <asm/mach/map.h> @@ -287,6 +288,9 @@ static inline void omap_init_audio(void) {} */ static int __init omap1_init_devices(void) { + if (!cpu_class_is_omap1()) + return -ENODEV; + /* please keep these calls, and their implementations above, * in alphabetical order so they're easier to sort through. */ diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c new file mode 100644 index 0000000..d855934 --- /dev/null +++ b/arch/arm/mach-omap1/dma.c @@ -0,0 +1,390 @@ +/* + * OMAP1/OMAP7xx - specific DMA driver + * + * Copyright (C) 2003 - 2008 Nokia Corporation + * Author: Juha Yrjölä <juha.yrjola@nokia.com> + * DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com> + * Graphics DMA and LCD DMA graphics tranformations + * by Imre Deak <imre.deak@nokia.com> + * OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc. + * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc. + * + * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ + * Converted DMA library into platform driver + * - G, Manjunath Kondaiah <manjugk@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/err.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/device.h> + +#include <plat/dma.h> +#include <plat/tc.h> +#include <plat/irqs.h> + +#define OMAP1_DMA_BASE (0xfffed800) +#define OMAP1_LOGICAL_DMA_CH_COUNT 17 +#define OMAP1_DMA_STRIDE 0x40 + +static u32 errata; +static u32 enable_1510_mode; +static u8 dma_stride; +static enum omap_reg_offsets dma_common_ch_start, dma_common_ch_end; + +static u16 reg_map[] = { + [GCR] = 0x400, + [GSCR] = 0x404, + [GRST1] = 0x408, + [HW_ID] = 0x442, + [PCH2_ID] = 0x444, + [PCH0_ID] = 0x446, + [PCH1_ID] = 0x448, + [PCHG_ID] = 0x44a, + [PCHD_ID] = 0x44c, + [CAPS_0] = 0x44e, + [CAPS_1] = 0x452, + [CAPS_2] = 0x456, + [CAPS_3] = 0x458, + [CAPS_4] = 0x45a, + [PCH2_SR] = 0x460, + [PCH0_SR] = 0x480, + [PCH1_SR] = 0x482, + [PCHD_SR] = 0x4c0, + + /* Common Registers */ + [CSDP] = 0x00, + [CCR] = 0x02, + [CICR] = 0x04, + [CSR] = 0x06, + [CEN] = 0x10, + [CFN] = 0x12, + [CSFI] = 0x14, + [CSEI] = 0x16, + [CPC] = 0x18, /* 15xx only */ + [CSAC] = 0x18, + [CDAC] = 0x1a, + [CDEI] = 0x1c, + [CDFI] = 0x1e, + [CLNK_CTRL] = 0x28, + + /* Channel specific register offsets */ + [CSSA] = 0x08, + [CDSA] = 0x0c, + [COLOR] = 0x20, + [CCR2] = 0x24, + [LCH_CTRL] = 0x2a, +}; + +static struct resource res[] __initdata = { + [0] = { + .start = OMAP1_DMA_BASE, + .end = OMAP1_DMA_BASE + SZ_2K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = "0", + .start = INT_DMA_CH0_6, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .name = "1", + .start = INT_DMA_CH1_7, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .name = "2", + .start = INT_DMA_CH2_8, + .flags = IORESOURCE_IRQ, + }, + [4] = { + .name = "3", + .start = INT_DMA_CH3, + .flags = IORESOURCE_IRQ, + }, + [5] = { + .name = "4", + .start = INT_DMA_CH4, + .flags = IORESOURCE_IRQ, + }, + [6] = { + .name = "5", + .start = INT_DMA_CH5, + .flags = IORESOURCE_IRQ, + }, + /* Handled in lcd_dma.c */ + [7] = { + .name = "6", + .start = INT_1610_DMA_CH6, + .flags = IORESOURCE_IRQ, + }, + /* irq's for omap16xx and omap7xx */ + [8] = { + .name = "7", + .start = INT_1610_DMA_CH7, + .flags = IORESOURCE_IRQ, + }, + [9] = { + .name = "8", + .start = INT_1610_DMA_CH8, + .flags = IORESOURCE_IRQ, + }, + [10] = { + .name = "9", + .start = INT_1610_DMA_CH9, + .flags = IORESOURCE_IRQ, + }, + [11] = { + .name = "10", + .start = INT_1610_DMA_CH10, + .flags = IORESOURCE_IRQ, + }, + [12] = { + .name = "11", + .start = INT_1610_DMA_CH11, + .flags = IORESOURCE_IRQ, + }, + [13] = { + .name = "12", + .start = INT_1610_DMA_CH12, + .flags = IORESOURCE_IRQ, + }, + [14] = { + .name = "13", + .start = INT_1610_DMA_CH13, + .flags = IORESOURCE_IRQ, + }, + [15] = { + .name = "14", + .start = INT_1610_DMA_CH14, + .flags = IORESOURCE_IRQ, + }, + [16] = { + .name = "15", + .start = INT_1610_DMA_CH15, + .flags = IORESOURCE_IRQ, + }, + [17] = { + .name = "16", + .start = INT_DMA_LCD, + .flags = IORESOURCE_IRQ, + }, +}; + +static void __iomem *dma_base; +static inline void dma_write(u32 val, int reg, int lch) +{ + u8 stride; + u32 offset; + + stride = (reg >= dma_common_ch_start) ? dma_stride : 0; + offset = reg_map[reg] + (stride * lch); + + __raw_writew(val, dma_base + offset); + if ((reg > CLNK_CTRL && reg < CCEN) || + (reg > PCHD_ID && reg < CAPS_2)) { + u32 offset2 = reg_map[reg] + 2 + (stride * lch); + __raw_writew(val >> 16, dma_base + offset2); + } +} + +static inline u32 dma_read(int reg, int lch) +{ + u8 stride; + u32 offset, val; + + stride = (reg >= dma_common_ch_start) ? dma_stride : 0; + offset = reg_map[reg] + (stride * lch); + + val = __raw_readw(dma_base + offset); + if ((reg > CLNK_CTRL && reg < CCEN) || + (reg > PCHD_ID && reg < CAPS_2)) { + u16 upper; + u32 offset2 = reg_map[reg] + 2 + (stride * lch); + upper = __raw_readw(dma_base + offset2); + val |= (upper << 16); + } + return val; +} + +static void omap1_clear_lch_regs(int lch) +{ + int i = dma_common_ch_start; + + for (; i <= dma_common_ch_end; i += 1) + dma_write(0, i, lch); +} + +static void omap1_clear_dma(int lch) +{ + u32 l; + + l = dma_read(CCR, lch); + l &= ~OMAP_DMA_CCR_EN; + dma_write(l, CCR, lch); + + /* Clear pending interrupts */ + l = dma_read(CSR, lch); +} + +static void omap1_show_dma_caps(void) +{ + if (enable_1510_mode) { + printk(KERN_INFO "DMA support for OMAP15xx initialized\n"); + } else { + u16 w; + printk(KERN_INFO "OMAP DMA hardware version %d\n", + dma_read(HW_ID, 0)); + printk(KERN_INFO "DMA capabilities: %08x:%08x:%04x:%04x:%04x\n", + dma_read(CAPS_0, 0), dma_read(CAPS_1, 0), + dma_read(CAPS_2, 0), dma_read(CAPS_3, 0), + dma_read(CAPS_4, 0)); + + /* Disable OMAP 3.0/3.1 compatibility mode. */ + w = dma_read(GSCR, 0); + w |= 1 << 3; + dma_write(w, GSCR, 0); + } + return; +} + +static u32 configure_dma_errata(void) +{ + + /* + * Erratum 3.2/3.3: sometimes 0 is returned if CSAC/CDAC is + * read before the DMA controller finished disabling the channel. + */ + if (!cpu_is_omap15xx()) + SET_DMA_ERRATA(DMA_ERRATA_3_3); + + return errata; +} + +static int __init omap1_system_dma_init(void) +{ + struct omap_system_dma_plat_info *p; + struct omap_dma_dev_attr *d; + struct platform_device *pdev; + int ret; + + pdev = platform_device_alloc("omap_dma_system", 0); + if (!pdev) { + pr_err("%s: Unable to device alloc for dma\n", + __func__); + return -ENOMEM; + } + + dma_base = ioremap(res[0].start, resource_size(&res[0])); + if (!dma_base) { + pr_err("%s: Unable to ioremap\n", __func__); + return -ENODEV; + } + + ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res)); + if (ret) { + dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n", + __func__, pdev->name, pdev->id); + goto exit_device_del; + } + + p = kzalloc(sizeof(struct omap_system_dma_plat_info), GFP_KERNEL); + if (!p) { + dev_err(&pdev->dev, "%s: Unable to allocate 'p' for %s\n", + __func__, pdev->name); + ret = -ENOMEM; + goto exit_device_put; + } + + d = kzalloc(sizeof(struct omap_dma_dev_attr), GFP_KERNEL); + if (!d) { + dev_err(&pdev->dev, "%s: Unable to allocate 'd' for %s\n", + __func__, pdev->name); + ret = -ENOMEM; + goto exit_release_p; + } + + d->lch_count = OMAP1_LOGICAL_DMA_CH_COUNT; + + /* Valid attributes for omap1 plus processors */ + if (cpu_is_omap15xx()) + d->dev_caps = ENABLE_1510_MODE; + enable_1510_mode = d->dev_caps & ENABLE_1510_MODE; + + d->dev_caps |= SRC_PORT; + d->dev_caps |= DST_PORT; + d->dev_caps |= SRC_INDEX; + d->dev_caps |= DST_INDEX; + d->dev_caps |= IS_BURST_ONLY4; + d->dev_caps |= CLEAR_CSR_ON_READ; + d->dev_caps |= IS_WORD_16; + + + d->chan = kzalloc(sizeof(struct omap_dma_lch) * + (d->lch_count), GFP_KERNEL); + if (!d->chan) { + dev_err(&pdev->dev, "%s: Memory allocation failed" + "for d->chan!!!\n", __func__); + goto exit_release_d; + } + + if (cpu_is_omap15xx()) + d->chan_count = 9; + else if (cpu_is_omap16xx() || cpu_is_omap7xx()) { + if (!(d->dev_caps & ENABLE_1510_MODE)) + d->chan_count = 16; + else + d->chan_count = 9; + } + + p->dma_attr = d; + + p->show_dma_caps = omap1_show_dma_caps; + p->clear_lch_regs = omap1_clear_lch_regs; + p->clear_dma = omap1_clear_dma; + p->dma_write = dma_write; + p->dma_read = dma_read; + p->disable_irq_lch = NULL; + + p->errata = configure_dma_errata(); + + ret = platform_device_add_data(pdev, p, sizeof(*p)); + if (ret) { + dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n", + __func__, pdev->name, pdev->id); + goto exit_release_chan; + } + + ret = platform_device_add(pdev); + if (ret) { + dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n", + __func__, pdev->name, pdev->id); + goto exit_release_chan; + } + + dma_stride = OMAP1_DMA_STRIDE; + dma_common_ch_start = CPC; + dma_common_ch_end = COLOR; + + return ret; + +exit_release_chan: + kfree(d->chan); +exit_release_d: + kfree(d); +exit_release_p: + kfree(p); +exit_device_put: + platform_device_put(pdev); +exit_device_del: + platform_device_del(pdev); + + return ret; +} +arch_initcall(omap1_system_dma_init); diff --git a/arch/arm/mach-omap1/flash.c b/arch/arm/mach-omap1/flash.c index 0b07a78..acd1616 100644 --- a/arch/arm/mach-omap1/flash.c +++ b/arch/arm/mach-omap1/flash.c @@ -11,6 +11,7 @@ #include <plat/io.h> #include <plat/tc.h> +#include <plat/flash.h> void omap1_set_vpp(struct map_info *map, int enable) { diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c index 5cfce16..8780e75 100644 --- a/arch/arm/mach-omap1/fpga.c +++ b/arch/arm/mach-omap1/fpga.c @@ -143,7 +143,7 @@ static struct irq_chip omap_fpga_irq = { */ void omap1510_fpga_init_irq(void) { - int i; + int i, res; __raw_writeb(0, OMAP1510_FPGA_IMR_LO); __raw_writeb(0, OMAP1510_FPGA_IMR_HI); @@ -177,10 +177,12 @@ void omap1510_fpga_init_irq(void) * NOTE: For general GPIO/MPUIO access and interrupts, please see * gpio.[ch] */ - gpio_request(13, "FPGA irq"); + res = gpio_request(13, "FPGA irq"); + if (res) { + pr_err("%s failed to get gpio\n", __func__); + return; + } gpio_direction_input(13); set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING); set_irq_chained_handler(OMAP1510_INT_FPGA, innovator_fpga_IRQ_demux); } - -EXPORT_SYMBOL(omap1510_fpga_init_irq); diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c new file mode 100644 index 0000000..04c4b04 --- /dev/null +++ b/arch/arm/mach-omap1/gpio15xx.c @@ -0,0 +1,99 @@ +/* + * OMAP15xx specific gpio init + * + * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ + * + * Author: + * Charulatha V <charu@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/gpio.h> + +#define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE +#define OMAP1510_GPIO_BASE 0xFFFCE000 + +/* gpio1 */ +static struct __initdata resource omap15xx_mpu_gpio_resources[] = { + { + .start = OMAP1_MPUIO_VBASE, + .end = OMAP1_MPUIO_VBASE + SZ_2K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_MPUIO, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = { + .virtual_irq_start = IH_MPUIO_BASE, + .bank_type = METHOD_MPUIO, + .bank_width = 16, + .bank_stride = 1, +}; + +static struct __initdata platform_device omap15xx_mpu_gpio = { + .name = "omap_gpio", + .id = 0, + .dev = { + .platform_data = &omap15xx_mpu_gpio_config, + }, + .num_resources = ARRAY_SIZE(omap15xx_mpu_gpio_resources), + .resource = omap15xx_mpu_gpio_resources, +}; + +/* gpio2 */ +static struct __initdata resource omap15xx_gpio_resources[] = { + { + .start = OMAP1510_GPIO_BASE, + .end = OMAP1510_GPIO_BASE + SZ_2K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_GPIO_BANK1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct __initdata omap_gpio_platform_data omap15xx_gpio_config = { + .virtual_irq_start = IH_GPIO_BASE, + .bank_type = METHOD_GPIO_1510, + .bank_width = 16, +}; + +static struct __initdata platform_device omap15xx_gpio = { + .name = "omap_gpio", + .id = 1, + .dev = { + .platform_data = &omap15xx_gpio_config, + }, + .num_resources = ARRAY_SIZE(omap15xx_gpio_resources), + .resource = omap15xx_gpio_resources, +}; + +/* + * omap15xx_gpio_init needs to be done before + * machine_init functions access gpio APIs. + * Hence omap15xx_gpio_init is a postcore_initcall. + */ +static int __init omap15xx_gpio_init(void) +{ + if (!cpu_is_omap15xx()) + return -EINVAL; + + platform_device_register(&omap15xx_mpu_gpio); + platform_device_register(&omap15xx_gpio); + + gpio_bank_count = 2; + return 0; +} +postcore_initcall(omap15xx_gpio_init); diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c new file mode 100644 index 0000000..5dd0d4c --- /dev/null +++ b/arch/arm/mach-omap1/gpio16xx.c @@ -0,0 +1,200 @@ +/* + * OMAP16xx specific gpio init + * + * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ + * + * Author: + * Charulatha V <charu@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/gpio.h> + +#define OMAP1610_GPIO1_BASE 0xfffbe400 +#define OMAP1610_GPIO2_BASE 0xfffbec00 +#define OMAP1610_GPIO3_BASE 0xfffbb400 +#define OMAP1610_GPIO4_BASE 0xfffbbc00 +#define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE + +/* mpu gpio */ +static struct __initdata resource omap16xx_mpu_gpio_resources[] = { + { + .start = OMAP1_MPUIO_VBASE, + .end = OMAP1_MPUIO_VBASE + SZ_2K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_MPUIO, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = { + .virtual_irq_start = IH_MPUIO_BASE, + .bank_type = METHOD_MPUIO, + .bank_width = 16, + .bank_stride = 1, +}; + +static struct __initdata platform_device omap16xx_mpu_gpio = { + .name = "omap_gpio", + .id = 0, + .dev = { + .platform_data = &omap16xx_mpu_gpio_config, + }, + .num_resources = ARRAY_SIZE(omap16xx_mpu_gpio_resources), + .resource = omap16xx_mpu_gpio_resources, +}; + +/* gpio1 */ +static struct __initdata resource omap16xx_gpio1_resources[] = { + { + .start = OMAP1610_GPIO1_BASE, + .end = OMAP1610_GPIO1_BASE + SZ_2K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_GPIO_BANK1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = { + .virtual_irq_start = IH_GPIO_BASE, + .bank_type = METHOD_GPIO_1610, + .bank_width = 16, +}; + +static struct __initdata platform_device omap16xx_gpio1 = { + .name = "omap_gpio", + .id = 1, + .dev = { + .platform_data = &omap16xx_gpio1_config, + }, + .num_resources = ARRAY_SIZE(omap16xx_gpio1_resources), + .resource = omap16xx_gpio1_resources, +}; + +/* gpio2 */ +static struct __initdata resource omap16xx_gpio2_resources[] = { + { + .start = OMAP1610_GPIO2_BASE, + .end = OMAP1610_GPIO2_BASE + SZ_2K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_1610_GPIO_BANK2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct __initdata omap_gpio_platform_data omap16xx_gpio2_config = { + .virtual_irq_start = IH_GPIO_BASE + 16, + .bank_type = METHOD_GPIO_1610, + .bank_width = 16, +}; + +static struct __initdata platform_device omap16xx_gpio2 = { + .name = "omap_gpio", + .id = 2, + .dev = { + .platform_data = &omap16xx_gpio2_config, + }, + .num_resources = ARRAY_SIZE(omap16xx_gpio2_resources), + .resource = omap16xx_gpio2_resources, +}; + +/* gpio3 */ +static struct __initdata resource omap16xx_gpio3_resources[] = { + { + .start = OMAP1610_GPIO3_BASE, + .end = OMAP1610_GPIO3_BASE + SZ_2K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_1610_GPIO_BANK3, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct __initdata omap_gpio_platform_data omap16xx_gpio3_config = { + .virtual_irq_start = IH_GPIO_BASE + 32, + .bank_type = METHOD_GPIO_1610, + .bank_width = 16, +}; + +static struct __initdata platform_device omap16xx_gpio3 = { + .name = "omap_gpio", + .id = 3, + .dev = { + .platform_data = &omap16xx_gpio3_config, + }, + .num_resources = ARRAY_SIZE(omap16xx_gpio3_resources), + .resource = omap16xx_gpio3_resources, +}; + +/* gpio4 */ +static struct __initdata resource omap16xx_gpio4_resources[] = { + { + .start = OMAP1610_GPIO4_BASE, + .end = OMAP1610_GPIO4_BASE + SZ_2K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_1610_GPIO_BANK4, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct __initdata omap_gpio_platform_data omap16xx_gpio4_config = { + .virtual_irq_start = IH_GPIO_BASE + 48, + .bank_type = METHOD_GPIO_1610, + .bank_width = 16, +}; + +static struct __initdata platform_device omap16xx_gpio4 = { + .name = "omap_gpio", + .id = 4, + .dev = { + .platform_data = &omap16xx_gpio4_config, + }, + .num_resources = ARRAY_SIZE(omap16xx_gpio4_resources), + .resource = omap16xx_gpio4_resources, +}; + +static struct __initdata platform_device * omap16xx_gpio_dev[] = { + &omap16xx_mpu_gpio, + &omap16xx_gpio1, + &omap16xx_gpio2, + &omap16xx_gpio3, + &omap16xx_gpio4, +}; + +/* + * omap16xx_gpio_init needs to be done before + * machine_init functions access gpio APIs. + * Hence omap16xx_gpio_init is a postcore_initcall. + */ +static int __init omap16xx_gpio_init(void) +{ + int i; + + if (!cpu_is_omap16xx()) + return -EINVAL; + + for (i = 0; i < ARRAY_SIZE(omap16xx_gpio_dev); i++) + platform_device_register(omap16xx_gpio_dev[i]); + + gpio_bank_count = ARRAY_SIZE(omap16xx_gpio_dev); + + return 0; +} +postcore_initcall(omap16xx_gpio_init); diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c new file mode 100644 index 0000000..1204c8b --- /dev/null +++ b/arch/arm/mach-omap1/gpio7xx.c @@ -0,0 +1,262 @@ +/* + * OMAP7xx specific gpio init + * + * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ + * + * Author: + * Charulatha V <charu@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/gpio.h> + +#define OMAP7XX_GPIO1_BASE 0xfffbc000 +#define OMAP7XX_GPIO2_BASE 0xfffbc800 +#define OMAP7XX_GPIO3_BASE 0xfffbd000 +#define OMAP7XX_GPIO4_BASE 0xfffbd800 +#define OMAP7XX_GPIO5_BASE 0xfffbe000 +#define OMAP7XX_GPIO6_BASE 0xfffbe800 +#define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE + +/* mpu gpio */ +static struct __initdata resource omap7xx_mpu_gpio_resources[] = { + { + .start = OMAP1_MPUIO_VBASE, + .end = OMAP1_MPUIO_VBASE + SZ_2K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_7XX_MPUIO, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = { + .virtual_irq_start = IH_MPUIO_BASE, + .bank_type = METHOD_MPUIO, + .bank_width = 32, + .bank_stride = 2, +}; + +static struct __initdata platform_device omap7xx_mpu_gpio = { + .name = "omap_gpio", + .id = 0, + .dev = { + .platform_data = &omap7xx_mpu_gpio_config, + }, + .num_resources = ARRAY_SIZE(omap7xx_mpu_gpio_resources), + .resource = omap7xx_mpu_gpio_resources, +}; + +/* gpio1 */ +static struct __initdata resource omap7xx_gpio1_resources[] = { + { + .start = OMAP7XX_GPIO1_BASE, + .end = OMAP7XX_GPIO1_BASE + SZ_2K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_7XX_GPIO_BANK1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct __initdata omap_gpio_platform_data omap7xx_gpio1_config = { + .virtual_irq_start = IH_GPIO_BASE, + .bank_type = METHOD_GPIO_7XX, + .bank_width = 32, +}; + +static struct __initdata platform_device omap7xx_gpio1 = { + .name = "omap_gpio", + .id = 1, + .dev = { + .platform_data = &omap7xx_gpio1_config, + }, + .num_resources = ARRAY_SIZE(omap7xx_gpio1_resources), + .resource = omap7xx_gpio1_resources, +}; + +/* gpio2 */ +static struct __initdata resource omap7xx_gpio2_resources[] = { + { + .start = OMAP7XX_GPIO2_BASE, + .end = OMAP7XX_GPIO2_BASE + SZ_2K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_7XX_GPIO_BANK2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct __initdata omap_gpio_platform_data omap7xx_gpio2_config = { + .virtual_irq_start = IH_GPIO_BASE + 32, + .bank_type = METHOD_GPIO_7XX, + .bank_width = 32, +}; + +static struct __initdata platform_device omap7xx_gpio2 = { + .name = "omap_gpio", + .id = 2, + .dev = { + .platform_data = &omap7xx_gpio2_config, + }, + .num_resources = ARRAY_SIZE(omap7xx_gpio2_resources), + .resource = omap7xx_gpio2_resources, +}; + +/* gpio3 */ +static struct __initdata resource omap7xx_gpio3_resources[] = { + { + .start = OMAP7XX_GPIO3_BASE, + .end = OMAP7XX_GPIO3_BASE + SZ_2K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_7XX_GPIO_BANK3, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct __initdata omap_gpio_platform_data omap7xx_gpio3_config = { + .virtual_irq_start = IH_GPIO_BASE + 64, + .bank_type = METHOD_GPIO_7XX, + .bank_width = 32, +}; + +static struct __initdata platform_device omap7xx_gpio3 = { + .name = "omap_gpio", + .id = 3, + .dev = { + .platform_data = &omap7xx_gpio3_config, + }, + .num_resources = ARRAY_SIZE(omap7xx_gpio3_resources), + .resource = omap7xx_gpio3_resources, +}; + +/* gpio4 */ +static struct __initdata resource omap7xx_gpio4_resources[] = { + { + .start = OMAP7XX_GPIO4_BASE, + .end = OMAP7XX_GPIO4_BASE + SZ_2K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_7XX_GPIO_BANK4, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct __initdata omap_gpio_platform_data omap7xx_gpio4_config = { + .virtual_irq_start = IH_GPIO_BASE + 96, + .bank_type = METHOD_GPIO_7XX, + .bank_width = 32, +}; + +static struct __initdata platform_device omap7xx_gpio4 = { + .name = "omap_gpio", + .id = 4, + .dev = { + .platform_data = &omap7xx_gpio4_config, + }, + .num_resources = ARRAY_SIZE(omap7xx_gpio4_resources), + .resource = omap7xx_gpio4_resources, +}; + +/* gpio5 */ +static struct __initdata resource omap7xx_gpio5_resources[] = { + { + .start = OMAP7XX_GPIO5_BASE, + .end = OMAP7XX_GPIO5_BASE + SZ_2K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_7XX_GPIO_BANK5, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct __initdata omap_gpio_platform_data omap7xx_gpio5_config = { + .virtual_irq_start = IH_GPIO_BASE + 128, + .bank_type = METHOD_GPIO_7XX, + .bank_width = 32, +}; + +static struct __initdata platform_device omap7xx_gpio5 = { + .name = "omap_gpio", + .id = 5, + .dev = { + .platform_data = &omap7xx_gpio5_config, + }, + .num_resources = ARRAY_SIZE(omap7xx_gpio5_resources), + .resource = omap7xx_gpio5_resources, +}; + +/* gpio6 */ +static struct __initdata resource omap7xx_gpio6_resources[] = { + { + .start = OMAP7XX_GPIO6_BASE, + .end = OMAP7XX_GPIO6_BASE + SZ_2K - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_7XX_GPIO_BANK6, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct __initdata omap_gpio_platform_data omap7xx_gpio6_config = { + .virtual_irq_start = IH_GPIO_BASE + 160, + .bank_type = METHOD_GPIO_7XX, + .bank_width = 32, +}; + +static struct __initdata platform_device omap7xx_gpio6 = { + .name = "omap_gpio", + .id = 6, + .dev = { + .platform_data = &omap7xx_gpio6_config, + }, + .num_resources = ARRAY_SIZE(omap7xx_gpio6_resources), + .resource = omap7xx_gpio6_resources, +}; + +static struct __initdata platform_device * omap7xx_gpio_dev[] = { + &omap7xx_mpu_gpio, + &omap7xx_gpio1, + &omap7xx_gpio2, + &omap7xx_gpio3, + &omap7xx_gpio4, + &omap7xx_gpio5, + &omap7xx_gpio6, +}; + +/* + * omap7xx_gpio_init needs to be done before + * machine_init functions access gpio APIs. + * Hence omap7xx_gpio_init is a postcore_initcall. + */ +static int __init omap7xx_gpio_init(void) +{ + int i; + + if (!cpu_is_omap7xx()) + return -EINVAL; + + for (i = 0; i < ARRAY_SIZE(omap7xx_gpio_dev); i++) + platform_device_register(omap7xx_gpio_dev[i]); + + gpio_bank_count = ARRAY_SIZE(omap7xx_gpio_dev); + + return 0; +} +postcore_initcall(omap7xx_gpio_init); diff --git a/arch/arm/mach-omap1/include/mach/entry-macro.S b/arch/arm/mach-omap1/include/mach/entry-macro.S index df9060e..c9be6d4 100644 --- a/arch/arm/mach-omap1/include/mach/entry-macro.S +++ b/arch/arm/mach-omap1/include/mach/entry-macro.S @@ -14,18 +14,17 @@ #include <mach/irqs.h> #include <asm/hardware/gic.h> -#if (defined(CONFIG_ARCH_OMAP730)||defined(CONFIG_ARCH_OMAP850)) && \ - (defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)) -#error "FIXME: OMAP7XX doesn't support multiple-OMAP" -#elif defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) -#define INT_IH2_IRQ INT_7XX_IH2_IRQ -#elif defined(CONFIG_ARCH_OMAP15XX) -#define INT_IH2_IRQ INT_1510_IH2_IRQ -#elif defined(CONFIG_ARCH_OMAP16XX) -#define INT_IH2_IRQ INT_1610_IH2_IRQ -#else -#warning "IH2 IRQ defaulted" -#define INT_IH2_IRQ INT_1510_IH2_IRQ +/* + * We use __glue to avoid errors with multiple definitions of + * .globl omap_irq_flags as it's included from entry-armv.S but not + * from entry-common.S. + */ +#ifdef __glue + .pushsection .data + .globl omap_irq_flags +omap_irq_flags: + .word 0 + .popsection #endif .macro disable_fiq @@ -47,9 +46,11 @@ beq 1510f ldr \irqnr, [\base, #IRQ_SIR_FIQ_REG_OFFSET] + ldr \tmp, =omap_irq_flags @ irq flags address + ldr \tmp, [\tmp, #0] @ irq flags value cmp \irqnr, #0 ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET] - cmpeq \irqnr, #INT_IH2_IRQ + cmpeq \irqnr, \tmp ldreq \base, =OMAP1_IO_ADDRESS(OMAP_IH2_BASE) ldreq \irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET] addeqs \irqnr, \irqnr, #32 diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 0ce3fec..870886a 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -142,3 +142,42 @@ void __init omap1_init_common_hw(void) omap1_mux_init(); } +/* + * NOTE: Please use ioremap + __raw_read/write where possible instead of these + */ + +u8 omap_readb(u32 pa) +{ + return __raw_readb(OMAP1_IO_ADDRESS(pa)); +} +EXPORT_SYMBOL(omap_readb); + +u16 omap_readw(u32 pa) +{ + return __raw_readw(OMAP1_IO_ADDRESS(pa)); +} +EXPORT_SYMBOL(omap_readw); + +u32 omap_readl(u32 pa) +{ + return __raw_readl(OMAP1_IO_ADDRESS(pa)); +} +EXPORT_SYMBOL(omap_readl); + +void omap_writeb(u8 v, u32 pa) +{ + __raw_writeb(v, OMAP1_IO_ADDRESS(pa)); +} +EXPORT_SYMBOL(omap_writeb); + +void omap_writew(u16 v, u32 pa) +{ + __raw_writew(v, OMAP1_IO_ADDRESS(pa)); +} +EXPORT_SYMBOL(omap_writew); + +void omap_writel(u32 v, u32 pa) +{ + __raw_writel(v, OMAP1_IO_ADDRESS(pa)); +} +EXPORT_SYMBOL(omap_writel); diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index db913c3..6bddbc8 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -176,26 +176,31 @@ static struct irq_chip omap_irq_chip = { void __init omap_init_irq(void) { + extern unsigned int omap_irq_flags; int i, j; #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) if (cpu_is_omap7xx()) { + omap_irq_flags = INT_7XX_IH2_IRQ; irq_banks = omap7xx_irq_banks; irq_bank_count = ARRAY_SIZE(omap7xx_irq_banks); } #endif #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { + omap_irq_flags = INT_1510_IH2_IRQ; irq_banks = omap1510_irq_banks; irq_bank_count = ARRAY_SIZE(omap1510_irq_banks); } if (cpu_is_omap310()) { + omap_irq_flags = INT_1510_IH2_IRQ; irq_banks = omap310_irq_banks; irq_bank_count = ARRAY_SIZE(omap310_irq_banks); } #endif #if defined(CONFIG_ARCH_OMAP16XX) if (cpu_is_omap16xx()) { + omap_irq_flags = INT_1510_IH2_IRQ; irq_banks = omap1610_irq_banks; irq_bank_count = ARRAY_SIZE(omap1610_irq_banks); } diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c index 3be11af..c9088d8 100644 --- a/arch/arm/mach-omap1/lcd_dma.c +++ b/arch/arm/mach-omap1/lcd_dma.c @@ -424,6 +424,9 @@ static int __init omap_init_lcd_dma(void) { int r; + if (!cpu_class_is_omap1()) + return -ENODEV; + if (cpu_is_omap16xx()) { u16 w; diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c index 277f356..22eb11d 100644 --- a/arch/arm/mach-omap1/leds.c +++ b/arch/arm/mach-omap1/leds.c @@ -17,6 +17,9 @@ static int __init omap_leds_init(void) { + if (!cpu_class_is_omap1()) + return -ENODEV; + if (machine_is_omap_innovator()) leds_event = innovator_leds_event; diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c index 1a85a42..c0e1f48 100644 --- a/arch/arm/mach-omap1/mailbox.c +++ b/arch/arm/mach-omap1/mailbox.c @@ -133,19 +133,18 @@ static struct omap_mbox1_priv omap1_mbox_dsp_priv = { }, }; -struct omap_mbox mbox_dsp_info = { +static struct omap_mbox mbox_dsp_info = { .name = "dsp", .ops = &omap1_mbox_ops, .priv = &omap1_mbox_dsp_priv, }; -struct omap_mbox *omap1_mboxes[] = { &mbox_dsp_info, NULL }; +static struct omap_mbox *omap1_mboxes[] = { &mbox_dsp_info, NULL }; static int __devinit omap1_mbox_probe(struct platform_device *pdev) { struct resource *mem; int ret; - int i; struct omap_mbox **list; list = omap1_mboxes; diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index b3a796a..8209736 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -174,8 +174,11 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = { #define OMAP16XX_MCBSP_REG_NUM 0 #endif -int __init omap1_mcbsp_init(void) +static int __init omap1_mcbsp_init(void) { + if (!cpu_class_is_omap1()) + return -ENODEV; + if (cpu_is_omap7xx()) { omap_mcbsp_count = OMAP7XX_MCBSP_PDATA_SZ; omap_mcbsp_cache_size = OMAP7XX_MCBSP_REG_NUM * sizeof(u16); diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c index 7835add..5fdef7a 100644 --- a/arch/arm/mach-omap1/mux.c +++ b/arch/arm/mach-omap1/mux.c @@ -343,7 +343,7 @@ MUX_CFG("Y14_1610_CCP_DATAM", 9, 21, 6, 2, 3, 1, 2, 0, 0) #define OMAP1XXX_PINS_SZ 0 #endif /* CONFIG_ARCH_OMAP15XX || CONFIG_ARCH_OMAP16XX */ -int __init_or_module omap1_cfg_reg(const struct pin_config *cfg) +static int __init_or_module omap1_cfg_reg(const struct pin_config *cfg) { static DEFINE_SPINLOCK(mux_spin_lock); unsigned long flags; diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index b1d3f9f..0cca23a 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -661,6 +661,9 @@ static int __init omap_pm_init(void) int error; #endif + if (!cpu_class_is_omap1()) + return -ENODEV; + printk("Power Management for TI OMAP.\n"); /* diff --git a/arch/arm/mach-omap1/pm_bus.c b/arch/arm/mach-omap1/pm_bus.c index 8b66392..6588c22 100644 --- a/arch/arm/mach-omap1/pm_bus.c +++ b/arch/arm/mach-omap1/pm_bus.c @@ -48,7 +48,6 @@ static int omap1_pm_runtime_suspend(struct device *dev) static int omap1_pm_runtime_resume(struct device *dev) { - int ret = 0; struct clk *iclk, *fclk; dev_dbg(dev, "%s\n", __func__); @@ -73,6 +72,9 @@ static int __init omap1_pm_runtime_init(void) const struct dev_pm_ops *pm; struct dev_pm_ops *omap_pm; + if (!cpu_class_is_omap1()) + return -ENODEV; + pm = platform_bus_get_pm_ops(); if (!pm) { pr_err("%s: unable to get dev_pm_ops from platform_bus\n", diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index b78d074..550ca9d 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -27,6 +27,8 @@ #include <mach/gpio.h> #include <plat/fpga.h> +#include "pm.h" + static struct clk * uart1_ck; static struct clk * uart2_ck; static struct clk * uart3_ck; @@ -52,9 +54,11 @@ static inline void omap_serial_outp(struct plat_serial8250_port *p, int offset, */ static void __init omap_serial_reset(struct plat_serial8250_port *p) { - omap_serial_outp(p, UART_OMAP_MDR1, 0x07); /* disable UART */ + omap_serial_outp(p, UART_OMAP_MDR1, + UART_OMAP_MDR1_DISABLE); /* disable UART */ omap_serial_outp(p, UART_OMAP_SCR, 0x08); /* TX watermark */ - omap_serial_outp(p, UART_OMAP_MDR1, 0x00); /* enable UART */ + omap_serial_outp(p, UART_OMAP_MDR1, + UART_OMAP_MDR1_16X_MODE); /* enable UART */ if (!cpu_is_omap15xx()) { omap_serial_outp(p, UART_OMAP_SYSC, 0x01); @@ -254,6 +258,9 @@ late_initcall(omap_serial_wakeup_init); static int __init omap_init(void) { + if (!cpu_class_is_omap1()) + return -ENODEV; + return platform_device_register(&serial_device); } arch_initcall(omap_init); diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c index abb34ff..ed7a61f 100644 --- a/arch/arm/mach-omap1/time.c +++ b/arch/arm/mach-omap1/time.c @@ -52,6 +52,7 @@ #include <asm/mach/irq.h> #include <asm/mach/time.h> +#include <plat/common.h> #define OMAP_MPU_TIMER_BASE OMAP_MPU_TIMER1_BASE #define OMAP_MPU_TIMER_OFFSET 0x100 |