diff options
author | Jarkko Nikula <jarkko.nikula@nokia.com> | 2008-12-10 17:35:30 -0800 |
---|---|---|
committer | Tony Lindgren <tony@atomide.com> | 2008-12-10 17:35:30 -0800 |
commit | f2d18fea8b87d09bdda22cc67c36f5f463452a33 (patch) | |
tree | a8641626136a6f14d2873e13f263fa0de6ab04f8 /arch/arm/mach-omap1 | |
parent | e031ab23deb5a5d9ac5744e69a0627823e81b074 (diff) | |
download | op-kernel-dev-f2d18fea8b87d09bdda22cc67c36f5f463452a33.zip op-kernel-dev-f2d18fea8b87d09bdda22cc67c36f5f463452a33.tar.gz |
ARM: OMAP: Switch to gpio_request/free calls
Switch to gpio_request/free calls
Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'arch/arm/mach-omap1')
-rw-r--r-- | arch/arm/mach-omap1/board-fsample.c | 5 | ||||
-rw-r--r-- | arch/arm/mach-omap1/board-h2.c | 15 | ||||
-rw-r--r-- | arch/arm/mach-omap1/board-h3.c | 7 | ||||
-rw-r--r-- | arch/arm/mach-omap1/board-innovator.c | 2 | ||||
-rw-r--r-- | arch/arm/mach-omap1/board-nokia770.c | 2 | ||||
-rw-r--r-- | arch/arm/mach-omap1/board-palmte.c | 4 | ||||
-rw-r--r-- | arch/arm/mach-omap1/board-palmz71.c | 4 | ||||
-rw-r--r-- | arch/arm/mach-omap1/board-perseus2.c | 5 | ||||
-rw-r--r-- | arch/arm/mach-omap1/board-voiceblue.c | 16 | ||||
-rw-r--r-- | arch/arm/mach-omap1/fpga.c | 2 | ||||
-rw-r--r-- | arch/arm/mach-omap1/leds.c | 4 | ||||
-rw-r--r-- | arch/arm/mach-omap1/serial.c | 4 |
12 files changed, 37 insertions, 33 deletions
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 68da313..3030829 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -223,8 +223,9 @@ static struct omap_board_config_kernel fsample_config[] = { static void __init omap_fsample_init(void) { - if (!(omap_request_gpio(P2_NAND_RB_GPIO_PIN))) - nand_data.dev_ready = nand_dev_ready; + if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0) + BUG(); + nand_data.dev_ready = nand_dev_ready; omap_cfg_reg(L3_1610_FLASH_CS2B_OE); omap_cfg_reg(M8_1610_FLASH_CS2B_WE); diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 7329ad5..c5b4a3b 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -339,7 +339,7 @@ static struct platform_device *h2_devices[] __initdata = { static void __init h2_init_smc91x(void) { - if ((omap_request_gpio(0)) < 0) { + if (gpio_request(0, "SMC91x irq") < 0) { printk("Error requesting gpio 0 for smc91x irq\n"); return; } @@ -425,8 +425,9 @@ static void __init h2_init(void) h2_nand_resource.end = h2_nand_resource.start = OMAP_CS2B_PHYS; h2_nand_resource.end += SZ_4K - 1; - if (!(omap_request_gpio(H2_NAND_RB_GPIO_PIN))) - h2_nand_data.dev_ready = h2_nand_dev_ready; + if (gpio_request(H2_NAND_RB_GPIO_PIN, "NAND ready") < 0) + BUG(); + gpio_direction_input(H2_NAND_RB_GPIO_PIN); omap_cfg_reg(L3_1610_FLASH_CS2B_OE); omap_cfg_reg(M8_1610_FLASH_CS2B_WE); @@ -438,10 +439,10 @@ static void __init h2_init(void) /* Irda */ #if defined(CONFIG_OMAP_IR) || defined(CONFIG_OMAP_IR_MODULE) omap_writel(omap_readl(FUNC_MUX_CTRL_A) | 7, FUNC_MUX_CTRL_A); - if (!(omap_request_gpio(H2_IRDA_FIRSEL_GPIO_PIN))) { - gpio_direction_output(H2_IRDA_FIRSEL_GPIO_PIN, 0); - h2_irda_data.transceiver_mode = h2_transceiver_mode; - } + if (gpio_request(H2_IRDA_FIRSEL_GPIO_PIN, "IRDA mode") < 0) + BUG(); + gpio_direction_output(H2_IRDA_FIRSEL_GPIO_PIN, 0); + h2_irda_data.transceiver_mode = h2_transceiver_mode; #endif platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices)); diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index c524f47..0332203 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -516,8 +516,9 @@ static void __init h3_init(void) nand_resource.end = nand_resource.start = OMAP_CS2B_PHYS; nand_resource.end += SZ_4K - 1; - if (!(omap_request_gpio(H3_NAND_RB_GPIO_PIN))) - nand_data.dev_ready = nand_dev_ready; + if (gpio_request(H3_NAND_RB_GPIO_PIN, "NAND ready") < 0) + BUG(); + nand_data.dev_ready = nand_dev_ready; /* GPIO10 Func_MUX_CTRL reg bit 29:27, Configure V2 to mode1 as GPIO */ /* GPIO10 pullup/down register, Enable pullup on GPIO10 */ @@ -537,7 +538,7 @@ static void __init h3_init(void) static void __init h3_init_smc91x(void) { omap_cfg_reg(W15_1710_GPIO40); - if (omap_request_gpio(40) < 0) { + if (gpio_request(40, "SMC91x irq") < 0) { printk("Error requesting gpio 40 for smc91x irq\n"); return; } diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index cbc11be..a21e365 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -301,7 +301,7 @@ static void __init innovator_init_smc91x(void) OMAP1510_FPGA_RST); udelay(750); } else { - if ((omap_request_gpio(0)) < 0) { + if (gpio_request(0, "SMC91x irq") < 0) { printk("Error requesting gpio 0 for smc91x irq\n"); return; } diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index e0576f5..b267824 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -124,7 +124,7 @@ static void mipid_dev_init(void) static void ads7846_dev_init(void) { - if (omap_request_gpio(ADS7846_PENDOWN_GPIO) < 0) + if (gpio_request(ADS7846_PENDOWN_GPIO, "ADS7846 pendown") < 0) printk(KERN_ERR "can't get ads7846 pen down GPIO\n"); } diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 0995a0f..4141e39 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -347,14 +347,14 @@ static void palmte_headphones_detect(void *data, int state) static void __init palmte_misc_gpio_setup(void) { /* Set TSC2102 PINTDAV pin as input (used by TSC2102 driver) */ - if (omap_request_gpio(PALMTE_PINTDAV_GPIO)) { + if (gpio_request(PALMTE_PINTDAV_GPIO, "TSC2102 PINTDAV") < 0) { printk(KERN_ERR "Could not reserve PINTDAV GPIO!\n"); return; } gpio_direction_input(PALMTE_PINTDAV_GPIO); /* Set USB-or-DC-IN pin as input (unused) */ - if (omap_request_gpio(PALMTE_USB_OR_DC_GPIO)) { + if (gpio_request(PALMTE_USB_OR_DC_GPIO, "USB/DC-IN") < 0) { printk(KERN_ERR "Could not reserve cable signal GPIO!\n"); return; } diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index 1b7d358..801fb5f 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -326,14 +326,14 @@ palmz71_gpio_setup(int early) gpio_direction_output(1, 1); } else { /* Set MMC/SD host WP pin as input */ - if (omap_request_gpio(PALMZ71_MMC_WP_GPIO)) { + if (gpio_request(PALMZ71_MMC_WP_GPIO, "MMC WP") < 0) { printk(KERN_ERR "Could not reserve WP GPIO!\n"); return; } gpio_direction_input(PALMZ71_MMC_WP_GPIO); /* Monitor the Power-cable-connected signal */ - if (omap_request_gpio(PALMZ71_USBDETECT_GPIO)) { + if (gpio_request(PALMZ71_USBDETECT_GPIO, "USB detect") < 0) { printk(KERN_ERR "Could not reserve cable signal GPIO!\n"); return; diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index b8f0077..3b9f907 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -223,8 +223,9 @@ static struct omap_board_config_kernel perseus2_config[] __initdata = { static void __init omap_perseus2_init(void) { - if (!(omap_request_gpio(P2_NAND_RB_GPIO_PIN))) - nand_data.dev_ready = nand_dev_ready; + if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0) + BUG(); + nand_data.dev_ready = nand_dev_ready; omap_cfg_reg(L3_1610_FLASH_CS2B_OE); omap_cfg_reg(M8_1610_FLASH_CS2B_WE); diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index bb4f4a8..92c9de1 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -168,23 +168,23 @@ static void __init voiceblue_init_irq(void) static void __init voiceblue_init(void) { /* Watchdog */ - omap_request_gpio(0); + gpio_request(0, "Watchdog"); /* smc91x reset */ - omap_request_gpio(7); + gpio_request(7, "SMC91x reset"); gpio_direction_output(7, 1); udelay(2); /* wait at least 100ns */ gpio_set_value(7, 0); mdelay(50); /* 50ms until PHY ready */ /* smc91x interrupt pin */ - omap_request_gpio(8); + gpio_request(8, "SMC91x irq"); /* 16C554 reset*/ - omap_request_gpio(6); + gpio_request(6, "16C554 reset"); gpio_direction_output(6, 0); /* 16C554 interrupt pins */ - omap_request_gpio(12); - omap_request_gpio(13); - omap_request_gpio(14); - omap_request_gpio(15); + gpio_request(12, "16C554 irq"); + gpio_request(13, "16C554 irq"); + gpio_request(14, "16C554 irq"); + gpio_request(15, "16C554 irq"); set_irq_type(gpio_to_irq(12), IRQ_TYPE_EDGE_RISING); set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING); set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING); diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c index 55748ec..4f2b8a7 100644 --- a/arch/arm/mach-omap1/fpga.c +++ b/arch/arm/mach-omap1/fpga.c @@ -177,7 +177,7 @@ void omap1510_fpga_init_irq(void) * NOTE: For general GPIO/MPUIO access and interrupts, please see * gpio.[ch] */ - omap_request_gpio(13); + gpio_request(13, "FPGA irq"); gpio_direction_input(13); set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING); set_irq_chained_handler(OMAP1510_INT_FPGA, innovator_fpga_IRQ_demux); diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c index 540434e..8cbf256 100644 --- a/arch/arm/mach-omap1/leds.c +++ b/arch/arm/mach-omap1/leds.c @@ -47,13 +47,13 @@ omap_leds_init(void) * that's a different kind of LED (just one color at a time). */ omap_cfg_reg(P18_1610_GPIO3); - if (omap_request_gpio(3) == 0) + if (gpio_request(3, "LED red") == 0) gpio_direction_output(3, 1); else printk(KERN_WARNING "LED: can't get GPIO3/red?\n"); omap_cfg_reg(MPUIO4); - if (omap_request_gpio(OMAP_MPUIO(4)) == 0) + if (gpio_request(OMAP_MPUIO(4), "LED green") == 0) gpio_direction_output(OMAP_MPUIO(4), 1); else printk(KERN_WARNING "LED: can't get MPUIO4/green?\n"); diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index b63da3f..0002084 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -244,7 +244,7 @@ static void __init omap_serial_set_port_wakeup(int gpio_nr) { int ret; - ret = omap_request_gpio(gpio_nr); + ret = gpio_request(gpio_nr, "UART wake"); if (ret < 0) { printk(KERN_ERR "Could not request UART wake GPIO: %i\n", gpio_nr); @@ -254,7 +254,7 @@ static void __init omap_serial_set_port_wakeup(int gpio_nr) ret = request_irq(gpio_to_irq(gpio_nr), &omap_serial_wake_interrupt, IRQF_TRIGGER_RISING, "serial wakeup", NULL); if (ret) { - omap_free_gpio(gpio_nr); + gpio_free(gpio_nr); printk(KERN_ERR "No interrupt for UART wake GPIO: %i\n", gpio_nr); return; |