summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap1
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2010-10-25 13:46:56 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2010-10-25 13:46:56 -0700
commit7b6181e06841f5ad15c4ff708b967b4db65a64de (patch)
treebdfcf5b74b692f76581156e452d268b64c795200 /arch/arm/mach-omap1
parent72e58063d63c5f0a7bf65312f1e3a5ed9bb5c2ff (diff)
parentbc487fb341af05120bccb9f59ce76302391dcc77 (diff)
downloadop-kernel-dev-7b6181e06841f5ad15c4ff708b967b4db65a64de.zip
op-kernel-dev-7b6181e06841f5ad15c4ff708b967b4db65a64de.tar.gz
Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6
* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (163 commits) omap: complete removal of machine_desc.io_pg_offst and .phys_io omap: UART: fix wakeup registers for OMAP24xx UART2 omap: Fix spotty MMC voltages ASoC: OMAP4: MCPDM: Remove unnecessary include of plat/control.h serial: omap-serial: fix signess error OMAP3: DMA: Errata i541: sDMA FIFO draining does not finish omap: dma: Fix buffering disable bit setting for omap24xx omap: serial: Fix the boot-up crash/reboot without CONFIG_PM OMAP3: PM: fix scratchpad memory accesses for off-mode omap4: pandaboard: enable the ehci port on pandaboard omap4: pandaboard: Fix the init if CONFIG_MMC_OMAP_HS is not set omap4: pandaboard: remove unused hsmmc definition OMAP: McBSP: Remove null omap44xx ops comment OMAP: McBSP: Swap CLKS source definition OMAP: McBSP: Fix CLKR and FSR signal muxing OMAP2+: clock: reduce the amount of standard debugging while disabling unused clocks OMAP: control: move plat-omap/control.h to mach-omap2/control.h OMAP: split plat-omap/common.c OMAP: McBSP: implement functional clock switching via clock framework OMAP: McBSP: implement McBSP CLKR and FSR signal muxing via mach-omap2/mcbsp.c ... Fixed up trivial conflicts in arch/arm/mach-omap2/ {board-zoom-peripherals.c,devices.c} as per Tony
Diffstat (limited to 'arch/arm/mach-omap1')
-rw-r--r--arch/arm/mach-omap1/Makefile2
-rw-r--r--arch/arm/mach-omap1/board-ams-delta.c69
-rw-r--r--arch/arm/mach-omap1/board-h2-mmc.c3
-rw-r--r--arch/arm/mach-omap1/board-h3-mmc.c3
-rw-r--r--arch/arm/mach-omap1/board-htcherald.c321
-rw-r--r--arch/arm/mach-omap1/board-sx1-mmc.c3
-rw-r--r--arch/arm/mach-omap1/devices.c70
-rw-r--r--arch/arm/mach-omap1/include/mach/camera.h11
-rw-r--r--arch/arm/mach-omap1/pm_bus.c98
9 files changed, 567 insertions, 13 deletions
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index facfaeb..9a304d8 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -12,7 +12,7 @@ obj-$(CONFIG_OMAP_MPU_TIMER) += time.o
obj-$(CONFIG_OMAP_32K_TIMER) += timer32k.o
# Power Management
-obj-$(CONFIG_PM) += pm.o sleep.o
+obj-$(CONFIG_PM) += pm.o sleep.o pm_bus.o
# DSP
obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 73c8639..1d4163b 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -16,9 +16,12 @@
#include <linux/init.h>
#include <linux/input.h>
#include <linux/interrupt.h>
+#include <linux/leds.h>
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
+#include <media/soc_camera.h>
+
#include <asm/serial.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -32,6 +35,7 @@
#include <plat/usb.h>
#include <plat/board.h>
#include <plat/common.h>
+#include <mach/camera.h>
#include <mach/ams-delta-fiq.h>
@@ -213,10 +217,56 @@ static struct platform_device ams_delta_led_device = {
.id = -1
};
+static struct i2c_board_info ams_delta_camera_board_info[] = {
+ {
+ I2C_BOARD_INFO("ov6650", 0x60),
+ },
+};
+
+#ifdef CONFIG_LEDS_TRIGGERS
+DEFINE_LED_TRIGGER(ams_delta_camera_led_trigger);
+
+static int ams_delta_camera_power(struct device *dev, int power)
+{
+ /*
+ * turn on camera LED
+ */
+ if (power)
+ led_trigger_event(ams_delta_camera_led_trigger, LED_FULL);
+ else
+ led_trigger_event(ams_delta_camera_led_trigger, LED_OFF);
+ return 0;
+}
+#else
+#define ams_delta_camera_power NULL
+#endif
+
+static struct soc_camera_link __initdata ams_delta_iclink = {
+ .bus_id = 0, /* OMAP1 SoC camera bus */
+ .i2c_adapter_id = 1,
+ .board_info = &ams_delta_camera_board_info[0],
+ .module_name = "ov6650",
+ .power = ams_delta_camera_power,
+};
+
+static struct platform_device ams_delta_camera_device = {
+ .name = "soc-camera-pdrv",
+ .id = 0,
+ .dev = {
+ .platform_data = &ams_delta_iclink,
+ },
+};
+
+static struct omap1_cam_platform_data ams_delta_camera_platform_data = {
+ .camexclk_khz = 12000, /* default 12MHz clock, no extra DPLL */
+ .lclk_khz_max = 1334, /* results in 5fps CIF, 10fps QCIF */
+};
+
static struct platform_device *ams_delta_devices[] __initdata = {
&ams_delta_kp_device,
&ams_delta_lcd_device,
&ams_delta_led_device,
+ &ams_delta_camera_device,
};
static void __init ams_delta_init(void)
@@ -225,6 +275,20 @@ static void __init ams_delta_init(void)
omap_cfg_reg(UART1_TX);
omap_cfg_reg(UART1_RTS);
+ /* parallel camera interface */
+ omap_cfg_reg(H19_1610_CAM_EXCLK);
+ omap_cfg_reg(J15_1610_CAM_LCLK);
+ omap_cfg_reg(L18_1610_CAM_VS);
+ omap_cfg_reg(L15_1610_CAM_HS);
+ omap_cfg_reg(L19_1610_CAM_D0);
+ omap_cfg_reg(K14_1610_CAM_D1);
+ omap_cfg_reg(K15_1610_CAM_D2);
+ omap_cfg_reg(K19_1610_CAM_D3);
+ omap_cfg_reg(K18_1610_CAM_D4);
+ omap_cfg_reg(J14_1610_CAM_D5);
+ omap_cfg_reg(J19_1610_CAM_D6);
+ omap_cfg_reg(J18_1610_CAM_D7);
+
iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
omap_board_config = ams_delta_config;
@@ -236,6 +300,11 @@ static void __init ams_delta_init(void)
ams_delta_latch2_write(~0, 0);
omap1_usb_init(&ams_delta_usb_config);
+ omap1_set_camera_info(&ams_delta_camera_platform_data);
+#ifdef CONFIG_LEDS_TRIGGERS
+ led_trigger_register_simple("ams_delta_camera",
+ &ams_delta_camera_led_trigger);
+#endif
platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
#ifdef CONFIG_AMS_DELTA_FIQ
diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c
index b30c499..f2fc43d 100644
--- a/arch/arm/mach-omap1/board-h2-mmc.c
+++ b/arch/arm/mach-omap1/board-h2-mmc.c
@@ -58,8 +58,7 @@ static struct omap_mmc_platform_data mmc1_data = {
.dma_mask = 0xffffffff,
.slots[0] = {
.set_power = mmc_set_power,
- .ocr_mask = MMC_VDD_28_29 | MMC_VDD_30_31 |
- MMC_VDD_32_33 | MMC_VDD_33_34,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.name = "mmcblk",
},
};
diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c
index 54b0f06..2098525 100644
--- a/arch/arm/mach-omap1/board-h3-mmc.c
+++ b/arch/arm/mach-omap1/board-h3-mmc.c
@@ -40,8 +40,7 @@ static struct omap_mmc_platform_data mmc1_data = {
.dma_mask = 0xffffffff,
.slots[0] = {
.set_power = mmc_set_power,
- .ocr_mask = MMC_VDD_28_29 | MMC_VDD_30_31 |
- MMC_VDD_32_33 | MMC_VDD_33_34,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.name = "mmcblk",
},
};
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 86afb29..071af3e 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -30,6 +30,13 @@
#include <linux/input.h>
#include <linux/io.h>
#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/htcpld.h>
+#include <linux/leds.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -39,6 +46,7 @@
#include <plat/board.h>
#include <plat/keypad.h>
#include <plat/usb.h>
+#include <plat/mmc.h>
#include <mach/irqs.h>
@@ -52,13 +60,123 @@
#define OMAP_LCDC_CTRL_LCD_EN (1 << 0)
#define OMAP_LCDC_STAT_DONE (1 << 0)
-static struct omap_lcd_config htcherald_lcd_config __initdata = {
- .ctrl_name = "internal",
-};
+/* GPIO definitions for the power button and keyboard slide switch */
+#define HTCHERALD_GPIO_POWER 139
+#define HTCHERALD_GPIO_SLIDE 174
+#define HTCHERALD_GIRQ_BTNS 141
-static struct omap_board_config_kernel htcherald_config[] __initdata = {
- { OMAP_TAG_LCD, &htcherald_lcd_config },
-};
+/* GPIO definitions for the touchscreen */
+#define HTCHERALD_GPIO_TS 76
+
+/* HTCPLD definitions */
+
+/*
+ * CPLD Logic
+ *
+ * Chip 3 - 0x03
+ *
+ * Function 7 6 5 4 3 2 1 0
+ * ------------------------------------
+ * DPAD light x x x x x x x 1
+ * SoundDev x x x x 1 x x x
+ * Screen white 1 x x x x x x x
+ * MMC power on x x x x x 1 x x
+ * Happy times (n) 0 x x x x 1 x x
+ *
+ * Chip 4 - 0x04
+ *
+ * Function 7 6 5 4 3 2 1 0
+ * ------------------------------------
+ * Keyboard light x x x x x x x 1
+ * LCD Bright (4) x x x x x 1 1 x
+ * LCD Bright (3) x x x x x 0 1 x
+ * LCD Bright (2) x x x x x 1 0 x
+ * LCD Bright (1) x x x x x 0 0 x
+ * LCD Off x x x x 0 x x x
+ * LCD image (fb) 1 x x x x x x x
+ * LCD image (white) 0 x x x x x x x
+ * Caps lock LED x x 1 x x x x x
+ *
+ * Chip 5 - 0x05
+ *
+ * Function 7 6 5 4 3 2 1 0
+ * ------------------------------------
+ * Red (solid) x x x x x 1 x x
+ * Red (flash) x x x x x x 1 x
+ * Green (GSM flash) x x x x 1 x x x
+ * Green (GSM solid) x x x 1 x x x x
+ * Green (wifi flash) x x 1 x x x x x
+ * Blue (bt flash) x 1 x x x x x x
+ * DPAD Int Enable 1 x x x x x x 0
+ *
+ * (Combinations of the above can be made for different colors.)
+ * The direction pad interrupt enable must be set each time the
+ * interrupt is handled.
+ *
+ * Chip 6 - 0x06
+ *
+ * Function 7 6 5 4 3 2 1 0
+ * ------------------------------------
+ * Vibrator x x x x 1 x x x
+ * Alt LED x x x 1 x x x x
+ * Screen white 1 x x x x x x x
+ * Screen white x x 1 x x x x x
+ * Screen white x 0 x x x x x x
+ * Enable kbd dpad x x x x x x 0 x
+ * Happy Times 0 1 0 x x x 0 x
+ */
+
+/*
+ * HTCPLD GPIO lines start 16 after OMAP_MAX_GPIO_LINES to account
+ * for the 16 MPUIO lines.
+ */
+#define HTCPLD_GPIO_START_OFFSET (OMAP_MAX_GPIO_LINES + 16)
+#define HTCPLD_IRQ(chip, offset) (OMAP_IRQ_END + 8 * (chip) + (offset))
+#define HTCPLD_BASE(chip, offset) \
+ (HTCPLD_GPIO_START_OFFSET + 8 * (chip) + (offset))
+
+#define HTCPLD_GPIO_LED_DPAD HTCPLD_BASE(0, 0)
+#define HTCPLD_GPIO_LED_KBD HTCPLD_BASE(1, 0)
+#define HTCPLD_GPIO_LED_CAPS HTCPLD_BASE(1, 5)
+#define HTCPLD_GPIO_LED_RED_FLASH HTCPLD_BASE(2, 1)
+#define HTCPLD_GPIO_LED_RED_SOLID HTCPLD_BASE(2, 2)
+#define HTCPLD_GPIO_LED_GREEN_FLASH HTCPLD_BASE(2, 3)
+#define HTCPLD_GPIO_LED_GREEN_SOLID HTCPLD_BASE(2, 4)
+#define HTCPLD_GPIO_LED_WIFI HTCPLD_BASE(2, 5)
+#define HTCPLD_GPIO_LED_BT HTCPLD_BASE(2, 6)
+#define HTCPLD_GPIO_LED_VIBRATE HTCPLD_BASE(3, 3)
+#define HTCPLD_GPIO_LED_ALT HTCPLD_BASE(3, 4)
+
+#define HTCPLD_GPIO_RIGHT_KBD HTCPLD_BASE(6, 7)
+#define HTCPLD_GPIO_UP_KBD HTCPLD_BASE(6, 6)
+#define HTCPLD_GPIO_LEFT_KBD HTCPLD_BASE(6, 5)
+#define HTCPLD_GPIO_DOWN_KBD HTCPLD_BASE(6, 4)
+
+#define HTCPLD_GPIO_RIGHT_DPAD HTCPLD_BASE(7, 7)
+#define HTCPLD_GPIO_UP_DPAD HTCPLD_BASE(7, 6)
+#define HTCPLD_GPIO_LEFT_DPAD HTCPLD_BASE(7, 5)
+#define HTCPLD_GPIO_DOWN_DPAD HTCPLD_BASE(7, 4)
+#define HTCPLD_GPIO_ENTER_DPAD HTCPLD_BASE(7, 3)
+
+/*
+ * The htcpld chip requires a gpio write to a specific line
+ * to re-enable interrupts after one has occurred.
+ */
+#define HTCPLD_GPIO_INT_RESET_HI HTCPLD_BASE(2, 7)
+#define HTCPLD_GPIO_INT_RESET_LO HTCPLD_BASE(2, 0)
+
+/* Chip 5 */
+#define HTCPLD_IRQ_RIGHT_KBD HTCPLD_IRQ(0, 7)
+#define HTCPLD_IRQ_UP_KBD HTCPLD_IRQ(0, 6)
+#define HTCPLD_IRQ_LEFT_KBD HTCPLD_IRQ(0, 5)
+#define HTCPLD_IRQ_DOWN_KBD HTCPLD_IRQ(0, 4)
+
+/* Chip 6 */
+#define HTCPLD_IRQ_RIGHT_DPAD HTCPLD_IRQ(1, 7)
+#define HTCPLD_IRQ_UP_DPAD HTCPLD_IRQ(1, 6)
+#define HTCPLD_IRQ_LEFT_DPAD HTCPLD_IRQ(1, 5)
+#define HTCPLD_IRQ_DOWN_DPAD HTCPLD_IRQ(1, 4)
+#define HTCPLD_IRQ_ENTER_DPAD HTCPLD_IRQ(1, 3)
/* Keyboard definition */
@@ -140,6 +258,129 @@ static struct platform_device kp_device = {
.resource = kp_resources,
};
+/* GPIO buttons for keyboard slide and power button */
+static struct gpio_keys_button herald_gpio_keys_table[] = {
+ {BTN_0, HTCHERALD_GPIO_POWER, 1, "POWER", EV_KEY, 1, 20},
+ {SW_LID, HTCHERALD_GPIO_SLIDE, 0, "SLIDE", EV_SW, 1, 20},
+
+ {KEY_LEFT, HTCPLD_GPIO_LEFT_KBD, 1, "LEFT", EV_KEY, 1, 20},
+ {KEY_RIGHT, HTCPLD_GPIO_RIGHT_KBD, 1, "RIGHT", EV_KEY, 1, 20},
+ {KEY_UP, HTCPLD_GPIO_UP_KBD, 1, "UP", EV_KEY, 1, 20},
+ {KEY_DOWN, HTCPLD_GPIO_DOWN_KBD, 1, "DOWN", EV_KEY, 1, 20},
+
+ {KEY_LEFT, HTCPLD_GPIO_LEFT_DPAD, 1, "DLEFT", EV_KEY, 1, 20},
+ {KEY_RIGHT, HTCPLD_GPIO_RIGHT_DPAD, 1, "DRIGHT", EV_KEY, 1, 20},
+ {KEY_UP, HTCPLD_GPIO_UP_DPAD, 1, "DUP", EV_KEY, 1, 20},
+ {KEY_DOWN, HTCPLD_GPIO_DOWN_DPAD, 1, "DDOWN", EV_KEY, 1, 20},
+ {KEY_ENTER, HTCPLD_GPIO_ENTER_DPAD, 1, "DENTER", EV_KEY, 1, 20},
+};
+
+static struct gpio_keys_platform_data herald_gpio_keys_data = {
+ .buttons = herald_gpio_keys_table,
+ .nbuttons = ARRAY_SIZE(herald_gpio_keys_table),
+ .rep = 1,
+};
+
+static struct platform_device herald_gpiokeys_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &herald_gpio_keys_data,
+ },
+};
+
+/* LEDs for the Herald. These connect to the HTCPLD GPIO device. */
+static struct gpio_led gpio_leds[] = {
+ {"dpad", NULL, HTCPLD_GPIO_LED_DPAD, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
+ {"kbd", NULL, HTCPLD_GPIO_LED_KBD, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
+ {"vibrate", NULL, HTCPLD_GPIO_LED_VIBRATE, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
+ {"green_solid", NULL, HTCPLD_GPIO_LED_GREEN_SOLID, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
+ {"green_flash", NULL, HTCPLD_GPIO_LED_GREEN_FLASH, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
+ {"red_solid", "mmc0", HTCPLD_GPIO_LED_RED_SOLID, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
+ {"red_flash", NULL, HTCPLD_GPIO_LED_RED_FLASH, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
+ {"wifi", NULL, HTCPLD_GPIO_LED_WIFI, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
+ {"bt", NULL, HTCPLD_GPIO_LED_BT, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
+ {"caps", NULL, HTCPLD_GPIO_LED_CAPS, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
+ {"alt", NULL, HTCPLD_GPIO_LED_ALT, 0, 0, LEDS_GPIO_DEFSTATE_OFF},
+};
+
+static struct gpio_led_platform_data gpio_leds_data = {
+ .leds = gpio_leds,
+ .num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device gpio_leds_device = {
+ .name = "leds-gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &gpio_leds_data,
+ },
+};
+
+/* HTC PLD chips */
+
+static struct resource htcpld_resources[] = {
+ [0] = {
+ .start = OMAP_GPIO_IRQ(HTCHERALD_GIRQ_BTNS),
+ .end = OMAP_GPIO_IRQ(HTCHERALD_GIRQ_BTNS),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct htcpld_chip_platform_data htcpld_chips[] = {
+ [0] = {
+ .addr = 0x03,
+ .reset = 0x04,
+ .num_gpios = 8,
+ .gpio_out_base = HTCPLD_BASE(0, 0),
+ .gpio_in_base = HTCPLD_BASE(4, 0),
+ },
+ [1] = {
+ .addr = 0x04,
+ .reset = 0x8e,
+ .num_gpios = 8,
+ .gpio_out_base = HTCPLD_BASE(1, 0),
+ .gpio_in_base = HTCPLD_BASE(5, 0),
+ },
+ [2] = {
+ .addr = 0x05,
+ .reset = 0x80,
+ .num_gpios = 8,
+ .gpio_out_base = HTCPLD_BASE(2, 0),
+ .gpio_in_base = HTCPLD_BASE(6, 0),
+ .irq_base = HTCPLD_IRQ(0, 0),
+ .num_irqs = 8,
+ },
+ [3] = {
+ .addr = 0x06,
+ .reset = 0x40,
+ .num_gpios = 8,
+ .gpio_out_base = HTCPLD_BASE(3, 0),
+ .gpio_in_base = HTCPLD_BASE(7, 0),
+ .irq_base = HTCPLD_IRQ(1, 0),
+ .num_irqs = 8,
+ },
+};
+
+struct htcpld_core_platform_data htcpld_pfdata = {
+ .int_reset_gpio_hi = HTCPLD_GPIO_INT_RESET_HI,
+ .int_reset_gpio_lo = HTCPLD_GPIO_INT_RESET_LO,
+ .i2c_adapter_id = 1,
+
+ .chip = htcpld_chips,
+ .num_chip = ARRAY_SIZE(htcpld_chips),
+};
+
+static struct platform_device htcpld_device = {
+ .name = "i2c-htcpld",
+ .id = -1,
+ .resource = htcpld_resources,
+ .num_resources = ARRAY_SIZE(htcpld_resources),
+ .dev = {
+ .platform_data = &htcpld_pfdata,
+ },
+};
+
/* USB Device */
static struct omap_usb_config htcherald_usb_config __initdata = {
.otg = 0,
@@ -150,14 +391,71 @@ static struct omap_usb_config htcherald_usb_config __initdata = {
};
/* LCD Device resources */
+static struct omap_lcd_config htcherald_lcd_config __initdata = {
+ .ctrl_name = "internal",
+};
+
+static struct omap_board_config_kernel htcherald_config[] __initdata = {
+ { OMAP_TAG_LCD, &htcherald_lcd_config },
+};
+
static struct platform_device lcd_device = {
.name = "lcd_htcherald",
.id = -1,
};
+/* MMC Card */
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+static struct omap_mmc_platform_data htc_mmc1_data = {
+ .nr_slots = 1,
+ .switch_slot = NULL,
+ .slots[0] = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .name = "mmcblk",
+ .nomux = 1,
+ .wires = 4,
+ .switch_pin = -1,
+ },
+};
+
+static struct omap_mmc_platform_data *htc_mmc_data[1];
+#endif
+
+
+/* Platform devices for the Herald */
static struct platform_device *devices[] __initdata = {
&kp_device,
&lcd_device,
+ &htcpld_device,
+ &gpio_leds_device,
+ &herald_gpiokeys_device,
+};
+
+/*
+ * Touchscreen
+ */
+static const struct ads7846_platform_data htcherald_ts_platform_data = {
+ .model = 7846,
+ .keep_vref_on = 1,
+ .x_plate_ohms = 496,
+ .gpio_pendown = HTCHERALD_GPIO_TS,
+ .pressure_max = 100000,
+ .pressure_min = 5000,
+ .x_min = 528,
+ .x_max = 3760,
+ .y_min = 624,
+ .y_max = 3760,
+};
+
+static struct spi_board_info __initdata htcherald_spi_board_info[] = {
+ {
+ .modalias = "ads7846",
+ .platform_data = &htcherald_ts_platform_data,
+ .irq = OMAP_GPIO_IRQ(HTCHERALD_GPIO_TS),
+ .max_speed_hz = 2500000,
+ .bus_num = 2,
+ .chip_select = 1,
+ }
};
/*
@@ -278,6 +576,7 @@ static void __init htcherald_init(void)
{
printk(KERN_INFO "HTC Herald init.\n");
+ /* Do board initialization before we register all the devices */
omap_gpio_init();
omap_board_config = htcherald_config;
@@ -288,6 +587,16 @@ static void __init htcherald_init(void)
htcherald_usb_enable();
omap1_usb_init(&htcherald_usb_config);
+
+ spi_register_board_info(htcherald_spi_board_info,
+ ARRAY_SIZE(htcherald_spi_board_info));
+
+ omap_register_i2c_bus(1, 100, NULL, 0);
+
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+ htc_mmc_data[0] = &htc_mmc1_data;
+ omap1_init_mmc(htc_mmc_data, 1);
+#endif
}
static void __init htcherald_init_irq(void)
diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c
index 5b33ae8..e8ddd86 100644
--- a/arch/arm/mach-omap1/board-sx1-mmc.c
+++ b/arch/arm/mach-omap1/board-sx1-mmc.c
@@ -44,8 +44,7 @@ static struct omap_mmc_platform_data mmc1_data = {
.nr_slots = 1,
.slots[0] = {
.set_power = mmc_set_power,
- .ocr_mask = MMC_VDD_28_29 | MMC_VDD_30_31 |
- MMC_VDD_32_33 | MMC_VDD_33_34,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.name = "mmcblk",
},
};
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index b583121..ea0d80a 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -9,6 +9,7 @@
* (at your option) any later version.
*/
+#include <linux/dma-mapping.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -192,6 +193,48 @@ static inline void omap_init_spi100k(void)
}
#endif
+
+#define OMAP1_CAMERA_BASE 0xfffb6800
+#define OMAP1_CAMERA_IOSIZE 0x1c
+
+static struct resource omap1_camera_resources[] = {
+ [0] = {
+ .start = OMAP1_CAMERA_BASE,
+ .end = OMAP1_CAMERA_BASE + OMAP1_CAMERA_IOSIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = INT_CAMERA,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 omap1_camera_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device omap1_camera_device = {
+ .name = "omap1-camera",
+ .id = 0, /* This is used to put cameras on this interface */
+ .dev = {
+ .dma_mask = &omap1_camera_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = ARRAY_SIZE(omap1_camera_resources),
+ .resource = omap1_camera_resources,
+};
+
+void __init omap1_camera_init(void *info)
+{
+ struct platform_device *dev = &omap1_camera_device;
+ int ret;
+
+ dev->dev.platform_data = info;
+
+ ret = platform_device_register(dev);
+ if (ret)
+ dev_err(&dev->dev, "unable to register device: %d\n", ret);
+}
+
+
/*-------------------------------------------------------------------------*/
static inline void omap_init_sti(void) {}
@@ -258,3 +301,30 @@ static int __init omap1_init_devices(void)
}
arch_initcall(omap1_init_devices);
+#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE)
+
+static struct resource wdt_resources[] = {
+ {
+ .start = 0xfffeb000,
+ .end = 0xfffeb07F,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device omap_wdt_device = {
+ .name = "omap_wdt",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(wdt_resources),
+ .resource = wdt_resources,
+};
+
+static int __init omap_init_wdt(void)
+{
+ if (!cpu_is_omap16xx())
+ return;
+
+ platform_device_register(&omap_wdt_device);
+ return 0;
+}
+subsys_initcall(omap_init_wdt);
+#endif
diff --git a/arch/arm/mach-omap1/include/mach/camera.h b/arch/arm/mach-omap1/include/mach/camera.h
new file mode 100644
index 0000000..fd54b45
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/camera.h
@@ -0,0 +1,11 @@
+#ifndef __ASM_ARCH_CAMERA_H_
+#define __ASM_ARCH_CAMERA_H_
+
+void omap1_camera_init(void *);
+
+static inline void omap1_set_camera_info(struct omap1_cam_platform_data *info)
+{
+ omap1_camera_init(info);
+}
+
+#endif /* __ASM_ARCH_CAMERA_H_ */
diff --git a/arch/arm/mach-omap1/pm_bus.c b/arch/arm/mach-omap1/pm_bus.c
new file mode 100644
index 0000000..8b66392
--- /dev/null
+++ b/arch/arm/mach-omap1/pm_bus.c
@@ -0,0 +1,98 @@
+/*
+ * Runtime PM support code for OMAP1
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/pm_runtime.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <plat/omap_device.h>
+#include <plat/omap-pm.h>
+
+#ifdef CONFIG_PM_RUNTIME
+static int omap1_pm_runtime_suspend(struct device *dev)
+{
+ struct clk *iclk, *fclk;
+ int ret = 0;
+
+ dev_dbg(dev, "%s\n", __func__);
+
+ ret = pm_generic_runtime_suspend(dev);
+
+ fclk = clk_get(dev, "fck");
+ if (!IS_ERR(fclk)) {
+ clk_disable(fclk);
+ clk_put(fclk);
+ }
+
+ iclk = clk_get(dev, "ick");
+ if (!IS_ERR(iclk)) {
+ clk_disable(iclk);
+ clk_put(iclk);
+ }
+
+ return 0;
+};
+
+static int omap1_pm_runtime_resume(struct device *dev)
+{
+ int ret = 0;
+ struct clk *iclk, *fclk;
+
+ dev_dbg(dev, "%s\n", __func__);
+
+ iclk = clk_get(dev, "ick");
+ if (!IS_ERR(iclk)) {
+ clk_enable(iclk);
+ clk_put(iclk);
+ }
+
+ fclk = clk_get(dev, "fck");
+ if (!IS_ERR(fclk)) {
+ clk_enable(fclk);
+ clk_put(fclk);
+ }
+
+ return pm_generic_runtime_resume(dev);
+};
+
+static int __init omap1_pm_runtime_init(void)
+{
+ const struct dev_pm_ops *pm;
+ struct dev_pm_ops *omap_pm;
+
+ pm = platform_bus_get_pm_ops();
+ if (!pm) {
+ pr_err("%s: unable to get dev_pm_ops from platform_bus\n",
+ __func__);
+ return -ENODEV;
+ }
+
+ omap_pm = kmemdup(pm, sizeof(struct dev_pm_ops), GFP_KERNEL);
+ if (!omap_pm) {
+ pr_err("%s: unable to alloc memory for new dev_pm_ops\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ omap_pm->runtime_suspend = omap1_pm_runtime_suspend;
+ omap_pm->runtime_resume = omap1_pm_runtime_resume;
+
+ platform_bus_set_pm_ops(omap_pm);
+
+ return 0;
+}
+core_initcall(omap1_pm_runtime_init);
+#endif /* CONFIG_PM_RUNTIME */
OpenPOWER on IntegriCloud