Initial blind fixup for arm for irq changes

Untested, but this should fix up the bulk of the totally mechanical
issues, and should make the actual detail fixing easier.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

5 files changed, 8 insertions, 13 deletions

diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 6b05647..3a62280 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -327,7 +327,7 @@ static struct spi_board_info __initdata mistral_boardinfo[] = { {
 
 #ifdef	CONFIG_PM
 static irqreturn_t
-osk_mistral_wake_interrupt(int irq, void *ignored, struct pt_regs *regs)
+osk_mistral_wake_interrupt(int irq, void *ignored)
 {
 	return IRQ_HANDLED;
 }
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index efe9bfc..8e40208 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -84,8 +84,7 @@ static void fpga_mask_ack_irq(unsigned int irq)
 	fpga_ack_irq(irq);
 }
 
-void innovator_fpga_IRQ_demux(unsigned int irq, struct irqdesc *desc,
-			      struct pt_regs *regs)
+void innovator_fpga_IRQ_demux(unsigned int irq, struct irqdesc *desc)
 {
 	struct irqdesc *d;
 	u32 stat;
@@ -101,7 +100,7 @@ void innovator_fpga_IRQ_demux(unsigned int irq, struct irqdesc *desc,
 	     fpga_irq++, stat >>= 1) {
 		if (stat & 1) {
 			d = irq_desc + fpga_irq;
-			desc_handle_irq(fpga_irq, d, regs);
+			desc_handle_irq(fpga_irq, d);
 		}
 	}
 }
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index cd76185..4834758 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -682,8 +682,7 @@ static int omap_pm_finish(suspend_state_t state)
 }
 
 
-static irqreturn_t  omap_wakeup_interrupt(int  irq, void *  dev,
-				     struct pt_regs *  regs)
+static irqreturn_t  omap_wakeup_interrupt(int irq, void *dev)
 {
 	return IRQ_HANDLED;
 }
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index c4b7902..4cc98a5 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -204,8 +204,7 @@ void __init omap_serial_init(void)
 
 #ifdef CONFIG_OMAP_SERIAL_WAKE
 
-static irqreturn_t omap_serial_wake_interrupt(int irq, void *dev_id,
-					      struct pt_regs *regs)
+static irqreturn_t omap_serial_wake_interrupt(int irq, void *dev_id)
 {
 	/* Need to do something with serial port right after wake-up? */
 	return IRQ_HANDLED;
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index 4d91b9f..1b7e4a5 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -160,8 +160,7 @@ static unsigned long omap_mpu_timer_gettimeoffset(void)
  * Latency during the interrupt is calculated using timer1.
  * Both timer0 and timer1 are counting at 6MHz (P2 6.5MHz).
  */
-static irqreturn_t omap_mpu_timer_interrupt(int irq, void *dev_id,
-					struct pt_regs *regs)
+static irqreturn_t omap_mpu_timer_interrupt(int irq, void *dev_id)
 {
 	unsigned long now, latency;
 
@@ -169,7 +168,7 @@ static irqreturn_t omap_mpu_timer_interrupt(int irq, void *dev_id,
 	now = 0 - omap_mpu_timer_read(0);
 	latency = MPU_TICKS_PER_SEC / HZ - omap_mpu_timer_read(1);
 	omap_mpu_timer_last = now - latency;
-	timer_tick(regs);
+	timer_tick();
 	write_sequnlock(&xtime_lock);
 
 	return IRQ_HANDLED;
@@ -182,8 +181,7 @@ static struct irqaction omap_mpu_timer_irq = {
 };
 
 static unsigned long omap_mpu_timer1_overflows;
-static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id,
-					     struct pt_regs *regs)
+static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id)
 {
 	omap_mpu_timer1_overflows++;
 	return IRQ_HANDLED;