[PATCH] ARM: 2806/1: OMAP update 5/11: Move board files into mach-omap1 directory

Patch from Tony Lindgren

This patch by Paul Mundt and other OMAP developers
moves OMAP1 board files into mach-omap1 directory.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 258 insertions, 0 deletions

diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
new file mode 100644
index 0000000..d882f43
--- /dev/null
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -0,0 +1,258 @@
+/*
+ * linux/arch/arm/mach-omap1/board-voiceblue.c
+ *
+ * Modified from board-generic.c
+ *
+ * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
+ *
+ * Code for OMAP5910 based VoiceBlue board (VoIP to GSM gateway).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_reg.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/tc.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/usb.h>
+
+#include "common.h"
+
+extern void omap_init_time(void);
+extern int omap_gpio_init(void);
+
+static struct plat_serial8250_port voiceblue_ports[] = {
+	{
+		.mapbase	= (unsigned long)(OMAP_CS1_PHYS + 0x40000),
+		.irq		= OMAP_GPIO_IRQ(12),
+		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 1,
+		.uartclk	= 3686400,
+	},
+	{
+		.mapbase	= (unsigned long)(OMAP_CS1_PHYS + 0x50000),
+		.irq		= OMAP_GPIO_IRQ(13),
+		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 1,
+		.uartclk	= 3686400,
+	},
+	{
+		.mapbase	= (unsigned long)(OMAP_CS1_PHYS + 0x60000),
+		.irq		= OMAP_GPIO_IRQ(14),
+		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 1,
+		.uartclk	= 3686400,
+	},
+	{
+		.mapbase	= (unsigned long)(OMAP_CS1_PHYS + 0x70000),
+		.irq		= OMAP_GPIO_IRQ(15),
+		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
+		.iotype		= UPIO_MEM,
+		.regshift	= 1,
+		.uartclk	= 3686400,
+	},
+	{ },
+};
+
+static struct platform_device serial_device = {
+	.name			= "serial8250",
+	.id			= 1,
+	.dev			= {
+		.platform_data	= voiceblue_ports,
+	},
+};
+
+static int __init ext_uart_init(void)
+{
+	return platform_device_register(&serial_device);
+}
+arch_initcall(ext_uart_init);
+
+static struct resource voiceblue_smc91x_resources[] = {
+	[0] = {
+		.start	= OMAP_CS2_PHYS + 0x300,
+		.end	= OMAP_CS2_PHYS + 0x300 + 16,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= OMAP_GPIO_IRQ(8),
+		.end	= OMAP_GPIO_IRQ(8),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device voiceblue_smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(voiceblue_smc91x_resources),
+	.resource	= voiceblue_smc91x_resources,
+};
+
+static struct platform_device *voiceblue_devices[] __initdata = {
+	&voiceblue_smc91x_device,
+};
+
+static struct omap_usb_config voiceblue_usb_config __initdata = {
+	.hmc_mode	= 3,
+	.register_host	= 1,
+	.register_dev   = 1,
+	.pins[0]	= 2,
+	.pins[1]	= 6,
+	.pins[2]	= 6,
+};
+
+static struct omap_board_config_kernel voiceblue_config[] = {
+	{ OMAP_TAG_USB, &voiceblue_usb_config },
+};
+
+static void __init voiceblue_init_irq(void)
+{
+	omap_init_irq();
+	omap_gpio_init();
+}
+
+static void __init voiceblue_init(void)
+{
+	/* There is a good chance board is going up, so enable Power LED
+	 * (it is connected through invertor) */
+	omap_writeb(0x00, OMAP_LPG1_LCR);
+	/* Watchdog */
+	omap_request_gpio(0);
+	/* smc91x reset */
+	omap_request_gpio(7);
+	omap_set_gpio_direction(7, 0);
+	omap_set_gpio_dataout(7, 1);
+	udelay(2);	/* wait at least 100ns */
+	omap_set_gpio_dataout(7, 0);
+	mdelay(50);	/* 50ms until PHY ready */
+	/* smc91x interrupt pin */
+	omap_request_gpio(8);
+	omap_set_gpio_edge_ctrl(8, OMAP_GPIO_RISING_EDGE);
+	/* 16C554 reset*/
+	omap_request_gpio(6);
+	omap_set_gpio_direction(6, 0);
+	omap_set_gpio_dataout(6, 0);
+	/* 16C554 interrupt pins */
+	omap_request_gpio(12);
+	omap_request_gpio(13);
+	omap_request_gpio(14);
+	omap_request_gpio(15);
+	omap_set_gpio_edge_ctrl(12, OMAP_GPIO_RISING_EDGE);
+	omap_set_gpio_edge_ctrl(13, OMAP_GPIO_RISING_EDGE);
+	omap_set_gpio_edge_ctrl(14, OMAP_GPIO_RISING_EDGE);
+	omap_set_gpio_edge_ctrl(15, OMAP_GPIO_RISING_EDGE);
+
+	platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
+	omap_board_config = voiceblue_config;
+	omap_board_config_size = ARRAY_SIZE(voiceblue_config);
+}
+
+static int __initdata omap_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 1};
+
+static void __init voiceblue_map_io(void)
+{
+	omap_map_io();
+	omap_serial_init(omap_serial_ports);
+}
+
+#define MACHINE_PANICED		1
+#define MACHINE_REBOOTING	2
+#define MACHINE_REBOOT		4
+static unsigned long machine_state;
+
+static int panic_event(struct notifier_block *this, unsigned long event,
+	 void *ptr)
+{
+	if (test_and_set_bit(MACHINE_PANICED, &machine_state))
+		return NOTIFY_DONE;
+
+	/* Flash Power LED
+	 * (TODO: Enable clock right way (enabled in bootloader already)) */
+	omap_writeb(0x78, OMAP_LPG1_LCR);
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block panic_block = {
+	.notifier_call	= panic_event,
+};
+
+static int __init setup_notifier(void)
+{
+	/* Setup panic notifier */
+	notifier_chain_register(&panic_notifier_list, &panic_block);
+
+	return 0;
+}
+
+postcore_initcall(setup_notifier);
+
+static int wdt_gpio_state;
+
+void voiceblue_wdt_enable(void)
+{
+	omap_set_gpio_direction(0, 0);
+	omap_set_gpio_dataout(0, 0);
+	omap_set_gpio_dataout(0, 1);
+	omap_set_gpio_dataout(0, 0);
+	wdt_gpio_state = 0;
+}
+
+void voiceblue_wdt_disable(void)
+{
+	omap_set_gpio_dataout(0, 0);
+	omap_set_gpio_dataout(0, 1);
+	omap_set_gpio_dataout(0, 0);
+	omap_set_gpio_direction(0, 1);
+}
+
+void voiceblue_wdt_ping(void)
+{
+	if (test_bit(MACHINE_REBOOT, &machine_state))
+		return;
+
+	wdt_gpio_state = !wdt_gpio_state;
+	omap_set_gpio_dataout(0, wdt_gpio_state);
+}
+
+void voiceblue_reset(void)
+{
+	set_bit(MACHINE_REBOOT, &machine_state);
+	voiceblue_wdt_enable();
+	while (1) ;
+}
+
+EXPORT_SYMBOL(voiceblue_wdt_enable);
+EXPORT_SYMBOL(voiceblue_wdt_disable);
+EXPORT_SYMBOL(voiceblue_wdt_ping);
+
+MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
+	/* Maintainer: Ladislav Michl <michl@2n.cz> */
+	.phys_ram	= 0x10000000,
+	.phys_io	= 0xfff00000,
+	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
+	.boot_params	= 0x10000100,
+	.map_io		= voiceblue_map_io,
+	.init_irq	= voiceblue_init_irq,
+	.init_machine	= voiceblue_init,
+	.timer		= &omap_timer,
+MACHINE_END