summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-nomadik
diff options
context:
space:
mode:
authorLinus Walleij <linus.walleij@linaro.org>2013-01-03 23:39:44 +0100
committerLinus Walleij <linus.walleij@linaro.org>2013-01-28 22:53:12 +0100
commita352d85adbe8ed0c5c8c69e3ea0ee1833b3ee27e (patch)
tree393fdf515217be92a6330609f2c6a6373ab7794e /arch/arm/mach-nomadik
parentf8060f5446b1f2782f0a8ca9be2d870ea4198aee (diff)
downloadop-kernel-dev-a352d85adbe8ed0c5c8c69e3ea0ee1833b3ee27e.zip
op-kernel-dev-a352d85adbe8ed0c5c8c69e3ea0ee1833b3ee27e.tar.gz
ARM: nomadik: move last custom calls to pinctrl
The I2C pins were still set up using custom nmk_* calls, move these to use the pinctrl mapping table instead. There was also a remaining call to turn the Ethernet pin to GPIO, and this is now done implicitly by the GPIO-to-pinctrl range translation calls. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'arch/arm/mach-nomadik')
-rw-r--r--arch/arm/mach-nomadik/board-nhk8815.c10
-rw-r--r--arch/arm/mach-nomadik/i2c-8815nhk.c11
2 files changed, 9 insertions, 12 deletions
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index aaed48d..72ec3fa 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -238,7 +238,6 @@ static int __init nhk8815_eth_init(void)
int err;
err = gpio_request(gpio_nr, "eth_irq");
- if (!err) err = nmk_gpio_set_mode(gpio_nr, NMK_GPIO_ALT_GPIO);
if (!err) err = gpio_direction_input(gpio_nr);
if (err)
pr_err("Error %i in %s\n", err, __func__);
@@ -321,6 +320,15 @@ static struct pinctrl_map __initdata nhk8815_pinmap[] = {
PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO111_H21", in_nopull),
/* CD bias drive */
PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO112_J21", out_low),
+ /* I2C0 */
+ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO62_D3", in_pullup),
+ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO63_D2", in_pullup),
+ /* I2C1 */
+ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO53_L4", in_pullup),
+ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO54_L3", in_pullup),
+ /* I2C2 */
+ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO73_C21", in_pullup),
+ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO74_C20", in_pullup),
};
static void __init nhk8815_platform_init(void)
diff --git a/arch/arm/mach-nomadik/i2c-8815nhk.c b/arch/arm/mach-nomadik/i2c-8815nhk.c
index 0c2f662..f0e9e64 100644
--- a/arch/arm/mach-nomadik/i2c-8815nhk.c
+++ b/arch/arm/mach-nomadik/i2c-8815nhk.c
@@ -4,7 +4,6 @@
#include <linux/i2c-algo-bit.h>
#include <linux/i2c-gpio.h>
#include <linux/platform_device.h>
-#include <linux/platform_data/pinctrl-nomadik.h>
/*
* There are two busses in the 8815NHK.
@@ -57,18 +56,8 @@ static struct platform_device nhk8815_i2c_dev2 = {
},
};
-static pin_cfg_t cpu8815_pins_i2c[] = {
- PIN_CFG_INPUT(62, GPIO, PULLUP),
- PIN_CFG_INPUT(63, GPIO, PULLUP),
- PIN_CFG_INPUT(53, GPIO, PULLUP),
- PIN_CFG_INPUT(54, GPIO, PULLUP),
- PIN_CFG_INPUT(73, GPIO, PULLUP),
- PIN_CFG_INPUT(74, GPIO, PULLUP),
-};
-
static int __init nhk8815_i2c_init(void)
{
- nmk_config_pins(cpu8815_pins_i2c, ARRAY_SIZE(cpu8815_pins_i2c));
platform_device_register(&nhk8815_i2c_dev0);
platform_device_register(&nhk8815_i2c_dev1);
platform_device_register(&nhk8815_i2c_dev2);
OpenPOWER on IntegriCloud