ARM i.MX: Merge i.MX5 support into mach-imx

This patch moves the contents of arch/arm/mach-mx5 to arch/arm/mach-imx
and adjusts the Makefile/Kconfig entries in a way that it's possible
to compile i.MX5 together with i.MX3/6.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>

32 files changed, 0 insertions, 7660 deletions

diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
deleted file mode 100644
index af0c212..0000000
--- a/arch/arm/mach-mx5/Kconfig
+++ /dev/null
@@ -1,244 +0,0 @@
-if ARCH_MX5
-
-# ARCH_MX5/50/53 are left to mark places where prevent multi-soc in single
-# image. So for most time, SOC_IMX50/51/53 should be used.
-
-config ARCH_MX51
-	bool
-
-config ARCH_MX50
-	bool
-
-config ARCH_MX53
-	bool
-
-config SOC_IMX50
-	bool
-	select CPU_V7
-	select ARM_L1_CACHE_SHIFT_6
-	select MXC_TZIC
-	select ARCH_MXC_IOMUX_V3
-	select ARCH_MXC_AUDMUX_V2
-	select ARCH_HAS_CPUFREQ
-	select ARCH_MX50
-
-config	SOC_IMX51
-	bool
-	select CPU_V7
-	select ARM_L1_CACHE_SHIFT_6
-	select MXC_TZIC
-	select ARCH_MXC_IOMUX_V3
-	select ARCH_MXC_AUDMUX_V2
-	select ARCH_HAS_CPUFREQ
-	select ARCH_MX51
-
-config	SOC_IMX53
-	bool
-	select CPU_V7
-	select ARM_L1_CACHE_SHIFT_6
-	select MXC_TZIC
-	select ARCH_MXC_IOMUX_V3
-	select ARCH_MX53
-
-#comment "i.MX50 machines:"
-
-config MACH_MX50_RDP
-	bool "Support MX50 reference design platform"
-	depends on BROKEN
-	select SOC_IMX50
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	help
-	  Include support for MX50 reference design platform (RDP) board. This
-	  includes specific configurations for the board and its peripherals.
-
-comment "i.MX51 machines:"
-
-config MACH_IMX51_DT
-	bool "Support i.MX51 platforms from device tree"
-	select SOC_IMX51
-	select USE_OF
-	select MACH_MX51_BABBAGE
-	help
-	  Include support for Freescale i.MX51 based platforms
-	  using the device tree for discovery
-
-config MACH_MX51_BABBAGE
-	bool "Support MX51 BABBAGE platforms"
-	select SOC_IMX51
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	help
-	  Include support for MX51 Babbage platform, also known as MX51EVK in
-	  u-boot. This includes specific configurations for the board and its
-	  peripherals.
-
-config MACH_MX51_3DS
-	bool "Support MX51PDK (3DS)"
-	select SOC_IMX51
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_KEYPAD
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	select MXC_DEBUG_BOARD
-	help
-	  Include support for MX51PDK (3DS) platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_EUKREA_CPUIMX51
-	bool "Support Eukrea CPUIMX51 module"
-	select SOC_IMX51
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	help
-	  Include support for Eukrea CPUIMX51 platform. This includes
-	  specific configurations for the module and its peripherals.
-
-choice
-	prompt "Baseboard"
-	depends on MACH_EUKREA_CPUIMX51
-	default MACH_EUKREA_MBIMX51_BASEBOARD
-
-config MACH_EUKREA_MBIMX51_BASEBOARD
-	prompt "Eukrea MBIMX51 development board"
-	bool
-	select IMX_HAVE_PLATFORM_IMX_KEYPAD
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select LEDS_GPIO_REGISTER
-	help
-	  This adds board specific devices that can be found on Eukrea's
-	  MBIMX51 evaluation board.
-
-endchoice
-
-config MACH_EUKREA_CPUIMX51SD
-	bool "Support Eukrea CPUIMX51SD module"
-	select SOC_IMX51
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	help
-	  Include support for Eukrea CPUIMX51SD platform. This includes
-	  specific configurations for the module and its peripherals.
-
-choice
-	prompt "Baseboard"
-	depends on MACH_EUKREA_CPUIMX51SD
-	default MACH_EUKREA_MBIMXSD51_BASEBOARD
-
-config MACH_EUKREA_MBIMXSD51_BASEBOARD
-	prompt "Eukrea MBIMXSD development board"
-	bool
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select LEDS_GPIO_REGISTER
-	help
-	  This adds board specific devices that can be found on Eukrea's
-	  MBIMXSD evaluation board.
-
-endchoice
-
-config MX51_EFIKA_COMMON
-	bool
-	select SOC_IMX51
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_PATA_IMX
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	select MXC_ULPI if USB_ULPI
-
-config MACH_MX51_EFIKAMX
-	bool "Support MX51 Genesi Efika MX nettop"
-	select LEDS_GPIO_REGISTER
-	select MX51_EFIKA_COMMON
-	help
-	  Include support for Genesi Efika MX nettop. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_MX51_EFIKASB
-	bool "Support MX51 Genesi Efika Smartbook"
-	select LEDS_GPIO_REGISTER
-	select MX51_EFIKA_COMMON
-	help
-	  Include support for Genesi Efika Smartbook. This includes specific
-	  configurations for the board and its peripherals.
-
-comment "i.MX53 machines:"
-
-config MACH_IMX53_DT
-	bool "Support i.MX53 platforms from device tree"
-	select SOC_IMX53
-	select USE_OF
-	select MACH_MX53_ARD
-	select MACH_MX53_EVK
-	select MACH_MX53_LOCO
-	select MACH_MX53_SMD
-	help
-	  Include support for Freescale i.MX53 based platforms
-	  using the device tree for discovery
-
-config MACH_MX53_EVK
-	bool "Support MX53 EVK platforms"
-	select SOC_IMX53
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	select LEDS_GPIO_REGISTER
-	help
-	  Include support for MX53 EVK platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_MX53_SMD
-	bool "Support MX53 SMD platforms"
-	select SOC_IMX53
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	help
-	  Include support for MX53 SMD platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_MX53_LOCO
-	bool "Support MX53 LOCO platforms"
-	select SOC_IMX53
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select IMX_HAVE_PLATFORM_GPIO_KEYS
-	select LEDS_GPIO_REGISTER
-	help
-	  Include support for MX53 LOCO platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_MX53_ARD
-	bool "Support MX53 ARD platforms"
-	select SOC_IMX53
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select IMX_HAVE_PLATFORM_GPIO_KEYS
-	help
-	  Include support for MX53 ARD platform. This includes specific
-	  configurations for the board and its peripherals.
-
-endif
diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
deleted file mode 100644
index 0fc6080..0000000
--- a/arch/arm/mach-mx5/Makefile
+++ /dev/null
@@ -1,26 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-obj-y   := cpu.o mm.o clock-mx51-mx53.o ehci.o system.o
-
-obj-$(CONFIG_PM) += pm-imx5.o
-obj-$(CONFIG_CPU_FREQ_IMX)    += cpu_op-mx51.o
-obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o
-obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o
-obj-$(CONFIG_MACH_MX53_EVK) += board-mx53_evk.o
-obj-$(CONFIG_MACH_MX53_SMD) += board-mx53_smd.o
-obj-$(CONFIG_MACH_MX53_LOCO) += board-mx53_loco.o
-obj-$(CONFIG_MACH_MX53_ARD) += board-mx53_ard.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += board-cpuimx51.o
-obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += board-cpuimx51sd.o
-obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd-baseboard.o
-obj-$(CONFIG_MX51_EFIKA_COMMON) += mx51_efika.o
-obj-$(CONFIG_MACH_MX51_EFIKAMX) += board-mx51_efikamx.o
-obj-$(CONFIG_MACH_MX51_EFIKASB) += board-mx51_efikasb.o
-obj-$(CONFIG_MACH_MX50_RDP) += board-mx50_rdp.o
-
-obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
-obj-$(CONFIG_MACH_IMX53_DT) += imx53-dt.o
diff --git a/arch/arm/mach-mx5/Makefile.boot b/arch/arm/mach-mx5/Makefile.boot
deleted file mode 100644
index ca207ca..0000000
--- a/arch/arm/mach-mx5/Makefile.boot
+++ /dev/null
@@ -1,9 +0,0 @@
-   zreladdr-$(CONFIG_ARCH_MX50)	+= 0x70008000
-params_phys-$(CONFIG_ARCH_MX50)	:= 0x70000100
-initrd_phys-$(CONFIG_ARCH_MX50)	:= 0x70800000
-   zreladdr-$(CONFIG_ARCH_MX51)	+= 0x90008000
-params_phys-$(CONFIG_ARCH_MX51)	:= 0x90000100
-initrd_phys-$(CONFIG_ARCH_MX51)	:= 0x90800000
-   zreladdr-$(CONFIG_ARCH_MX53)	+= 0x70008000
-params_phys-$(CONFIG_ARCH_MX53)	:= 0x70000100
-initrd_phys-$(CONFIG_ARCH_MX53)	:= 0x70800000
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
deleted file mode 100644
index 1fc1103..0000000
--- a/arch/arm/mach-mx5/board-cpuimx51.c
+++ /dev/null
@@ -1,300 +0,0 @@
-/*
- *
- * Copyright (C) 2010 Eric Bénard <eric@eukrea.com>
- *
- * based on board-mx51_babbage.c which is
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-
-#include <mach/eukrea-baseboards.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx51.h"
-
-#define CPUIMX51_USBH1_STP	IMX_GPIO_NR(1, 27)
-#define CPUIMX51_QUARTA_GPIO	IMX_GPIO_NR(3, 28)
-#define CPUIMX51_QUARTB_GPIO	IMX_GPIO_NR(3, 25)
-#define CPUIMX51_QUARTC_GPIO	IMX_GPIO_NR(3, 26)
-#define CPUIMX51_QUARTD_GPIO	IMX_GPIO_NR(3, 27)
-#define CPUIMX51_QUART_XTAL	14745600
-#define CPUIMX51_QUART_REGSHIFT	17
-
-/* USB_CTRL_1 */
-#define MX51_USB_CTRL_1_OFFSET		0x10
-#define MX51_USB_CTRL_UH1_EXT_CLK_EN	(1 << 25)
-
-#define	MX51_USB_PLLDIV_12_MHZ		0x00
-#define	MX51_USB_PLL_DIV_19_2_MHZ	0x01
-#define	MX51_USB_PLL_DIV_24_MHZ		0x02
-
-static struct plat_serial8250_port serial_platform_data[] = {
-	{
-		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x400000),
-		.irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTA_GPIO),
-		.irqflags = IRQF_TRIGGER_HIGH,
-		.uartclk = CPUIMX51_QUART_XTAL,
-		.regshift = CPUIMX51_QUART_REGSHIFT,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x800000),
-		.irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTB_GPIO),
-		.irqflags = IRQF_TRIGGER_HIGH,
-		.uartclk = CPUIMX51_QUART_XTAL,
-		.regshift = CPUIMX51_QUART_REGSHIFT,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x1000000),
-		.irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTC_GPIO),
-		.irqflags = IRQF_TRIGGER_HIGH,
-		.uartclk = CPUIMX51_QUART_XTAL,
-		.regshift = CPUIMX51_QUART_REGSHIFT,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000),
-		.irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTD_GPIO),
-		.irqflags = IRQF_TRIGGER_HIGH,
-		.uartclk = CPUIMX51_QUART_XTAL,
-		.regshift = CPUIMX51_QUART_REGSHIFT,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-	}
-};
-
-static struct platform_device serial_device = {
-	.name = "serial8250",
-	.id = 0,
-	.dev = {
-		.platform_data = serial_platform_data,
-	},
-};
-
-static struct platform_device *devices[] __initdata = {
-	&serial_device,
-};
-
-static iomux_v3_cfg_t eukrea_cpuimx51_pads[] = {
-	/* UART1 */
-	MX51_PAD_UART1_RXD__UART1_RXD,
-	MX51_PAD_UART1_TXD__UART1_TXD,
-	MX51_PAD_UART1_RTS__UART1_RTS,
-	MX51_PAD_UART1_CTS__UART1_CTS,
-
-	/* I2C2 */
-	MX51_PAD_GPIO1_2__I2C2_SCL,
-	MX51_PAD_GPIO1_3__I2C2_SDA,
-	MX51_PAD_NANDF_D10__GPIO3_30,
-
-	/* QUART IRQ */
-	MX51_PAD_NANDF_D15__GPIO3_25,
-	MX51_PAD_NANDF_D14__GPIO3_26,
-	MX51_PAD_NANDF_D13__GPIO3_27,
-	MX51_PAD_NANDF_D12__GPIO3_28,
-
-	/* USB HOST1 */
-	MX51_PAD_USBH1_CLK__USBH1_CLK,
-	MX51_PAD_USBH1_DIR__USBH1_DIR,
-	MX51_PAD_USBH1_NXT__USBH1_NXT,
-	MX51_PAD_USBH1_DATA0__USBH1_DATA0,
-	MX51_PAD_USBH1_DATA1__USBH1_DATA1,
-	MX51_PAD_USBH1_DATA2__USBH1_DATA2,
-	MX51_PAD_USBH1_DATA3__USBH1_DATA3,
-	MX51_PAD_USBH1_DATA4__USBH1_DATA4,
-	MX51_PAD_USBH1_DATA5__USBH1_DATA5,
-	MX51_PAD_USBH1_DATA6__USBH1_DATA6,
-	MX51_PAD_USBH1_DATA7__USBH1_DATA7,
-	MX51_PAD_USBH1_STP__USBH1_STP,
-};
-
-static const struct mxc_nand_platform_data
-		eukrea_cpuimx51_nand_board_info __initconst = {
-	.width		= 1,
-	.hw_ecc		= 1,
-	.flash_bbt	= 1,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const
-struct imxi2c_platform_data eukrea_cpuimx51_i2c_data __initconst = {
-	.bitrate = 100000,
-};
-
-static struct i2c_board_info eukrea_cpuimx51_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	},
-};
-
-/* This function is board specific as the bit mask for the plldiv will also
-be different for other Freescale SoCs, thus a common bitmask is not
-possible and cannot get place in /plat-mxc/ehci.c.*/
-static int initialize_otg_port(struct platform_device *pdev)
-{
-	u32 v;
-	void __iomem *usb_base;
-	void __iomem *usbother_base;
-
-	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
-	if (!usb_base)
-		return -ENOMEM;
-	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
-	/* Set the PHY clock to 19.2MHz */
-	v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
-	v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
-	v |= MX51_USB_PLL_DIV_19_2_MHZ;
-	__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
-	iounmap(usb_base);
-
-	mdelay(10);
-
-	return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY);
-}
-
-static int initialize_usbh1_port(struct platform_device *pdev)
-{
-	u32 v;
-	void __iomem *usb_base;
-	void __iomem *usbother_base;
-
-	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
-	if (!usb_base)
-		return -ENOMEM;
-	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
-	/* The clock for the USBH1 ULPI port will come externally from the PHY. */
-	v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET);
-	__raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET);
-	iounmap(usb_base);
-
-	mdelay(10);
-
-	return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED |
-			MXC_EHCI_ITC_NO_THRESHOLD);
-}
-
-static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
-	.init		= initialize_otg_port,
-	.portsc	= MXC_EHCI_UTMI_16BIT,
-};
-
-static const struct fsl_usb2_platform_data usb_pdata __initconst = {
-	.operating_mode	= FSL_USB2_DR_DEVICE,
-	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
-};
-
-static const struct mxc_usbh_platform_data usbh1_config __initconst = {
-	.init		= initialize_usbh1_port,
-	.portsc	= MXC_EHCI_MODE_ULPI,
-};
-
-static int otg_mode_host;
-
-static int __init eukrea_cpuimx51_otg_mode(char *options)
-{
-	if (!strcmp(options, "host"))
-		otg_mode_host = 1;
-	else if (!strcmp(options, "device"))
-		otg_mode_host = 0;
-	else
-		pr_info("otg_mode neither \"host\" nor \"device\". "
-			"Defaulting to device\n");
-	return 0;
-}
-__setup("otg_mode=", eukrea_cpuimx51_otg_mode);
-
-/*
- * Board specific initialization.
- */
-static void __init eukrea_cpuimx51_init(void)
-{
-	imx51_soc_init();
-
-	mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51_pads,
-					ARRAY_SIZE(eukrea_cpuimx51_pads));
-
-	imx51_add_imx_uart(0, &uart_pdata);
-	imx51_add_mxc_nand(&eukrea_cpuimx51_nand_board_info);
-
-	gpio_request(CPUIMX51_QUARTA_GPIO, "quarta_irq");
-	gpio_direction_input(CPUIMX51_QUARTA_GPIO);
-	gpio_free(CPUIMX51_QUARTA_GPIO);
-	gpio_request(CPUIMX51_QUARTB_GPIO, "quartb_irq");
-	gpio_direction_input(CPUIMX51_QUARTB_GPIO);
-	gpio_free(CPUIMX51_QUARTB_GPIO);
-	gpio_request(CPUIMX51_QUARTC_GPIO, "quartc_irq");
-	gpio_direction_input(CPUIMX51_QUARTC_GPIO);
-	gpio_free(CPUIMX51_QUARTC_GPIO);
-	gpio_request(CPUIMX51_QUARTD_GPIO, "quartd_irq");
-	gpio_direction_input(CPUIMX51_QUARTD_GPIO);
-	gpio_free(CPUIMX51_QUARTD_GPIO);
-
-	imx51_add_fec(NULL);
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	imx51_add_imx_i2c(1, &eukrea_cpuimx51_i2c_data);
-	i2c_register_board_info(1, eukrea_cpuimx51_i2c_devices,
-				ARRAY_SIZE(eukrea_cpuimx51_i2c_devices));
-
-	if (otg_mode_host)
-		imx51_add_mxc_ehci_otg(&dr_utmi_config);
-	else {
-		initialize_otg_port(NULL);
-		imx51_add_fsl_usb2_udc(&usb_pdata);
-	}
-	imx51_add_mxc_ehci_hs(1, &usbh1_config);
-
-#ifdef CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD
-	eukrea_mbimx51_baseboard_init();
-#endif
-}
-
-static void __init eukrea_cpuimx51_timer_init(void)
-{
-	mx51_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-static struct sys_timer mxc_timer = {
-	.init	= eukrea_cpuimx51_timer_init,
-};
-
-MACHINE_START(EUKREA_CPUIMX51, "Eukrea CPUIMX51 Module")
-	/* Maintainer: Eric Bénard <eric@eukrea.com> */
-	.atag_offset = 0x100,
-	.map_io = mx51_map_io,
-	.init_early = imx51_init_early,
-	.init_irq = mx51_init_irq,
-	.handle_irq = imx51_handle_irq,
-	.timer = &mxc_timer,
-	.init_machine = eukrea_cpuimx51_init,
-MACHINE_END
diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c
deleted file mode 100644
index 52a11c1..0000000
--- a/arch/arm/mach-mx5/board-cpuimx51sd.c
+++ /dev/null
@@ -1,338 +0,0 @@
-/*
- *
- * Copyright (C) 2010 Eric Bénard <eric@eukrea.com>
- *
- * based on board-mx51_babbage.c which is
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/i2c/tsc2007.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/i2c-gpio.h>
-#include <linux/spi/spi.h>
-#include <linux/can/platform/mcp251x.h>
-
-#include <mach/eukrea-baseboards.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx51.h"
-#include "cpu_op-mx51.h"
-
-#define USBH1_RST		IMX_GPIO_NR(2, 28)
-#define ETH_RST			IMX_GPIO_NR(2, 31)
-#define TSC2007_IRQGPIO		IMX_GPIO_NR(3, 12)
-#define CAN_IRQGPIO		IMX_GPIO_NR(1, 1)
-#define CAN_RST			IMX_GPIO_NR(4, 15)
-#define CAN_NCS			IMX_GPIO_NR(4, 24)
-#define CAN_RXOBF		IMX_GPIO_NR(1, 4)
-#define CAN_RX1BF		IMX_GPIO_NR(1, 6)
-#define CAN_TXORTS		IMX_GPIO_NR(1, 7)
-#define CAN_TX1RTS		IMX_GPIO_NR(1, 8)
-#define CAN_TX2RTS		IMX_GPIO_NR(1, 9)
-#define I2C_SCL			IMX_GPIO_NR(4, 16)
-#define I2C_SDA			IMX_GPIO_NR(4, 17)
-
-/* USB_CTRL_1 */
-#define MX51_USB_CTRL_1_OFFSET		0x10
-#define MX51_USB_CTRL_UH1_EXT_CLK_EN	(1 << 25)
-
-#define	MX51_USB_PLLDIV_12_MHZ		0x00
-#define	MX51_USB_PLL_DIV_19_2_MHZ	0x01
-#define	MX51_USB_PLL_DIV_24_MHZ		0x02
-
-static iomux_v3_cfg_t eukrea_cpuimx51sd_pads[] = {
-	/* UART1 */
-	MX51_PAD_UART1_RXD__UART1_RXD,
-	MX51_PAD_UART1_TXD__UART1_TXD,
-	MX51_PAD_UART1_RTS__UART1_RTS,
-	MX51_PAD_UART1_CTS__UART1_CTS,
-
-	/* USB HOST1 */
-	MX51_PAD_USBH1_CLK__USBH1_CLK,
-	MX51_PAD_USBH1_DIR__USBH1_DIR,
-	MX51_PAD_USBH1_NXT__USBH1_NXT,
-	MX51_PAD_USBH1_DATA0__USBH1_DATA0,
-	MX51_PAD_USBH1_DATA1__USBH1_DATA1,
-	MX51_PAD_USBH1_DATA2__USBH1_DATA2,
-	MX51_PAD_USBH1_DATA3__USBH1_DATA3,
-	MX51_PAD_USBH1_DATA4__USBH1_DATA4,
-	MX51_PAD_USBH1_DATA5__USBH1_DATA5,
-	MX51_PAD_USBH1_DATA6__USBH1_DATA6,
-	MX51_PAD_USBH1_DATA7__USBH1_DATA7,
-	MX51_PAD_USBH1_STP__USBH1_STP,
-	MX51_PAD_EIM_CS3__GPIO2_28,		/* PHY nRESET */
-
-	/* FEC */
-	MX51_PAD_EIM_DTACK__GPIO2_31,		/* PHY nRESET */
-
-	/* HSI2C */
-	MX51_PAD_I2C1_CLK__GPIO4_16,
-	MX51_PAD_I2C1_DAT__GPIO4_17,
-
-	/* CAN */
-	MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
-	MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
-	MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
-	MX51_PAD_CSPI1_SS0__GPIO4_24,		/* nCS */
-	MX51_PAD_CSI2_PIXCLK__GPIO4_15,		/* nReset */
-	MX51_PAD_GPIO1_1__GPIO1_1,		/* IRQ */
-	MX51_PAD_GPIO1_4__GPIO1_4,		/* Control signals */
-	MX51_PAD_GPIO1_6__GPIO1_6,
-	MX51_PAD_GPIO1_7__GPIO1_7,
-	MX51_PAD_GPIO1_8__GPIO1_8,
-	MX51_PAD_GPIO1_9__GPIO1_9,
-
-	/* Touchscreen */
-	/* IRQ */
-	NEW_PAD_CTRL(MX51_PAD_GPIO_NAND__GPIO_NAND, PAD_CTL_PUS_22K_UP |
-			PAD_CTL_PKE | PAD_CTL_SRE_FAST |
-			PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct tsc2007_platform_data tsc2007_info = {
-	.model			= 2007,
-	.x_plate_ohms		= 180,
-};
-
-static struct i2c_board_info eukrea_cpuimx51sd_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	}, {
-		I2C_BOARD_INFO("tsc2007", 0x49),
-		.type		= "tsc2007",
-		.platform_data	= &tsc2007_info,
-		.irq		= IMX_GPIO_TO_IRQ(TSC2007_IRQGPIO),
-	},
-};
-
-static const struct mxc_nand_platform_data
-		eukrea_cpuimx51sd_nand_board_info __initconst = {
-	.width		= 1,
-	.hw_ecc		= 1,
-	.flash_bbt	= 1,
-};
-
-/* This function is board specific as the bit mask for the plldiv will also
-be different for other Freescale SoCs, thus a common bitmask is not
-possible and cannot get place in /plat-mxc/ehci.c.*/
-static int initialize_otg_port(struct platform_device *pdev)
-{
-	u32 v;
-	void __iomem *usb_base;
-	void __iomem *usbother_base;
-
-	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
-	if (!usb_base)
-		return -ENOMEM;
-	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
-	/* Set the PHY clock to 19.2MHz */
-	v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
-	v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
-	v |= MX51_USB_PLL_DIV_19_2_MHZ;
-	__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
-	iounmap(usb_base);
-
-	mdelay(10);
-
-	return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY);
-}
-
-static int initialize_usbh1_port(struct platform_device *pdev)
-{
-	u32 v;
-	void __iomem *usb_base;
-	void __iomem *usbother_base;
-
-	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
-	if (!usb_base)
-		return -ENOMEM;
-	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
-	/* The clock for the USBH1 ULPI port will come from the PHY. */
-	v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET);
-	__raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN,
-			usbother_base + MX51_USB_CTRL_1_OFFSET);
-	iounmap(usb_base);
-
-	mdelay(10);
-
-	return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED |
-			MXC_EHCI_ITC_NO_THRESHOLD);
-}
-
-static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
-	.init		= initialize_otg_port,
-	.portsc	= MXC_EHCI_UTMI_16BIT,
-};
-
-static const struct fsl_usb2_platform_data usb_pdata __initconst = {
-	.operating_mode	= FSL_USB2_DR_DEVICE,
-	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
-};
-
-static const struct mxc_usbh_platform_data usbh1_config __initconst = {
-	.init		= initialize_usbh1_port,
-	.portsc	= MXC_EHCI_MODE_ULPI,
-};
-
-static int otg_mode_host;
-
-static int __init eukrea_cpuimx51sd_otg_mode(char *options)
-{
-	if (!strcmp(options, "host"))
-		otg_mode_host = 1;
-	else if (!strcmp(options, "device"))
-		otg_mode_host = 0;
-	else
-		pr_info("otg_mode neither \"host\" nor \"device\". "
-			"Defaulting to device\n");
-	return 0;
-}
-__setup("otg_mode=", eukrea_cpuimx51sd_otg_mode);
-
-static struct i2c_gpio_platform_data pdata = {
-	.sda_pin		= I2C_SDA,
-	.sda_is_open_drain	= 0,
-	.scl_pin		= I2C_SCL,
-	.scl_is_open_drain	= 0,
-	.udelay			= 2,
-};
-
-static struct platform_device hsi2c_gpio_device = {
-	.name			= "i2c-gpio",
-	.id			= 0,
-	.dev.platform_data	= &pdata,
-};
-
-static struct mcp251x_platform_data mcp251x_info = {
-	.oscillator_frequency = 24E6,
-};
-
-static struct spi_board_info cpuimx51sd_spi_device[] = {
-	{
-		.modalias        = "mcp2515",
-		.max_speed_hz    = 10000000,
-		.bus_num         = 0,
-		.mode		= SPI_MODE_0,
-		.chip_select     = 0,
-		.platform_data   = &mcp251x_info,
-		.irq             = IMX_GPIO_TO_IRQ(CAN_IRQGPIO)
-	},
-};
-
-static int cpuimx51sd_spi1_cs[] = {
-	CAN_NCS,
-};
-
-static const struct spi_imx_master cpuimx51sd_ecspi1_pdata __initconst = {
-	.chipselect	= cpuimx51sd_spi1_cs,
-	.num_chipselect	= ARRAY_SIZE(cpuimx51sd_spi1_cs),
-};
-
-static struct platform_device *platform_devices[] __initdata = {
-	&hsi2c_gpio_device,
-};
-
-static void __init eukrea_cpuimx51sd_init(void)
-{
-	imx51_soc_init();
-
-	mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51sd_pads,
-					ARRAY_SIZE(eukrea_cpuimx51sd_pads));
-
-#if defined(CONFIG_CPU_FREQ_IMX)
-	get_cpu_op = mx51_get_cpu_op;
-#endif
-
-	imx51_add_imx_uart(0, &uart_pdata);
-	imx51_add_mxc_nand(&eukrea_cpuimx51sd_nand_board_info);
-
-	gpio_request(ETH_RST, "eth_rst");
-	gpio_set_value(ETH_RST, 1);
-	imx51_add_fec(NULL);
-
-	gpio_request(CAN_IRQGPIO, "can_irq");
-	gpio_direction_input(CAN_IRQGPIO);
-	gpio_free(CAN_IRQGPIO);
-	gpio_request(CAN_NCS, "can_ncs");
-	gpio_direction_output(CAN_NCS, 1);
-	gpio_free(CAN_NCS);
-	gpio_request(CAN_RST, "can_rst");
-	gpio_direction_output(CAN_RST, 0);
-	msleep(20);
-	gpio_set_value(CAN_RST, 1);
-	imx51_add_ecspi(0, &cpuimx51sd_ecspi1_pdata);
-	spi_register_board_info(cpuimx51sd_spi_device,
-				ARRAY_SIZE(cpuimx51sd_spi_device));
-
-	gpio_request(TSC2007_IRQGPIO, "tsc2007_irq");
-	gpio_direction_input(TSC2007_IRQGPIO);
-	gpio_free(TSC2007_IRQGPIO);
-
-	i2c_register_board_info(0, eukrea_cpuimx51sd_i2c_devices,
-			ARRAY_SIZE(eukrea_cpuimx51sd_i2c_devices));
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-
-	if (otg_mode_host)
-		imx51_add_mxc_ehci_otg(&dr_utmi_config);
-	else {
-		initialize_otg_port(NULL);
-		imx51_add_fsl_usb2_udc(&usb_pdata);
-	}
-
-	gpio_request(USBH1_RST, "usb_rst");
-	gpio_direction_output(USBH1_RST, 0);
-	msleep(20);
-	gpio_set_value(USBH1_RST, 1);
-	imx51_add_mxc_ehci_hs(1, &usbh1_config);
-
-#ifdef CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD
-	eukrea_mbimxsd51_baseboard_init();
-#endif
-}
-
-static void __init eukrea_cpuimx51sd_timer_init(void)
-{
-	mx51_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-static struct sys_timer mxc_timer = {
-	.init	= eukrea_cpuimx51sd_timer_init,
-};
-
-MACHINE_START(EUKREA_CPUIMX51SD, "Eukrea CPUIMX51SD")
-	/* Maintainer: Eric Bénard <eric@eukrea.com> */
-	.atag_offset = 0x100,
-	.map_io = mx51_map_io,
-	.init_early = imx51_init_early,
-	.init_irq = mx51_init_irq,
-	.handle_irq = imx51_handle_irq,
-	.timer = &mxc_timer,
-	.init_machine = eukrea_cpuimx51sd_init,
-MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx50_rdp.c b/arch/arm/mach-mx5/board-mx50_rdp.c
deleted file mode 100644
index fc3621d..0000000
--- a/arch/arm/mach-mx5/board-mx50_rdp.c
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx50.h>
-
-#include <asm/irq.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx50.h"
-
-#define FEC_EN		IMX_GPIO_NR(6, 23)
-#define FEC_RESET_B	IMX_GPIO_NR(4, 12)
-
-static iomux_v3_cfg_t mx50_rdp_pads[] __initdata = {
-	/* SD1 */
-	MX50_PAD_ECSPI2_SS0__GPIO_4_19,
-	MX50_PAD_EIM_CRE__GPIO_1_27,
-	MX50_PAD_SD1_CMD__SD1_CMD,
-
-	MX50_PAD_SD1_CLK__SD1_CLK,
-	MX50_PAD_SD1_D0__SD1_D0,
-	MX50_PAD_SD1_D1__SD1_D1,
-	MX50_PAD_SD1_D2__SD1_D2,
-	MX50_PAD_SD1_D3__SD1_D3,
-
-	/* SD2 */
-	MX50_PAD_SD2_CD__GPIO_5_17,
-	MX50_PAD_SD2_WP__GPIO_5_16,
-	MX50_PAD_SD2_CMD__SD2_CMD,
-	MX50_PAD_SD2_CLK__SD2_CLK,
-	MX50_PAD_SD2_D0__SD2_D0,
-	MX50_PAD_SD2_D1__SD2_D1,
-	MX50_PAD_SD2_D2__SD2_D2,
-	MX50_PAD_SD2_D3__SD2_D3,
-	MX50_PAD_SD2_D4__SD2_D4,
-	MX50_PAD_SD2_D5__SD2_D5,
-	MX50_PAD_SD2_D6__SD2_D6,
-	MX50_PAD_SD2_D7__SD2_D7,
-
-	/* SD3 */
-	MX50_PAD_SD3_CMD__SD3_CMD,
-	MX50_PAD_SD3_CLK__SD3_CLK,
-	MX50_PAD_SD3_D0__SD3_D0,
-	MX50_PAD_SD3_D1__SD3_D1,
-	MX50_PAD_SD3_D2__SD3_D2,
-	MX50_PAD_SD3_D3__SD3_D3,
-	MX50_PAD_SD3_D4__SD3_D4,
-	MX50_PAD_SD3_D5__SD3_D5,
-	MX50_PAD_SD3_D6__SD3_D6,
-	MX50_PAD_SD3_D7__SD3_D7,
-
-	/* PWR_INT */
-	MX50_PAD_ECSPI2_MISO__GPIO_4_18,
-
-	/* UART pad setting */
-	MX50_PAD_UART1_TXD__UART1_TXD,
-	MX50_PAD_UART1_RXD__UART1_RXD,
-	MX50_PAD_UART1_RTS__UART1_RTS,
-	MX50_PAD_UART2_TXD__UART2_TXD,
-	MX50_PAD_UART2_RXD__UART2_RXD,
-	MX50_PAD_UART2_CTS__UART2_CTS,
-	MX50_PAD_UART2_RTS__UART2_RTS,
-
-	MX50_PAD_I2C1_SCL__I2C1_SCL,
-	MX50_PAD_I2C1_SDA__I2C1_SDA,
-	MX50_PAD_I2C2_SCL__I2C2_SCL,
-	MX50_PAD_I2C2_SDA__I2C2_SDA,
-
-	MX50_PAD_EPITO__USBH1_PWR,
-	/* Need to comment below line if
-	 * one needs to debug owire.
-	 */
-	MX50_PAD_OWIRE__USBH1_OC,
-	/* using gpio to control otg pwr */
-	MX50_PAD_PWM2__GPIO_6_25,
-	MX50_PAD_I2C3_SCL__USBOTG_OC,
-
-	MX50_PAD_SSI_RXC__FEC_MDIO,
-	MX50_PAD_SSI_RXFS__FEC_MDC,
-	MX50_PAD_DISP_D0__FEC_TXCLK,
-	MX50_PAD_DISP_D1__FEC_RX_ER,
-	MX50_PAD_DISP_D2__FEC_RX_DV,
-	MX50_PAD_DISP_D3__FEC_RXD1,
-	MX50_PAD_DISP_D4__FEC_RXD0,
-	MX50_PAD_DISP_D5__FEC_TX_EN,
-	MX50_PAD_DISP_D6__FEC_TXD1,
-	MX50_PAD_DISP_D7__FEC_TXD0,
-	MX50_PAD_I2C3_SDA__GPIO_6_23,
-	MX50_PAD_ECSPI1_SCLK__GPIO_4_12,
-
-	MX50_PAD_CSPI_SS0__CSPI_SS0,
-	MX50_PAD_ECSPI1_MOSI__CSPI_SS1,
-	MX50_PAD_CSPI_MOSI__CSPI_MOSI,
-	MX50_PAD_CSPI_MISO__CSPI_MISO,
-
-	/* SGTL500_OSC_EN */
-	MX50_PAD_UART1_CTS__GPIO_6_8,
-
-	/* SGTL_AMP_SHDN */
-	MX50_PAD_UART3_RXD__GPIO_6_15,
-
-	/* Keypad */
-	MX50_PAD_KEY_COL0__KEY_COL0,
-	MX50_PAD_KEY_ROW0__KEY_ROW0,
-	MX50_PAD_KEY_COL1__KEY_COL1,
-	MX50_PAD_KEY_ROW1__KEY_ROW1,
-	MX50_PAD_KEY_COL2__KEY_COL2,
-	MX50_PAD_KEY_ROW2__KEY_ROW2,
-	MX50_PAD_KEY_COL3__KEY_COL3,
-	MX50_PAD_KEY_ROW3__KEY_ROW3,
-	MX50_PAD_EIM_DA0__KEY_COL4,
-	MX50_PAD_EIM_DA1__KEY_ROW4,
-	MX50_PAD_EIM_DA2__KEY_COL5,
-	MX50_PAD_EIM_DA3__KEY_ROW5,
-	MX50_PAD_EIM_DA4__KEY_COL6,
-	MX50_PAD_EIM_DA5__KEY_ROW6,
-	MX50_PAD_EIM_DA6__KEY_COL7,
-	MX50_PAD_EIM_DA7__KEY_ROW7,
-	/*EIM pads */
-	MX50_PAD_EIM_DA8__GPIO_1_8,
-	MX50_PAD_EIM_DA9__GPIO_1_9,
-	MX50_PAD_EIM_DA10__GPIO_1_10,
-	MX50_PAD_EIM_DA11__GPIO_1_11,
-	MX50_PAD_EIM_DA12__GPIO_1_12,
-	MX50_PAD_EIM_DA13__GPIO_1_13,
-	MX50_PAD_EIM_DA14__GPIO_1_14,
-	MX50_PAD_EIM_DA15__GPIO_1_15,
-	MX50_PAD_EIM_CS2__GPIO_1_16,
-	MX50_PAD_EIM_CS1__GPIO_1_17,
-	MX50_PAD_EIM_CS0__GPIO_1_18,
-	MX50_PAD_EIM_EB0__GPIO_1_19,
-	MX50_PAD_EIM_EB1__GPIO_1_20,
-	MX50_PAD_EIM_WAIT__GPIO_1_21,
-	MX50_PAD_EIM_BCLK__GPIO_1_22,
-	MX50_PAD_EIM_RDY__GPIO_1_23,
-	MX50_PAD_EIM_OE__GPIO_1_24,
-};
-
-/* Serial ports */
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct fec_platform_data fec_data __initconst = {
-	.phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static inline void mx50_rdp_fec_reset(void)
-{
-	gpio_request(FEC_EN, "fec-en");
-	gpio_direction_output(FEC_EN, 0);
-	gpio_request(FEC_RESET_B, "fec-reset_b");
-	gpio_direction_output(FEC_RESET_B, 0);
-	msleep(1);
-	gpio_set_value(FEC_RESET_B, 1);
-}
-
-static const struct imxi2c_platform_data i2c_data __initconst = {
-	.bitrate = 100000,
-};
-
-/*
- * Board specific initialization.
- */
-static void __init mx50_rdp_board_init(void)
-{
-	imx50_soc_init();
-
-	mxc_iomux_v3_setup_multiple_pads(mx50_rdp_pads,
-					ARRAY_SIZE(mx50_rdp_pads));
-
-	imx50_add_imx_uart(0, &uart_pdata);
-	imx50_add_imx_uart(1, &uart_pdata);
-	mx50_rdp_fec_reset();
-	imx50_add_fec(&fec_data);
-	imx50_add_imx_i2c(0, &i2c_data);
-	imx50_add_imx_i2c(1, &i2c_data);
-	imx50_add_imx_i2c(2, &i2c_data);
-}
-
-static void __init mx50_rdp_timer_init(void)
-{
-	mx50_clocks_init(32768, 24000000, 22579200);
-}
-
-static struct sys_timer mx50_rdp_timer = {
-	.init	= mx50_rdp_timer_init,
-};
-
-MACHINE_START(MX50_RDP, "Freescale MX50 Reference Design Platform")
-	.map_io = mx50_map_io,
-	.init_early = imx50_init_early,
-	.init_irq = mx50_init_irq,
-	.handle_irq = imx50_handle_irq,
-	.timer = &mx50_rdp_timer,
-	.init_machine = mx50_rdp_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c
deleted file mode 100644
index 0578390..0000000
--- a/arch/arm/mach-mx5/board-mx51_3ds.c
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2010 Jason Wang <jason77.wang@gmail.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx51.h>
-#include <mach/3ds_debugboard.h>
-
-#include "devices-imx51.h"
-
-#define EXPIO_PARENT_INT	gpio_to_irq(IMX_GPIO_NR(1, 6))
-#define MX51_3DS_ECSPI2_CS	(GPIO_PORTC + 28)
-
-static iomux_v3_cfg_t mx51_3ds_pads[] = {
-	/* UART1 */
-	MX51_PAD_UART1_RXD__UART1_RXD,
-	MX51_PAD_UART1_TXD__UART1_TXD,
-	MX51_PAD_UART1_RTS__UART1_RTS,
-	MX51_PAD_UART1_CTS__UART1_CTS,
-
-	/* UART2 */
-	MX51_PAD_UART2_RXD__UART2_RXD,
-	MX51_PAD_UART2_TXD__UART2_TXD,
-	MX51_PAD_EIM_D25__UART2_CTS,
-	MX51_PAD_EIM_D26__UART2_RTS,
-
-	/* UART3 */
-	MX51_PAD_UART3_RXD__UART3_RXD,
-	MX51_PAD_UART3_TXD__UART3_TXD,
-	MX51_PAD_EIM_D24__UART3_CTS,
-	MX51_PAD_EIM_D27__UART3_RTS,
-
-	/* CPLD PARENT IRQ PIN */
-	MX51_PAD_GPIO1_6__GPIO1_6,
-
-	/* KPP */
-	MX51_PAD_KEY_ROW0__KEY_ROW0,
-	MX51_PAD_KEY_ROW1__KEY_ROW1,
-	MX51_PAD_KEY_ROW2__KEY_ROW2,
-	MX51_PAD_KEY_ROW3__KEY_ROW3,
-	MX51_PAD_KEY_COL0__KEY_COL0,
-	MX51_PAD_KEY_COL1__KEY_COL1,
-	MX51_PAD_KEY_COL2__KEY_COL2,
-	MX51_PAD_KEY_COL3__KEY_COL3,
-	MX51_PAD_KEY_COL4__KEY_COL4,
-	MX51_PAD_KEY_COL5__KEY_COL5,
-
-	/* eCSPI2 */
-	MX51_PAD_NANDF_RB2__ECSPI2_SCLK,
-	MX51_PAD_NANDF_RB3__ECSPI2_MISO,
-	MX51_PAD_NANDF_D15__ECSPI2_MOSI,
-	MX51_PAD_NANDF_D12__GPIO3_28,
-};
-
-/* Serial ports */
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static int mx51_3ds_board_keymap[] = {
-	KEY(0, 0, KEY_1),
-	KEY(0, 1, KEY_2),
-	KEY(0, 2, KEY_3),
-	KEY(0, 3, KEY_F1),
-	KEY(0, 4, KEY_UP),
-	KEY(0, 5, KEY_F2),
-
-	KEY(1, 0, KEY_4),
-	KEY(1, 1, KEY_5),
-	KEY(1, 2, KEY_6),
-	KEY(1, 3, KEY_LEFT),
-	KEY(1, 4, KEY_SELECT),
-	KEY(1, 5, KEY_RIGHT),
-
-	KEY(2, 0, KEY_7),
-	KEY(2, 1, KEY_8),
-	KEY(2, 2, KEY_9),
-	KEY(2, 3, KEY_F3),
-	KEY(2, 4, KEY_DOWN),
-	KEY(2, 5, KEY_F4),
-
-	KEY(3, 0, KEY_0),
-	KEY(3, 1, KEY_OK),
-	KEY(3, 2, KEY_ESC),
-	KEY(3, 3, KEY_ENTER),
-	KEY(3, 4, KEY_MENU),
-	KEY(3, 5, KEY_BACK)
-};
-
-static const struct matrix_keymap_data mx51_3ds_map_data __initconst = {
-	.keymap		= mx51_3ds_board_keymap,
-	.keymap_size	= ARRAY_SIZE(mx51_3ds_board_keymap),
-};
-
-static int mx51_3ds_spi2_cs[] = {
-	MXC_SPI_CS(0),
-	MX51_3DS_ECSPI2_CS,
-};
-
-static const struct spi_imx_master mx51_3ds_ecspi2_pdata __initconst = {
-	.chipselect	= mx51_3ds_spi2_cs,
-	.num_chipselect	= ARRAY_SIZE(mx51_3ds_spi2_cs),
-};
-
-static struct spi_board_info mx51_3ds_spi_nor_device[] = {
-	{
-	 .modalias = "m25p80",
-	 .max_speed_hz = 25000000,	/* max spi clock (SCK) speed in HZ */
-	 .bus_num = 1,
-	 .chip_select = 1,
-	 .mode = SPI_MODE_0,
-	 .platform_data = NULL,},
-};
-
-/*
- * Board specific initialization.
- */
-static void __init mx51_3ds_init(void)
-{
-	imx51_soc_init();
-
-	mxc_iomux_v3_setup_multiple_pads(mx51_3ds_pads,
-					ARRAY_SIZE(mx51_3ds_pads));
-
-	imx51_add_imx_uart(0, &uart_pdata);
-	imx51_add_imx_uart(1, &uart_pdata);
-	imx51_add_imx_uart(2, &uart_pdata);
-
-	imx51_add_ecspi(1, &mx51_3ds_ecspi2_pdata);
-	spi_register_board_info(mx51_3ds_spi_nor_device,
-				ARRAY_SIZE(mx51_3ds_spi_nor_device));
-
-	if (mxc_expio_init(MX51_CS5_BASE_ADDR, EXPIO_PARENT_INT))
-		printk(KERN_WARNING "Init of the debugboard failed, all "
-				    "devices on the board are unusable.\n");
-
-	imx51_add_sdhci_esdhc_imx(0, NULL);
-	imx51_add_imx_keypad(&mx51_3ds_map_data);
-	imx51_add_imx2_wdt(0, NULL);
-}
-
-static void __init mx51_3ds_timer_init(void)
-{
-	mx51_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-static struct sys_timer mx51_3ds_timer = {
-	.init = mx51_3ds_timer_init,
-};
-
-MACHINE_START(MX51_3DS, "Freescale MX51 3-Stack Board")
-	/* Maintainer: Freescale Semiconductor, Inc. */
-	.atag_offset = 0x100,
-	.map_io = mx51_map_io,
-	.init_early = imx51_init_early,
-	.init_irq = mx51_init_irq,
-	.handle_irq = imx51_handle_irq,
-	.timer = &mx51_3ds_timer,
-	.init_machine = mx51_3ds_init,
-MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
deleted file mode 100644
index 5c837603..0000000
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ /dev/null
@@ -1,429 +0,0 @@
-/*
- * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/input.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx51.h"
-#include "cpu_op-mx51.h"
-
-#define BABBAGE_USB_HUB_RESET	IMX_GPIO_NR(1, 7)
-#define BABBAGE_USBH1_STP	IMX_GPIO_NR(1, 27)
-#define BABBAGE_USB_PHY_RESET	IMX_GPIO_NR(2, 5)
-#define BABBAGE_FEC_PHY_RESET	IMX_GPIO_NR(2, 14)
-#define BABBAGE_POWER_KEY	IMX_GPIO_NR(2, 21)
-#define BABBAGE_ECSPI1_CS0	IMX_GPIO_NR(4, 24)
-#define BABBAGE_ECSPI1_CS1	IMX_GPIO_NR(4, 25)
-#define BABBAGE_SD2_CD		IMX_GPIO_NR(1, 6)
-#define BABBAGE_SD2_WP		IMX_GPIO_NR(1, 5)
-
-/* USB_CTRL_1 */
-#define MX51_USB_CTRL_1_OFFSET			0x10
-#define MX51_USB_CTRL_UH1_EXT_CLK_EN		(1 << 25)
-
-#define	MX51_USB_PLLDIV_12_MHZ		0x00
-#define	MX51_USB_PLL_DIV_19_2_MHZ	0x01
-#define	MX51_USB_PLL_DIV_24_MHZ	0x02
-
-static struct gpio_keys_button babbage_buttons[] = {
-	{
-		.gpio		= BABBAGE_POWER_KEY,
-		.code		= BTN_0,
-		.desc		= "PWR",
-		.active_low	= 1,
-		.wakeup		= 1,
-	},
-};
-
-static const struct gpio_keys_platform_data imx_button_data __initconst = {
-	.buttons	= babbage_buttons,
-	.nbuttons	= ARRAY_SIZE(babbage_buttons),
-};
-
-static iomux_v3_cfg_t mx51babbage_pads[] = {
-	/* UART1 */
-	MX51_PAD_UART1_RXD__UART1_RXD,
-	MX51_PAD_UART1_TXD__UART1_TXD,
-	MX51_PAD_UART1_RTS__UART1_RTS,
-	MX51_PAD_UART1_CTS__UART1_CTS,
-
-	/* UART2 */
-	MX51_PAD_UART2_RXD__UART2_RXD,
-	MX51_PAD_UART2_TXD__UART2_TXD,
-
-	/* UART3 */
-	MX51_PAD_EIM_D25__UART3_RXD,
-	MX51_PAD_EIM_D26__UART3_TXD,
-	MX51_PAD_EIM_D27__UART3_RTS,
-	MX51_PAD_EIM_D24__UART3_CTS,
-
-	/* I2C1 */
-	MX51_PAD_EIM_D16__I2C1_SDA,
-	MX51_PAD_EIM_D19__I2C1_SCL,
-
-	/* I2C2 */
-	MX51_PAD_KEY_COL4__I2C2_SCL,
-	MX51_PAD_KEY_COL5__I2C2_SDA,
-
-	/* HSI2C */
-	MX51_PAD_I2C1_CLK__I2C1_CLK,
-	MX51_PAD_I2C1_DAT__I2C1_DAT,
-
-	/* USB HOST1 */
-	MX51_PAD_USBH1_CLK__USBH1_CLK,
-	MX51_PAD_USBH1_DIR__USBH1_DIR,
-	MX51_PAD_USBH1_NXT__USBH1_NXT,
-	MX51_PAD_USBH1_DATA0__USBH1_DATA0,
-	MX51_PAD_USBH1_DATA1__USBH1_DATA1,
-	MX51_PAD_USBH1_DATA2__USBH1_DATA2,
-	MX51_PAD_USBH1_DATA3__USBH1_DATA3,
-	MX51_PAD_USBH1_DATA4__USBH1_DATA4,
-	MX51_PAD_USBH1_DATA5__USBH1_DATA5,
-	MX51_PAD_USBH1_DATA6__USBH1_DATA6,
-	MX51_PAD_USBH1_DATA7__USBH1_DATA7,
-
-	/* USB HUB reset line*/
-	MX51_PAD_GPIO1_7__GPIO1_7,
-
-	/* USB PHY reset line */
-	MX51_PAD_EIM_D21__GPIO2_5,
-
-	/* FEC */
-	MX51_PAD_EIM_EB2__FEC_MDIO,
-	MX51_PAD_EIM_EB3__FEC_RDATA1,
-	MX51_PAD_EIM_CS2__FEC_RDATA2,
-	MX51_PAD_EIM_CS3__FEC_RDATA3,
-	MX51_PAD_EIM_CS4__FEC_RX_ER,
-	MX51_PAD_EIM_CS5__FEC_CRS,
-	MX51_PAD_NANDF_RB2__FEC_COL,
-	MX51_PAD_NANDF_RB3__FEC_RX_CLK,
-	MX51_PAD_NANDF_D9__FEC_RDATA0,
-	MX51_PAD_NANDF_D8__FEC_TDATA0,
-	MX51_PAD_NANDF_CS2__FEC_TX_ER,
-	MX51_PAD_NANDF_CS3__FEC_MDC,
-	MX51_PAD_NANDF_CS4__FEC_TDATA1,
-	MX51_PAD_NANDF_CS5__FEC_TDATA2,
-	MX51_PAD_NANDF_CS6__FEC_TDATA3,
-	MX51_PAD_NANDF_CS7__FEC_TX_EN,
-	MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK,
-
-	/* FEC PHY reset line */
-	MX51_PAD_EIM_A20__GPIO2_14,
-
-	/* SD 1 */
-	MX51_PAD_SD1_CMD__SD1_CMD,
-	MX51_PAD_SD1_CLK__SD1_CLK,
-	MX51_PAD_SD1_DATA0__SD1_DATA0,
-	MX51_PAD_SD1_DATA1__SD1_DATA1,
-	MX51_PAD_SD1_DATA2__SD1_DATA2,
-	MX51_PAD_SD1_DATA3__SD1_DATA3,
-	/* CD/WP from controller */
-	MX51_PAD_GPIO1_0__SD1_CD,
-	MX51_PAD_GPIO1_1__SD1_WP,
-
-	/* SD 2 */
-	MX51_PAD_SD2_CMD__SD2_CMD,
-	MX51_PAD_SD2_CLK__SD2_CLK,
-	MX51_PAD_SD2_DATA0__SD2_DATA0,
-	MX51_PAD_SD2_DATA1__SD2_DATA1,
-	MX51_PAD_SD2_DATA2__SD2_DATA2,
-	MX51_PAD_SD2_DATA3__SD2_DATA3,
-	/* CD/WP gpio */
-	MX51_PAD_GPIO1_6__GPIO1_6,
-	MX51_PAD_GPIO1_5__GPIO1_5,
-
-	/* eCSPI1 */
-	MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
-	MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
-	MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
-	MX51_PAD_CSPI1_SS0__GPIO4_24,
-	MX51_PAD_CSPI1_SS1__GPIO4_25,
-};
-
-/* Serial ports */
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct imxi2c_platform_data babbage_i2c_data __initconst = {
-	.bitrate = 100000,
-};
-
-static const struct imxi2c_platform_data babbage_hsi2c_data __initconst = {
-	.bitrate = 400000,
-};
-
-static struct gpio mx51_babbage_usbh1_gpios[] = {
-	{ BABBAGE_USBH1_STP, GPIOF_OUT_INIT_LOW, "usbh1_stp" },
-	{ BABBAGE_USB_PHY_RESET, GPIOF_OUT_INIT_LOW, "usbh1_phy_reset" },
-};
-
-static int gpio_usbh1_active(void)
-{
-	iomux_v3_cfg_t usbh1stp_gpio = MX51_PAD_USBH1_STP__GPIO1_27;
-	int ret;
-
-	/* Set USBH1_STP to GPIO and toggle it */
-	mxc_iomux_v3_setup_pad(usbh1stp_gpio);
-	ret = gpio_request_array(mx51_babbage_usbh1_gpios,
-					ARRAY_SIZE(mx51_babbage_usbh1_gpios));
-
-	if (ret) {
-		pr_debug("failed to get USBH1 pins: %d\n", ret);
-		return ret;
-	}
-
-	msleep(100);
-	gpio_set_value(BABBAGE_USBH1_STP, 1);
-	gpio_set_value(BABBAGE_USB_PHY_RESET, 1);
-	gpio_free_array(mx51_babbage_usbh1_gpios,
-					ARRAY_SIZE(mx51_babbage_usbh1_gpios));
-	return 0;
-}
-
-static inline void babbage_usbhub_reset(void)
-{
-	int ret;
-
-	/* Reset USB hub */
-	ret = gpio_request_one(BABBAGE_USB_HUB_RESET,
-					GPIOF_OUT_INIT_LOW, "GPIO1_7");
-	if (ret) {
-		printk(KERN_ERR"failed to get GPIO_USB_HUB_RESET: %d\n", ret);
-		return;
-	}
-
-	msleep(2);
-	/* Deassert reset */
-	gpio_set_value(BABBAGE_USB_HUB_RESET, 1);
-}
-
-static inline void babbage_fec_reset(void)
-{
-	int ret;
-
-	/* reset FEC PHY */
-	ret = gpio_request_one(BABBAGE_FEC_PHY_RESET,
-					GPIOF_OUT_INIT_LOW, "fec-phy-reset");
-	if (ret) {
-		printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
-		return;
-	}
-	msleep(1);
-	gpio_set_value(BABBAGE_FEC_PHY_RESET, 1);
-}
-
-/* This function is board specific as the bit mask for the plldiv will also
-be different for other Freescale SoCs, thus a common bitmask is not
-possible and cannot get place in /plat-mxc/ehci.c.*/
-static int initialize_otg_port(struct platform_device *pdev)
-{
-	u32 v;
-	void __iomem *usb_base;
-	void __iomem *usbother_base;
-
-	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
-	if (!usb_base)
-		return -ENOMEM;
-	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
-	/* Set the PHY clock to 19.2MHz */
-	v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
-	v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
-	v |= MX51_USB_PLL_DIV_19_2_MHZ;
-	__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
-	iounmap(usb_base);
-
-	mdelay(10);
-
-	return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY);
-}
-
-static int initialize_usbh1_port(struct platform_device *pdev)
-{
-	u32 v;
-	void __iomem *usb_base;
-	void __iomem *usbother_base;
-
-	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
-	if (!usb_base)
-		return -ENOMEM;
-	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
-	/* The clock for the USBH1 ULPI port will come externally from the PHY. */
-	v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET);
-	__raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET);
-	iounmap(usb_base);
-
-	mdelay(10);
-
-	return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED |
-			MXC_EHCI_ITC_NO_THRESHOLD);
-}
-
-static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
-	.init		= initialize_otg_port,
-	.portsc	= MXC_EHCI_UTMI_16BIT,
-};
-
-static const struct fsl_usb2_platform_data usb_pdata __initconst = {
-	.operating_mode	= FSL_USB2_DR_DEVICE,
-	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
-};
-
-static const struct mxc_usbh_platform_data usbh1_config __initconst = {
-	.init		= initialize_usbh1_port,
-	.portsc	= MXC_EHCI_MODE_ULPI,
-};
-
-static int otg_mode_host;
-
-static int __init babbage_otg_mode(char *options)
-{
-	if (!strcmp(options, "host"))
-		otg_mode_host = 1;
-	else if (!strcmp(options, "device"))
-		otg_mode_host = 0;
-	else
-		pr_info("otg_mode neither \"host\" nor \"device\". "
-			"Defaulting to device\n");
-	return 0;
-}
-__setup("otg_mode=", babbage_otg_mode);
-
-static struct spi_board_info mx51_babbage_spi_board_info[] __initdata = {
-	{
-		.modalias = "mtd_dataflash",
-		.max_speed_hz = 25000000,
-		.bus_num = 0,
-		.chip_select = 1,
-		.mode = SPI_MODE_0,
-		.platform_data = NULL,
-	},
-};
-
-static int mx51_babbage_spi_cs[] = {
-	BABBAGE_ECSPI1_CS0,
-	BABBAGE_ECSPI1_CS1,
-};
-
-static const struct spi_imx_master mx51_babbage_spi_pdata __initconst = {
-	.chipselect     = mx51_babbage_spi_cs,
-	.num_chipselect = ARRAY_SIZE(mx51_babbage_spi_cs),
-};
-
-static const struct esdhc_platform_data mx51_babbage_sd1_data __initconst = {
-	.cd_type = ESDHC_CD_CONTROLLER,
-	.wp_type = ESDHC_WP_CONTROLLER,
-};
-
-static const struct esdhc_platform_data mx51_babbage_sd2_data __initconst = {
-	.cd_gpio = BABBAGE_SD2_CD,
-	.wp_gpio = BABBAGE_SD2_WP,
-	.cd_type = ESDHC_CD_GPIO,
-	.wp_type = ESDHC_WP_GPIO,
-};
-
-void __init imx51_babbage_common_init(void)
-{
-	mxc_iomux_v3_setup_multiple_pads(mx51babbage_pads,
-					 ARRAY_SIZE(mx51babbage_pads));
-}
-
-/*
- * Board specific initialization.
- */
-static void __init mx51_babbage_init(void)
-{
-	iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
-	iomux_v3_cfg_t power_key = NEW_PAD_CTRL(MX51_PAD_EIM_A27__GPIO2_21,
-		PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP);
-
-	imx51_soc_init();
-
-#if defined(CONFIG_CPU_FREQ_IMX)
-	get_cpu_op = mx51_get_cpu_op;
-#endif
-	imx51_babbage_common_init();
-
-	imx51_add_imx_uart(0, &uart_pdata);
-	imx51_add_imx_uart(1, NULL);
-	imx51_add_imx_uart(2, &uart_pdata);
-
-	babbage_fec_reset();
-	imx51_add_fec(NULL);
-
-	/* Set the PAD settings for the pwr key. */
-	mxc_iomux_v3_setup_pad(power_key);
-	imx_add_gpio_keys(&imx_button_data);
-
-	imx51_add_imx_i2c(0, &babbage_i2c_data);
-	imx51_add_imx_i2c(1, &babbage_i2c_data);
-	imx51_add_hsi2c(&babbage_hsi2c_data);
-
-	if (otg_mode_host)
-		imx51_add_mxc_ehci_otg(&dr_utmi_config);
-	else {
-		initialize_otg_port(NULL);
-		imx51_add_fsl_usb2_udc(&usb_pdata);
-	}
-
-	gpio_usbh1_active();
-	imx51_add_mxc_ehci_hs(1, &usbh1_config);
-	/* setback USBH1_STP to be function */
-	mxc_iomux_v3_setup_pad(usbh1stp);
-	babbage_usbhub_reset();
-
-	imx51_add_sdhci_esdhc_imx(0, &mx51_babbage_sd1_data);
-	imx51_add_sdhci_esdhc_imx(1, &mx51_babbage_sd2_data);
-
-	spi_register_board_info(mx51_babbage_spi_board_info,
-		ARRAY_SIZE(mx51_babbage_spi_board_info));
-	imx51_add_ecspi(0, &mx51_babbage_spi_pdata);
-	imx51_add_imx2_wdt(0, NULL);
-}
-
-static void __init mx51_babbage_timer_init(void)
-{
-	mx51_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-static struct sys_timer mx51_babbage_timer = {
-	.init = mx51_babbage_timer_init,
-};
-
-MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board")
-	/* Maintainer: Amit Kucheria <amit.kucheria@canonical.com> */
-	.atag_offset = 0x100,
-	.map_io = mx51_map_io,
-	.init_early = imx51_init_early,
-	.init_irq = mx51_init_irq,
-	.handle_irq = imx51_handle_irq,
-	.timer = &mx51_babbage_timer,
-	.init_machine = mx51_babbage_init,
-MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c
deleted file mode 100644
index a9e4866..0000000
--- a/arch/arm/mach-mx5/board-mx51_efikamx.c
+++ /dev/null
@@ -1,295 +0,0 @@
-/*
- * Copyright (C) 2010 Linaro Limited
- *
- * based on code from the following
- * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved.
- * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/mfd/mc13892.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/consumer.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx51.h"
-#include "efika.h"
-
-#define EFIKAMX_PCBID0		IMX_GPIO_NR(3, 16)
-#define EFIKAMX_PCBID1		IMX_GPIO_NR(3, 17)
-#define EFIKAMX_PCBID2		IMX_GPIO_NR(3, 11)
-
-#define EFIKAMX_BLUE_LED	IMX_GPIO_NR(3, 13)
-#define EFIKAMX_GREEN_LED	IMX_GPIO_NR(3, 14)
-#define EFIKAMX_RED_LED		IMX_GPIO_NR(3, 15)
-
-#define EFIKAMX_POWER_KEY	IMX_GPIO_NR(2, 31)
-
-/* board 1.1 doesn't have same reset gpio */
-#define EFIKAMX_RESET1_1	IMX_GPIO_NR(3, 2)
-#define EFIKAMX_RESET		IMX_GPIO_NR(1, 4)
-
-#define EFIKAMX_POWEROFF	IMX_GPIO_NR(4, 13)
-
-#define EFIKAMX_PMIC		IMX_GPIO_NR(1, 6)
-
-/* the pci ids pin have pull up. they're driven low according to board id */
-#define MX51_PAD_PCBID0	IOMUX_PAD(0x518, 0x130, 3, 0x0,   0, PAD_CTL_PUS_100K_UP)
-#define MX51_PAD_PCBID1	IOMUX_PAD(0x51C, 0x134, 3, 0x0,   0, PAD_CTL_PUS_100K_UP)
-#define MX51_PAD_PCBID2	IOMUX_PAD(0x504, 0x128, 3, 0x0,   0, PAD_CTL_PUS_100K_UP)
-#define MX51_PAD_PWRKEY	IOMUX_PAD(0x48c, 0x0f8, 1, 0x0,   0, PAD_CTL_PUS_100K_UP | PAD_CTL_PKE)
-
-static iomux_v3_cfg_t mx51efikamx_pads[] = {
-	/* board id */
-	MX51_PAD_PCBID0,
-	MX51_PAD_PCBID1,
-	MX51_PAD_PCBID2,
-
-	/* leds */
-	MX51_PAD_CSI1_D9__GPIO3_13,
-	MX51_PAD_CSI1_VSYNC__GPIO3_14,
-	MX51_PAD_CSI1_HSYNC__GPIO3_15,
-
-	/* power key */
-	MX51_PAD_PWRKEY,
-
-	/* reset */
-	MX51_PAD_DI1_PIN13__GPIO3_2,
-	MX51_PAD_GPIO1_4__GPIO1_4,
-
-	/* power off */
-	MX51_PAD_CSI2_VSYNC__GPIO4_13,
-};
-
-/*   PCBID2  PCBID1 PCBID0  STATE
-	1       1      1    ER1:rev1.1
-	1       1      0    ER2:rev1.2
-	1       0      1    ER3:rev1.3
-	1       0      0    ER4:rev1.4
-*/
-static void __init mx51_efikamx_board_id(void)
-{
-	int id;
-
-	/* things are taking time to settle */
-	msleep(150);
-
-	gpio_request(EFIKAMX_PCBID0, "pcbid0");
-	gpio_direction_input(EFIKAMX_PCBID0);
-	gpio_request(EFIKAMX_PCBID1, "pcbid1");
-	gpio_direction_input(EFIKAMX_PCBID1);
-	gpio_request(EFIKAMX_PCBID2, "pcbid2");
-	gpio_direction_input(EFIKAMX_PCBID2);
-
-	id = gpio_get_value(EFIKAMX_PCBID0) ? 1 : 0;
-	id |= (gpio_get_value(EFIKAMX_PCBID1) ? 1 : 0) << 1;
-	id |= (gpio_get_value(EFIKAMX_PCBID2) ? 1 : 0) << 2;
-
-	switch (id) {
-	case 7:
-		system_rev = 0x11;
-		break;
-	case 6:
-		system_rev = 0x12;
-		break;
-	case 5:
-		system_rev = 0x13;
-		break;
-	case 4:
-		system_rev = 0x14;
-		break;
-	default:
-		system_rev = 0x10;
-		break;
-	}
-
-	if ((system_rev == 0x10)
-		|| (system_rev == 0x12)
-		|| (system_rev == 0x14)) {
-		printk(KERN_WARNING
-			"EfikaMX: Unsupported board revision 1.%u!\n",
-			system_rev & 0xf);
-	}
-}
-
-static struct gpio_led mx51_efikamx_leds[] __initdata = {
-	{
-		.name = "efikamx:green",
-		.default_trigger = "default-on",
-		.gpio = EFIKAMX_GREEN_LED,
-	},
-	{
-		.name = "efikamx:red",
-		.default_trigger = "ide-disk",
-		.gpio = EFIKAMX_RED_LED,
-	},
-	{
-		.name = "efikamx:blue",
-		.default_trigger = "mmc0",
-		.gpio = EFIKAMX_BLUE_LED,
-	},
-};
-
-static const struct gpio_led_platform_data
-		mx51_efikamx_leds_data __initconst = {
-	.leds = mx51_efikamx_leds,
-	.num_leds = ARRAY_SIZE(mx51_efikamx_leds),
-};
-
-static struct esdhc_platform_data sd_pdata = {
-	.cd_type = ESDHC_CD_CONTROLLER,
-	.wp_type = ESDHC_WP_CONTROLLER,
-};
-
-static struct gpio_keys_button mx51_efikamx_powerkey[] = {
-	{
-		.code = KEY_POWER,
-		.gpio = EFIKAMX_POWER_KEY,
-		.type = EV_PWR,
-		.desc = "Power Button (CM)",
-		.wakeup = 1,
-		.debounce_interval = 10, /* ms */
-	},
-};
-
-static const struct gpio_keys_platform_data mx51_efikamx_powerkey_data __initconst = {
-	.buttons = mx51_efikamx_powerkey,
-	.nbuttons = ARRAY_SIZE(mx51_efikamx_powerkey),
-};
-
-void mx51_efikamx_reset(void)
-{
-	if (system_rev == 0x11)
-		gpio_direction_output(EFIKAMX_RESET1_1, 0);
-	else
-		gpio_direction_output(EFIKAMX_RESET, 0);
-}
-
-static struct regulator *pwgt1, *pwgt2, *coincell;
-
-static void mx51_efikamx_power_off(void)
-{
-	if (!IS_ERR(coincell))
-		regulator_disable(coincell);
-
-	if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
-		regulator_disable(pwgt2);
-		regulator_disable(pwgt1);
-	}
-	gpio_direction_output(EFIKAMX_POWEROFF, 1);
-}
-
-static int __init mx51_efikamx_power_init(void)
-{
-	if (machine_is_mx51_efikamx()) {
-		pwgt1 = regulator_get(NULL, "pwgt1");
-		pwgt2 = regulator_get(NULL, "pwgt2");
-		if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
-			regulator_enable(pwgt1);
-			regulator_enable(pwgt2);
-		}
-		gpio_request(EFIKAMX_POWEROFF, "poweroff");
-		pm_power_off = mx51_efikamx_power_off;
-
-		/* enable coincell charger. maybe need a small power driver ? */
-		coincell = regulator_get(NULL, "coincell");
-		if (!IS_ERR(coincell)) {
-			regulator_set_voltage(coincell, 3000000, 3000000);
-			regulator_enable(coincell);
-		}
-
-		regulator_has_full_constraints();
-	}
-
-	return 0;
-}
-late_initcall(mx51_efikamx_power_init);
-
-static void __init mx51_efikamx_init(void)
-{
-	imx51_soc_init();
-
-	mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads,
-					ARRAY_SIZE(mx51efikamx_pads));
-	efika_board_common_init();
-
-	mx51_efikamx_board_id();
-
-	/* on < 1.2 boards both SD controllers are used */
-	if (system_rev < 0x12) {
-		imx51_add_sdhci_esdhc_imx(0, NULL);
-		imx51_add_sdhci_esdhc_imx(1, &sd_pdata);
-		mx51_efikamx_leds[2].default_trigger = "mmc1";
-	} else
-		imx51_add_sdhci_esdhc_imx(0, &sd_pdata);
-
-	gpio_led_register_device(-1, &mx51_efikamx_leds_data);
-	imx_add_gpio_keys(&mx51_efikamx_powerkey_data);
-
-	if (system_rev == 0x11) {
-		gpio_request(EFIKAMX_RESET1_1, "reset");
-		gpio_direction_output(EFIKAMX_RESET1_1, 1);
-	} else {
-		gpio_request(EFIKAMX_RESET, "reset");
-		gpio_direction_output(EFIKAMX_RESET, 1);
-	}
-
-	/*
-	 * enable wifi by default only on mx
-	 * sb and mx have same wlan pin but the value to enable it are
-	 * different :/
-	 */
-	gpio_request(EFIKA_WLAN_EN, "wlan_en");
-	gpio_direction_output(EFIKA_WLAN_EN, 0);
-	msleep(10);
-
-	gpio_request(EFIKA_WLAN_RESET, "wlan_rst");
-	gpio_direction_output(EFIKA_WLAN_RESET, 0);
-	msleep(10);
-	gpio_set_value(EFIKA_WLAN_RESET, 1);
-}
-
-static void __init mx51_efikamx_timer_init(void)
-{
-	mx51_clocks_init(32768, 24000000, 22579200, 24576000);
-}
-
-static struct sys_timer mx51_efikamx_timer = {
-	.init = mx51_efikamx_timer_init,
-};
-
-MACHINE_START(MX51_EFIKAMX, "Genesi EfikaMX nettop")
-	/* Maintainer: Amit Kucheria <amit.kucheria@linaro.org> */
-	.atag_offset = 0x100,
-	.map_io = mx51_map_io,
-	.init_early = imx51_init_early,
-	.init_irq = mx51_init_irq,
-	.handle_irq = imx51_handle_irq,
-	.timer = &mx51_efikamx_timer,
-	.init_machine = mx51_efikamx_init,
-MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c
deleted file mode 100644
index 38c4a3e..0000000
--- a/arch/arm/mach-mx5/board-mx51_efikasb.c
+++ /dev/null
@@ -1,290 +0,0 @@
-/*
- * Copyright (C) Arnaud Patard <arnaud.patard@rtp-net.org>
- *
- * based on code from the following
- * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved.
- * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/mfd/mc13892.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/consumer.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <mach/ulpi.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx51.h"
-#include "efika.h"
-
-#define EFIKASB_USBH2_STP	IMX_GPIO_NR(2, 20)
-#define EFIKASB_GREEN_LED	IMX_GPIO_NR(1, 3)
-#define EFIKASB_WHITE_LED	IMX_GPIO_NR(2, 25)
-#define EFIKASB_PCBID0		IMX_GPIO_NR(2, 28)
-#define EFIKASB_PCBID1		IMX_GPIO_NR(2, 29)
-#define EFIKASB_PWRKEY		IMX_GPIO_NR(2, 31)
-#define EFIKASB_LID		IMX_GPIO_NR(3, 14)
-#define EFIKASB_POWEROFF	IMX_GPIO_NR(4, 13)
-#define EFIKASB_RFKILL		IMX_GPIO_NR(3, 1)
-
-#define MX51_PAD_PWRKEY IOMUX_PAD(0x48c, 0x0f8, 1, 0x0,   0, PAD_CTL_PUS_100K_UP | PAD_CTL_PKE)
-#define MX51_PAD_SD1_CD	IOMUX_PAD(0x47c, 0x0e8, 1, __NA_, 0, MX51_ESDHC_PAD_CTRL)
-
-static iomux_v3_cfg_t mx51efikasb_pads[] = {
-	/* USB HOST2 */
-	MX51_PAD_EIM_D16__USBH2_DATA0,
-	MX51_PAD_EIM_D17__USBH2_DATA1,
-	MX51_PAD_EIM_D18__USBH2_DATA2,
-	MX51_PAD_EIM_D19__USBH2_DATA3,
-	MX51_PAD_EIM_D20__USBH2_DATA4,
-	MX51_PAD_EIM_D21__USBH2_DATA5,
-	MX51_PAD_EIM_D22__USBH2_DATA6,
-	MX51_PAD_EIM_D23__USBH2_DATA7,
-	MX51_PAD_EIM_A24__USBH2_CLK,
-	MX51_PAD_EIM_A25__USBH2_DIR,
-	MX51_PAD_EIM_A26__USBH2_STP,
-	MX51_PAD_EIM_A27__USBH2_NXT,
-
-	/* leds */
-	MX51_PAD_EIM_CS0__GPIO2_25,
-	MX51_PAD_GPIO1_3__GPIO1_3,
-
-	/* pcb id */
-	MX51_PAD_EIM_CS3__GPIO2_28,
-	MX51_PAD_EIM_CS4__GPIO2_29,
-
-	/* lid */
-	MX51_PAD_CSI1_VSYNC__GPIO3_14,
-
-	/* power key*/
-	MX51_PAD_PWRKEY,
-
-	/* wifi/bt button */
-	MX51_PAD_DI1_PIN12__GPIO3_1,
-
-	/* power off */
-	MX51_PAD_CSI2_VSYNC__GPIO4_13,
-
-	/* wdog reset */
-	MX51_PAD_GPIO1_4__WDOG1_WDOG_B,
-
-	/* BT */
-	MX51_PAD_EIM_A17__GPIO2_11,
-
-	MX51_PAD_SD1_CD,
-};
-
-static int initialize_usbh2_port(struct platform_device *pdev)
-{
-	iomux_v3_cfg_t usbh2stp = MX51_PAD_EIM_A26__USBH2_STP;
-	iomux_v3_cfg_t usbh2gpio = MX51_PAD_EIM_A26__GPIO2_20;
-
-	mxc_iomux_v3_setup_pad(usbh2gpio);
-	gpio_request(EFIKASB_USBH2_STP, "usbh2_stp");
-	gpio_direction_output(EFIKASB_USBH2_STP, 0);
-	msleep(1);
-	gpio_set_value(EFIKASB_USBH2_STP, 1);
-	msleep(1);
-
-	gpio_free(EFIKASB_USBH2_STP);
-	mxc_iomux_v3_setup_pad(usbh2stp);
-
-	mdelay(10);
-
-	return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD);
-}
-
-static struct mxc_usbh_platform_data usbh2_config __initdata = {
-	.init   = initialize_usbh2_port,
-	.portsc = MXC_EHCI_MODE_ULPI,
-};
-
-static void __init mx51_efikasb_usb(void)
-{
-	usbh2_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-			ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND);
-	if (usbh2_config.otg)
-		imx51_add_mxc_ehci_hs(2, &usbh2_config);
-}
-
-static const struct gpio_led mx51_efikasb_leds[] __initconst = {
-	{
-		.name = "efikasb:green",
-		.default_trigger = "default-on",
-		.gpio = EFIKASB_GREEN_LED,
-		.active_low = 1,
-	},
-	{
-		.name = "efikasb:white",
-		.default_trigger = "caps",
-		.gpio = EFIKASB_WHITE_LED,
-	},
-};
-
-static const struct gpio_led_platform_data
-		mx51_efikasb_leds_data __initconst = {
-	.leds = mx51_efikasb_leds,
-	.num_leds = ARRAY_SIZE(mx51_efikasb_leds),
-};
-
-static struct gpio_keys_button mx51_efikasb_keys[] = {
-	{
-		.code = KEY_POWER,
-		.gpio = EFIKASB_PWRKEY,
-		.type = EV_KEY,
-		.desc = "Power Button",
-		.wakeup = 1,
-		.active_low = 1,
-	},
-	{
-		.code = SW_LID,
-		.gpio = EFIKASB_LID,
-		.type = EV_SW,
-		.desc = "Lid Switch",
-		.active_low = 1,
-	},
-	{
-		.code = KEY_RFKILL,
-		.gpio = EFIKASB_RFKILL,
-		.type = EV_KEY,
-		.desc = "rfkill",
-		.active_low = 1,
-	},
-};
-
-static const struct gpio_keys_platform_data mx51_efikasb_keys_data __initconst = {
-	.buttons = mx51_efikasb_keys,
-	.nbuttons = ARRAY_SIZE(mx51_efikasb_keys),
-};
-
-static struct esdhc_platform_data sd0_pdata = {
-#define EFIKASB_SD1_CD	IMX_GPIO_NR(2, 27)
-	.cd_gpio = EFIKASB_SD1_CD,
-	.cd_type = ESDHC_CD_GPIO,
-	.wp_type = ESDHC_WP_CONTROLLER,
-};
-
-static struct esdhc_platform_data sd1_pdata = {
-	.cd_type = ESDHC_CD_CONTROLLER,
-	.wp_type = ESDHC_WP_CONTROLLER,
-};
-
-static struct regulator *pwgt1, *pwgt2;
-
-static void mx51_efikasb_power_off(void)
-{
-	gpio_set_value(EFIKA_USB_PHY_RESET, 0);
-
-	if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
-		regulator_disable(pwgt2);
-		regulator_disable(pwgt1);
-	}
-	gpio_direction_output(EFIKASB_POWEROFF, 1);
-}
-
-static int __init mx51_efikasb_power_init(void)
-{
-	if (machine_is_mx51_efikasb()) {
-		pwgt1 = regulator_get(NULL, "pwgt1");
-		pwgt2 = regulator_get(NULL, "pwgt2");
-		if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) {
-			regulator_enable(pwgt1);
-			regulator_enable(pwgt2);
-		}
-		gpio_request(EFIKASB_POWEROFF, "poweroff");
-		pm_power_off = mx51_efikasb_power_off;
-
-		regulator_has_full_constraints();
-	}
-
-	return 0;
-}
-late_initcall(mx51_efikasb_power_init);
-
-/* 01     R1.3 board
-   10     R2.0 board */
-static void __init mx51_efikasb_board_id(void)
-{
-	int id;
-
-	gpio_request(EFIKASB_PCBID0, "pcb id0");
-	gpio_direction_input(EFIKASB_PCBID0);
-	gpio_request(EFIKASB_PCBID1, "pcb id1");
-	gpio_direction_input(EFIKASB_PCBID1);
-
-	id = gpio_get_value(EFIKASB_PCBID0) ? 1 : 0;
-	id |= (gpio_get_value(EFIKASB_PCBID1) ? 1 : 0) << 1;
-
-	switch (id) {
-	default:
-		break;
-	case 1:
-		system_rev = 0x13;
-		break;
-	case 2:
-		system_rev = 0x20;
-		break;
-	}
-}
-
-static void __init efikasb_board_init(void)
-{
-	imx51_soc_init();
-
-	mxc_iomux_v3_setup_multiple_pads(mx51efikasb_pads,
-					ARRAY_SIZE(mx51efikasb_pads));
-	efika_board_common_init();
-
-	mx51_efikasb_board_id();
-	mx51_efikasb_usb();
-	imx51_add_sdhci_esdhc_imx(0, &sd0_pdata);
-	imx51_add_sdhci_esdhc_imx(1, &sd1_pdata);
-
-	gpio_led_register_device(-1, &mx51_efikasb_leds_data);
-	imx_add_gpio_keys(&mx51_efikasb_keys_data);
-}
-
-static void __init mx51_efikasb_timer_init(void)
-{
-	mx51_clocks_init(32768, 24000000, 22579200, 24576000);
-}
-
-static struct sys_timer mx51_efikasb_timer = {
-	.init	= mx51_efikasb_timer_init,
-};
-
-MACHINE_START(MX51_EFIKASB, "Genesi Efika Smartbook")
-	.atag_offset = 0x100,
-	.map_io = mx51_map_io,
-	.init_early = imx51_init_early,
-	.init_irq = mx51_init_irq,
-	.handle_irq = imx51_handle_irq,
-	.init_machine =  efikasb_board_init,
-	.timer = &mx51_efikasb_timer,
-MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx53_ard.c b/arch/arm/mach-mx5/board-mx53_ard.c
deleted file mode 100644
index b88a2bc..0000000
--- a/arch/arm/mach-mx5/board-mx53_ard.c
+++ /dev/null
@@ -1,259 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/smsc911x.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx53.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx53.h"
-
-#define ARD_ETHERNET_INT_B	IMX_GPIO_NR(2, 31)
-#define ARD_SD1_CD		IMX_GPIO_NR(1, 1)
-#define ARD_SD1_WP		IMX_GPIO_NR(1, 9)
-#define ARD_I2CPORTEXP_B	IMX_GPIO_NR(2, 3)
-#define ARD_VOLUMEDOWN		IMX_GPIO_NR(4, 0)
-#define ARD_HOME			IMX_GPIO_NR(5, 10)
-#define ARD_BACK			IMX_GPIO_NR(5, 11)
-#define ARD_PROG			IMX_GPIO_NR(5, 12)
-#define ARD_VOLUMEUP		IMX_GPIO_NR(5, 13)
-
-static iomux_v3_cfg_t mx53_ard_pads[] = {
-	/* UART1 */
-	MX53_PAD_PATA_DIOW__UART1_TXD_MUX,
-	MX53_PAD_PATA_DMACK__UART1_RXD_MUX,
-	/* WEIM for CS1 */
-	MX53_PAD_EIM_EB3__GPIO2_31, /* ETHERNET_INT_B */
-	MX53_PAD_EIM_D16__EMI_WEIM_D_16,
-	MX53_PAD_EIM_D17__EMI_WEIM_D_17,
-	MX53_PAD_EIM_D18__EMI_WEIM_D_18,
-	MX53_PAD_EIM_D19__EMI_WEIM_D_19,
-	MX53_PAD_EIM_D20__EMI_WEIM_D_20,
-	MX53_PAD_EIM_D21__EMI_WEIM_D_21,
-	MX53_PAD_EIM_D22__EMI_WEIM_D_22,
-	MX53_PAD_EIM_D23__EMI_WEIM_D_23,
-	MX53_PAD_EIM_D24__EMI_WEIM_D_24,
-	MX53_PAD_EIM_D25__EMI_WEIM_D_25,
-	MX53_PAD_EIM_D26__EMI_WEIM_D_26,
-	MX53_PAD_EIM_D27__EMI_WEIM_D_27,
-	MX53_PAD_EIM_D28__EMI_WEIM_D_28,
-	MX53_PAD_EIM_D29__EMI_WEIM_D_29,
-	MX53_PAD_EIM_D30__EMI_WEIM_D_30,
-	MX53_PAD_EIM_D31__EMI_WEIM_D_31,
-	MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0,
-	MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1,
-	MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2,
-	MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3,
-	MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4,
-	MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5,
-	MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6,
-	MX53_PAD_EIM_OE__EMI_WEIM_OE,
-	MX53_PAD_EIM_RW__EMI_WEIM_RW,
-	MX53_PAD_EIM_CS1__EMI_WEIM_CS_1,
-	/* SDHC1 */
-	MX53_PAD_SD1_CMD__ESDHC1_CMD,
-	MX53_PAD_SD1_CLK__ESDHC1_CLK,
-	MX53_PAD_SD1_DATA0__ESDHC1_DAT0,
-	MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
-	MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
-	MX53_PAD_SD1_DATA3__ESDHC1_DAT3,
-	MX53_PAD_PATA_DATA8__ESDHC1_DAT4,
-	MX53_PAD_PATA_DATA9__ESDHC1_DAT5,
-	MX53_PAD_PATA_DATA10__ESDHC1_DAT6,
-	MX53_PAD_PATA_DATA11__ESDHC1_DAT7,
-	MX53_PAD_GPIO_1__GPIO1_1,
-	MX53_PAD_GPIO_9__GPIO1_9,
-	/* I2C2 */
-	MX53_PAD_EIM_EB2__I2C2_SCL,
-	MX53_PAD_KEY_ROW3__I2C2_SDA,
-	/* I2C3 */
-	MX53_PAD_GPIO_3__I2C3_SCL,
-	MX53_PAD_GPIO_16__I2C3_SDA,
-	/* GPIO */
-	MX53_PAD_DISP0_DAT16__GPIO5_10,	/* home */
-	MX53_PAD_DISP0_DAT17__GPIO5_11,	/* back */
-	MX53_PAD_DISP0_DAT18__GPIO5_12,	/* prog */
-	MX53_PAD_DISP0_DAT19__GPIO5_13,	/* vol up */
-	MX53_PAD_GPIO_10__GPIO4_0,		/* vol down */
-};
-
-#define GPIO_BUTTON(gpio_num, ev_code, act_low, descr, wake)	\
-{							\
-	.gpio		= gpio_num,				\
-	.type		= EV_KEY,				\
-	.code		= ev_code,				\
-	.active_low	= act_low,				\
-	.desc		= "btn " descr,			\
-	.wakeup		= wake,					\
-}
-
-static struct gpio_keys_button ard_buttons[] = {
-	GPIO_BUTTON(ARD_HOME, KEY_HOME, 1, "home", 0),
-	GPIO_BUTTON(ARD_BACK, KEY_BACK, 1, "back", 0),
-	GPIO_BUTTON(ARD_PROG, KEY_PROGRAM, 1, "program", 0),
-	GPIO_BUTTON(ARD_VOLUMEUP, KEY_VOLUMEUP, 1, "volume-up", 0),
-	GPIO_BUTTON(ARD_VOLUMEDOWN, KEY_VOLUMEDOWN, 1, "volume-down", 0),
-};
-
-static const struct gpio_keys_platform_data ard_button_data __initconst = {
-	.buttons        = ard_buttons,
-	.nbuttons       = ARRAY_SIZE(ard_buttons),
-};
-
-static struct resource ard_smsc911x_resources[] = {
-	{
-		.start = MX53_CS1_64MB_BASE_ADDR,
-		.end = MX53_CS1_64MB_BASE_ADDR + SZ_32M - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start =  IMX_GPIO_TO_IRQ(ARD_ETHERNET_INT_B),
-		.end =  IMX_GPIO_TO_IRQ(ARD_ETHERNET_INT_B),
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct smsc911x_platform_config ard_smsc911x_config = {
-	.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
-	.flags = SMSC911X_USE_32BIT,
-};
-
-static struct platform_device ard_smsc_lan9220_device = {
-	.name = "smsc911x",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(ard_smsc911x_resources),
-	.resource = ard_smsc911x_resources,
-	.dev = {
-		.platform_data = &ard_smsc911x_config,
-	},
-};
-
-static const struct esdhc_platform_data mx53_ard_sd1_data __initconst = {
-	.cd_gpio = ARD_SD1_CD,
-	.wp_gpio = ARD_SD1_WP,
-};
-
-static struct imxi2c_platform_data mx53_ard_i2c2_data = {
-	.bitrate = 50000,
-};
-
-static struct imxi2c_platform_data mx53_ard_i2c3_data = {
-	.bitrate = 400000,
-};
-
-static void __init mx53_ard_io_init(void)
-{
-	gpio_request(ARD_ETHERNET_INT_B, "eth-int-b");
-	gpio_direction_input(ARD_ETHERNET_INT_B);
-
-	gpio_request(ARD_I2CPORTEXP_B, "i2cptexp-rst");
-	gpio_direction_output(ARD_I2CPORTEXP_B, 1);
-}
-
-/* Config CS1 settings for ethernet controller */
-static int weim_cs_config(void)
-{
-	u32 reg;
-	void __iomem *weim_base, *iomuxc_base;
-
-	weim_base = ioremap(MX53_WEIM_BASE_ADDR, SZ_4K);
-	if (!weim_base)
-		return -ENOMEM;
-
-	iomuxc_base = ioremap(MX53_IOMUXC_BASE_ADDR, SZ_4K);
-	if (!iomuxc_base)
-		return -ENOMEM;
-
-	/* CS1 timings for LAN9220 */
-	writel(0x20001, (weim_base + 0x18));
-	writel(0x0, (weim_base + 0x1C));
-	writel(0x16000202, (weim_base + 0x20));
-	writel(0x00000002, (weim_base + 0x24));
-	writel(0x16002082, (weim_base + 0x28));
-	writel(0x00000000, (weim_base + 0x2C));
-	writel(0x00000000, (weim_base + 0x90));
-
-	/* specify 64 MB on CS1 and CS0 on GPR1 */
-	reg = readl(iomuxc_base + 0x4);
-	reg &= ~0x3F;
-	reg |= 0x1B;
-	writel(reg, (iomuxc_base + 0x4));
-
-	iounmap(iomuxc_base);
-	iounmap(weim_base);
-
-	return 0;
-}
-
-void __init imx53_ard_common_init(void)
-{
-	mxc_iomux_v3_setup_multiple_pads(mx53_ard_pads,
-					 ARRAY_SIZE(mx53_ard_pads));
-	weim_cs_config();
-}
-
-static struct platform_device *devices[] __initdata = {
-	&ard_smsc_lan9220_device,
-};
-
-static void __init mx53_ard_board_init(void)
-{
-	imx53_soc_init();
-	imx53_add_imx_uart(0, NULL);
-
-	imx53_ard_common_init();
-	mx53_ard_io_init();
-	platform_add_devices(devices, ARRAY_SIZE(devices));
-
-	imx53_add_sdhci_esdhc_imx(0, &mx53_ard_sd1_data);
-	imx53_add_imx2_wdt(0, NULL);
-	imx53_add_imx_i2c(1, &mx53_ard_i2c2_data);
-	imx53_add_imx_i2c(2, &mx53_ard_i2c3_data);
-	imx_add_gpio_keys(&ard_button_data);
-	imx53_add_ahci_imx();
-}
-
-static void __init mx53_ard_timer_init(void)
-{
-	mx53_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-static struct sys_timer mx53_ard_timer = {
-	.init	= mx53_ard_timer_init,
-};
-
-MACHINE_START(MX53_ARD, "Freescale MX53 ARD Board")
-	.map_io = mx53_map_io,
-	.init_early = imx53_init_early,
-	.init_irq = mx53_init_irq,
-	.handle_irq = imx53_handle_irq,
-	.timer = &mx53_ard_timer,
-	.init_machine = mx53_ard_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c
deleted file mode 100644
index c69413d..0000000
--- a/arch/arm/mach-mx5/board-mx53_evk.c
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2010 Yong Shen. <Yong.Shen@linaro.org>
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <mach/iomux-mx53.h>
-
-#define MX53_EVK_FEC_PHY_RST	IMX_GPIO_NR(7, 6)
-#define EVK_ECSPI1_CS0		IMX_GPIO_NR(2, 30)
-#define EVK_ECSPI1_CS1		IMX_GPIO_NR(3, 19)
-#define MX53EVK_LED		IMX_GPIO_NR(7, 7)
-
-#include "devices-imx53.h"
-
-static iomux_v3_cfg_t mx53_evk_pads[] = {
-	MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
-	MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
-
-	MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
-	MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
-	MX53_PAD_PATA_DIOR__UART2_RTS,
-	MX53_PAD_PATA_INTRQ__UART2_CTS,
-
-	MX53_PAD_PATA_CS_0__UART3_TXD_MUX,
-	MX53_PAD_PATA_CS_1__UART3_RXD_MUX,
-
-	MX53_PAD_EIM_D16__ECSPI1_SCLK,
-	MX53_PAD_EIM_D17__ECSPI1_MISO,
-	MX53_PAD_EIM_D18__ECSPI1_MOSI,
-
-	/* ecspi chip select lines */
-	MX53_PAD_EIM_EB2__GPIO2_30,
-	MX53_PAD_EIM_D19__GPIO3_19,
-	/* LED */
-	MX53_PAD_PATA_DA_1__GPIO7_7,
-};
-
-static const struct imxuart_platform_data mx53_evk_uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct gpio_led mx53evk_leds[] __initconst = {
-	{
-		.name			= "green",
-		.default_trigger	= "heartbeat",
-		.gpio			= MX53EVK_LED,
-	},
-};
-
-static const struct gpio_led_platform_data mx53evk_leds_data __initconst = {
-	.leds		= mx53evk_leds,
-	.num_leds	= ARRAY_SIZE(mx53evk_leds),
-};
-
-static inline void mx53_evk_init_uart(void)
-{
-	imx53_add_imx_uart(0, NULL);
-	imx53_add_imx_uart(1, &mx53_evk_uart_pdata);
-	imx53_add_imx_uart(2, NULL);
-}
-
-static const struct imxi2c_platform_data mx53_evk_i2c_data __initconst = {
-	.bitrate = 100000,
-};
-
-static inline void mx53_evk_fec_reset(void)
-{
-	int ret;
-
-	/* reset FEC PHY */
-	ret = gpio_request_one(MX53_EVK_FEC_PHY_RST, GPIOF_OUT_INIT_LOW,
-							"fec-phy-reset");
-	if (ret) {
-		printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
-		return;
-	}
-	msleep(1);
-	gpio_set_value(MX53_EVK_FEC_PHY_RST, 1);
-}
-
-static struct fec_platform_data mx53_evk_fec_pdata = {
-	.phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static struct spi_board_info mx53_evk_spi_board_info[] __initdata = {
-	{
-		.modalias = "mtd_dataflash",
-		.max_speed_hz = 25000000,
-		.bus_num = 0,
-		.chip_select = 1,
-		.mode = SPI_MODE_0,
-		.platform_data = NULL,
-	},
-};
-
-static int mx53_evk_spi_cs[] = {
-	EVK_ECSPI1_CS0,
-	EVK_ECSPI1_CS1,
-};
-
-static const struct spi_imx_master mx53_evk_spi_data __initconst = {
-	.chipselect     = mx53_evk_spi_cs,
-	.num_chipselect = ARRAY_SIZE(mx53_evk_spi_cs),
-};
-
-void __init imx53_evk_common_init(void)
-{
-	mxc_iomux_v3_setup_multiple_pads(mx53_evk_pads,
-					 ARRAY_SIZE(mx53_evk_pads));
-}
-
-static void __init mx53_evk_board_init(void)
-{
-	imx53_soc_init();
-	imx53_evk_common_init();
-
-	mx53_evk_init_uart();
-	mx53_evk_fec_reset();
-	imx53_add_fec(&mx53_evk_fec_pdata);
-
-	imx53_add_imx_i2c(0, &mx53_evk_i2c_data);
-	imx53_add_imx_i2c(1, &mx53_evk_i2c_data);
-
-	imx53_add_sdhci_esdhc_imx(0, NULL);
-	imx53_add_sdhci_esdhc_imx(1, NULL);
-
-	spi_register_board_info(mx53_evk_spi_board_info,
-		ARRAY_SIZE(mx53_evk_spi_board_info));
-	imx53_add_ecspi(0, &mx53_evk_spi_data);
-	imx53_add_imx2_wdt(0, NULL);
-	gpio_led_register_device(-1, &mx53evk_leds_data);
-}
-
-static void __init mx53_evk_timer_init(void)
-{
-	mx53_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-static struct sys_timer mx53_evk_timer = {
-	.init	= mx53_evk_timer_init,
-};
-
-MACHINE_START(MX53_EVK, "Freescale MX53 EVK Board")
-	.map_io = mx53_map_io,
-	.init_early = imx53_init_early,
-	.init_irq = mx53_init_irq,
-	.handle_irq = imx53_handle_irq,
-	.timer = &mx53_evk_timer,
-	.init_machine = mx53_evk_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c
deleted file mode 100644
index e64a8f7..0000000
--- a/arch/arm/mach-mx5/board-mx53_loco.c
+++ /dev/null
@@ -1,319 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx53.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx53.h"
-
-#define MX53_LOCO_POWER			IMX_GPIO_NR(1, 8)
-#define MX53_LOCO_UI1			IMX_GPIO_NR(2, 14)
-#define MX53_LOCO_UI2			IMX_GPIO_NR(2, 15)
-#define LOCO_FEC_PHY_RST		IMX_GPIO_NR(7, 6)
-#define LOCO_LED			IMX_GPIO_NR(7, 7)
-#define LOCO_SD3_CD			IMX_GPIO_NR(3, 11)
-#define LOCO_SD3_WP			IMX_GPIO_NR(3, 12)
-#define LOCO_SD1_CD			IMX_GPIO_NR(3, 13)
-#define LOCO_ACCEL_EN			IMX_GPIO_NR(6, 14)
-
-static iomux_v3_cfg_t mx53_loco_pads[] = {
-	/* FEC */
-	MX53_PAD_FEC_MDC__FEC_MDC,
-	MX53_PAD_FEC_MDIO__FEC_MDIO,
-	MX53_PAD_FEC_REF_CLK__FEC_TX_CLK,
-	MX53_PAD_FEC_RX_ER__FEC_RX_ER,
-	MX53_PAD_FEC_CRS_DV__FEC_RX_DV,
-	MX53_PAD_FEC_RXD1__FEC_RDATA_1,
-	MX53_PAD_FEC_RXD0__FEC_RDATA_0,
-	MX53_PAD_FEC_TX_EN__FEC_TX_EN,
-	MX53_PAD_FEC_TXD1__FEC_TDATA_1,
-	MX53_PAD_FEC_TXD0__FEC_TDATA_0,
-	/* FEC_nRST */
-	MX53_PAD_PATA_DA_0__GPIO7_6,
-	/* FEC_nINT */
-	MX53_PAD_PATA_DATA4__GPIO2_4,
-	/* AUDMUX5 */
-	MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC,
-	MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD,
-	MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS,
-	MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD,
-	/* I2C1 */
-	MX53_PAD_CSI0_DAT8__I2C1_SDA,
-	MX53_PAD_CSI0_DAT9__I2C1_SCL,
-	MX53_PAD_NANDF_CS1__GPIO6_14,	/* Accelerometer Enable */
-	/* I2C2 */
-	MX53_PAD_KEY_COL3__I2C2_SCL,
-	MX53_PAD_KEY_ROW3__I2C2_SDA,
-	/* SD1 */
-	MX53_PAD_SD1_CMD__ESDHC1_CMD,
-	MX53_PAD_SD1_CLK__ESDHC1_CLK,
-	MX53_PAD_SD1_DATA0__ESDHC1_DAT0,
-	MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
-	MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
-	MX53_PAD_SD1_DATA3__ESDHC1_DAT3,
-	/* SD1_CD */
-	MX53_PAD_EIM_DA13__GPIO3_13,
-	/* SD3 */
-	MX53_PAD_PATA_DATA8__ESDHC3_DAT0,
-	MX53_PAD_PATA_DATA9__ESDHC3_DAT1,
-	MX53_PAD_PATA_DATA10__ESDHC3_DAT2,
-	MX53_PAD_PATA_DATA11__ESDHC3_DAT3,
-	MX53_PAD_PATA_DATA0__ESDHC3_DAT4,
-	MX53_PAD_PATA_DATA1__ESDHC3_DAT5,
-	MX53_PAD_PATA_DATA2__ESDHC3_DAT6,
-	MX53_PAD_PATA_DATA3__ESDHC3_DAT7,
-	MX53_PAD_PATA_IORDY__ESDHC3_CLK,
-	MX53_PAD_PATA_RESET_B__ESDHC3_CMD,
-	/* SD3_CD */
-	MX53_PAD_EIM_DA11__GPIO3_11,
-	/* SD3_WP */
-	MX53_PAD_EIM_DA12__GPIO3_12,
-	/* VGA */
-	MX53_PAD_EIM_OE__IPU_DI1_PIN7,
-	MX53_PAD_EIM_RW__IPU_DI1_PIN8,
-	/* DISPLB */
-	MX53_PAD_EIM_D20__IPU_SER_DISP0_CS,
-	MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK,
-	MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN,
-	MX53_PAD_EIM_D23__IPU_DI0_D0_CS,
-	/* DISP0_POWER_EN */
-	MX53_PAD_EIM_D24__GPIO3_24,
-	/* DISP0 DET INT */
-	MX53_PAD_EIM_D31__GPIO3_31,
-	/* LVDS */
-	MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3,
-	MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK,
-	MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2,
-	MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1,
-	MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0,
-	MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3,
-	MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2,
-	MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK,
-	MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1,
-	MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0,
-	/* I2C1 */
-	MX53_PAD_CSI0_DAT8__I2C1_SDA,
-	MX53_PAD_CSI0_DAT9__I2C1_SCL,
-	/* UART1 */
-	MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
-	MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
-	/* CSI0 */
-	MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12,
-	MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13,
-	MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14,
-	MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15,
-	MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16,
-	MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17,
-	MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18,
-	MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19,
-	MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC,
-	MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC,
-	MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK,
-	/* DISPLAY */
-	MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK,
-	MX53_PAD_DI0_PIN15__IPU_DI0_PIN15,
-	MX53_PAD_DI0_PIN2__IPU_DI0_PIN2,
-	MX53_PAD_DI0_PIN3__IPU_DI0_PIN3,
-	MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0,
-	MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1,
-	MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2,
-	MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3,
-	MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4,
-	MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5,
-	MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6,
-	MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7,
-	MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8,
-	MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9,
-	MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10,
-	MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11,
-	MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12,
-	MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13,
-	MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14,
-	MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15,
-	MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16,
-	MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17,
-	MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18,
-	MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19,
-	MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20,
-	MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21,
-	MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22,
-	MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23,
-	/* Audio CLK*/
-	MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK,
-	/* PWM */
-	MX53_PAD_GPIO_1__PWM2_PWMO,
-	/* SPDIF */
-	MX53_PAD_GPIO_7__SPDIF_PLOCK,
-	MX53_PAD_GPIO_17__SPDIF_OUT1,
-	/* GPIO */
-	MX53_PAD_PATA_DA_1__GPIO7_7,		/* LED */
-	MX53_PAD_PATA_DA_2__GPIO7_8,
-	MX53_PAD_PATA_DATA5__GPIO2_5,
-	MX53_PAD_PATA_DATA6__GPIO2_6,
-	MX53_PAD_PATA_DATA14__GPIO2_14,
-	MX53_PAD_PATA_DATA15__GPIO2_15,
-	MX53_PAD_PATA_INTRQ__GPIO7_2,
-	MX53_PAD_EIM_WAIT__GPIO5_0,
-	MX53_PAD_NANDF_WP_B__GPIO6_9,
-	MX53_PAD_NANDF_RB0__GPIO6_10,
-	MX53_PAD_NANDF_CS1__GPIO6_14,
-	MX53_PAD_NANDF_CS2__GPIO6_15,
-	MX53_PAD_NANDF_CS3__GPIO6_16,
-	MX53_PAD_GPIO_5__GPIO1_5,
-	MX53_PAD_GPIO_16__GPIO7_11,
-	MX53_PAD_GPIO_8__GPIO1_8,
-};
-
-#define GPIO_BUTTON(gpio_num, ev_code, act_low, descr, wake)	\
-{								\
-	.gpio		= gpio_num,				\
-	.type		= EV_KEY,				\
-	.code		= ev_code,				\
-	.active_low	= act_low,				\
-	.desc		= "btn " descr,				\
-	.wakeup		= wake,					\
-}
-
-static struct gpio_keys_button loco_buttons[] = {
-	GPIO_BUTTON(MX53_LOCO_POWER, KEY_POWER, 1, "power", 0),
-	GPIO_BUTTON(MX53_LOCO_UI1, KEY_VOLUMEUP, 1, "volume-up", 0),
-	GPIO_BUTTON(MX53_LOCO_UI2, KEY_VOLUMEDOWN, 1, "volume-down", 0),
-};
-
-static const struct gpio_keys_platform_data loco_button_data __initconst = {
-	.buttons        = loco_buttons,
-	.nbuttons       = ARRAY_SIZE(loco_buttons),
-};
-
-static const struct esdhc_platform_data mx53_loco_sd1_data __initconst = {
-	.cd_gpio = LOCO_SD1_CD,
-	.cd_type = ESDHC_CD_GPIO,
-	.wp_type = ESDHC_WP_NONE,
-};
-
-static const struct esdhc_platform_data mx53_loco_sd3_data __initconst = {
-	.cd_gpio = LOCO_SD3_CD,
-	.wp_gpio = LOCO_SD3_WP,
-	.cd_type = ESDHC_CD_GPIO,
-	.wp_type = ESDHC_WP_GPIO,
-};
-
-static inline void mx53_loco_fec_reset(void)
-{
-	int ret;
-
-	/* reset FEC PHY */
-	ret = gpio_request(LOCO_FEC_PHY_RST, "fec-phy-reset");
-	if (ret) {
-		printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
-		return;
-	}
-	gpio_direction_output(LOCO_FEC_PHY_RST, 0);
-	msleep(1);
-	gpio_set_value(LOCO_FEC_PHY_RST, 1);
-}
-
-static struct fec_platform_data mx53_loco_fec_data = {
-	.phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static const struct imxi2c_platform_data mx53_loco_i2c_data __initconst = {
-	.bitrate = 100000,
-};
-
-static const struct gpio_led mx53loco_leds[] __initconst = {
-	{
-		.name			= "green",
-		.default_trigger	= "heartbeat",
-		.gpio			= LOCO_LED,
-	},
-};
-
-static const struct gpio_led_platform_data mx53loco_leds_data __initconst = {
-	.leds		= mx53loco_leds,
-	.num_leds	= ARRAY_SIZE(mx53loco_leds),
-};
-
-void __init imx53_qsb_common_init(void)
-{
-	mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads,
-					 ARRAY_SIZE(mx53_loco_pads));
-}
-
-static struct i2c_board_info mx53loco_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("mma8450", 0x1C),
-	},
-};
-
-static void __init mx53_loco_board_init(void)
-{
-	int ret;
-	imx53_soc_init();
-	imx53_qsb_common_init();
-
-	imx53_add_imx_uart(0, NULL);
-	mx53_loco_fec_reset();
-	imx53_add_fec(&mx53_loco_fec_data);
-	imx53_add_imx2_wdt(0, NULL);
-
-	ret = gpio_request_one(LOCO_ACCEL_EN, GPIOF_OUT_INIT_HIGH, "accel_en");
-	if (ret)
-		pr_err("Cannot request ACCEL_EN pin: %d\n", ret);
-
-	i2c_register_board_info(0, mx53loco_i2c_devices,
-				ARRAY_SIZE(mx53loco_i2c_devices));
-	imx53_add_imx_i2c(0, &mx53_loco_i2c_data);
-	imx53_add_imx_i2c(1, &mx53_loco_i2c_data);
-	imx53_add_sdhci_esdhc_imx(0, &mx53_loco_sd1_data);
-	imx53_add_sdhci_esdhc_imx(2, &mx53_loco_sd3_data);
-	imx_add_gpio_keys(&loco_button_data);
-	gpio_led_register_device(-1, &mx53loco_leds_data);
-	imx53_add_ahci_imx();
-}
-
-static void __init mx53_loco_timer_init(void)
-{
-	mx53_clocks_init(32768, 24000000, 0, 0);
-}
-
-static struct sys_timer mx53_loco_timer = {
-	.init	= mx53_loco_timer_init,
-};
-
-MACHINE_START(MX53_LOCO, "Freescale MX53 LOCO Board")
-	.map_io = mx53_map_io,
-	.init_early = imx53_init_early,
-	.init_irq = mx53_init_irq,
-	.handle_irq = imx53_handle_irq,
-	.timer = &mx53_loco_timer,
-	.init_machine = mx53_loco_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c
deleted file mode 100644
index d498573..0000000
--- a/arch/arm/mach-mx5/board-mx53_smd.c
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx53.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx53.h"
-
-#define SMD_FEC_PHY_RST		IMX_GPIO_NR(7, 6)
-#define MX53_SMD_SATA_PWR_EN    IMX_GPIO_NR(3, 3)
-
-static iomux_v3_cfg_t mx53_smd_pads[] = {
-	MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
-	MX53_PAD_CSI0_DAT11__UART1_RXD_MUX,
-
-	MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
-	MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
-
-	MX53_PAD_PATA_CS_0__UART3_TXD_MUX,
-	MX53_PAD_PATA_CS_1__UART3_RXD_MUX,
-	MX53_PAD_PATA_DA_1__UART3_CTS,
-	MX53_PAD_PATA_DA_2__UART3_RTS,
-	/* I2C1 */
-	MX53_PAD_CSI0_DAT8__I2C1_SDA,
-	MX53_PAD_CSI0_DAT9__I2C1_SCL,
-	/* SD1 */
-	MX53_PAD_SD1_CMD__ESDHC1_CMD,
-	MX53_PAD_SD1_CLK__ESDHC1_CLK,
-	MX53_PAD_SD1_DATA0__ESDHC1_DAT0,
-	MX53_PAD_SD1_DATA1__ESDHC1_DAT1,
-	MX53_PAD_SD1_DATA2__ESDHC1_DAT2,
-	MX53_PAD_SD1_DATA3__ESDHC1_DAT3,
-	/* SD2 */
-	MX53_PAD_SD2_CMD__ESDHC2_CMD,
-	MX53_PAD_SD2_CLK__ESDHC2_CLK,
-	MX53_PAD_SD2_DATA0__ESDHC2_DAT0,
-	MX53_PAD_SD2_DATA1__ESDHC2_DAT1,
-	MX53_PAD_SD2_DATA2__ESDHC2_DAT2,
-	MX53_PAD_SD2_DATA3__ESDHC2_DAT3,
-	/* SD3 */
-	MX53_PAD_PATA_DATA8__ESDHC3_DAT0,
-	MX53_PAD_PATA_DATA9__ESDHC3_DAT1,
-	MX53_PAD_PATA_DATA10__ESDHC3_DAT2,
-	MX53_PAD_PATA_DATA11__ESDHC3_DAT3,
-	MX53_PAD_PATA_DATA0__ESDHC3_DAT4,
-	MX53_PAD_PATA_DATA1__ESDHC3_DAT5,
-	MX53_PAD_PATA_DATA2__ESDHC3_DAT6,
-	MX53_PAD_PATA_DATA3__ESDHC3_DAT7,
-	MX53_PAD_PATA_IORDY__ESDHC3_CLK,
-	MX53_PAD_PATA_RESET_B__ESDHC3_CMD,
-};
-
-static const struct imxuart_platform_data mx53_smd_uart_data __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static inline void mx53_smd_init_uart(void)
-{
-	imx53_add_imx_uart(0, NULL);
-	imx53_add_imx_uart(1, NULL);
-	imx53_add_imx_uart(2, &mx53_smd_uart_data);
-}
-
-static inline void mx53_smd_fec_reset(void)
-{
-	int ret;
-
-	/* reset FEC PHY */
-	ret = gpio_request(SMD_FEC_PHY_RST, "fec-phy-reset");
-	if (ret) {
-		printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret);
-		return;
-	}
-	gpio_direction_output(SMD_FEC_PHY_RST, 0);
-	msleep(1);
-	gpio_set_value(SMD_FEC_PHY_RST, 1);
-}
-
-static struct fec_platform_data mx53_smd_fec_data = {
-	.phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static const struct imxi2c_platform_data mx53_smd_i2c_data __initconst = {
-	.bitrate = 100000,
-};
-
-static inline void mx53_smd_ahci_pwr_on(void)
-{
-	int ret;
-
-	/* Enable SATA PWR */
-	ret = gpio_request_one(MX53_SMD_SATA_PWR_EN,
-			GPIOF_DIR_OUT | GPIOF_INIT_HIGH, "ahci-sata-pwr");
-	if (ret) {
-		pr_err("failed to enable SATA_PWR_EN: %d\n", ret);
-		return;
-	}
-}
-
-void __init imx53_smd_common_init(void)
-{
-	mxc_iomux_v3_setup_multiple_pads(mx53_smd_pads,
-					 ARRAY_SIZE(mx53_smd_pads));
-}
-
-static void __init mx53_smd_board_init(void)
-{
-	imx53_soc_init();
-	imx53_smd_common_init();
-
-	mx53_smd_init_uart();
-	mx53_smd_fec_reset();
-	imx53_add_fec(&mx53_smd_fec_data);
-	imx53_add_imx2_wdt(0, NULL);
-	imx53_add_imx_i2c(0, &mx53_smd_i2c_data);
-	imx53_add_sdhci_esdhc_imx(0, NULL);
-	imx53_add_sdhci_esdhc_imx(1, NULL);
-	imx53_add_sdhci_esdhc_imx(2, NULL);
-	mx53_smd_ahci_pwr_on();
-	imx53_add_ahci_imx();
-}
-
-static void __init mx53_smd_timer_init(void)
-{
-	mx53_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-static struct sys_timer mx53_smd_timer = {
-	.init	= mx53_smd_timer_init,
-};
-
-MACHINE_START(MX53_SMD, "Freescale MX53 SMD Board")
-	.map_io = mx53_map_io,
-	.init_early = imx53_init_early,
-	.init_irq = mx53_init_irq,
-	.handle_irq = imx53_handle_irq,
-	.timer = &mx53_smd_timer,
-	.init_machine = mx53_smd_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c
deleted file mode 100644
index 2aacf41..0000000
--- a/arch/arm/mach-mx5/clock-mx51-mx53.c
+++ /dev/null
@@ -1,1673 +0,0 @@
-/*
- * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <linux/of.h>
-
-#include <asm/div64.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/clock.h>
-
-#include "crm_regs.h"
-
-/* External clock values passed-in by the board code */
-static unsigned long external_high_reference, external_low_reference;
-static unsigned long oscillator_reference, ckih2_reference;
-
-static struct clk osc_clk;
-static struct clk pll1_main_clk;
-static struct clk pll1_sw_clk;
-static struct clk pll2_sw_clk;
-static struct clk pll3_sw_clk;
-static struct clk mx53_pll4_sw_clk;
-static struct clk lp_apm_clk;
-static struct clk periph_apm_clk;
-static struct clk ahb_clk;
-static struct clk ipg_clk;
-static struct clk usboh3_clk;
-static struct clk emi_fast_clk;
-static struct clk ipu_clk;
-static struct clk mipi_hsc1_clk;
-static struct clk esdhc1_clk;
-static struct clk esdhc2_clk;
-static struct clk esdhc3_mx53_clk;
-
-#define MAX_DPLL_WAIT_TRIES	1000 /* 1000 * udelay(1) = 1ms */
-
-/* calculate best pre and post dividers to get the required divider */
-static void __calc_pre_post_dividers(u32 div, u32 *pre, u32 *post,
-	u32 max_pre, u32 max_post)
-{
-	if (div >= max_pre * max_post) {
-		*pre = max_pre;
-		*post = max_post;
-	} else if (div >= max_pre) {
-		u32 min_pre, temp_pre, old_err, err;
-		min_pre = DIV_ROUND_UP(div, max_post);
-		old_err = max_pre;
-		for (temp_pre = max_pre; temp_pre >= min_pre; temp_pre--) {
-			err = div % temp_pre;
-			if (err == 0) {
-				*pre = temp_pre;
-				break;
-			}
-			err = temp_pre - err;
-			if (err < old_err) {
-				old_err = err;
-				*pre = temp_pre;
-			}
-		}
-		*post = DIV_ROUND_UP(div, *pre);
-	} else {
-		*pre = div;
-		*post = 1;
-	}
-}
-
-static void _clk_ccgr_setclk(struct clk *clk, unsigned mode)
-{
-	u32 reg = __raw_readl(clk->enable_reg);
-
-	reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift);
-	reg |= mode << clk->enable_shift;
-
-	__raw_writel(reg, clk->enable_reg);
-}
-
-static int _clk_ccgr_enable(struct clk *clk)
-{
-	_clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_ON);
-	return 0;
-}
-
-static void _clk_ccgr_disable(struct clk *clk)
-{
-	_clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_OFF);
-}
-
-static int _clk_ccgr_enable_inrun(struct clk *clk)
-{
-	_clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_IDLE);
-	return 0;
-}
-
-static void _clk_ccgr_disable_inwait(struct clk *clk)
-{
-	_clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_IDLE);
-}
-
-/*
- * For the 4-to-1 muxed input clock
- */
-static inline u32 _get_mux(struct clk *parent, struct clk *m0,
-			   struct clk *m1, struct clk *m2, struct clk *m3)
-{
-	if (parent == m0)
-		return 0;
-	else if (parent == m1)
-		return 1;
-	else if (parent == m2)
-		return 2;
-	else if (parent == m3)
-		return 3;
-	else
-		BUG();
-
-	return -EINVAL;
-}
-
-static inline void __iomem *_mx51_get_pll_base(struct clk *pll)
-{
-	if (pll == &pll1_main_clk)
-		return MX51_DPLL1_BASE;
-	else if (pll == &pll2_sw_clk)
-		return MX51_DPLL2_BASE;
-	else if (pll == &pll3_sw_clk)
-		return MX51_DPLL3_BASE;
-	else
-		BUG();
-
-	return NULL;
-}
-
-static inline void __iomem *_mx53_get_pll_base(struct clk *pll)
-{
-	if (pll == &pll1_main_clk)
-		return MX53_DPLL1_BASE;
-	else if (pll == &pll2_sw_clk)
-		return MX53_DPLL2_BASE;
-	else if (pll == &pll3_sw_clk)
-		return MX53_DPLL3_BASE;
-	else if (pll == &mx53_pll4_sw_clk)
-		return MX53_DPLL4_BASE;
-	else
-		BUG();
-
-	return NULL;
-}
-
-static inline void __iomem *_get_pll_base(struct clk *pll)
-{
-	if (cpu_is_mx51())
-		return _mx51_get_pll_base(pll);
-	else
-		return _mx53_get_pll_base(pll);
-}
-
-static unsigned long clk_pll_get_rate(struct clk *clk)
-{
-	long mfi, mfn, mfd, pdf, ref_clk, mfn_abs;
-	unsigned long dp_op, dp_mfd, dp_mfn, dp_ctl, pll_hfsm, dbl;
-	void __iomem *pllbase;
-	s64 temp;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	pllbase = _get_pll_base(clk);
-
-	dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
-	pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
-	dbl = dp_ctl & MXC_PLL_DP_CTL_DPDCK0_2_EN;
-
-	if (pll_hfsm == 0) {
-		dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
-		dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
-		dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
-	} else {
-		dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP);
-		dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD);
-		dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN);
-	}
-	pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK;
-	mfi = (dp_op & MXC_PLL_DP_OP_MFI_MASK) >> MXC_PLL_DP_OP_MFI_OFFSET;
-	mfi = (mfi <= 5) ? 5 : mfi;
-	mfd = dp_mfd & MXC_PLL_DP_MFD_MASK;
-	mfn = mfn_abs = dp_mfn & MXC_PLL_DP_MFN_MASK;
-	/* Sign extend to 32-bits */
-	if (mfn >= 0x04000000) {
-		mfn |= 0xFC000000;
-		mfn_abs = -mfn;
-	}
-
-	ref_clk = 2 * parent_rate;
-	if (dbl != 0)
-		ref_clk *= 2;
-
-	ref_clk /= (pdf + 1);
-	temp = (u64) ref_clk * mfn_abs;
-	do_div(temp, mfd + 1);
-	if (mfn < 0)
-		temp = -temp;
-	temp = (ref_clk * mfi) + temp;
-
-	return temp;
-}
-
-static int _clk_pll_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 reg;
-	void __iomem *pllbase;
-
-	long mfi, pdf, mfn, mfd = 999999;
-	s64 temp64;
-	unsigned long quad_parent_rate;
-	unsigned long pll_hfsm, dp_ctl;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	pllbase = _get_pll_base(clk);
-
-	quad_parent_rate = 4 * parent_rate;
-	pdf = mfi = -1;
-	while (++pdf < 16 && mfi < 5)
-		mfi = rate * (pdf+1) / quad_parent_rate;
-	if (mfi > 15)
-		return -EINVAL;
-	pdf--;
-
-	temp64 = rate * (pdf+1) - quad_parent_rate * mfi;
-	do_div(temp64, quad_parent_rate/1000000);
-	mfn = (long)temp64;
-
-	dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
-	/* use dpdck0_2 */
-	__raw_writel(dp_ctl | 0x1000L, pllbase + MXC_PLL_DP_CTL);
-	pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
-	if (pll_hfsm == 0) {
-		reg = mfi << 4 | pdf;
-		__raw_writel(reg, pllbase + MXC_PLL_DP_OP);
-		__raw_writel(mfd, pllbase + MXC_PLL_DP_MFD);
-		__raw_writel(mfn, pllbase + MXC_PLL_DP_MFN);
-	} else {
-		reg = mfi << 4 | pdf;
-		__raw_writel(reg, pllbase + MXC_PLL_DP_HFS_OP);
-		__raw_writel(mfd, pllbase + MXC_PLL_DP_HFS_MFD);
-		__raw_writel(mfn, pllbase + MXC_PLL_DP_HFS_MFN);
-	}
-
-	return 0;
-}
-
-static int _clk_pll_enable(struct clk *clk)
-{
-	u32 reg;
-	void __iomem *pllbase;
-	int i = 0;
-
-	pllbase = _get_pll_base(clk);
-	reg = __raw_readl(pllbase + MXC_PLL_DP_CTL);
-	if (reg & MXC_PLL_DP_CTL_UPEN)
-		return 0;
-
-	reg |= MXC_PLL_DP_CTL_UPEN;
-	__raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
-
-	/* Wait for lock */
-	do {
-		reg = __raw_readl(pllbase + MXC_PLL_DP_CTL);
-		if (reg & MXC_PLL_DP_CTL_LRF)
-			break;
-
-		udelay(1);
-	} while (++i < MAX_DPLL_WAIT_TRIES);
-
-	if (i == MAX_DPLL_WAIT_TRIES) {
-		pr_err("MX5: pll locking failed\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static void _clk_pll_disable(struct clk *clk)
-{
-	u32 reg;
-	void __iomem *pllbase;
-
-	pllbase = _get_pll_base(clk);
-	reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) & ~MXC_PLL_DP_CTL_UPEN;
-	__raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
-}
-
-static int _clk_pll1_sw_set_parent(struct clk *clk, struct clk *parent)
-{
-	u32 reg, step;
-
-	reg = __raw_readl(MXC_CCM_CCSR);
-
-	/* When switching from pll_main_clk to a bypass clock, first select a
-	 * multiplexed clock in 'step_sel', then shift the glitchless mux
-	 * 'pll1_sw_clk_sel'.
-	 *
-	 * When switching back, do it in reverse order
-	 */
-	if (parent == &pll1_main_clk) {
-		/* Switch to pll1_main_clk */
-		reg &= ~MXC_CCM_CCSR_PLL1_SW_CLK_SEL;
-		__raw_writel(reg, MXC_CCM_CCSR);
-		/* step_clk mux switched to lp_apm, to save power. */
-		reg = __raw_readl(MXC_CCM_CCSR);
-		reg &= ~MXC_CCM_CCSR_STEP_SEL_MASK;
-		reg |= (MXC_CCM_CCSR_STEP_SEL_LP_APM <<
-				MXC_CCM_CCSR_STEP_SEL_OFFSET);
-	} else {
-		if (parent == &lp_apm_clk) {
-			step = MXC_CCM_CCSR_STEP_SEL_LP_APM;
-		} else  if (parent == &pll2_sw_clk) {
-			step = MXC_CCM_CCSR_STEP_SEL_PLL2_DIVIDED;
-		} else  if (parent == &pll3_sw_clk) {
-			step = MXC_CCM_CCSR_STEP_SEL_PLL3_DIVIDED;
-		} else
-			return -EINVAL;
-
-		reg &= ~MXC_CCM_CCSR_STEP_SEL_MASK;
-		reg |= (step << MXC_CCM_CCSR_STEP_SEL_OFFSET);
-
-		__raw_writel(reg, MXC_CCM_CCSR);
-		/* Switch to step_clk */
-		reg = __raw_readl(MXC_CCM_CCSR);
-		reg |= MXC_CCM_CCSR_PLL1_SW_CLK_SEL;
-	}
-	__raw_writel(reg, MXC_CCM_CCSR);
-	return 0;
-}
-
-static unsigned long clk_pll1_sw_get_rate(struct clk *clk)
-{
-	u32 reg, div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	reg = __raw_readl(MXC_CCM_CCSR);
-
-	if (clk->parent == &pll2_sw_clk) {
-		div = ((reg & MXC_CCM_CCSR_PLL2_PODF_MASK) >>
-		       MXC_CCM_CCSR_PLL2_PODF_OFFSET) + 1;
-	} else if (clk->parent == &pll3_sw_clk) {
-		div = ((reg & MXC_CCM_CCSR_PLL3_PODF_MASK) >>
-		       MXC_CCM_CCSR_PLL3_PODF_OFFSET) + 1;
-	} else
-		div = 1;
-	return parent_rate / div;
-}
-
-static int _clk_pll2_sw_set_parent(struct clk *clk, struct clk *parent)
-{
-	u32 reg;
-
-	reg = __raw_readl(MXC_CCM_CCSR);
-
-	if (parent == &pll2_sw_clk)
-		reg &= ~MXC_CCM_CCSR_PLL2_SW_CLK_SEL;
-	else
-		reg |= MXC_CCM_CCSR_PLL2_SW_CLK_SEL;
-
-	__raw_writel(reg, MXC_CCM_CCSR);
-	return 0;
-}
-
-static int _clk_lp_apm_set_parent(struct clk *clk, struct clk *parent)
-{
-	u32 reg;
-
-	if (parent == &osc_clk)
-		reg = __raw_readl(MXC_CCM_CCSR) & ~MXC_CCM_CCSR_LP_APM_SEL;
-	else
-		return -EINVAL;
-
-	__raw_writel(reg, MXC_CCM_CCSR);
-
-	return 0;
-}
-
-static unsigned long clk_cpu_get_rate(struct clk *clk)
-{
-	u32 cacrr, div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-	cacrr = __raw_readl(MXC_CCM_CACRR);
-	div = (cacrr & MXC_CCM_CACRR_ARM_PODF_MASK) + 1;
-
-	return parent_rate / div;
-}
-
-static int clk_cpu_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 reg, cpu_podf;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-	cpu_podf = parent_rate / rate - 1;
-	/* use post divider to change freq */
-	reg = __raw_readl(MXC_CCM_CACRR);
-	reg &= ~MXC_CCM_CACRR_ARM_PODF_MASK;
-	reg |= cpu_podf << MXC_CCM_CACRR_ARM_PODF_OFFSET;
-	__raw_writel(reg, MXC_CCM_CACRR);
-
-	return 0;
-}
-
-static int _clk_periph_apm_set_parent(struct clk *clk, struct clk *parent)
-{
-	u32 reg, mux;
-	int i = 0;
-
-	mux = _get_mux(parent, &pll1_sw_clk, &pll3_sw_clk, &lp_apm_clk, NULL);
-
-	reg = __raw_readl(MXC_CCM_CBCMR) & ~MXC_CCM_CBCMR_PERIPH_CLK_SEL_MASK;
-	reg |= mux << MXC_CCM_CBCMR_PERIPH_CLK_SEL_OFFSET;
-	__raw_writel(reg, MXC_CCM_CBCMR);
-
-	/* Wait for lock */
-	do {
-		reg = __raw_readl(MXC_CCM_CDHIPR);
-		if (!(reg &  MXC_CCM_CDHIPR_PERIPH_CLK_SEL_BUSY))
-			break;
-
-		udelay(1);
-	} while (++i < MAX_DPLL_WAIT_TRIES);
-
-	if (i == MAX_DPLL_WAIT_TRIES) {
-		pr_err("MX5: Set parent for periph_apm clock failed\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int _clk_main_bus_set_parent(struct clk *clk, struct clk *parent)
-{
-	u32 reg;
-
-	reg = __raw_readl(MXC_CCM_CBCDR);
-
-	if (parent == &pll2_sw_clk)
-		reg &= ~MXC_CCM_CBCDR_PERIPH_CLK_SEL;
-	else if (parent == &periph_apm_clk)
-		reg |= MXC_CCM_CBCDR_PERIPH_CLK_SEL;
-	else
-		return -EINVAL;
-
-	__raw_writel(reg, MXC_CCM_CBCDR);
-
-	return 0;
-}
-
-static struct clk main_bus_clk = {
-	.parent = &pll2_sw_clk,
-	.set_parent = _clk_main_bus_set_parent,
-};
-
-static unsigned long clk_ahb_get_rate(struct clk *clk)
-{
-	u32 reg, div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	reg = __raw_readl(MXC_CCM_CBCDR);
-	div = ((reg & MXC_CCM_CBCDR_AHB_PODF_MASK) >>
-	       MXC_CCM_CBCDR_AHB_PODF_OFFSET) + 1;
-	return parent_rate / div;
-}
-
-
-static int _clk_ahb_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 reg, div;
-	unsigned long parent_rate;
-	int i = 0;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-	if (div > 8 || div < 1 || ((parent_rate / div) != rate))
-		return -EINVAL;
-
-	reg = __raw_readl(MXC_CCM_CBCDR);
-	reg &= ~MXC_CCM_CBCDR_AHB_PODF_MASK;
-	reg |= (div - 1) << MXC_CCM_CBCDR_AHB_PODF_OFFSET;
-	__raw_writel(reg, MXC_CCM_CBCDR);
-
-	/* Wait for lock */
-	do {
-		reg = __raw_readl(MXC_CCM_CDHIPR);
-		if (!(reg & MXC_CCM_CDHIPR_AHB_PODF_BUSY))
-			break;
-
-		udelay(1);
-	} while (++i < MAX_DPLL_WAIT_TRIES);
-
-	if (i == MAX_DPLL_WAIT_TRIES) {
-		pr_err("MX5: clk_ahb_set_rate failed\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static unsigned long _clk_ahb_round_rate(struct clk *clk,
-						unsigned long rate)
-{
-	u32 div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-	if (div > 8)
-		div = 8;
-	else if (div == 0)
-		div++;
-	return parent_rate / div;
-}
-
-
-static int _clk_max_enable(struct clk *clk)
-{
-	u32 reg;
-
-	_clk_ccgr_enable(clk);
-
-	/* Handshake with MAX when LPM is entered. */
-	reg = __raw_readl(MXC_CCM_CLPCR);
-	if (cpu_is_mx51())
-		reg &= ~MX51_CCM_CLPCR_BYPASS_MAX_LPM_HS;
-	else if (cpu_is_mx53())
-		reg &= ~MX53_CCM_CLPCR_BYPASS_MAX_LPM_HS;
-	__raw_writel(reg, MXC_CCM_CLPCR);
-
-	return 0;
-}
-
-static void _clk_max_disable(struct clk *clk)
-{
-	u32 reg;
-
-	_clk_ccgr_disable_inwait(clk);
-
-	/* No Handshake with MAX when LPM is entered as its disabled. */
-	reg = __raw_readl(MXC_CCM_CLPCR);
-	if (cpu_is_mx51())
-		reg |= MX51_CCM_CLPCR_BYPASS_MAX_LPM_HS;
-	else if (cpu_is_mx53())
-		reg &= ~MX53_CCM_CLPCR_BYPASS_MAX_LPM_HS;
-	__raw_writel(reg, MXC_CCM_CLPCR);
-}
-
-static unsigned long clk_ipg_get_rate(struct clk *clk)
-{
-	u32 reg, div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	reg = __raw_readl(MXC_CCM_CBCDR);
-	div = ((reg & MXC_CCM_CBCDR_IPG_PODF_MASK) >>
-	       MXC_CCM_CBCDR_IPG_PODF_OFFSET) + 1;
-
-	return parent_rate / div;
-}
-
-static unsigned long clk_ipg_per_get_rate(struct clk *clk)
-{
-	u32 reg, prediv1, prediv2, podf;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	if (clk->parent == &main_bus_clk || clk->parent == &lp_apm_clk) {
-		/* the main_bus_clk is the one before the DVFS engine */
-		reg = __raw_readl(MXC_CCM_CBCDR);
-		prediv1 = ((reg & MXC_CCM_CBCDR_PERCLK_PRED1_MASK) >>
-			   MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET) + 1;
-		prediv2 = ((reg & MXC_CCM_CBCDR_PERCLK_PRED2_MASK) >>
-			   MXC_CCM_CBCDR_PERCLK_PRED2_OFFSET) + 1;
-		podf = ((reg & MXC_CCM_CBCDR_PERCLK_PODF_MASK) >>
-			MXC_CCM_CBCDR_PERCLK_PODF_OFFSET) + 1;
-		return parent_rate / (prediv1 * prediv2 * podf);
-	} else if (clk->parent == &ipg_clk)
-		return parent_rate;
-	else
-		BUG();
-}
-
-static int _clk_ipg_per_set_parent(struct clk *clk, struct clk *parent)
-{
-	u32 reg;
-
-	reg = __raw_readl(MXC_CCM_CBCMR);
-
-	reg &= ~MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL;
-	reg &= ~MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL;
-
-	if (parent == &ipg_clk)
-		reg |= MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL;
-	else if (parent == &lp_apm_clk)
-		reg |= MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL;
-	else if (parent != &main_bus_clk)
-		return -EINVAL;
-
-	__raw_writel(reg, MXC_CCM_CBCMR);
-
-	return 0;
-}
-
-#define clk_nfc_set_parent	NULL
-
-static unsigned long clk_nfc_get_rate(struct clk *clk)
-{
-	unsigned long rate;
-	u32 reg, div;
-
-	reg = __raw_readl(MXC_CCM_CBCDR);
-	div = ((reg & MXC_CCM_CBCDR_NFC_PODF_MASK) >>
-	       MXC_CCM_CBCDR_NFC_PODF_OFFSET) + 1;
-	rate = clk_get_rate(clk->parent) / div;
-	WARN_ON(rate == 0);
-	return rate;
-}
-
-static unsigned long clk_nfc_round_rate(struct clk *clk,
-						unsigned long rate)
-{
-	u32 div;
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-
-	if (!rate)
-		return -EINVAL;
-
-	div = parent_rate / rate;
-
-	if (parent_rate % rate)
-		div++;
-
-	if (div > 8)
-		return -EINVAL;
-
-	return parent_rate / div;
-
-}
-
-static int clk_nfc_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 reg, div;
-
-	div = clk_get_rate(clk->parent) / rate;
-	if (div == 0)
-		div++;
-	if (((clk_get_rate(clk->parent) / div) != rate) || (div > 8))
-		return -EINVAL;
-
-	reg = __raw_readl(MXC_CCM_CBCDR);
-	reg &= ~MXC_CCM_CBCDR_NFC_PODF_MASK;
-	reg |= (div - 1) << MXC_CCM_CBCDR_NFC_PODF_OFFSET;
-	__raw_writel(reg, MXC_CCM_CBCDR);
-
-	while (__raw_readl(MXC_CCM_CDHIPR) &
-			MXC_CCM_CDHIPR_NFC_IPG_INT_MEM_PODF_BUSY){
-	}
-
-	return 0;
-}
-
-static unsigned long get_high_reference_clock_rate(struct clk *clk)
-{
-	return external_high_reference;
-}
-
-static unsigned long get_low_reference_clock_rate(struct clk *clk)
-{
-	return external_low_reference;
-}
-
-static unsigned long get_oscillator_reference_clock_rate(struct clk *clk)
-{
-	return oscillator_reference;
-}
-
-static unsigned long get_ckih2_reference_clock_rate(struct clk *clk)
-{
-	return ckih2_reference;
-}
-
-static unsigned long clk_emi_slow_get_rate(struct clk *clk)
-{
-	u32 reg, div;
-
-	reg = __raw_readl(MXC_CCM_CBCDR);
-	div = ((reg & MXC_CCM_CBCDR_EMI_PODF_MASK) >>
-	       MXC_CCM_CBCDR_EMI_PODF_OFFSET) + 1;
-
-	return clk_get_rate(clk->parent) / div;
-}
-
-static unsigned long _clk_ddr_hf_get_rate(struct clk *clk)
-{
-	unsigned long rate;
-	u32 reg, div;
-
-	reg = __raw_readl(MXC_CCM_CBCDR);
-	div = ((reg & MXC_CCM_CBCDR_DDR_PODF_MASK) >>
-		MXC_CCM_CBCDR_DDR_PODF_OFFSET) + 1;
-	rate = clk_get_rate(clk->parent) / div;
-
-	return rate;
-}
-
-/* External high frequency clock */
-static struct clk ckih_clk = {
-	.get_rate = get_high_reference_clock_rate,
-};
-
-static struct clk ckih2_clk = {
-	.get_rate = get_ckih2_reference_clock_rate,
-};
-
-static struct clk osc_clk = {
-	.get_rate = get_oscillator_reference_clock_rate,
-};
-
-/* External low frequency (32kHz) clock */
-static struct clk ckil_clk = {
-	.get_rate = get_low_reference_clock_rate,
-};
-
-static struct clk pll1_main_clk = {
-	.parent = &osc_clk,
-	.get_rate = clk_pll_get_rate,
-	.enable = _clk_pll_enable,
-	.disable = _clk_pll_disable,
-};
-
-/* Clock tree block diagram (WIP):
- * 	CCM: Clock Controller Module
- *
- * PLL output -> |
- *               | CCM Switcher -> CCM_CLK_ROOT_GEN ->
- * PLL bypass -> |
- *
- */
-
-/* PLL1 SW supplies to ARM core */
-static struct clk pll1_sw_clk = {
-	.parent = &pll1_main_clk,
-	.set_parent = _clk_pll1_sw_set_parent,
-	.get_rate = clk_pll1_sw_get_rate,
-};
-
-/* PLL2 SW supplies to AXI/AHB/IP buses */
-static struct clk pll2_sw_clk = {
-	.parent = &osc_clk,
-	.get_rate = clk_pll_get_rate,
-	.set_rate = _clk_pll_set_rate,
-	.set_parent = _clk_pll2_sw_set_parent,
-	.enable = _clk_pll_enable,
-	.disable = _clk_pll_disable,
-};
-
-/* PLL3 SW supplies to serial clocks like USB, SSI, etc. */
-static struct clk pll3_sw_clk = {
-	.parent = &osc_clk,
-	.set_rate = _clk_pll_set_rate,
-	.get_rate = clk_pll_get_rate,
-	.enable = _clk_pll_enable,
-	.disable = _clk_pll_disable,
-};
-
-/* PLL4 SW supplies to LVDS Display Bridge(LDB) */
-static struct clk mx53_pll4_sw_clk = {
-	.parent = &osc_clk,
-	.set_rate = _clk_pll_set_rate,
-	.enable = _clk_pll_enable,
-	.disable = _clk_pll_disable,
-};
-
-/* Low-power Audio Playback Mode clock */
-static struct clk lp_apm_clk = {
-	.parent = &osc_clk,
-	.set_parent = _clk_lp_apm_set_parent,
-};
-
-static struct clk periph_apm_clk = {
-	.parent = &pll1_sw_clk,
-	.set_parent = _clk_periph_apm_set_parent,
-};
-
-static struct clk cpu_clk = {
-	.parent = &pll1_sw_clk,
-	.get_rate = clk_cpu_get_rate,
-	.set_rate = clk_cpu_set_rate,
-};
-
-static struct clk ahb_clk = {
-	.parent = &main_bus_clk,
-	.get_rate = clk_ahb_get_rate,
-	.set_rate = _clk_ahb_set_rate,
-	.round_rate = _clk_ahb_round_rate,
-};
-
-static struct clk iim_clk = {
-	.parent = &ipg_clk,
-	.enable_reg = MXC_CCM_CCGR0,
-	.enable_shift = MXC_CCM_CCGRx_CG15_OFFSET,
-};
-
-/* Main IP interface clock for access to registers */
-static struct clk ipg_clk = {
-	.parent = &ahb_clk,
-	.get_rate = clk_ipg_get_rate,
-};
-
-static struct clk ipg_perclk = {
-	.parent = &lp_apm_clk,
-	.get_rate = clk_ipg_per_get_rate,
-	.set_parent = _clk_ipg_per_set_parent,
-};
-
-static struct clk ahb_max_clk = {
-	.parent = &ahb_clk,
-	.enable_reg = MXC_CCM_CCGR0,
-	.enable_shift = MXC_CCM_CCGRx_CG14_OFFSET,
-	.enable = _clk_max_enable,
-	.disable = _clk_max_disable,
-};
-
-static struct clk aips_tz1_clk = {
-	.parent = &ahb_clk,
-	.secondary = &ahb_max_clk,
-	.enable_reg = MXC_CCM_CCGR0,
-	.enable_shift = MXC_CCM_CCGRx_CG12_OFFSET,
-	.enable = _clk_ccgr_enable,
-	.disable = _clk_ccgr_disable_inwait,
-};
-
-static struct clk aips_tz2_clk = {
-	.parent = &ahb_clk,
-	.secondary = &ahb_max_clk,
-	.enable_reg = MXC_CCM_CCGR0,
-	.enable_shift = MXC_CCM_CCGRx_CG13_OFFSET,
-	.enable = _clk_ccgr_enable,
-	.disable = _clk_ccgr_disable_inwait,
-};
-
-static struct clk gpc_dvfs_clk = {
-	.enable_reg = MXC_CCM_CCGR5,
-	.enable_shift = MXC_CCM_CCGRx_CG12_OFFSET,
-	.enable = _clk_ccgr_enable,
-	.disable = _clk_ccgr_disable,
-};
-
-static struct clk gpt_32k_clk = {
-	.id = 0,
-	.parent = &ckil_clk,
-};
-
-static struct clk dummy_clk = {
-	.id = 0,
-};
-
-static struct clk emi_slow_clk = {
-	.parent = &pll2_sw_clk,
-	.enable_reg = MXC_CCM_CCGR5,
-	.enable_shift = MXC_CCM_CCGRx_CG8_OFFSET,
-	.enable = _clk_ccgr_enable,
-	.disable = _clk_ccgr_disable_inwait,
-	.get_rate = clk_emi_slow_get_rate,
-};
-
-static int clk_ipu_enable(struct clk *clk)
-{
-	u32 reg;
-
-	_clk_ccgr_enable(clk);
-
-	/* Enable handshake with IPU when certain clock rates are changed */
-	reg = __raw_readl(MXC_CCM_CCDR);
-	reg &= ~MXC_CCM_CCDR_IPU_HS_MASK;
-	__raw_writel(reg, MXC_CCM_CCDR);
-
-	/* Enable handshake with IPU when LPM is entered */
-	reg = __raw_readl(MXC_CCM_CLPCR);
-	reg &= ~MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS;
-	__raw_writel(reg, MXC_CCM_CLPCR);
-
-	return 0;
-}
-
-static void clk_ipu_disable(struct clk *clk)
-{
-	u32 reg;
-
-	_clk_ccgr_disable(clk);
-
-	/* Disable handshake with IPU whe dividers are changed */
-	reg = __raw_readl(MXC_CCM_CCDR);
-	reg |= MXC_CCM_CCDR_IPU_HS_MASK;
-	__raw_writel(reg, MXC_CCM_CCDR);
-
-	/* Disable handshake with IPU when LPM is entered */
-	reg = __raw_readl(MXC_CCM_CLPCR);
-	reg |= MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS;
-	__raw_writel(reg, MXC_CCM_CLPCR);
-}
-
-static struct clk ahbmux1_clk = {
-	.parent = &ahb_clk,
-	.secondary = &ahb_max_clk,
-	.enable_reg = MXC_CCM_CCGR0,
-	.enable_shift = MXC_CCM_CCGRx_CG8_OFFSET,
-	.enable = _clk_ccgr_enable,
-	.disable = _clk_ccgr_disable_inwait,
-};
-
-static struct clk ipu_sec_clk = {
-	.parent = &emi_fast_clk,
-	.secondary = &ahbmux1_clk,
-};
-
-static struct clk ddr_hf_clk = {
-	.parent = &pll1_sw_clk,
-	.get_rate = _clk_ddr_hf_get_rate,
-};
-
-static struct clk ddr_clk = {
-	.parent = &ddr_hf_clk,
-};
-
-/* clock definitions for MIPI HSC unit which has been removed
- * from documentation, but not from hardware
- */
-static int _clk_hsc_enable(struct clk *clk)
-{
-	u32 reg;
-
-	_clk_ccgr_enable(clk);
-	/* Handshake with IPU when certain clock rates are changed. */
-	reg = __raw_readl(MXC_CCM_CCDR);
-	reg &= ~MXC_CCM_CCDR_HSC_HS_MASK;
-	__raw_writel(reg, MXC_CCM_CCDR);
-
-	reg = __raw_readl(MXC_CCM_CLPCR);
-	reg &= ~MXC_CCM_CLPCR_BYPASS_HSC_LPM_HS;
-	__raw_writel(reg, MXC_CCM_CLPCR);
-
-	return 0;
-}
-
-static void _clk_hsc_disable(struct clk *clk)
-{
-	u32 reg;
-
-	_clk_ccgr_disable(clk);
-	/* No handshake with HSC as its not enabled. */
-	reg = __raw_readl(MXC_CCM_CCDR);
-	reg |= MXC_CCM_CCDR_HSC_HS_MASK;
-	__raw_writel(reg, MXC_CCM_CCDR);
-
-	reg = __raw_readl(MXC_CCM_CLPCR);
-	reg |= MXC_CCM_CLPCR_BYPASS_HSC_LPM_HS;
-	__raw_writel(reg, MXC_CCM_CLPCR);
-}
-
-static struct clk mipi_hsp_clk = {
-	.parent = &ipu_clk,
-	.enable_reg = MXC_CCM_CCGR4,
-	.enable_shift = MXC_CCM_CCGRx_CG6_OFFSET,
-	.enable = _clk_hsc_enable,
-	.disable = _clk_hsc_disable,
-	.secondary = &mipi_hsc1_clk,
-};
-
-#define DEFINE_CLOCK_CCGR(name, i, er, es, pfx, p, s)	\
-	static struct clk name = {			\
-		.id		= i,			\
-		.enable_reg	= er,			\
-		.enable_shift	= es,			\
-		.get_rate	= pfx##_get_rate,	\
-		.set_rate	= pfx##_set_rate,	\
-		.round_rate	= pfx##_round_rate,	\
-		.set_parent	= pfx##_set_parent,	\
-		.enable		= _clk_ccgr_enable,	\
-		.disable	= _clk_ccgr_disable,	\
-		.parent		= p,			\
-		.secondary	= s,			\
-	}
-
-#define DEFINE_CLOCK_MAX(name, i, er, es, pfx, p, s)	\
-	static struct clk name = {			\
-		.id		= i,			\
-		.enable_reg	= er,			\
-		.enable_shift	= es,			\
-		.get_rate	= pfx##_get_rate,	\
-		.set_rate	= pfx##_set_rate,	\
-		.set_parent	= pfx##_set_parent,	\
-		.enable		= _clk_max_enable,	\
-		.disable	= _clk_max_disable,	\
-		.parent		= p,			\
-		.secondary	= s,			\
-	}
-
-#define CLK_GET_RATE(name, nr, bitsname)				\
-static unsigned long clk_##name##_get_rate(struct clk *clk)		\
-{									\
-	u32 reg, pred, podf;						\
-									\
-	reg = __raw_readl(MXC_CCM_CSCDR##nr);				\
-	pred = (reg & MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_MASK)	\
-		>> MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_OFFSET;	\
-	podf = (reg & MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_MASK)	\
-		>> MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_OFFSET;	\
-									\
-	return DIV_ROUND_CLOSEST(clk_get_rate(clk->parent),		\
-			(pred + 1) * (podf + 1));			\
-}
-
-#define CLK_SET_PARENT(name, nr, bitsname)				\
-static int clk_##name##_set_parent(struct clk *clk, struct clk *parent)	\
-{									\
-	u32 reg, mux;							\
-									\
-	mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk,		\
-			&pll3_sw_clk, &lp_apm_clk);			\
-	reg = __raw_readl(MXC_CCM_CSCMR##nr) &				\
-		~MXC_CCM_CSCMR##nr##_##bitsname##_CLK_SEL_MASK;		\
-	reg |= mux << MXC_CCM_CSCMR##nr##_##bitsname##_CLK_SEL_OFFSET;	\
-	__raw_writel(reg, MXC_CCM_CSCMR##nr);				\
-									\
-	return 0;							\
-}
-
-#define CLK_SET_RATE(name, nr, bitsname)				\
-static int clk_##name##_set_rate(struct clk *clk, unsigned long rate)	\
-{									\
-	u32 reg, div, parent_rate;					\
-	u32 pre = 0, post = 0;						\
-									\
-	parent_rate = clk_get_rate(clk->parent);			\
-	div = parent_rate / rate;					\
-									\
-	if ((parent_rate / div) != rate)				\
-		return -EINVAL;						\
-									\
-	__calc_pre_post_dividers(div, &pre, &post,			\
-		(MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_MASK >>	\
-		MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_OFFSET) + 1,	\
-		(MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_MASK >>	\
-		MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_OFFSET) + 1);\
-									\
-	/* Set sdhc1 clock divider */					\
-	reg = __raw_readl(MXC_CCM_CSCDR##nr) &				\
-		~(MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_MASK	\
-		| MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_MASK);	\
-	reg |= (post - 1) <<						\
-		MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_OFFSET;	\
-	reg |= (pre - 1) <<						\
-		MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_OFFSET;	\
-	__raw_writel(reg, MXC_CCM_CSCDR##nr);				\
-									\
-	return 0;							\
-}
-
-/* UART */
-CLK_GET_RATE(uart, 1, UART)
-CLK_SET_PARENT(uart, 1, UART)
-
-static struct clk uart_root_clk = {
-	.parent = &pll2_sw_clk,
-	.get_rate = clk_uart_get_rate,
-	.set_parent = clk_uart_set_parent,
-};
-
-/* USBOH3 */
-CLK_GET_RATE(usboh3, 1, USBOH3)
-CLK_SET_PARENT(usboh3, 1, USBOH3)
-
-static struct clk usboh3_clk = {
-	.parent = &pll2_sw_clk,
-	.get_rate = clk_usboh3_get_rate,
-	.set_parent = clk_usboh3_set_parent,
-	.enable = _clk_ccgr_enable,
-	.disable = _clk_ccgr_disable,
-	.enable_reg = MXC_CCM_CCGR2,
-	.enable_shift = MXC_CCM_CCGRx_CG14_OFFSET,
-};
-
-static struct clk usb_ahb_clk = {
-	.parent = &ipg_clk,
-	.enable = _clk_ccgr_enable,
-	.disable = _clk_ccgr_disable,
-	.enable_reg = MXC_CCM_CCGR2,
-	.enable_shift = MXC_CCM_CCGRx_CG13_OFFSET,
-};
-
-static int clk_usb_phy1_set_parent(struct clk *clk, struct clk *parent)
-{
-	u32 reg;
-
-	reg = __raw_readl(MXC_CCM_CSCMR1) & ~MXC_CCM_CSCMR1_USB_PHY_CLK_SEL;
-
-	if (parent == &pll3_sw_clk)
-		reg |= 1 << MXC_CCM_CSCMR1_USB_PHY_CLK_SEL_OFFSET;
-
-	__raw_writel(reg, MXC_CCM_CSCMR1);
-
-	return 0;
-}
-
-static struct clk usb_phy1_clk = {
-	.parent = &pll3_sw_clk,
-	.set_parent = clk_usb_phy1_set_parent,
-	.enable = _clk_ccgr_enable,
-	.enable_reg = MXC_CCM_CCGR2,
-	.enable_shift = MXC_CCM_CCGRx_CG0_OFFSET,
-	.disable = _clk_ccgr_disable,
-};
-
-/* eCSPI */
-CLK_GET_RATE(ecspi, 2, CSPI)
-CLK_SET_PARENT(ecspi, 1, CSPI)
-
-static struct clk ecspi_main_clk = {
-	.parent = &pll3_sw_clk,
-	.get_rate = clk_ecspi_get_rate,
-	.set_parent = clk_ecspi_set_parent,
-};
-
-/* eSDHC */
-CLK_GET_RATE(esdhc1, 1, ESDHC1_MSHC1)
-CLK_SET_PARENT(esdhc1, 1, ESDHC1_MSHC1)
-CLK_SET_RATE(esdhc1, 1, ESDHC1_MSHC1)
-
-/* mx51 specific */
-CLK_GET_RATE(esdhc2, 1, ESDHC2_MSHC2)
-CLK_SET_PARENT(esdhc2, 1, ESDHC2_MSHC2)
-CLK_SET_RATE(esdhc2, 1, ESDHC2_MSHC2)
-
-static int clk_esdhc3_set_parent(struct clk *clk, struct clk *parent)
-{
-	u32 reg;
-
-	reg = __raw_readl(MXC_CCM_CSCMR1);
-	if (parent == &esdhc1_clk)
-		reg &= ~MXC_CCM_CSCMR1_ESDHC3_CLK_SEL;
-	else if (parent == &esdhc2_clk)
-		reg |= MXC_CCM_CSCMR1_ESDHC3_CLK_SEL;
-	else
-		return -EINVAL;
-	__raw_writel(reg, MXC_CCM_CSCMR1);
-
-	return 0;
-}
-
-static int clk_esdhc4_set_parent(struct clk *clk, struct clk *parent)
-{
-	u32 reg;
-
-	reg = __raw_readl(MXC_CCM_CSCMR1);
-	if (parent == &esdhc1_clk)
-		reg &= ~MXC_CCM_CSCMR1_ESDHC4_CLK_SEL;
-	else if (parent == &esdhc2_clk)
-		reg |= MXC_CCM_CSCMR1_ESDHC4_CLK_SEL;
-	else
-		return -EINVAL;
-	__raw_writel(reg, MXC_CCM_CSCMR1);
-
-	return 0;
-}
-
-/* mx53 specific */
-static int clk_esdhc2_mx53_set_parent(struct clk *clk, struct clk *parent)
-{
-	u32 reg;
-
-	reg = __raw_readl(MXC_CCM_CSCMR1);
-	if (parent == &esdhc1_clk)
-		reg &= ~MXC_CCM_CSCMR1_ESDHC2_MSHC2_MX53_CLK_SEL;
-	else if (parent == &esdhc3_mx53_clk)
-		reg |= MXC_CCM_CSCMR1_ESDHC2_MSHC2_MX53_CLK_SEL;
-	else
-		return -EINVAL;
-	__raw_writel(reg, MXC_CCM_CSCMR1);
-
-	return 0;
-}
-
-CLK_GET_RATE(esdhc3_mx53, 1, ESDHC3_MX53)
-CLK_SET_PARENT(esdhc3_mx53, 1, ESDHC3_MX53)
-CLK_SET_RATE(esdhc3_mx53, 1, ESDHC3_MX53)
-
-static int clk_esdhc4_mx53_set_parent(struct clk *clk, struct clk *parent)
-{
-	u32 reg;
-
-	reg = __raw_readl(MXC_CCM_CSCMR1);
-	if (parent == &esdhc1_clk)
-		reg &= ~MXC_CCM_CSCMR1_ESDHC4_CLK_SEL;
-	else if (parent == &esdhc3_mx53_clk)
-		reg |= MXC_CCM_CSCMR1_ESDHC4_CLK_SEL;
-	else
-		return -EINVAL;
-	__raw_writel(reg, MXC_CCM_CSCMR1);
-
-	return 0;
-}
-
-#define DEFINE_CLOCK_FULL(name, i, er, es, gr, sr, e, d, p, s)		\
-	static struct clk name = {					\
-		.id		= i,					\
-		.enable_reg	= er,					\
-		.enable_shift	= es,					\
-		.get_rate	= gr,					\
-		.set_rate	= sr,					\
-		.enable		= e,					\
-		.disable	= d,					\
-		.parent		= p,					\
-		.secondary	= s,					\
-	}
-
-#define DEFINE_CLOCK(name, i, er, es, gr, sr, p, s)			\
-	DEFINE_CLOCK_FULL(name, i, er, es, gr, sr, _clk_ccgr_enable, _clk_ccgr_disable, p, s)
-
-/* Shared peripheral bus arbiter */
-DEFINE_CLOCK(spba_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG0_OFFSET,
-	NULL,  NULL, &ipg_clk, NULL);
-
-/* UART */
-DEFINE_CLOCK(uart1_ipg_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG3_OFFSET,
-	NULL,  NULL, &ipg_clk, &aips_tz1_clk);
-DEFINE_CLOCK(uart2_ipg_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG5_OFFSET,
-	NULL,  NULL, &ipg_clk, &aips_tz1_clk);
-DEFINE_CLOCK(uart3_ipg_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG7_OFFSET,
-	NULL,  NULL, &ipg_clk, &spba_clk);
-DEFINE_CLOCK(uart4_ipg_clk, 3, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG4_OFFSET,
-	NULL,  NULL, &ipg_clk, &spba_clk);
-DEFINE_CLOCK(uart5_ipg_clk, 4, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG6_OFFSET,
-	NULL,  NULL, &ipg_clk, &spba_clk);
-DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG4_OFFSET,
-	NULL,  NULL, &uart_root_clk, &uart1_ipg_clk);
-DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG6_OFFSET,
-	NULL,  NULL, &uart_root_clk, &uart2_ipg_clk);
-DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG8_OFFSET,
-	NULL,  NULL, &uart_root_clk, &uart3_ipg_clk);
-DEFINE_CLOCK(uart4_clk, 3, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG5_OFFSET,
-	NULL,  NULL, &uart_root_clk, &uart4_ipg_clk);
-DEFINE_CLOCK(uart5_clk, 4, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG7_OFFSET,
-	NULL,  NULL, &uart_root_clk, &uart5_ipg_clk);
-
-/* GPT */
-DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET,
-	NULL,  NULL, &ipg_clk, NULL);
-DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET,
-	NULL,  NULL, &ipg_clk, &gpt_ipg_clk);
-
-DEFINE_CLOCK(pwm1_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG6_OFFSET,
-	NULL, NULL, &ipg_clk, NULL);
-DEFINE_CLOCK(pwm2_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG8_OFFSET,
-	NULL, NULL, &ipg_clk, NULL);
-
-/* I2C */
-DEFINE_CLOCK(i2c1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG9_OFFSET,
-	NULL, NULL, &ipg_perclk, NULL);
-DEFINE_CLOCK(i2c2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG10_OFFSET,
-	NULL, NULL, &ipg_perclk, NULL);
-DEFINE_CLOCK(hsi2c_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG11_OFFSET,
-	NULL, NULL, &ipg_clk, NULL);
-DEFINE_CLOCK(i2c3_mx53_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG11_OFFSET,
-	NULL, NULL, &ipg_perclk, NULL);
-
-/* FEC */
-DEFINE_CLOCK(fec_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG12_OFFSET,
-	NULL,  NULL, &ipg_clk, NULL);
-
-/* NFC */
-DEFINE_CLOCK_CCGR(nfc_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG10_OFFSET,
-	clk_nfc, &emi_slow_clk, NULL);
-
-/* SSI */
-DEFINE_CLOCK(ssi1_ipg_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG8_OFFSET,
-	NULL, NULL, &ipg_clk, NULL);
-DEFINE_CLOCK(ssi1_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG9_OFFSET,
-	NULL, NULL, &pll3_sw_clk, &ssi1_ipg_clk);
-DEFINE_CLOCK(ssi2_ipg_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG10_OFFSET,
-	NULL, NULL, &ipg_clk, NULL);
-DEFINE_CLOCK(ssi2_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG11_OFFSET,
-	NULL, NULL, &pll3_sw_clk, &ssi2_ipg_clk);
-DEFINE_CLOCK(ssi3_ipg_clk, 2, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG12_OFFSET,
-	NULL, NULL, &ipg_clk, NULL);
-DEFINE_CLOCK(ssi3_clk, 2, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG13_OFFSET,
-	NULL, NULL, &pll3_sw_clk, &ssi3_ipg_clk);
-
-/* eCSPI */
-DEFINE_CLOCK_FULL(ecspi1_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG9_OFFSET,
-		NULL, NULL, _clk_ccgr_enable_inrun, _clk_ccgr_disable,
-		&ipg_clk, &spba_clk);
-DEFINE_CLOCK(ecspi1_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG10_OFFSET,
-		NULL, NULL, &ecspi_main_clk, &ecspi1_ipg_clk);
-DEFINE_CLOCK_FULL(ecspi2_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG11_OFFSET,
-		NULL, NULL, _clk_ccgr_enable_inrun, _clk_ccgr_disable,
-		&ipg_clk, &aips_tz2_clk);
-DEFINE_CLOCK(ecspi2_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG12_OFFSET,
-		NULL, NULL, &ecspi_main_clk, &ecspi2_ipg_clk);
-
-/* CSPI */
-DEFINE_CLOCK(cspi_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG9_OFFSET,
-		NULL, NULL, &ipg_clk, &aips_tz2_clk);
-DEFINE_CLOCK(cspi_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG13_OFFSET,
-		NULL, NULL, &ipg_clk, &cspi_ipg_clk);
-
-/* SDMA */
-DEFINE_CLOCK(sdma_clk, 1, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG15_OFFSET,
-		NULL, NULL, &ahb_clk, NULL);
-
-/* eSDHC */
-DEFINE_CLOCK_FULL(esdhc1_ipg_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG0_OFFSET,
-	NULL,  NULL, _clk_max_enable, _clk_max_disable, &ipg_clk, NULL);
-DEFINE_CLOCK_MAX(esdhc1_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG1_OFFSET,
-	clk_esdhc1, &pll2_sw_clk, &esdhc1_ipg_clk);
-DEFINE_CLOCK_FULL(esdhc2_ipg_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG2_OFFSET,
-	NULL,  NULL, _clk_max_enable, _clk_max_disable, &ipg_clk, NULL);
-DEFINE_CLOCK_FULL(esdhc3_ipg_clk, 2, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG4_OFFSET,
-	NULL,  NULL, _clk_max_enable, _clk_max_disable, &ipg_clk, NULL);
-DEFINE_CLOCK_FULL(esdhc4_ipg_clk, 3, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG6_OFFSET,
-	NULL,  NULL, _clk_max_enable, _clk_max_disable, &ipg_clk, NULL);
-
-/* mx51 specific */
-DEFINE_CLOCK_MAX(esdhc2_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG3_OFFSET,
-	clk_esdhc2, &pll2_sw_clk, &esdhc2_ipg_clk);
-
-static struct clk esdhc3_clk = {
-	.id = 2,
-	.parent = &esdhc1_clk,
-	.set_parent = clk_esdhc3_set_parent,
-	.enable_reg = MXC_CCM_CCGR3,
-	.enable_shift = MXC_CCM_CCGRx_CG5_OFFSET,
-	.enable  = _clk_max_enable,
-	.disable = _clk_max_disable,
-	.secondary = &esdhc3_ipg_clk,
-};
-static struct clk esdhc4_clk = {
-	.id = 3,
-	.parent = &esdhc1_clk,
-	.set_parent = clk_esdhc4_set_parent,
-	.enable_reg = MXC_CCM_CCGR3,
-	.enable_shift = MXC_CCM_CCGRx_CG7_OFFSET,
-	.enable  = _clk_max_enable,
-	.disable = _clk_max_disable,
-	.secondary = &esdhc4_ipg_clk,
-};
-
-/* mx53 specific */
-static struct clk esdhc2_mx53_clk = {
-	.id = 2,
-	.parent = &esdhc1_clk,
-	.set_parent = clk_esdhc2_mx53_set_parent,
-	.enable_reg = MXC_CCM_CCGR3,
-	.enable_shift = MXC_CCM_CCGRx_CG3_OFFSET,
-	.enable  = _clk_max_enable,
-	.disable = _clk_max_disable,
-	.secondary = &esdhc3_ipg_clk,
-};
-
-DEFINE_CLOCK_MAX(esdhc3_mx53_clk, 2, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG5_OFFSET,
-	clk_esdhc3_mx53, &pll2_sw_clk, &esdhc2_ipg_clk);
-
-static struct clk esdhc4_mx53_clk = {
-	.id = 3,
-	.parent = &esdhc1_clk,
-	.set_parent = clk_esdhc4_mx53_set_parent,
-	.enable_reg = MXC_CCM_CCGR3,
-	.enable_shift = MXC_CCM_CCGRx_CG7_OFFSET,
-	.enable  = _clk_max_enable,
-	.disable = _clk_max_disable,
-	.secondary = &esdhc4_ipg_clk,
-};
-
-static struct clk sata_clk = {
-	.parent = &ipg_clk,
-	.enable = _clk_max_enable,
-	.enable_reg = MXC_CCM_CCGR4,
-	.enable_shift = MXC_CCM_CCGRx_CG1_OFFSET,
-	.disable = _clk_max_disable,
-};
-
-static struct clk ahci_phy_clk = {
-	.parent = &usb_phy1_clk,
-};
-
-static struct clk ahci_dma_clk = {
-	.parent = &ahb_clk,
-};
-
-DEFINE_CLOCK(mipi_esc_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG5_OFFSET, NULL, NULL, NULL, &pll2_sw_clk);
-DEFINE_CLOCK(mipi_hsc2_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG4_OFFSET, NULL, NULL, &mipi_esc_clk, &pll2_sw_clk);
-DEFINE_CLOCK(mipi_hsc1_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG3_OFFSET, NULL, NULL, &mipi_hsc2_clk, &pll2_sw_clk);
-
-/* IPU */
-DEFINE_CLOCK_FULL(ipu_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG5_OFFSET,
-	NULL,  NULL, clk_ipu_enable, clk_ipu_disable, &ahb_clk, &ipu_sec_clk);
-
-DEFINE_CLOCK_FULL(emi_fast_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG7_OFFSET,
-		NULL, NULL, _clk_ccgr_enable, _clk_ccgr_disable_inwait,
-		&ddr_clk, NULL);
-
-DEFINE_CLOCK(ipu_di0_clk, 0, MXC_CCM_CCGR6, MXC_CCM_CCGRx_CG5_OFFSET,
-		NULL, NULL, &pll3_sw_clk, NULL);
-DEFINE_CLOCK(ipu_di1_clk, 0, MXC_CCM_CCGR6, MXC_CCM_CCGRx_CG6_OFFSET,
-		NULL, NULL, &pll3_sw_clk, NULL);
-
-/* PATA */
-DEFINE_CLOCK(pata_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG0_OFFSET,
-		NULL, NULL, &ipg_clk, &spba_clk);
-
-#define _REGISTER_CLOCK(d, n, c) \
-       { \
-		.dev_id = d, \
-		.con_id = n, \
-		.clk = &c,   \
-       },
-
-static struct clk_lookup mx51_lookups[] = {
-	/* i.mx51 has the i.mx21 type uart */
-	_REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk)
-	_REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk)
-	_REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk)
-	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
-	/* i.mx51 has the i.mx27 type fec */
-	_REGISTER_CLOCK("imx27-fec.0", NULL, fec_clk)
-	_REGISTER_CLOCK("mxc_pwm.0", "pwm", pwm1_clk)
-	_REGISTER_CLOCK("mxc_pwm.1", "pwm", pwm2_clk)
-	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
-	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
-	_REGISTER_CLOCK("imx-i2c.2", NULL, hsi2c_clk)
-	_REGISTER_CLOCK("mxc-ehci.0", "usb", usboh3_clk)
-	_REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_ahb_clk)
-	_REGISTER_CLOCK("mxc-ehci.0", "usb_phy1", usb_phy1_clk)
-	_REGISTER_CLOCK("mxc-ehci.1", "usb", usboh3_clk)
-	_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_ahb_clk)
-	_REGISTER_CLOCK("mxc-ehci.2", "usb", usboh3_clk)
-	_REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_ahb_clk)
-	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usboh3_clk)
-	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", ahb_clk)
-	_REGISTER_CLOCK("imx-keypad", NULL, dummy_clk)
-	_REGISTER_CLOCK("mxc_nand", NULL, nfc_clk)
-	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
-	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
-	_REGISTER_CLOCK("imx-ssi.2", NULL, ssi3_clk)
-	/* i.mx51 has the i.mx35 type sdma */
-	_REGISTER_CLOCK("imx35-sdma", NULL, sdma_clk)
-	_REGISTER_CLOCK(NULL, "ckih", ckih_clk)
-	_REGISTER_CLOCK(NULL, "ckih2", ckih2_clk)
-	_REGISTER_CLOCK(NULL, "gpt_32k", gpt_32k_clk)
-	_REGISTER_CLOCK("imx51-ecspi.0", NULL, ecspi1_clk)
-	_REGISTER_CLOCK("imx51-ecspi.1", NULL, ecspi2_clk)
-	/* i.mx51 has the i.mx35 type cspi */
-	_REGISTER_CLOCK("imx35-cspi.0", NULL, cspi_clk)
-	_REGISTER_CLOCK("sdhci-esdhc-imx51.0", NULL, esdhc1_clk)
-	_REGISTER_CLOCK("sdhci-esdhc-imx51.1", NULL, esdhc2_clk)
-	_REGISTER_CLOCK("sdhci-esdhc-imx51.2", NULL, esdhc3_clk)
-	_REGISTER_CLOCK("sdhci-esdhc-imx51.3", NULL, esdhc4_clk)
-	_REGISTER_CLOCK(NULL, "cpu_clk", cpu_clk)
-	_REGISTER_CLOCK(NULL, "iim_clk", iim_clk)
-	_REGISTER_CLOCK("imx2-wdt.0", NULL, dummy_clk)
-	_REGISTER_CLOCK("imx2-wdt.1", NULL, dummy_clk)
-	_REGISTER_CLOCK(NULL, "mipi_hsp", mipi_hsp_clk)
-	_REGISTER_CLOCK("imx-ipuv3", NULL, ipu_clk)
-	_REGISTER_CLOCK("imx-ipuv3", "di0", ipu_di0_clk)
-	_REGISTER_CLOCK("imx-ipuv3", "di1", ipu_di1_clk)
-	_REGISTER_CLOCK(NULL, "gpc_dvfs", gpc_dvfs_clk)
-	_REGISTER_CLOCK("pata_imx", NULL, pata_clk)
-};
-
-static struct clk_lookup mx53_lookups[] = {
-	/* i.mx53 has the i.mx21 type uart */
-	_REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk)
-	_REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk)
-	_REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk)
-	_REGISTER_CLOCK("imx21-uart.3", NULL, uart4_clk)
-	_REGISTER_CLOCK("imx21-uart.4", NULL, uart5_clk)
-	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
-	/* i.mx53 has the i.mx25 type fec */
-	_REGISTER_CLOCK("imx25-fec.0", NULL, fec_clk)
-	_REGISTER_CLOCK(NULL, "iim_clk", iim_clk)
-	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
-	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
-	_REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_mx53_clk)
-	/* i.mx53 has the i.mx51 type ecspi */
-	_REGISTER_CLOCK("imx51-ecspi.0", NULL, ecspi1_clk)
-	_REGISTER_CLOCK("imx51-ecspi.1", NULL, ecspi2_clk)
-	/* i.mx53 has the i.mx25 type cspi */
-	_REGISTER_CLOCK("imx35-cspi.0", NULL, cspi_clk)
-	_REGISTER_CLOCK("sdhci-esdhc-imx53.0", NULL, esdhc1_clk)
-	_REGISTER_CLOCK("sdhci-esdhc-imx53.1", NULL, esdhc2_mx53_clk)
-	_REGISTER_CLOCK("sdhci-esdhc-imx53.2", NULL, esdhc3_mx53_clk)
-	_REGISTER_CLOCK("sdhci-esdhc-imx53.3", NULL, esdhc4_mx53_clk)
-	_REGISTER_CLOCK("imx2-wdt.0", NULL, dummy_clk)
-	_REGISTER_CLOCK("imx2-wdt.1", NULL, dummy_clk)
-	/* i.mx53 has the i.mx35 type sdma */
-	_REGISTER_CLOCK("imx35-sdma", NULL, sdma_clk)
-	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
-	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
-	_REGISTER_CLOCK("imx-ssi.2", NULL, ssi3_clk)
-	_REGISTER_CLOCK("imx-keypad", NULL, dummy_clk)
-	_REGISTER_CLOCK("pata_imx", NULL, pata_clk)
-	_REGISTER_CLOCK("imx53-ahci.0", "ahci", sata_clk)
-	_REGISTER_CLOCK("imx53-ahci.0", "ahci_phy", ahci_phy_clk)
-	_REGISTER_CLOCK("imx53-ahci.0", "ahci_dma", ahci_dma_clk)
-};
-
-static void clk_tree_init(void)
-{
-	u32 reg;
-
-	ipg_perclk.set_parent(&ipg_perclk, &lp_apm_clk);
-
-	/*
-	 * Initialise the IPG PER CLK dividers to 3. IPG_PER_CLK should be at
-	 * 8MHz, its derived from lp_apm.
-	 *
-	 * FIXME: Verify if true for all boards
-	 */
-	reg = __raw_readl(MXC_CCM_CBCDR);
-	reg &= ~MXC_CCM_CBCDR_PERCLK_PRED1_MASK;
-	reg &= ~MXC_CCM_CBCDR_PERCLK_PRED2_MASK;
-	reg &= ~MXC_CCM_CBCDR_PERCLK_PODF_MASK;
-	reg |= (2 << MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET);
-	__raw_writel(reg, MXC_CCM_CBCDR);
-}
-
-int __init mx51_clocks_init(unsigned long ckil, unsigned long osc,
-			unsigned long ckih1, unsigned long ckih2)
-{
-	int i;
-
-	external_low_reference = ckil;
-	external_high_reference = ckih1;
-	ckih2_reference = ckih2;
-	oscillator_reference = osc;
-
-	for (i = 0; i < ARRAY_SIZE(mx51_lookups); i++)
-		clkdev_add(&mx51_lookups[i]);
-
-	clk_tree_init();
-
-	clk_enable(&cpu_clk);
-	clk_enable(&main_bus_clk);
-
-	clk_enable(&iim_clk);
-	imx_print_silicon_rev("i.MX51", mx51_revision());
-	clk_disable(&iim_clk);
-
-	/* move usb_phy_clk to 24MHz */
-	clk_set_parent(&usb_phy1_clk, &osc_clk);
-
-	/* set the usboh3_clk parent to pll2_sw_clk */
-	clk_set_parent(&usboh3_clk, &pll2_sw_clk);
-
-	/* Set SDHC parents to be PLL2 */
-	clk_set_parent(&esdhc1_clk, &pll2_sw_clk);
-	clk_set_parent(&esdhc2_clk, &pll2_sw_clk);
-
-	/* set SDHC root clock as 166.25MHZ*/
-	clk_set_rate(&esdhc1_clk, 166250000);
-	clk_set_rate(&esdhc2_clk, 166250000);
-
-	/* System timer */
-	mxc_timer_init(&gpt_clk, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR),
-		MX51_INT_GPT);
-	return 0;
-}
-
-int __init mx53_clocks_init(unsigned long ckil, unsigned long osc,
-			unsigned long ckih1, unsigned long ckih2)
-{
-	int i;
-
-	external_low_reference = ckil;
-	external_high_reference = ckih1;
-	ckih2_reference = ckih2;
-	oscillator_reference = osc;
-
-	for (i = 0; i < ARRAY_SIZE(mx53_lookups); i++)
-		clkdev_add(&mx53_lookups[i]);
-
-	clk_tree_init();
-
-	clk_set_parent(&uart_root_clk, &pll3_sw_clk);
-	clk_enable(&cpu_clk);
-	clk_enable(&main_bus_clk);
-
-	clk_enable(&iim_clk);
-	imx_print_silicon_rev("i.MX53", mx53_revision());
-	clk_disable(&iim_clk);
-
-	/* Set SDHC parents to be PLL2 */
-	clk_set_parent(&esdhc1_clk, &pll2_sw_clk);
-	clk_set_parent(&esdhc3_mx53_clk, &pll2_sw_clk);
-
-	/* set SDHC root clock as 200MHZ*/
-	clk_set_rate(&esdhc1_clk, 200000000);
-	clk_set_rate(&esdhc3_mx53_clk, 200000000);
-
-	/* System timer */
-	mxc_timer_init(&gpt_clk, MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR),
-		MX53_INT_GPT);
-	return 0;
-}
-
-static void __init clk_get_freq_dt(unsigned long *ckil, unsigned long *osc,
-				   unsigned long *ckih1, unsigned long *ckih2)
-{
-	struct device_node *np;
-
-	/* retrieve the freqency of fixed clocks from device tree */
-	for_each_compatible_node(np, NULL, "fixed-clock") {
-		u32 rate;
-		if (of_property_read_u32(np, "clock-frequency", &rate))
-			continue;
-
-		if (of_device_is_compatible(np, "fsl,imx-ckil"))
-			*ckil = rate;
-		else if (of_device_is_compatible(np, "fsl,imx-osc"))
-			*osc = rate;
-		else if (of_device_is_compatible(np, "fsl,imx-ckih1"))
-			*ckih1 = rate;
-		else if (of_device_is_compatible(np, "fsl,imx-ckih2"))
-			*ckih2 = rate;
-	}
-}
-
-int __init mx51_clocks_init_dt(void)
-{
-	unsigned long ckil, osc, ckih1, ckih2;
-
-	clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2);
-	return mx51_clocks_init(ckil, osc, ckih1, ckih2);
-}
-
-int __init mx53_clocks_init_dt(void)
-{
-	unsigned long ckil, osc, ckih1, ckih2;
-
-	clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2);
-	return mx53_clocks_init(ckil, osc, ckih1, ckih2);
-}
diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c
deleted file mode 100644
index 5c53282..0000000
--- a/arch/arm/mach-mx5/cpu.c
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- *
- * This file contains the CPU initialization code.
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <mach/hardware.h>
-#include <asm/io.h>
-
-static int mx5_cpu_rev = -1;
-
-#define IIM_SREV 0x24
-#define MX50_HW_ADADIG_DIGPROG	0xB0
-
-static int get_mx51_srev(void)
-{
-	void __iomem *iim_base = MX51_IO_ADDRESS(MX51_IIM_BASE_ADDR);
-	u32 rev = readl(iim_base + IIM_SREV) & 0xff;
-
-	switch (rev) {
-	case 0x0:
-		return IMX_CHIP_REVISION_2_0;
-	case 0x10:
-		return IMX_CHIP_REVISION_3_0;
-	default:
-		return IMX_CHIP_REVISION_UNKNOWN;
-	}
-}
-
-/*
- * Returns:
- *	the silicon revision of the cpu
- *	-EINVAL - not a mx51
- */
-int mx51_revision(void)
-{
-	if (!cpu_is_mx51())
-		return -EINVAL;
-
-	if (mx5_cpu_rev == -1)
-		mx5_cpu_rev = get_mx51_srev();
-
-	return mx5_cpu_rev;
-}
-EXPORT_SYMBOL(mx51_revision);
-
-#ifdef CONFIG_NEON
-
-/*
- * All versions of the silicon before Rev. 3 have broken NEON implementations.
- * Dependent on link order - so the assumption is that vfp_init is called
- * before us.
- */
-static int __init mx51_neon_fixup(void)
-{
-	if (!cpu_is_mx51())
-		return 0;
-
-	if (mx51_revision() < IMX_CHIP_REVISION_3_0 && (elf_hwcap & HWCAP_NEON)) {
-		elf_hwcap &= ~HWCAP_NEON;
-		pr_info("Turning off NEON support, detected broken NEON implementation\n");
-	}
-	return 0;
-}
-
-late_initcall(mx51_neon_fixup);
-#endif
-
-static int get_mx53_srev(void)
-{
-	void __iomem *iim_base = MX51_IO_ADDRESS(MX53_IIM_BASE_ADDR);
-	u32 rev = readl(iim_base + IIM_SREV) & 0xff;
-
-	switch (rev) {
-	case 0x0:
-		return IMX_CHIP_REVISION_1_0;
-	case 0x2:
-		return IMX_CHIP_REVISION_2_0;
-	case 0x3:
-		return IMX_CHIP_REVISION_2_1;
-	default:
-		return IMX_CHIP_REVISION_UNKNOWN;
-	}
-}
-
-/*
- * Returns:
- *	the silicon revision of the cpu
- *	-EINVAL - not a mx53
- */
-int mx53_revision(void)
-{
-	if (!cpu_is_mx53())
-		return -EINVAL;
-
-	if (mx5_cpu_rev == -1)
-		mx5_cpu_rev = get_mx53_srev();
-
-	return mx5_cpu_rev;
-}
-EXPORT_SYMBOL(mx53_revision);
-
-static int get_mx50_srev(void)
-{
-	void __iomem *anatop = ioremap(MX50_ANATOP_BASE_ADDR, SZ_8K);
-	u32 rev;
-
-	if (!anatop) {
-		mx5_cpu_rev = -EINVAL;
-		return 0;
-	}
-
-	rev = readl(anatop + MX50_HW_ADADIG_DIGPROG);
-	rev &= 0xff;
-
-	iounmap(anatop);
-	if (rev == 0x0)
-		return IMX_CHIP_REVISION_1_0;
-	else if (rev == 0x1)
-		return IMX_CHIP_REVISION_1_1;
-	return 0;
-}
-
-/*
- * Returns:
- *	the silicon revision of the cpu
- *	-EINVAL - not a mx50
- */
-int mx50_revision(void)
-{
-	if (!cpu_is_mx50())
-		return -EINVAL;
-
-	if (mx5_cpu_rev == -1)
-		mx5_cpu_rev = get_mx50_srev();
-
-	return mx5_cpu_rev;
-}
-EXPORT_SYMBOL(mx50_revision);
-
-static int __init post_cpu_init(void)
-{
-	unsigned int reg;
-	void __iomem *base;
-
-	if (cpu_is_mx51() || cpu_is_mx53()) {
-		if (cpu_is_mx51())
-			base = MX51_IO_ADDRESS(MX51_AIPS1_BASE_ADDR);
-		else
-			base = MX53_IO_ADDRESS(MX53_AIPS1_BASE_ADDR);
-
-		__raw_writel(0x0, base + 0x40);
-		__raw_writel(0x0, base + 0x44);
-		__raw_writel(0x0, base + 0x48);
-		__raw_writel(0x0, base + 0x4C);
-		reg = __raw_readl(base + 0x50) & 0x00FFFFFF;
-		__raw_writel(reg, base + 0x50);
-
-		if (cpu_is_mx51())
-			base = MX51_IO_ADDRESS(MX51_AIPS2_BASE_ADDR);
-		else
-			base = MX53_IO_ADDRESS(MX53_AIPS2_BASE_ADDR);
-
-		__raw_writel(0x0, base + 0x40);
-		__raw_writel(0x0, base + 0x44);
-		__raw_writel(0x0, base + 0x48);
-		__raw_writel(0x0, base + 0x4C);
-		reg = __raw_readl(base + 0x50) & 0x00FFFFFF;
-		__raw_writel(reg, base + 0x50);
-	}
-
-	return 0;
-}
-
-postcore_initcall(post_cpu_init);
diff --git a/arch/arm/mach-mx5/cpu_op-mx51.c b/arch/arm/mach-mx5/cpu_op-mx51.c
deleted file mode 100644
index 9d34c3d..0000000
--- a/arch/arm/mach-mx5/cpu_op-mx51.c
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/types.h>
-#include <mach/hardware.h>
-#include <linux/kernel.h>
-
-static struct cpu_op mx51_cpu_op[] = {
-	{
-	.cpu_rate = 160000000,},
-	{
-	.cpu_rate = 800000000,},
-};
-
-struct cpu_op *mx51_get_cpu_op(int *op)
-{
-	*op = ARRAY_SIZE(mx51_cpu_op);
-	return mx51_cpu_op;
-}
diff --git a/arch/arm/mach-mx5/cpu_op-mx51.h b/arch/arm/mach-mx5/cpu_op-mx51.h
deleted file mode 100644
index 97477fe..0000000
--- a/arch/arm/mach-mx5/cpu_op-mx51.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-extern struct cpu_op *mx51_get_cpu_op(int *op);
diff --git a/arch/arm/mach-mx5/crm_regs.h b/arch/arm/mach-mx5/crm_regs.h
deleted file mode 100644
index 5e11ba7..0000000
--- a/arch/arm/mach-mx5/crm_regs.h
+++ /dev/null
@@ -1,600 +0,0 @@
-/*
- * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __ARCH_ARM_MACH_MX51_CRM_REGS_H__
-#define __ARCH_ARM_MACH_MX51_CRM_REGS_H__
-
-#define MX51_CCM_BASE		MX51_IO_ADDRESS(MX51_CCM_BASE_ADDR)
-#define MX51_DPLL1_BASE		MX51_IO_ADDRESS(MX51_PLL1_BASE_ADDR)
-#define MX51_DPLL2_BASE		MX51_IO_ADDRESS(MX51_PLL2_BASE_ADDR)
-#define MX51_DPLL3_BASE		MX51_IO_ADDRESS(MX51_PLL3_BASE_ADDR)
-#define MX51_CORTEXA8_BASE	MX51_IO_ADDRESS(MX51_ARM_BASE_ADDR)
-#define MX51_GPC_BASE		MX51_IO_ADDRESS(MX51_GPC_BASE_ADDR)
-
-/*MX53*/
-#define MX53_CCM_BASE		MX53_IO_ADDRESS(MX53_CCM_BASE_ADDR)
-#define MX53_DPLL1_BASE		MX53_IO_ADDRESS(MX53_PLL1_BASE_ADDR)
-#define MX53_DPLL2_BASE		MX53_IO_ADDRESS(MX53_PLL2_BASE_ADDR)
-#define MX53_DPLL3_BASE		MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR)
-#define MX53_DPLL4_BASE		MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR)
-
-/* PLL Register Offsets */
-#define MXC_PLL_DP_CTL			0x00
-#define MXC_PLL_DP_CONFIG		0x04
-#define MXC_PLL_DP_OP			0x08
-#define MXC_PLL_DP_MFD			0x0C
-#define MXC_PLL_DP_MFN			0x10
-#define MXC_PLL_DP_MFNMINUS		0x14
-#define MXC_PLL_DP_MFNPLUS		0x18
-#define MXC_PLL_DP_HFS_OP		0x1C
-#define MXC_PLL_DP_HFS_MFD		0x20
-#define MXC_PLL_DP_HFS_MFN		0x24
-#define MXC_PLL_DP_MFN_TOGC		0x28
-#define MXC_PLL_DP_DESTAT		0x2c
-
-/* PLL Register Bit definitions */
-#define MXC_PLL_DP_CTL_MUL_CTRL		0x2000
-#define MXC_PLL_DP_CTL_DPDCK0_2_EN	0x1000
-#define MXC_PLL_DP_CTL_DPDCK0_2_OFFSET	12
-#define MXC_PLL_DP_CTL_ADE		0x800
-#define MXC_PLL_DP_CTL_REF_CLK_DIV	0x400
-#define MXC_PLL_DP_CTL_REF_CLK_SEL_MASK	(3 << 8)
-#define MXC_PLL_DP_CTL_REF_CLK_SEL_OFFSET	8
-#define MXC_PLL_DP_CTL_HFSM		0x80
-#define MXC_PLL_DP_CTL_PRE		0x40
-#define MXC_PLL_DP_CTL_UPEN		0x20
-#define MXC_PLL_DP_CTL_RST		0x10
-#define MXC_PLL_DP_CTL_RCP		0x8
-#define MXC_PLL_DP_CTL_PLM		0x4
-#define MXC_PLL_DP_CTL_BRM0		0x2
-#define MXC_PLL_DP_CTL_LRF		0x1
-
-#define MXC_PLL_DP_CONFIG_BIST		0x8
-#define MXC_PLL_DP_CONFIG_SJC_CE	0x4
-#define MXC_PLL_DP_CONFIG_AREN		0x2
-#define MXC_PLL_DP_CONFIG_LDREQ		0x1
-
-#define MXC_PLL_DP_OP_MFI_OFFSET	4
-#define MXC_PLL_DP_OP_MFI_MASK		(0xF << 4)
-#define MXC_PLL_DP_OP_PDF_OFFSET	0
-#define MXC_PLL_DP_OP_PDF_MASK		0xF
-
-#define MXC_PLL_DP_MFD_OFFSET		0
-#define MXC_PLL_DP_MFD_MASK		0x07FFFFFF
-
-#define MXC_PLL_DP_MFN_OFFSET		0x0
-#define MXC_PLL_DP_MFN_MASK		0x07FFFFFF
-
-#define MXC_PLL_DP_MFN_TOGC_TOG_DIS	(1 << 17)
-#define MXC_PLL_DP_MFN_TOGC_TOG_EN	(1 << 16)
-#define MXC_PLL_DP_MFN_TOGC_CNT_OFFSET	0x0
-#define MXC_PLL_DP_MFN_TOGC_CNT_MASK	0xFFFF
-
-#define MXC_PLL_DP_DESTAT_TOG_SEL	(1 << 31)
-#define MXC_PLL_DP_DESTAT_MFN		0x07FFFFFF
-
-/* Register addresses of CCM*/
-#define MXC_CCM_CCR		(MX51_CCM_BASE + 0x00)
-#define MXC_CCM_CCDR		(MX51_CCM_BASE + 0x04)
-#define MXC_CCM_CSR		(MX51_CCM_BASE + 0x08)
-#define MXC_CCM_CCSR		(MX51_CCM_BASE + 0x0C)
-#define MXC_CCM_CACRR		(MX51_CCM_BASE + 0x10)
-#define MXC_CCM_CBCDR		(MX51_CCM_BASE + 0x14)
-#define MXC_CCM_CBCMR		(MX51_CCM_BASE + 0x18)
-#define MXC_CCM_CSCMR1		(MX51_CCM_BASE + 0x1C)
-#define MXC_CCM_CSCMR2		(MX51_CCM_BASE + 0x20)
-#define MXC_CCM_CSCDR1		(MX51_CCM_BASE + 0x24)
-#define MXC_CCM_CS1CDR		(MX51_CCM_BASE + 0x28)
-#define MXC_CCM_CS2CDR		(MX51_CCM_BASE + 0x2C)
-#define MXC_CCM_CDCDR		(MX51_CCM_BASE + 0x30)
-#define MXC_CCM_CHSCDR		(MX51_CCM_BASE + 0x34)
-#define MXC_CCM_CSCDR2		(MX51_CCM_BASE + 0x38)
-#define MXC_CCM_CSCDR3		(MX51_CCM_BASE + 0x3C)
-#define MXC_CCM_CSCDR4		(MX51_CCM_BASE + 0x40)
-#define MXC_CCM_CWDR		(MX51_CCM_BASE + 0x44)
-#define MXC_CCM_CDHIPR		(MX51_CCM_BASE + 0x48)
-#define MXC_CCM_CDCR		(MX51_CCM_BASE + 0x4C)
-#define MXC_CCM_CTOR		(MX51_CCM_BASE + 0x50)
-#define MXC_CCM_CLPCR		(MX51_CCM_BASE + 0x54)
-#define MXC_CCM_CISR		(MX51_CCM_BASE + 0x58)
-#define MXC_CCM_CIMR		(MX51_CCM_BASE + 0x5C)
-#define MXC_CCM_CCOSR		(MX51_CCM_BASE + 0x60)
-#define MXC_CCM_CGPR		(MX51_CCM_BASE + 0x64)
-#define MXC_CCM_CCGR0		(MX51_CCM_BASE + 0x68)
-#define MXC_CCM_CCGR1		(MX51_CCM_BASE + 0x6C)
-#define MXC_CCM_CCGR2		(MX51_CCM_BASE + 0x70)
-#define MXC_CCM_CCGR3		(MX51_CCM_BASE + 0x74)
-#define MXC_CCM_CCGR4		(MX51_CCM_BASE + 0x78)
-#define MXC_CCM_CCGR5		(MX51_CCM_BASE + 0x7C)
-#define MXC_CCM_CCGR6		(MX51_CCM_BASE + 0x80)
-#define MXC_CCM_CCGR7		(MX51_CCM_BASE + 0x84)
-
-#define MXC_CCM_CMEOR		(MX51_CCM_BASE + 0x84)
-
-/* Define the bits in register CCR */
-#define MXC_CCM_CCR_COSC_EN		(1 << 12)
-#define MXC_CCM_CCR_FPM_MULT_MASK	(1 << 11)
-#define MXC_CCM_CCR_CAMP2_EN		(1 << 10)
-#define MXC_CCM_CCR_CAMP1_EN		(1 << 9)
-#define MXC_CCM_CCR_FPM_EN		(1 << 8)
-#define MXC_CCM_CCR_OSCNT_OFFSET	(0)
-#define MXC_CCM_CCR_OSCNT_MASK	(0xFF)
-
-/* Define the bits in register CCDR */
-#define MXC_CCM_CCDR_HSC_HS_MASK	(0x1 << 18)
-#define MXC_CCM_CCDR_IPU_HS_MASK	(0x1 << 17)
-#define MXC_CCM_CCDR_EMI_HS_MASK	(0x1 << 16)
-
-/* Define the bits in register CSR */
-#define MXC_CCM_CSR_COSR_READY	(1 << 5)
-#define MXC_CCM_CSR_LVS_VALUE	(1 << 4)
-#define MXC_CCM_CSR_CAMP2_READY	(1 << 3)
-#define MXC_CCM_CSR_CAMP1_READY	(1 << 2)
-#define MXC_CCM_CSR_FPM_READY	(1 << 1)
-#define MXC_CCM_CSR_REF_EN_B	(1 << 0)
-
-/* Define the bits in register CCSR */
-#define MXC_CCM_CCSR_LP_APM_SEL		(0x1 << 9)
-#define MXC_CCM_CCSR_STEP_SEL_OFFSET	(7)
-#define MXC_CCM_CCSR_STEP_SEL_MASK	(0x3 << 7)
-#define MXC_CCM_CCSR_STEP_SEL_LP_APM	   0
-#define MXC_CCM_CCSR_STEP_SEL_PLL1_BYPASS  1 /* Only when JTAG connected? */
-#define MXC_CCM_CCSR_STEP_SEL_PLL2_DIVIDED 2
-#define MXC_CCM_CCSR_STEP_SEL_PLL3_DIVIDED 3
-#define MXC_CCM_CCSR_PLL2_PODF_OFFSET	(5)
-#define MXC_CCM_CCSR_PLL2_PODF_MASK	(0x3 << 5)
-#define MXC_CCM_CCSR_PLL3_PODF_OFFSET	(3)
-#define MXC_CCM_CCSR_PLL3_PODF_MASK	(0x3 << 3)
-#define MXC_CCM_CCSR_PLL1_SW_CLK_SEL	(1 << 2) /* 0: pll1_main_clk,
-						    1: step_clk */
-#define MXC_CCM_CCSR_PLL2_SW_CLK_SEL	(1 << 1)
-#define MXC_CCM_CCSR_PLL3_SW_CLK_SEL	(1 << 0)
-
-/* Define the bits in register CACRR */
-#define MXC_CCM_CACRR_ARM_PODF_OFFSET	(0)
-#define MXC_CCM_CACRR_ARM_PODF_MASK	(0x7)
-
-/* Define the bits in register CBCDR */
-#define MXC_CCM_CBCDR_EMI_CLK_SEL		(0x1 << 26)
-#define MXC_CCM_CBCDR_PERIPH_CLK_SEL		(0x1 << 25)
-#define MXC_CCM_CBCDR_DDR_HF_SEL_OFFSET		(30)
-#define MXC_CCM_CBCDR_DDR_HF_SEL		(0x1 << 30)
-#define MXC_CCM_CBCDR_DDR_PODF_OFFSET		(27)
-#define MXC_CCM_CBCDR_DDR_PODF_MASK		(0x7 << 27)
-#define MXC_CCM_CBCDR_EMI_PODF_OFFSET		(22)
-#define MXC_CCM_CBCDR_EMI_PODF_MASK		(0x7 << 22)
-#define MXC_CCM_CBCDR_AXI_B_PODF_OFFSET		(19)
-#define MXC_CCM_CBCDR_AXI_B_PODF_MASK		(0x7 << 19)
-#define MXC_CCM_CBCDR_AXI_A_PODF_OFFSET		(16)
-#define MXC_CCM_CBCDR_AXI_A_PODF_MASK		(0x7 << 16)
-#define MXC_CCM_CBCDR_NFC_PODF_OFFSET		(13)
-#define MXC_CCM_CBCDR_NFC_PODF_MASK		(0x7 << 13)
-#define MXC_CCM_CBCDR_AHB_PODF_OFFSET		(10)
-#define MXC_CCM_CBCDR_AHB_PODF_MASK		(0x7 << 10)
-#define MXC_CCM_CBCDR_IPG_PODF_OFFSET		(8)
-#define MXC_CCM_CBCDR_IPG_PODF_MASK		(0x3 << 8)
-#define MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET	(6)
-#define MXC_CCM_CBCDR_PERCLK_PRED1_MASK		(0x3 << 6)
-#define MXC_CCM_CBCDR_PERCLK_PRED2_OFFSET	(3)
-#define MXC_CCM_CBCDR_PERCLK_PRED2_MASK		(0x7 << 3)
-#define MXC_CCM_CBCDR_PERCLK_PODF_OFFSET	(0)
-#define MXC_CCM_CBCDR_PERCLK_PODF_MASK		(0x7)
-
-/* Define the bits in register CBCMR */
-#define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_OFFSET	(14)
-#define MXC_CCM_CBCMR_VPU_AXI_CLK_SEL_MASK	(0x3 << 14)
-#define MXC_CCM_CBCMR_PERIPH_CLK_SEL_OFFSET	(12)
-#define MXC_CCM_CBCMR_PERIPH_CLK_SEL_MASK	(0x3 << 12)
-#define MXC_CCM_CBCMR_DDR_CLK_SEL_OFFSET	(10)
-#define MXC_CCM_CBCMR_DDR_CLK_SEL_MASK		(0x3 << 10)
-#define MXC_CCM_CBCMR_ARM_AXI_CLK_SEL_OFFSET	(8)
-#define MXC_CCM_CBCMR_ARM_AXI_CLK_SEL_MASK	(0x3 << 8)
-#define MXC_CCM_CBCMR_IPU_HSP_CLK_SEL_OFFSET	(6)
-#define MXC_CCM_CBCMR_IPU_HSP_CLK_SEL_MASK	(0x3 << 6)
-#define MXC_CCM_CBCMR_GPU_CLK_SEL_OFFSET	(4)
-#define MXC_CCM_CBCMR_GPU_CLK_SEL_MASK		(0x3 << 4)
-#define MXC_CCM_CBCMR_GPU2D_CLK_SEL_OFFSET	(14)
-#define MXC_CCM_CBCMR_GPU2D_CLK_SEL_MASK	(0x3 << 14)
-#define MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL	(0x1 << 1)
-#define MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL	(0x1 << 0)
-
-/* Define the bits in register CSCMR1 */
-#define MXC_CCM_CSCMR1_SSI_EXT2_CLK_SEL_OFFSET		(30)
-#define MXC_CCM_CSCMR1_SSI_EXT2_CLK_SEL_MASK		(0x3 << 30)
-#define MXC_CCM_CSCMR1_SSI_EXT1_CLK_SEL_OFFSET		(28)
-#define MXC_CCM_CSCMR1_SSI_EXT1_CLK_SEL_MASK		(0x3 << 28)
-#define MXC_CCM_CSCMR1_USB_PHY_CLK_SEL_OFFSET		(26)
-#define MXC_CCM_CSCMR1_USB_PHY_CLK_SEL			(0x1 << 26)
-#define MXC_CCM_CSCMR1_UART_CLK_SEL_OFFSET		(24)
-#define MXC_CCM_CSCMR1_UART_CLK_SEL_MASK		(0x3 << 24)
-#define MXC_CCM_CSCMR1_USBOH3_CLK_SEL_OFFSET		(22)
-#define MXC_CCM_CSCMR1_USBOH3_CLK_SEL_MASK		(0x3 << 22)
-#define MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_OFFSET	(20)
-#define MXC_CCM_CSCMR1_ESDHC1_MSHC1_CLK_SEL_MASK	(0x3 << 20)
-#define MXC_CCM_CSCMR1_ESDHC3_CLK_SEL			(0x1 << 19)
-#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_MX53_CLK_SEL	(0x1 << 19)
-#define MXC_CCM_CSCMR1_ESDHC4_CLK_SEL			(0x1 << 18)
-#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_OFFSET	(16)
-#define MXC_CCM_CSCMR1_ESDHC2_MSHC2_CLK_SEL_MASK	(0x3 << 16)
-#define MXC_CCM_CSCMR1_ESDHC3_MX53_CLK_SEL_OFFSET	(16)
-#define MXC_CCM_CSCMR1_ESDHC3_MX53_CLK_SEL_MASK		(0x3 << 16)
-#define MXC_CCM_CSCMR1_SSI1_CLK_SEL_OFFSET		(14)
-#define MXC_CCM_CSCMR1_SSI1_CLK_SEL_MASK		(0x3 << 14)
-#define MXC_CCM_CSCMR1_SSI2_CLK_SEL_OFFSET		(12)
-#define MXC_CCM_CSCMR1_SSI2_CLK_SEL_MASK		(0x3 << 12)
-#define MXC_CCM_CSCMR1_SSI3_CLK_SEL			(0x1 << 11)
-#define MXC_CCM_CSCMR1_VPU_RCLK_SEL			(0x1 << 10)
-#define MXC_CCM_CSCMR1_SSI_APM_CLK_SEL_OFFSET		(8)
-#define MXC_CCM_CSCMR1_SSI_APM_CLK_SEL_MASK		(0x3 << 8)
-#define MXC_CCM_CSCMR1_TVE_CLK_SEL			(0x1 << 7)
-#define MXC_CCM_CSCMR1_TVE_EXT_CLK_SEL			(0x1 << 6)
-#define MXC_CCM_CSCMR1_CSPI_CLK_SEL_OFFSET		(4)
-#define MXC_CCM_CSCMR1_CSPI_CLK_SEL_MASK		(0x3 << 4)
-#define MXC_CCM_CSCMR1_SPDIF_CLK_SEL_OFFSET		(2)
-#define MXC_CCM_CSCMR1_SPDIF_CLK_SEL_MASK		(0x3 << 2)
-#define MXC_CCM_CSCMR1_SSI_EXT2_COM_CLK_SEL		(0x1 << 1)
-#define MXC_CCM_CSCMR1_SSI_EXT1_COM_CLK_SEL		(0x1)
-
-/* Define the bits in register CSCMR2 */
-#define MXC_CCM_CSCMR2_DI_CLK_SEL_OFFSET(n)		(26+n*3)
-#define MXC_CCM_CSCMR2_DI_CLK_SEL_MASK(n)		(0x7 << (26+n*3))
-#define MXC_CCM_CSCMR2_CSI_MCLK2_CLK_SEL_OFFSET		(24)
-#define MXC_CCM_CSCMR2_CSI_MCLK2_CLK_SEL_MASK		(0x3 << 24)
-#define MXC_CCM_CSCMR2_CSI_MCLK1_CLK_SEL_OFFSET		(22)
-#define MXC_CCM_CSCMR2_CSI_MCLK1_CLK_SEL_MASK		(0x3 << 22)
-#define MXC_CCM_CSCMR2_ESC_CLK_SEL_OFFSET		(20)
-#define MXC_CCM_CSCMR2_ESC_CLK_SEL_MASK			(0x3 << 20)
-#define MXC_CCM_CSCMR2_HSC2_CLK_SEL_OFFSET		(18)
-#define MXC_CCM_CSCMR2_HSC2_CLK_SEL_MASK		(0x3 << 18)
-#define MXC_CCM_CSCMR2_HSC1_CLK_SEL_OFFSET		(16)
-#define MXC_CCM_CSCMR2_HSC1_CLK_SEL_MASK		(0x3 << 16)
-#define MXC_CCM_CSCMR2_HSI2C_CLK_SEL_OFFSET		(14)
-#define MXC_CCM_CSCMR2_HSI2C_CLK_SEL_MASK		(0x3 << 14)
-#define MXC_CCM_CSCMR2_FIRI_CLK_SEL_OFFSET		(12)
-#define MXC_CCM_CSCMR2_FIRI_CLK_SEL_MASK		(0x3 << 12)
-#define MXC_CCM_CSCMR2_SIM_CLK_SEL_OFFSET		(10)
-#define MXC_CCM_CSCMR2_SIM_CLK_SEL_MASK			(0x3 << 10)
-#define MXC_CCM_CSCMR2_SLIMBUS_COM			(0x1 << 9)
-#define MXC_CCM_CSCMR2_SLIMBUS_CLK_SEL_OFFSET		(6)
-#define MXC_CCM_CSCMR2_SLIMBUS_CLK_SEL_MASK		(0x7 << 6)
-#define MXC_CCM_CSCMR2_SPDIF1_COM			(1 << 5)
-#define MXC_CCM_CSCMR2_SPDIF0_COM			(1 << 4)
-#define MXC_CCM_CSCMR2_SPDIF1_CLK_SEL_OFFSET		(2)
-#define MXC_CCM_CSCMR2_SPDIF1_CLK_SEL_MASK		(0x3 << 2)
-#define MXC_CCM_CSCMR2_SPDIF0_CLK_SEL_OFFSET		(0)
-#define MXC_CCM_CSCMR2_SPDIF0_CLK_SEL_MASK		(0x3)
-
-/* Define the bits in register CSCDR1 */
-#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_OFFSET	(22)
-#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PRED_MASK	(0x7 << 22)
-#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_OFFSET	(19)
-#define MXC_CCM_CSCDR1_ESDHC2_MSHC2_CLK_PODF_MASK	(0x7 << 19)
-#define MXC_CCM_CSCDR1_ESDHC3_MX53_CLK_PRED_OFFSET	(22)
-#define MXC_CCM_CSCDR1_ESDHC3_MX53_CLK_PRED_MASK	(0x7 << 22)
-#define MXC_CCM_CSCDR1_ESDHC3_MX53_CLK_PODF_OFFSET	(19)
-#define MXC_CCM_CSCDR1_ESDHC3_MX53_CLK_PODF_MASK	(0x7 << 19)
-#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_OFFSET	(16)
-#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PRED_MASK	(0x7 << 16)
-#define MXC_CCM_CSCDR1_PGC_CLK_PODF_OFFSET		(14)
-#define MXC_CCM_CSCDR1_PGC_CLK_PODF_MASK		(0x3 << 14)
-#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF_OFFSET	(11)
-#define MXC_CCM_CSCDR1_ESDHC1_MSHC1_CLK_PODF_MASK	(0x7 << 11)
-#define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_OFFSET		(8)
-#define MXC_CCM_CSCDR1_USBOH3_CLK_PRED_MASK		(0x7 << 8)
-#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_OFFSET		(6)
-#define MXC_CCM_CSCDR1_USBOH3_CLK_PODF_MASK		(0x3 << 6)
-#define MXC_CCM_CSCDR1_UART_CLK_PRED_OFFSET		(3)
-#define MXC_CCM_CSCDR1_UART_CLK_PRED_MASK		(0x7 << 3)
-#define MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET		(0)
-#define MXC_CCM_CSCDR1_UART_CLK_PODF_MASK		(0x7)
-
-/* Define the bits in register CS1CDR and CS2CDR */
-#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PRED_OFFSET		(22)
-#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PRED_MASK		(0x7 << 22)
-#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PODF_OFFSET		(16)
-#define MXC_CCM_CS1CDR_SSI_EXT1_CLK_PODF_MASK		(0x3F << 16)
-#define MXC_CCM_CS1CDR_SSI1_CLK_PRED_OFFSET		(6)
-#define MXC_CCM_CS1CDR_SSI1_CLK_PRED_MASK		(0x7 << 6)
-#define MXC_CCM_CS1CDR_SSI1_CLK_PODF_OFFSET		(0)
-#define MXC_CCM_CS1CDR_SSI1_CLK_PODF_MASK		(0x3F)
-
-#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PRED_OFFSET		(22)
-#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PRED_MASK		(0x7 << 22)
-#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PODF_OFFSET		(16)
-#define MXC_CCM_CS2CDR_SSI_EXT2_CLK_PODF_MASK		(0x3F << 16)
-#define MXC_CCM_CS2CDR_SSI2_CLK_PRED_OFFSET		(6)
-#define MXC_CCM_CS2CDR_SSI2_CLK_PRED_MASK		(0x7 << 6)
-#define MXC_CCM_CS2CDR_SSI2_CLK_PODF_OFFSET		(0)
-#define MXC_CCM_CS2CDR_SSI2_CLK_PODF_MASK		(0x3F)
-
-/* Define the bits in register CDCDR */
-#define MXC_CCM_CDCDR_TVE_CLK_PRED_OFFSET		(28)
-#define MXC_CCM_CDCDR_TVE_CLK_PRED_MASK			(0x7 << 28)
-#define MXC_CCM_CDCDR_SPDIF0_CLK_PRED_OFFSET		(25)
-#define MXC_CCM_CDCDR_SPDIF0_CLK_PRED_MASK		(0x7 << 25)
-#define MXC_CCM_CDCDR_SPDIF0_CLK_PODF_OFFSET		(19)
-#define MXC_CCM_CDCDR_SPDIF0_CLK_PODF_MASK		(0x3F << 19)
-#define MXC_CCM_CDCDR_SPDIF1_CLK_PRED_OFFSET		(16)
-#define MXC_CCM_CDCDR_SPDIF1_CLK_PRED_MASK		(0x7 << 16)
-#define MXC_CCM_CDCDR_SPDIF1_CLK_PODF_OFFSET		(9)
-#define MXC_CCM_CDCDR_SPDIF1_CLK_PODF_MASK		(0x3F << 9)
-#define MXC_CCM_CDCDR_DI_CLK_PRED_OFFSET		(6)
-#define MXC_CCM_CDCDR_DI_CLK_PRED_MASK			(0x7 << 6)
-#define MXC_CCM_CDCDR_USB_PHY_PRED_OFFSET		(3)
-#define MXC_CCM_CDCDR_USB_PHY_PRED_MASK			(0x7 << 3)
-#define MXC_CCM_CDCDR_USB_PHY_PODF_OFFSET		(0)
-#define MXC_CCM_CDCDR_USB_PHY_PODF_MASK			(0x7)
-
-/* Define the bits in register CHSCCDR */
-#define MXC_CCM_CHSCCDR_ESC_CLK_PRED_OFFSET		(12)
-#define MXC_CCM_CHSCCDR_ESC_CLK_PRED_MASK		(0x7 << 12)
-#define MXC_CCM_CHSCCDR_ESC_CLK_PODF_OFFSET		(6)
-#define MXC_CCM_CHSCCDR_ESC_CLK_PODF_MASK		(0x3F << 6)
-#define MXC_CCM_CHSCCDR_HSC2_CLK_PODF_OFFSET		(3)
-#define MXC_CCM_CHSCCDR_HSC2_CLK_PODF_MASK		(0x7 << 3)
-#define MXC_CCM_CHSCCDR_HSC1_CLK_PODF_OFFSET		(0)
-#define MXC_CCM_CHSCCDR_HSC1_CLK_PODF_MASK		(0x7)
-
-/* Define the bits in register CSCDR2 */
-#define MXC_CCM_CSCDR2_CSPI_CLK_PRED_OFFSET		(25)
-#define MXC_CCM_CSCDR2_CSPI_CLK_PRED_MASK		(0x7 << 25)
-#define MXC_CCM_CSCDR2_CSPI_CLK_PODF_OFFSET		(19)
-#define MXC_CCM_CSCDR2_CSPI_CLK_PODF_MASK		(0x3F << 19)
-#define MXC_CCM_CSCDR2_SIM_CLK_PRED_OFFSET		(16)
-#define MXC_CCM_CSCDR2_SIM_CLK_PRED_MASK		(0x7 << 16)
-#define MXC_CCM_CSCDR2_SIM_CLK_PODF_OFFSET		(9)
-#define MXC_CCM_CSCDR2_SIM_CLK_PODF_MASK		(0x3F << 9)
-#define MXC_CCM_CSCDR2_SLIMBUS_CLK_PRED_OFFSET		(6)
-#define MXC_CCM_CSCDR2_SLIMBUS_PRED_MASK		(0x7 << 6)
-#define MXC_CCM_CSCDR2_SLIMBUS_PODF_OFFSET		(0)
-#define MXC_CCM_CSCDR2_SLIMBUS_PODF_MASK		(0x3F)
-
-/* Define the bits in register CSCDR3 */
-#define MXC_CCM_CSCDR3_HSI2C_CLK_PRED_OFFSET		(16)
-#define MXC_CCM_CSCDR3_HSI2C_CLK_PRED_MASK		(0x7 << 16)
-#define MXC_CCM_CSCDR3_HSI2C_CLK_PODF_OFFSET		(9)
-#define MXC_CCM_CSCDR3_HSI2C_CLK_PODF_MASK		(0x3F << 9)
-#define MXC_CCM_CSCDR3_FIRI_CLK_PRED_OFFSET		(6)
-#define MXC_CCM_CSCDR3_FIRI_CLK_PRED_MASK		(0x7 << 6)
-#define MXC_CCM_CSCDR3_FIRI_CLK_PODF_OFFSET		(0)
-#define MXC_CCM_CSCDR3_FIRI_CLK_PODF_MASK		(0x3F)
-
-/* Define the bits in register CSCDR4 */
-#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PRED_OFFSET	(16)
-#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PRED_MASK		(0x7 << 16)
-#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PODF_OFFSET	(9)
-#define MXC_CCM_CSCDR4_CSI_MCLK2_CLK_PODF_MASK		(0x3F << 9)
-#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PRED_OFFSET	(6)
-#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PRED_MASK		(0x7 << 6)
-#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PODF_OFFSET	(0)
-#define MXC_CCM_CSCDR4_CSI_MCLK1_CLK_PODF_MASK		(0x3F)
-
-/* Define the bits in register CDHIPR */
-#define MXC_CCM_CDHIPR_ARM_PODF_BUSY			(1 << 16)
-#define MXC_CCM_CDHIPR_DDR_HF_CLK_SEL_BUSY		(1 << 8)
-#define MXC_CCM_CDHIPR_DDR_PODF_BUSY			(1 << 7)
-#define MXC_CCM_CDHIPR_EMI_CLK_SEL_BUSY			(1 << 6)
-#define MXC_CCM_CDHIPR_PERIPH_CLK_SEL_BUSY		(1 << 5)
-#define MXC_CCM_CDHIPR_NFC_IPG_INT_MEM_PODF_BUSY	(1 << 4)
-#define MXC_CCM_CDHIPR_AHB_PODF_BUSY			(1 << 3)
-#define MXC_CCM_CDHIPR_EMI_PODF_BUSY			(1 << 2)
-#define MXC_CCM_CDHIPR_AXI_B_PODF_BUSY			(1 << 1)
-#define MXC_CCM_CDHIPR_AXI_A_PODF_BUSY			(1 << 0)
-
-/* Define the bits in register CDCR */
-#define MXC_CCM_CDCR_ARM_FREQ_SHIFT_DIVIDER		(0x1 << 2)
-#define MXC_CCM_CDCR_PERIPH_CLK_DVFS_PODF_OFFSET	(0)
-#define MXC_CCM_CDCR_PERIPH_CLK_DVFS_PODF_MASK		(0x3)
-
-/* Define the bits in register CLPCR */
-#define MXC_CCM_CLPCR_BYPASS_HSC_LPM_HS		(0x1 << 23)
-#define MXC_CCM_CLPCR_BYPASS_SCC_LPM_HS		(0x1 << 22)
-#define MX51_CCM_CLPCR_BYPASS_MAX_LPM_HS		(0x1 << 21)
-#define MX53_CCM_CLPCR_BYPASS_MAX_LPM_HS		(0x1 << 25)
-#define MXC_CCM_CLPCR_BYPASS_SDMA_LPM_HS	(0x1 << 20)
-#define MXC_CCM_CLPCR_BYPASS_EMI_LPM_HS		(0x1 << 19)
-#define MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS		(0x1 << 18)
-#define MXC_CCM_CLPCR_BYPASS_RTIC_LPM_HS	(0x1 << 17)
-#define MXC_CCM_CLPCR_BYPASS_RNGC_LPM_HS	(0x1 << 16)
-#define MXC_CCM_CLPCR_COSC_PWRDOWN		(0x1 << 11)
-#define MXC_CCM_CLPCR_STBY_COUNT_OFFSET		(9)
-#define MXC_CCM_CLPCR_STBY_COUNT_MASK		(0x3 << 9)
-#define MXC_CCM_CLPCR_VSTBY			(0x1 << 8)
-#define MXC_CCM_CLPCR_DIS_REF_OSC		(0x1 << 7)
-#define MXC_CCM_CLPCR_SBYOS			(0x1 << 6)
-#define MXC_CCM_CLPCR_ARM_CLK_DIS_ON_LPM	(0x1 << 5)
-#define MXC_CCM_CLPCR_LPSR_CLK_SEL_OFFSET	(3)
-#define MXC_CCM_CLPCR_LPSR_CLK_SEL_MASK		(0x3 << 3)
-#define MXC_CCM_CLPCR_LPM_OFFSET		(0)
-#define MXC_CCM_CLPCR_LPM_MASK			(0x3)
-
-/* Define the bits in register CISR */
-#define MXC_CCM_CISR_ARM_PODF_LOADED			(0x1 << 25)
-#define MXC_CCM_CISR_NFC_IPG_INT_MEM_PODF_LOADED	(0x1 << 21)
-#define MXC_CCM_CISR_AHB_PODF_LOADED			(0x1 << 20)
-#define MXC_CCM_CISR_EMI_PODF_LOADED			(0x1 << 19)
-#define MXC_CCM_CISR_AXI_B_PODF_LOADED			(0x1 << 18)
-#define MXC_CCM_CISR_AXI_A_PODF_LOADED			(0x1 << 17)
-#define MXC_CCM_CISR_DIVIDER_LOADED			(0x1 << 16)
-#define MXC_CCM_CISR_COSC_READY				(0x1 << 6)
-#define MXC_CCM_CISR_CKIH2_READY			(0x1 << 5)
-#define MXC_CCM_CISR_CKIH_READY				(0x1 << 4)
-#define MXC_CCM_CISR_FPM_READY				(0x1 << 3)
-#define MXC_CCM_CISR_LRF_PLL3				(0x1 << 2)
-#define MXC_CCM_CISR_LRF_PLL2				(0x1 << 1)
-#define MXC_CCM_CISR_LRF_PLL1				(0x1)
-
-/* Define the bits in register CIMR */
-#define MXC_CCM_CIMR_MASK_ARM_PODF_LOADED		(0x1 << 25)
-#define MXC_CCM_CIMR_MASK_NFC_IPG_INT_MEM_PODF_LOADED	(0x1 << 21)
-#define MXC_CCM_CIMR_MASK_EMI_PODF_LOADED		(0x1 << 20)
-#define MXC_CCM_CIMR_MASK_AXI_C_PODF_LOADED		(0x1 << 19)
-#define MXC_CCM_CIMR_MASK_AXI_B_PODF_LOADED		(0x1 << 18)
-#define MXC_CCM_CIMR_MASK_AXI_A_PODF_LOADED		(0x1 << 17)
-#define MXC_CCM_CIMR_MASK_DIVIDER_LOADED		(0x1 << 16)
-#define MXC_CCM_CIMR_MASK_COSC_READY			(0x1 << 5)
-#define MXC_CCM_CIMR_MASK_CKIH_READY			(0x1 << 4)
-#define MXC_CCM_CIMR_MASK_FPM_READY			(0x1 << 3)
-#define MXC_CCM_CIMR_MASK_LRF_PLL3			(0x1 << 2)
-#define MXC_CCM_CIMR_MASK_LRF_PLL2			(0x1 << 1)
-#define MXC_CCM_CIMR_MASK_LRF_PLL1			(0x1)
-
-/* Define the bits in register CCOSR */
-#define MXC_CCM_CCOSR_CKO2_EN_OFFSET			(0x1 << 24)
-#define MXC_CCM_CCOSR_CKO2_DIV_OFFSET			(21)
-#define MXC_CCM_CCOSR_CKO2_DIV_MASK			(0x7 << 21)
-#define MXC_CCM_CCOSR_CKO2_SEL_OFFSET			(16)
-#define MXC_CCM_CCOSR_CKO2_SEL_MASK			(0x1F << 16)
-#define MXC_CCM_CCOSR_CKOL_EN				(0x1 << 7)
-#define MXC_CCM_CCOSR_CKOL_DIV_OFFSET			(4)
-#define MXC_CCM_CCOSR_CKOL_DIV_MASK			(0x7 << 4)
-#define MXC_CCM_CCOSR_CKOL_SEL_OFFSET			(0)
-#define MXC_CCM_CCOSR_CKOL_SEL_MASK			(0xF)
-
-/* Define the bits in registers CGPR */
-#define MXC_CCM_CGPR_EFUSE_PROG_SUPPLY_GATE		(0x1 << 4)
-#define MXC_CCM_CGPR_FPM_SEL				(0x1 << 3)
-#define MXC_CCM_CGPR_VL_L2BIST_CLKDIV_OFFSET		(0)
-#define MXC_CCM_CGPR_VL_L2BIST_CLKDIV_MASK		(0x7)
-
-/* Define the bits in registers CCGRx */
-#define MXC_CCM_CCGRx_CG_MASK				0x3
-#define MXC_CCM_CCGRx_MOD_OFF				0x0
-#define MXC_CCM_CCGRx_MOD_ON				0x3
-#define MXC_CCM_CCGRx_MOD_IDLE				0x1
-
-#define MXC_CCM_CCGRx_CG15_MASK				(0x3 << 30)
-#define MXC_CCM_CCGRx_CG14_MASK				(0x3 << 28)
-#define MXC_CCM_CCGRx_CG13_MASK				(0x3 << 26)
-#define MXC_CCM_CCGRx_CG12_MASK				(0x3 << 24)
-#define MXC_CCM_CCGRx_CG11_MASK				(0x3 << 22)
-#define MXC_CCM_CCGRx_CG10_MASK				(0x3 << 20)
-#define MXC_CCM_CCGRx_CG9_MASK				(0x3 << 18)
-#define MXC_CCM_CCGRx_CG8_MASK				(0x3 << 16)
-#define MXC_CCM_CCGRx_CG5_MASK				(0x3 << 10)
-#define MXC_CCM_CCGRx_CG4_MASK				(0x3 << 8)
-#define MXC_CCM_CCGRx_CG3_MASK				(0x3 << 6)
-#define MXC_CCM_CCGRx_CG2_MASK				(0x3 << 4)
-#define MXC_CCM_CCGRx_CG1_MASK				(0x3 << 2)
-#define MXC_CCM_CCGRx_CG0_MASK				(0x3 << 0)
-
-#define MXC_CCM_CCGRx_CG15_OFFSET			30
-#define MXC_CCM_CCGRx_CG14_OFFSET			28
-#define MXC_CCM_CCGRx_CG13_OFFSET			26
-#define MXC_CCM_CCGRx_CG12_OFFSET			24
-#define MXC_CCM_CCGRx_CG11_OFFSET			22
-#define MXC_CCM_CCGRx_CG10_OFFSET			20
-#define MXC_CCM_CCGRx_CG9_OFFSET			18
-#define MXC_CCM_CCGRx_CG8_OFFSET			16
-#define MXC_CCM_CCGRx_CG7_OFFSET			14
-#define MXC_CCM_CCGRx_CG6_OFFSET			12
-#define MXC_CCM_CCGRx_CG5_OFFSET			10
-#define MXC_CCM_CCGRx_CG4_OFFSET			8
-#define MXC_CCM_CCGRx_CG3_OFFSET			6
-#define MXC_CCM_CCGRx_CG2_OFFSET			4
-#define MXC_CCM_CCGRx_CG1_OFFSET			2
-#define MXC_CCM_CCGRx_CG0_OFFSET			0
-
-#define MXC_DPTC_LP_BASE	(MX51_GPC_BASE + 0x80)
-#define MXC_DPTC_GP_BASE	(MX51_GPC_BASE + 0x100)
-#define MXC_DVFS_CORE_BASE	(MX51_GPC_BASE + 0x180)
-#define MXC_DPTC_PER_BASE	(MX51_GPC_BASE + 0x1C0)
-#define MXC_PGC_IPU_BASE	(MX51_GPC_BASE + 0x220)
-#define MXC_PGC_VPU_BASE	(MX51_GPC_BASE + 0x240)
-#define MXC_PGC_GPU_BASE	(MX51_GPC_BASE + 0x260)
-#define MXC_SRPG_NEON_BASE	(MX51_GPC_BASE + 0x280)
-#define MXC_SRPG_ARM_BASE	(MX51_GPC_BASE + 0x2A0)
-#define MXC_SRPG_EMPGC0_BASE	(MX51_GPC_BASE + 0x2C0)
-#define MXC_SRPG_EMPGC1_BASE	(MX51_GPC_BASE + 0x2D0)
-#define MXC_SRPG_MEGAMIX_BASE	(MX51_GPC_BASE + 0x2E0)
-#define MXC_SRPG_EMI_BASE	(MX51_GPC_BASE + 0x300)
-
-/* CORTEXA8 platform */
-#define MXC_CORTEXA8_PLAT_PVID		(MX51_CORTEXA8_BASE + 0x0)
-#define MXC_CORTEXA8_PLAT_GPC		(MX51_CORTEXA8_BASE + 0x4)
-#define MXC_CORTEXA8_PLAT_PIC		(MX51_CORTEXA8_BASE + 0x8)
-#define MXC_CORTEXA8_PLAT_LPC		(MX51_CORTEXA8_BASE + 0xC)
-#define MXC_CORTEXA8_PLAT_NEON_LPC	(MX51_CORTEXA8_BASE + 0x10)
-#define MXC_CORTEXA8_PLAT_ICGC		(MX51_CORTEXA8_BASE + 0x14)
-#define MXC_CORTEXA8_PLAT_AMC		(MX51_CORTEXA8_BASE + 0x18)
-#define MXC_CORTEXA8_PLAT_NMC		(MX51_CORTEXA8_BASE + 0x20)
-#define MXC_CORTEXA8_PLAT_NMS		(MX51_CORTEXA8_BASE + 0x24)
-
-/* DVFS CORE */
-#define MXC_DVFSTHRS		(MXC_DVFS_CORE_BASE + 0x00)
-#define MXC_DVFSCOUN		(MXC_DVFS_CORE_BASE + 0x04)
-#define MXC_DVFSSIG1		(MXC_DVFS_CORE_BASE + 0x08)
-#define MXC_DVFSSIG0		(MXC_DVFS_CORE_BASE + 0x0C)
-#define MXC_DVFSGPC0		(MXC_DVFS_CORE_BASE + 0x10)
-#define MXC_DVFSGPC1		(MXC_DVFS_CORE_BASE + 0x14)
-#define MXC_DVFSGPBT		(MXC_DVFS_CORE_BASE + 0x18)
-#define MXC_DVFSEMAC		(MXC_DVFS_CORE_BASE + 0x1C)
-#define MXC_DVFSCNTR		(MXC_DVFS_CORE_BASE + 0x20)
-#define MXC_DVFSLTR0_0		(MXC_DVFS_CORE_BASE + 0x24)
-#define MXC_DVFSLTR0_1		(MXC_DVFS_CORE_BASE + 0x28)
-#define MXC_DVFSLTR1_0		(MXC_DVFS_CORE_BASE + 0x2C)
-#define MXC_DVFSLTR1_1		(MXC_DVFS_CORE_BASE + 0x30)
-#define MXC_DVFSPT0 		(MXC_DVFS_CORE_BASE + 0x34)
-#define MXC_DVFSPT1 		(MXC_DVFS_CORE_BASE + 0x38)
-#define MXC_DVFSPT2 		(MXC_DVFS_CORE_BASE + 0x3C)
-#define MXC_DVFSPT3 		(MXC_DVFS_CORE_BASE + 0x40)
-
-/* GPC */
-#define MXC_GPC_CNTR		(MX51_GPC_BASE + 0x0)
-#define MXC_GPC_PGR		(MX51_GPC_BASE + 0x4)
-#define MXC_GPC_VCR		(MX51_GPC_BASE + 0x8)
-#define MXC_GPC_ALL_PU		(MX51_GPC_BASE + 0xC)
-#define MXC_GPC_NEON		(MX51_GPC_BASE + 0x10)
-#define MXC_GPC_PGR_ARMPG_OFFSET	8
-#define MXC_GPC_PGR_ARMPG_MASK		(3 << 8)
-
-/* PGC */
-#define MXC_PGC_IPU_PGCR	(MXC_PGC_IPU_BASE + 0x0)
-#define MXC_PGC_IPU_PGSR	(MXC_PGC_IPU_BASE + 0xC)
-#define MXC_PGC_VPU_PGCR	(MXC_PGC_VPU_BASE + 0x0)
-#define MXC_PGC_VPU_PGSR	(MXC_PGC_VPU_BASE + 0xC)
-#define MXC_PGC_GPU_PGCR	(MXC_PGC_GPU_BASE + 0x0)
-#define MXC_PGC_GPU_PGSR	(MXC_PGC_GPU_BASE + 0xC)
-
-#define MXC_PGCR_PCR		1
-#define MXC_SRPGCR_PCR		1
-#define MXC_EMPGCR_PCR		1
-#define MXC_PGSR_PSR		1
-
-
-#define MXC_CORTEXA8_PLAT_LPC_DSM	(1 << 0)
-#define MXC_CORTEXA8_PLAT_LPC_DBG_DSM	(1 << 1)
-
-/* SRPG */
-#define MXC_SRPG_NEON_SRPGCR	(MXC_SRPG_NEON_BASE + 0x0)
-#define MXC_SRPG_NEON_PUPSCR	(MXC_SRPG_NEON_BASE + 0x4)
-#define MXC_SRPG_NEON_PDNSCR	(MXC_SRPG_NEON_BASE + 0x8)
-
-#define MXC_SRPG_ARM_SRPGCR	(MXC_SRPG_ARM_BASE + 0x0)
-#define MXC_SRPG_ARM_PUPSCR	(MXC_SRPG_ARM_BASE + 0x4)
-#define MXC_SRPG_ARM_PDNSCR	(MXC_SRPG_ARM_BASE + 0x8)
-
-#define MXC_SRPG_EMPGC0_SRPGCR	(MXC_SRPG_EMPGC0_BASE + 0x0)
-#define MXC_SRPG_EMPGC0_PUPSCR	(MXC_SRPG_EMPGC0_BASE + 0x4)
-#define MXC_SRPG_EMPGC0_PDNSCR	(MXC_SRPG_EMPGC0_BASE + 0x8)
-
-#define MXC_SRPG_EMPGC1_SRPGCR	(MXC_SRPG_EMPGC1_BASE + 0x0)
-#define MXC_SRPG_EMPGC1_PUPSCR	(MXC_SRPG_EMPGC1_BASE + 0x4)
-#define MXC_SRPG_EMPGC1_PDNSCR	(MXC_SRPG_EMPGC1_BASE + 0x8)
-
-#define MXC_SRPG_MEGAMIX_SRPGCR		(MXC_SRPG_MEGAMIX_BASE + 0x0)
-#define MXC_SRPG_MEGAMIX_PUPSCR		(MXC_SRPG_MEGAMIX_BASE + 0x4)
-#define MXC_SRPG_MEGAMIX_PDNSCR		(MXC_SRPG_MEGAMIX_BASE + 0x8)
-
-#define MXC_SRPGC_EMI_SRPGCR	(MXC_SRPGC_EMI_BASE + 0x0)
-#define MXC_SRPGC_EMI_PUPSCR	(MXC_SRPGC_EMI_BASE + 0x4)
-#define MXC_SRPGC_EMI_PDNSCR	(MXC_SRPGC_EMI_BASE + 0x8)
-
-#endif				/* __ARCH_ARM_MACH_MX51_CRM_REGS_H__ */
diff --git a/arch/arm/mach-mx5/devices-imx50.h b/arch/arm/mach-mx5/devices-imx50.h
deleted file mode 100644
index 7216667..0000000
--- a/arch/arm/mach-mx5/devices-imx50.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <mach/mx50.h>
-#include <mach/devices-common.h>
-
-extern const struct imx_imx_uart_1irq_data imx50_imx_uart_data[];
-#define imx50_add_imx_uart(id, pdata)	\
-	imx_add_imx_uart_1irq(&imx50_imx_uart_data[id], pdata)
-
-extern const struct imx_fec_data imx50_fec_data;
-#define imx50_add_fec(pdata)	\
-	imx_add_fec(&imx50_fec_data, pdata)
-
-extern const struct imx_imx_i2c_data imx50_imx_i2c_data[];
-#define imx50_add_imx_i2c(id, pdata)	\
-	imx_add_imx_i2c(&imx50_imx_i2c_data[id], pdata)
diff --git a/arch/arm/mach-mx5/devices-imx51.h b/arch/arm/mach-mx5/devices-imx51.h
deleted file mode 100644
index af488bc..0000000
--- a/arch/arm/mach-mx5/devices-imx51.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/mx51.h>
-#include <mach/devices-common.h>
-
-extern const struct imx_fec_data imx51_fec_data;
-#define imx51_add_fec(pdata)	\
-	imx_add_fec(&imx51_fec_data, pdata)
-
-extern const struct imx_fsl_usb2_udc_data imx51_fsl_usb2_udc_data;
-#define imx51_add_fsl_usb2_udc(pdata)	\
-	imx_add_fsl_usb2_udc(&imx51_fsl_usb2_udc_data, pdata)
-
-extern const struct imx_imx_i2c_data imx51_imx_i2c_data[];
-#define imx51_add_imx_i2c(id, pdata)	\
-	imx_add_imx_i2c(&imx51_imx_i2c_data[id], pdata)
-#define imx51_add_hsi2c(pdata)	\
-	imx51_add_imx_i2c(2, pdata)
-
-extern const struct imx_imx_ssi_data imx51_imx_ssi_data[];
-#define imx51_add_imx_ssi(id, pdata)	\
-	imx_add_imx_ssi(&imx51_imx_ssi_data[id], pdata)
-
-extern const struct imx_imx_uart_1irq_data imx51_imx_uart_data[];
-#define imx51_add_imx_uart(id, pdata)	\
-	imx_add_imx_uart_1irq(&imx51_imx_uart_data[id], pdata)
-
-extern const struct imx_mxc_ehci_data imx51_mxc_ehci_otg_data;
-#define imx51_add_mxc_ehci_otg(pdata)	\
-	imx_add_mxc_ehci(&imx51_mxc_ehci_otg_data, pdata)
-extern const struct imx_mxc_ehci_data imx51_mxc_ehci_hs_data[];
-#define imx51_add_mxc_ehci_hs(id, pdata)	\
-	imx_add_mxc_ehci(&imx51_mxc_ehci_hs_data[id - 1], pdata)
-
-extern const struct imx_mxc_nand_data imx51_mxc_nand_data;
-#define imx51_add_mxc_nand(pdata)	\
-	imx_add_mxc_nand(&imx51_mxc_nand_data, pdata)
-
-extern const struct imx_sdhci_esdhc_imx_data imx51_sdhci_esdhc_imx_data[];
-#define imx51_add_sdhci_esdhc_imx(id, pdata)	\
-	imx_add_sdhci_esdhc_imx(&imx51_sdhci_esdhc_imx_data[id], pdata)
-
-extern const struct imx_spi_imx_data imx51_cspi_data;
-#define imx51_add_cspi(pdata)	\
-	imx_add_spi_imx(&imx51_cspi_data, pdata)
-
-extern const struct imx_spi_imx_data imx51_ecspi_data[];
-#define imx51_add_ecspi(id, pdata)	\
-	imx_add_spi_imx(&imx51_ecspi_data[id], pdata)
-
-extern const struct imx_imx2_wdt_data imx51_imx2_wdt_data[];
-#define imx51_add_imx2_wdt(id, pdata)	\
-	imx_add_imx2_wdt(&imx51_imx2_wdt_data[id])
-
-extern const struct imx_mxc_pwm_data imx51_mxc_pwm_data[];
-#define imx51_add_mxc_pwm(id)	\
-	imx_add_mxc_pwm(&imx51_mxc_pwm_data[id])
-
-extern const struct imx_imx_keypad_data imx51_imx_keypad_data;
-#define imx51_add_imx_keypad(pdata)	\
-	imx_add_imx_keypad(&imx51_imx_keypad_data, pdata)
-
-extern const struct imx_pata_imx_data imx51_pata_imx_data;
-#define imx51_add_pata_imx() \
-	imx_add_pata_imx(&imx51_pata_imx_data)
diff --git a/arch/arm/mach-mx5/devices-imx53.h b/arch/arm/mach-mx5/devices-imx53.h
deleted file mode 100644
index 6e1e5d1..0000000
--- a/arch/arm/mach-mx5/devices-imx53.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright (C) 2010 Yong Shen. <Yong.Shen@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include <mach/mx53.h>
-#include <mach/devices-common.h>
-
-extern const struct imx_fec_data imx53_fec_data;
-#define imx53_add_fec(pdata)   \
-	imx_add_fec(&imx53_fec_data, pdata)
-
-extern const struct imx_imx_uart_1irq_data imx53_imx_uart_data[];
-#define imx53_add_imx_uart(id, pdata)	\
-	imx_add_imx_uart_1irq(&imx53_imx_uart_data[id], pdata)
-
-
-extern const struct imx_imx_i2c_data imx53_imx_i2c_data[];
-#define imx53_add_imx_i2c(id, pdata)	\
-	imx_add_imx_i2c(&imx53_imx_i2c_data[id], pdata)
-
-extern const struct imx_sdhci_esdhc_imx_data imx53_sdhci_esdhc_imx_data[];
-#define imx53_add_sdhci_esdhc_imx(id, pdata)	\
-	imx_add_sdhci_esdhc_imx(&imx53_sdhci_esdhc_imx_data[id], pdata)
-
-extern const struct imx_spi_imx_data imx53_ecspi_data[];
-#define imx53_add_ecspi(id, pdata)	\
-	imx_add_spi_imx(&imx53_ecspi_data[id], pdata)
-
-extern const struct imx_imx2_wdt_data imx53_imx2_wdt_data[];
-#define imx53_add_imx2_wdt(id, pdata)	\
-	imx_add_imx2_wdt(&imx53_imx2_wdt_data[id])
-
-extern const struct imx_imx_ssi_data imx53_imx_ssi_data[];
-#define imx53_add_imx_ssi(id, pdata)	\
-	imx_add_imx_ssi(&imx53_imx_ssi_data[id], pdata)
-
-extern const struct imx_imx_keypad_data imx53_imx_keypad_data;
-#define imx53_add_imx_keypad(pdata)	\
-	imx_add_imx_keypad(&imx53_imx_keypad_data, pdata)
-
-extern const struct imx_pata_imx_data imx53_pata_imx_data;
-#define imx53_add_pata_imx() \
-	imx_add_pata_imx(&imx53_pata_imx_data)
-
-extern struct platform_device *__init imx53_add_ahci_imx(void);
diff --git a/arch/arm/mach-mx5/efika.h b/arch/arm/mach-mx5/efika.h
deleted file mode 100644
index 014aa98..0000000
--- a/arch/arm/mach-mx5/efika.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef _EFIKA_H
-#define _EFIKA_H
-
-#define EFIKA_WLAN_EN		IMX_GPIO_NR(2, 16)
-#define EFIKA_WLAN_RESET	IMX_GPIO_NR(2, 10)
-#define EFIKA_USB_PHY_RESET	IMX_GPIO_NR(2, 9)
-
-void __init efika_board_common_init(void);
-
-#endif
diff --git a/arch/arm/mach-mx5/ehci.c b/arch/arm/mach-mx5/ehci.c
deleted file mode 100644
index c17fa13..0000000
--- a/arch/arm/mach-mx5/ehci.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- */
-
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <mach/mxc_ehci.h>
-
-#define MXC_OTG_OFFSET			0
-#define MXC_H1_OFFSET			0x200
-#define MXC_H2_OFFSET			0x400
-
-/* USB_CTRL */
-#define MXC_OTG_UCTRL_OWIE_BIT		(1 << 27)	/* OTG wakeup intr enable */
-#define MXC_OTG_UCTRL_OPM_BIT		(1 << 24)	/* OTG power mask */
-#define MXC_H1_UCTRL_H1UIE_BIT		(1 << 12)	/* Host1 ULPI interrupt enable */
-#define MXC_H1_UCTRL_H1WIE_BIT		(1 << 11)	/* HOST1 wakeup intr enable */
-#define MXC_H1_UCTRL_H1PM_BIT		(1 <<  8)		/* HOST1 power mask */
-
-/* USB_PHY_CTRL_FUNC */
-#define MXC_OTG_PHYCTRL_OC_DIS_BIT	(1 << 8)	/* OTG Disable Overcurrent Event */
-#define MXC_H1_OC_DIS_BIT		(1 << 5)	/* UH1 Disable Overcurrent Event */
-
-/* USBH2CTRL */
-#define MXC_H2_UCTRL_H2UIE_BIT		(1 << 8)
-#define MXC_H2_UCTRL_H2WIE_BIT		(1 << 7)
-#define MXC_H2_UCTRL_H2PM_BIT		(1 << 4)
-
-#define MXC_USBCMD_OFFSET		0x140
-
-/* USBCMD */
-#define MXC_UCMD_ITC_NO_THRESHOLD_MASK	(~(0xff << 16))	/* Interrupt Threshold Control */
-
-int mx51_initialize_usb_hw(int port, unsigned int flags)
-{
-	unsigned int v;
-	void __iomem *usb_base;
-	void __iomem *usbotg_base;
-	void __iomem *usbother_base;
-	int ret = 0;
-
-	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
-	if (!usb_base) {
-		printk(KERN_ERR "%s(): ioremap failed\n", __func__);
-		return -ENOMEM;
-	}
-
-	switch (port) {
-	case 0:	/* OTG port */
-		usbotg_base = usb_base + MXC_OTG_OFFSET;
-		break;
-	case 1:	/* Host 1 port */
-		usbotg_base = usb_base + MXC_H1_OFFSET;
-		break;
-	case 2: /* Host 2 port */
-		usbotg_base = usb_base + MXC_H2_OFFSET;
-		break;
-	default:
-		printk(KERN_ERR"%s no such port %d\n", __func__, port);
-		ret = -ENOENT;
-		goto error;
-	}
-	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
-	switch (port) {
-	case 0:	/*OTG port */
-		if (flags & MXC_EHCI_INTERNAL_PHY) {
-			v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
-
-			if (flags & MXC_EHCI_POWER_PINS_ENABLED) {
-				/* OC/USBPWR is not used */
-				v |= MXC_OTG_PHYCTRL_OC_DIS_BIT;
-			} else {
-				/* OC/USBPWR is used */
-				v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT;
-			}
-			__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
-
-			v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
-			if (flags & MXC_EHCI_WAKEUP_ENABLED)
-				v |= MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup enable */
-			else
-				v &= ~MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup disable */
-			if (flags & MXC_EHCI_POWER_PINS_ENABLED)
-				v |= MXC_OTG_UCTRL_OPM_BIT;
-			else
-				v &= ~MXC_OTG_UCTRL_OPM_BIT;
-			__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
-		}
-		break;
-	case 1:	/* Host 1 */
-		/*Host ULPI */
-		v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
-		if (flags & MXC_EHCI_WAKEUP_ENABLED) {
-			/* HOST1 wakeup/ULPI intr enable */
-			v |= (MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);
-		} else {
-			/* HOST1 wakeup/ULPI intr disable */
-			v &= ~(MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);
-		}
-
-		if (flags & MXC_EHCI_POWER_PINS_ENABLED)
-			v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/
-		else
-			v |= MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/
-		__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
-
-		v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
-		if (flags & MXC_EHCI_POWER_PINS_ENABLED)
-			v &= ~MXC_H1_OC_DIS_BIT; /* OC is used */
-		else
-			v |= MXC_H1_OC_DIS_BIT; /* OC is not used */
-		__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
-
-		v = __raw_readl(usbotg_base + MXC_USBCMD_OFFSET);
-		if (flags & MXC_EHCI_ITC_NO_THRESHOLD)
-			/* Interrupt Threshold Control:Immediate (no threshold) */
-			v &= MXC_UCMD_ITC_NO_THRESHOLD_MASK;
-		__raw_writel(v, usbotg_base + MXC_USBCMD_OFFSET);
-		break;
-	case 2: /* Host 2 ULPI */
-		v = __raw_readl(usbother_base + MXC_USBH2CTRL_OFFSET);
-		if (flags & MXC_EHCI_WAKEUP_ENABLED) {
-			/* HOST1 wakeup/ULPI intr enable */
-			v |= (MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT);
-		} else {
-			/* HOST1 wakeup/ULPI intr disable */
-			v &= ~(MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT);
-		}
-
-		if (flags & MXC_EHCI_POWER_PINS_ENABLED)
-			v &= ~MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/
-		else
-			v |= MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/
-		__raw_writel(v, usbother_base + MXC_USBH2CTRL_OFFSET);
-		break;
-	}
-
-error:
-	iounmap(usb_base);
-	return ret;
-}
-
diff --git a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
deleted file mode 100644
index a6a3ab8..0000000
--- a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- *
- * Copyright (C) 2010 Eric Bénard <eric@eukrea.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/i2c/tsc2007.h>
-#include <linux/leds.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-
-#include <asm/mach/arch.h>
-
-#include "devices-imx51.h"
-
-#define MBIMX51_TSC2007_GPIO	IMX_GPIO_NR(3, 30)
-#define MBIMX51_LED0		IMX_GPIO_NR(3, 5)
-#define MBIMX51_LED1		IMX_GPIO_NR(3, 6)
-#define MBIMX51_LED2		IMX_GPIO_NR(3, 7)
-#define MBIMX51_LED3		IMX_GPIO_NR(3, 8)
-
-static const struct gpio_led mbimx51_leds[] __initconst = {
-	{
-		.name			= "led0",
-		.default_trigger	= "heartbeat",
-		.active_low		= 1,
-		.gpio			= MBIMX51_LED0,
-	},
-	{
-		.name			= "led1",
-		.default_trigger	= "nand-disk",
-		.active_low		= 1,
-		.gpio			= MBIMX51_LED1,
-	},
-	{
-		.name			= "led2",
-		.default_trigger	= "mmc0",
-		.active_low		= 1,
-		.gpio			= MBIMX51_LED2,
-	},
-	{
-		.name			= "led3",
-		.default_trigger	= "default-on",
-		.active_low		= 1,
-		.gpio			= MBIMX51_LED3,
-	},
-};
-
-static const struct gpio_led_platform_data mbimx51_leds_info __initconst = {
-	.leds		= mbimx51_leds,
-	.num_leds	= ARRAY_SIZE(mbimx51_leds),
-};
-
-static iomux_v3_cfg_t mbimx51_pads[] = {
-	/* UART2 */
-	MX51_PAD_UART2_RXD__UART2_RXD,
-	MX51_PAD_UART2_TXD__UART2_TXD,
-
-	/* UART3 */
-	MX51_PAD_UART3_RXD__UART3_RXD,
-	MX51_PAD_UART3_TXD__UART3_TXD,
-	MX51_PAD_KEY_COL4__UART3_RTS,
-	MX51_PAD_KEY_COL5__UART3_CTS,
-
-	/* TSC2007 IRQ */
-	MX51_PAD_NANDF_D10__GPIO3_30,
-
-	/* LEDS */
-	MX51_PAD_DISPB2_SER_DIN__GPIO3_5,
-	MX51_PAD_DISPB2_SER_DIO__GPIO3_6,
-	MX51_PAD_DISPB2_SER_CLK__GPIO3_7,
-	MX51_PAD_DISPB2_SER_RS__GPIO3_8,
-
-	/* KPP */
-	MX51_PAD_KEY_ROW0__KEY_ROW0,
-	MX51_PAD_KEY_ROW1__KEY_ROW1,
-	MX51_PAD_KEY_ROW2__KEY_ROW2,
-	MX51_PAD_KEY_ROW3__KEY_ROW3,
-	MX51_PAD_KEY_COL0__KEY_COL0,
-	MX51_PAD_KEY_COL1__KEY_COL1,
-	MX51_PAD_KEY_COL2__KEY_COL2,
-	MX51_PAD_KEY_COL3__KEY_COL3,
-
-	/* SD 1 */
-	MX51_PAD_SD1_CMD__SD1_CMD,
-	MX51_PAD_SD1_CLK__SD1_CLK,
-	MX51_PAD_SD1_DATA0__SD1_DATA0,
-	MX51_PAD_SD1_DATA1__SD1_DATA1,
-	MX51_PAD_SD1_DATA2__SD1_DATA2,
-	MX51_PAD_SD1_DATA3__SD1_DATA3,
-
-	/* SD 2 */
-	MX51_PAD_SD2_CMD__SD2_CMD,
-	MX51_PAD_SD2_CLK__SD2_CLK,
-	MX51_PAD_SD2_DATA0__SD2_DATA0,
-	MX51_PAD_SD2_DATA1__SD2_DATA1,
-	MX51_PAD_SD2_DATA2__SD2_DATA2,
-	MX51_PAD_SD2_DATA3__SD2_DATA3,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static int mbimx51_keymap[] = {
-	KEY(0, 0, KEY_1),
-	KEY(0, 1, KEY_2),
-	KEY(0, 2, KEY_3),
-	KEY(0, 3, KEY_UP),
-
-	KEY(1, 0, KEY_4),
-	KEY(1, 1, KEY_5),
-	KEY(1, 2, KEY_6),
-	KEY(1, 3, KEY_LEFT),
-
-	KEY(2, 0, KEY_7),
-	KEY(2, 1, KEY_8),
-	KEY(2, 2, KEY_9),
-	KEY(2, 3, KEY_RIGHT),
-
-	KEY(3, 0, KEY_0),
-	KEY(3, 1, KEY_DOWN),
-	KEY(3, 2, KEY_ESC),
-	KEY(3, 3, KEY_ENTER),
-};
-
-static const struct matrix_keymap_data mbimx51_map_data __initconst = {
-	.keymap		= mbimx51_keymap,
-	.keymap_size	= ARRAY_SIZE(mbimx51_keymap),
-};
-
-static int tsc2007_get_pendown_state(void)
-{
-	return !gpio_get_value(MBIMX51_TSC2007_GPIO);
-}
-
-struct tsc2007_platform_data tsc2007_data = {
-	.model = 2007,
-	.x_plate_ohms = 180,
-	.get_pendown_state = tsc2007_get_pendown_state,
-};
-
-static struct i2c_board_info mbimx51_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("tsc2007", 0x49),
-		.irq  = IMX_GPIO_TO_IRQ(MBIMX51_TSC2007_GPIO),
-		.platform_data = &tsc2007_data,
-	}, {
-		I2C_BOARD_INFO("tlv320aic23", 0x1a),
-	},
-};
-
-/*
- * baseboard initialization.
- */
-void __init eukrea_mbimx51_baseboard_init(void)
-{
-	mxc_iomux_v3_setup_multiple_pads(mbimx51_pads,
-					ARRAY_SIZE(mbimx51_pads));
-
-	imx51_add_imx_uart(1, NULL);
-	imx51_add_imx_uart(2, &uart_pdata);
-
-	gpio_request(MBIMX51_LED0, "LED0");
-	gpio_direction_output(MBIMX51_LED0, 1);
-	gpio_free(MBIMX51_LED0);
-	gpio_request(MBIMX51_LED1, "LED1");
-	gpio_direction_output(MBIMX51_LED1, 1);
-	gpio_free(MBIMX51_LED1);
-	gpio_request(MBIMX51_LED2, "LED2");
-	gpio_direction_output(MBIMX51_LED2, 1);
-	gpio_free(MBIMX51_LED2);
-	gpio_request(MBIMX51_LED3, "LED3");
-	gpio_direction_output(MBIMX51_LED3, 1);
-	gpio_free(MBIMX51_LED3);
-
-	gpio_led_register_device(-1, &mbimx51_leds_info);
-
-	imx51_add_imx_keypad(&mbimx51_map_data);
-
-	gpio_request(MBIMX51_TSC2007_GPIO, "tsc2007_irq");
-	gpio_direction_input(MBIMX51_TSC2007_GPIO);
-	irq_set_irq_type(gpio_to_irq(MBIMX51_TSC2007_GPIO),
-					IRQF_TRIGGER_FALLING);
-	i2c_register_board_info(1, mbimx51_i2c_devices,
-				ARRAY_SIZE(mbimx51_i2c_devices));
-
-	imx51_add_sdhci_esdhc_imx(0, NULL);
-	imx51_add_sdhci_esdhc_imx(1, NULL);
-}
diff --git a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
deleted file mode 100644
index d817fc8..0000000
--- a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * Copyright (C) 2010 Eric Benard - eric@eukrea.com
- *
- * Based on pcm970-baseboard.c which is :
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/leds.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-mx51.h>
-#include <mach/audmux.h>
-
-#include "devices-imx51.h"
-
-static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
-	/* LED */
-	MX51_PAD_NANDF_D10__GPIO3_30,
-	/* SWITCH */
-	NEW_PAD_CTRL(MX51_PAD_NANDF_D9__GPIO3_31, PAD_CTL_PUS_22K_UP |
-			PAD_CTL_PKE | PAD_CTL_SRE_FAST |
-			PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
-	/* UART2 */
-	MX51_PAD_UART2_RXD__UART2_RXD,
-	MX51_PAD_UART2_TXD__UART2_TXD,
-	/* UART 3 */
-	MX51_PAD_UART3_RXD__UART3_RXD,
-	MX51_PAD_UART3_TXD__UART3_TXD,
-	MX51_PAD_KEY_COL4__UART3_RTS,
-	MX51_PAD_KEY_COL5__UART3_CTS,
-	/* SD */
-	MX51_PAD_SD1_CMD__SD1_CMD,
-	MX51_PAD_SD1_CLK__SD1_CLK,
-	MX51_PAD_SD1_DATA0__SD1_DATA0,
-	MX51_PAD_SD1_DATA1__SD1_DATA1,
-	MX51_PAD_SD1_DATA2__SD1_DATA2,
-	MX51_PAD_SD1_DATA3__SD1_DATA3,
-	/* SD1 CD */
-	NEW_PAD_CTRL(MX51_PAD_GPIO1_0__SD1_CD, PAD_CTL_PUS_22K_UP |
-			PAD_CTL_PKE | PAD_CTL_SRE_FAST |
-			PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
-};
-
-#define GPIO_LED1	IMX_GPIO_NR(3, 30)
-#define GPIO_SWITCH1	IMX_GPIO_NR(3, 31)
-
-static const struct gpio_led eukrea_mbimxsd_leds[] __initconst = {
-	{
-		.name			= "led1",
-		.default_trigger	= "heartbeat",
-		.active_low		= 1,
-		.gpio			= GPIO_LED1,
-	},
-};
-
-static const struct gpio_led_platform_data
-		eukrea_mbimxsd_led_info __initconst = {
-	.leds		= eukrea_mbimxsd_leds,
-	.num_leds	= ARRAY_SIZE(eukrea_mbimxsd_leds),
-};
-
-static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
-	{
-		.gpio		= GPIO_SWITCH1,
-		.code		= BTN_0,
-		.desc		= "BP1",
-		.active_low	= 1,
-		.wakeup		= 1,
-	},
-};
-
-static const struct gpio_keys_platform_data
-		eukrea_mbimxsd_button_data __initconst = {
-	.buttons	= eukrea_mbimxsd_gpio_buttons,
-	.nbuttons	= ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("tlv320aic23", 0x1a),
-	},
-};
-
-/*
- * system init for baseboard usage. Will be called by cpuimx51sd init.
- *
- * Add platform devices present on this baseboard and init
- * them from CPU side as far as required to use them later on
- */
-void __init eukrea_mbimxsd51_baseboard_init(void)
-{
-	if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
-			ARRAY_SIZE(eukrea_mbimxsd_pads)))
-		printk(KERN_ERR "error setting mbimxsd pads !\n");
-
-	imx51_add_imx_uart(1, NULL);
-	imx51_add_imx_uart(2, &uart_pdata);
-
-	imx51_add_sdhci_esdhc_imx(0, NULL);
-
-	gpio_request(GPIO_LED1, "LED1");
-	gpio_direction_output(GPIO_LED1, 1);
-	gpio_free(GPIO_LED1);
-
-	gpio_request(GPIO_SWITCH1, "SWITCH1");
-	gpio_direction_input(GPIO_SWITCH1);
-	gpio_free(GPIO_SWITCH1);
-
-	i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
-				ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
-
-	gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
-	imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
-}
diff --git a/arch/arm/mach-mx5/imx51-dt.c b/arch/arm/mach-mx5/imx51-dt.c
deleted file mode 100644
index ccc6158..0000000
--- a/arch/arm/mach-mx5/imx51-dt.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <mach/common.h>
-#include <mach/mx51.h>
-
-/*
- * Lookup table for attaching a specific name and platform_data pointer to
- * devices as they get created by of_platform_populate().  Ideally this table
- * would not exist, but the current clock implementation depends on some devices
- * having a specific name.
- */
-static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = {
-	OF_DEV_AUXDATA("fsl,imx51-uart", MX51_UART1_BASE_ADDR, "imx21-uart.0", NULL),
-	OF_DEV_AUXDATA("fsl,imx51-uart", MX51_UART2_BASE_ADDR, "imx21-uart.1", NULL),
-	OF_DEV_AUXDATA("fsl,imx51-uart", MX51_UART3_BASE_ADDR, "imx21-uart.2", NULL),
-	OF_DEV_AUXDATA("fsl,imx51-fec", MX51_FEC_BASE_ADDR, "imx27-fec.0", NULL),
-	OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC1_BASE_ADDR, "sdhci-esdhc-imx51.0", NULL),
-	OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC2_BASE_ADDR, "sdhci-esdhc-imx51.1", NULL),
-	OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC3_BASE_ADDR, "sdhci-esdhc-imx51.2", NULL),
-	OF_DEV_AUXDATA("fsl,imx51-esdhc", MX51_ESDHC4_BASE_ADDR, "sdhci-esdhc-imx51.3", NULL),
-	OF_DEV_AUXDATA("fsl,imx51-ecspi", MX51_ECSPI1_BASE_ADDR, "imx51-ecspi.0", NULL),
-	OF_DEV_AUXDATA("fsl,imx51-ecspi", MX51_ECSPI2_BASE_ADDR, "imx51-ecspi.1", NULL),
-	OF_DEV_AUXDATA("fsl,imx51-cspi", MX51_CSPI_BASE_ADDR, "imx35-cspi.0", NULL),
-	OF_DEV_AUXDATA("fsl,imx51-i2c", MX51_I2C1_BASE_ADDR, "imx-i2c.0", NULL),
-	OF_DEV_AUXDATA("fsl,imx51-i2c", MX51_I2C2_BASE_ADDR, "imx-i2c.1", NULL),
-	OF_DEV_AUXDATA("fsl,imx51-sdma", MX51_SDMA_BASE_ADDR, "imx35-sdma", NULL),
-	OF_DEV_AUXDATA("fsl,imx51-wdt", MX51_WDOG1_BASE_ADDR, "imx2-wdt.0", NULL),
-	{ /* sentinel */ }
-};
-
-static void __init imx51_tzic_add_irq_domain(struct device_node *np,
-				struct device_node *interrupt_parent)
-{
-	irq_domain_add_simple(np, 0);
-}
-
-static void __init imx51_gpio_add_irq_domain(struct device_node *np,
-				struct device_node *interrupt_parent)
-{
-	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS -
-				   32 * 4; /* imx51 gets 4 gpio ports */
-
-	irq_domain_add_simple(np, gpio_irq_base);
-	gpio_irq_base += 32;
-}
-
-static const struct of_device_id imx51_irq_match[] __initconst = {
-	{ .compatible = "fsl,imx51-tzic", .data = imx51_tzic_add_irq_domain, },
-	{ .compatible = "fsl,imx51-gpio", .data = imx51_gpio_add_irq_domain, },
-	{ /* sentinel */ }
-};
-
-static const struct of_device_id imx51_iomuxc_of_match[] __initconst = {
-	{ .compatible = "fsl,imx51-iomuxc-babbage", .data = imx51_babbage_common_init, },
-	{ /* sentinel */ }
-};
-
-static void __init imx51_dt_init(void)
-{
-	struct device_node *node;
-	const struct of_device_id *of_id;
-	void (*func)(void);
-
-	of_irq_init(imx51_irq_match);
-
-	node = of_find_matching_node(NULL, imx51_iomuxc_of_match);
-	if (node) {
-		of_id = of_match_node(imx51_iomuxc_of_match, node);
-		func = of_id->data;
-		func();
-		of_node_put(node);
-	}
-
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     imx51_auxdata_lookup, NULL);
-}
-
-static void __init imx51_timer_init(void)
-{
-	mx51_clocks_init_dt();
-}
-
-static struct sys_timer imx51_timer = {
-	.init = imx51_timer_init,
-};
-
-static const char *imx51_dt_board_compat[] __initdata = {
-	"fsl,imx51-babbage",
-	NULL
-};
-
-DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)")
-	.map_io		= mx51_map_io,
-	.init_early	= imx51_init_early,
-	.init_irq	= mx51_init_irq,
-	.handle_irq	= imx51_handle_irq,
-	.timer		= &imx51_timer,
-	.init_machine	= imx51_dt_init,
-	.dt_compat	= imx51_dt_board_compat,
-MACHINE_END
diff --git a/arch/arm/mach-mx5/imx53-dt.c b/arch/arm/mach-mx5/imx53-dt.c
deleted file mode 100644
index ccaa0b8..0000000
--- a/arch/arm/mach-mx5/imx53-dt.c
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <mach/common.h>
-#include <mach/mx53.h>
-
-/*
- * Lookup table for attaching a specific name and platform_data pointer to
- * devices as they get created by of_platform_populate().  Ideally this table
- * would not exist, but the current clock implementation depends on some devices
- * having a specific name.
- */
-static const struct of_dev_auxdata imx53_auxdata_lookup[] __initconst = {
-	OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART1_BASE_ADDR, "imx21-uart.0", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART2_BASE_ADDR, "imx21-uart.1", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART3_BASE_ADDR, "imx21-uart.2", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART4_BASE_ADDR, "imx21-uart.3", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-uart", MX53_UART5_BASE_ADDR, "imx21-uart.4", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-fec", MX53_FEC_BASE_ADDR, "imx25-fec.0", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC1_BASE_ADDR, "sdhci-esdhc-imx53.0", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC2_BASE_ADDR, "sdhci-esdhc-imx53.1", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC3_BASE_ADDR, "sdhci-esdhc-imx53.2", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-esdhc", MX53_ESDHC4_BASE_ADDR, "sdhci-esdhc-imx53.3", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-ecspi", MX53_ECSPI1_BASE_ADDR, "imx51-ecspi.0", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-ecspi", MX53_ECSPI2_BASE_ADDR, "imx51-ecspi.1", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-cspi", MX53_CSPI_BASE_ADDR, "imx35-cspi.0", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C1_BASE_ADDR, "imx-i2c.0", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C2_BASE_ADDR, "imx-i2c.1", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-i2c", MX53_I2C3_BASE_ADDR, "imx-i2c.2", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-sdma", MX53_SDMA_BASE_ADDR, "imx35-sdma", NULL),
-	OF_DEV_AUXDATA("fsl,imx53-wdt", MX53_WDOG1_BASE_ADDR, "imx2-wdt.0", NULL),
-	{ /* sentinel */ }
-};
-
-static void __init imx53_tzic_add_irq_domain(struct device_node *np,
-				struct device_node *interrupt_parent)
-{
-	irq_domain_add_simple(np, 0);
-}
-
-static void __init imx53_gpio_add_irq_domain(struct device_node *np,
-				struct device_node *interrupt_parent)
-{
-	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS -
-				   32 * 7; /* imx53 gets 7 gpio ports */
-
-	irq_domain_add_simple(np, gpio_irq_base);
-	gpio_irq_base += 32;
-}
-
-static const struct of_device_id imx53_irq_match[] __initconst = {
-	{ .compatible = "fsl,imx53-tzic", .data = imx53_tzic_add_irq_domain, },
-	{ .compatible = "fsl,imx53-gpio", .data = imx53_gpio_add_irq_domain, },
-	{ /* sentinel */ }
-};
-
-static const struct of_device_id imx53_iomuxc_of_match[] __initconst = {
-	{ .compatible = "fsl,imx53-iomuxc-ard", .data = imx53_ard_common_init, },
-	{ .compatible = "fsl,imx53-iomuxc-evk", .data = imx53_evk_common_init, },
-	{ .compatible = "fsl,imx53-iomuxc-qsb", .data = imx53_qsb_common_init, },
-	{ .compatible = "fsl,imx53-iomuxc-smd", .data = imx53_smd_common_init, },
-	{ /* sentinel */ }
-};
-
-static void __init imx53_dt_init(void)
-{
-	struct device_node *node;
-	const struct of_device_id *of_id;
-	void (*func)(void);
-
-	of_irq_init(imx53_irq_match);
-
-	node = of_find_matching_node(NULL, imx53_iomuxc_of_match);
-	if (node) {
-		of_id = of_match_node(imx53_iomuxc_of_match, node);
-		func = of_id->data;
-		func();
-		of_node_put(node);
-	}
-
-	of_platform_populate(NULL, of_default_bus_match_table,
-			     imx53_auxdata_lookup, NULL);
-}
-
-static void __init imx53_timer_init(void)
-{
-	mx53_clocks_init_dt();
-}
-
-static struct sys_timer imx53_timer = {
-	.init = imx53_timer_init,
-};
-
-static const char *imx53_dt_board_compat[] __initdata = {
-	"fsl,imx53-ard",
-	"fsl,imx53-evk",
-	"fsl,imx53-qsb",
-	"fsl,imx53-smd",
-	NULL
-};
-
-DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)")
-	.map_io		= mx53_map_io,
-	.init_early	= imx53_init_early,
-	.init_irq	= mx53_init_irq,
-	.handle_irq	= imx53_handle_irq,
-	.timer		= &imx53_timer,
-	.init_machine	= imx53_dt_init,
-	.dt_compat	= imx53_dt_board_compat,
-MACHINE_END
diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c
deleted file mode 100644
index 26eacc9..0000000
--- a/arch/arm/mach-mx5/mm.c
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License.  You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- *
- * Create static mapping between physical to virtual memory.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/devices-common.h>
-#include <mach/iomux-v3.h>
-
-static void imx5_idle(void)
-{
-	mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
-}
-
-/*
- * Define the MX50 memory map.
- */
-static struct map_desc mx50_io_desc[] __initdata = {
-	imx_map_entry(MX50, TZIC, MT_DEVICE),
-	imx_map_entry(MX50, SPBA0, MT_DEVICE),
-	imx_map_entry(MX50, AIPS1, MT_DEVICE),
-	imx_map_entry(MX50, AIPS2, MT_DEVICE),
-};
-
-/*
- * Define the MX51 memory map.
- */
-static struct map_desc mx51_io_desc[] __initdata = {
-	imx_map_entry(MX51, TZIC, MT_DEVICE),
-	imx_map_entry(MX51, IRAM, MT_DEVICE),
-	imx_map_entry(MX51, AIPS1, MT_DEVICE),
-	imx_map_entry(MX51, SPBA0, MT_DEVICE),
-	imx_map_entry(MX51, AIPS2, MT_DEVICE),
-};
-
-/*
- * Define the MX53 memory map.
- */
-static struct map_desc mx53_io_desc[] __initdata = {
-	imx_map_entry(MX53, TZIC, MT_DEVICE),
-	imx_map_entry(MX53, AIPS1, MT_DEVICE),
-	imx_map_entry(MX53, SPBA0, MT_DEVICE),
-	imx_map_entry(MX53, AIPS2, MT_DEVICE),
-};
-
-/*
- * This function initializes the memory map. It is called during the
- * system startup to create static physical to virtual memory mappings
- * for the IO modules.
- */
-void __init mx50_map_io(void)
-{
-	iotable_init(mx50_io_desc, ARRAY_SIZE(mx50_io_desc));
-}
-
-void __init mx51_map_io(void)
-{
-	iotable_init(mx51_io_desc, ARRAY_SIZE(mx51_io_desc));
-}
-
-void __init mx53_map_io(void)
-{
-	iotable_init(mx53_io_desc, ARRAY_SIZE(mx53_io_desc));
-}
-
-void __init imx50_init_early(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MX50);
-	mxc_iomux_v3_init(MX50_IO_ADDRESS(MX50_IOMUXC_BASE_ADDR));
-	mxc_arch_reset_init(MX50_IO_ADDRESS(MX50_WDOG_BASE_ADDR));
-}
-
-void __init imx51_init_early(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MX51);
-	mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
-	mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
-	imx_idle = imx5_idle;
-}
-
-void __init imx53_init_early(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MX53);
-	mxc_iomux_v3_init(MX53_IO_ADDRESS(MX53_IOMUXC_BASE_ADDR));
-	mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG1_BASE_ADDR));
-}
-
-void __init mx50_init_irq(void)
-{
-	tzic_init_irq(MX50_IO_ADDRESS(MX50_TZIC_BASE_ADDR));
-}
-
-void __init mx51_init_irq(void)
-{
-	tzic_init_irq(MX51_IO_ADDRESS(MX51_TZIC_BASE_ADDR));
-}
-
-void __init mx53_init_irq(void)
-{
-	tzic_init_irq(MX53_IO_ADDRESS(MX53_TZIC_BASE_ADDR));
-}
-
-static struct sdma_script_start_addrs imx51_sdma_script __initdata = {
-	.ap_2_ap_addr = 642,
-	.uart_2_mcu_addr = 817,
-	.mcu_2_app_addr = 747,
-	.mcu_2_shp_addr = 961,
-	.ata_2_mcu_addr = 1473,
-	.mcu_2_ata_addr = 1392,
-	.app_2_per_addr = 1033,
-	.app_2_mcu_addr = 683,
-	.shp_2_per_addr = 1251,
-	.shp_2_mcu_addr = 892,
-};
-
-static struct sdma_platform_data imx51_sdma_pdata __initdata = {
-	.fw_name = "sdma-imx51.bin",
-	.script_addrs = &imx51_sdma_script,
-};
-
-static struct sdma_script_start_addrs imx53_sdma_script __initdata = {
-	.ap_2_ap_addr = 642,
-	.app_2_mcu_addr = 683,
-	.mcu_2_app_addr = 747,
-	.uart_2_mcu_addr = 817,
-	.shp_2_mcu_addr = 891,
-	.mcu_2_shp_addr = 960,
-	.uartsh_2_mcu_addr = 1032,
-	.spdif_2_mcu_addr = 1100,
-	.mcu_2_spdif_addr = 1134,
-	.firi_2_mcu_addr = 1193,
-	.mcu_2_firi_addr = 1290,
-};
-
-static struct sdma_platform_data imx53_sdma_pdata __initdata = {
-	.fw_name = "sdma-imx53.bin",
-	.script_addrs = &imx53_sdma_script,
-};
-
-void __init imx50_soc_init(void)
-{
-	/* i.mx50 has the i.mx31 type gpio */
-	mxc_register_gpio("imx31-gpio", 0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH);
-	mxc_register_gpio("imx31-gpio", 1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH);
-	mxc_register_gpio("imx31-gpio", 2, MX50_GPIO3_BASE_ADDR, SZ_16K, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH);
-	mxc_register_gpio("imx31-gpio", 3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH);
-	mxc_register_gpio("imx31-gpio", 4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH);
-	mxc_register_gpio("imx31-gpio", 5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH);
-}
-
-void __init imx51_soc_init(void)
-{
-	/* i.mx51 has the i.mx31 type gpio */
-	mxc_register_gpio("imx31-gpio", 0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_INT_GPIO1_LOW, MX51_INT_GPIO1_HIGH);
-	mxc_register_gpio("imx31-gpio", 1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_INT_GPIO2_LOW, MX51_INT_GPIO2_HIGH);
-	mxc_register_gpio("imx31-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_INT_GPIO3_LOW, MX51_INT_GPIO3_HIGH);
-	mxc_register_gpio("imx31-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_INT_GPIO4_LOW, MX51_INT_GPIO4_HIGH);
-
-	/* i.mx51 has the i.mx35 type sdma */
-	imx_add_imx_sdma("imx35-sdma", MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata);
-}
-
-void __init imx53_soc_init(void)
-{
-	/* i.mx53 has the i.mx31 type gpio */
-	mxc_register_gpio("imx31-gpio", 0, MX53_GPIO1_BASE_ADDR, SZ_16K, MX53_INT_GPIO1_LOW, MX53_INT_GPIO1_HIGH);
-	mxc_register_gpio("imx31-gpio", 1, MX53_GPIO2_BASE_ADDR, SZ_16K, MX53_INT_GPIO2_LOW, MX53_INT_GPIO2_HIGH);
-	mxc_register_gpio("imx31-gpio", 2, MX53_GPIO3_BASE_ADDR, SZ_16K, MX53_INT_GPIO3_LOW, MX53_INT_GPIO3_HIGH);
-	mxc_register_gpio("imx31-gpio", 3, MX53_GPIO4_BASE_ADDR, SZ_16K, MX53_INT_GPIO4_LOW, MX53_INT_GPIO4_HIGH);
-	mxc_register_gpio("imx31-gpio", 4, MX53_GPIO5_BASE_ADDR, SZ_16K, MX53_INT_GPIO5_LOW, MX53_INT_GPIO5_HIGH);
-	mxc_register_gpio("imx31-gpio", 5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH);
-	mxc_register_gpio("imx31-gpio", 6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH);
-
-	/* i.mx53 has the i.mx35 type sdma */
-	imx_add_imx_sdma("imx35-sdma", MX53_SDMA_BASE_ADDR, MX53_INT_SDMA, &imx53_sdma_pdata);
-}
diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-mx5/mx51_efika.c
deleted file mode 100644
index ec6ca91..0000000
--- a/arch/arm/mach-mx5/mx51_efika.c
+++ /dev/null
@@ -1,632 +0,0 @@
-/*
- * based on code from the following
- * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved.
- * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/input.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/mfd/mc13892.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/consumer.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx51.h>
-
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <mach/ulpi.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "devices-imx51.h"
-#include "efika.h"
-#include "cpu_op-mx51.h"
-
-#define MX51_USB_CTRL_1_OFFSET          0x10
-#define MX51_USB_CTRL_UH1_EXT_CLK_EN    (1 << 25)
-#define	MX51_USB_PLL_DIV_19_2_MHZ	0x01
-
-#define EFIKAMX_USB_HUB_RESET	IMX_GPIO_NR(1, 5)
-#define EFIKAMX_USBH1_STP	IMX_GPIO_NR(1, 27)
-
-#define EFIKAMX_SPI_CS0		IMX_GPIO_NR(4, 24)
-#define EFIKAMX_SPI_CS1		IMX_GPIO_NR(4, 25)
-
-#define EFIKAMX_PMIC		IMX_GPIO_NR(1, 6)
-
-static iomux_v3_cfg_t mx51efika_pads[] = {
-	/* UART1 */
-	MX51_PAD_UART1_RXD__UART1_RXD,
-	MX51_PAD_UART1_TXD__UART1_TXD,
-	MX51_PAD_UART1_RTS__UART1_RTS,
-	MX51_PAD_UART1_CTS__UART1_CTS,
-
-	/* SD 1 */
-	MX51_PAD_SD1_CMD__SD1_CMD,
-	MX51_PAD_SD1_CLK__SD1_CLK,
-	MX51_PAD_SD1_DATA0__SD1_DATA0,
-	MX51_PAD_SD1_DATA1__SD1_DATA1,
-	MX51_PAD_SD1_DATA2__SD1_DATA2,
-	MX51_PAD_SD1_DATA3__SD1_DATA3,
-
-	/* SD 2 */
-	MX51_PAD_SD2_CMD__SD2_CMD,
-	MX51_PAD_SD2_CLK__SD2_CLK,
-	MX51_PAD_SD2_DATA0__SD2_DATA0,
-	MX51_PAD_SD2_DATA1__SD2_DATA1,
-	MX51_PAD_SD2_DATA2__SD2_DATA2,
-	MX51_PAD_SD2_DATA3__SD2_DATA3,
-
-	/* SD/MMC WP/CD */
-	MX51_PAD_GPIO1_0__SD1_CD,
-	MX51_PAD_GPIO1_1__SD1_WP,
-	MX51_PAD_GPIO1_7__SD2_WP,
-	MX51_PAD_GPIO1_8__SD2_CD,
-
-	/* spi */
-	MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI,
-	MX51_PAD_CSPI1_MISO__ECSPI1_MISO,
-	MX51_PAD_CSPI1_SS0__GPIO4_24,
-	MX51_PAD_CSPI1_SS1__GPIO4_25,
-	MX51_PAD_CSPI1_RDY__ECSPI1_RDY,
-	MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
-	MX51_PAD_GPIO1_6__GPIO1_6,
-
-	/* USB HOST1 */
-	MX51_PAD_USBH1_CLK__USBH1_CLK,
-	MX51_PAD_USBH1_DIR__USBH1_DIR,
-	MX51_PAD_USBH1_NXT__USBH1_NXT,
-	MX51_PAD_USBH1_DATA0__USBH1_DATA0,
-	MX51_PAD_USBH1_DATA1__USBH1_DATA1,
-	MX51_PAD_USBH1_DATA2__USBH1_DATA2,
-	MX51_PAD_USBH1_DATA3__USBH1_DATA3,
-	MX51_PAD_USBH1_DATA4__USBH1_DATA4,
-	MX51_PAD_USBH1_DATA5__USBH1_DATA5,
-	MX51_PAD_USBH1_DATA6__USBH1_DATA6,
-	MX51_PAD_USBH1_DATA7__USBH1_DATA7,
-
-	/* USB HUB RESET */
-	MX51_PAD_GPIO1_5__GPIO1_5,
-
-	/* WLAN */
-	MX51_PAD_EIM_A22__GPIO2_16,
-	MX51_PAD_EIM_A16__GPIO2_10,
-
-	/* USB PHY RESET */
-	MX51_PAD_EIM_D27__GPIO2_9,
-};
-
-/* Serial ports */
-static const struct imxuart_platform_data uart_pdata = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-/* This function is board specific as the bit mask for the plldiv will also
- * be different for other Freescale SoCs, thus a common bitmask is not
- * possible and cannot get place in /plat-mxc/ehci.c.
- */
-static int initialize_otg_port(struct platform_device *pdev)
-{
-	u32 v;
-	void __iomem *usb_base;
-	void __iomem *usbother_base;
-	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
-	if (!usb_base)
-		return -ENOMEM;
-	usbother_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
-
-	/* Set the PHY clock to 19.2MHz */
-	v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
-	v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK;
-	v |= MX51_USB_PLL_DIV_19_2_MHZ;
-	__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET);
-	iounmap(usb_base);
-
-	mdelay(10);
-
-	return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
-}
-
-static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
-	.init   = initialize_otg_port,
-	.portsc = MXC_EHCI_UTMI_16BIT,
-};
-
-static int initialize_usbh1_port(struct platform_device *pdev)
-{
-	iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
-	iomux_v3_cfg_t usbh1gpio = MX51_PAD_USBH1_STP__GPIO1_27;
-	u32 v;
-	void __iomem *usb_base;
-	void __iomem *socregs_base;
-
-	mxc_iomux_v3_setup_pad(usbh1gpio);
-	gpio_request(EFIKAMX_USBH1_STP, "usbh1_stp");
-	gpio_direction_output(EFIKAMX_USBH1_STP, 0);
-	msleep(1);
-	gpio_set_value(EFIKAMX_USBH1_STP, 1);
-	msleep(1);
-
-	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
-	socregs_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
-
-	/* The clock for the USBH1 ULPI port will come externally */
-	/* from the PHY. */
-	v = __raw_readl(socregs_base + MX51_USB_CTRL_1_OFFSET);
-	__raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN,
-			socregs_base + MX51_USB_CTRL_1_OFFSET);
-
-	iounmap(usb_base);
-
-	gpio_free(EFIKAMX_USBH1_STP);
-	mxc_iomux_v3_setup_pad(usbh1stp);
-
-	mdelay(10);
-
-	return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD);
-}
-
-static struct mxc_usbh_platform_data usbh1_config __initdata = {
-	.init   = initialize_usbh1_port,
-	.portsc = MXC_EHCI_MODE_ULPI,
-};
-
-static void mx51_efika_hubreset(void)
-{
-	gpio_request(EFIKAMX_USB_HUB_RESET, "usb_hub_rst");
-	gpio_direction_output(EFIKAMX_USB_HUB_RESET, 1);
-	msleep(1);
-	gpio_set_value(EFIKAMX_USB_HUB_RESET, 0);
-	msleep(1);
-	gpio_set_value(EFIKAMX_USB_HUB_RESET, 1);
-}
-
-static void __init mx51_efika_usb(void)
-{
-	mx51_efika_hubreset();
-
-	/* pulling it low, means no USB at all... */
-	gpio_request(EFIKA_USB_PHY_RESET, "usb_phy_reset");
-	gpio_direction_output(EFIKA_USB_PHY_RESET, 0);
-	msleep(1);
-	gpio_set_value(EFIKA_USB_PHY_RESET, 1);
-
-	usbh1_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-			ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND);
-
-	imx51_add_mxc_ehci_otg(&dr_utmi_config);
-	if (usbh1_config.otg)
-		imx51_add_mxc_ehci_hs(1, &usbh1_config);
-}
-
-static struct mtd_partition mx51_efika_spi_nor_partitions[] = {
-	{
-	 .name = "u-boot",
-	 .offset = 0,
-	 .size = SZ_256K,
-	},
-	{
-	  .name = "config",
-	  .offset = MTDPART_OFS_APPEND,
-	  .size = SZ_64K,
-	},
-};
-
-static struct flash_platform_data mx51_efika_spi_flash_data = {
-	.name		= "spi_flash",
-	.parts		= mx51_efika_spi_nor_partitions,
-	.nr_parts	= ARRAY_SIZE(mx51_efika_spi_nor_partitions),
-	.type		= "sst25vf032b",
-};
-
-static struct regulator_consumer_supply sw1_consumers[] = {
-	{
-		.supply = "cpu_vcc",
-	}
-};
-
-static struct regulator_consumer_supply vdig_consumers[] = {
-	/* sgtl5000 */
-	REGULATOR_SUPPLY("VDDA", "1-000a"),
-	REGULATOR_SUPPLY("VDDD", "1-000a"),
-};
-
-static struct regulator_consumer_supply vvideo_consumers[] = {
-	/* sgtl5000 */
-	REGULATOR_SUPPLY("VDDIO", "1-000a"),
-};
-
-static struct regulator_consumer_supply vsd_consumers[] = {
-	REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx51.0"),
-	REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx51.1"),
-};
-
-static struct regulator_consumer_supply pwgt1_consumer[] = {
-	{
-		.supply = "pwgt1",
-	}
-};
-
-static struct regulator_consumer_supply pwgt2_consumer[] = {
-	{
-		.supply = "pwgt2",
-	}
-};
-
-static struct regulator_consumer_supply coincell_consumer[] = {
-	{
-		.supply = "coincell",
-	}
-};
-
-static struct regulator_init_data sw1_init = {
-	.constraints = {
-		.name = "SW1",
-		.min_uV = 600000,
-		.max_uV = 1375000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-		.valid_modes_mask = 0,
-		.always_on = 1,
-		.boot_on = 1,
-		.state_mem = {
-			.uV = 850000,
-			.mode = REGULATOR_MODE_NORMAL,
-			.enabled = 1,
-		},
-	},
-	.num_consumer_supplies = ARRAY_SIZE(sw1_consumers),
-	.consumer_supplies = sw1_consumers,
-};
-
-static struct regulator_init_data sw2_init = {
-	.constraints = {
-		.name = "SW2",
-		.min_uV = 900000,
-		.max_uV = 1850000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-		.always_on = 1,
-		.boot_on = 1,
-		.state_mem = {
-			.uV = 950000,
-			.mode = REGULATOR_MODE_NORMAL,
-			.enabled = 1,
-		},
-	}
-};
-
-static struct regulator_init_data sw3_init = {
-	.constraints = {
-		.name = "SW3",
-		.min_uV = 1100000,
-		.max_uV = 1850000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-		.always_on = 1,
-		.boot_on = 1,
-	}
-};
-
-static struct regulator_init_data sw4_init = {
-	.constraints = {
-		.name = "SW4",
-		.min_uV = 1100000,
-		.max_uV = 1850000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-		.always_on = 1,
-		.boot_on = 1,
-	}
-};
-
-static struct regulator_init_data viohi_init = {
-	.constraints = {
-		.name = "VIOHI",
-		.boot_on = 1,
-		.always_on = 1,
-	}
-};
-
-static struct regulator_init_data vusb_init = {
-	.constraints = {
-		.name = "VUSB",
-		.boot_on = 1,
-		.always_on = 1,
-	}
-};
-
-static struct regulator_init_data swbst_init = {
-	.constraints = {
-		.name = "SWBST",
-	}
-};
-
-static struct regulator_init_data vdig_init = {
-	.constraints = {
-		.name = "VDIG",
-		.min_uV = 1050000,
-		.max_uV = 1800000,
-		.valid_ops_mask =
-			REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
-		.boot_on = 1,
-		.always_on = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(vdig_consumers),
-	.consumer_supplies = vdig_consumers,
-};
-
-static struct regulator_init_data vpll_init = {
-	.constraints = {
-		.name = "VPLL",
-		.min_uV = 1050000,
-		.max_uV = 1800000,
-		.valid_ops_mask =
-			REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
-		.boot_on = 1,
-		.always_on = 1,
-	}
-};
-
-static struct regulator_init_data vusb2_init = {
-	.constraints = {
-		.name = "VUSB2",
-		.min_uV = 2400000,
-		.max_uV = 2775000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-		.boot_on = 1,
-		.always_on = 1,
-	}
-};
-
-static struct regulator_init_data vvideo_init = {
-	.constraints = {
-		.name = "VVIDEO",
-		.min_uV = 2775000,
-		.max_uV = 2775000,
-		.valid_ops_mask =
-			REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
-		.boot_on = 1,
-		.apply_uV = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(vvideo_consumers),
-	.consumer_supplies = vvideo_consumers,
-};
-
-static struct regulator_init_data vaudio_init = {
-	.constraints = {
-		.name = "VAUDIO",
-		.min_uV = 2300000,
-		.max_uV = 3000000,
-		.valid_ops_mask =
-			REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
-		.boot_on = 1,
-	}
-};
-
-static struct regulator_init_data vsd_init = {
-	.constraints = {
-		.name = "VSD",
-		.min_uV = 1800000,
-		.max_uV = 3150000,
-		.valid_ops_mask =
-			REGULATOR_CHANGE_VOLTAGE,
-		.boot_on = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(vsd_consumers),
-	.consumer_supplies = vsd_consumers,
-};
-
-static struct regulator_init_data vcam_init = {
-	.constraints = {
-		.name = "VCAM",
-		.min_uV = 2500000,
-		.max_uV = 3000000,
-		.valid_ops_mask =
-			REGULATOR_CHANGE_VOLTAGE |
-			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
-		.valid_modes_mask = REGULATOR_MODE_FAST | REGULATOR_MODE_NORMAL,
-		.boot_on = 1,
-	}
-};
-
-static struct regulator_init_data vgen1_init = {
-	.constraints = {
-		.name = "VGEN1",
-		.min_uV = 1200000,
-		.max_uV = 3150000,
-		.valid_ops_mask =
-			REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
-		.boot_on = 1,
-		.always_on = 1,
-	}
-};
-
-static struct regulator_init_data vgen2_init = {
-	.constraints = {
-		.name = "VGEN2",
-		.min_uV = 1200000,
-		.max_uV = 3150000,
-		.valid_ops_mask =
-			REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
-		.boot_on = 1,
-		.always_on = 1,
-	}
-};
-
-static struct regulator_init_data vgen3_init = {
-	.constraints = {
-		.name = "VGEN3",
-		.min_uV = 1800000,
-		.max_uV = 2900000,
-		.valid_ops_mask =
-			REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
-		.boot_on = 1,
-		.always_on = 1,
-	}
-};
-
-static struct regulator_init_data gpo1_init = {
-	.constraints = {
-		.name = "GPO1",
-	}
-};
-
-static struct regulator_init_data gpo2_init = {
-	.constraints = {
-		.name = "GPO2",
-	}
-};
-
-static struct regulator_init_data gpo3_init = {
-	.constraints = {
-		.name = "GPO3",
-	}
-};
-
-static struct regulator_init_data gpo4_init = {
-	.constraints = {
-		.name = "GPO4",
-	}
-};
-
-static struct regulator_init_data pwgt1_init = {
-	.constraints = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-		.boot_on        = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(pwgt1_consumer),
-	.consumer_supplies = pwgt1_consumer,
-};
-
-static struct regulator_init_data pwgt2_init = {
-	.constraints = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-		.boot_on        = 1,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(pwgt2_consumer),
-	.consumer_supplies = pwgt2_consumer,
-};
-
-static struct regulator_init_data vcoincell_init = {
-	.constraints = {
-		.name = "COINCELL",
-		.min_uV = 3000000,
-		.max_uV = 3000000,
-		.valid_ops_mask =
-			REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(coincell_consumer),
-	.consumer_supplies = coincell_consumer,
-};
-
-static struct mc13xxx_regulator_init_data mx51_efika_regulators[] = {
-	{ .id = MC13892_SW1,		.init_data =  &sw1_init },
-	{ .id = MC13892_SW2,		.init_data =  &sw2_init },
-	{ .id = MC13892_SW3,		.init_data =  &sw3_init },
-	{ .id = MC13892_SW4,		.init_data =  &sw4_init },
-	{ .id = MC13892_SWBST,		.init_data =  &swbst_init },
-	{ .id = MC13892_VIOHI,		.init_data =  &viohi_init },
-	{ .id = MC13892_VPLL,		.init_data =  &vpll_init },
-	{ .id = MC13892_VDIG,		.init_data =  &vdig_init },
-	{ .id = MC13892_VSD,		.init_data =  &vsd_init },
-	{ .id = MC13892_VUSB2,		.init_data =  &vusb2_init },
-	{ .id = MC13892_VVIDEO,		.init_data =  &vvideo_init },
-	{ .id = MC13892_VAUDIO,		.init_data =  &vaudio_init },
-	{ .id = MC13892_VCAM,		.init_data =  &vcam_init },
-	{ .id = MC13892_VGEN1,		.init_data =  &vgen1_init },
-	{ .id = MC13892_VGEN2,		.init_data =  &vgen2_init },
-	{ .id = MC13892_VGEN3,		.init_data =  &vgen3_init },
-	{ .id = MC13892_VUSB,		.init_data =  &vusb_init },
-	{ .id = MC13892_GPO1,		.init_data =  &gpo1_init },
-	{ .id = MC13892_GPO2,		.init_data =  &gpo2_init },
-	{ .id = MC13892_GPO3,		.init_data =  &gpo3_init },
-	{ .id = MC13892_GPO4,		.init_data =  &gpo4_init },
-	{ .id = MC13892_PWGT1SPI,	.init_data = &pwgt1_init },
-	{ .id = MC13892_PWGT2SPI,	.init_data = &pwgt2_init },
-	{ .id = MC13892_VCOINCELL,	.init_data = &vcoincell_init },
-};
-
-static struct mc13xxx_platform_data mx51_efika_mc13892_data = {
-	.flags = MC13XXX_USE_RTC,
-	.regulators = {
-		.num_regulators = ARRAY_SIZE(mx51_efika_regulators),
-		.regulators = mx51_efika_regulators,
-	},
-};
-
-static struct spi_board_info mx51_efika_spi_board_info[] __initdata = {
-	{
-		.modalias = "m25p80",
-		.max_speed_hz = 25000000,
-		.bus_num = 0,
-		.chip_select = 1,
-		.platform_data = &mx51_efika_spi_flash_data,
-		.irq = -1,
-	},
-	{
-		.modalias = "mc13892",
-		.max_speed_hz = 1000000,
-		.bus_num = 0,
-		.chip_select = 0,
-		.platform_data = &mx51_efika_mc13892_data,
-		.irq = IMX_GPIO_TO_IRQ(EFIKAMX_PMIC),
-	},
-};
-
-static int mx51_efika_spi_cs[] = {
-	EFIKAMX_SPI_CS0,
-	EFIKAMX_SPI_CS1,
-};
-
-static const struct spi_imx_master mx51_efika_spi_pdata __initconst = {
-	.chipselect     = mx51_efika_spi_cs,
-	.num_chipselect = ARRAY_SIZE(mx51_efika_spi_cs),
-};
-
-void __init efika_board_common_init(void)
-{
-	mxc_iomux_v3_setup_multiple_pads(mx51efika_pads,
-					ARRAY_SIZE(mx51efika_pads));
-	imx51_add_imx_uart(0, &uart_pdata);
-	mx51_efika_usb();
-
-	/* FIXME: comes from original code. check this. */
-	if (mx51_revision() < IMX_CHIP_REVISION_2_0)
-		sw2_init.constraints.state_mem.uV = 1100000;
-	else if (mx51_revision() == IMX_CHIP_REVISION_2_0) {
-		sw2_init.constraints.state_mem.uV = 1250000;
-		sw1_init.constraints.state_mem.uV = 1000000;
-	}
-	if (machine_is_mx51_efikasb())
-		vgen1_init.constraints.max_uV = 1200000;
-
-	gpio_request(EFIKAMX_PMIC, "pmic irq");
-	gpio_direction_input(EFIKAMX_PMIC);
-	spi_register_board_info(mx51_efika_spi_board_info,
-		ARRAY_SIZE(mx51_efika_spi_board_info));
-	imx51_add_ecspi(0, &mx51_efika_spi_pdata);
-
-	imx51_add_pata_imx();
-
-#if defined(CONFIG_CPU_FREQ_IMX)
-	get_cpu_op = mx51_get_cpu_op;
-#endif
-}
diff --git a/arch/arm/mach-mx5/pm-imx5.c b/arch/arm/mach-mx5/pm-imx5.c
deleted file mode 100644
index 98052fc..0000000
--- a/arch/arm/mach-mx5/pm-imx5.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- *  Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#include <linux/suspend.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include "crm_regs.h"
-
-static struct clk *gpc_dvfs_clk;
-
-static int mx5_suspend_prepare(void)
-{
-	return clk_enable(gpc_dvfs_clk);
-}
-
-static int mx5_suspend_enter(suspend_state_t state)
-{
-	switch (state) {
-	case PM_SUSPEND_MEM:
-		mx5_cpu_lp_set(STOP_POWER_OFF);
-		break;
-	case PM_SUSPEND_STANDBY:
-		mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	if (state == PM_SUSPEND_MEM) {
-		local_flush_tlb_all();
-		flush_cache_all();
-
-		/*clear the EMPGC0/1 bits */
-		__raw_writel(0, MXC_SRPG_EMPGC0_SRPGCR);
-		__raw_writel(0, MXC_SRPG_EMPGC1_SRPGCR);
-	}
-	cpu_do_idle();
-	return 0;
-}
-
-static void mx5_suspend_finish(void)
-{
-	clk_disable(gpc_dvfs_clk);
-}
-
-static int mx5_pm_valid(suspend_state_t state)
-{
-	return (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX);
-}
-
-static const struct platform_suspend_ops mx5_suspend_ops = {
-	.valid = mx5_pm_valid,
-	.prepare = mx5_suspend_prepare,
-	.enter = mx5_suspend_enter,
-	.finish = mx5_suspend_finish,
-};
-
-static int __init mx5_pm_init(void)
-{
-	if (gpc_dvfs_clk == NULL)
-		gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
-
-	if (!IS_ERR(gpc_dvfs_clk)) {
-		if (cpu_is_mx51())
-			suspend_set_ops(&mx5_suspend_ops);
-	} else
-		return -EPERM;
-
-	return 0;
-}
-device_initcall(mx5_pm_init);
diff --git a/arch/arm/mach-mx5/system.c b/arch/arm/mach-mx5/system.c
deleted file mode 100644
index 144ebeb..0000000
--- a/arch/arm/mach-mx5/system.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include "crm_regs.h"
-
-/* set cpu low power mode before WFI instruction. This function is called
-  * mx5 because it can be used for mx50, mx51, and mx53.*/
-void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
-{
-	u32 plat_lpc, arm_srpgcr, ccm_clpcr;
-	u32 empgc0, empgc1;
-	int stop_mode = 0;
-
-	/* always allow platform to issue a deep sleep mode request */
-	plat_lpc = __raw_readl(MXC_CORTEXA8_PLAT_LPC) &
-	    ~(MXC_CORTEXA8_PLAT_LPC_DSM);
-	ccm_clpcr = __raw_readl(MXC_CCM_CLPCR) & ~(MXC_CCM_CLPCR_LPM_MASK);
-	arm_srpgcr = __raw_readl(MXC_SRPG_ARM_SRPGCR) & ~(MXC_SRPGCR_PCR);
-	empgc0 = __raw_readl(MXC_SRPG_EMPGC0_SRPGCR) & ~(MXC_SRPGCR_PCR);
-	empgc1 = __raw_readl(MXC_SRPG_EMPGC1_SRPGCR) & ~(MXC_SRPGCR_PCR);
-
-	switch (mode) {
-	case WAIT_CLOCKED:
-		break;
-	case WAIT_UNCLOCKED:
-		ccm_clpcr |= 0x1 << MXC_CCM_CLPCR_LPM_OFFSET;
-		break;
-	case WAIT_UNCLOCKED_POWER_OFF:
-	case STOP_POWER_OFF:
-		plat_lpc |= MXC_CORTEXA8_PLAT_LPC_DSM
-			    | MXC_CORTEXA8_PLAT_LPC_DBG_DSM;
-		if (mode == WAIT_UNCLOCKED_POWER_OFF) {
-			ccm_clpcr |= 0x1 << MXC_CCM_CLPCR_LPM_OFFSET;
-			ccm_clpcr &= ~MXC_CCM_CLPCR_VSTBY;
-			ccm_clpcr &= ~MXC_CCM_CLPCR_SBYOS;
-			stop_mode = 0;
-		} else {
-			ccm_clpcr |= 0x2 << MXC_CCM_CLPCR_LPM_OFFSET;
-			ccm_clpcr |= 0x3 << MXC_CCM_CLPCR_STBY_COUNT_OFFSET;
-			ccm_clpcr |= MXC_CCM_CLPCR_VSTBY;
-			ccm_clpcr |= MXC_CCM_CLPCR_SBYOS;
-			stop_mode = 1;
-		}
-		arm_srpgcr |= MXC_SRPGCR_PCR;
-
-		if (tzic_enable_wake(1) != 0)
-			return;
-		break;
-	case STOP_POWER_ON:
-		ccm_clpcr |= 0x2 << MXC_CCM_CLPCR_LPM_OFFSET;
-		break;
-	default:
-		printk(KERN_WARNING "UNKNOWN cpu power mode: %d\n", mode);
-		return;
-	}
-
-	__raw_writel(plat_lpc, MXC_CORTEXA8_PLAT_LPC);
-	__raw_writel(ccm_clpcr, MXC_CCM_CLPCR);
-	__raw_writel(arm_srpgcr, MXC_SRPG_ARM_SRPGCR);
-
-	/* Enable NEON SRPG for all but MX50TO1.0. */
-	if (mx50_revision() != IMX_CHIP_REVISION_1_0)
-		__raw_writel(arm_srpgcr, MXC_SRPG_NEON_SRPGCR);
-
-	if (stop_mode) {
-		empgc0 |= MXC_SRPGCR_PCR;
-		empgc1 |= MXC_SRPGCR_PCR;
-
-		__raw_writel(empgc0, MXC_SRPG_EMPGC0_SRPGCR);
-		__raw_writel(empgc1, MXC_SRPG_EMPGC1_SRPGCR);
-	}
-}