ARM: imx: rename mach dir for mx21 and mx27 to mach-imx

Finally all imx code should end up there, start with mach-mx2.  While
touching all files rename some files to use a hyphen instead of an
underscore.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

21 files changed, 0 insertions, 5726 deletions

diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig
deleted file mode 100644
index 742fd4e..0000000
--- a/arch/arm/mach-mx2/Kconfig
+++ /dev/null
@@ -1,116 +0,0 @@
-if ARCH_MX2
-
-choice
-	prompt "CPUs:"
-	default MACH_MX21
-
-config MACH_MX21
-	bool "i.MX21 support"
-	select ARCH_MXC_AUDMUX_V1
-	help
-	  This enables support for Freescale's MX2 based i.MX21 processor.
-
-config MACH_MX27
-	bool "i.MX27 support"
-	select ARCH_MXC_AUDMUX_V1
-	help
-	  This enables support for Freescale's MX2 based i.MX27 processor.
-
-endchoice
-
-comment "MX2 platforms:"
-
-config MACH_MX21ADS
-	bool "MX21ADS platform"
-	depends on MACH_MX21
-	help
-	  Include support for MX21ADS platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_MX27ADS
-	bool "MX27ADS platform"
-	depends on MACH_MX27
-	help
-	  Include support for MX27ADS platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_PCM038
-	bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
-	depends on MACH_MX27
-	select MXC_ULPI if USB_ULPI
-	help
-	  Include support for phyCORE-i.MX27 (aka pcm038) platform. This
-	  includes specific configurations for the module and its peripherals.
-
-choice
-	prompt "Baseboard"
-	depends on MACH_PCM038
-	default MACH_PCM970_BASEBOARD
-
-config MACH_PCM970_BASEBOARD
-	prompt "PHYTEC PCM970 development board"
-	bool
-	help
-	  This adds board specific devices that can be found on Phytec's
-	  PCM970 evaluation board.
-
-endchoice
-
-config MACH_CPUIMX27
-	bool "Eukrea CPUIMX27 module"
-	depends on MACH_MX27
-	help
-	  Include support for Eukrea CPUIMX27 platform. This includes
-	  specific configurations for the module and its peripherals.
-
-config MACH_EUKREA_CPUIMX27_USESDHC2
-	bool "CPUIMX27 integrates SDHC2 module"
-	depends on MACH_CPUIMX27
-	help
-	  This adds support for the internal SDHC2 used on CPUIMX27 used
-	  for wifi or eMMC.
-
-choice
-	prompt "Baseboard"
-	depends on MACH_CPUIMX27
-	default MACH_EUKREA_MBIMX27_BASEBOARD
-
-config MACH_EUKREA_MBIMX27_BASEBOARD
-	prompt "Eukrea MBIMX27 development board"
-	bool
-	help
-	  This adds board specific devices that can be found on Eukrea's
-	  MBIMX27 evaluation board.
-
-endchoice
-
-config MACH_MX27_3DS
-	bool "MX27PDK platform"
-	depends on MACH_MX27
-	help
-	  Include support for MX27PDK platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_IMX27LITE
-	bool "LogicPD MX27 LITEKIT platform"
-	depends on MACH_MX27
-	help
-	  Include support for MX27 LITEKIT platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_PCA100
-	bool "Phytec phyCARD-s (pca100)"
-	depends on MACH_MX27
-	select MXC_ULPI if USB_ULPI
-	help
-	  Include support for phyCARD-s (aka pca100) platform. This
-	  includes specific configurations for the module and its peripherals.
-
-config MACH_MXT_TD60
-	bool "Maxtrack i-MXT TD60"
-	depends on MACH_MX27
-	help
-	  Include support for i-MXT (aka td60) platform. This
-	  includes specific configurations for the module and its peripherals.
-
-endif
diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile
deleted file mode 100644
index e3254fa..0000000
--- a/arch/arm/mach-mx2/Makefile
+++ /dev/null
@@ -1,23 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y	:=  devices.o serial.o
-
-obj-$(CONFIG_MACH_MX21) += clock_imx21.o mm-imx21.o
-
-obj-$(CONFIG_MACH_MX27) += cpu_imx27.o
-obj-$(CONFIG_MACH_MX27) += clock_imx27.o mm-imx27.o
-
-obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
-obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
-obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
-obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
-obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o
-obj-$(CONFIG_MACH_IMX27LITE) += mach-imx27lite.o
-obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o
-obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
-obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
-obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o
diff --git a/arch/arm/mach-mx2/Makefile.boot b/arch/arm/mach-mx2/Makefile.boot
deleted file mode 100644
index e867398..0000000
--- a/arch/arm/mach-mx2/Makefile.boot
+++ /dev/null
@@ -1,7 +0,0 @@
-zreladdr-$(CONFIG_MACH_MX21)	:= 0xC0008000
-params_phys-$(CONFIG_MACH_MX21)	:= 0xC0000100
-initrd_phys-$(CONFIG_MACH_MX21)	:= 0xC0800000
-
-zreladdr-$(CONFIG_MACH_MX27)	:= 0xA0008000
-params_phys-$(CONFIG_MACH_MX27)	:= 0xA0000100
-initrd_phys-$(CONFIG_MACH_MX27)	:= 0xA0800000
diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c
deleted file mode 100644
index bb419ef..0000000
--- a/arch/arm/mach-mx2/clock_imx21.c
+++ /dev/null
@@ -1,1239 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- * Copyright 2008 Martin Fuzzey, mfuzzey@gmail.com
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/module.h>
-
-#include <mach/clock.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <asm/clkdev.h>
-#include <asm/div64.h>
-
-#define IO_ADDR_CCM(off)	(MX21_IO_ADDRESS(MX21_CCM_BASE_ADDR + (off)))
-
-/* Register offsets */
-#define CCM_CSCR		IO_ADDR_CCM(0x0)
-#define CCM_MPCTL0		IO_ADDR_CCM(0x4)
-#define CCM_MPCTL1		IO_ADDR_CCM(0x8)
-#define CCM_SPCTL0		IO_ADDR_CCM(0xc)
-#define CCM_SPCTL1		IO_ADDR_CCM(0x10)
-#define CCM_OSC26MCTL		IO_ADDR_CCM(0x14)
-#define CCM_PCDR0		IO_ADDR_CCM(0x18)
-#define CCM_PCDR1		IO_ADDR_CCM(0x1c)
-#define CCM_PCCR0		IO_ADDR_CCM(0x20)
-#define CCM_PCCR1		IO_ADDR_CCM(0x24)
-#define CCM_CCSR		IO_ADDR_CCM(0x28)
-#define CCM_PMCTL		IO_ADDR_CCM(0x2c)
-#define CCM_PMCOUNT		IO_ADDR_CCM(0x30)
-#define CCM_WKGDCTL		IO_ADDR_CCM(0x34)
-
-#define CCM_CSCR_PRESC_OFFSET	29
-#define CCM_CSCR_PRESC_MASK	(0x7 << CCM_CSCR_PRESC_OFFSET)
-
-#define CCM_CSCR_USB_OFFSET	26
-#define CCM_CSCR_USB_MASK	(0x7 << CCM_CSCR_USB_OFFSET)
-#define CCM_CSCR_SD_OFFSET	24
-#define CCM_CSCR_SD_MASK	(0x3 << CCM_CSCR_SD_OFFSET)
-#define CCM_CSCR_SPLLRES	(1 << 22)
-#define CCM_CSCR_MPLLRES	(1 << 21)
-#define CCM_CSCR_SSI2_OFFSET	20
-#define CCM_CSCR_SSI2		(1 << CCM_CSCR_SSI2_OFFSET)
-#define CCM_CSCR_SSI1_OFFSET	19
-#define CCM_CSCR_SSI1		(1 << CCM_CSCR_SSI1_OFFSET)
-#define CCM_CSCR_FIR_OFFSET	18
-#define CCM_CSCR_FIR		(1 << CCM_CSCR_FIR_OFFSET)
-#define CCM_CSCR_SP		(1 << 17)
-#define CCM_CSCR_MCU		(1 << 16)
-#define CCM_CSCR_BCLK_OFFSET	10
-#define CCM_CSCR_BCLK_MASK	(0xf << CCM_CSCR_BCLK_OFFSET)
-#define CCM_CSCR_IPDIV_OFFSET	9
-#define CCM_CSCR_IPDIV		(1 << CCM_CSCR_IPDIV_OFFSET)
-
-#define CCM_CSCR_OSC26MDIV	(1 << 4)
-#define CCM_CSCR_OSC26M		(1 << 3)
-#define CCM_CSCR_FPM		(1 << 2)
-#define CCM_CSCR_SPEN		(1 << 1)
-#define CCM_CSCR_MPEN		1
-
-#define CCM_MPCTL0_CPLM		(1 << 31)
-#define CCM_MPCTL0_PD_OFFSET	26
-#define CCM_MPCTL0_PD_MASK	(0xf << 26)
-#define CCM_MPCTL0_MFD_OFFSET	16
-#define CCM_MPCTL0_MFD_MASK	(0x3ff << 16)
-#define CCM_MPCTL0_MFI_OFFSET	10
-#define CCM_MPCTL0_MFI_MASK	(0xf << 10)
-#define CCM_MPCTL0_MFN_OFFSET	0
-#define CCM_MPCTL0_MFN_MASK	0x3ff
-
-#define CCM_MPCTL1_LF		(1 << 15)
-#define CCM_MPCTL1_BRMO		(1 << 6)
-
-#define CCM_SPCTL0_CPLM		(1 << 31)
-#define CCM_SPCTL0_PD_OFFSET	26
-#define CCM_SPCTL0_PD_MASK	(0xf << 26)
-#define CCM_SPCTL0_MFD_OFFSET	16
-#define CCM_SPCTL0_MFD_MASK	(0x3ff << 16)
-#define CCM_SPCTL0_MFI_OFFSET	10
-#define CCM_SPCTL0_MFI_MASK	(0xf << 10)
-#define CCM_SPCTL0_MFN_OFFSET	0
-#define CCM_SPCTL0_MFN_MASK	0x3ff
-
-#define CCM_SPCTL1_LF		(1 << 15)
-#define CCM_SPCTL1_BRMO		(1 << 6)
-
-#define CCM_OSC26MCTL_PEAK_OFFSET	16
-#define CCM_OSC26MCTL_PEAK_MASK		(0x3 << 16)
-#define CCM_OSC26MCTL_AGC_OFFSET	8
-#define CCM_OSC26MCTL_AGC_MASK		(0x3f << 8)
-#define CCM_OSC26MCTL_ANATEST_OFFSET	0
-#define CCM_OSC26MCTL_ANATEST_MASK	0x3f
-
-#define CCM_PCDR0_SSI2BAUDDIV_OFFSET	26
-#define CCM_PCDR0_SSI2BAUDDIV_MASK	(0x3f << 26)
-#define CCM_PCDR0_SSI1BAUDDIV_OFFSET	16
-#define CCM_PCDR0_SSI1BAUDDIV_MASK	(0x3f << 16)
-#define CCM_PCDR0_NFCDIV_OFFSET		12
-#define CCM_PCDR0_NFCDIV_MASK		(0xf << 12)
-#define CCM_PCDR0_48MDIV_OFFSET		5
-#define CCM_PCDR0_48MDIV_MASK		(0x7 << CCM_PCDR0_48MDIV_OFFSET)
-#define CCM_PCDR0_FIRIDIV_OFFSET	0
-#define CCM_PCDR0_FIRIDIV_MASK		0x1f
-#define CCM_PCDR1_PERDIV4_OFFSET	24
-#define CCM_PCDR1_PERDIV4_MASK		(0x3f << 24)
-#define CCM_PCDR1_PERDIV3_OFFSET	16
-#define CCM_PCDR1_PERDIV3_MASK		(0x3f << 16)
-#define CCM_PCDR1_PERDIV2_OFFSET	8
-#define CCM_PCDR1_PERDIV2_MASK		(0x3f << 8)
-#define CCM_PCDR1_PERDIV1_OFFSET	0
-#define CCM_PCDR1_PERDIV1_MASK		0x3f
-
-#define CCM_PCCR_HCLK_CSI_OFFSET	31
-#define CCM_PCCR_HCLK_CSI_REG		CCM_PCCR0
-#define CCM_PCCR_HCLK_DMA_OFFSET	30
-#define CCM_PCCR_HCLK_DMA_REG		CCM_PCCR0
-#define CCM_PCCR_HCLK_BROM_OFFSET	28
-#define CCM_PCCR_HCLK_BROM_REG		CCM_PCCR0
-#define CCM_PCCR_HCLK_EMMA_OFFSET	27
-#define CCM_PCCR_HCLK_EMMA_REG		CCM_PCCR0
-#define CCM_PCCR_HCLK_LCDC_OFFSET	26
-#define CCM_PCCR_HCLK_LCDC_REG		CCM_PCCR0
-#define CCM_PCCR_HCLK_SLCDC_OFFSET	25
-#define CCM_PCCR_HCLK_SLCDC_REG		CCM_PCCR0
-#define CCM_PCCR_HCLK_USBOTG_OFFSET	24
-#define CCM_PCCR_HCLK_USBOTG_REG	CCM_PCCR0
-#define CCM_PCCR_HCLK_BMI_OFFSET	23
-#define CCM_PCCR_BMI_MASK		(1 << CCM_PCCR_BMI_MASK)
-#define CCM_PCCR_HCLK_BMI_REG		CCM_PCCR0
-#define CCM_PCCR_PERCLK4_OFFSET		22
-#define CCM_PCCR_PERCLK4_REG		CCM_PCCR0
-#define CCM_PCCR_SLCDC_OFFSET		21
-#define CCM_PCCR_SLCDC_REG		CCM_PCCR0
-#define CCM_PCCR_FIRI_BAUD_OFFSET	20
-#define CCM_PCCR_FIRI_BAUD_MASK		(1 << CCM_PCCR_FIRI_BAUD_MASK)
-#define CCM_PCCR_FIRI_BAUD_REG		CCM_PCCR0
-#define CCM_PCCR_NFC_OFFSET		19
-#define CCM_PCCR_NFC_REG		CCM_PCCR0
-#define CCM_PCCR_LCDC_OFFSET		18
-#define CCM_PCCR_LCDC_REG		CCM_PCCR0
-#define CCM_PCCR_SSI1_BAUD_OFFSET	17
-#define CCM_PCCR_SSI1_BAUD_REG		CCM_PCCR0
-#define CCM_PCCR_SSI2_BAUD_OFFSET	16
-#define CCM_PCCR_SSI2_BAUD_REG		CCM_PCCR0
-#define CCM_PCCR_EMMA_OFFSET		15
-#define CCM_PCCR_EMMA_REG		CCM_PCCR0
-#define CCM_PCCR_USBOTG_OFFSET		14
-#define CCM_PCCR_USBOTG_REG		CCM_PCCR0
-#define CCM_PCCR_DMA_OFFSET		13
-#define CCM_PCCR_DMA_REG		CCM_PCCR0
-#define CCM_PCCR_I2C1_OFFSET		12
-#define CCM_PCCR_I2C1_REG		CCM_PCCR0
-#define CCM_PCCR_GPIO_OFFSET		11
-#define CCM_PCCR_GPIO_REG		CCM_PCCR0
-#define CCM_PCCR_SDHC2_OFFSET		10
-#define CCM_PCCR_SDHC2_REG		CCM_PCCR0
-#define CCM_PCCR_SDHC1_OFFSET		9
-#define CCM_PCCR_SDHC1_REG		CCM_PCCR0
-#define CCM_PCCR_FIRI_OFFSET		8
-#define CCM_PCCR_FIRI_MASK		(1 << CCM_PCCR_BAUD_MASK)
-#define CCM_PCCR_FIRI_REG		CCM_PCCR0
-#define CCM_PCCR_SSI2_IPG_OFFSET	7
-#define CCM_PCCR_SSI2_REG		CCM_PCCR0
-#define CCM_PCCR_SSI1_IPG_OFFSET	6
-#define CCM_PCCR_SSI1_REG		CCM_PCCR0
-#define CCM_PCCR_CSPI2_OFFSET		5
-#define	CCM_PCCR_CSPI2_REG		CCM_PCCR0
-#define CCM_PCCR_CSPI1_OFFSET		4
-#define	CCM_PCCR_CSPI1_REG		CCM_PCCR0
-#define CCM_PCCR_UART4_OFFSET		3
-#define CCM_PCCR_UART4_REG		CCM_PCCR0
-#define CCM_PCCR_UART3_OFFSET		2
-#define CCM_PCCR_UART3_REG		CCM_PCCR0
-#define CCM_PCCR_UART2_OFFSET		1
-#define CCM_PCCR_UART2_REG		CCM_PCCR0
-#define CCM_PCCR_UART1_OFFSET		0
-#define CCM_PCCR_UART1_REG		CCM_PCCR0
-
-#define CCM_PCCR_OWIRE_OFFSET		31
-#define CCM_PCCR_OWIRE_REG		CCM_PCCR1
-#define CCM_PCCR_KPP_OFFSET		30
-#define CCM_PCCR_KPP_REG		CCM_PCCR1
-#define CCM_PCCR_RTC_OFFSET		29
-#define CCM_PCCR_RTC_REG		CCM_PCCR1
-#define CCM_PCCR_PWM_OFFSET		28
-#define CCM_PCCR_PWM_REG		CCM_PCCR1
-#define CCM_PCCR_GPT3_OFFSET		27
-#define CCM_PCCR_GPT3_REG		CCM_PCCR1
-#define CCM_PCCR_GPT2_OFFSET		26
-#define CCM_PCCR_GPT2_REG		CCM_PCCR1
-#define CCM_PCCR_GPT1_OFFSET		25
-#define CCM_PCCR_GPT1_REG		CCM_PCCR1
-#define CCM_PCCR_WDT_OFFSET		24
-#define CCM_PCCR_WDT_REG		CCM_PCCR1
-#define CCM_PCCR_CSPI3_OFFSET		23
-#define	CCM_PCCR_CSPI3_REG		CCM_PCCR1
-
-#define CCM_PCCR_CSPI1_MASK		(1 << CCM_PCCR_CSPI1_OFFSET)
-#define CCM_PCCR_CSPI2_MASK		(1 << CCM_PCCR_CSPI2_OFFSET)
-#define CCM_PCCR_CSPI3_MASK		(1 << CCM_PCCR_CSPI3_OFFSET)
-#define CCM_PCCR_DMA_MASK		(1 << CCM_PCCR_DMA_OFFSET)
-#define CCM_PCCR_EMMA_MASK		(1 << CCM_PCCR_EMMA_OFFSET)
-#define CCM_PCCR_GPIO_MASK		(1 << CCM_PCCR_GPIO_OFFSET)
-#define CCM_PCCR_GPT1_MASK		(1 << CCM_PCCR_GPT1_OFFSET)
-#define CCM_PCCR_GPT2_MASK		(1 << CCM_PCCR_GPT2_OFFSET)
-#define CCM_PCCR_GPT3_MASK		(1 << CCM_PCCR_GPT3_OFFSET)
-#define CCM_PCCR_HCLK_BROM_MASK		(1 << CCM_PCCR_HCLK_BROM_OFFSET)
-#define CCM_PCCR_HCLK_CSI_MASK		(1 << CCM_PCCR_HCLK_CSI_OFFSET)
-#define CCM_PCCR_HCLK_DMA_MASK		(1 << CCM_PCCR_HCLK_DMA_OFFSET)
-#define CCM_PCCR_HCLK_EMMA_MASK		(1 << CCM_PCCR_HCLK_EMMA_OFFSET)
-#define CCM_PCCR_HCLK_LCDC_MASK		(1 << CCM_PCCR_HCLK_LCDC_OFFSET)
-#define CCM_PCCR_HCLK_SLCDC_MASK	(1 << CCM_PCCR_HCLK_SLCDC_OFFSET)
-#define CCM_PCCR_HCLK_USBOTG_MASK	(1 << CCM_PCCR_HCLK_USBOTG_OFFSET)
-#define CCM_PCCR_I2C1_MASK		(1 << CCM_PCCR_I2C1_OFFSET)
-#define CCM_PCCR_KPP_MASK		(1 << CCM_PCCR_KPP_OFFSET)
-#define CCM_PCCR_LCDC_MASK		(1 << CCM_PCCR_LCDC_OFFSET)
-#define CCM_PCCR_NFC_MASK		(1 << CCM_PCCR_NFC_OFFSET)
-#define CCM_PCCR_OWIRE_MASK		(1 << CCM_PCCR_OWIRE_OFFSET)
-#define CCM_PCCR_PERCLK4_MASK		(1 << CCM_PCCR_PERCLK4_OFFSET)
-#define CCM_PCCR_PWM_MASK		(1 << CCM_PCCR_PWM_OFFSET)
-#define CCM_PCCR_RTC_MASK		(1 << CCM_PCCR_RTC_OFFSET)
-#define CCM_PCCR_SDHC1_MASK		(1 << CCM_PCCR_SDHC1_OFFSET)
-#define CCM_PCCR_SDHC2_MASK		(1 << CCM_PCCR_SDHC2_OFFSET)
-#define CCM_PCCR_SLCDC_MASK		(1 << CCM_PCCR_SLCDC_OFFSET)
-#define CCM_PCCR_SSI1_BAUD_MASK		(1 << CCM_PCCR_SSI1_BAUD_OFFSET)
-#define CCM_PCCR_SSI1_IPG_MASK		(1 << CCM_PCCR_SSI1_IPG_OFFSET)
-#define CCM_PCCR_SSI2_BAUD_MASK		(1 << CCM_PCCR_SSI2_BAUD_OFFSET)
-#define CCM_PCCR_SSI2_IPG_MASK		(1 << CCM_PCCR_SSI2_IPG_OFFSET)
-#define CCM_PCCR_UART1_MASK		(1 << CCM_PCCR_UART1_OFFSET)
-#define CCM_PCCR_UART2_MASK		(1 << CCM_PCCR_UART2_OFFSET)
-#define CCM_PCCR_UART3_MASK		(1 << CCM_PCCR_UART3_OFFSET)
-#define CCM_PCCR_UART4_MASK		(1 << CCM_PCCR_UART4_OFFSET)
-#define CCM_PCCR_USBOTG_MASK		(1 << CCM_PCCR_USBOTG_OFFSET)
-#define CCM_PCCR_WDT_MASK		(1 << CCM_PCCR_WDT_OFFSET)
-
-#define CCM_CCSR_32KSR		(1 << 15)
-
-#define CCM_CCSR_CLKMODE1	(1 << 9)
-#define CCM_CCSR_CLKMODE0	(1 << 8)
-
-#define CCM_CCSR_CLKOSEL_OFFSET 0
-#define CCM_CCSR_CLKOSEL_MASK	0x1f
-
-#define SYS_FMCR		0x14	/* Functional Muxing Control Reg */
-#define SYS_CHIP_ID		0x00	/* The offset of CHIP ID register */
-
-static int _clk_enable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg |= 1 << clk->enable_shift;
-	__raw_writel(reg, clk->enable_reg);
-	return 0;
-}
-
-static void _clk_disable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg &= ~(1 << clk->enable_shift);
-	__raw_writel(reg, clk->enable_reg);
-}
-
-static unsigned long _clk_generic_round_rate(struct clk *clk,
-			unsigned long rate,
-			u32 max_divisor)
-{
-	u32 div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-	if (parent_rate % rate)
-		div++;
-
-	if (div > max_divisor)
-		div = max_divisor;
-
-	return parent_rate / div;
-}
-
-static int _clk_spll_enable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(CCM_CSCR);
-	reg |= CCM_CSCR_SPEN;
-	__raw_writel(reg, CCM_CSCR);
-
-	while ((__raw_readl(CCM_SPCTL1) & CCM_SPCTL1_LF) == 0)
-		;
-	return 0;
-}
-
-static void _clk_spll_disable(struct clk *clk)
-{
-	u32 reg;
-
-	reg = __raw_readl(CCM_CSCR);
-	reg &= ~CCM_CSCR_SPEN;
-	__raw_writel(reg, CCM_CSCR);
-}
-
-
-#define CSCR() (__raw_readl(CCM_CSCR))
-#define PCDR0() (__raw_readl(CCM_PCDR0))
-#define PCDR1() (__raw_readl(CCM_PCDR1))
-
-static unsigned long _clk_perclkx_round_rate(struct clk *clk,
-					     unsigned long rate)
-{
-	return _clk_generic_round_rate(clk, rate, 64);
-}
-
-static int _clk_perclkx_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 reg;
-	u32 div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	if (clk->id < 0 || clk->id > 3)
-		return -EINVAL;
-
-	div = parent_rate / rate;
-	if (div > 64 || div < 1 || ((parent_rate / div) != rate))
-		return -EINVAL;
-	div--;
-
-	reg =
-	    __raw_readl(CCM_PCDR1) & ~(CCM_PCDR1_PERDIV1_MASK <<
-				       (clk->id << 3));
-	reg |= div << (clk->id << 3);
-	__raw_writel(reg, CCM_PCDR1);
-
-	return 0;
-}
-
-static unsigned long _clk_usb_recalc(struct clk *clk)
-{
-	unsigned long usb_pdf;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	usb_pdf = (CSCR() & CCM_CSCR_USB_MASK) >> CCM_CSCR_USB_OFFSET;
-
-	return parent_rate / (usb_pdf + 1U);
-}
-
-static unsigned long _clk_usb_round_rate(struct clk *clk,
-					     unsigned long rate)
-{
-	return _clk_generic_round_rate(clk, rate, 8);
-}
-
-static int _clk_usb_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 reg;
-	u32 div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-	if (div > 8 || div < 1 || ((parent_rate / div) != rate))
-		return -EINVAL;
-	div--;
-
-	reg = CSCR() & ~CCM_CSCR_USB_MASK;
-	reg |= div << CCM_CSCR_USB_OFFSET;
-	__raw_writel(reg, CCM_CSCR);
-
-	return 0;
-}
-
-static unsigned long _clk_ssix_recalc(struct clk *clk, unsigned long pdf)
-{
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	pdf = (pdf < 2) ? 124UL : pdf;  /* MX21 & MX27 TO1 */
-
-	return 2UL * parent_rate / pdf;
-}
-
-static unsigned long _clk_ssi1_recalc(struct clk *clk)
-{
-	return _clk_ssix_recalc(clk,
-		(PCDR0() & CCM_PCDR0_SSI1BAUDDIV_MASK)
-		>> CCM_PCDR0_SSI1BAUDDIV_OFFSET);
-}
-
-static unsigned long _clk_ssi2_recalc(struct clk *clk)
-{
-	return _clk_ssix_recalc(clk,
-		(PCDR0() & CCM_PCDR0_SSI2BAUDDIV_MASK) >>
-		CCM_PCDR0_SSI2BAUDDIV_OFFSET);
-}
-
-static unsigned long _clk_nfc_recalc(struct clk *clk)
-{
-	unsigned long nfc_pdf;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	nfc_pdf = (PCDR0() & CCM_PCDR0_NFCDIV_MASK)
-		>> CCM_PCDR0_NFCDIV_OFFSET;
-
-	return parent_rate / (nfc_pdf + 1);
-}
-
-static unsigned long _clk_parent_round_rate(struct clk *clk, unsigned long rate)
-{
-	return clk->parent->round_rate(clk->parent, rate);
-}
-
-static int _clk_parent_set_rate(struct clk *clk, unsigned long rate)
-{
-	return clk->parent->set_rate(clk->parent, rate);
-}
-
-static unsigned long external_high_reference; /* in Hz */
-
-static unsigned long get_high_reference_clock_rate(struct clk *clk)
-{
-	return external_high_reference;
-}
-
-/*
- * the high frequency external clock reference
- * Default case is 26MHz.
- */
-static struct clk ckih_clk = {
-	.get_rate = get_high_reference_clock_rate,
-};
-
-static unsigned long external_low_reference; /* in Hz */
-
-static unsigned long get_low_reference_clock_rate(struct clk *clk)
-{
-	return external_low_reference;
-}
-
-/*
- * the low frequency external clock reference
- * Default case is 32.768kHz.
- */
-static struct clk ckil_clk = {
-	.get_rate = get_low_reference_clock_rate,
-};
-
-
-static unsigned long _clk_fpm_recalc(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) * 512;
-}
-
-/* Output of frequency pre multiplier */
-static struct clk fpm_clk = {
-	.parent = &ckil_clk,
-	.get_rate = _clk_fpm_recalc,
-};
-
-static unsigned long get_mpll_clk(struct clk *clk)
-{
-	uint32_t reg;
-	unsigned long ref_clk;
-	unsigned long mfi = 0, mfn = 0, mfd = 0, pdf = 0;
-	unsigned long long temp;
-
-	ref_clk = clk_get_rate(clk->parent);
-
-	reg = __raw_readl(CCM_MPCTL0);
-	pdf = (reg & CCM_MPCTL0_PD_MASK)  >> CCM_MPCTL0_PD_OFFSET;
-	mfd = (reg & CCM_MPCTL0_MFD_MASK) >> CCM_MPCTL0_MFD_OFFSET;
-	mfi = (reg & CCM_MPCTL0_MFI_MASK) >> CCM_MPCTL0_MFI_OFFSET;
-	mfn = (reg & CCM_MPCTL0_MFN_MASK) >> CCM_MPCTL0_MFN_OFFSET;
-
-	mfi = (mfi <= 5) ? 5 : mfi;
-	temp = 2LL * ref_clk * mfn;
-	do_div(temp, mfd + 1);
-	temp = 2LL * ref_clk * mfi + temp;
-	do_div(temp, pdf + 1);
-
-	return (unsigned long)temp;
-}
-
-static struct clk mpll_clk = {
-	.parent = &ckih_clk,
-	.get_rate = get_mpll_clk,
-};
-
-static unsigned long _clk_fclk_get_rate(struct clk *clk)
-{
-	unsigned long parent_rate;
-	u32 div;
-
-	div = (CSCR() & CCM_CSCR_PRESC_MASK) >> CCM_CSCR_PRESC_OFFSET;
-	parent_rate = clk_get_rate(clk->parent);
-
-	return parent_rate / (div+1);
-}
-
-static struct clk fclk_clk = {
-	.parent = &mpll_clk,
-	.get_rate = _clk_fclk_get_rate
-};
-
-static unsigned long get_spll_clk(struct clk *clk)
-{
-	uint32_t reg;
-	unsigned long ref_clk;
-	unsigned long mfi = 0, mfn = 0, mfd = 0, pdf = 0;
-	unsigned long long temp;
-
-	ref_clk = clk_get_rate(clk->parent);
-
-	reg = __raw_readl(CCM_SPCTL0);
-	pdf = (reg & CCM_SPCTL0_PD_MASK) >> CCM_SPCTL0_PD_OFFSET;
-	mfd = (reg & CCM_SPCTL0_MFD_MASK) >> CCM_SPCTL0_MFD_OFFSET;
-	mfi = (reg & CCM_SPCTL0_MFI_MASK) >> CCM_SPCTL0_MFI_OFFSET;
-	mfn = (reg & CCM_SPCTL0_MFN_MASK) >> CCM_SPCTL0_MFN_OFFSET;
-
-	mfi = (mfi <= 5) ? 5 : mfi;
-	temp = 2LL * ref_clk * mfn;
-	do_div(temp, mfd + 1);
-	temp = 2LL * ref_clk * mfi + temp;
-	do_div(temp, pdf + 1);
-
-	return (unsigned long)temp;
-}
-
-static struct clk spll_clk = {
-	.parent = &ckih_clk,
-	.get_rate = get_spll_clk,
-	.enable = _clk_spll_enable,
-	.disable = _clk_spll_disable,
-};
-
-static unsigned long get_hclk_clk(struct clk *clk)
-{
-	unsigned long rate;
-	unsigned long bclk_pdf;
-
-	bclk_pdf = (CSCR() & CCM_CSCR_BCLK_MASK)
-		>> CCM_CSCR_BCLK_OFFSET;
-
-	rate = clk_get_rate(clk->parent);
-	return rate / (bclk_pdf + 1);
-}
-
-static struct clk hclk_clk = {
-	.parent = &fclk_clk,
-	.get_rate = get_hclk_clk,
-};
-
-static unsigned long get_ipg_clk(struct clk *clk)
-{
-	unsigned long rate;
-	unsigned long ipg_pdf;
-
-	ipg_pdf = (CSCR() & CCM_CSCR_IPDIV) >> CCM_CSCR_IPDIV_OFFSET;
-
-	rate = clk_get_rate(clk->parent);
-	return rate / (ipg_pdf + 1);
-}
-
-static struct clk ipg_clk = {
-	.parent = &hclk_clk,
-	.get_rate = get_ipg_clk,
-};
-
-static unsigned long _clk_perclkx_recalc(struct clk *clk)
-{
-	unsigned long perclk_pdf;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	if (clk->id < 0 || clk->id > 3)
-		return 0;
-
-	perclk_pdf = (PCDR1() >> (clk->id << 3)) & CCM_PCDR1_PERDIV1_MASK;
-
-	return parent_rate / (perclk_pdf + 1);
-}
-
-static struct clk per_clk[] = {
-	{
-		.id = 0,
-		.parent = &mpll_clk,
-		.get_rate = _clk_perclkx_recalc,
-	}, {
-		.id = 1,
-		.parent = &mpll_clk,
-		.get_rate = _clk_perclkx_recalc,
-	}, {
-		.id = 2,
-		.parent = &mpll_clk,
-		.round_rate = _clk_perclkx_round_rate,
-		.set_rate = _clk_perclkx_set_rate,
-		.get_rate = _clk_perclkx_recalc,
-		/* Enable/Disable done via lcd_clkc[1] */
-	}, {
-		.id = 3,
-		.parent = &mpll_clk,
-		.round_rate = _clk_perclkx_round_rate,
-		.set_rate = _clk_perclkx_set_rate,
-		.get_rate = _clk_perclkx_recalc,
-		/* Enable/Disable done via csi_clk[1] */
-	},
-};
-
-static struct clk uart_ipg_clk[];
-
-static struct clk uart_clk[] = {
-	{
-		.id = 0,
-		.parent = &per_clk[0],
-		.secondary = &uart_ipg_clk[0],
-	}, {
-		.id = 1,
-		.parent = &per_clk[0],
-		.secondary = &uart_ipg_clk[1],
-	}, {
-		.id = 2,
-		.parent = &per_clk[0],
-		.secondary = &uart_ipg_clk[2],
-	}, {
-		.id = 3,
-		.parent = &per_clk[0],
-		.secondary = &uart_ipg_clk[3],
-	},
-};
-
-static struct clk uart_ipg_clk[] = {
-	{
-		.id = 0,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_UART1_REG,
-		.enable_shift = CCM_PCCR_UART1_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.id = 1,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_UART2_REG,
-		.enable_shift = CCM_PCCR_UART2_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.id = 2,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_UART3_REG,
-		.enable_shift = CCM_PCCR_UART3_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.id = 3,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_UART4_REG,
-		.enable_shift = CCM_PCCR_UART4_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk gpt_ipg_clk[];
-
-static struct clk gpt_clk[] = {
-	{
-		.id = 0,
-		.parent = &per_clk[0],
-		.secondary = &gpt_ipg_clk[0],
-	}, {
-		.id = 1,
-		.parent = &per_clk[0],
-		.secondary = &gpt_ipg_clk[1],
-	}, {
-		.id = 2,
-		.parent = &per_clk[0],
-		.secondary = &gpt_ipg_clk[2],
-	},
-};
-
-static struct clk gpt_ipg_clk[] = {
-	{
-		.id = 0,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_GPT1_REG,
-		.enable_shift = CCM_PCCR_GPT1_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.id = 1,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_GPT2_REG,
-		.enable_shift = CCM_PCCR_GPT2_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.id = 2,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_GPT3_REG,
-		.enable_shift = CCM_PCCR_GPT3_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk pwm_clk[] = {
-	{
-		.parent = &per_clk[0],
-		.secondary = &pwm_clk[1],
-	}, {
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_PWM_REG,
-		.enable_shift = CCM_PCCR_PWM_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk sdhc_ipg_clk[];
-
-static struct clk sdhc_clk[] = {
-	{
-		.id = 0,
-		.parent = &per_clk[1],
-		.secondary = &sdhc_ipg_clk[0],
-	}, {
-		.id = 1,
-		.parent = &per_clk[1],
-		.secondary = &sdhc_ipg_clk[1],
-	},
-};
-
-static struct clk sdhc_ipg_clk[] = {
-	{
-		.id = 0,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_SDHC1_REG,
-		.enable_shift = CCM_PCCR_SDHC1_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.id = 1,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_SDHC2_REG,
-		.enable_shift = CCM_PCCR_SDHC2_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk cspi_ipg_clk[];
-
-static struct clk cspi_clk[] = {
-	{
-		.id = 0,
-		.parent = &per_clk[1],
-		.secondary = &cspi_ipg_clk[0],
-	}, {
-		.id = 1,
-		.parent = &per_clk[1],
-		.secondary = &cspi_ipg_clk[1],
-	}, {
-		.id = 2,
-		.parent = &per_clk[1],
-		.secondary = &cspi_ipg_clk[2],
-	},
-};
-
-static struct clk cspi_ipg_clk[] = {
-	{
-		.id = 0,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_CSPI1_REG,
-		.enable_shift = CCM_PCCR_CSPI1_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.id = 1,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_CSPI2_REG,
-		.enable_shift = CCM_PCCR_CSPI2_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.id = 3,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_CSPI3_REG,
-		.enable_shift = CCM_PCCR_CSPI3_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk lcdc_clk[] = {
-	{
-		.parent = &per_clk[2],
-		.secondary = &lcdc_clk[1],
-		.round_rate = _clk_parent_round_rate,
-		.set_rate = _clk_parent_set_rate,
-	}, {
-		.parent = &ipg_clk,
-		.secondary = &lcdc_clk[2],
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_LCDC_REG,
-		.enable_shift = CCM_PCCR_LCDC_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.parent = &hclk_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_HCLK_LCDC_REG,
-		.enable_shift = CCM_PCCR_HCLK_LCDC_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk csi_clk[] = {
-	{
-		.parent = &per_clk[3],
-		.secondary = &csi_clk[1],
-		.round_rate = _clk_parent_round_rate,
-		.set_rate = _clk_parent_set_rate,
-	}, {
-		.parent = &hclk_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_HCLK_CSI_REG,
-		.enable_shift = CCM_PCCR_HCLK_CSI_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk usb_clk[] = {
-	{
-		.parent = &spll_clk,
-		.secondary = &usb_clk[1],
-		.get_rate = _clk_usb_recalc,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_USBOTG_REG,
-		.enable_shift = CCM_PCCR_USBOTG_OFFSET,
-		.disable = _clk_disable,
-		.round_rate = _clk_usb_round_rate,
-		.set_rate = _clk_usb_set_rate,
-	}, {
-		.parent = &hclk_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_HCLK_USBOTG_REG,
-		.enable_shift = CCM_PCCR_HCLK_USBOTG_OFFSET,
-		.disable = _clk_disable,
-	}
-};
-
-static struct clk ssi_ipg_clk[];
-
-static struct clk ssi_clk[] = {
-	{
-		.id = 0,
-		.parent = &mpll_clk,
-		.secondary = &ssi_ipg_clk[0],
-		.get_rate = _clk_ssi1_recalc,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_SSI1_BAUD_REG,
-		.enable_shift = CCM_PCCR_SSI1_BAUD_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.id = 1,
-		.parent = &mpll_clk,
-		.secondary = &ssi_ipg_clk[1],
-		.get_rate = _clk_ssi2_recalc,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_SSI2_BAUD_REG,
-		.enable_shift = CCM_PCCR_SSI2_BAUD_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk ssi_ipg_clk[] = {
-	{
-		.id = 0,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_SSI1_REG,
-		.enable_shift = CCM_PCCR_SSI1_IPG_OFFSET,
-		.disable = _clk_disable,
-	}, {
-		.id = 1,
-		.parent = &ipg_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_SSI2_REG,
-		.enable_shift = CCM_PCCR_SSI2_IPG_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-
-static struct clk nfc_clk = {
-	.parent = &fclk_clk,
-	.get_rate = _clk_nfc_recalc,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR_NFC_REG,
-	.enable_shift = CCM_PCCR_NFC_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk dma_clk[] = {
-	{
-		.parent = &hclk_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_DMA_REG,
-		.enable_shift = CCM_PCCR_DMA_OFFSET,
-		.disable = _clk_disable,
-		.secondary = &dma_clk[1],
-	},  {
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_HCLK_DMA_REG,
-		.enable_shift = CCM_PCCR_HCLK_DMA_OFFSET,
-		.disable = _clk_disable,
-	},
-};
-
-static struct clk brom_clk = {
-	.parent = &hclk_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR_HCLK_BROM_REG,
-	.enable_shift = CCM_PCCR_HCLK_BROM_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk emma_clk[] = {
-	{
-		.parent = &hclk_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_EMMA_REG,
-		.enable_shift = CCM_PCCR_EMMA_OFFSET,
-		.disable = _clk_disable,
-		.secondary = &emma_clk[1],
-	}, {
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_HCLK_EMMA_REG,
-		.enable_shift = CCM_PCCR_HCLK_EMMA_OFFSET,
-		.disable = _clk_disable,
-	}
-};
-
-static struct clk slcdc_clk[] = {
-	{
-		.parent = &hclk_clk,
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_SLCDC_REG,
-		.enable_shift = CCM_PCCR_SLCDC_OFFSET,
-		.disable = _clk_disable,
-		.secondary = &slcdc_clk[1],
-	}, {
-		.enable = _clk_enable,
-		.enable_reg = CCM_PCCR_HCLK_SLCDC_REG,
-		.enable_shift = CCM_PCCR_HCLK_SLCDC_OFFSET,
-		.disable = _clk_disable,
-	}
-};
-
-static struct clk wdog_clk = {
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR_WDT_REG,
-	.enable_shift = CCM_PCCR_WDT_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk gpio_clk = {
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR_GPIO_REG,
-	.enable_shift = CCM_PCCR_GPIO_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk i2c_clk = {
-	.id = 0,
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR_I2C1_REG,
-	.enable_shift = CCM_PCCR_I2C1_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk kpp_clk = {
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR_KPP_REG,
-	.enable_shift = CCM_PCCR_KPP_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk owire_clk = {
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR_OWIRE_REG,
-	.enable_shift = CCM_PCCR_OWIRE_OFFSET,
-	.disable = _clk_disable,
-};
-
-static struct clk rtc_clk = {
-	.parent = &ipg_clk,
-	.enable = _clk_enable,
-	.enable_reg = CCM_PCCR_RTC_REG,
-	.enable_shift = CCM_PCCR_RTC_OFFSET,
-	.disable = _clk_disable,
-};
-
-static unsigned long _clk_clko_round_rate(struct clk *clk, unsigned long rate)
-{
-	return _clk_generic_round_rate(clk, rate, 8);
-}
-
-static int _clk_clko_set_rate(struct clk *clk, unsigned long rate)
-{
-	u32 reg;
-	u32 div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-
-	if (div > 8 || div < 1 || ((parent_rate / div) != rate))
-		return -EINVAL;
-	div--;
-
-	reg = __raw_readl(CCM_PCDR0);
-
-	if (clk->parent == &usb_clk[0]) {
-		reg &= ~CCM_PCDR0_48MDIV_MASK;
-		reg |= div << CCM_PCDR0_48MDIV_OFFSET;
-	}
-	__raw_writel(reg, CCM_PCDR0);
-
-	return 0;
-}
-
-static unsigned long _clk_clko_recalc(struct clk *clk)
-{
-	u32 div = 0;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	if (clk->parent == &usb_clk[0]) /* 48M */
-		div = __raw_readl(CCM_PCDR0) & CCM_PCDR0_48MDIV_MASK
-			 >> CCM_PCDR0_48MDIV_OFFSET;
-	div++;
-
-	return parent_rate / div;
-}
-
-static struct clk clko_clk;
-
-static int _clk_clko_set_parent(struct clk *clk, struct clk *parent)
-{
-	u32 reg;
-
-	reg = __raw_readl(CCM_CCSR) & ~CCM_CCSR_CLKOSEL_MASK;
-
-	if (parent == &ckil_clk)
-		reg |= 0 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &fpm_clk)
-		reg |= 1 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &ckih_clk)
-		reg |= 2 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == mpll_clk.parent)
-		reg |= 3 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == spll_clk.parent)
-		reg |= 4 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &mpll_clk)
-		reg |= 5 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &spll_clk)
-		reg |= 6 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &fclk_clk)
-		reg |= 7 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &hclk_clk)
-		reg |= 8 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &ipg_clk)
-		reg |= 9 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &per_clk[0])
-		reg |= 0xA << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &per_clk[1])
-		reg |= 0xB << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &per_clk[2])
-		reg |= 0xC << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &per_clk[3])
-		reg |= 0xD << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &ssi_clk[0])
-		reg |= 0xE << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &ssi_clk[1])
-		reg |= 0xF << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &nfc_clk)
-		reg |= 0x10 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &usb_clk[0])
-		reg |= 0x14 << CCM_CCSR_CLKOSEL_OFFSET;
-	else if (parent == &clko_clk)
-		reg |= 0x15 << CCM_CCSR_CLKOSEL_OFFSET;
-	else
-		return -EINVAL;
-
-	__raw_writel(reg, CCM_CCSR);
-
-	return 0;
-}
-
-static struct clk clko_clk = {
-	.get_rate = _clk_clko_recalc,
-	.set_rate = _clk_clko_set_rate,
-	.round_rate = _clk_clko_round_rate,
-	.set_parent = _clk_clko_set_parent,
-};
-
-
-#define _REGISTER_CLOCK(d, n, c) \
-	{ \
-		.dev_id = d, \
-		.con_id = n, \
-		.clk = &c, \
-	},
-static struct clk_lookup lookups[] = {
-/* It's unlikely that any driver wants one of them directly:
-	_REGISTER_CLOCK(NULL, "ckih", ckih_clk)
-	_REGISTER_CLOCK(NULL, "ckil", ckil_clk)
-	_REGISTER_CLOCK(NULL, "fpm", fpm_clk)
-	_REGISTER_CLOCK(NULL, "mpll", mpll_clk)
-	_REGISTER_CLOCK(NULL, "spll", spll_clk)
-	_REGISTER_CLOCK(NULL, "fclk", fclk_clk)
-	_REGISTER_CLOCK(NULL, "hclk", hclk_clk)
-	_REGISTER_CLOCK(NULL, "ipg", ipg_clk)
-*/
-	_REGISTER_CLOCK(NULL, "perclk1", per_clk[0])
-	_REGISTER_CLOCK(NULL, "perclk2", per_clk[1])
-	_REGISTER_CLOCK(NULL, "perclk3", per_clk[2])
-	_REGISTER_CLOCK(NULL, "perclk4", per_clk[3])
-	_REGISTER_CLOCK(NULL, "clko", clko_clk)
-	_REGISTER_CLOCK("imx-uart.0", NULL, uart_clk[0])
-	_REGISTER_CLOCK("imx-uart.1", NULL, uart_clk[1])
-	_REGISTER_CLOCK("imx-uart.2", NULL, uart_clk[2])
-	_REGISTER_CLOCK("imx-uart.3", NULL, uart_clk[3])
-	_REGISTER_CLOCK(NULL, "gpt1", gpt_clk[0])
-	_REGISTER_CLOCK(NULL, "gpt1", gpt_clk[1])
-	_REGISTER_CLOCK(NULL, "gpt1", gpt_clk[2])
-	_REGISTER_CLOCK(NULL, "pwm", pwm_clk[0])
-	_REGISTER_CLOCK(NULL, "sdhc1", sdhc_clk[0])
-	_REGISTER_CLOCK(NULL, "sdhc2", sdhc_clk[1])
-	_REGISTER_CLOCK(NULL, "cspi1", cspi_clk[0])
-	_REGISTER_CLOCK(NULL, "cspi2", cspi_clk[1])
-	_REGISTER_CLOCK(NULL, "cspi3", cspi_clk[2])
-	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk[0])
-	_REGISTER_CLOCK(NULL, "csi", csi_clk[0])
-	_REGISTER_CLOCK("imx21-hcd.0", NULL, usb_clk[0])
-	_REGISTER_CLOCK(NULL, "ssi1", ssi_clk[0])
-	_REGISTER_CLOCK(NULL, "ssi2", ssi_clk[1])
-	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
-	_REGISTER_CLOCK(NULL, "dma", dma_clk[0])
-	_REGISTER_CLOCK(NULL, "brom", brom_clk)
-	_REGISTER_CLOCK(NULL, "emma", emma_clk[0])
-	_REGISTER_CLOCK(NULL, "slcdc", slcdc_clk[0])
-	_REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
-	_REGISTER_CLOCK(NULL, "gpio", gpio_clk)
-	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
-	_REGISTER_CLOCK("mxc-keypad", NULL, kpp_clk)
-	_REGISTER_CLOCK(NULL, "owire", owire_clk)
-	_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
-};
-
-/*
- * must be called very early to get information about the
- * available clock rate when the timer framework starts
- */
-int __init mx21_clocks_init(unsigned long lref, unsigned long href)
-{
-	u32 cscr;
-
-	external_low_reference = lref;
-	external_high_reference = href;
-
-	/* detect clock reference for both system PLL */
-	cscr = CSCR();
-	if (cscr & CCM_CSCR_MCU)
-		mpll_clk.parent = &ckih_clk;
-	else
-		mpll_clk.parent = &fpm_clk;
-
-	if (cscr & CCM_CSCR_SP)
-		spll_clk.parent = &ckih_clk;
-	else
-		spll_clk.parent = &fpm_clk;
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	/* Turn off all clock gates */
-	__raw_writel(0, CCM_PCCR0);
-	__raw_writel(CCM_PCCR_GPT1_MASK, CCM_PCCR1);
-
-	/* This turns of the serial PLL as well */
-	spll_clk.disable(&spll_clk);
-
-	/* This will propagate to all children and init all the clock rates. */
-	clk_enable(&per_clk[0]);
-	clk_enable(&gpio_clk);
-
-#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
-	clk_enable(&uart_clk[0]);
-#endif
-
-	mxc_timer_init(&gpt_clk[0], MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR),
-			MX21_INT_GPT1);
-	return 0;
-}
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
deleted file mode 100644
index 0f0823c..0000000
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ /dev/null
@@ -1,763 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- * Copyright 2008 Martin Fuzzey, mfuzzey@gmail.com
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/module.h>
-
-#include <asm/clkdev.h>
-#include <asm/div64.h>
-
-#include <mach/clock.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-
-#define IO_ADDR_CCM(off)	(MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR + (off)))
-
-/* Register offsets */
-#define CCM_CSCR		IO_ADDR_CCM(0x0)
-#define CCM_MPCTL0		IO_ADDR_CCM(0x4)
-#define CCM_MPCTL1		IO_ADDR_CCM(0x8)
-#define CCM_SPCTL0		IO_ADDR_CCM(0xc)
-#define CCM_SPCTL1		IO_ADDR_CCM(0x10)
-#define CCM_OSC26MCTL		IO_ADDR_CCM(0x14)
-#define CCM_PCDR0		IO_ADDR_CCM(0x18)
-#define CCM_PCDR1		IO_ADDR_CCM(0x1c)
-#define CCM_PCCR0		IO_ADDR_CCM(0x20)
-#define CCM_PCCR1		IO_ADDR_CCM(0x24)
-#define CCM_CCSR		IO_ADDR_CCM(0x28)
-#define CCM_PMCTL		IO_ADDR_CCM(0x2c)
-#define CCM_PMCOUNT		IO_ADDR_CCM(0x30)
-#define CCM_WKGDCTL		IO_ADDR_CCM(0x34)
-
-#define CCM_CSCR_UPDATE_DIS	(1 << 31)
-#define CCM_CSCR_SSI2		(1 << 23)
-#define CCM_CSCR_SSI1		(1 << 22)
-#define CCM_CSCR_VPU		(1 << 21)
-#define CCM_CSCR_MSHC           (1 << 20)
-#define CCM_CSCR_SPLLRES        (1 << 19)
-#define CCM_CSCR_MPLLRES        (1 << 18)
-#define CCM_CSCR_SP             (1 << 17)
-#define CCM_CSCR_MCU            (1 << 16)
-#define CCM_CSCR_OSC26MDIV      (1 << 4)
-#define CCM_CSCR_OSC26M         (1 << 3)
-#define CCM_CSCR_FPM            (1 << 2)
-#define CCM_CSCR_SPEN           (1 << 1)
-#define CCM_CSCR_MPEN           (1 << 0)
-
-/* i.MX27 TO 2+ */
-#define CCM_CSCR_ARM_SRC        (1 << 15)
-
-#define CCM_SPCTL1_LF           (1 << 15)
-#define CCM_SPCTL1_BRMO         (1 << 6)
-
-static struct clk mpll_main1_clk, mpll_main2_clk;
-
-static int clk_pccr_enable(struct clk *clk)
-{
-	unsigned long reg;
-
-	if (!clk->enable_reg)
-		return 0;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg |= 1 << clk->enable_shift;
-	__raw_writel(reg, clk->enable_reg);
-
-	return 0;
-}
-
-static void clk_pccr_disable(struct clk *clk)
-{
-	unsigned long reg;
-
-	if (!clk->enable_reg)
-		return;
-
-	reg = __raw_readl(clk->enable_reg);
-	reg &= ~(1 << clk->enable_shift);
-	__raw_writel(reg, clk->enable_reg);
-}
-
-static int clk_spll_enable(struct clk *clk)
-{
-	unsigned long reg;
-
-	reg = __raw_readl(CCM_CSCR);
-	reg |= CCM_CSCR_SPEN;
-	__raw_writel(reg, CCM_CSCR);
-
-	while (!(__raw_readl(CCM_SPCTL1) & CCM_SPCTL1_LF));
-
-	return 0;
-}
-
-static void clk_spll_disable(struct clk *clk)
-{
-	unsigned long reg;
-
-	reg = __raw_readl(CCM_CSCR);
-	reg &= ~CCM_CSCR_SPEN;
-	__raw_writel(reg, CCM_CSCR);
-}
-
-static int clk_cpu_set_parent(struct clk *clk, struct clk *parent)
-{
-	int cscr = __raw_readl(CCM_CSCR);
-
-	if (clk->parent == parent)
-		return 0;
-
-	if (mx27_revision() >= CHIP_REV_2_0) {
-		if (parent == &mpll_main1_clk) {
-			cscr |= CCM_CSCR_ARM_SRC;
-		} else {
-			if (parent == &mpll_main2_clk)
-				cscr &= ~CCM_CSCR_ARM_SRC;
-			else
-				return -EINVAL;
-		}
-		__raw_writel(cscr, CCM_CSCR);
-		clk->parent = parent;
-		return 0;
-	}
-	return -ENODEV;
-}
-
-static unsigned long round_rate_cpu(struct clk *clk, unsigned long rate)
-{
-	int div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-	if (parent_rate % rate)
-		div++;
-
-	if (div > 4)
-		div = 4;
-
-	return parent_rate / div;
-}
-
-static int set_rate_cpu(struct clk *clk, unsigned long rate)
-{
-	unsigned int div;
-	uint32_t reg;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-
-	if (div > 4 || div < 1 || ((parent_rate / div) != rate))
-		return -EINVAL;
-
-	div--;
-
-	reg = __raw_readl(CCM_CSCR);
-	if (mx27_revision() >= CHIP_REV_2_0) {
-		reg &= ~(3 << 12);
-		reg |= div << 12;
-		reg &= ~(CCM_CSCR_FPM | CCM_CSCR_SPEN);
-		__raw_writel(reg | CCM_CSCR_UPDATE_DIS, CCM_CSCR);
-	} else {
-		printk(KERN_ERR "Can't set CPU frequency!\n");
-	}
-
-	return 0;
-}
-
-static unsigned long round_rate_per(struct clk *clk, unsigned long rate)
-{
-	u32 div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	div = parent_rate / rate;
-	if (parent_rate % rate)
-		div++;
-
-	if (div > 64)
-		div = 64;
-
-	return parent_rate / div;
-}
-
-static int set_rate_per(struct clk *clk, unsigned long rate)
-{
-	u32 reg;
-	u32 div;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	if (clk->id < 0 || clk->id > 3)
-		return -EINVAL;
-
-	div = parent_rate / rate;
-	if (div > 64 || div < 1 || ((parent_rate / div) != rate))
-		return -EINVAL;
-	div--;
-
-	reg = __raw_readl(CCM_PCDR1) & ~(0x3f << (clk->id << 3));
-	reg |= div << (clk->id << 3);
-	__raw_writel(reg, CCM_PCDR1);
-
-	return 0;
-}
-
-static unsigned long get_rate_usb(struct clk *clk)
-{
-	unsigned long usb_pdf;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	usb_pdf = (__raw_readl(CCM_CSCR) >> 28) & 0x7;
-
-	return parent_rate / (usb_pdf + 1U);
-}
-
-static unsigned long get_rate_ssix(struct clk *clk, unsigned long pdf)
-{
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	if (mx27_revision() >= CHIP_REV_2_0)
-		pdf += 4;  /* MX27 TO2+ */
-	else
-		pdf = (pdf < 2) ? 124UL : pdf;  /* MX21 & MX27 TO1 */
-
-	return 2UL * parent_rate / pdf;
-}
-
-static unsigned long get_rate_ssi1(struct clk *clk)
-{
-	return get_rate_ssix(clk, (__raw_readl(CCM_PCDR0) >> 16) & 0x3f);
-}
-
-static unsigned long get_rate_ssi2(struct clk *clk)
-{
-	return get_rate_ssix(clk, (__raw_readl(CCM_PCDR0) >> 26) & 0x3f);
-}
-
-static unsigned long get_rate_nfc(struct clk *clk)
-{
-	unsigned long nfc_pdf;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	if (mx27_revision() >= CHIP_REV_2_0)
-		nfc_pdf = (__raw_readl(CCM_PCDR0) >> 6) & 0xf;
-	else
-		nfc_pdf = (__raw_readl(CCM_PCDR0) >> 12) & 0xf;
-
-	return parent_rate / (nfc_pdf + 1);
-}
-
-static unsigned long get_rate_vpu(struct clk *clk)
-{
-	unsigned long vpu_pdf;
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	if (mx27_revision() >= CHIP_REV_2_0) {
-		vpu_pdf = (__raw_readl(CCM_PCDR0) >> 10) & 0x3f;
-		vpu_pdf += 4;
-	} else {
-		vpu_pdf = (__raw_readl(CCM_PCDR0) >> 8) & 0xf;
-		vpu_pdf = (vpu_pdf < 2) ? 124 : vpu_pdf;
-	}
-
-	return 2UL * parent_rate / vpu_pdf;
-}
-
-static unsigned long round_rate_parent(struct clk *clk, unsigned long rate)
-{
-	return clk->parent->round_rate(clk->parent, rate);
-}
-
-static unsigned long get_rate_parent(struct clk *clk)
-{
-	return clk_get_rate(clk->parent);
-}
-
-static int set_rate_parent(struct clk *clk, unsigned long rate)
-{
-	return clk->parent->set_rate(clk->parent, rate);
-}
-
-/* in Hz */
-static unsigned long external_high_reference = 26000000;
-
-static unsigned long get_rate_high_reference(struct clk *clk)
-{
-	return external_high_reference;
-}
-
-/* in Hz */
-static unsigned long external_low_reference = 32768;
-
-static unsigned long get_rate_low_reference(struct clk *clk)
-{
-	return external_low_reference;
-}
-
-static unsigned long get_rate_fpm(struct clk *clk)
-{
-	return clk_get_rate(clk->parent) * 1024;
-}
-
-static unsigned long get_rate_mpll(struct clk *clk)
-{
-	return mxc_decode_pll(__raw_readl(CCM_MPCTL0),
-			clk_get_rate(clk->parent));
-}
-
-static unsigned long get_rate_mpll_main(struct clk *clk)
-{
-	unsigned long parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	/* i.MX27 TO2:
-	 * clk->id == 0: arm clock source path 1 which is from 2 * MPLL / 2
-	 * clk->id == 1: arm clock source path 2 which is from 2 * MPLL / 3
-	 */
-	if (mx27_revision() >= CHIP_REV_2_0 && clk->id == 1)
-		return 2UL * parent_rate / 3UL;
-
-	return parent_rate;
-}
-
-static unsigned long get_rate_spll(struct clk *clk)
-{
-	uint32_t reg;
-	unsigned long rate;
-
-	rate = clk_get_rate(clk->parent);
-
-	reg = __raw_readl(CCM_SPCTL0);
-
-	/* On TO2 we have to write the value back. Otherwise we
-	 * read 0 from this register the next time.
-	 */
-	if (mx27_revision() >= CHIP_REV_2_0)
-		__raw_writel(reg, CCM_SPCTL0);
-
-	return mxc_decode_pll(reg, rate);
-}
-
-static unsigned long get_rate_cpu(struct clk *clk)
-{
-	u32 div;
-	unsigned long rate;
-
-	if (mx27_revision() >= CHIP_REV_2_0)
-		div = (__raw_readl(CCM_CSCR) >> 12) & 0x3;
-	else
-		div = (__raw_readl(CCM_CSCR) >> 13) & 0x7;
-
-	rate = clk_get_rate(clk->parent);
-	return rate / (div + 1);
-}
-
-static unsigned long get_rate_ahb(struct clk *clk)
-{
-	unsigned long rate, bclk_pdf;
-
-	if (mx27_revision() >= CHIP_REV_2_0)
-		bclk_pdf = (__raw_readl(CCM_CSCR) >> 8) & 0x3;
-	else
-		bclk_pdf = (__raw_readl(CCM_CSCR) >> 9) & 0xf;
-
-	rate = clk_get_rate(clk->parent);
-	return rate / (bclk_pdf + 1);
-}
-
-static unsigned long get_rate_ipg(struct clk *clk)
-{
-	unsigned long rate, ipg_pdf;
-
-	if (mx27_revision() >= CHIP_REV_2_0)
-		return clk_get_rate(clk->parent);
-	else
-		ipg_pdf = (__raw_readl(CCM_CSCR) >> 8) & 1;
-
-	rate = clk_get_rate(clk->parent);
-	return rate / (ipg_pdf + 1);
-}
-
-static unsigned long get_rate_per(struct clk *clk)
-{
-	unsigned long perclk_pdf, parent_rate;
-
-	parent_rate = clk_get_rate(clk->parent);
-
-	if (clk->id < 0 || clk->id > 3)
-		return 0;
-
-	perclk_pdf = (__raw_readl(CCM_PCDR1) >> (clk->id << 3)) & 0x3f;
-
-	return parent_rate / (perclk_pdf + 1);
-}
-
-/*
- * the high frequency external clock reference
- * Default case is 26MHz. Could be changed at runtime
- * with a call to change_external_high_reference()
- */
-static struct clk ckih_clk = {
-	.get_rate	= get_rate_high_reference,
-};
-
-static struct clk mpll_clk = {
-	.parent		= &ckih_clk,
-	.get_rate	= get_rate_mpll,
-};
-
-/* For i.MX27 TO2, it is the MPLL path 1 of ARM core
- * It provides the clock source whose rate is same as MPLL
- */
-static struct clk mpll_main1_clk = {
-	.id		= 0,
-	.parent		= &mpll_clk,
-	.get_rate	= get_rate_mpll_main,
-};
-
-/* For i.MX27 TO2, it is the MPLL path 2 of ARM core
- * It provides the clock source whose rate is same MPLL * 2 / 3
- */
-static struct clk mpll_main2_clk = {
-	.id		= 1,
-	.parent		= &mpll_clk,
-	.get_rate	= get_rate_mpll_main,
-};
-
-static struct clk ahb_clk = {
-	.parent		= &mpll_main2_clk,
-	.get_rate	= get_rate_ahb,
-};
-
-static struct clk ipg_clk = {
-	.parent		= &ahb_clk,
-	.get_rate	= get_rate_ipg,
-};
-
-static struct clk cpu_clk = {
-	.parent = &mpll_main2_clk,
-	.set_parent = clk_cpu_set_parent,
-	.round_rate = round_rate_cpu,
-	.get_rate = get_rate_cpu,
-	.set_rate = set_rate_cpu,
-};
-
-static struct clk spll_clk = {
-	.parent = &ckih_clk,
-	.get_rate = get_rate_spll,
-	.enable = clk_spll_enable,
-	.disable = clk_spll_disable,
-};
-
-/*
- * the low frequency external clock reference
- * Default case is 32.768kHz.
- */
-static struct clk ckil_clk = {
-	.get_rate = get_rate_low_reference,
-};
-
-/* Output of frequency pre multiplier */
-static struct clk fpm_clk = {
-	.parent = &ckil_clk,
-	.get_rate = get_rate_fpm,
-};
-
-#define PCCR0 CCM_PCCR0
-#define PCCR1 CCM_PCCR1
-
-#define DEFINE_CLOCK(name, i, er, es, gr, s, p)		\
-	static struct clk name = {			\
-		.id		= i,			\
-		.enable_reg	= er,			\
-		.enable_shift	= es,			\
-		.get_rate	= gr,			\
-		.enable		= clk_pccr_enable,	\
-		.disable	= clk_pccr_disable,	\
-		.secondary	= s,			\
-		.parent		= p,			\
-	}
-
-#define DEFINE_CLOCK1(name, i, er, es, getsetround, s, p)	\
-	static struct clk name = {				\
-		.id		= i,				\
-		.enable_reg	= er,				\
-		.enable_shift	= es,				\
-		.get_rate	= get_rate_##getsetround,	\
-		.set_rate	= set_rate_##getsetround,	\
-		.round_rate	= round_rate_##getsetround,	\
-		.enable		= clk_pccr_enable,		\
-		.disable	= clk_pccr_disable,		\
-		.secondary	= s,				\
-		.parent		= p,				\
-	}
-
-/* Forward declaration to keep the following list in order */
-static struct clk slcdc_clk1, sahara2_clk1, rtic_clk1, fec_clk1, emma_clk1,
-		  dma_clk1, lcdc_clk2, vpu_clk1;
-
-/* All clocks we can gate through PCCRx in the order of PCCRx bits */
-DEFINE_CLOCK(ssi2_clk1,    1, PCCR0,  0, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(ssi1_clk1,    0, PCCR0,  1, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(slcdc_clk,    0, PCCR0,  2, NULL, &slcdc_clk1, &ahb_clk);
-DEFINE_CLOCK(sdhc3_clk1,   0, PCCR0,  3, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(sdhc2_clk1,   0, PCCR0,  4, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(sdhc1_clk1,   0, PCCR0,  5, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(scc_clk,      0, PCCR0,  6, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(sahara2_clk,  0, PCCR0,  7, NULL, &sahara2_clk1, &ahb_clk);
-DEFINE_CLOCK(rtic_clk,     0, PCCR0,  8, NULL, &rtic_clk1, &ahb_clk);
-DEFINE_CLOCK(rtc_clk,      0, PCCR0,  9, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(pwm_clk1,     0, PCCR0, 11, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(owire_clk,    0, PCCR0, 12, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(mstick_clk1,  0, PCCR0, 13, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(lcdc_clk1,    0, PCCR0, 14, NULL, &lcdc_clk2, &ipg_clk);
-DEFINE_CLOCK(kpp_clk,      0, PCCR0, 15, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(iim_clk,      0, PCCR0, 16, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(i2c2_clk,     1, PCCR0, 17, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(i2c1_clk,     0, PCCR0, 18, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(gpt6_clk1,    0, PCCR0, 29, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(gpt5_clk1,    0, PCCR0, 20, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(gpt4_clk1,    0, PCCR0, 21, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(gpt3_clk1,    0, PCCR0, 22, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(gpt2_clk1,    0, PCCR0, 23, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(gpt1_clk1,    0, PCCR0, 24, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(gpio_clk,     0, PCCR0, 25, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(fec_clk,      0, PCCR0, 26, NULL, &fec_clk1, &ahb_clk);
-DEFINE_CLOCK(emma_clk,     0, PCCR0, 27, NULL, &emma_clk1, &ahb_clk);
-DEFINE_CLOCK(dma_clk,      0, PCCR0, 28, NULL, &dma_clk1, &ahb_clk);
-DEFINE_CLOCK(cspi13_clk1,  0, PCCR0, 29, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(cspi2_clk1,   0, PCCR0, 30, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(cspi1_clk1,   0, PCCR0, 31, NULL, NULL, &ipg_clk);
-
-DEFINE_CLOCK(mstick_clk,   0, PCCR1,  2, NULL, &mstick_clk1, &ipg_clk);
-DEFINE_CLOCK(nfc_clk,      0, PCCR1,  3, get_rate_nfc, NULL, &cpu_clk);
-DEFINE_CLOCK(ssi2_clk,     1, PCCR1,  4, get_rate_ssi2, &ssi2_clk1, &mpll_main2_clk);
-DEFINE_CLOCK(ssi1_clk,     0, PCCR1,  5, get_rate_ssi1, &ssi1_clk1, &mpll_main2_clk);
-DEFINE_CLOCK(vpu_clk,      0, PCCR1,  6, get_rate_vpu, &vpu_clk1, &mpll_main2_clk);
-DEFINE_CLOCK1(per4_clk,    3, PCCR1,  7, per, NULL, &mpll_main2_clk);
-DEFINE_CLOCK1(per3_clk,    2, PCCR1,  8, per, NULL, &mpll_main2_clk);
-DEFINE_CLOCK1(per2_clk,    1, PCCR1,  9, per, NULL, &mpll_main2_clk);
-DEFINE_CLOCK1(per1_clk,    0, PCCR1, 10, per, NULL, &mpll_main2_clk);
-DEFINE_CLOCK(usb_clk1,     0, PCCR1, 11, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(slcdc_clk1,   0, PCCR1, 12, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(sahara2_clk1, 0, PCCR1, 13, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(rtic_clk1,    0, PCCR1, 14, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(lcdc_clk2,    0, PCCR1, 15, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(vpu_clk1,     0, PCCR1, 16, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(fec_clk1,     0, PCCR1, 17, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(emma_clk1,    0, PCCR1, 18, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(emi_clk,      0, PCCR1, 19, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(dma_clk1,     0, PCCR1, 20, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(csi_clk1,     0, PCCR1, 21, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(brom_clk,     0, PCCR1, 22, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(ata_clk,      0, PCCR1, 23, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(wdog_clk,     0, PCCR1, 24, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(usb_clk,      0, PCCR1, 25, get_rate_usb, &usb_clk1, &spll_clk);
-DEFINE_CLOCK(uart6_clk1,   0, PCCR1, 26, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(uart5_clk1,   0, PCCR1, 27, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(uart4_clk1,   0, PCCR1, 28, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(uart3_clk1,   0, PCCR1, 29, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(uart2_clk1,   0, PCCR1, 30, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(uart1_clk1,   0, PCCR1, 31, NULL, NULL, &ipg_clk);
-
-/* Clocks we cannot directly gate, but drivers need their rates */
-DEFINE_CLOCK(cspi1_clk,    0, 0,      0, NULL, &cspi1_clk1, &per2_clk);
-DEFINE_CLOCK(cspi2_clk,    1, 0,      0, NULL, &cspi2_clk1, &per2_clk);
-DEFINE_CLOCK(cspi3_clk,    2, 0,      0, NULL, &cspi13_clk1, &per2_clk);
-DEFINE_CLOCK(sdhc1_clk,    0, 0,      0, NULL, &sdhc1_clk1, &per2_clk);
-DEFINE_CLOCK(sdhc2_clk,    1, 0,      0, NULL, &sdhc2_clk1, &per2_clk);
-DEFINE_CLOCK(sdhc3_clk,    2, 0,      0, NULL, &sdhc3_clk1, &per2_clk);
-DEFINE_CLOCK(pwm_clk,      0, 0,      0, NULL, &pwm_clk1, &per1_clk);
-DEFINE_CLOCK(gpt1_clk,     0, 0,      0, NULL, &gpt1_clk1, &per1_clk);
-DEFINE_CLOCK(gpt2_clk,     1, 0,      0, NULL, &gpt2_clk1, &per1_clk);
-DEFINE_CLOCK(gpt3_clk,     2, 0,      0, NULL, &gpt3_clk1, &per1_clk);
-DEFINE_CLOCK(gpt4_clk,     3, 0,      0, NULL, &gpt4_clk1, &per1_clk);
-DEFINE_CLOCK(gpt5_clk,     4, 0,      0, NULL, &gpt5_clk1, &per1_clk);
-DEFINE_CLOCK(gpt6_clk,     5, 0,      0, NULL, &gpt6_clk1, &per1_clk);
-DEFINE_CLOCK(uart1_clk,    0, 0,      0, NULL, &uart1_clk1, &per1_clk);
-DEFINE_CLOCK(uart2_clk,    1, 0,      0, NULL, &uart2_clk1, &per1_clk);
-DEFINE_CLOCK(uart3_clk,    2, 0,      0, NULL, &uart3_clk1, &per1_clk);
-DEFINE_CLOCK(uart4_clk,    3, 0,      0, NULL, &uart4_clk1, &per1_clk);
-DEFINE_CLOCK(uart5_clk,    4, 0,      0, NULL, &uart5_clk1, &per1_clk);
-DEFINE_CLOCK(uart6_clk,    5, 0,      0, NULL, &uart6_clk1, &per1_clk);
-DEFINE_CLOCK1(lcdc_clk,    0, 0,      0, parent, &lcdc_clk1, &per3_clk);
-DEFINE_CLOCK1(csi_clk,     0, 0,      0, parent, &csi_clk1, &per4_clk);
-
-#define _REGISTER_CLOCK(d, n, c) \
-	{ \
-		.dev_id = d, \
-		.con_id = n, \
-		.clk = &c, \
-	},
-
-static struct clk_lookup lookups[] = {
-	_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
-	_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
-	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
-	_REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk)
-	_REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk)
-	_REGISTER_CLOCK("imx-uart.5", NULL, uart6_clk)
-	_REGISTER_CLOCK(NULL, "gpt1", gpt1_clk)
-	_REGISTER_CLOCK(NULL, "gpt2", gpt2_clk)
-	_REGISTER_CLOCK(NULL, "gpt3", gpt3_clk)
-	_REGISTER_CLOCK(NULL, "gpt4", gpt4_clk)
-	_REGISTER_CLOCK(NULL, "gpt5", gpt5_clk)
-	_REGISTER_CLOCK(NULL, "gpt6", gpt6_clk)
-	_REGISTER_CLOCK("mxc_pwm.0", NULL, pwm_clk)
-	_REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
-	_REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
-	_REGISTER_CLOCK("mxc-mmc.2", NULL, sdhc3_clk)
-	_REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
-	_REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
-	_REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
-	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
-	_REGISTER_CLOCK(NULL, "csi", csi_clk)
-	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk)
-	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk1)
-	_REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk)
-	_REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_clk1)
-	_REGISTER_CLOCK("mxc-ehci.1", "usb", usb_clk)
-	_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk1)
-	_REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk)
-	_REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk1)
-	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
-	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
-	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
-	_REGISTER_CLOCK(NULL, "vpu", vpu_clk)
-	_REGISTER_CLOCK(NULL, "dma", dma_clk)
-	_REGISTER_CLOCK(NULL, "rtic", rtic_clk)
-	_REGISTER_CLOCK(NULL, "brom", brom_clk)
-	_REGISTER_CLOCK(NULL, "emma", emma_clk)
-	_REGISTER_CLOCK(NULL, "slcdc", slcdc_clk)
-	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
-	_REGISTER_CLOCK(NULL, "emi", emi_clk)
-	_REGISTER_CLOCK(NULL, "sahara2", sahara2_clk)
-	_REGISTER_CLOCK(NULL, "ata", ata_clk)
-	_REGISTER_CLOCK(NULL, "mstick", mstick_clk)
-	_REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
-	_REGISTER_CLOCK(NULL, "gpio", gpio_clk)
-	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
-	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
-	_REGISTER_CLOCK(NULL, "iim", iim_clk)
-	_REGISTER_CLOCK(NULL, "kpp", kpp_clk)
-	_REGISTER_CLOCK("mxc_w1.0", NULL, owire_clk)
-	_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
-	_REGISTER_CLOCK(NULL, "scc", scc_clk)
-};
-
-/* Adjust the clock path for TO2 and later */
-static void __init to2_adjust_clocks(void)
-{
-	unsigned long cscr = __raw_readl(CCM_CSCR);
-
-	if (mx27_revision() >= CHIP_REV_2_0) {
-		if (cscr & CCM_CSCR_ARM_SRC)
-			cpu_clk.parent = &mpll_main1_clk;
-
-		if (!(cscr & CCM_CSCR_SSI2))
-			ssi1_clk.parent = &spll_clk;
-
-		if (!(cscr & CCM_CSCR_SSI1))
-			ssi1_clk.parent = &spll_clk;
-
-		if (!(cscr & CCM_CSCR_VPU))
-			vpu_clk.parent = &spll_clk;
-	} else {
-		cpu_clk.parent = &mpll_clk;
-		cpu_clk.set_parent = NULL;
-		cpu_clk.round_rate = NULL;
-		cpu_clk.set_rate = NULL;
-		ahb_clk.parent = &mpll_clk;
-
-		per1_clk.parent = &mpll_clk;
-		per2_clk.parent = &mpll_clk;
-		per3_clk.parent = &mpll_clk;
-		per4_clk.parent = &mpll_clk;
-
-		ssi1_clk.parent = &mpll_clk;
-		ssi2_clk.parent = &mpll_clk;
-
-		vpu_clk.parent = &mpll_clk;
-	}
-}
-
-/*
- * must be called very early to get information about the
- * available clock rate when the timer framework starts
- */
-int __init mx27_clocks_init(unsigned long fref)
-{
-	u32 cscr = __raw_readl(CCM_CSCR);
-
-	external_high_reference = fref;
-
-	/* detect clock reference for both system PLLs */
-	if (cscr & CCM_CSCR_MCU)
-		mpll_clk.parent = &ckih_clk;
-	else
-		mpll_clk.parent = &fpm_clk;
-
-	if (cscr & CCM_CSCR_SP)
-		spll_clk.parent = &ckih_clk;
-	else
-		spll_clk.parent = &fpm_clk;
-
-	to2_adjust_clocks();
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	/* Turn off all clocks we do not need */
-	__raw_writel(0, CCM_PCCR0);
-	__raw_writel((1 << 10) | (1 << 19), CCM_PCCR1);
-
-	spll_clk.disable(&spll_clk);
-
-	/* enable basic clocks */
-	clk_enable(&per1_clk);
-	clk_enable(&gpio_clk);
-	clk_enable(&emi_clk);
-	clk_enable(&iim_clk);
-
-#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
-	clk_enable(&uart1_clk);
-#endif
-
-	mxc_timer_init(&gpt1_clk, MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR),
-			MX27_INT_GPT1);
-
-	return 0;
-}
-
diff --git a/arch/arm/mach-mx2/cpu_imx27.c b/arch/arm/mach-mx2/cpu_imx27.c
deleted file mode 100644
index d8d3b2d..0000000
--- a/arch/arm/mach-mx2/cpu_imx27.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-/*
- * i.MX27 specific CPU detection code
- */
-
-#include <linux/io.h>
-#include <linux/module.h>
-
-#include <mach/hardware.h>
-
-static int cpu_silicon_rev = -1;
-static int cpu_partnumber;
-
-#define SYS_CHIP_ID             0x00    /* The offset of CHIP ID register */
-
-static void query_silicon_parameter(void)
-{
-	u32 val;
-	/*
-	 * now we have access to the IO registers. As we need
-	 * the silicon revision very early we read it here to
-	 * avoid any further hooks
-	*/
-	val = __raw_readl(MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR
-				+ SYS_CHIP_ID));
-
-	cpu_silicon_rev = (int)(val >> 28);
-	cpu_partnumber = (int)((val >> 12) & 0xFFFF);
-}
-
-/*
- * Returns:
- *	the silicon revision of the cpu
- *	-EINVAL - not a mx27
- */
-int mx27_revision(void)
-{
-	if (cpu_silicon_rev == -1)
-		query_silicon_parameter();
-
-	if (cpu_partnumber != 0x8821)
-		return -EINVAL;
-
-	return cpu_silicon_rev;
-}
-EXPORT_SYMBOL(mx27_revision);
diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
deleted file mode 100644
index a0aeb8a..0000000
--- a/arch/arm/mach-mx2/devices.c
+++ /dev/null
@@ -1,503 +0,0 @@
-/*
- * Author: MontaVista Software, Inc.
- *       <source@mvista.com>
- *
- * Based on the OMAP devices.c
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/dma-mapping.h>
-
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/mmc.h>
-
-#include "devices.h"
-
-/*
- * SPI master controller
- *
- * - i.MX1: 2 channel (slighly different register setting)
- * - i.MX21: 2 channel
- * - i.MX27: 3 channel
- */
-#define DEFINE_IMX_SPI_DEVICE(n, baseaddr, irq)					\
-	static struct resource mxc_spi_resources ## n[] = {			\
-		{								\
-			.start = baseaddr,					\
-			.end = baseaddr + SZ_4K - 1,				\
-			.flags = IORESOURCE_MEM,				\
-		}, {								\
-			.start = irq,						\
-			.end = irq,						\
-			.flags = IORESOURCE_IRQ,				\
-		},								\
-	};									\
-										\
-	struct platform_device mxc_spi_device ## n = {				\
-		.name = "spi_imx",						\
-		.id = n,							\
-		.num_resources = ARRAY_SIZE(mxc_spi_resources ## n),		\
-		.resource = mxc_spi_resources ## n,				\
-	}
-
-DEFINE_IMX_SPI_DEVICE(0, MX2x_CSPI1_BASE_ADDR, MX2x_INT_CSPI1);
-DEFINE_IMX_SPI_DEVICE(1, MX2x_CSPI2_BASE_ADDR, MX2x_INT_CSPI2);
-
-#ifdef CONFIG_MACH_MX27
-DEFINE_IMX_SPI_DEVICE(2, MX27_CSPI3_BASE_ADDR, MX27_INT_CSPI3);
-#endif
-
-/*
- * General Purpose Timer
- * - i.MX21: 3 timers
- * - i.MX27: 6 timers
- */
-#define DEFINE_IMX_GPT_DEVICE(n, baseaddr, irq)				\
-	static struct resource timer ## n ##_resources[] = {		\
-		{							\
-			.start = baseaddr,				\
-			.end = baseaddr + SZ_4K - 1,			\
-			.flags = IORESOURCE_MEM,			\
-		}, {							\
-			.start = irq,					\
-			.end = irq,					\
-			.flags = IORESOURCE_IRQ,			\
-		}							\
-	};								\
-									\
-	struct platform_device mxc_gpt ## n = {				\
-		.name = "imx_gpt",					\
-		.id = n,						\
-		.num_resources = ARRAY_SIZE(timer ## n ## _resources),	\
-		.resource = timer ## n ## _resources,			\
-	}
-
-/* We use gpt1 as system timer, so do not add a device for this one */
-DEFINE_IMX_GPT_DEVICE(1, MX2x_GPT2_BASE_ADDR, MX2x_INT_GPT2);
-DEFINE_IMX_GPT_DEVICE(2, MX2x_GPT3_BASE_ADDR, MX2x_INT_GPT3);
-
-#ifdef CONFIG_MACH_MX27
-DEFINE_IMX_GPT_DEVICE(3, MX27_GPT4_BASE_ADDR, MX27_INT_GPT4);
-DEFINE_IMX_GPT_DEVICE(4, MX27_GPT5_BASE_ADDR, MX27_INT_GPT5);
-DEFINE_IMX_GPT_DEVICE(5, MX27_GPT6_BASE_ADDR, MX27_INT_GPT6);
-#endif
-
-/* Watchdog: i.MX1 has seperate driver, i.MX21 and i.MX27 are equal */
-static struct resource mxc_wdt_resources[] = {
-	{
-		.start = MX2x_WDOG_BASE_ADDR,
-		.end = MX2x_WDOG_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device mxc_wdt = {
-	.name = "imx2-wdt",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_wdt_resources),
-	.resource = mxc_wdt_resources,
-};
-
-static struct resource mxc_w1_master_resources[] = {
-	{
-		.start = MX2x_OWIRE_BASE_ADDR,
-		.end = MX2x_OWIRE_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device mxc_w1_master_device = {
-	.name = "mxc_w1",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_w1_master_resources),
-	.resource = mxc_w1_master_resources,
-};
-
-#define DEFINE_MXC_NAND_DEVICE(pfx, baseaddr, irq)			\
-	static struct resource pfx ## _nand_resources[] = {		\
-		{							\
-			.start = baseaddr,				\
-			.end = baseaddr + SZ_4K - 1,			\
-			.flags = IORESOURCE_MEM,			\
-		}, {							\
-			.start = irq,					\
-			.end = irq,					\
-			.flags = IORESOURCE_IRQ,			\
-		},							\
-	};								\
-									\
-	struct platform_device pfx ## _nand_device = {			\
-		.name = "mxc_nand",					\
-		.id = 0,						\
-		.num_resources = ARRAY_SIZE(pfx ## _nand_resources),	\
-		.resource = pfx ## _nand_resources,			\
-	}
-
-#ifdef CONFIG_MACH_MX21
-DEFINE_MXC_NAND_DEVICE(imx21, MX21_NFC_BASE_ADDR, MX21_INT_NANDFC);
-#endif
-
-#ifdef CONFIG_MACH_MX27
-DEFINE_MXC_NAND_DEVICE(imx27, MX27_NFC_BASE_ADDR, MX27_INT_NANDFC);
-#endif
-
-/*
- * lcdc:
- * - i.MX1: the basic controller
- * - i.MX21: to be checked
- * - i.MX27: like i.MX1, with slightly variations
- */
-static struct resource mxc_fb[] = {
-	{
-		.start = MX2x_LCDC_BASE_ADDR,
-		.end = MX2x_LCDC_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX2x_INT_LCDC,
-		.end = MX2x_INT_LCDC,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-/* mxc lcd driver */
-struct platform_device mxc_fb_device = {
-	.name = "imx-fb",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_fb),
-	.resource = mxc_fb,
-	.dev = {
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
-
-#ifdef CONFIG_MACH_MX27
-static struct resource mxc_fec_resources[] = {
-	{
-		.start = MX27_FEC_BASE_ADDR,
-		.end = MX27_FEC_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX27_INT_FEC,
-		.end = MX27_INT_FEC,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_fec_device = {
-	.name = "fec",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_fec_resources),
-	.resource = mxc_fec_resources,
-};
-#endif
-
-#define DEFINE_IMX_I2C_DEVICE(n, baseaddr, irq)				\
-	static struct resource mxc_i2c_resources ## n[] = {		\
-		{							\
-			.start = baseaddr,				\
-			.end = baseaddr + SZ_4K - 1,			\
-			.flags = IORESOURCE_MEM,			\
-		}, {							\
-			.start = irq,					\
-			.end = irq,					\
-			.flags = IORESOURCE_IRQ,			\
-		}							\
-	};								\
-									\
-	struct platform_device mxc_i2c_device ## n = {			\
-		.name = "imx-i2c",					\
-		.id = n,						\
-		.num_resources = ARRAY_SIZE(mxc_i2c_resources ## n),	\
-		.resource = mxc_i2c_resources ## n,			\
-	}
-
-DEFINE_IMX_I2C_DEVICE(0, MX2x_I2C_BASE_ADDR, MX2x_INT_I2C);
-
-#ifdef CONFIG_MACH_MX27
-DEFINE_IMX_I2C_DEVICE(1, MX27_I2C2_BASE_ADDR, MX27_INT_I2C2);
-#endif
-
-static struct resource mxc_pwm_resources[] = {
-	{
-		.start = MX2x_PWM_BASE_ADDR,
-		.end = MX2x_PWM_BASE_ADDR + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX2x_INT_PWM,
-		.end = MX2x_INT_PWM,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-struct platform_device mxc_pwm_device = {
-	.name = "mxc_pwm",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(mxc_pwm_resources),
-	.resource = mxc_pwm_resources,
-};
-
-#define DEFINE_MXC_MMC_DEVICE(n, baseaddr, irq, dmareq)			\
-	static struct resource mxc_sdhc_resources ## n[] = {		\
-		{							\
-			.start = baseaddr,				\
-			.end = baseaddr + SZ_4K - 1,			\
-			.flags = IORESOURCE_MEM,			\
-		}, {							\
-			.start = irq,					\
-			.end = irq,					\
-			.flags = IORESOURCE_IRQ,			\
-		}, {							\
-			.start = dmareq,				\
-			.end = dmareq,					\
-			.flags = IORESOURCE_DMA,			\
-		},							\
-	};								\
-									\
-	static u64 mxc_sdhc ## n ## _dmamask = DMA_BIT_MASK(32);	\
-									\
-	struct platform_device mxc_sdhc_device ## n = {			\
-		.name = "mxc-mmc",					\
-		.id = n,						\
-		.dev = {						\
-			.dma_mask = &mxc_sdhc ## n ## _dmamask,		\
-			.coherent_dma_mask = DMA_BIT_MASK(32),		\
-		},							\
-		.num_resources = ARRAY_SIZE(mxc_sdhc_resources ## n),	\
-		.resource = mxc_sdhc_resources ## n,		\
-	}
-
-DEFINE_MXC_MMC_DEVICE(0, MX2x_SDHC1_BASE_ADDR, MX2x_INT_SDHC1, MX2x_DMA_REQ_SDHC1);
-DEFINE_MXC_MMC_DEVICE(1, MX2x_SDHC2_BASE_ADDR, MX2x_INT_SDHC2, MX2x_DMA_REQ_SDHC2);
-
-#ifdef CONFIG_MACH_MX27
-static struct resource otg_resources[] = {
-	{
-		.start = MX27_USBOTG_BASE_ADDR,
-		.end = MX27_USBOTG_BASE_ADDR + 0x1ff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX27_INT_USB3,
-		.end = MX27_INT_USB3,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static u64 otg_dmamask = DMA_BIT_MASK(32);
-
-/* OTG gadget device */
-struct platform_device mxc_otg_udc_device = {
-	.name		= "fsl-usb2-udc",
-	.id		= -1,
-	.dev		= {
-		.dma_mask		= &otg_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= otg_resources,
-	.num_resources	= ARRAY_SIZE(otg_resources),
-};
-
-/* OTG host */
-struct platform_device mxc_otg_host = {
-	.name = "mxc-ehci",
-	.id = 0,
-	.dev = {
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.dma_mask = &otg_dmamask,
-	},
-	.resource = otg_resources,
-	.num_resources = ARRAY_SIZE(otg_resources),
-};
-
-/* USB host 1 */
-
-static u64 usbh1_dmamask = DMA_BIT_MASK(32);
-
-static struct resource mxc_usbh1_resources[] = {
-	{
-		.start = MX27_USBOTG_BASE_ADDR + 0x200,
-		.end = MX27_USBOTG_BASE_ADDR + 0x3ff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX27_INT_USB1,
-		.end = MX27_INT_USB1,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_usbh1 = {
-	.name = "mxc-ehci",
-	.id = 1,
-	.dev = {
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.dma_mask = &usbh1_dmamask,
-	},
-	.resource = mxc_usbh1_resources,
-	.num_resources = ARRAY_SIZE(mxc_usbh1_resources),
-};
-
-/* USB host 2 */
-static u64 usbh2_dmamask = DMA_BIT_MASK(32);
-
-static struct resource mxc_usbh2_resources[] = {
-	{
-		.start = MX27_USBOTG_BASE_ADDR + 0x400,
-		.end = MX27_USBOTG_BASE_ADDR + 0x5ff,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX27_INT_USB2,
-		.end = MX27_INT_USB2,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_usbh2 = {
-	.name = "mxc-ehci",
-	.id = 2,
-	.dev = {
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-		.dma_mask = &usbh2_dmamask,
-	},
-	.resource = mxc_usbh2_resources,
-	.num_resources = ARRAY_SIZE(mxc_usbh2_resources),
-};
-#endif
-
-#define DEFINE_IMX_SSI_DMARES(_name, ssin, suffix)			\
-	{								\
-		.name = _name,						\
-		.start = MX2x_DMA_REQ_SSI ## ssin ## _ ## suffix,	\
-		.end = MX2x_DMA_REQ_SSI ## ssin ## _ ## suffix,		\
-		.flags = IORESOURCE_DMA,				\
-	}
-
-#define DEFINE_IMX_SSI_DEVICE(n, ssin, baseaddr, irq)			\
-	static struct resource imx_ssi_resources ## n[] = {		\
-		{							\
-			.start = MX2x_SSI ## ssin ## _BASE_ADDR,	\
-			.end = MX2x_SSI ## ssin ## _BASE_ADDR + 0x6f,	\
-			.flags = IORESOURCE_MEM,			\
-		}, {							\
-			.start = MX2x_INT_SSI1,				\
-			.end = MX2x_INT_SSI1,				\
-			.flags = IORESOURCE_IRQ,			\
-		},							\
-		DEFINE_IMX_SSI_DMARES("tx0", ssin, TX0),		\
-		DEFINE_IMX_SSI_DMARES("rx0", ssin, RX0),		\
-		DEFINE_IMX_SSI_DMARES("tx1", ssin, TX1),		\
-		DEFINE_IMX_SSI_DMARES("rx1", ssin, RX1),		\
-	};								\
-									\
-	struct platform_device imx_ssi_device ## n = {			\
-		.name = "imx-ssi",					\
-		.id = n,						\
-		.num_resources = ARRAY_SIZE(imx_ssi_resources ## n),	\
-		.resource = imx_ssi_resources ## n,			\
-	}
-
-DEFINE_IMX_SSI_DEVICE(0, 1, MX2x_SSI1_BASE_ADDR, MX2x_INT_SSI1);
-DEFINE_IMX_SSI_DEVICE(1, 2, MX2x_SSI1_BASE_ADDR, MX2x_INT_SSI1);
-
-/* GPIO port description */
-#define DEFINE_MXC_GPIO_PORT_IRQ(SOC, n, _irq)				\
-	{								\
-		.chip.label = "gpio-" #n,				\
-		.irq = _irq,						\
-		.base = SOC ## _IO_ADDRESS(MX2x_GPIO_BASE_ADDR +	\
-				n * 0x100),				\
-		.virtual_irq_start = MXC_GPIO_IRQ_START + n * 32,	\
-	}
-
-#define DEFINE_MXC_GPIO_PORT(SOC, n)					\
-	{								\
-		.chip.label = "gpio-" #n,				\
-		.base = SOC ## _IO_ADDRESS(MX2x_GPIO_BASE_ADDR +	\
-				n * 0x100),				\
-		.virtual_irq_start = MXC_GPIO_IRQ_START + n * 32,	\
-	}
-
-#define DEFINE_MXC_GPIO_PORTS(SOC, pfx)					\
-	static struct mxc_gpio_port pfx ## _gpio_ports[] = {		\
-		DEFINE_MXC_GPIO_PORT_IRQ(SOC, 0, SOC ## _INT_GPIO),	\
-		DEFINE_MXC_GPIO_PORT(SOC, 1),				\
-		DEFINE_MXC_GPIO_PORT(SOC, 2),				\
-		DEFINE_MXC_GPIO_PORT(SOC, 3),				\
-		DEFINE_MXC_GPIO_PORT(SOC, 4),				\
-		DEFINE_MXC_GPIO_PORT(SOC, 5),				\
-	}
-
-#ifdef CONFIG_MACH_MX21
-DEFINE_MXC_GPIO_PORTS(MX21, imx21);
-#endif
-
-#ifdef CONFIG_MACH_MX27
-DEFINE_MXC_GPIO_PORTS(MX27, imx27);
-#endif
-
-int __init mxc_register_gpios(void)
-{
-#ifdef CONFIG_MACH_MX21
-	if (cpu_is_mx21())
-		return mxc_gpio_init(imx21_gpio_ports, ARRAY_SIZE(imx21_gpio_ports));
-	else
-#endif
-#ifdef CONFIG_MACH_MX27
-	if (cpu_is_mx27())
-		return mxc_gpio_init(imx27_gpio_ports, ARRAY_SIZE(imx27_gpio_ports));
-	else
-#endif
-		return 0;
-}
-
-#ifdef CONFIG_MACH_MX21
-static struct resource mx21_usbhc_resources[] = {
-	{
-		.start	= MX21_USBOTG_BASE_ADDR,
-		.end	= MX21_USBOTG_BASE_ADDR + SZ_8K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start		= MX21_INT_USBHOST,
-		.end		= MX21_INT_USBHOST,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mx21_usbhc_device = {
-	.name		= "imx21-hcd",
-	.id		= 0,
-	.dev		= {
-		.dma_mask = &mx21_usbhc_device.dev.coherent_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.num_resources	= ARRAY_SIZE(mx21_usbhc_resources),
-	.resource	= mx21_usbhc_resources,
-};
-#endif
-
diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h
deleted file mode 100644
index 84ed513..0000000
--- a/arch/arm/mach-mx2/devices.h
+++ /dev/null
@@ -1,42 +0,0 @@
-extern struct platform_device mxc_gpt1;
-extern struct platform_device mxc_gpt2;
-#ifdef CONFIG_MACH_MX27
-extern struct platform_device mxc_gpt3;
-extern struct platform_device mxc_gpt4;
-extern struct platform_device mxc_gpt5;
-#endif
-extern struct platform_device mxc_wdt;
-extern struct platform_device mxc_uart_device0;
-extern struct platform_device mxc_uart_device1;
-extern struct platform_device mxc_uart_device2;
-extern struct platform_device mxc_uart_device3;
-extern struct platform_device mxc_uart_device4;
-extern struct platform_device mxc_uart_device5;
-extern struct platform_device mxc_w1_master_device;
-#ifdef CONFIG_MACH_MX21
-extern struct platform_device imx21_nand_device;
-#endif
-#ifdef CONFIG_MACH_MX27
-extern struct platform_device imx27_nand_device;
-#endif
-extern struct platform_device mxc_fb_device;
-extern struct platform_device mxc_fec_device;
-extern struct platform_device mxc_pwm_device;
-extern struct platform_device mxc_i2c_device0;
-#ifdef CONFIG_MACH_MX27
-extern struct platform_device mxc_i2c_device1;
-#endif
-extern struct platform_device mxc_sdhc_device0;
-extern struct platform_device mxc_sdhc_device1;
-extern struct platform_device mxc_otg_udc_device;
-extern struct platform_device mxc_otg_host;
-extern struct platform_device mxc_usbh1;
-extern struct platform_device mxc_usbh2;
-extern struct platform_device mxc_spi_device0;
-extern struct platform_device mxc_spi_device1;
-#ifdef CONFIG_MACH_MX27
-extern struct platform_device mxc_spi_device2;
-#endif
-extern struct platform_device mx21_usbhc_device;
-extern struct platform_device imx_ssi_device0;
-extern struct platform_device imx_ssi_device1;
diff --git a/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c b/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
deleted file mode 100644
index f3b169d..0000000
--- a/arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
+++ /dev/null
@@ -1,249 +0,0 @@
-/*
- * Copyright (C) 2009 Eric Benard - eric@eukrea.com
- *
- * Based on pcm970-baseboard.c which is :
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-
-#include <asm/mach/arch.h>
-
-#include <mach/common.h>
-#include <mach/iomux-mx27.h>
-#include <mach/imxfb.h>
-#include <mach/hardware.h>
-#include <mach/mmc.h>
-#include <mach/imx-uart.h>
-
-#include "devices.h"
-
-static int eukrea_mbimx27_pins[] = {
-	/* UART2 */
-	PE3_PF_UART2_CTS,
-	PE4_PF_UART2_RTS,
-	PE6_PF_UART2_TXD,
-	PE7_PF_UART2_RXD,
-	/* UART3 */
-	PE8_PF_UART3_TXD,
-	PE9_PF_UART3_RXD,
-	PE10_PF_UART3_CTS,
-	PE11_PF_UART3_RTS,
-	/* UART4 */
-	PB26_AF_UART4_RTS,
-	PB28_AF_UART4_TXD,
-	PB29_AF_UART4_CTS,
-	PB31_AF_UART4_RXD,
-	/* SDHC1*/
-	PE18_PF_SD1_D0,
-	PE19_PF_SD1_D1,
-	PE20_PF_SD1_D2,
-	PE21_PF_SD1_D3,
-	PE22_PF_SD1_CMD,
-	PE23_PF_SD1_CLK,
-	/* display */
-	PA5_PF_LSCLK,
-	PA6_PF_LD0,
-	PA7_PF_LD1,
-	PA8_PF_LD2,
-	PA9_PF_LD3,
-	PA10_PF_LD4,
-	PA11_PF_LD5,
-	PA12_PF_LD6,
-	PA13_PF_LD7,
-	PA14_PF_LD8,
-	PA15_PF_LD9,
-	PA16_PF_LD10,
-	PA17_PF_LD11,
-	PA18_PF_LD12,
-	PA19_PF_LD13,
-	PA20_PF_LD14,
-	PA21_PF_LD15,
-	PA22_PF_LD16,
-	PA23_PF_LD17,
-	PA28_PF_HSYNC,
-	PA29_PF_VSYNC,
-	PA30_PF_CONTRAST,
-	PA31_PF_OE_ACD,
-	/* SPI1 */
-	PD28_PF_CSPI1_SS0,
-	PD29_PF_CSPI1_SCLK,
-	PD30_PF_CSPI1_MISO,
-	PD31_PF_CSPI1_MOSI,
-};
-
-static struct gpio_led gpio_leds[] = {
-	{
-		.name			= "led1",
-		.default_trigger	= "heartbeat",
-		.active_low		= 1,
-		.gpio			= GPIO_PORTF | 16,
-	},
-	{
-		.name			= "led2",
-		.default_trigger	= "none",
-		.active_low		= 1,
-		.gpio			= GPIO_PORTF | 19,
-	},
-	{
-		.name			= "backlight",
-		.default_trigger	= "backlight",
-		.active_low		= 0,
-		.gpio			= GPIO_PORTE | 5,
-	},
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device leds_gpio = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &gpio_led_info,
-	},
-};
-
-static struct imx_fb_videomode eukrea_mbimx27_modes[] = {
-	{
-		.mode = {
-			.name		= "CMO-QGVA",
-			.refresh	= 60,
-			.xres		= 320,
-			.yres		= 240,
-			.pixclock	= 156000,
-			.hsync_len	= 30,
-			.left_margin	= 38,
-			.right_margin	= 20,
-			.vsync_len	= 3,
-			.upper_margin	= 15,
-			.lower_margin	= 4,
-		},
-		.pcr		= 0xFAD08B80,
-		.bpp		= 16,
-	},
-};
-
-static struct imx_fb_platform_data eukrea_mbimx27_fb_data = {
-	.mode = eukrea_mbimx27_modes,
-	.num_modes = ARRAY_SIZE(eukrea_mbimx27_modes),
-
-	.pwmr		= 0x00A903FF,
-	.lscr1		= 0x00120300,
-	.dmacr		= 0x00040060,
-};
-
-static struct imxuart_platform_data uart_pdata[] = {
-	{
-		.flags = IMXUART_HAVE_RTSCTS,
-	},
-	{
-		.flags = IMXUART_HAVE_RTSCTS,
-	},
-};
-
-#if defined(CONFIG_TOUCHSCREEN_ADS7846)
-	|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-
-#define ADS7846_PENDOWN (GPIO_PORTD | 25)
-
-static void ads7846_dev_init(void)
-{
-	if (gpio_request(ADS7846_PENDOWN, "ADS7846 pendown") < 0) {
-		printk(KERN_ERR "can't get ads746 pen down GPIO\n");
-		return;
-	}
-
-	gpio_direction_input(ADS7846_PENDOWN);
-}
-
-static int ads7846_get_pendown_state(void)
-{
-	return !gpio_get_value(ADS7846_PENDOWN);
-}
-
-static struct ads7846_platform_data ads7846_config __initdata = {
-	.get_pendown_state	= ads7846_get_pendown_state,
-	.keep_vref_on		= 1,
-};
-
-static struct spi_board_info eukrea_mbimx27_spi_board_info[] __initdata = {
-	[0] = {
-		.modalias	= "ads7846",
-		.bus_num	= 0,
-		.chip_select	= 0,
-		.max_speed_hz	= 1500000,
-		.irq		= IRQ_GPIOD(25),
-		.platform_data	= &ads7846_config,
-		.mode           = SPI_MODE_2,
-	},
-};
-
-static int eukrea_mbimx27_spi_cs[] = {GPIO_PORTD | 28};
-
-static struct spi_imx_master eukrea_mbimx27_spi_0_data = {
-	.chipselect	= eukrea_mbimx27_spi_cs,
-	.num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs),
-};
-#endif
-
-static struct platform_device *platform_devices[] __initdata = {
-	&leds_gpio,
-};
-
-/*
- * system init for baseboard usage. Will be called by cpuimx27 init.
- *
- * Add platform devices present on this baseboard and init
- * them from CPU side as far as required to use them later on
- */
-void __init eukrea_mbimx27_baseboard_init(void)
-{
-	mxc_gpio_setup_multiple_pins(eukrea_mbimx27_pins,
-		ARRAY_SIZE(eukrea_mbimx27_pins), "MBIMX27");
-
-	mxc_register_device(&mxc_uart_device1, &uart_pdata[0]);
-	mxc_register_device(&mxc_uart_device2, &uart_pdata[1]);
-
-	mxc_register_device(&mxc_fb_device, &eukrea_mbimx27_fb_data);
-	mxc_register_device(&mxc_sdhc_device0, NULL);
-
-#if defined(CONFIG_TOUCHSCREEN_ADS7846)
-	|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-	/* SPI and ADS7846 Touchscreen controler init */
-	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
-	mxc_gpio_mode(GPIO_PORTD | 25 | GPIO_GPIO | GPIO_IN);
-	mxc_register_device(&mxc_spi_device0, &eukrea_mbimx27_spi_0_data);
-	spi_register_board_info(eukrea_mbimx27_spi_board_info,
-			ARRAY_SIZE(eukrea_mbimx27_spi_board_info));
-	ads7846_dev_init();
-#endif
-
-	/* Leds configuration */
-	mxc_gpio_mode(GPIO_PORTF | 16 | GPIO_GPIO | GPIO_OUT);
-	mxc_gpio_mode(GPIO_PORTF | 19 | GPIO_GPIO | GPIO_OUT);
-	/* Backlight */
-	mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_OUT);
-
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-}
diff --git a/arch/arm/mach-mx2/mach-cpuimx27.c b/arch/arm/mach-mx2/mach-cpuimx27.c
deleted file mode 100644
index 1f616dca..0000000
--- a/arch/arm/mach-mx2/mach-cpuimx27.c
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
- * Copyright (C) 2009 Eric Benard - eric@eukrea.com
- *
- * Based on pcm038.c which is :
- * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/i2c.h>
-#include <linux/io.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include <mach/board-eukrea_cpuimx27.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/i2c.h>
-#include <mach/iomux-mx27.h>
-#include <mach/imx-uart.h>
-#include <mach/mxc_nand.h>
-
-#include "devices.h"
-
-static int eukrea_cpuimx27_pins[] = {
-	/* UART1 */
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	PE14_PF_UART1_CTS,
-	PE15_PF_UART1_RTS,
-	/* UART4 */
-	PB26_AF_UART4_RTS,
-	PB28_AF_UART4_TXD,
-	PB29_AF_UART4_CTS,
-	PB31_AF_UART4_RXD,
-	/* FEC */
-	PD0_AIN_FEC_TXD0,
-	PD1_AIN_FEC_TXD1,
-	PD2_AIN_FEC_TXD2,
-	PD3_AIN_FEC_TXD3,
-	PD4_AOUT_FEC_RX_ER,
-	PD5_AOUT_FEC_RXD1,
-	PD6_AOUT_FEC_RXD2,
-	PD7_AOUT_FEC_RXD3,
-	PD8_AF_FEC_MDIO,
-	PD9_AIN_FEC_MDC,
-	PD10_AOUT_FEC_CRS,
-	PD11_AOUT_FEC_TX_CLK,
-	PD12_AOUT_FEC_RXD0,
-	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_RX_CLK,
-	PD15_AOUT_FEC_COL,
-	PD16_AIN_FEC_TX_ER,
-	PF23_AIN_FEC_TX_EN,
-	/* I2C1 */
-	PD17_PF_I2C_DATA,
-	PD18_PF_I2C_CLK,
-	/* SDHC2 */
-	PB4_PF_SD2_D0,
-	PB5_PF_SD2_D1,
-	PB6_PF_SD2_D2,
-	PB7_PF_SD2_D3,
-	PB8_PF_SD2_CMD,
-	PB9_PF_SD2_CLK,
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
-	/* Quad UART's IRQ */
-	GPIO_PORTD | 22 | GPIO_GPIO | GPIO_IN,
-	GPIO_PORTD | 23 | GPIO_GPIO | GPIO_IN,
-	GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN,
-	GPIO_PORTD | 30 | GPIO_GPIO | GPIO_IN,
-#endif
-};
-
-static struct physmap_flash_data eukrea_cpuimx27_flash_data = {
-	.width = 2,
-};
-
-static struct resource eukrea_cpuimx27_flash_resource = {
-	.start = 0xc0000000,
-	.end   = 0xc3ffffff,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platform_device eukrea_cpuimx27_nor_mtd_device = {
-	.name = "physmap-flash",
-	.id = 0,
-	.dev = {
-		.platform_data = &eukrea_cpuimx27_flash_data,
-	},
-	.num_resources = 1,
-	.resource = &eukrea_cpuimx27_flash_resource,
-};
-
-static struct imxuart_platform_data uart_pdata[] = {
-	{
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	},
-};
-
-static struct mxc_nand_platform_data eukrea_cpuimx27_nand_board_info = {
-	.width = 1,
-	.hw_ecc = 1,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
-	&eukrea_cpuimx27_nor_mtd_device,
-	&mxc_fec_device,
-};
-
-static struct imxi2c_platform_data eukrea_cpuimx27_i2c_1_data = {
-	.bitrate = 100000,
-};
-
-static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	},
-};
-
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
-static struct plat_serial8250_port serial_platform_data[] = {
-	{
-		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x200000),
-		.irq = IRQ_GPIOB(23),
-		.uartclk = 14745600,
-		.regshift = 1,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x400000),
-		.irq = IRQ_GPIOB(22),
-		.uartclk = 14745600,
-		.regshift = 1,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x800000),
-		.irq = IRQ_GPIOB(27),
-		.uartclk = 14745600,
-		.regshift = 1,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x1000000),
-		.irq = IRQ_GPIOB(30),
-		.uartclk = 14745600,
-		.regshift = 1,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-	}
-};
-
-static struct platform_device serial_device = {
-	.name = "serial8250",
-	.id = 0,
-	.dev = {
-		.platform_data = serial_platform_data,
-	},
-};
-#endif
-
-static void __init eukrea_cpuimx27_init(void)
-{
-	mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins,
-		ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27");
-
-	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
-
-	mxc_register_device(&imx27_nand_device,
-			&eukrea_cpuimx27_nand_board_info);
-
-	i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
-				ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
-
-	mxc_register_device(&mxc_i2c_device0, &eukrea_cpuimx27_i2c_1_data);
-
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-
-#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
-	/* SDHC2 can be used for Wifi */
-	mxc_register_device(&mxc_sdhc_device1, NULL);
-	/* in which case UART4 is also used for Bluetooth */
-	mxc_register_device(&mxc_uart_device3, &uart_pdata[1]);
-#endif
-
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
-	platform_device_register(&serial_device);
-#endif
-
-#ifdef CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD
-	eukrea_mbimx27_baseboard_init();
-#endif
-}
-
-static void __init eukrea_cpuimx27_timer_init(void)
-{
-	mx27_clocks_init(26000000);
-}
-
-static struct sys_timer eukrea_cpuimx27_timer = {
-	.init = eukrea_cpuimx27_timer_init,
-};
-
-MACHINE_START(CPUIMX27, "EUKREA CPUIMX27")
-	.phys_io        = MX27_AIPI_BASE_ADDR,
-	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = MX27_PHYS_OFFSET + 0x100,
-	.map_io         = mx27_map_io,
-	.init_irq       = mx27_init_irq,
-	.init_machine   = eukrea_cpuimx27_init,
-	.timer          = &eukrea_cpuimx27_timer,
-MACHINE_END
diff --git a/arch/arm/mach-mx2/mach-imx27lite.c b/arch/arm/mach-mx2/mach-imx27lite.c
deleted file mode 100644
index fd1dddb..0000000
--- a/arch/arm/mach-mx2/mach-imx27lite.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- * Copyright 2009 Daniel Schaeffer (daniel.schaeffer@timesys.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/imx-uart.h>
-#include <mach/iomux-mx27.h>
-
-#include "devices.h"
-
-static unsigned int mx27lite_pins[] = {
-	/* UART1 */
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	PE14_PF_UART1_CTS,
-	PE15_PF_UART1_RTS,
-	/* FEC */
-	PD0_AIN_FEC_TXD0,
-	PD1_AIN_FEC_TXD1,
-	PD2_AIN_FEC_TXD2,
-	PD3_AIN_FEC_TXD3,
-	PD4_AOUT_FEC_RX_ER,
-	PD5_AOUT_FEC_RXD1,
-	PD6_AOUT_FEC_RXD2,
-	PD7_AOUT_FEC_RXD3,
-	PD8_AF_FEC_MDIO,
-	PD9_AIN_FEC_MDC,
-	PD10_AOUT_FEC_CRS,
-	PD11_AOUT_FEC_TX_CLK,
-	PD12_AOUT_FEC_RXD0,
-	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_RX_CLK,
-	PD15_AOUT_FEC_COL,
-	PD16_AIN_FEC_TX_ER,
-	PF23_AIN_FEC_TX_EN,
-};
-
-static struct imxuart_platform_data uart_pdata = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
-	&mxc_fec_device,
-};
-
-static void __init mx27lite_init(void)
-{
-	mxc_gpio_setup_multiple_pins(mx27lite_pins, ARRAY_SIZE(mx27lite_pins),
-		"imx27lite");
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-}
-
-static void __init mx27lite_timer_init(void)
-{
-	mx27_clocks_init(26000000);
-}
-
-static struct sys_timer mx27lite_timer = {
-	.init	= mx27lite_timer_init,
-};
-
-MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
-	.phys_io        = MX27_AIPI_BASE_ADDR,
-	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = MX27_PHYS_OFFSET + 0x100,
-	.map_io         = mx27_map_io,
-	.init_irq       = mx27_init_irq,
-	.init_machine   = mx27lite_init,
-	.timer          = &mx27lite_timer,
-MACHINE_END
diff --git a/arch/arm/mach-mx2/mach-mx21ads.c b/arch/arm/mach-mx2/mach-mx21ads.c
deleted file mode 100644
index 99f2492..0000000
--- a/arch/arm/mach-mx2/mach-mx21ads.c
+++ /dev/null
@@ -1,328 +0,0 @@
-/*
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *  Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/physmap.h>
-#include <linux/gpio.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <mach/imx-uart.h>
-#include <mach/imxfb.h>
-#include <mach/iomux-mx21.h>
-#include <mach/mxc_nand.h>
-#include <mach/mmc.h>
-
-#include "devices.h"
-
-/*
- * Memory-mapped I/O on MX21ADS base board
- */
-#define MX21ADS_MMIO_BASE_ADDR   0xf5000000
-#define MX21ADS_MMIO_SIZE        SZ_16M
-
-#define MX21ADS_REG_ADDR(offset)    (void __force __iomem *) \
-		(MX21ADS_MMIO_BASE_ADDR + (offset))
-
-#define MX21ADS_CS8900A_IRQ         IRQ_GPIOE(11)
-#define MX21ADS_CS8900A_IOBASE_REG  MX21ADS_REG_ADDR(0x000000)
-#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000)
-#define MX21ADS_VERSION_REG         MX21ADS_REG_ADDR(0x400000)
-#define MX21ADS_IO_REG              MX21ADS_REG_ADDR(0x800000)
-
-/* MX21ADS_IO_REG bit definitions */
-#define MX21ADS_IO_SD_WP        0x0001 /* read */
-#define MX21ADS_IO_TP6          0x0001 /* write */
-#define MX21ADS_IO_SW_SEL       0x0002 /* read */
-#define MX21ADS_IO_TP7          0x0002 /* write */
-#define MX21ADS_IO_RESET_E_UART 0x0004
-#define MX21ADS_IO_RESET_BASE   0x0008
-#define MX21ADS_IO_CSI_CTL2     0x0010
-#define MX21ADS_IO_CSI_CTL1     0x0020
-#define MX21ADS_IO_CSI_CTL0     0x0040
-#define MX21ADS_IO_UART1_EN     0x0080
-#define MX21ADS_IO_UART4_EN     0x0100
-#define MX21ADS_IO_LCDON        0x0200
-#define MX21ADS_IO_IRDA_EN      0x0400
-#define MX21ADS_IO_IRDA_FIR_SEL 0x0800
-#define MX21ADS_IO_IRDA_MD0_B   0x1000
-#define MX21ADS_IO_IRDA_MD1     0x2000
-#define MX21ADS_IO_LED4_ON      0x4000
-#define MX21ADS_IO_LED3_ON      0x8000
-
-static unsigned int mx21ads_pins[] = {
-
-	/* CS8900A */
-	(GPIO_PORTE | GPIO_GPIO | GPIO_IN | 11),
-
-	/* UART1 */
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	PE14_PF_UART1_CTS,
-	PE15_PF_UART1_RTS,
-
-	/* UART3 (IrDA) - only TXD and RXD */
-	PE8_PF_UART3_TXD,
-	PE9_PF_UART3_RXD,
-
-	/* UART4 */
-	PB26_AF_UART4_RTS,
-	PB28_AF_UART4_TXD,
-	PB29_AF_UART4_CTS,
-	PB31_AF_UART4_RXD,
-
-	/* LCDC */
-	PA5_PF_LSCLK,
-	PA6_PF_LD0,
-	PA7_PF_LD1,
-	PA8_PF_LD2,
-	PA9_PF_LD3,
-	PA10_PF_LD4,
-	PA11_PF_LD5,
-	PA12_PF_LD6,
-	PA13_PF_LD7,
-	PA14_PF_LD8,
-	PA15_PF_LD9,
-	PA16_PF_LD10,
-	PA17_PF_LD11,
-	PA18_PF_LD12,
-	PA19_PF_LD13,
-	PA20_PF_LD14,
-	PA21_PF_LD15,
-	PA22_PF_LD16,
-	PA24_PF_REV,     /* Sharp panel dedicated signal */
-	PA25_PF_CLS,     /* Sharp panel dedicated signal */
-	PA26_PF_PS,      /* Sharp panel dedicated signal */
-	PA27_PF_SPL_SPR, /* Sharp panel dedicated signal */
-	PA28_PF_HSYNC,
-	PA29_PF_VSYNC,
-	PA30_PF_CONTRAST,
-	PA31_PF_OE_ACD,
-
-	/* MMC/SDHC */
-	PE18_PF_SD1_D0,
-	PE19_PF_SD1_D1,
-	PE20_PF_SD1_D2,
-	PE21_PF_SD1_D3,
-	PE22_PF_SD1_CMD,
-	PE23_PF_SD1_CLK,
-
-	/* NFC */
-	PF0_PF_NRFB,
-	PF1_PF_NFCE,
-	PF2_PF_NFWP,
-	PF3_PF_NFCLE,
-	PF4_PF_NFALE,
-	PF5_PF_NFRE,
-	PF6_PF_NFWE,
-	PF7_PF_NFIO0,
-	PF8_PF_NFIO1,
-	PF9_PF_NFIO2,
-	PF10_PF_NFIO3,
-	PF11_PF_NFIO4,
-	PF12_PF_NFIO5,
-	PF13_PF_NFIO6,
-	PF14_PF_NFIO7,
-};
-
-/* ADS's NOR flash: 2x AM29BDS128HE9VKI on 32-bit bus */
-static struct physmap_flash_data mx21ads_flash_data = {
-	.width = 4,
-};
-
-static struct resource mx21ads_flash_resource = {
-	.start = MX21_CS0_BASE_ADDR,
-	.end = MX21_CS0_BASE_ADDR + 0x02000000 - 1,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platform_device mx21ads_nor_mtd_device = {
-	.name = "physmap-flash",
-	.id = 0,
-	.dev = {
-		.platform_data = &mx21ads_flash_data,
-	},
-	.num_resources = 1,
-	.resource = &mx21ads_flash_resource,
-};
-
-static struct imxuart_platform_data uart_pdata = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct imxuart_platform_data uart_norts_pdata = {
-};
-
-
-static int mx21ads_fb_init(struct platform_device *pdev)
-{
-	u16 tmp;
-
-	tmp = __raw_readw(MX21ADS_IO_REG);
-	tmp |= MX21ADS_IO_LCDON;
-	__raw_writew(tmp, MX21ADS_IO_REG);
-	return 0;
-}
-
-static void mx21ads_fb_exit(struct platform_device *pdev)
-{
-	u16 tmp;
-
-	tmp = __raw_readw(MX21ADS_IO_REG);
-	tmp &= ~MX21ADS_IO_LCDON;
-	__raw_writew(tmp, MX21ADS_IO_REG);
-}
-
-/*
- * Connected is a portrait Sharp-QVGA display
- * of type: LQ035Q7DB02
- */
-static struct imx_fb_videomode mx21ads_modes[] = {
-	{
-		.mode = {
-			.name		= "Sharp-LQ035Q7",
-			.refresh	= 60,
-			.xres		= 240,
-			.yres		= 320,
-			.pixclock	= 188679, /* in ps (5.3MHz) */
-			.hsync_len	= 2,
-			.left_margin	= 6,
-			.right_margin	= 16,
-			.vsync_len	= 1,
-			.upper_margin	= 8,
-			.lower_margin	= 10,
-		},
-		.pcr		= 0xfb108bc7,
-		.bpp		= 16,
-	},
-};
-
-static struct imx_fb_platform_data mx21ads_fb_data = {
-	.mode = mx21ads_modes,
-	.num_modes = ARRAY_SIZE(mx21ads_modes),
-
-	.pwmr		= 0x00a903ff,
-	.lscr1		= 0x00120300,
-	.dmacr		= 0x00020008,
-
-	.init = mx21ads_fb_init,
-	.exit = mx21ads_fb_exit,
-};
-
-static int mx21ads_sdhc_get_ro(struct device *dev)
-{
-	return (__raw_readw(MX21ADS_IO_REG) & MX21ADS_IO_SD_WP) ? 1 : 0;
-}
-
-static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq,
-	void *data)
-{
-	int ret;
-
-	ret = request_irq(IRQ_GPIOD(25), detect_irq,
-		IRQF_TRIGGER_FALLING, "mmc-detect", data);
-	if (ret)
-		goto out;
-	return 0;
-out:
-	return ret;
-}
-
-static void mx21ads_sdhc_exit(struct device *dev, void *data)
-{
-	free_irq(IRQ_GPIOD(25), data);
-}
-
-static struct imxmmc_platform_data mx21ads_sdhc_pdata = {
-	.ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31, /* 3.0V */
-	.get_ro = mx21ads_sdhc_get_ro,
-	.init = mx21ads_sdhc_init,
-	.exit = mx21ads_sdhc_exit,
-};
-
-static struct mxc_nand_platform_data mx21ads_nand_board_info = {
-	.width = 1,
-	.hw_ecc = 1,
-};
-
-static struct map_desc mx21ads_io_desc[] __initdata = {
-	/*
-	 * Memory-mapped I/O on MX21ADS Base board:
-	 *   - CS8900A Ethernet controller
-	 *   - ST16C2552CJ UART
-	 *   - CPU and Base board version
-	 *   - Base board I/O register
-	 */
-	{
-		.virtual = MX21ADS_MMIO_BASE_ADDR,
-		.pfn = __phys_to_pfn(MX21_CS1_BASE_ADDR),
-		.length = MX21ADS_MMIO_SIZE,
-		.type = MT_DEVICE,
-	},
-};
-
-static void __init mx21ads_map_io(void)
-{
-	mx21_map_io();
-	iotable_init(mx21ads_io_desc, ARRAY_SIZE(mx21ads_io_desc));
-}
-
-static struct platform_device *platform_devices[] __initdata = {
-	&mx21ads_nor_mtd_device,
-};
-
-static void __init mx21ads_board_init(void)
-{
-	mxc_gpio_setup_multiple_pins(mx21ads_pins, ARRAY_SIZE(mx21ads_pins),
-			"mx21ads");
-
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-	mxc_register_device(&mxc_uart_device2, &uart_norts_pdata);
-	mxc_register_device(&mxc_uart_device3, &uart_pdata);
-	mxc_register_device(&mxc_fb_device, &mx21ads_fb_data);
-	mxc_register_device(&mxc_sdhc_device0, &mx21ads_sdhc_pdata);
-	mxc_register_device(&imx21_nand_device, &mx21ads_nand_board_info);
-
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-}
-
-static void __init mx21ads_timer_init(void)
-{
-	mx21_clocks_init(32768, 26000000);
-}
-
-static struct sys_timer mx21ads_timer = {
-	.init	= mx21ads_timer_init,
-};
-
-MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
-	/* maintainer: Freescale Semiconductor, Inc. */
-	.phys_io        = MX21_AIPI_BASE_ADDR,
-	.io_pg_offst    = ((MX21_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = MX21_PHYS_OFFSET + 0x100,
-	.map_io         = mx21ads_map_io,
-	.init_irq       = mx21_init_irq,
-	.init_machine   = mx21ads_board_init,
-	.timer          = &mx21ads_timer,
-MACHINE_END
diff --git a/arch/arm/mach-mx2/mach-mx27_3ds.c b/arch/arm/mach-mx2/mach-mx27_3ds.c
deleted file mode 100644
index a45df59..0000000
--- a/arch/arm/mach-mx2/mach-mx27_3ds.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/*
- * This machine is known as:
- *  - i.MX27 3-Stack Development System
- *  - i.MX27 Platform Development Kit (i.MX27 PDK)
- */
-
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/imx-uart.h>
-#include <mach/iomux-mx27.h>
-
-#include "devices.h"
-
-static unsigned int mx27pdk_pins[] = {
-	/* UART1 */
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	PE14_PF_UART1_CTS,
-	PE15_PF_UART1_RTS,
-	/* FEC */
-	PD0_AIN_FEC_TXD0,
-	PD1_AIN_FEC_TXD1,
-	PD2_AIN_FEC_TXD2,
-	PD3_AIN_FEC_TXD3,
-	PD4_AOUT_FEC_RX_ER,
-	PD5_AOUT_FEC_RXD1,
-	PD6_AOUT_FEC_RXD2,
-	PD7_AOUT_FEC_RXD3,
-	PD8_AF_FEC_MDIO,
-	PD9_AIN_FEC_MDC,
-	PD10_AOUT_FEC_CRS,
-	PD11_AOUT_FEC_TX_CLK,
-	PD12_AOUT_FEC_RXD0,
-	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_RX_CLK,
-	PD15_AOUT_FEC_COL,
-	PD16_AIN_FEC_TX_ER,
-	PF23_AIN_FEC_TX_EN,
-};
-
-static struct imxuart_platform_data uart_pdata = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
-	&mxc_fec_device,
-};
-
-static void __init mx27pdk_init(void)
-{
-	mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
-		"mx27pdk");
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-}
-
-static void __init mx27pdk_timer_init(void)
-{
-	mx27_clocks_init(26000000);
-}
-
-static struct sys_timer mx27pdk_timer = {
-	.init	= mx27pdk_timer_init,
-};
-
-MACHINE_START(MX27_3DS, "Freescale MX27PDK")
-	/* maintainer: Freescale Semiconductor, Inc. */
-	.phys_io        = MX27_AIPI_BASE_ADDR,
-	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = MX27_PHYS_OFFSET + 0x100,
-	.map_io         = mx27_map_io,
-	.init_irq       = mx27_init_irq,
-	.init_machine   = mx27pdk_init,
-	.timer          = &mx27pdk_timer,
-MACHINE_END
diff --git a/arch/arm/mach-mx2/mach-mx27ads.c b/arch/arm/mach-mx2/mach-mx27ads.c
deleted file mode 100644
index 2183e3d..0000000
--- a/arch/arm/mach-mx2/mach-mx27ads.c
+++ /dev/null
@@ -1,373 +0,0 @@
-/*
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *  Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/irq.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <mach/gpio.h>
-#include <mach/imx-uart.h>
-#include <mach/iomux-mx27.h>
-#include <mach/mxc_nand.h>
-#include <mach/i2c.h>
-#include <mach/imxfb.h>
-#include <mach/mmc.h>
-
-#include "devices.h"
-
-/*
- * Base address of PBC controller, CS4
- */
-#define PBC_BASE_ADDRESS        0xf4300000
-#define PBC_REG_ADDR(offset)    (void __force __iomem *) \
-		(PBC_BASE_ADDRESS + (offset))
-
-/* When the PBC address connection is fixed in h/w, defined as 1 */
-#define PBC_ADDR_SH             0
-
-/* Offsets for the PBC Controller register */
-/*
- * PBC Board version register offset
- */
-#define PBC_VERSION_REG         PBC_REG_ADDR(0x00000 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 1 set address.
- */
-#define PBC_BCTRL1_SET_REG      PBC_REG_ADDR(0x00008 >> PBC_ADDR_SH)
-/*
- * PBC Board control register 1 clear address.
- */
-#define PBC_BCTRL1_CLEAR_REG    PBC_REG_ADDR(0x0000C >> PBC_ADDR_SH)
-
-/* PBC Board Control Register 1 bit definitions */
-#define PBC_BCTRL1_LCDON        0x0800	/* Enable the LCD */
-
-/* to determine the correct external crystal reference */
-#define CKIH_27MHZ_BIT_SET      (1 << 3)
-
-static unsigned int mx27ads_pins[] = {
-	/* UART0 */
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	PE14_PF_UART1_CTS,
-	PE15_PF_UART1_RTS,
-	/* UART1 */
-	PE3_PF_UART2_CTS,
-	PE4_PF_UART2_RTS,
-	PE6_PF_UART2_TXD,
-	PE7_PF_UART2_RXD,
-	/* UART2 */
-	PE8_PF_UART3_TXD,
-	PE9_PF_UART3_RXD,
-	PE10_PF_UART3_CTS,
-	PE11_PF_UART3_RTS,
-	/* UART3 */
-	PB26_AF_UART4_RTS,
-	PB28_AF_UART4_TXD,
-	PB29_AF_UART4_CTS,
-	PB31_AF_UART4_RXD,
-	/* UART4 */
-	PB18_AF_UART5_TXD,
-	PB19_AF_UART5_RXD,
-	PB20_AF_UART5_CTS,
-	PB21_AF_UART5_RTS,
-	/* UART5 */
-	PB10_AF_UART6_TXD,
-	PB12_AF_UART6_CTS,
-	PB11_AF_UART6_RXD,
-	PB13_AF_UART6_RTS,
-	/* FEC */
-	PD0_AIN_FEC_TXD0,
-	PD1_AIN_FEC_TXD1,
-	PD2_AIN_FEC_TXD2,
-	PD3_AIN_FEC_TXD3,
-	PD4_AOUT_FEC_RX_ER,
-	PD5_AOUT_FEC_RXD1,
-	PD6_AOUT_FEC_RXD2,
-	PD7_AOUT_FEC_RXD3,
-	PD8_AF_FEC_MDIO,
-	PD9_AIN_FEC_MDC,
-	PD10_AOUT_FEC_CRS,
-	PD11_AOUT_FEC_TX_CLK,
-	PD12_AOUT_FEC_RXD0,
-	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_RX_CLK,
-	PD15_AOUT_FEC_COL,
-	PD16_AIN_FEC_TX_ER,
-	PF23_AIN_FEC_TX_EN,
-	/* I2C2 */
-	PC5_PF_I2C2_SDA,
-	PC6_PF_I2C2_SCL,
-	/* FB */
-	PA5_PF_LSCLK,
-	PA6_PF_LD0,
-	PA7_PF_LD1,
-	PA8_PF_LD2,
-	PA9_PF_LD3,
-	PA10_PF_LD4,
-	PA11_PF_LD5,
-	PA12_PF_LD6,
-	PA13_PF_LD7,
-	PA14_PF_LD8,
-	PA15_PF_LD9,
-	PA16_PF_LD10,
-	PA17_PF_LD11,
-	PA18_PF_LD12,
-	PA19_PF_LD13,
-	PA20_PF_LD14,
-	PA21_PF_LD15,
-	PA22_PF_LD16,
-	PA23_PF_LD17,
-	PA24_PF_REV,
-	PA25_PF_CLS,
-	PA26_PF_PS,
-	PA27_PF_SPL_SPR,
-	PA28_PF_HSYNC,
-	PA29_PF_VSYNC,
-	PA30_PF_CONTRAST,
-	PA31_PF_OE_ACD,
-	/* OWIRE */
-	PE16_AF_OWIRE,
-	/* SDHC1*/
-	PE18_PF_SD1_D0,
-	PE19_PF_SD1_D1,
-	PE20_PF_SD1_D2,
-	PE21_PF_SD1_D3,
-	PE22_PF_SD1_CMD,
-	PE23_PF_SD1_CLK,
-	/* SDHC2*/
-	PB4_PF_SD2_D0,
-	PB5_PF_SD2_D1,
-	PB6_PF_SD2_D2,
-	PB7_PF_SD2_D3,
-	PB8_PF_SD2_CMD,
-	PB9_PF_SD2_CLK,
-};
-
-static struct mxc_nand_platform_data mx27ads_nand_board_info = {
-	.width = 1,
-	.hw_ecc = 1,
-};
-
-/* ADS's NOR flash */
-static struct physmap_flash_data mx27ads_flash_data = {
-	.width = 2,
-};
-
-static struct resource mx27ads_flash_resource = {
-	.start = 0xc0000000,
-	.end = 0xc0000000 + 0x02000000 - 1,
-	.flags = IORESOURCE_MEM,
-
-};
-
-static struct platform_device mx27ads_nor_mtd_device = {
-	.name = "physmap-flash",
-	.id = 0,
-	.dev = {
-		.platform_data = &mx27ads_flash_data,
-	},
-	.num_resources = 1,
-	.resource = &mx27ads_flash_resource,
-};
-
-static struct imxi2c_platform_data mx27ads_i2c_data = {
-	.bitrate = 100000,
-};
-
-static struct i2c_board_info mx27ads_i2c_devices[] = {
-};
-
-void lcd_power(int on)
-{
-	if (on)
-		__raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG);
-	else
-		__raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG);
-}
-
-static struct imx_fb_videomode mx27ads_modes[] = {
-	{
-		.mode = {
-			.name		= "Sharp-LQ035Q7",
-			.refresh	= 60,
-			.xres		= 240,
-			.yres		= 320,
-			.pixclock	= 188679, /* in ps (5.3MHz) */
-			.hsync_len	= 1,
-			.left_margin	= 9,
-			.right_margin	= 16,
-			.vsync_len	= 1,
-			.upper_margin	= 7,
-			.lower_margin	= 9,
-		},
-		.bpp		= 16,
-		.pcr		= 0xFB008BC0,
-	},
-};
-
-static struct imx_fb_platform_data mx27ads_fb_data = {
-	.mode = mx27ads_modes,
-	.num_modes = ARRAY_SIZE(mx27ads_modes),
-
-	/*
-	 * - HSYNC active high
-	 * - VSYNC active high
-	 * - clk notenabled while idle
-	 * - clock inverted
-	 * - data not inverted
-	 * - data enable low active
-	 * - enable sharp mode
-	 */
-	.pwmr		= 0x00A903FF,
-	.lscr1		= 0x00120300,
-	.dmacr		= 0x00020010,
-
-	.lcd_power	= lcd_power,
-};
-
-static int mx27ads_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
-			      void *data)
-{
-	return request_irq(IRQ_GPIOE(21), detect_irq, IRQF_TRIGGER_RISING,
-			   "sdhc1-card-detect", data);
-}
-
-static int mx27ads_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
-			      void *data)
-{
-	return request_irq(IRQ_GPIOB(7), detect_irq, IRQF_TRIGGER_RISING,
-			   "sdhc2-card-detect", data);
-}
-
-static void mx27ads_sdhc1_exit(struct device *dev, void *data)
-{
-	free_irq(IRQ_GPIOE(21), data);
-}
-
-static void mx27ads_sdhc2_exit(struct device *dev, void *data)
-{
-	free_irq(IRQ_GPIOB(7), data);
-}
-
-static struct imxmmc_platform_data sdhc1_pdata = {
-	.init = mx27ads_sdhc1_init,
-	.exit = mx27ads_sdhc1_exit,
-};
-
-static struct imxmmc_platform_data sdhc2_pdata = {
-	.init = mx27ads_sdhc2_init,
-	.exit = mx27ads_sdhc2_exit,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
-	&mx27ads_nor_mtd_device,
-	&mxc_fec_device,
-	&mxc_w1_master_device,
-};
-
-static struct imxuart_platform_data uart_pdata[] = {
-	{
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	},
-};
-
-static void __init mx27ads_board_init(void)
-{
-	mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins),
-			"mx27ads");
-
-	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
-	mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
-	mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
-	mxc_register_device(&mxc_uart_device3, &uart_pdata[3]);
-	mxc_register_device(&mxc_uart_device4, &uart_pdata[4]);
-	mxc_register_device(&mxc_uart_device5, &uart_pdata[5]);
-	mxc_register_device(&imx27_nand_device, &mx27ads_nand_board_info);
-
-	/* only the i2c master 1 is used on this CPU card */
-	i2c_register_board_info(1, mx27ads_i2c_devices,
-				ARRAY_SIZE(mx27ads_i2c_devices));
-	mxc_register_device(&mxc_i2c_device1, &mx27ads_i2c_data);
-	mxc_register_device(&mxc_fb_device, &mx27ads_fb_data);
-	mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
-	mxc_register_device(&mxc_sdhc_device1, &sdhc2_pdata);
-
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-}
-
-static void __init mx27ads_timer_init(void)
-{
-	unsigned long fref = 26000000;
-
-	if ((__raw_readw(PBC_VERSION_REG) & CKIH_27MHZ_BIT_SET) == 0)
-		fref = 27000000;
-
-	mx27_clocks_init(fref);
-}
-
-static struct sys_timer mx27ads_timer = {
-	.init	= mx27ads_timer_init,
-};
-
-static struct map_desc mx27ads_io_desc[] __initdata = {
-	{
-		.virtual = PBC_BASE_ADDRESS,
-		.pfn = __phys_to_pfn(MX27_CS4_BASE_ADDR),
-		.length = SZ_1M,
-		.type = MT_DEVICE,
-	},
-};
-
-static void __init mx27ads_map_io(void)
-{
-	mx27_map_io();
-	iotable_init(mx27ads_io_desc, ARRAY_SIZE(mx27ads_io_desc));
-}
-
-MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
-	/* maintainer: Freescale Semiconductor, Inc. */
-	.phys_io        = MX27_AIPI_BASE_ADDR,
-	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = MX27_PHYS_OFFSET + 0x100,
-	.map_io         = mx27ads_map_io,
-	.init_irq       = mx27_init_irq,
-	.init_machine   = mx27ads_board_init,
-	.timer          = &mx27ads_timer,
-MACHINE_END
diff --git a/arch/arm/mach-mx2/mach-mxt_td60.c b/arch/arm/mach-mx2/mach-mxt_td60.c
deleted file mode 100644
index bc38559..0000000
--- a/arch/arm/mach-mx2/mach-mxt_td60.c
+++ /dev/null
@@ -1,295 +0,0 @@
-/*
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *  Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/irq.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <linux/gpio.h>
-#include <mach/imx-uart.h>
-#include <mach/iomux-mx27.h>
-#include <mach/mxc_nand.h>
-#include <mach/i2c.h>
-#include <linux/i2c/pca953x.h>
-#include <mach/imxfb.h>
-#include <mach/mmc.h>
-
-#include "devices.h"
-
-static unsigned int mxt_td60_pins[] __initdata = {
-	/* UART0 */
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	PE14_PF_UART1_CTS,
-	PE15_PF_UART1_RTS,
-	/* UART1 */
-	PE3_PF_UART2_CTS,
-	PE4_PF_UART2_RTS,
-	PE6_PF_UART2_TXD,
-	PE7_PF_UART2_RXD,
-	/* UART2 */
-	PE8_PF_UART3_TXD,
-	PE9_PF_UART3_RXD,
-	PE10_PF_UART3_CTS,
-	PE11_PF_UART3_RTS,
-	/* FEC */
-	PD0_AIN_FEC_TXD0,
-	PD1_AIN_FEC_TXD1,
-	PD2_AIN_FEC_TXD2,
-	PD3_AIN_FEC_TXD3,
-	PD4_AOUT_FEC_RX_ER,
-	PD5_AOUT_FEC_RXD1,
-	PD6_AOUT_FEC_RXD2,
-	PD7_AOUT_FEC_RXD3,
-	PD8_AF_FEC_MDIO,
-	PD9_AIN_FEC_MDC,
-	PD10_AOUT_FEC_CRS,
-	PD11_AOUT_FEC_TX_CLK,
-	PD12_AOUT_FEC_RXD0,
-	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_RX_CLK,
-	PD15_AOUT_FEC_COL,
-	PD16_AIN_FEC_TX_ER,
-	PF23_AIN_FEC_TX_EN,
-	/* I2C1 */
-	PD17_PF_I2C_DATA,
-	PD18_PF_I2C_CLK,
-	/* I2C2 */
-	PC5_PF_I2C2_SDA,
-	PC6_PF_I2C2_SCL,
-	/* FB */
-	PA5_PF_LSCLK,
-	PA6_PF_LD0,
-	PA7_PF_LD1,
-	PA8_PF_LD2,
-	PA9_PF_LD3,
-	PA10_PF_LD4,
-	PA11_PF_LD5,
-	PA12_PF_LD6,
-	PA13_PF_LD7,
-	PA14_PF_LD8,
-	PA15_PF_LD9,
-	PA16_PF_LD10,
-	PA17_PF_LD11,
-	PA18_PF_LD12,
-	PA19_PF_LD13,
-	PA20_PF_LD14,
-	PA21_PF_LD15,
-	PA22_PF_LD16,
-	PA23_PF_LD17,
-	PA25_PF_CLS,
-	PA27_PF_SPL_SPR,
-	PA28_PF_HSYNC,
-	PA29_PF_VSYNC,
-	PA30_PF_CONTRAST,
-	PA31_PF_OE_ACD,
-	/* OWIRE */
-	PE16_AF_OWIRE,
-	/* SDHC1*/
-	PE18_PF_SD1_D0,
-	PE19_PF_SD1_D1,
-	PE20_PF_SD1_D2,
-	PE21_PF_SD1_D3,
-	PE22_PF_SD1_CMD,
-	PE23_PF_SD1_CLK,
-	PF8_AF_ATA_IORDY,
-	/* SDHC2*/
-	PB4_PF_SD2_D0,
-	PB5_PF_SD2_D1,
-	PB6_PF_SD2_D2,
-	PB7_PF_SD2_D3,
-	PB8_PF_SD2_CMD,
-	PB9_PF_SD2_CLK,
-};
-
-static struct mxc_nand_platform_data mxt_td60_nand_board_info = {
-	.width = 1,
-	.hw_ecc = 1,
-};
-
-static struct imxi2c_platform_data mxt_td60_i2c_data = {
-	.bitrate = 100000,
-};
-
-/* PCA9557 */
-static int mxt_td60_pca9557_setup(struct i2c_client *client,
-				unsigned gpio_base, unsigned ngpio,
-				void *context)
-{
-	static int mxt_td60_gpio_value[] = {
-		-1, -1, -1, -1, -1, -1, -1, 1
-	};
-	int n;
-
-	for (n = 0; n < ARRAY_SIZE(mxt_td60_gpio_value); ++n) {
-		gpio_request(gpio_base + n, "MXT_TD60 GPIO Exp");
-		if (mxt_td60_gpio_value[n] < 0)
-			gpio_direction_input(gpio_base + n);
-		else
-			gpio_direction_output(gpio_base + n,
-						mxt_td60_gpio_value[n]);
-		gpio_export(gpio_base + n, 0);
-	}
-
-	return 0;
-}
-
-static struct pca953x_platform_data mxt_td60_pca9557_pdata = {
-	.gpio_base	= 240, /* place PCA9557 after all MX27 gpio pins */
-	.invert		= 0, /* Do not invert */
-	.setup		= mxt_td60_pca9557_setup,
-};
-
-static struct i2c_board_info mxt_td60_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("pca9557", 0x18),
-		.platform_data = &mxt_td60_pca9557_pdata,
-	},
-};
-
-static struct imxi2c_platform_data mxt_td60_i2c2_data = {
-	.bitrate = 100000,
-};
-
-static struct i2c_board_info mxt_td60_i2c2_devices[] = {
-};
-
-static struct imx_fb_videomode mxt_td60_modes[] = {
-	{
-		.mode = {
-			.name		= "Chimei LW700AT9003",
-			.refresh	= 60,
-			.xres		= 800,
-			.yres		= 480,
-			.pixclock	= 30303,
-			.hsync_len	= 64,
-			.left_margin	= 0x67,
-			.right_margin	= 0x68,
-			.vsync_len	= 16,
-			.upper_margin	= 0x0f,
-			.lower_margin	= 0x0f,
-		},
-		.bpp		= 16,
-		.pcr		= 0xFA208B83,
-	},
-};
-
-static struct imx_fb_platform_data mxt_td60_fb_data = {
-	.mode = mxt_td60_modes,
-	.num_modes = ARRAY_SIZE(mxt_td60_modes),
-
-	/*
-	 * - HSYNC active high
-	 * - VSYNC active high
-	 * - clk notenabled while idle
-	 * - clock inverted
-	 * - data not inverted
-	 * - data enable low active
-	 * - enable sharp mode
-	 */
-	.pwmr		= 0x00A903FF,
-	.lscr1		= 0x00120300,
-	.dmacr		= 0x00020010,
-};
-
-static int mxt_td60_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
-				void *data)
-{
-	return request_irq(IRQ_GPIOF(8), detect_irq, IRQF_TRIGGER_FALLING,
-				"sdhc1-card-detect", data);
-}
-
-static void mxt_td60_sdhc1_exit(struct device *dev, void *data)
-{
-	free_irq(IRQ_GPIOF(8), data);
-}
-
-static struct imxmmc_platform_data sdhc1_pdata = {
-	.init = mxt_td60_sdhc1_init,
-	.exit = mxt_td60_sdhc1_exit,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
-	&mxc_fec_device,
-};
-
-static struct imxuart_platform_data uart_pdata[] = {
-	{
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	},
-};
-
-static void __init mxt_td60_board_init(void)
-{
-	mxc_gpio_setup_multiple_pins(mxt_td60_pins, ARRAY_SIZE(mxt_td60_pins),
-			"MXT_TD60");
-
-	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
-	mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
-	mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
-	mxc_register_device(&imx27_nand_device, &mxt_td60_nand_board_info);
-
-	i2c_register_board_info(0, mxt_td60_i2c_devices,
-				ARRAY_SIZE(mxt_td60_i2c_devices));
-
-	i2c_register_board_info(1, mxt_td60_i2c2_devices,
-				ARRAY_SIZE(mxt_td60_i2c2_devices));
-
-	mxc_register_device(&mxc_i2c_device0, &mxt_td60_i2c_data);
-	mxc_register_device(&mxc_i2c_device1, &mxt_td60_i2c2_data);
-	mxc_register_device(&mxc_fb_device, &mxt_td60_fb_data);
-	mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
-
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-}
-
-static void __init mxt_td60_timer_init(void)
-{
-	mx27_clocks_init(26000000);
-}
-
-static struct sys_timer mxt_td60_timer = {
-	.init	= mxt_td60_timer_init,
-};
-
-MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
-	/* maintainer: Maxtrack Industrial */
-	.phys_io	= MX27_AIPI_BASE_ADDR,
-	.io_pg_offst	= ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params	= MX27_PHYS_OFFSET + 0x100,
-	.map_io		= mx27_map_io,
-	.init_irq	= mx27_init_irq,
-	.init_machine	= mxt_td60_board_init,
-	.timer		= &mxt_td60_timer,
-MACHINE_END
-
diff --git a/arch/arm/mach-mx2/mach-pca100.c b/arch/arm/mach-mx2/mach-pca100.c
deleted file mode 100644
index a87422e..0000000
--- a/arch/arm/mach-mx2/mach-pca100.c
+++ /dev/null
@@ -1,396 +0,0 @@
-/*
- * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
- * Copyright (C) 2009 Sascha Hauer (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
-#include <linux/dma-mapping.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/eeprom.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-#include <linux/fsl_devices.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mx27.h>
-#include <mach/i2c.h>
-#include <asm/mach/time.h>
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
-#include <mach/spi.h>
-#endif
-#include <mach/imx-uart.h>
-#include <mach/audmux.h>
-#include <mach/ssi.h>
-#include <mach/mxc_nand.h>
-#include <mach/irqs.h>
-#include <mach/mmc.h>
-#include <mach/mxc_ehci.h>
-#include <mach/ulpi.h>
-
-#include "devices.h"
-
-#define OTG_PHY_CS_GPIO (GPIO_PORTB + 23)
-#define USBH2_PHY_CS_GPIO (GPIO_PORTB + 24)
-
-static int pca100_pins[] = {
-	/* UART1 */
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	PE14_PF_UART1_CTS,
-	PE15_PF_UART1_RTS,
-	/* SDHC */
-	PB4_PF_SD2_D0,
-	PB5_PF_SD2_D1,
-	PB6_PF_SD2_D2,
-	PB7_PF_SD2_D3,
-	PB8_PF_SD2_CMD,
-	PB9_PF_SD2_CLK,
-	/* FEC */
-	PD0_AIN_FEC_TXD0,
-	PD1_AIN_FEC_TXD1,
-	PD2_AIN_FEC_TXD2,
-	PD3_AIN_FEC_TXD3,
-	PD4_AOUT_FEC_RX_ER,
-	PD5_AOUT_FEC_RXD1,
-	PD6_AOUT_FEC_RXD2,
-	PD7_AOUT_FEC_RXD3,
-	PD8_AF_FEC_MDIO,
-	PD9_AIN_FEC_MDC,
-	PD10_AOUT_FEC_CRS,
-	PD11_AOUT_FEC_TX_CLK,
-	PD12_AOUT_FEC_RXD0,
-	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_RX_CLK,
-	PD15_AOUT_FEC_COL,
-	PD16_AIN_FEC_TX_ER,
-	PF23_AIN_FEC_TX_EN,
-	/* SSI1 */
-	PC20_PF_SSI1_FS,
-	PC21_PF_SSI1_RXD,
-	PC22_PF_SSI1_TXD,
-	PC23_PF_SSI1_CLK,
-	/* onboard I2C */
-	PC5_PF_I2C2_SDA,
-	PC6_PF_I2C2_SCL,
-	/* external I2C */
-	PD17_PF_I2C_DATA,
-	PD18_PF_I2C_CLK,
-	/* SPI1 */
-	PD25_PF_CSPI1_RDY,
-	PD29_PF_CSPI1_SCLK,
-	PD30_PF_CSPI1_MISO,
-	PD31_PF_CSPI1_MOSI,
-	/* OTG */
-	OTG_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT,
-	PC7_PF_USBOTG_DATA5,
-	PC8_PF_USBOTG_DATA6,
-	PC9_PF_USBOTG_DATA0,
-	PC10_PF_USBOTG_DATA2,
-	PC11_PF_USBOTG_DATA1,
-	PC12_PF_USBOTG_DATA4,
-	PC13_PF_USBOTG_DATA3,
-	PE0_PF_USBOTG_NXT,
-	PE1_PF_USBOTG_STP,
-	PE2_PF_USBOTG_DIR,
-	PE24_PF_USBOTG_CLK,
-	PE25_PF_USBOTG_DATA7,
-	/* USBH2 */
-	USBH2_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT,
-	PA0_PF_USBH2_CLK,
-	PA1_PF_USBH2_DIR,
-	PA2_PF_USBH2_DATA7,
-	PA3_PF_USBH2_NXT,
-	PA4_PF_USBH2_STP,
-	PD19_AF_USBH2_DATA4,
-	PD20_AF_USBH2_DATA3,
-	PD21_AF_USBH2_DATA6,
-	PD22_AF_USBH2_DATA0,
-	PD23_AF_USBH2_DATA2,
-	PD24_AF_USBH2_DATA1,
-	PD26_AF_USBH2_DATA5,
-};
-
-static struct imxuart_platform_data uart_pdata = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct mxc_nand_platform_data pca100_nand_board_info = {
-	.width = 1,
-	.hw_ecc = 1,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
-	&mxc_w1_master_device,
-	&mxc_fec_device,
-	&mxc_wdt,
-};
-
-static struct imxi2c_platform_data pca100_i2c_1_data = {
-	.bitrate = 100000,
-};
-
-static struct at24_platform_data board_eeprom = {
-	.byte_len = 4096,
-	.page_size = 32,
-	.flags = AT24_FLAG_ADDR16,
-};
-
-static struct i2c_board_info pca100_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
-		.platform_data = &board_eeprom,
-	}, {
-		I2C_BOARD_INFO("rtc-pcf8563", 0x51),
-		.type = "pcf8563"
-	}, {
-		I2C_BOARD_INFO("lm75", 0x4a),
-		.type = "lm75"
-	}
-};
-
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
-static struct spi_eeprom at25320 = {
-	.name		= "at25320an",
-	.byte_len	= 4096,
-	.page_size	= 32,
-	.flags		= EE_ADDR2,
-};
-
-static struct spi_board_info pca100_spi_board_info[] __initdata = {
-	{
-		.modalias = "at25",
-		.max_speed_hz = 30000,
-		.bus_num = 0,
-		.chip_select = 1,
-		.platform_data = &at25320,
-	},
-};
-
-static int pca100_spi_cs[] = {GPIO_PORTD + 28, GPIO_PORTD + 27};
-
-static struct spi_imx_master pca100_spi_0_data = {
-	.chipselect	= pca100_spi_cs,
-	.num_chipselect = ARRAY_SIZE(pca100_spi_cs),
-};
-#endif
-
-static void pca100_ac97_warm_reset(struct snd_ac97 *ac97)
-{
-	mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT);
-	gpio_set_value(GPIO_PORTC + 20, 1);
-	udelay(2);
-	gpio_set_value(GPIO_PORTC + 20, 0);
-	mxc_gpio_mode(PC20_PF_SSI1_FS);
-	msleep(2);
-}
-
-static void pca100_ac97_cold_reset(struct snd_ac97 *ac97)
-{
-	mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT);  /* FS */
-	gpio_set_value(GPIO_PORTC + 20, 0);
-	mxc_gpio_mode(GPIO_PORTC | 22 | GPIO_GPIO | GPIO_OUT);  /* TX */
-	gpio_set_value(GPIO_PORTC + 22, 0);
-	mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_OUT);  /* reset */
-	gpio_set_value(GPIO_PORTC + 28, 0);
-	udelay(10);
-	gpio_set_value(GPIO_PORTC + 28, 1);
-	mxc_gpio_mode(PC20_PF_SSI1_FS);
-	mxc_gpio_mode(PC22_PF_SSI1_TXD);
-	msleep(2);
-}
-
-static struct imx_ssi_platform_data pca100_ssi_pdata = {
-	.ac97_reset		= pca100_ac97_cold_reset,
-	.ac97_warm_reset	= pca100_ac97_warm_reset,
-	.flags			= IMX_SSI_USE_AC97,
-};
-
-static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
-		void *data)
-{
-	int ret;
-
-	ret = request_irq(IRQ_GPIOC(29), detect_irq,
-			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
-			  "imx-mmc-detect", data);
-	if (ret)
-		printk(KERN_ERR
-			"pca100: Failed to reuest irq for sd/mmc detection\n");
-
-	return ret;
-}
-
-static void pca100_sdhc2_exit(struct device *dev, void *data)
-{
-	free_irq(IRQ_GPIOC(29), data);
-}
-
-static struct imxmmc_platform_data sdhc_pdata = {
-	.init = pca100_sdhc2_init,
-	.exit = pca100_sdhc2_exit,
-};
-
-static int otg_phy_init(struct platform_device *pdev)
-{
-	gpio_set_value(OTG_PHY_CS_GPIO, 0);
-	return 0;
-}
-
-static struct mxc_usbh_platform_data otg_pdata = {
-	.init	= otg_phy_init,
-	.portsc	= MXC_EHCI_MODE_ULPI,
-	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
-};
-
-static int usbh2_phy_init(struct platform_device *pdev)
-{
-	gpio_set_value(USBH2_PHY_CS_GPIO, 0);
-	return 0;
-}
-
-static struct mxc_usbh_platform_data usbh2_pdata = {
-	.init	= usbh2_phy_init,
-	.portsc	= MXC_EHCI_MODE_ULPI,
-	.flags	= MXC_EHCI_INTERFACE_DIFF_UNI,
-};
-
-static struct fsl_usb2_platform_data otg_device_pdata = {
-	.operating_mode = FSL_USB2_DR_DEVICE,
-	.phy_mode       = FSL_USB2_PHY_ULPI,
-};
-
-static int otg_mode_host;
-
-static int __init pca100_otg_mode(char *options)
-{
-	if (!strcmp(options, "host"))
-		otg_mode_host = 1;
-	else if (!strcmp(options, "device"))
-		otg_mode_host = 0;
-	else
-		pr_info("otg_mode neither \"host\" nor \"device\". "
-			"Defaulting to device\n");
-	return 0;
-}
-__setup("otg_mode=", pca100_otg_mode);
-
-static void __init pca100_init(void)
-{
-	int ret;
-
-	/* SSI unit */
-	mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0,
-				  MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */
-				  MXC_AUDMUX_V1_PCR_TFCSEL(3) |
-				  MXC_AUDMUX_V1_PCR_TCLKDIR | /* clock is output */
-				  MXC_AUDMUX_V1_PCR_RXDSEL(3));
-	mxc_audmux_v1_configure_port(3,
-				  MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */
-				  MXC_AUDMUX_V1_PCR_TFCSEL(0) |
-				  MXC_AUDMUX_V1_PCR_TFSDIR |
-				  MXC_AUDMUX_V1_PCR_RXDSEL(0));
-
-	ret = mxc_gpio_setup_multiple_pins(pca100_pins,
-			ARRAY_SIZE(pca100_pins), "PCA100");
-	if (ret)
-		printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret);
-
-	mxc_register_device(&imx_ssi_device0, &pca100_ssi_pdata);
-
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-
-	mxc_gpio_mode(GPIO_PORTC | 29 | GPIO_GPIO | GPIO_IN);
-	mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
-
-	mxc_register_device(&imx27_nand_device, &pca100_nand_board_info);
-
-	/* only the i2c master 1 is used on this CPU card */
-	i2c_register_board_info(1, pca100_i2c_devices,
-				ARRAY_SIZE(pca100_i2c_devices));
-
-	mxc_register_device(&mxc_i2c_device1, &pca100_i2c_1_data);
-
-	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
-	mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_OUT);
-
-	/* GPIO0_IRQ */
-	mxc_gpio_mode(GPIO_PORTC | 31 | GPIO_GPIO | GPIO_IN);
-	/* GPIO1_IRQ */
-	mxc_gpio_mode(GPIO_PORTC | 25 | GPIO_GPIO | GPIO_IN);
-	/* GPIO2_IRQ */
-	mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_IN);
-
-#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
-	spi_register_board_info(pca100_spi_board_info,
-				ARRAY_SIZE(pca100_spi_board_info));
-	mxc_register_device(&mxc_spi_device0, &pca100_spi_0_data);
-#endif
-
-	gpio_request(OTG_PHY_CS_GPIO, "usb-otg-cs");
-	gpio_direction_output(OTG_PHY_CS_GPIO, 1);
-	gpio_request(USBH2_PHY_CS_GPIO, "usb-host2-cs");
-	gpio_direction_output(USBH2_PHY_CS_GPIO, 1);
-
-#if defined(CONFIG_USB_ULPI)
-	if (otg_mode_host) {
-		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
-
-		mxc_register_device(&mxc_otg_host, &otg_pdata);
-	}
-
-	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
-
-	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
-#endif
-	if (!otg_mode_host) {
-		gpio_set_value(OTG_PHY_CS_GPIO, 0);
-		mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
-	}
-
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-}
-
-static void __init pca100_timer_init(void)
-{
-	mx27_clocks_init(26000000);
-}
-
-static struct sys_timer pca100_timer = {
-	.init = pca100_timer_init,
-};
-
-MACHINE_START(PCA100, "phyCARD-i.MX27")
-	.phys_io        = MX27_AIPI_BASE_ADDR,
-	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = MX27_PHYS_OFFSET + 0x100,
-	.map_io         = mx27_map_io,
-	.init_irq       = mx27_init_irq,
-	.init_machine   = pca100_init,
-	.timer          = &pca100_timer,
-MACHINE_END
-
diff --git a/arch/arm/mach-mx2/mach-pcm038.c b/arch/arm/mach-mx2/mach-pcm038.c
deleted file mode 100644
index 36c8943..0000000
--- a/arch/arm/mach-mx2/mach-pcm038.c
+++ /dev/null
@@ -1,359 +0,0 @@
-/*
- * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/i2c.h>
-#include <linux/i2c/at24.h>
-#include <linux/io.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/machine.h>
-#include <linux/mfd/mc13783.h>
-#include <linux/spi/spi.h>
-#include <linux/irq.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include <mach/board-pcm038.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/i2c.h>
-#include <mach/iomux-mx27.h>
-#include <mach/imx-uart.h>
-#include <mach/mxc_nand.h>
-#include <mach/spi.h>
-#include <mach/mxc_ehci.h>
-#include <mach/ulpi.h>
-
-#include "devices.h"
-
-static int pcm038_pins[] = {
-	/* UART1 */
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	PE14_PF_UART1_CTS,
-	PE15_PF_UART1_RTS,
-	/* UART2 */
-	PE3_PF_UART2_CTS,
-	PE4_PF_UART2_RTS,
-	PE6_PF_UART2_TXD,
-	PE7_PF_UART2_RXD,
-	/* UART3 */
-	PE8_PF_UART3_TXD,
-	PE9_PF_UART3_RXD,
-	PE10_PF_UART3_CTS,
-	PE11_PF_UART3_RTS,
-	/* FEC */
-	PD0_AIN_FEC_TXD0,
-	PD1_AIN_FEC_TXD1,
-	PD2_AIN_FEC_TXD2,
-	PD3_AIN_FEC_TXD3,
-	PD4_AOUT_FEC_RX_ER,
-	PD5_AOUT_FEC_RXD1,
-	PD6_AOUT_FEC_RXD2,
-	PD7_AOUT_FEC_RXD3,
-	PD8_AF_FEC_MDIO,
-	PD9_AIN_FEC_MDC,
-	PD10_AOUT_FEC_CRS,
-	PD11_AOUT_FEC_TX_CLK,
-	PD12_AOUT_FEC_RXD0,
-	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_RX_CLK,
-	PD15_AOUT_FEC_COL,
-	PD16_AIN_FEC_TX_ER,
-	PF23_AIN_FEC_TX_EN,
-	/* I2C2 */
-	PC5_PF_I2C2_SDA,
-	PC6_PF_I2C2_SCL,
-	/* SPI1 */
-	PD25_PF_CSPI1_RDY,
-	PD29_PF_CSPI1_SCLK,
-	PD30_PF_CSPI1_MISO,
-	PD31_PF_CSPI1_MOSI,
-	/* SSI1 */
-	PC20_PF_SSI1_FS,
-	PC21_PF_SSI1_RXD,
-	PC22_PF_SSI1_TXD,
-	PC23_PF_SSI1_CLK,
-	/* SSI4 */
-	PC16_PF_SSI4_FS,
-	PC17_PF_SSI4_RXD,
-	PC18_PF_SSI4_TXD,
-	PC19_PF_SSI4_CLK,
-	/* USB host */
-	PA0_PF_USBH2_CLK,
-	PA1_PF_USBH2_DIR,
-	PA2_PF_USBH2_DATA7,
-	PA3_PF_USBH2_NXT,
-	PA4_PF_USBH2_STP,
-	PD19_AF_USBH2_DATA4,
-	PD20_AF_USBH2_DATA3,
-	PD21_AF_USBH2_DATA6,
-	PD22_AF_USBH2_DATA0,
-	PD23_AF_USBH2_DATA2,
-	PD24_AF_USBH2_DATA1,
-	PD26_AF_USBH2_DATA5,
-};
-
-/*
- * Phytec's PCM038 comes with 2MiB battery buffered SRAM,
- * 16 bit width
- */
-
-static struct platdata_mtd_ram pcm038_sram_data = {
-	.bankwidth = 2,
-};
-
-static struct resource pcm038_sram_resource = {
-	.start = MX27_CS1_BASE_ADDR,
-	.end   = MX27_CS1_BASE_ADDR + 512 * 1024 - 1,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platform_device pcm038_sram_mtd_device = {
-	.name = "mtd-ram",
-	.id = 0,
-	.dev = {
-		.platform_data = &pcm038_sram_data,
-	},
-	.num_resources = 1,
-	.resource = &pcm038_sram_resource,
-};
-
-/*
- * Phytec's phyCORE-i.MX27 comes with 32MiB flash,
- * 16 bit width
- */
-static struct physmap_flash_data pcm038_flash_data = {
-	.width = 2,
-};
-
-static struct resource pcm038_flash_resource = {
-	.start = 0xc0000000,
-	.end   = 0xc1ffffff,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platform_device pcm038_nor_mtd_device = {
-	.name = "physmap-flash",
-	.id = 0,
-	.dev = {
-		.platform_data = &pcm038_flash_data,
-	},
-	.num_resources = 1,
-	.resource = &pcm038_flash_resource,
-};
-
-static struct imxuart_platform_data uart_pdata[] = {
-	{
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	},
-};
-
-static struct mxc_nand_platform_data pcm038_nand_board_info = {
-	.width = 1,
-	.hw_ecc = 1,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
-	&pcm038_nor_mtd_device,
-	&mxc_w1_master_device,
-	&mxc_fec_device,
-	&pcm038_sram_mtd_device,
-	&mxc_wdt,
-};
-
-/* On pcm038 there's a sram attached to CS1, we enable the chipselect here and
- * setup other stuffs to access the sram. */
-static void __init pcm038_init_sram(void)
-{
-	mx27_setup_weimcs(1, 0x0000d843, 0x22252521, 0x22220a00);
-}
-
-static struct imxi2c_platform_data pcm038_i2c_1_data = {
-	.bitrate = 100000,
-};
-
-static struct at24_platform_data board_eeprom = {
-	.byte_len = 4096,
-	.page_size = 32,
-	.flags = AT24_FLAG_ADDR16,
-};
-
-static struct i2c_board_info pcm038_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
-		.platform_data = &board_eeprom,
-	}, {
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	}, {
-		I2C_BOARD_INFO("lm75", 0x4a),
-	}
-};
-
-static int pcm038_spi_cs[] = {GPIO_PORTD + 28};
-
-static struct spi_imx_master pcm038_spi_0_data = {
-	.chipselect = pcm038_spi_cs,
-	.num_chipselect = ARRAY_SIZE(pcm038_spi_cs),
-};
-
-static struct regulator_consumer_supply sdhc1_consumers[] = {
-	{
-		.dev	= &mxc_sdhc_device1.dev,
-		.supply	= "sdhc_vcc",
-	},
-};
-
-static struct regulator_init_data sdhc1_data = {
-	.constraints = {
-		.min_uV = 3000000,
-		.max_uV = 3400000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
-		.valid_modes_mask = REGULATOR_MODE_NORMAL |
-			REGULATOR_MODE_FAST,
-		.always_on = 0,
-		.boot_on = 0,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(sdhc1_consumers),
-	.consumer_supplies = sdhc1_consumers,
-};
-
-static struct regulator_consumer_supply cam_consumers[] = {
-	{
-		.dev	= NULL,
-		.supply	= "imx_cam_vcc",
-	},
-};
-
-static struct regulator_init_data cam_data = {
-	.constraints = {
-		.min_uV = 3000000,
-		.max_uV = 3400000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
-		.valid_modes_mask = REGULATOR_MODE_NORMAL |
-			REGULATOR_MODE_FAST,
-		.always_on = 0,
-		.boot_on = 0,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(cam_consumers),
-	.consumer_supplies = cam_consumers,
-};
-
-struct mc13783_regulator_init_data pcm038_regulators[] = {
-	{
-		.id = MC13783_REGU_VCAM,
-		.init_data = &cam_data,
-	}, {
-		.id = MC13783_REGU_VMMC1,
-		.init_data = &sdhc1_data,
-	},
-};
-
-static struct mc13783_platform_data pcm038_pmic = {
-	.regulators = pcm038_regulators,
-	.num_regulators = ARRAY_SIZE(pcm038_regulators),
-	.flags = MC13783_USE_ADC | MC13783_USE_REGULATOR |
-		 MC13783_USE_TOUCHSCREEN,
-};
-
-static struct spi_board_info pcm038_spi_board_info[] __initdata = {
-	{
-		.modalias = "mc13783",
-		.irq = IRQ_GPIOB(23),
-		.max_speed_hz = 300000,
-		.bus_num = 0,
-		.chip_select = 0,
-		.platform_data = &pcm038_pmic,
-		.mode = SPI_CS_HIGH,
-	}
-};
-
-static struct mxc_usbh_platform_data usbh2_pdata = {
-	.portsc	= MXC_EHCI_MODE_ULPI,
-	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
-};
-
-static void __init pcm038_init(void)
-{
-	mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins),
-			"PCM038");
-
-	pcm038_init_sram();
-
-	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
-	mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
-	mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
-
-	mxc_gpio_mode(PE16_AF_OWIRE);
-	mxc_register_device(&imx27_nand_device, &pcm038_nand_board_info);
-
-	/* only the i2c master 1 is used on this CPU card */
-	i2c_register_board_info(1, pcm038_i2c_devices,
-				ARRAY_SIZE(pcm038_i2c_devices));
-
-	mxc_register_device(&mxc_i2c_device1, &pcm038_i2c_1_data);
-
-	/* PE18 for user-LED D40 */
-	mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT);
-
-	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
-
-	/* MC13783 IRQ */
-	mxc_gpio_mode(GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN);
-
-	mxc_register_device(&mxc_spi_device0, &pcm038_spi_0_data);
-	spi_register_board_info(pcm038_spi_board_info,
-				ARRAY_SIZE(pcm038_spi_board_info));
-
-	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
-
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-
-#ifdef CONFIG_MACH_PCM970_BASEBOARD
-	pcm970_baseboard_init();
-#endif
-}
-
-static void __init pcm038_timer_init(void)
-{
-	mx27_clocks_init(26000000);
-}
-
-static struct sys_timer pcm038_timer = {
-	.init = pcm038_timer_init,
-};
-
-MACHINE_START(PCM038, "phyCORE-i.MX27")
-	.phys_io        = MX27_AIPI_BASE_ADDR,
-	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
-	.boot_params    = MX27_PHYS_OFFSET + 0x100,
-	.map_io         = mx27_map_io,
-	.init_irq       = mx27_init_irq,
-	.init_machine   = pcm038_init,
-	.timer          = &pcm038_timer,
-MACHINE_END
diff --git a/arch/arm/mach-mx2/mm-imx21.c b/arch/arm/mach-mx2/mm-imx21.c
deleted file mode 100644
index 6413431..0000000
--- a/arch/arm/mach-mx2/mm-imx21.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * arch/arm/mach-mx2/mm-imx21.c
- *
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <asm/pgtable.h>
-#include <asm/mach/map.h>
-
-/* MX21 memory map definition */
-static struct map_desc imx21_io_desc[] __initdata = {
-	/*
-	 * this fixed mapping covers:
-	 * - AIPI1
-	 * - AIPI2
-	 * - AITC
-	 * - ROM Patch
-	 * - and some reserved space
-	 */
-	{
-		.virtual = MX21_AIPI_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(MX21_AIPI_BASE_ADDR),
-		.length = MX21_AIPI_SIZE,
-		.type = MT_DEVICE
-	},
-	/*
-	 * this fixed mapping covers:
-	 * - CSI
-	 * - ATA
-	 */
-	{
-		.virtual = MX21_SAHB1_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(MX21_SAHB1_BASE_ADDR),
-		.length = MX21_SAHB1_SIZE,
-		.type = MT_DEVICE
-	},
-	/*
-	 * this fixed mapping covers:
-	 * - EMI
-	 */
-	{
-		.virtual = MX21_X_MEMC_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(MX21_X_MEMC_BASE_ADDR),
-		.length = MX21_X_MEMC_SIZE,
-		.type = MT_DEVICE
-	},
-};
-
-/*
- * Initialize the memory map. It is called during the
- * system startup to create static physical to virtual
- * memory map for the IO modules.
- */
-void __init mx21_map_io(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MX21);
-	mxc_arch_reset_init(MX21_IO_ADDRESS(MX21_WDOG_BASE_ADDR));
-
-	iotable_init(imx21_io_desc, ARRAY_SIZE(imx21_io_desc));
-}
-
-void __init mx21_init_irq(void)
-{
-	mxc_init_irq(MX21_IO_ADDRESS(MX21_AVIC_BASE_ADDR));
-}
diff --git a/arch/arm/mach-mx2/mm-imx27.c b/arch/arm/mach-mx2/mm-imx27.c
deleted file mode 100644
index 3366ed4..0000000
--- a/arch/arm/mach-mx2/mm-imx27.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * arch/arm/mach-mx2/mm-imx27.c
- *
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <asm/pgtable.h>
-#include <asm/mach/map.h>
-
-/* MX27 memory map definition */
-static struct map_desc imx27_io_desc[] __initdata = {
-	/*
-	 * this fixed mapping covers:
-	 * - AIPI1
-	 * - AIPI2
-	 * - AITC
-	 * - ROM Patch
-	 * - and some reserved space
-	 */
-	{
-		.virtual = MX27_AIPI_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(MX27_AIPI_BASE_ADDR),
-		.length = MX27_AIPI_SIZE,
-		.type = MT_DEVICE
-	},
-	/*
-	 * this fixed mapping covers:
-	 * - CSI
-	 * - ATA
-	 */
-	{
-		.virtual = MX27_SAHB1_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(MX27_SAHB1_BASE_ADDR),
-		.length = MX27_SAHB1_SIZE,
-		.type = MT_DEVICE
-	},
-	/*
-	 * this fixed mapping covers:
-	 * - EMI
-	 */
-	{
-		.virtual = MX27_X_MEMC_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(MX27_X_MEMC_BASE_ADDR),
-		.length = MX27_X_MEMC_SIZE,
-		.type = MT_DEVICE
-	},
-};
-
-/*
- * Initialize the memory map. It is called during the
- * system startup to create static physical to virtual
- * memory map for the IO modules.
- */
-void __init mx27_map_io(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MX27);
-	mxc_arch_reset_init(MX27_IO_ADDRESS(MX27_WDOG_BASE_ADDR));
-
-	iotable_init(imx27_io_desc, ARRAY_SIZE(imx27_io_desc));
-}
-
-void __init mx27_init_irq(void)
-{
-	mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR));
-}
diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c
deleted file mode 100644
index f490a40..0000000
--- a/arch/arm/mach-mx2/pcm970-baseboard.c
+++ /dev/null
@@ -1,233 +0,0 @@
-/*
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/can/platform/sja1000.h>
-
-#include <asm/mach/arch.h>
-
-#include <mach/common.h>
-#include <mach/iomux-mx27.h>
-#include <mach/imxfb.h>
-#include <mach/hardware.h>
-#include <mach/mmc.h>
-
-#include "devices.h"
-
-static int pcm970_pins[] = {
-	/* SDHC */
-	PB4_PF_SD2_D0,
-	PB5_PF_SD2_D1,
-	PB6_PF_SD2_D2,
-	PB7_PF_SD2_D3,
-	PB8_PF_SD2_CMD,
-	PB9_PF_SD2_CLK,
-	/* display */
-	PA5_PF_LSCLK,
-	PA6_PF_LD0,
-	PA7_PF_LD1,
-	PA8_PF_LD2,
-	PA9_PF_LD3,
-	PA10_PF_LD4,
-	PA11_PF_LD5,
-	PA12_PF_LD6,
-	PA13_PF_LD7,
-	PA14_PF_LD8,
-	PA15_PF_LD9,
-	PA16_PF_LD10,
-	PA17_PF_LD11,
-	PA18_PF_LD12,
-	PA19_PF_LD13,
-	PA20_PF_LD14,
-	PA21_PF_LD15,
-	PA22_PF_LD16,
-	PA23_PF_LD17,
-	PA24_PF_REV,
-	PA25_PF_CLS,
-	PA26_PF_PS,
-	PA27_PF_SPL_SPR,
-	PA28_PF_HSYNC,
-	PA29_PF_VSYNC,
-	PA30_PF_CONTRAST,
-	PA31_PF_OE_ACD,
-	/*
-	 * it seems the data line misses a pullup, so we must enable
-	 * the internal pullup as a local workaround
-	 */
-	PD17_PF_I2C_DATA | GPIO_PUEN,
-	PD18_PF_I2C_CLK,
-	/* Camera */
-	PB10_PF_CSI_D0,
-	PB11_PF_CSI_D1,
-	PB12_PF_CSI_D2,
-	PB13_PF_CSI_D3,
-	PB14_PF_CSI_D4,
-	PB15_PF_CSI_MCLK,
-	PB16_PF_CSI_PIXCLK,
-	PB17_PF_CSI_D5,
-	PB18_PF_CSI_D6,
-	PB19_PF_CSI_D7,
-	PB20_PF_CSI_VSYNC,
-	PB21_PF_CSI_HSYNC,
-};
-
-static int pcm970_sdhc2_get_ro(struct device *dev)
-{
-	return gpio_get_value(GPIO_PORTC + 28);
-}
-
-static int pcm970_sdhc2_init(struct device *dev, irq_handler_t detect_irq, void *data)
-{
-	int ret;
-
-	ret = request_irq(IRQ_GPIOC(29), detect_irq, IRQF_TRIGGER_FALLING,
-				"imx-mmc-detect", data);
-	if (ret)
-		return ret;
-
-	ret = gpio_request(GPIO_PORTC + 28, "imx-mmc-ro");
-	if (ret) {
-		free_irq(IRQ_GPIOC(29), data);
-		return ret;
-	}
-
-	gpio_direction_input(GPIO_PORTC + 28);
-
-	return 0;
-}
-
-static void pcm970_sdhc2_exit(struct device *dev, void *data)
-{
-	free_irq(IRQ_GPIOC(29), data);
-	gpio_free(GPIO_PORTC + 28);
-}
-
-static struct imxmmc_platform_data sdhc_pdata = {
-	.get_ro = pcm970_sdhc2_get_ro,
-	.init = pcm970_sdhc2_init,
-	.exit = pcm970_sdhc2_exit,
-};
-
-static struct imx_fb_videomode pcm970_modes[] = {
-	{
-		.mode = {
-			.name		= "Sharp-LQ035Q7",
-			.refresh	= 60,
-			.xres		= 240,
-			.yres		= 320,
-			.pixclock	= 188679, /* in ps (5.3MHz) */
-			.hsync_len	= 7,
-			.left_margin	= 5,
-			.right_margin	= 16,
-			.vsync_len	= 1,
-			.upper_margin	= 7,
-			.lower_margin	= 9,
-		},
-		/*
-		 * - HSYNC active high
-		 * - VSYNC active high
-		 * - clk notenabled while idle
-		 * - clock not inverted
-		 * - data not inverted
-		 * - data enable low active
-		 * - enable sharp mode
-		 */
-		.pcr		= 0xF00080C0,
-		.bpp		= 16,
-	}, {
-		.mode = {
-			.name		= "TX090",
-			.refresh	= 60,
-			.xres		= 240,
-			.yres		= 320,
-			.pixclock	= 38255,
-			.left_margin	= 144,
-			.right_margin	= 0,
-			.upper_margin	= 7,
-			.lower_margin	= 40,
-			.hsync_len	= 96,
-			.vsync_len	= 1,
-		},
-		/*
-		 * - HSYNC active low (1 << 22)
-		 * - VSYNC active low (1 << 23)
-		 * - clk notenabled while idle
-		 * - clock not inverted
-		 * - data not inverted
-		 * - data enable low active
-		 * - enable sharp mode
-		 */
-		.pcr = 0xF0008080 | (1<<22) | (1<<23) | (1<<19),
-		.bpp = 32,
-	},
-};
-
-static struct imx_fb_platform_data pcm038_fb_data = {
-	.mode = pcm970_modes,
-	.num_modes = ARRAY_SIZE(pcm970_modes),
-
-	.pwmr		= 0x00A903FF,
-	.lscr1		= 0x00120300,
-	.dmacr		= 0x00020010,
-};
-
-static struct resource pcm970_sja1000_resources[] = {
-	{
-		.start   = MX27_CS4_BASE_ADDR,
-		.end     = MX27_CS4_BASE_ADDR + 0x100 - 1,
-		.flags   = IORESOURCE_MEM,
-	}, {
-		.start   = IRQ_GPIOE(19),
-		.end     = IRQ_GPIOE(19),
-		.flags   = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-struct sja1000_platform_data pcm970_sja1000_platform_data = {
-	.osc_freq	= 16000000,
-	.ocr		= OCR_TX1_PULLDOWN | OCR_TX0_PUSHPULL,
-	.cdr		= CDR_CBP,
-};
-
-static struct platform_device pcm970_sja1000 = {
-	.name = "sja1000_platform",
-	.dev = {
-		.platform_data = &pcm970_sja1000_platform_data,
-	},
-	.resource = pcm970_sja1000_resources,
-	.num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
-};
-
-/*
- * system init for baseboard usage. Will be called by pcm038 init.
- *
- * Add platform devices present on this baseboard and init
- * them from CPU side as far as required to use them later on
- */
-void __init pcm970_baseboard_init(void)
-{
-	mxc_gpio_setup_multiple_pins(pcm970_pins, ARRAY_SIZE(pcm970_pins),
-			"PCM970");
-
-	mxc_register_device(&mxc_fb_device, &pcm038_fb_data);
-	mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN);
-	mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
-	platform_device_register(&pcm970_sja1000);
-}
diff --git a/arch/arm/mach-mx2/serial.c b/arch/arm/mach-mx2/serial.c
deleted file mode 100644
index 1c0c835..0000000
--- a/arch/arm/mach-mx2/serial.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/serial.h>
-#include <mach/hardware.h>
-#include <mach/imx-uart.h>
-#include "devices.h"
-
-static struct resource uart0[] = {
-	{
-		.start = MX2x_UART1_BASE_ADDR,
-		.end = MX2x_UART1_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX2x_INT_UART1,
-		.end = MX2x_INT_UART1,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device0 = {
-	.name = "imx-uart",
-	.id = 0,
-	.resource = uart0,
-	.num_resources = ARRAY_SIZE(uart0),
-};
-
-static struct resource uart1[] = {
-	{
-		.start = MX2x_UART2_BASE_ADDR,
-		.end = MX2x_UART2_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX2x_INT_UART2,
-		.end = MX2x_INT_UART2,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device1 = {
-	.name = "imx-uart",
-	.id = 1,
-	.resource = uart1,
-	.num_resources = ARRAY_SIZE(uart1),
-};
-
-static struct resource uart2[] = {
-	{
-		.start = MX2x_UART3_BASE_ADDR,
-		.end = MX2x_UART3_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX2x_INT_UART3,
-		.end = MX2x_INT_UART3,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device2 = {
-	.name = "imx-uart",
-	.id = 2,
-	.resource = uart2,
-	.num_resources = ARRAY_SIZE(uart2),
-};
-
-static struct resource uart3[] = {
-	{
-		.start = MX2x_UART4_BASE_ADDR,
-		.end = MX2x_UART4_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX2x_INT_UART4,
-		.end = MX2x_INT_UART4,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device3 = {
-	.name = "imx-uart",
-	.id = 3,
-	.resource = uart3,
-	.num_resources = ARRAY_SIZE(uart3),
-};
-
-#ifdef CONFIG_MACH_MX27
-static struct resource uart4[] = {
-	{
-		.start = MX27_UART5_BASE_ADDR,
-		.end = MX27_UART5_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX27_INT_UART5,
-		.end = MX27_INT_UART5,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device4 = {
-	.name = "imx-uart",
-	.id = 4,
-	.resource = uart4,
-	.num_resources = ARRAY_SIZE(uart4),
-};
-
-static struct resource uart5[] = {
-	{
-		.start = MX27_UART6_BASE_ADDR,
-		.end = MX27_UART6_BASE_ADDR + 0x0B5,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = MX27_INT_UART6,
-		.end = MX27_INT_UART6,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_uart_device5 = {
-	.name = "imx-uart",
-	.id = 5,
-	.resource = uart5,
-	.num_resources = ARRAY_SIZE(uart5),
-};
-#endif