summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-kirkwood
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-12-13 10:39:26 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2012-12-13 10:39:26 -0800
commitdb5b0ae00712b5176d7405e7a1dd2bfd6e8f5070 (patch)
tree4e874d81ca9037dda1007178bbc9613649d43305 /arch/arm/mach-kirkwood
parent6be35c700f742e911ecedd07fcc43d4439922334 (diff)
parent64507dd7028e3e0145077e73b8374bd75aea117c (diff)
downloadop-kernel-dev-db5b0ae00712b5176d7405e7a1dd2bfd6e8f5070.zip
op-kernel-dev-db5b0ae00712b5176d7405e7a1dd2bfd6e8f5070.tar.gz
Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC device tree conversions and enablement from Olof Johansson: "Continued device tree conversion and enablement across a number of platforms; Kirkwood, tegra, i.MX, Exynos, zynq and a couple of other smaller series as well. ux500 has seen continued conversion for platforms. Several platforms have seen pinctrl-via-devicetree conversions for simpler multiplatform. Tegra is adding data for new devices/drivers, and Exynos has a bunch of new bindings and devices added as well. So, pretty much the same progression in the right direction as the last few releases." Fix up conflicts as per Olof. * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (185 commits) ARM: ux500: Rename dbx500 cpufreq code to be more generic ARM: dts: add missing ux500 device trees ARM: ux500: Stop registering the PCM driver from platform code ARM: ux500: Move board specific GPIO info out to subordinate DTS files ARM: ux500: Disable the MMCI gpio-regulator by default ARM: Kirkwood: remove kirkwood_ehci_init() from new boards ARM: Kirkwood: Add support LED of OpenBlocks A6 ARM: Kirkwood: Convert to EHCI via DT for OpenBlocks A6 ARM: kirkwood: Add NAND partiton map for OpenBlocks A6 ARM: kirkwood: Add support second I2C bus and RTC on OpenBlocks A6 ARM: kirkwood: Add support DT of second I2C bus ARM: kirkwood: Convert mplcec4 board to pinctrl ARM: Kirkwood: Convert km_kirkwood to pinctrl ARM: Kirkwood: support 98DX412x kirkwoods with pinctrl ARM: Kirkwood: Convert IX2-200 to pinctrl. ARM: Kirkwood: Convert lsxl boards to pinctrl. ARM: Kirkwood: Convert ib62x0 to pinctrl. ARM: Kirkwood: Convert GoFlex Net to pinctrl. ARM: Kirkwood: Convert dreamplug to pinctrl. ARM: Kirkwood: Convert dockstar to pinctrl. ...
Diffstat (limited to 'arch/arm/mach-kirkwood')
-rw-r--r--arch/arm/mach-kirkwood/Kconfig5
-rw-r--r--arch/arm/mach-kirkwood/board-dnskw.c54
-rw-r--r--arch/arm/mach-kirkwood/board-dockstar.c16
-rw-r--r--arch/arm/mach-kirkwood/board-dreamplug.c15
-rw-r--r--arch/arm/mach-kirkwood/board-goflexnet.c24
-rw-r--r--arch/arm/mach-kirkwood/board-ib62x0.c35
-rw-r--r--arch/arm/mach-kirkwood/board-iconnect.c18
-rw-r--r--arch/arm/mach-kirkwood/board-iomega_ix2_200.c26
-rw-r--r--arch/arm/mach-kirkwood/board-km_kirkwood.c13
-rw-r--r--arch/arm/mach-kirkwood/board-lsxl.c28
-rw-r--r--arch/arm/mach-kirkwood/board-mplcec4.c36
-rw-r--r--arch/arm/mach-kirkwood/board-ns2.c1
-rw-r--r--arch/arm/mach-kirkwood/board-nsa310.c4
-rw-r--r--arch/arm/mach-kirkwood/board-openblocks_a6.c5
-rw-r--r--arch/arm/mach-kirkwood/board-ts219.c26
-rw-r--r--arch/arm/mach-kirkwood/board-usi_topkick.c1
16 files changed, 7 insertions, 300 deletions
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index d018ad4..503d7dd 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -46,6 +46,11 @@ config MACH_GURUPLUG
config ARCH_KIRKWOOD_DT
bool "Marvell Kirkwood Flattened Device Tree"
+ select POWER_SUPPLY
+ select POWER_RESET
+ select POWER_RESET_GPIO
+ select REGULATOR
+ select REGULATOR_FIXED_VOLTAGE
select USE_OF
help
Say 'Y' here if you want your kernel to support the
diff --git a/arch/arm/mach-kirkwood/board-dnskw.c b/arch/arm/mach-kirkwood/board-dnskw.c
index 43d16d6..a1aa87f 100644
--- a/arch/arm/mach-kirkwood/board-dnskw.c
+++ b/arch/arm/mach-kirkwood/board-dnskw.c
@@ -17,51 +17,11 @@
#include <linux/mv643xx_eth.h>
#include <linux/gpio.h>
#include "common.h"
-#include "mpp.h"
static struct mv643xx_eth_platform_data dnskw_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
-static unsigned int dnskw_mpp_config[] __initdata = {
- MPP13_UART1_TXD, /* Custom ... */
- MPP14_UART1_RXD, /* ... Controller (DNS-320 only) */
- MPP20_SATA1_ACTn, /* LED: White Right HDD */
- MPP21_SATA0_ACTn, /* LED: White Left HDD */
- MPP24_GPIO,
- MPP25_GPIO,
- MPP26_GPIO, /* LED: Power */
- MPP27_GPIO, /* LED: Red Right HDD */
- MPP28_GPIO, /* LED: Red Left HDD */
- MPP29_GPIO, /* LED: Red USB (DNS-325 only) */
- MPP30_GPIO,
- MPP31_GPIO,
- MPP32_GPIO,
- MPP33_GPO,
- MPP34_GPIO, /* Button: Front power */
- MPP35_GPIO, /* LED: Red USB (DNS-320 only) */
- MPP36_GPIO, /* Power: Turn off board */
- MPP37_GPIO, /* Power: Turn back on after power failure */
- MPP38_GPIO,
- MPP39_GPIO, /* Power: SATA0 */
- MPP40_GPIO, /* Power: SATA1 */
- MPP41_GPIO, /* SATA0 present */
- MPP42_GPIO, /* SATA1 present */
- MPP43_GPIO, /* LED: White USB */
- MPP44_GPIO, /* Fan: Tachometer Pin */
- MPP45_GPIO, /* Fan: high speed */
- MPP46_GPIO, /* Fan: low speed */
- MPP47_GPIO, /* Button: Back unmount */
- MPP48_GPIO, /* Button: Back reset */
- MPP49_GPIO, /* Temp Alarm (DNS-325) Pin of U5 (DNS-320) */
- 0
-};
-
-static void dnskw_power_off(void)
-{
- gpio_set_value(36, 1);
-}
-
/* Register any GPIO for output and set the value */
static void __init dnskw_gpio_register(unsigned gpio, char *name, int def)
{
@@ -76,22 +36,8 @@ static void __init dnskw_gpio_register(unsigned gpio, char *name, int def)
void __init dnskw_init(void)
{
- kirkwood_mpp_conf(dnskw_mpp_config);
-
- kirkwood_ehci_init();
kirkwood_ge00_init(&dnskw_ge00_data);
- /* Register power-off GPIO. */
- if (gpio_request(36, "dnskw:power:off") == 0
- && gpio_direction_output(36, 0) == 0)
- pm_power_off = dnskw_power_off;
- else
- pr_err("dnskw: failed to configure power-off GPIO\n");
-
- /* Ensure power is supplied to both HDDs */
- dnskw_gpio_register(39, "dnskw:power:sata0", 1);
- dnskw_gpio_register(40, "dnskw:power:sata1", 1);
-
/* Set NAS to turn back on after a power failure */
dnskw_gpio_register(37, "dnskw:power:recover", 1);
}
diff --git a/arch/arm/mach-kirkwood/board-dockstar.c b/arch/arm/mach-kirkwood/board-dockstar.c
index 6912882..d7196db 100644
--- a/arch/arm/mach-kirkwood/board-dockstar.c
+++ b/arch/arm/mach-kirkwood/board-dockstar.c
@@ -17,32 +17,16 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
#include "common.h"
-#include "mpp.h"
static struct mv643xx_eth_platform_data dockstar_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
};
-static unsigned int dockstar_mpp_config[] __initdata = {
- MPP29_GPIO, /* USB Power Enable */
- MPP46_GPIO, /* LED green */
- MPP47_GPIO, /* LED orange */
- 0
-};
-
void __init dockstar_dt_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
- kirkwood_mpp_conf(dockstar_mpp_config);
-
- if (gpio_request(29, "USB Power Enable") != 0 ||
- gpio_direction_output(29, 1) != 0)
- pr_err("can't setup GPIO 29 (USB Power Enable)\n");
- kirkwood_ehci_init();
-
kirkwood_ge00_init(&dockstar_ge00_data);
}
diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c
index 8a8ebe0..08248e2 100644
--- a/arch/arm/mach-kirkwood/board-dreamplug.c
+++ b/arch/arm/mach-kirkwood/board-dreamplug.c
@@ -17,7 +17,6 @@
#include <linux/gpio.h>
#include <linux/platform_data/mmc-mvsdio.h>
#include "common.h"
-#include "mpp.h"
static struct mv643xx_eth_platform_data dreamplug_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
@@ -31,25 +30,11 @@ static struct mvsdio_platform_data dreamplug_mvsdio_data = {
/* unfortunately the CD signal has not been connected */
};
-static unsigned int dreamplug_mpp_config[] __initdata = {
- MPP0_SPI_SCn,
- MPP1_SPI_MOSI,
- MPP2_SPI_SCK,
- MPP3_SPI_MISO,
- MPP47_GPIO, /* Bluetooth LED */
- MPP48_GPIO, /* Wifi LED */
- MPP49_GPIO, /* Wifi AP LED */
- 0
-};
-
void __init dreamplug_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
- kirkwood_mpp_conf(dreamplug_mpp_config);
-
- kirkwood_ehci_init();
kirkwood_ge00_init(&dreamplug_ge00_data);
kirkwood_ge01_init(&dreamplug_ge01_data);
kirkwood_sdio_init(&dreamplug_mvsdio_data);
diff --git a/arch/arm/mach-kirkwood/board-goflexnet.c b/arch/arm/mach-kirkwood/board-goflexnet.c
index 5dcd0d6..9db979a 100644
--- a/arch/arm/mach-kirkwood/board-goflexnet.c
+++ b/arch/arm/mach-kirkwood/board-goflexnet.c
@@ -19,40 +19,16 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
#include "common.h"
-#include "mpp.h"
static struct mv643xx_eth_platform_data goflexnet_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
};
-static unsigned int goflexnet_mpp_config[] __initdata = {
- MPP29_GPIO, /* USB Power Enable */
- MPP47_GPIO, /* LED Orange */
- MPP46_GPIO, /* LED Green */
- MPP45_GPIO, /* LED Left Capacity 3 */
- MPP44_GPIO, /* LED Left Capacity 2 */
- MPP43_GPIO, /* LED Left Capacity 1 */
- MPP42_GPIO, /* LED Left Capacity 0 */
- MPP41_GPIO, /* LED Right Capacity 3 */
- MPP40_GPIO, /* LED Right Capacity 2 */
- MPP39_GPIO, /* LED Right Capacity 1 */
- MPP38_GPIO, /* LED Right Capacity 0 */
- 0
-};
-
void __init goflexnet_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
- kirkwood_mpp_conf(goflexnet_mpp_config);
-
- if (gpio_request(29, "USB Power Enable") != 0 ||
- gpio_direction_output(29, 1) != 0)
- pr_err("can't setup GPIO 29 (USB Power Enable)\n");
- kirkwood_ehci_init();
-
kirkwood_ge00_init(&goflexnet_ge00_data);
}
diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c
index 6d3a564..9f6f496 100644
--- a/arch/arm/mach-kirkwood/board-ib62x0.c
+++ b/arch/arm/mach-kirkwood/board-ib62x0.c
@@ -14,52 +14,17 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
#include <linux/input.h>
#include "common.h"
-#include "mpp.h"
-
-#define IB62X0_GPIO_POWER_OFF 24
static struct mv643xx_eth_platform_data ib62x0_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
-static unsigned int ib62x0_mpp_config[] __initdata = {
- MPP0_NF_IO2,
- MPP1_NF_IO3,
- MPP2_NF_IO4,
- MPP3_NF_IO5,
- MPP4_NF_IO6,
- MPP5_NF_IO7,
- MPP18_NF_IO0,
- MPP19_NF_IO1,
- MPP22_GPIO, /* OS LED red */
- MPP24_GPIO, /* Power off device */
- MPP25_GPIO, /* OS LED green */
- MPP27_GPIO, /* USB transfer LED */
- MPP28_GPIO, /* Reset button */
- MPP29_GPIO, /* USB Copy button */
- 0
-};
-
-static void ib62x0_power_off(void)
-{
- gpio_set_value(IB62X0_GPIO_POWER_OFF, 1);
-}
-
void __init ib62x0_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
- kirkwood_mpp_conf(ib62x0_mpp_config);
-
- kirkwood_ehci_init();
kirkwood_ge00_init(&ib62x0_ge00_data);
- if (gpio_request(IB62X0_GPIO_POWER_OFF, "ib62x0:power:off") == 0 &&
- gpio_direction_output(IB62X0_GPIO_POWER_OFF, 0) == 0)
- pm_power_off = ib62x0_power_off;
- else
- pr_err("board-ib62x0: failed to configure power-off GPIO\n");
}
diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c
index 24f5aa7..c8ebde4 100644
--- a/arch/arm/mach-kirkwood/board-iconnect.c
+++ b/arch/arm/mach-kirkwood/board-iconnect.c
@@ -13,31 +13,13 @@
#include <linux/of.h>
#include <linux/mv643xx_eth.h>
#include "common.h"
-#include "mpp.h"
static struct mv643xx_eth_platform_data iconnect_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(11),
};
-static unsigned int iconnect_mpp_config[] __initdata = {
- MPP12_GPIO,
- MPP35_GPIO,
- MPP41_GPIO,
- MPP42_GPIO,
- MPP43_GPIO,
- MPP44_GPIO,
- MPP45_GPIO,
- MPP46_GPIO,
- MPP47_GPIO,
- MPP48_GPIO,
- 0
-};
-
void __init iconnect_init(void)
{
- kirkwood_mpp_conf(iconnect_mpp_config);
-
- kirkwood_ehci_init();
kirkwood_ge00_init(&iconnect_ge00_data);
}
diff --git a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c
index e4ed62c..f655b26 100644
--- a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c
+++ b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c
@@ -13,7 +13,6 @@
#include <linux/mv643xx_eth.h>
#include <linux/ethtool.h>
#include "common.h"
-#include "mpp.h"
static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_NONE,
@@ -21,35 +20,10 @@ static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = {
.duplex = DUPLEX_FULL,
};
-static unsigned int iomega_ix2_200_mpp_config[] __initdata = {
- MPP12_GPIO, /* Reset Button */
- MPP14_GPIO, /* Power Button */
- MPP15_GPIO, /* Backup LED (blue) */
- MPP16_GPIO, /* Power LED (white) */
- MPP35_GPIO, /* OTB Button */
- MPP36_GPIO, /* Rebuild LED (white) */
- MPP37_GPIO, /* Health LED (red) */
- MPP38_GPIO, /* SATA LED brightness control 1 */
- MPP39_GPIO, /* SATA LED brightness control 2 */
- MPP40_GPIO, /* Backup LED brightness control 1 */
- MPP41_GPIO, /* Backup LED brightness control 2 */
- MPP42_GPIO, /* Power LED brightness control 1 */
- MPP43_GPIO, /* Power LED brightness control 2 */
- MPP44_GPIO, /* Health LED brightness control 1 */
- MPP45_GPIO, /* Health LED brightness control 2 */
- MPP46_GPIO, /* Rebuild LED brightness control 1 */
- MPP47_GPIO, /* Rebuild LED brightness control 2 */
- 0
-};
-
void __init iomega_ix2_200_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
- kirkwood_mpp_conf(iomega_ix2_200_mpp_config);
-
- kirkwood_ehci_init();
-
kirkwood_ge01_init(&iomega_ix2_200_ge00_data);
}
diff --git a/arch/arm/mach-kirkwood/board-km_kirkwood.c b/arch/arm/mach-kirkwood/board-km_kirkwood.c
index f7d3283..44e4605 100644
--- a/arch/arm/mach-kirkwood/board-km_kirkwood.c
+++ b/arch/arm/mach-kirkwood/board-km_kirkwood.c
@@ -18,27 +18,15 @@
#include <linux/clk.h>
#include <linux/clk-private.h>
#include "common.h"
-#include "mpp.h"
static struct mv643xx_eth_platform_data km_kirkwood_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
};
-static unsigned int km_kirkwood_mpp_config[] __initdata = {
- MPP8_GPIO, /* I2C SDA */
- MPP9_GPIO, /* I2C SCL */
- 0
-};
-
void __init km_kirkwood_init(void)
{
struct clk *sata_clk;
/*
- * Basic setup. Needs to be called early.
- */
- kirkwood_mpp_conf(km_kirkwood_mpp_config);
-
- /*
* Our variant of kirkwood (integrated in the Bobcat) hangs on accessing
* SATA bits (14-15) of the Clock Gating Control Register. Since these
* devices are also not present in this variant, their clocks get
@@ -52,6 +40,5 @@ void __init km_kirkwood_init(void)
if (!IS_ERR(sata_clk))
sata_clk->flags |= CLK_IGNORE_UNUSED;
- kirkwood_ehci_init();
kirkwood_ge00_init(&km_kirkwood_ge00_data);
}
diff --git a/arch/arm/mach-kirkwood/board-lsxl.c b/arch/arm/mach-kirkwood/board-lsxl.c
index 7e18cad..4ec8b7a 100644
--- a/arch/arm/mach-kirkwood/board-lsxl.c
+++ b/arch/arm/mach-kirkwood/board-lsxl.c
@@ -15,9 +15,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
#include "common.h"
-#include "mpp.h"
static struct mv643xx_eth_platform_data lsxl_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
@@ -27,23 +25,6 @@ static struct mv643xx_eth_platform_data lsxl_ge01_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
-static unsigned int lsxl_mpp_config[] __initdata = {
- MPP10_GPO, /* HDD Power Enable */
- MPP11_GPIO, /* USB Vbus Enable */
- MPP18_GPO, /* FAN High Enable# */
- MPP19_GPO, /* FAN Low Enable# */
- MPP36_GPIO, /* Function Blue LED */
- MPP37_GPIO, /* Alarm LED */
- MPP38_GPIO, /* Info LED */
- MPP39_GPIO, /* Power LED */
- MPP40_GPIO, /* Fan Lock */
- MPP41_GPIO, /* Function Button */
- MPP42_GPIO, /* Power Switch */
- MPP43_GPIO, /* Power Auto Switch */
- MPP48_GPIO, /* Function Red LED */
- 0
-};
-
/*
* On the LS-XHL/LS-CHLv2, the shutdown process is following:
* - Userland monitors key events until the power switch goes to off position
@@ -57,21 +38,12 @@ static void lsxl_power_off(void)
kirkwood_restart('h', NULL);
}
-#define LSXL_GPIO_HDD_POWER 10
-#define LSXL_GPIO_USB_POWER 11
-
void __init lsxl_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
- kirkwood_mpp_conf(lsxl_mpp_config);
-
- /* usb and sata power on */
- gpio_set_value(LSXL_GPIO_USB_POWER, 1);
- gpio_set_value(LSXL_GPIO_HDD_POWER, 1);
- kirkwood_ehci_init();
kirkwood_ge00_init(&lsxl_ge00_data);
kirkwood_ge01_init(&lsxl_ge01_data);
diff --git a/arch/arm/mach-kirkwood/board-mplcec4.c b/arch/arm/mach-kirkwood/board-mplcec4.c
index e78a227..56bfe5a 100644
--- a/arch/arm/mach-kirkwood/board-mplcec4.c
+++ b/arch/arm/mach-kirkwood/board-mplcec4.c
@@ -24,52 +24,16 @@ static struct mv643xx_eth_platform_data mplcec4_ge01_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(2),
};
-static unsigned int mplcec4_mpp_config[] __initdata = {
- MPP0_NF_IO2,
- MPP1_NF_IO3,
- MPP2_NF_IO4,
- MPP3_NF_IO5,
- MPP4_NF_IO6,
- MPP5_NF_IO7,
- MPP6_SYSRST_OUTn,
- MPP7_GPO, /* Status LED Green High Active */
- MPP10_UART0_TXD,
- MPP11_UART0_RXD,
- MPP12_SD_CLK,
- MPP13_SD_CMD, /* Alt UART1_TXD */
- MPP14_SD_D0, /* Alt UART1_RXD */
- MPP15_SD_D1,
- MPP16_SD_D2,
- MPP17_SD_D3,
- MPP18_NF_IO0,
- MPP19_NF_IO1,
- MPP28_GPIO, /* Input SYS_POR_DET (active High) */
- MPP29_GPIO, /* Input SYS_RTC_INT (active High) */
- MPP34_SATA1_ACTn,
- MPP35_SATA0_ACTn,
- MPP40_GPIO, /* LED User1 orange */
- MPP41_GPIO, /* LED User1 green */
- MPP44_GPIO, /* LED User0 orange */
- MPP45_GPIO, /* LED User0 green */
- MPP46_GPIO, /* Status LED Yellow High Active */
- MPP47_GPIO, /* SD_CD# (in/IRQ)*/
- 0
-};
-
-
static struct mvsdio_platform_data mplcec4_mvsdio_data = {
.gpio_card_detect = 47, /* MPP47 used as SD card detect */
};
-
void __init mplcec4_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
- kirkwood_mpp_conf(mplcec4_mpp_config);
- kirkwood_ehci_init();
kirkwood_ge00_init(&mplcec4_ge00_data);
kirkwood_ge01_init(&mplcec4_ge01_data);
kirkwood_sdio_init(&mplcec4_mvsdio_data);
diff --git a/arch/arm/mach-kirkwood/board-ns2.c b/arch/arm/mach-kirkwood/board-ns2.c
index 78596c4..8821720 100644
--- a/arch/arm/mach-kirkwood/board-ns2.c
+++ b/arch/arm/mach-kirkwood/board-ns2.c
@@ -73,7 +73,6 @@ void __init ns2_init(void)
*/
kirkwood_mpp_conf(ns2_mpp_config);
- kirkwood_ehci_init();
if (of_machine_is_compatible("lacie,netspace_lite_v2") ||
of_machine_is_compatible("lacie,netspace_mini_v2"))
ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
diff --git a/arch/arm/mach-kirkwood/board-nsa310.c b/arch/arm/mach-kirkwood/board-nsa310.c
index 027ce83..f58d2e1 100644
--- a/arch/arm/mach-kirkwood/board-nsa310.c
+++ b/arch/arm/mach-kirkwood/board-nsa310.c
@@ -85,10 +85,6 @@ void __init nsa310_init(void)
nsa310_gpio_init();
- /* this can be removed once the mainline kirkwood.dtsi gets
- * the ehci configuration by default */
- kirkwood_ehci_init();
-
kirkwood_pcie_id(&dev, &rev);
i2c_register_board_info(0, ARRAY_AND_SIZE(nsa310_i2c_info));
diff --git a/arch/arm/mach-kirkwood/board-openblocks_a6.c b/arch/arm/mach-kirkwood/board-openblocks_a6.c
index e807e8c..815fc64 100644
--- a/arch/arm/mach-kirkwood/board-openblocks_a6.c
+++ b/arch/arm/mach-kirkwood/board-openblocks_a6.c
@@ -55,8 +55,8 @@ static unsigned int openblocks_a6_mpp_config[] __initdata = {
MPP38_GPIO, /* INIT */
MPP39_GPIO, /* USB OC */
MPP41_GPIO, /* LED: Red */
- MPP42_GPIO, /* LED: Yellow */
- MPP43_GPIO, /* LED: Green */
+ MPP42_GPIO, /* LED: Green */
+ MPP43_GPIO, /* LED: Yellow */
0,
};
@@ -66,6 +66,5 @@ void __init openblocks_a6_init(void)
* Basic setup. Needs to be called early.
*/
kirkwood_mpp_conf(openblocks_a6_mpp_config);
- kirkwood_ehci_init();
kirkwood_ge00_init(&openblocks_ge00_data);
}
diff --git a/arch/arm/mach-kirkwood/board-ts219.c b/arch/arm/mach-kirkwood/board-ts219.c
index f3bfeda..acb0187 100644
--- a/arch/arm/mach-kirkwood/board-ts219.c
+++ b/arch/arm/mach-kirkwood/board-ts219.c
@@ -23,47 +23,21 @@
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
#include "common.h"
-#include "mpp.h"
#include "tsx1x-common.h"
static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
-static unsigned int qnap_ts219_mpp_config[] __initdata = {
- MPP0_SPI_SCn,
- MPP1_SPI_MOSI,
- MPP2_SPI_SCK,
- MPP3_SPI_MISO,
- MPP4_SATA1_ACTn,
- MPP5_SATA0_ACTn,
- MPP8_TW0_SDA,
- MPP9_TW0_SCK,
- MPP10_UART0_TXD,
- MPP11_UART0_RXD,
- MPP13_UART1_TXD, /* PIC controller */
- MPP14_UART1_RXD, /* PIC controller */
- MPP15_GPIO, /* USB Copy button (on devices with 88F6281) */
- MPP16_GPIO, /* Reset button (on devices with 88F6281) */
- MPP36_GPIO, /* RAM: 0: 256 MB, 1: 512 MB */
- MPP37_GPIO, /* Reset button (on devices with 88F6282) */
- MPP43_GPIO, /* USB Copy button (on devices with 88F6282) */
- MPP44_GPIO, /* Board ID: 0: TS-11x, 1: TS-21x */
- 0
-};
-
void __init qnap_dt_ts219_init(void)
{
u32 dev, rev;
- kirkwood_mpp_conf(qnap_ts219_mpp_config);
-
kirkwood_pcie_id(&dev, &rev);
if (dev == MV88F6282_DEV_ID)
qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
kirkwood_ge00_init(&qnap_ts219_ge00_data);
- kirkwood_ehci_init();
pm_power_off = qnap_tsx1x_power_off;
}
diff --git a/arch/arm/mach-kirkwood/board-usi_topkick.c b/arch/arm/mach-kirkwood/board-usi_topkick.c
index e2ec9d8..15e69fc 100644
--- a/arch/arm/mach-kirkwood/board-usi_topkick.c
+++ b/arch/arm/mach-kirkwood/board-usi_topkick.c
@@ -76,7 +76,6 @@ void __init usi_topkick_init(void)
/* SATA0 power enable */
gpio_set_value(TOPKICK_SATA0_PWR_ENABLE, 1);
- kirkwood_ehci_init();
kirkwood_ge00_init(&topkick_ge00_data);
kirkwood_sdio_init(&topkick_mvsdio_data);
}
OpenPOWER on IntegriCloud