Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc board specific changes from Olof Johansson:
 "While we generally attempt to get rid of board specific files and
  replace them with device tree based descriptions, a lot of platforms
  have not come that far:

  In shmobile, we add two new board files because their recently started
  effort to add DT support has not proceeded enough to use it for all of
  the important hardware.

  In Kirkwood, we are adding support for new boards with a combination
  of DT and board file contents in multiple cases.

  pxa/mmp and imx are extending support for existing board files but not
  adding new ones."

Fix up trivial conflicts in arch/arm/mach-{mmp/ttc_dkb.c,shmobile/{Kconfig,Makefile}}

* tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (94 commits)
  ARM: shmobile: fix smp build
  ARM: kirkwood: Add support for RaidSonic IB-NAS6210/6220 using devicetree
  kirkwood: Add iconnect support
  orion/kirkwood: create a generic function for gpio led blinking
  kirkwood/orion: fix orion_gpio_set_blink
  ARM: kirkwood: Define DNS-320/DNS-325 NAND in fdt
  kirkwood: Allow nand to be configured via. devicetree
  mtd: Add orion_nand devicetree bindings
  ARM: kirkwood: Basic support for DNS-320 and DNS-325
  ARM: mach-shmobile: Use DT_MACHINE for armadillo 800 eva
  ARM: mach-shmobile: Use DT_MACHINE for KZM9G
  ARM: pxa: hx4700: Add Synaptics NavPoint touchpad
  ARM: pxa: Use REGULATOR_SUPPLY macro
  ARM: mach-shmobile: kzm9g: enable SMP boot
  ARM: mach-shmobile: kzm9g: defconfig update
  ARM: mach-shmobile: kzm9g: add PCF8757 gpio-key
  ARM: mach-shmobile: kzm9g: add SDHI support
  ARM: mach-shmobile: kzm9g: add MMCIF support
  ARM: mach-shmobile: kzm9g: correct screen direction
  ARM: mach-shmobile: sh73a0.h: add GPIO_NR
  ...

9 files changed, 655 insertions, 0 deletions

diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 90ceab7..199764f 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -58,6 +58,28 @@ config MACH_DREAMPLUG_DT
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell DreamPlug (Flattened Device Tree).
 
+config MACH_ICONNECT_DT
+	bool "Iomega Iconnect (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	help
+	  Say 'Y' here to enable Iomega Iconnect support.
+
+config MACH_DLINK_KIRKWOOD_DT
+	bool "D-Link Kirkwood-based NAS (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Kirkwood-based D-Link NASes such as DNS-320 & DNS-325,
+	  using Flattened Device Tree.
+
+config MACH_IB62X0_DT
+	bool "RaidSonic IB-NAS6210, IB-NAS6220 (Flattened Device Tree)"
+	select ARCH_KIRKWOOD_DT
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  RaidSonic IB-NAS6210 & IB-NAS6220 devices, using
+	  Flattened Device Tree.
+
 config MACH_TS219
 	bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS"
 	help
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index e299a95..d2b0590 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -22,3 +22,6 @@ obj-$(CONFIG_MACH_T5325)		+= t5325-setup.o
 obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
 obj-$(CONFIG_ARCH_KIRKWOOD_DT)		+= board-dt.o
 obj-$(CONFIG_MACH_DREAMPLUG_DT)		+= board-dreamplug.o
+obj-$(CONFIG_MACH_ICONNECT_DT)		+= board-iconnect.o
+obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT)	+= board-dnskw.o
+obj-$(CONFIG_MACH_IB62X0_DT)		+= board-ib62x0.o
diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot
index 16f9385..02edbdf 100644
--- a/arch/arm/mach-kirkwood/Makefile.boot
+++ b/arch/arm/mach-kirkwood/Makefile.boot
@@ -3,3 +3,7 @@ params_phys-y	:= 0x00000100
 initrd_phys-y	:= 0x00800000
 
 dtb-$(CONFIG_MACH_DREAMPLUG_DT) += kirkwood-dreamplug.dtb
+dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns320.dtb
+dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns325.dtb
+dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb
+dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb
diff --git a/arch/arm/mach-kirkwood/board-dnskw.c b/arch/arm/mach-kirkwood/board-dnskw.c
new file mode 100644
index 0000000..58c2d68
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-dnskw.c
@@ -0,0 +1,275 @@
+/*
+ * Copyright 2012 (C), Jamie Lentin <jm@lentin.co.uk>
+ *
+ * arch/arm/mach-kirkwood/board-dnskw.c
+ *
+ * D-link DNS-320 & DNS-325 NAS Init for drivers not converted to
+ * flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/of.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/gpio-fan.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/kirkwood.h>
+#include <mach/bridge-regs.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data dnskw_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv_sata_platform_data dnskw_sata_data = {
+	.n_ports	= 2,
+};
+
+static unsigned int dnskw_mpp_config[] __initdata = {
+	MPP13_UART1_TXD,	/* Custom ... */
+	MPP14_UART1_RXD,	/* ... Controller (DNS-320 only) */
+	MPP20_SATA1_ACTn,	/* LED: White Right HDD */
+	MPP21_SATA0_ACTn,	/* LED: White Left HDD */
+	MPP24_GPIO,
+	MPP25_GPIO,
+	MPP26_GPIO,	/* LED: Power */
+	MPP27_GPIO,	/* LED: Red Right HDD */
+	MPP28_GPIO,	/* LED: Red Left HDD */
+	MPP29_GPIO,	/* LED: Red USB (DNS-325 only) */
+	MPP30_GPIO,
+	MPP31_GPIO,
+	MPP32_GPIO,
+	MPP33_GPO,
+	MPP34_GPIO,	/* Button: Front power */
+	MPP35_GPIO,	/* LED: Red USB (DNS-320 only) */
+	MPP36_GPIO,	/* Power: Turn off board */
+	MPP37_GPIO,	/* Power: Turn back on after power failure */
+	MPP38_GPIO,
+	MPP39_GPIO,	/* Power: SATA0 */
+	MPP40_GPIO,	/* Power: SATA1 */
+	MPP41_GPIO,	/* SATA0 present */
+	MPP42_GPIO,	/* SATA1 present */
+	MPP43_GPIO,	/* LED: White USB */
+	MPP44_GPIO,	/* Fan: Tachometer Pin */
+	MPP45_GPIO,	/* Fan: high speed */
+	MPP46_GPIO,	/* Fan: low speed */
+	MPP47_GPIO,	/* Button: Back unmount */
+	MPP48_GPIO,	/* Button: Back reset */
+	MPP49_GPIO,	/* Temp Alarm (DNS-325) Pin of U5 (DNS-320) */
+	0
+};
+
+static struct gpio_led dns325_led_pins[] = {
+	{
+		.name	= "dns325:white:power",
+		.gpio	= 26,
+		.active_low = 1,
+		.default_trigger = "default-on",
+	},
+	{
+		.name	= "dns325:white:usb",
+		.gpio	= 43,
+		.active_low = 1,
+	},
+	{
+		.name	= "dns325:red:l_hdd",
+		.gpio	= 28,
+		.active_low = 1,
+	},
+	{
+		.name	= "dns325:red:r_hdd",
+		.gpio	= 27,
+		.active_low = 1,
+	},
+	{
+		.name	= "dns325:red:usb",
+		.gpio	= 29,
+		.active_low = 1,
+	},
+};
+
+static struct gpio_led_platform_data dns325_led_data = {
+	.num_leds	= ARRAY_SIZE(dns325_led_pins),
+	.leds		= dns325_led_pins,
+};
+
+static struct platform_device dns325_led_device = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &dns325_led_data,
+	},
+};
+
+static struct gpio_led dns320_led_pins[] = {
+	{
+		.name	= "dns320:blue:power",
+		.gpio	= 26,
+		.active_low = 1,
+		.default_trigger = "default-on",
+	},
+	{
+		.name	= "dns320:blue:usb",
+		.gpio	= 43,
+		.active_low = 1,
+	},
+	{
+		.name	= "dns320:orange:l_hdd",
+		.gpio	= 28,
+		.active_low = 1,
+	},
+	{
+		.name	= "dns320:orange:r_hdd",
+		.gpio	= 27,
+		.active_low = 1,
+	},
+	{
+		.name	= "dns320:orange:usb",
+		.gpio	= 35,
+		.active_low = 1,
+	},
+};
+
+static struct gpio_led_platform_data dns320_led_data = {
+	.num_leds	= ARRAY_SIZE(dns320_led_pins),
+	.leds		= dns320_led_pins,
+};
+
+static struct platform_device dns320_led_device = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &dns320_led_data,
+	},
+};
+
+static struct i2c_board_info dns325_i2c_board_info[] __initdata = {
+	{
+		I2C_BOARD_INFO("lm75", 0x48),
+	},
+	/* Something at 0x0c also */
+};
+
+static struct gpio_keys_button dnskw_button_pins[] = {
+	{
+		.code		= KEY_POWER,
+		.gpio		= 34,
+		.desc		= "Power button",
+		.active_low	= 1,
+	},
+	{
+		.code		= KEY_EJECTCD,
+		.gpio		= 47,
+		.desc		= "USB unmount button",
+		.active_low	= 1,
+	},
+	{
+		.code		= KEY_RESTART,
+		.gpio		= 48,
+		.desc		= "Reset button",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data dnskw_button_data = {
+	.buttons	= dnskw_button_pins,
+	.nbuttons	= ARRAY_SIZE(dnskw_button_pins),
+};
+
+static struct platform_device dnskw_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &dnskw_button_data,
+	}
+};
+
+/* Fan: ADDA AD045HB-G73 40mm 6000rpm@5v */
+static struct gpio_fan_speed dnskw_fan_speed[] = {
+	{    0,  0 },
+	{ 3000,	 1 },
+	{ 6000,	 2 },
+};
+static unsigned dnskw_fan_pins[] = {46, 45};
+
+static struct gpio_fan_platform_data dnskw_fan_data = {
+	.num_ctrl	= ARRAY_SIZE(dnskw_fan_pins),
+	.ctrl		= dnskw_fan_pins,
+	.num_speed	= ARRAY_SIZE(dnskw_fan_speed),
+	.speed		= dnskw_fan_speed,
+};
+
+static struct platform_device dnskw_fan_device = {
+	.name	= "gpio-fan",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &dnskw_fan_data,
+	},
+};
+
+static void dnskw_power_off(void)
+{
+	gpio_set_value(36, 1);
+}
+
+/* Register any GPIO for output and set the value */
+static void __init dnskw_gpio_register(unsigned gpio, char *name, int def)
+{
+	if (gpio_request(gpio, name) == 0 &&
+	    gpio_direction_output(gpio, 0) == 0) {
+		gpio_set_value(gpio, def);
+		if (gpio_export(gpio, 0) != 0)
+			pr_err("dnskw: Failed to export GPIO %s\n", name);
+	} else
+		pr_err("dnskw: Failed to register %s\n", name);
+}
+
+void __init dnskw_init(void)
+{
+	kirkwood_mpp_conf(dnskw_mpp_config);
+
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&dnskw_ge00_data);
+	kirkwood_sata_init(&dnskw_sata_data);
+	kirkwood_i2c_init();
+
+	platform_device_register(&dnskw_button_device);
+	platform_device_register(&dnskw_fan_device);
+
+	if (of_machine_is_compatible("dlink,dns-325")) {
+		i2c_register_board_info(0, dns325_i2c_board_info,
+					ARRAY_SIZE(dns325_i2c_board_info));
+		platform_device_register(&dns325_led_device);
+
+	} else if (of_machine_is_compatible("dlink,dns-320"))
+		platform_device_register(&dns320_led_device);
+
+	/* Register power-off GPIO. */
+	if (gpio_request(36, "dnskw:power:off") == 0
+	    && gpio_direction_output(36, 0) == 0)
+		pm_power_off = dnskw_power_off;
+	else
+		pr_err("dnskw: failed to configure power-off GPIO\n");
+
+	/* Ensure power is supplied to both HDDs */
+	dnskw_gpio_register(39, "dnskw:power:sata0", 1);
+	dnskw_gpio_register(40, "dnskw:power:sata1", 1);
+
+	/* Set NAS to turn back on after a power failure */
+	dnskw_gpio_register(37, "dnskw:power:recover", 1);
+}
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index f7fe1b9..10d1969 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -56,11 +56,24 @@ static void __init kirkwood_dt_init(void)
 	if (of_machine_is_compatible("globalscale,dreamplug"))
 		dreamplug_init();
 
+	if (of_machine_is_compatible("dlink,dns-kirkwood"))
+		dnskw_init();
+
+	if (of_machine_is_compatible("iom,iconnect"))
+		iconnect_init();
+
+	if (of_machine_is_compatible("raidsonic,ib-nas62x0"))
+		ib62x0_init();
+
 	of_platform_populate(NULL, kirkwood_dt_match_table, NULL, NULL);
 }
 
 static const char *kirkwood_dt_board_compat[] = {
 	"globalscale,dreamplug",
+	"dlink,dns-320",
+	"dlink,dns-325",
+	"iom,iconnect",
+	"raidsonic,ib-nas62x0",
 	NULL
 };
 
diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c
new file mode 100644
index 0000000..eddf1df
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-ib62x0.c
@@ -0,0 +1,143 @@
+/*
+ * Copyright 2012 (C), Simon Baatz <gmbnomis@gmail.com>
+ *
+ * arch/arm/mach-kirkwood/board-ib62x0.c
+ *
+ * RaidSonic ICY BOX IB-NAS6210 & IB-NAS6220 init for drivers not
+ * converted to flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+#define IB62X0_GPIO_POWER_OFF	24
+
+static struct mv643xx_eth_platform_data ib62x0_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv_sata_platform_data ib62x0_sata_data = {
+	.n_ports	= 2,
+};
+
+static unsigned int ib62x0_mpp_config[] __initdata = {
+	MPP0_NF_IO2,
+	MPP1_NF_IO3,
+	MPP2_NF_IO4,
+	MPP3_NF_IO5,
+	MPP4_NF_IO6,
+	MPP5_NF_IO7,
+	MPP18_NF_IO0,
+	MPP19_NF_IO1,
+	MPP22_GPIO,	/* OS LED red */
+	MPP24_GPIO,	/* Power off device */
+	MPP25_GPIO,	/* OS LED green */
+	MPP27_GPIO,	/* USB transfer LED */
+	MPP28_GPIO,	/* Reset button */
+	MPP29_GPIO,	/* USB Copy button */
+	0
+};
+
+static struct gpio_led ib62x0_led_pins[] = {
+	{
+		.name			= "ib62x0:green:os",
+		.default_trigger	= "default-on",
+		.gpio			= 25,
+		.active_low		= 0,
+	},
+	{
+		.name			= "ib62x0:red:os",
+		.default_trigger	= "none",
+		.gpio			= 22,
+		.active_low		= 0,
+	},
+	{
+		.name			= "ib62x0:red:usb_copy",
+		.default_trigger	= "none",
+		.gpio			= 27,
+		.active_low		= 0,
+	},
+};
+
+static struct gpio_led_platform_data ib62x0_led_data = {
+	.leds		= ib62x0_led_pins,
+	.num_leds	= ARRAY_SIZE(ib62x0_led_pins),
+};
+
+static struct platform_device ib62x0_led_device = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &ib62x0_led_data,
+	}
+};
+
+static struct gpio_keys_button ib62x0_button_pins[] = {
+	{
+		.code		= KEY_COPY,
+		.gpio		= 29,
+		.desc		= "USB Copy",
+		.active_low	= 1,
+	},
+	{
+		.code		= KEY_RESTART,
+		.gpio		= 28,
+		.desc		= "Reset",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data ib62x0_button_data = {
+	.buttons	= ib62x0_button_pins,
+	.nbuttons	= ARRAY_SIZE(ib62x0_button_pins),
+};
+
+static struct platform_device ib62x0_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &ib62x0_button_data,
+	}
+};
+
+static void ib62x0_power_off(void)
+{
+	gpio_set_value(IB62X0_GPIO_POWER_OFF, 1);
+}
+
+void __init ib62x0_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_mpp_conf(ib62x0_mpp_config);
+
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&ib62x0_ge00_data);
+	kirkwood_sata_init(&ib62x0_sata_data);
+	platform_device_register(&ib62x0_led_device);
+	platform_device_register(&ib62x0_button_device);
+	if (gpio_request(IB62X0_GPIO_POWER_OFF, "ib62x0:power:off") == 0 &&
+	    gpio_direction_output(IB62X0_GPIO_POWER_OFF, 0) == 0)
+		pm_power_off = ib62x0_power_off;
+	else
+		pr_err("board-ib62x0: failed to configure power-off GPIO\n");
+}
diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c
new file mode 100644
index 0000000..2222c57
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-iconnect.c
@@ -0,0 +1,165 @@
+/*
+ * arch/arm/mach-kirkwood/board-iconnect.c
+ *
+ * Iomega i-connect Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data iconnect_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(11),
+};
+
+static struct gpio_led iconnect_led_pins[] = {
+	{
+		.name		= "led_level",
+		.gpio		= 41,
+		.default_trigger = "default-on",
+	}, {
+		.name		= "power:blue",
+		.gpio		= 42,
+		.default_trigger = "timer",
+	}, {
+		.name		= "power:red",
+		.gpio		= 43,
+	}, {
+		.name		= "usb1:blue",
+		.gpio		= 44,
+	}, {
+		.name		= "usb2:blue",
+		.gpio		= 45,
+	}, {
+		.name		= "usb3:blue",
+		.gpio		= 46,
+	}, {
+		.name		= "usb4:blue",
+		.gpio		= 47,
+	}, {
+		.name		= "otb:blue",
+		.gpio		= 48,
+	},
+};
+
+static struct gpio_led_platform_data iconnect_led_data = {
+	.leds		= iconnect_led_pins,
+	.num_leds	= ARRAY_SIZE(iconnect_led_pins),
+	.gpio_blink_set	= orion_gpio_led_blink_set,
+};
+
+static struct platform_device iconnect_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &iconnect_led_data,
+	}
+};
+
+static unsigned int iconnect_mpp_config[] __initdata = {
+	MPP12_GPIO,
+	MPP35_GPIO,
+	MPP41_GPIO,
+	MPP42_GPIO,
+	MPP43_GPIO,
+	MPP44_GPIO,
+	MPP45_GPIO,
+	MPP46_GPIO,
+	MPP47_GPIO,
+	MPP48_GPIO,
+	0
+};
+
+static struct i2c_board_info __initdata iconnect_board_info[] = {
+	{
+		I2C_BOARD_INFO("lm63", 0x4c),
+	},
+};
+
+static struct mtd_partition iconnect_nand_parts[] = {
+	{
+		.name = "flash",
+		.offset = 0,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+/* yikes... theses are the original input buttons */
+/* but I'm not convinced by the sw event choices  */
+static struct gpio_keys_button iconnect_buttons[] = {
+	{
+		.type		= EV_SW,
+		.code		= SW_LID,
+		.gpio		= 12,
+		.desc		= "Reset Button",
+		.active_low	= 1,
+		.debounce_interval = 100,
+	}, {
+		.type		= EV_SW,
+		.code		= SW_TABLET_MODE,
+		.gpio		= 35,
+		.desc		= "OTB Button",
+		.active_low	= 1,
+		.debounce_interval = 100,
+	},
+};
+
+static struct gpio_keys_platform_data iconnect_button_data = {
+	.buttons	= iconnect_buttons,
+	.nbuttons	= ARRAY_SIZE(iconnect_buttons),
+};
+
+static struct platform_device iconnect_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev        = {
+		.platform_data  = &iconnect_button_data,
+	},
+};
+
+void __init iconnect_init(void)
+{
+	kirkwood_mpp_conf(iconnect_mpp_config);
+	kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 25);
+	kirkwood_i2c_init();
+	i2c_register_board_info(0, iconnect_board_info,
+		ARRAY_SIZE(iconnect_board_info));
+
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&iconnect_ge00_data);
+
+	platform_device_register(&iconnect_button_device);
+	platform_device_register(&iconnect_leds);
+}
+
+static int __init iconnect_pci_init(void)
+{
+	if (of_machine_is_compatible("iom,iconnect"))
+		kirkwood_pcie_init(KW_PCIE0);
+	return 0;
+}
+subsys_initcall(iconnect_pci_init);
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index a02cae8..3ad0373 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -15,6 +15,7 @@
 #include <linux/ata_platform.h>
 #include <linux/mtd/nand.h>
 #include <linux/dma-mapping.h>
+#include <linux/of.h>
 #include <net/dsa.h>
 #include <asm/page.h>
 #include <asm/timex.h>
@@ -482,6 +483,9 @@ static int __init kirkwood_clock_gate(void)
 	unsigned int curr = readl(CLOCK_GATING_CTRL);
 	u32 dev, rev;
 
+#ifdef CONFIG_OF
+	struct device_node *np;
+#endif
 	kirkwood_pcie_id(&dev, &rev);
 	printk(KERN_DEBUG "Gating clock of unused units\n");
 	printk(KERN_DEBUG "before: 0x%08x\n", curr);
@@ -489,6 +493,14 @@ static int __init kirkwood_clock_gate(void)
 	/* Make sure those units are accessible */
 	writel(curr | CGC_SATA0 | CGC_SATA1 | CGC_PEX0 | CGC_PEX1, CLOCK_GATING_CTRL);
 
+#ifdef CONFIG_OF
+	np = of_find_compatible_node(NULL, NULL, "mrvl,orion-nand");
+	if (np && of_device_is_available(np)) {
+		kirkwood_clk_ctrl |= CGC_RUNIT;
+		of_node_put(np);
+	}
+#endif
+
 	/* For SATA: first shutdown the phy */
 	if (!(kirkwood_clk_ctrl & CGC_SATA0)) {
 		/* Disable PLL and IVREF */
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index fa8e768..a34c41a 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -58,6 +58,24 @@ void dreamplug_init(void);
 static inline void dreamplug_init(void) {};
 #endif
 
+#ifdef CONFIG_MACH_DLINK_KIRKWOOD_DT
+void dnskw_init(void);
+#else
+static inline void dnskw_init(void) {};
+#endif
+
+#ifdef CONFIG_MACH_ICONNECT_DT
+void iconnect_init(void);
+#else
+static inline void iconnect_init(void) {};
+#endif
+
+#ifdef CONFIG_MACH_IB62X0_DT
+void ib62x0_init(void);
+#else
+static inline void ib62x0_init(void) {};
+#endif
+
 /* early init functions not converted to fdt yet */
 char *kirkwood_id(void);
 void kirkwood_l2_init(void);