ARM: remove ixp23xx and ixp2000 platforms

ixp2xxx platforms have had no real changes since ~2006 and the maintainer
has said on irc that they can be removed:

13:05 < nico> do you still care about ixp2000?
13:22 < lennert> not really, no
13:58 < nico> do you think we could remove it from the kernel tree?
14:01 < lennert> go for it, and remove ixp23xx too while you're at it

Removing will help simplify ARM consolidation in general and PCI re-work
specifically.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>

1 files changed, 0 insertions, 265 deletions

diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c
deleted file mode 100644
index 4867f40..0000000
--- a/arch/arm/mach-ixp2000/enp2611.c
+++ /dev/null
@@ -1,265 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/enp2611.c
- *
- * Radisys ENP-2611 support.
- *
- * Created 2004 by Lennert Buytenhek from the ixdp2x01 code.  The
- * original version carries the following notices:
- *
- * Original Author: Andrzej Mialkowski <andrzej.mialkowski@intel.com>
- * Maintainer: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright (C) 2002-2003 Intel Corp.
- * Copyright (C) 2003-2004 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/bitops.h>
-#include <linux/pci.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_core.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/pci.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-
-/*************************************************************************
- * ENP-2611 timer tick configuration
- *************************************************************************/
-static void __init enp2611_timer_init(void)
-{
-	ixp2000_init_time(50 * 1000 * 1000);
-}
-
-static struct sys_timer enp2611_timer = {
-	.init		= enp2611_timer_init,
-	.offset		= ixp2000_gettimeoffset,
-};
-
-
-/*************************************************************************
- * ENP-2611 I/O
- *************************************************************************/
-static struct map_desc enp2611_io_desc[] __initdata = {
-	{
-		.virtual	= ENP2611_CALEB_VIRT_BASE,
-		.pfn		= __phys_to_pfn(ENP2611_CALEB_PHYS_BASE),
-		.length		= ENP2611_CALEB_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= ENP2611_PM3386_0_VIRT_BASE,
-		.pfn		= __phys_to_pfn(ENP2611_PM3386_0_PHYS_BASE),
-		.length		= ENP2611_PM3386_0_SIZE,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= ENP2611_PM3386_1_VIRT_BASE,
-		.pfn		= __phys_to_pfn(ENP2611_PM3386_1_PHYS_BASE),
-		.length		= ENP2611_PM3386_1_SIZE,
-		.type		= MT_DEVICE,
-	}
-};
-
-void __init enp2611_map_io(void)
-{
-	ixp2000_map_io();
-	iotable_init(enp2611_io_desc, ARRAY_SIZE(enp2611_io_desc));
-}
-
-
-/*************************************************************************
- * ENP-2611 PCI
- *************************************************************************/
-static int enp2611_pci_setup(int nr, struct pci_sys_data *sys)
-{
-	sys->mem_offset = 0xe0000000;
-	ixp2000_pci_setup(nr, sys);
-	return 1;
-}
-
-static void __init enp2611_pci_preinit(void)
-{
-	ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00100000);
-	ixp2000_pci_preinit();
-	pcibios_setup("firmware");
-}
-
-static inline int enp2611_pci_valid_device(struct pci_bus *bus,
-						unsigned int devfn)
-{
-	/* The 82559 ethernet controller appears at both PCI:1:0:0 and
-	 * PCI:1:2:0, so let's pretend the second one isn't there.
-	 */
-	if (bus->number == 0x01 && devfn == 0x10)
-		return 0;
-
-	return 1;
-}
-
-static int enp2611_pci_read_config(struct pci_bus *bus, unsigned int devfn,
-					int where, int size, u32 *value)
-{
-	if (enp2611_pci_valid_device(bus, devfn))
-		return ixp2000_pci_read_config(bus, devfn, where, size, value);
-
-	return PCIBIOS_DEVICE_NOT_FOUND;
-}
-
-static int enp2611_pci_write_config(struct pci_bus *bus, unsigned int devfn,
-					int where, int size, u32 value)
-{
-	if (enp2611_pci_valid_device(bus, devfn))
-		return ixp2000_pci_write_config(bus, devfn, where, size, value);
-
-	return PCIBIOS_DEVICE_NOT_FOUND;
-}
-
-static struct pci_ops enp2611_pci_ops = {
-	.read   = enp2611_pci_read_config,
-	.write  = enp2611_pci_write_config
-};
-
-static struct pci_bus * __init enp2611_pci_scan_bus(int nr,
-						struct pci_sys_data *sys)
-{
-	return pci_scan_root_bus(NULL, sys->busnr, &enp2611_pci_ops, sys,
-				 &sys->resources);
-}
-
-static int __init enp2611_pci_map_irq(const struct pci_dev *dev, u8 slot,
-	u8 pin)
-{
-	int irq;
-
-	if (dev->bus->number == 0 && PCI_SLOT(dev->devfn) == 0) {
-		/* IXP2400. */
-		irq = IRQ_IXP2000_PCIA;
-	} else if (dev->bus->number == 0 && PCI_SLOT(dev->devfn) == 1) {
-		/* 21555 non-transparent bridge.  */
-		irq = IRQ_IXP2000_PCIB;
-	} else if (dev->bus->number == 0 && PCI_SLOT(dev->devfn) == 4) {
-		/* PCI2050B transparent bridge.  */
-		irq = -1;
-	} else if (dev->bus->number == 1 && PCI_SLOT(dev->devfn) == 0) {
-		/* 82559 ethernet.  */
-		irq = IRQ_IXP2000_PCIA;
-	} else if (dev->bus->number == 1 && PCI_SLOT(dev->devfn) == 1) {
-		/* SPI-3 option board.  */
-		irq = IRQ_IXP2000_PCIB;
-	} else {
-		printk(KERN_ERR "enp2611_pci_map_irq() called for unknown "
-				"device PCI:%d:%d:%d\n", dev->bus->number,
-				PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
-		irq = -1;
-	}
-
-	return irq;
-}
-
-struct hw_pci enp2611_pci __initdata = {
-	.nr_controllers	= 1,
-	.setup		= enp2611_pci_setup,
-	.preinit	= enp2611_pci_preinit,
-	.scan		= enp2611_pci_scan_bus,
-	.map_irq	= enp2611_pci_map_irq,
-};
-
-int __init enp2611_pci_init(void)
-{
-	if (machine_is_enp2611())
-		pci_common_init(&enp2611_pci);
-
-	return 0;
-}
-
-subsys_initcall(enp2611_pci_init);
-
-
-/*************************************************************************
- * ENP-2611 Machine Initialization
- *************************************************************************/
-static struct flash_platform_data enp2611_flash_platform_data = {
-	.map_name	= "cfi_probe",
-	.width		= 1,
-};
-
-static struct ixp2000_flash_data enp2611_flash_data = {
-	.platform_data	= &enp2611_flash_platform_data,
-	.nr_banks	= 1
-};
-
-static struct resource enp2611_flash_resource = {
-	.start		= 0xc4000000,
-	.end		= 0xc4000000 + 0x00ffffff,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device enp2611_flash = {
-	.name		= "IXP2000-Flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &enp2611_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &enp2611_flash_resource,
-};
-
-static struct ixp2000_i2c_pins enp2611_i2c_gpio_pins = {
-	.sda_pin	= ENP2611_GPIO_SDA,
-	.scl_pin	= ENP2611_GPIO_SCL,
-};
-
-static struct platform_device enp2611_i2c_controller = {
-	.name		= "IXP2000-I2C",
-	.id		= 0,
-	.dev		= {
-		.platform_data = &enp2611_i2c_gpio_pins
-	},
-	.num_resources	= 0
-};
-
-static struct platform_device *enp2611_devices[] __initdata = {
-	&enp2611_flash,
-	&enp2611_i2c_controller
-};
-
-static void __init enp2611_init_machine(void)
-{
-	platform_add_devices(enp2611_devices, ARRAY_SIZE(enp2611_devices));
-	ixp2000_uart_init();
-}
-
-
-MACHINE_START(ENP2611, "Radisys ENP-2611 PCI network processor board")
-	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.atag_offset	= 0x100,
-	.map_io		= enp2611_map_io,
-	.init_irq	= ixp2000_init_irq,
-	.timer		= &enp2611_timer,
-	.init_machine	= enp2611_init_machine,
-	.restart	= ixp2000_restart,
-MACHINE_END
-
-