[ARM] 3817/1: iop3xx: split the iop3xx mach into iop32x and iop33x

Split the iop3xx mach type into iop32x and iop33x -- split the config
symbols, and move the code in the mach-iop3xx directory to the mach-iop32x
and mach-iop33x directories.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 0 insertions, 220 deletions

diff --git a/arch/arm/mach-iop3xx/iop321-pci.c b/arch/arm/mach-iop3xx/iop321-pci.c
deleted file mode 100644
index 8ba6a0e..0000000
--- a/arch/arm/mach-iop3xx/iop321-pci.c
+++ /dev/null
@@ -1,220 +0,0 @@
-/*
- * arch/arm/mach-iop3xx/iop321-pci.c
- *
- * PCI support for the Intel IOP321 chipset
- *
- * Author: Rory Bolt <rorybolt@pacbell.net>
- * Copyright (C) 2002 Rory Bolt
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/hardware.h>
-#include <asm/mach/pci.h>
-
-#include <asm/arch/iop321.h>
-
-// #define DEBUG
-
-#ifdef DEBUG
-#define  DBG(x...) printk(x)
-#else
-#define  DBG(x...) do { } while (0)
-#endif
-
-/*
- * This routine builds either a type0 or type1 configuration command.  If the
- * bus is on the 80321 then a type0 made, else a type1 is created.
- */
-static u32 iop321_cfg_address(struct pci_bus *bus, int devfn, int where)
-{
-	struct pci_sys_data *sys = bus->sysdata;
-	u32 addr;
-
-	if (sys->busnr == bus->number)
-		addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11);
-	else
-		addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1;
-
-	addr |=	PCI_FUNC(devfn) << 8 | (where & ~3);
-
-	return addr;
-}
-
-/*
- * This routine checks the status of the last configuration cycle.  If an error
- * was detected it returns a 1, else it returns a 0.  The errors being checked
- * are parity, master abort, target abort (master and target).  These types of
- * errors occure during a config cycle where there is no device, like during
- * the discovery stage.
- */
-static int iop321_pci_status(void)
-{
-	unsigned int status;
-	int ret = 0;
-
-	/*
-	 * Check the status registers.
-	 */
-	status = *IOP321_ATUSR;
-	if (status & 0xf900)
-	{
-		DBG("\t\t\tPCI: P0 - status = 0x%08x\n", status);
-		*IOP321_ATUSR = status & 0xf900;
-		ret = 1;
-	}
-	status = *IOP321_ATUISR;
-	if (status & 0x679f)
-	{
-		DBG("\t\t\tPCI: P1 - status = 0x%08x\n", status);
-		*IOP321_ATUISR = status & 0x679f;
-		ret = 1;
-	}
-	return ret;
-}
-
-/*
- * Simply write the address register and read the configuration
- * data.  Note that the 4 nop's ensure that we are able to handle
- * a delayed abort (in theory.)
- */
-static inline u32 iop321_read(unsigned long addr)
-{
-	u32 val;
-
-	__asm__ __volatile__(
-		"str	%1, [%2]\n\t"
-		"ldr	%0, [%3]\n\t"
-		"nop\n\t"
-		"nop\n\t"
-		"nop\n\t"
-		"nop\n\t"
-		: "=r" (val)
-		: "r" (addr), "r" (IOP321_OCCAR), "r" (IOP321_OCCDR));
-
-	return val;
-}
-
-/*
- * The read routines must check the error status of the last configuration
- * cycle.  If there was an error, the routine returns all hex f's.
- */
-static int
-iop321_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-		int size, u32 *value)
-{
-	unsigned long addr = iop321_cfg_address(bus, devfn, where);
-	u32 val = iop321_read(addr) >> ((where & 3) * 8);
-
-	if( iop321_pci_status() )
-		val = 0xffffffff;
-
-	*value = val;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-iop321_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-		int size, u32 value)
-{
-	unsigned long addr = iop321_cfg_address(bus, devfn, where);
-	u32 val;
-
-	if (size != 4) {
-		val = iop321_read(addr);
-		if (!iop321_pci_status() == 0)
-			return PCIBIOS_SUCCESSFUL;
-
-		where = (where & 3) * 8;
-
-		if (size == 1)
-			val &= ~(0xff << where);
-		else
-			val &= ~(0xffff << where);
-
-		*IOP321_OCCDR = val | value << where;
-	} else {
-		asm volatile(
-			"str	%1, [%2]\n\t"
-			"str	%0, [%3]\n\t"
-			"nop\n\t"
-			"nop\n\t"
-			"nop\n\t"
-			"nop\n\t"
-			:
-			: "r" (value), "r" (addr),
-			  "r" (IOP321_OCCAR), "r" (IOP321_OCCDR));
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops iop321_ops = {
-	.read	= iop321_read_config,
-	.write	= iop321_write_config,
-};
-
-/*
- * When a PCI device does not exist during config cycles, the 80200 gets a
- * bus error instead of returning 0xffffffff. This handler simply returns.
- */
-int
-iop321_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
-{
-	DBG("PCI abort: address = 0x%08lx fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx\n",
-		addr, fsr, regs->ARM_pc, regs->ARM_lr);
-
-	/*
-	 * If it was an imprecise abort, then we need to correct the
-	 * return address to be _after_ the instruction.
-	 */
-	if (fsr & (1 << 10))
-		regs->ARM_pc += 4;
-
-	return 0;
-}
-
-/*
- * Scan an IOP321 PCI bus.  sys->bus defines which bus we scan.
- */
-struct pci_bus *iop321_scan_bus(int nr, struct pci_sys_data *sys)
-{
-	return pci_scan_bus(sys->busnr, &iop321_ops, sys);
-}
-
-void iop321_init(void)
-{
-	DBG("PCI:  Intel 80321 PCI init code.\n");
-	DBG("ATU: IOP321_ATUCMD=0x%04x\n", *IOP321_ATUCMD);
-	DBG("ATU: IOP321_OMWTVR0=0x%04x, IOP321_OIOWTVR=0x%04x\n",
-			*IOP321_OMWTVR0,
-			*IOP321_OIOWTVR);
-	DBG("ATU: IOP321_ATUCR=0x%08x\n", *IOP321_ATUCR);
-	DBG("ATU: IOP321_IABAR0=0x%08x IOP321_IALR0=0x%08x IOP321_IATVR0=%08x\n",
-			*IOP321_IABAR0, *IOP321_IALR0, *IOP321_IATVR0);
-	DBG("ATU: IOP321_OMWTVR0=0x%08x\n", *IOP321_OMWTVR0);
-	DBG("ATU: IOP321_IABAR1=0x%08x IOP321_IALR1=0x%08x\n",
-			*IOP321_IABAR1, *IOP321_IALR1);
-	DBG("ATU: IOP321_ERBAR=0x%08x IOP321_ERLR=0x%08x IOP321_ERTVR=%08x\n",
-			*IOP321_ERBAR, *IOP321_ERLR, *IOP321_ERTVR);
-	DBG("ATU: IOP321_IABAR2=0x%08x IOP321_IALR2=0x%08x IOP321_IATVR2=%08x\n",
-			*IOP321_IABAR2, *IOP321_IALR2, *IOP321_IATVR2);
-	DBG("ATU: IOP321_IABAR3=0x%08x IOP321_IALR3=0x%08x IOP321_IATVR3=%08x\n",
-			*IOP321_IABAR3, *IOP321_IALR3, *IOP321_IATVR3);
-
-	hook_fault_code(16+6, iop321_pci_abort, SIGBUS, "imprecise external abort");
-}
-