Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Arnd Bergmann:
 "This time around, the cleanup branch contains mostly code removal.  A
  number of board files for at91, imx and msm have become obsolete
  because of the DT conversion and are now ready to be removed.  The
  OMAP platform has traditionally had its own DMA engine abstraction and
  as this is being phased out, a lot of the original code is now unused
  and can be removed as well.

  S3C24xx can be simplified now that the restart code is a proper device
  driver.

  Finally, a number of cleanups in shmobile are done to prepare for the
  addition of new code in other branches"

* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits)
  ARM: at91: Remove the support for the RSI EWS board
  arm: mach-omap2: Convert pr_warning to pr_warn
  ARM: OMAP: Remove unused pieces of legacy DMA API
  ARM: at91: remove board file for Acme Systems Fox G20
  ARM: orion5x: Convert pr_warning to pr_warn
  ARM: S3C24XX: remove separate restart code
  ARM: EXYNOS: Do not calculate boot address twice
  ARM: sunxi: Remove sun4i reboot code from mach directory
  ARM: imx: Remove mach-mxt_td60 board file
  ARM: shmobile: armadillo800eva legacy: Use rmobile_add_devices_to_domains()
  ARM: shmobile: r8a7740: Clean up pm domain table
  ARM: shmobile: r8a7740: Use rmobile_add_devices_to_domains()
  ARM: shmobile: sh7372: Make domain_devices[] static __initdata
  ARM: shmobile: mackerel: Make domain_devices[] static __initdata
  clocksource: tcb_clksrc: sanitize IRQ request
  ARM: at91/tclib: mask interruptions at shutdown and probe
  ARM: at91/tclib: move initialization from alloc to probe
  ARM: at91/tclib: prefer using of devm_* functions
  ARM: clps711x: Switch CLPS711X subarch to use clk and clocksource driver
  ARM: shmobile: r8a7791 is now called "R-Car M2-W"
  ...

16 files changed, 1 insertions, 1869 deletions

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index be9a51a..4e9b4f6 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -108,17 +108,6 @@ config SOC_IMX35
 if ARCH_MULTI_V4T
 
 comment "MX1 platforms:"
-config MACH_MXLADS
-	bool
-
-config ARCH_MX1ADS
-	bool "MX1ADS platform"
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select MACH_MXLADS
-	select SOC_IMX1
-	help
-	  Say Y here if you are using Motorola MX1ADS/MXLADS boards
 
 config MACH_SCB9328
 	bool "Synertronixx scb9328"
@@ -223,86 +212,6 @@ config MACH_MX27ADS
 	  Include support for MX27ADS platform. This includes specific
 	  configurations for the board and its peripherals.
 
-config MACH_PCM038
-	bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_MXC_W1
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	select USB_ULPI_VIEWPORT if USB_ULPI
-	select SOC_IMX27
-	help
-	  Include support for phyCORE-i.MX27 (aka pcm038) platform. This
-	  includes specific configurations for the module and its peripherals.
-
-choice
-	prompt "Baseboard"
-	depends on MACH_PCM038
-	default MACH_PCM970_BASEBOARD
-
-config MACH_PCM970_BASEBOARD
-	bool "PHYTEC PCM970 development board"
-	select IMX_HAVE_PLATFORM_IMX_FB
-	select IMX_HAVE_PLATFORM_MXC_MMC
-	help
-	  This adds board specific devices that can be found on Phytec's
-	  PCM970 evaluation board.
-
-endchoice
-
-config MACH_CPUIMX27
-	bool "Eukrea CPUIMX27 module"
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_MXC_W1
-	select USB_ULPI_VIEWPORT if USB_ULPI
-	select SOC_IMX27
-	help
-	  Include support for Eukrea CPUIMX27 platform. This includes
-	  specific configurations for the module and its peripherals.
-
-config MACH_EUKREA_CPUIMX27_USESDHC2
-	bool "CPUIMX27 integrates SDHC2 module"
-	depends on MACH_CPUIMX27
-	select IMX_HAVE_PLATFORM_MXC_MMC
-	help
-	  This adds support for the internal SDHC2 used on CPUIMX27
-	  for wifi or eMMC.
-
-config MACH_EUKREA_CPUIMX27_USEUART4
-	bool "CPUIMX27 integrates UART4 module"
-	depends on MACH_CPUIMX27
-	help
-	  This adds support for the internal UART4 used on CPUIMX27
-	  for bluetooth.
-
-choice
-	prompt "Baseboard"
-	depends on MACH_CPUIMX27
-	default MACH_EUKREA_MBIMX27_BASEBOARD
-
-config MACH_EUKREA_MBIMX27_BASEBOARD
-	bool "Eukrea MBIMX27 development board"
-	select IMX_HAVE_PLATFORM_IMX_FB
-	select IMX_HAVE_PLATFORM_IMX_KEYPAD
-	select IMX_HAVE_PLATFORM_IMX_SSI
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_MMC
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	select LEDS_GPIO_REGISTER
-	help
-	  This adds board specific devices that can be found on Eukrea's
-	  MBIMX27 evaluation board.
-
-endchoice
-
 config MACH_MX27_3DS
 	bool "MX27PDK platform"
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
@@ -359,18 +268,6 @@ config MACH_PCA100
 	  Include support for phyCARD-s (aka pca100) platform. This
 	  includes specific configurations for the module and its peripherals.
 
-config MACH_MXT_TD60
-	bool "Maxtrack i-MXT TD60"
-	select IMX_HAVE_PLATFORM_IMX_FB
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_MMC
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select SOC_IMX27
-	help
-	  Include support for i-MXT (aka td60) platform. This
-	  includes specific configurations for the module and its peripherals.
-
 config MACH_IMX27_DT
 	bool "Support i.MX27 platforms from device tree"
 	select SOC_IMX27
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 23c0293..4147729 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -41,7 +41,6 @@ obj-y += ssi-fiq-ksym.o
 endif
 
 # i.MX1 based machines
-obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o
 obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
 obj-$(CONFIG_MACH_APF9328) += mach-apf9328.o
 
@@ -56,14 +55,9 @@ obj-$(CONFIG_MACH_IMX25_DT) += imx25-dt.o
 
 # i.MX27 based machines
 obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
-obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
-obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
 obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o
 obj-$(CONFIG_MACH_IMX27_VISSTRIM_M10) += mach-imx27_visstrim_m10.o
-obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o
-obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
 obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
-obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o
 obj-$(CONFIG_MACH_IMX27_DT) += imx27-dt.o
 
 # i.MX31 based machines
diff --git a/arch/arm/mach-imx/board-pcm038.h b/arch/arm/mach-imx/board-pcm038.h
deleted file mode 100644
index 6f371e3..0000000
--- a/arch/arm/mach-imx/board-pcm038.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_MXC_BOARD_PCM038_H__
-#define __ASM_ARCH_MXC_BOARD_PCM038_H__
-
-#ifndef __ASSEMBLY__
-/*
- * This CPU module needs a baseboard to work. After basic initializing
- * its own devices, it calls the baseboard's init function.
- * TODO: Add your own baseboard init function and call it from
- * inside pcm038_init().
- *
- * This example here is for the development board. Refer pcm970-baseboard.c
- */
-
-extern void pcm970_baseboard_init(void);
-
-#endif
-
-#endif /* __ASM_ARCH_MXC_BOARD_PCM038_H__ */
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 22ba897..1dabf43 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -98,11 +98,9 @@ void imx_set_cpu_arg(int cpu, u32 arg);
 void v7_secondary_startup(void);
 void imx_scu_map_io(void);
 void imx_smp_prepare(void);
-void imx_scu_standby_enable(void);
 #else
 static inline void imx_scu_map_io(void) {}
 static inline void imx_smp_prepare(void) {}
-static inline void imx_scu_standby_enable(void) {}
 #endif
 void imx_src_init(void);
 void imx_gpc_init(void);
diff --git a/arch/arm/mach-imx/cpuidle-imx6q.c b/arch/arm/mach-imx/cpuidle-imx6q.c
index 10844d3..aa93578 100644
--- a/arch/arm/mach-imx/cpuidle-imx6q.c
+++ b/arch/arm/mach-imx/cpuidle-imx6q.c
@@ -66,10 +66,6 @@ static struct cpuidle_driver imx6q_cpuidle_driver = {
 
 int __init imx6q_cpuidle_init(void)
 {
-	/* Need to enable SCU standby for entering WAIT modes */
-	if (!cpu_is_imx6sx())
-		imx_scu_standby_enable();
-
 	/* Set INT_MEM_CLK_LPM bit to get a reliable WAIT mode support */
 	imx6q_set_int_mem_clk_lpm(true);
 
diff --git a/arch/arm/mach-imx/eukrea-baseboards.h b/arch/arm/mach-imx/eukrea-baseboards.h
index a21d331..bb2c90d 100644
--- a/arch/arm/mach-imx/eukrea-baseboards.h
+++ b/arch/arm/mach-imx/eukrea-baseboards.h
@@ -27,23 +27,15 @@
  * This CPU module needs a baseboard to work. After basic initializing
  * its own devices, it calls baseboard's init function.
  * TODO: Add your own baseboard init function and call it from
- * inside eukrea_cpuimx25_init() eukrea_cpuimx27_init()
- * eukrea_cpuimx35_init() eukrea_cpuimx51_init()
- * or eukrea_cpuimx51sd_init().
+ * inside eukrea_cpuimx25_init() or eukrea_cpuimx35_init()
  *
  * This example here is for the development board. Refer
  * mach-mx25/eukrea_mbimxsd-baseboard.c for cpuimx25
- * mach-imx/eukrea_mbimx27-baseboard.c for cpuimx27
  * mach-mx3/eukrea_mbimxsd-baseboard.c for cpuimx35
- * mach-mx5/eukrea_mbimx51-baseboard.c for cpuimx51
- * mach-mx5/eukrea_mbimxsd-baseboard.c for cpuimx51sd
  */
 
 extern void eukrea_mbimxsd25_baseboard_init(void);
-extern void eukrea_mbimx27_baseboard_init(void);
 extern void eukrea_mbimxsd35_baseboard_init(void);
-extern void eukrea_mbimx51_baseboard_init(void);
-extern void eukrea_mbimxsd51_baseboard_init(void);
 
 #endif
 
diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
deleted file mode 100644
index b2f08bf..0000000
--- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
+++ /dev/null
@@ -1,351 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Eric Benard - eric@eukrea.com
- *
- * Based on pcm970-baseboard.c which is :
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/backlight.h>
-#include <video/platform_lcd.h>
-
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "devices-imx27.h"
-#include "hardware.h"
-#include "iomux-mx27.h"
-
-static const int eukrea_mbimx27_pins[] __initconst = {
-	/* UART2 */
-	PE3_PF_UART2_CTS,
-	PE4_PF_UART2_RTS,
-	PE6_PF_UART2_TXD,
-	PE7_PF_UART2_RXD,
-	/* UART3 */
-	PE8_PF_UART3_TXD,
-	PE9_PF_UART3_RXD,
-	PE10_PF_UART3_CTS,
-	PE11_PF_UART3_RTS,
-	/* UART4 */
-#if !defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4)
-	PB26_AF_UART4_RTS,
-	PB28_AF_UART4_TXD,
-	PB29_AF_UART4_CTS,
-	PB31_AF_UART4_RXD,
-#endif
-	/* SDHC1*/
-	PE18_PF_SD1_D0,
-	PE19_PF_SD1_D1,
-	PE20_PF_SD1_D2,
-	PE21_PF_SD1_D3,
-	PE22_PF_SD1_CMD,
-	PE23_PF_SD1_CLK,
-	/* display */
-	PA5_PF_LSCLK,
-	PA6_PF_LD0,
-	PA7_PF_LD1,
-	PA8_PF_LD2,
-	PA9_PF_LD3,
-	PA10_PF_LD4,
-	PA11_PF_LD5,
-	PA12_PF_LD6,
-	PA13_PF_LD7,
-	PA14_PF_LD8,
-	PA15_PF_LD9,
-	PA16_PF_LD10,
-	PA17_PF_LD11,
-	PA18_PF_LD12,
-	PA19_PF_LD13,
-	PA20_PF_LD14,
-	PA21_PF_LD15,
-	PA22_PF_LD16,
-	PA23_PF_LD17,
-	PA28_PF_HSYNC,
-	PA29_PF_VSYNC,
-	PA30_PF_CONTRAST,
-	PA31_PF_OE_ACD,
-	/* SPI1 */
-	PD29_PF_CSPI1_SCLK,
-	PD30_PF_CSPI1_MISO,
-	PD31_PF_CSPI1_MOSI,
-	/* SSI4 */
-#if defined(CONFIG_SND_SOC_EUKREA_TLV320) \
-	|| defined(CONFIG_SND_SOC_EUKREA_TLV320_MODULE)
-	PC16_PF_SSI4_FS,
-	PC17_PF_SSI4_RXD | GPIO_PUEN,
-	PC18_PF_SSI4_TXD | GPIO_PUEN,
-	PC19_PF_SSI4_CLK,
-#endif
-};
-
-static const uint32_t eukrea_mbimx27_keymap[] = {
-	KEY(0, 0, KEY_UP),
-	KEY(0, 1, KEY_DOWN),
-	KEY(1, 0, KEY_RIGHT),
-	KEY(1, 1, KEY_LEFT),
-};
-
-static const struct matrix_keymap_data
-eukrea_mbimx27_keymap_data __initconst = {
-	.keymap         = eukrea_mbimx27_keymap,
-	.keymap_size    = ARRAY_SIZE(eukrea_mbimx27_keymap),
-};
-
-static const struct gpio_led eukrea_mbimx27_gpio_leds[] __initconst = {
-	{
-		.name			= "led1",
-		.default_trigger	= "heartbeat",
-		.active_low		= 1,
-		.gpio			= GPIO_PORTF | 16,
-	},
-	{
-		.name			= "led2",
-		.default_trigger	= "none",
-		.active_low		= 1,
-		.gpio			= GPIO_PORTF | 19,
-	},
-};
-
-static const struct gpio_led_platform_data
-		eukrea_mbimx27_gpio_led_info __initconst = {
-	.leds		= eukrea_mbimx27_gpio_leds,
-	.num_leds	= ARRAY_SIZE(eukrea_mbimx27_gpio_leds),
-};
-
-static struct imx_fb_videomode eukrea_mbimx27_modes[] = {
-	{
-		.mode = {
-			.name		= "CMO-QVGA",
-			.refresh	= 60,
-			.xres		= 320,
-			.yres		= 240,
-			.pixclock	= 156000,
-			.hsync_len	= 30,
-			.left_margin	= 38,
-			.right_margin	= 20,
-			.vsync_len	= 3,
-			.upper_margin	= 15,
-			.lower_margin	= 4,
-		},
-		.pcr		= 0xFAD08B80,
-		.bpp		= 16,
-	}, {
-		.mode = {
-			.name		= "DVI-VGA",
-			.refresh	= 60,
-			.xres		= 640,
-			.yres		= 480,
-			.pixclock	= 32000,
-			.hsync_len	= 1,
-			.left_margin	= 35,
-			.right_margin	= 0,
-			.vsync_len	= 1,
-			.upper_margin	= 7,
-			.lower_margin	= 0,
-		},
-		.pcr		= 0xFA208B80,
-		.bpp		= 16,
-	}, {
-		.mode = {
-			.name		= "DVI-SVGA",
-			.refresh	= 60,
-			.xres		= 800,
-			.yres		= 600,
-			.pixclock	= 25000,
-			.hsync_len	= 1,
-			.left_margin	= 35,
-			.right_margin	= 0,
-			.vsync_len	= 1,
-			.upper_margin	= 7,
-			.lower_margin	= 0,
-		},
-		.pcr		= 0xFA208B80,
-		.bpp		= 16,
-	},
-};
-
-static const struct imx_fb_platform_data eukrea_mbimx27_fb_data __initconst = {
-	.mode = eukrea_mbimx27_modes,
-	.num_modes = ARRAY_SIZE(eukrea_mbimx27_modes),
-
-	.pwmr		= 0x00A903FF,
-	.lscr1		= 0x00120300,
-	.dmacr		= 0x00040060,
-};
-
-static void eukrea_mbimx27_bl_set_intensity(int intensity)
-{
-	if (intensity)
-		gpio_direction_output(GPIO_PORTE | 5, 1);
-	else
-		gpio_direction_output(GPIO_PORTE | 5, 0);
-}
-
-static struct generic_bl_info eukrea_mbimx27_bl_info = {
-	.name			= "eukrea_mbimx27-bl",
-	.max_intensity		= 0xff,
-	.default_intensity	= 0xff,
-	.set_bl_intensity	= eukrea_mbimx27_bl_set_intensity,
-};
-
-static struct platform_device eukrea_mbimx27_bl_dev = {
-	.name			= "generic-bl",
-	.id			= 1,
-	.dev = {
-		.platform_data	= &eukrea_mbimx27_bl_info,
-	},
-};
-
-static void eukrea_mbimx27_lcd_power_set(struct plat_lcd_data *pd,
-				   unsigned int power)
-{
-	if (power)
-		gpio_direction_output(GPIO_PORTA | 25, 1);
-	else
-		gpio_direction_output(GPIO_PORTA | 25, 0);
-}
-
-static struct plat_lcd_data eukrea_mbimx27_lcd_power_data = {
-	.set_power		= eukrea_mbimx27_lcd_power_set,
-};
-
-static struct platform_device eukrea_mbimx27_lcd_powerdev = {
-	.name			= "platform-lcd",
-	.dev.platform_data	= &eukrea_mbimx27_lcd_power_data,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-#define ADS7846_PENDOWN (GPIO_PORTD | 25)
-
-static void __maybe_unused ads7846_dev_init(void)
-{
-	if (gpio_request(ADS7846_PENDOWN, "ADS7846 pendown") < 0) {
-		printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
-		return;
-	}
-	gpio_direction_input(ADS7846_PENDOWN);
-}
-
-static int ads7846_get_pendown_state(void)
-{
-	return !gpio_get_value(ADS7846_PENDOWN);
-}
-
-static struct ads7846_platform_data ads7846_config __initdata = {
-	.get_pendown_state	= ads7846_get_pendown_state,
-	.keep_vref_on		= 1,
-};
-
-static struct spi_board_info __maybe_unused
-		eukrea_mbimx27_spi_board_info[] __initdata = {
-	[0] = {
-		.modalias	= "ads7846",
-		.bus_num	= 0,
-		.chip_select	= 0,
-		.max_speed_hz	= 1500000,
-		/* irq number is run-time assigned */
-		.platform_data	= &ads7846_config,
-		.mode           = SPI_MODE_2,
-	},
-};
-
-static int eukrea_mbimx27_spi_cs[] = {GPIO_PORTD | 28};
-
-static const struct spi_imx_master eukrea_mbimx27_spi0_data __initconst = {
-	.chipselect	= eukrea_mbimx27_spi_cs,
-	.num_chipselect = ARRAY_SIZE(eukrea_mbimx27_spi_cs),
-};
-
-static struct i2c_board_info eukrea_mbimx27_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("tlv320aic23", 0x1a),
-	},
-};
-
-static const struct imxmmc_platform_data sdhc_pdata __initconst = {
-	.dat3_card_detect = 1,
-};
-
-static const
-struct imx_ssi_platform_data eukrea_mbimx27_ssi_pdata __initconst = {
-	.flags = IMX_SSI_DMA | IMX_SSI_USE_I2S_SLAVE,
-};
-
-/*
- * system init for baseboard usage. Will be called by cpuimx27 init.
- *
- * Add platform devices present on this baseboard and init
- * them from CPU side as far as required to use them later on
- */
-void __init eukrea_mbimx27_baseboard_init(void)
-{
-	mxc_gpio_setup_multiple_pins(eukrea_mbimx27_pins,
-		ARRAY_SIZE(eukrea_mbimx27_pins), "MBIMX27");
-
-	imx27_add_imx_uart1(&uart_pdata);
-	imx27_add_imx_uart2(&uart_pdata);
-#if !defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4)
-	imx27_add_imx_uart3(&uart_pdata);
-#endif
-
-	imx27_add_imx_fb(&eukrea_mbimx27_fb_data);
-	imx27_add_mxc_mmc(0, &sdhc_pdata);
-
-	i2c_register_board_info(0, eukrea_mbimx27_i2c_devices,
-				ARRAY_SIZE(eukrea_mbimx27_i2c_devices));
-
-	imx27_add_imx_ssi(0, &eukrea_mbimx27_ssi_pdata);
-
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) \
-	|| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-	/* ADS7846 Touchscreen controller init */
-	mxc_gpio_mode(GPIO_PORTD | 25 | GPIO_GPIO | GPIO_IN);
-	ads7846_dev_init();
-#endif
-
-	/* SPI_CS0 init */
-	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
-	imx27_add_spi_imx0(&eukrea_mbimx27_spi0_data);
-	eukrea_mbimx27_spi_board_info[0].irq = gpio_to_irq(IMX_GPIO_NR(4, 25));
-	spi_register_board_info(eukrea_mbimx27_spi_board_info,
-			ARRAY_SIZE(eukrea_mbimx27_spi_board_info));
-
-	/* Leds configuration */
-	mxc_gpio_mode(GPIO_PORTF | 16 | GPIO_GPIO | GPIO_OUT);
-	mxc_gpio_mode(GPIO_PORTF | 19 | GPIO_GPIO | GPIO_OUT);
-	/* Backlight */
-	mxc_gpio_mode(GPIO_PORTE | 5 | GPIO_GPIO | GPIO_OUT);
-	gpio_request(GPIO_PORTE | 5, "backlight");
-	platform_device_register(&eukrea_mbimx27_bl_dev);
-	/* LCD Reset */
-	mxc_gpio_mode(GPIO_PORTA | 25 | GPIO_GPIO | GPIO_OUT);
-	gpio_request(GPIO_PORTA | 25, "lcd_enable");
-	platform_device_register(&eukrea_mbimx27_lcd_powerdev);
-
-	imx27_add_imx_keypad(&eukrea_mbimx27_keymap_data);
-
-	gpio_led_register_device(-1, &eukrea_mbimx27_gpio_led_info);
-	imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0);
-}
diff --git a/arch/arm/mach-imx/iomux-imx31.c b/arch/arm/mach-imx/iomux-imx31.c
index 7c66805..1657fe6 100644
--- a/arch/arm/mach-imx/iomux-imx31.c
+++ b/arch/arm/mach-imx/iomux-imx31.c
@@ -64,7 +64,6 @@ int mxc_iomux_mode(unsigned int pin_mode)
 
 	return ret;
 }
-EXPORT_SYMBOL(mxc_iomux_mode);
 
 /*
  * This function configures the pad value for a IOMUX pin.
@@ -90,7 +89,6 @@ void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
 
 	spin_unlock(&gpio_mux_lock);
 }
-EXPORT_SYMBOL(mxc_iomux_set_pad);
 
 /*
  * allocs a single pin:
@@ -116,7 +114,6 @@ int mxc_iomux_alloc_pin(unsigned int pin, const char *label)
 
 	return 0;
 }
-EXPORT_SYMBOL(mxc_iomux_alloc_pin);
 
 int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count,
 		const char *label)
@@ -137,7 +134,6 @@ setup_error:
 	mxc_iomux_release_multiple_pins(pin_list, i);
 	return ret;
 }
-EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins);
 
 void mxc_iomux_release_pin(unsigned int pin)
 {
@@ -146,7 +142,6 @@ void mxc_iomux_release_pin(unsigned int pin)
 	if (pad < (PIN_MAX + 1))
 		clear_bit(pad, mxc_pin_alloc_map);
 }
-EXPORT_SYMBOL(mxc_iomux_release_pin);
 
 void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count)
 {
@@ -158,7 +153,6 @@ void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count)
 		p++;
 	}
 }
-EXPORT_SYMBOL(mxc_iomux_release_multiple_pins);
 
 /*
  * This function enables/disables the general purpose function for a particular
@@ -178,4 +172,3 @@ void mxc_iomux_set_gpr(enum iomux_gp_func gp, bool en)
 	__raw_writel(l, IOMUXGPR);
 	spin_unlock(&gpio_mux_lock);
 }
-EXPORT_SYMBOL(mxc_iomux_set_gpr);
diff --git a/arch/arm/mach-imx/iomux-v1.c b/arch/arm/mach-imx/iomux-v1.c
index 2b156d1..ecd5436 100644
--- a/arch/arm/mach-imx/iomux-v1.c
+++ b/arch/arm/mach-imx/iomux-v1.c
@@ -153,7 +153,6 @@ int mxc_gpio_mode(int gpio_mode)
 
 	return 0;
 }
-EXPORT_SYMBOL(mxc_gpio_mode);
 
 static int imx_iomuxv1_setup_multiple(const int *list, unsigned count)
 {
@@ -178,7 +177,6 @@ int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
 	ret = imx_iomuxv1_setup_multiple(pin_list, count);
 	return ret;
 }
-EXPORT_SYMBOL(mxc_gpio_setup_multiple_pins);
 
 int __init imx_iomuxv1_init(void __iomem *base, int numports)
 {
diff --git a/arch/arm/mach-imx/iomux-v3.c b/arch/arm/mach-imx/iomux-v3.c
index 9dae74b..d61f960 100644
--- a/arch/arm/mach-imx/iomux-v3.c
+++ b/arch/arm/mach-imx/iomux-v3.c
@@ -55,7 +55,6 @@ int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad)
 
 	return 0;
 }
-EXPORT_SYMBOL(mxc_iomux_v3_setup_pad);
 
 int mxc_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count)
 {
@@ -71,7 +70,6 @@ int mxc_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count)
 	}
 	return 0;
 }
-EXPORT_SYMBOL(mxc_iomux_v3_setup_multiple_pads);
 
 void mxc_iomux_v3_init(void __iomem *iomux_v3_base)
 {
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
deleted file mode 100644
index e6d4b99..0000000
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ /dev/null
@@ -1,321 +0,0 @@
-/*
- * Copyright (C) 2009 Eric Benard - eric@eukrea.com
- *
- * Based on pcm038.c which is :
- * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/i2c.h>
-#include <linux/io.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/usb/otg.h>
-#include <linux/usb/ulpi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "devices-imx27.h"
-#include "ehci.h"
-#include "eukrea-baseboards.h"
-#include "hardware.h"
-#include "iomux-mx27.h"
-#include "ulpi.h"
-
-static const int eukrea_cpuimx27_pins[] __initconst = {
-	/* UART1 */
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	PE14_PF_UART1_CTS,
-	PE15_PF_UART1_RTS,
-	/* UART4 */
-#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4)
-	PB26_AF_UART4_RTS,
-	PB28_AF_UART4_TXD,
-	PB29_AF_UART4_CTS,
-	PB31_AF_UART4_RXD,
-#endif
-	/* FEC */
-	PD0_AIN_FEC_TXD0,
-	PD1_AIN_FEC_TXD1,
-	PD2_AIN_FEC_TXD2,
-	PD3_AIN_FEC_TXD3,
-	PD4_AOUT_FEC_RX_ER,
-	PD5_AOUT_FEC_RXD1,
-	PD6_AOUT_FEC_RXD2,
-	PD7_AOUT_FEC_RXD3,
-	PD8_AF_FEC_MDIO,
-	PD9_AIN_FEC_MDC,
-	PD10_AOUT_FEC_CRS,
-	PD11_AOUT_FEC_TX_CLK,
-	PD12_AOUT_FEC_RXD0,
-	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_RX_CLK,
-	PD15_AOUT_FEC_COL,
-	PD16_AIN_FEC_TX_ER,
-	PF23_AIN_FEC_TX_EN,
-	/* I2C1 */
-	PD17_PF_I2C_DATA,
-	PD18_PF_I2C_CLK,
-	/* SDHC2 */
-#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
-	PB4_PF_SD2_D0,
-	PB5_PF_SD2_D1,
-	PB6_PF_SD2_D2,
-	PB7_PF_SD2_D3,
-	PB8_PF_SD2_CMD,
-	PB9_PF_SD2_CLK,
-#endif
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
-	/* Quad UART's IRQ */
-	GPIO_PORTB | 22 | GPIO_GPIO | GPIO_IN,
-	GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN,
-	GPIO_PORTB | 27 | GPIO_GPIO | GPIO_IN,
-	GPIO_PORTB | 30 | GPIO_GPIO | GPIO_IN,
-#endif
-	/* OTG */
-	PC7_PF_USBOTG_DATA5,
-	PC8_PF_USBOTG_DATA6,
-	PC9_PF_USBOTG_DATA0,
-	PC10_PF_USBOTG_DATA2,
-	PC11_PF_USBOTG_DATA1,
-	PC12_PF_USBOTG_DATA4,
-	PC13_PF_USBOTG_DATA3,
-	PE0_PF_USBOTG_NXT,
-	PE1_PF_USBOTG_STP,
-	PE2_PF_USBOTG_DIR,
-	PE24_PF_USBOTG_CLK,
-	PE25_PF_USBOTG_DATA7,
-	/* USBH2 */
-	PA0_PF_USBH2_CLK,
-	PA1_PF_USBH2_DIR,
-	PA2_PF_USBH2_DATA7,
-	PA3_PF_USBH2_NXT,
-	PA4_PF_USBH2_STP,
-	PD19_AF_USBH2_DATA4,
-	PD20_AF_USBH2_DATA3,
-	PD21_AF_USBH2_DATA6,
-	PD22_AF_USBH2_DATA0,
-	PD23_AF_USBH2_DATA2,
-	PD24_AF_USBH2_DATA1,
-	PD26_AF_USBH2_DATA5,
-};
-
-static struct physmap_flash_data eukrea_cpuimx27_flash_data = {
-	.width = 2,
-};
-
-static struct resource eukrea_cpuimx27_flash_resource = {
-	.start = 0xc0000000,
-	.end   = 0xc3ffffff,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platform_device eukrea_cpuimx27_nor_mtd_device = {
-	.name = "physmap-flash",
-	.id = 0,
-	.dev = {
-		.platform_data = &eukrea_cpuimx27_flash_data,
-	},
-	.num_resources = 1,
-	.resource = &eukrea_cpuimx27_flash_resource,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct mxc_nand_platform_data
-cpuimx27_nand_board_info __initconst = {
-	.width = 1,
-	.hw_ecc = 1,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
-	&eukrea_cpuimx27_nor_mtd_device,
-};
-
-static const struct imxi2c_platform_data cpuimx27_i2c1_data __initconst = {
-	.bitrate = 100000,
-};
-
-static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	},
-};
-
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
-static struct plat_serial8250_port serial_platform_data[] = {
-	{
-		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x200000),
-		/* irq number is run-time assigned */
-		.uartclk = 14745600,
-		.regshift = 1,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x400000),
-		/* irq number is run-time assigned */
-		.uartclk = 14745600,
-		.regshift = 1,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x800000),
-		/* irq number is run-time assigned */
-		.uartclk = 14745600,
-		.regshift = 1,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x1000000),
-		/* irq number is run-time assigned */
-		.uartclk = 14745600,
-		.regshift = 1,
-		.iotype = UPIO_MEM,
-		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
-	}, {
-	}
-};
-
-static struct platform_device serial_device = {
-	.name = "serial8250",
-	.id = 0,
-	.dev = {
-		.platform_data = serial_platform_data,
-	},
-};
-#endif
-
-static int eukrea_cpuimx27_otg_init(struct platform_device *pdev)
-{
-	return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static struct mxc_usbh_platform_data otg_pdata __initdata = {
-	.init	= eukrea_cpuimx27_otg_init,
-	.portsc	= MXC_EHCI_MODE_ULPI,
-};
-
-static int eukrea_cpuimx27_usbh2_init(struct platform_device *pdev)
-{
-	return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
-	.init	= eukrea_cpuimx27_usbh2_init,
-	.portsc	= MXC_EHCI_MODE_ULPI,
-};
-
-static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
-	.operating_mode = FSL_USB2_DR_DEVICE,
-	.phy_mode       = FSL_USB2_PHY_ULPI,
-};
-
-static bool otg_mode_host __initdata;
-
-static int __init eukrea_cpuimx27_otg_mode(char *options)
-{
-	if (!strcmp(options, "host"))
-		otg_mode_host = true;
-	else if (!strcmp(options, "device"))
-		otg_mode_host = false;
-	else
-		pr_info("otg_mode neither \"host\" nor \"device\". "
-			"Defaulting to device\n");
-	return 1;
-}
-__setup("otg_mode=", eukrea_cpuimx27_otg_mode);
-
-static void __init eukrea_cpuimx27_init(void)
-{
-	imx27_soc_init();
-
-	mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins,
-		ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27");
-
-	imx27_add_imx_uart0(&uart_pdata);
-
-	imx27_add_mxc_nand(&cpuimx27_nand_board_info);
-
-	i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
-				ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
-
-	imx27_add_imx_i2c(0, &cpuimx27_i2c1_data);
-
-	imx27_add_fec(NULL);
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-	imx27_add_imx2_wdt();
-	imx27_add_mxc_w1();
-
-#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2)
-	/* SDHC2 can be used for Wifi */
-	imx27_add_mxc_mmc(1, NULL);
-#endif
-#if defined(CONFIG_MACH_EUKREA_CPUIMX27_USEUART4)
-	/* in which case UART4 is also used for Bluetooth */
-	imx27_add_imx_uart3(&uart_pdata);
-#endif
-
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
-	serial_platform_data[0].irq = IMX_GPIO_NR(2, 23);
-	serial_platform_data[1].irq = IMX_GPIO_NR(2, 22);
-	serial_platform_data[2].irq = IMX_GPIO_NR(2, 27);
-	serial_platform_data[3].irq = IMX_GPIO_NR(2, 30);
-	platform_device_register(&serial_device);
-#endif
-
-	if (otg_mode_host) {
-		otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-				ULPI_OTG_DRVVBUS_EXT);
-		if (otg_pdata.otg)
-			imx27_add_mxc_ehci_otg(&otg_pdata);
-	} else {
-		imx27_add_fsl_usb2_udc(&otg_device_pdata);
-	}
-
-	usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
-			ULPI_OTG_DRVVBUS_EXT);
-	if (usbh2_pdata.otg)
-		imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
-
-#ifdef CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD
-	eukrea_mbimx27_baseboard_init();
-#endif
-}
-
-static void __init eukrea_cpuimx27_timer_init(void)
-{
-	mx27_clocks_init(26000000);
-}
-
-MACHINE_START(EUKREA_CPUIMX27, "EUKREA CPUIMX27")
-	.atag_offset = 0x100,
-	.map_io = mx27_map_io,
-	.init_early = imx27_init_early,
-	.init_irq = mx27_init_irq,
-	.init_time	= eukrea_cpuimx27_timer_init,
-	.init_machine = eukrea_cpuimx27_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c
deleted file mode 100644
index 77fda3d..0000000
--- a/arch/arm/mach-imx/mach-mx1ads.c
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * arch/arm/mach-imx/mach-mx1ads.c
- *
- * Initially based on:
- *	linux-2.6.7-imx/arch/arm/mach-imx/scb9328.c
- *	Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- * 2004 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/i2c.h>
-#include <linux/i2c/pcf857x.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "common.h"
-#include "devices-imx1.h"
-#include "hardware.h"
-#include "iomux-mx1.h"
-
-static const int mx1ads_pins[] __initconst = {
-	/* UART1 */
-	PC9_PF_UART1_CTS,
-	PC10_PF_UART1_RTS,
-	PC11_PF_UART1_TXD,
-	PC12_PF_UART1_RXD,
-	/* UART2 */
-	PB28_PF_UART2_CTS,
-	PB29_PF_UART2_RTS,
-	PB30_PF_UART2_TXD,
-	PB31_PF_UART2_RXD,
-	/* I2C */
-	PA15_PF_I2C_SDA,
-	PA16_PF_I2C_SCL,
-	/* SPI */
-	PC13_PF_SPI1_SPI_RDY,
-	PC14_PF_SPI1_SCLK,
-	PC15_PF_SPI1_SS,
-	PC16_PF_SPI1_MISO,
-	PC17_PF_SPI1_MOSI,
-};
-
-/*
- * UARTs platform data
- */
-
-static const struct imxuart_platform_data uart0_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-       
-static const struct imxuart_platform_data uart1_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-/*
- * Physmap flash
- */
-
-static const struct physmap_flash_data mx1ads_flash_data __initconst = {
-	.width		= 4,		/* bankwidth in bytes */
-};
-
-static const struct resource flash_resource __initconst = {
-	.start	= MX1_CS0_PHYS,
-	.end	= MX1_CS0_PHYS + SZ_32M - 1,
-	.flags	= IORESOURCE_MEM,
-};
-
-/*
- * I2C
- */
-static struct pcf857x_platform_data pcf857x_data[] = {
-	{
-		.gpio_base = 4 * 32,
-	}, {
-		.gpio_base = 4 * 32 + 16,
-	}
-};
-
-static const struct imxi2c_platform_data mx1ads_i2c_data __initconst = {
-	.bitrate = 100000,
-};
-
-static struct i2c_board_info mx1ads_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("pcf8575", 0x22),
-		.platform_data = &pcf857x_data[0],
-	}, {
-		I2C_BOARD_INFO("pcf8575", 0x24),
-		.platform_data = &pcf857x_data[1],
-	},
-};
-
-/*
- * Board init
- */
-static void __init mx1ads_init(void)
-{
-	imx1_soc_init();
-
-	mxc_gpio_setup_multiple_pins(mx1ads_pins,
-		ARRAY_SIZE(mx1ads_pins), "mx1ads");
-
-	/* UART */
-	imx1_add_imx_uart0(&uart0_pdata);
-	imx1_add_imx_uart1(&uart1_pdata);
-
-	/* Physmap flash */
-	platform_device_register_resndata(NULL, "physmap-flash", 0,
-			&flash_resource, 1,
-			&mx1ads_flash_data, sizeof(mx1ads_flash_data));
-
-	/* I2C */
-	i2c_register_board_info(0, mx1ads_i2c_devices,
-				ARRAY_SIZE(mx1ads_i2c_devices));
-
-	imx1_add_imx_i2c(&mx1ads_i2c_data);
-}
-
-static void __init mx1ads_timer_init(void)
-{
-	mx1_clocks_init(32000);
-}
-
-MACHINE_START(MX1ADS, "Freescale MX1ADS")
-	/* Maintainer: Sascha Hauer, Pengutronix */
-	.atag_offset = 0x100,
-	.map_io = mx1_map_io,
-	.init_early = imx1_init_early,
-	.init_irq = mx1_init_irq,
-	.init_time	= mx1ads_timer_init,
-	.init_machine = mx1ads_init,
-	.restart	= mxc_restart,
-MACHINE_END
-
-MACHINE_START(MXLADS, "Freescale MXLADS")
-	.atag_offset = 0x100,
-	.map_io = mx1_map_io,
-	.init_early = imx1_init_early,
-	.init_irq = mx1_init_irq,
-	.init_time	= mx1ads_timer_init,
-	.init_machine = mx1ads_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
deleted file mode 100644
index 0b5d1ca..0000000
--- a/arch/arm/mach-imx/mach-mxt_td60.c
+++ /dev/null
@@ -1,273 +0,0 @@
-/*
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *  Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/irq.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/mach/map.h>
-#include <linux/gpio.h>
-#include <linux/platform_data/pca953x.h>
-
-#include "common.h"
-#include "devices-imx27.h"
-#include "hardware.h"
-#include "iomux-mx27.h"
-
-static const int mxt_td60_pins[] __initconst = {
-	/* UART0 */
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	PE14_PF_UART1_CTS,
-	PE15_PF_UART1_RTS,
-	/* UART1 */
-	PE3_PF_UART2_CTS,
-	PE4_PF_UART2_RTS,
-	PE6_PF_UART2_TXD,
-	PE7_PF_UART2_RXD,
-	/* UART2 */
-	PE8_PF_UART3_TXD,
-	PE9_PF_UART3_RXD,
-	PE10_PF_UART3_CTS,
-	PE11_PF_UART3_RTS,
-	/* FEC */
-	PD0_AIN_FEC_TXD0,
-	PD1_AIN_FEC_TXD1,
-	PD2_AIN_FEC_TXD2,
-	PD3_AIN_FEC_TXD3,
-	PD4_AOUT_FEC_RX_ER,
-	PD5_AOUT_FEC_RXD1,
-	PD6_AOUT_FEC_RXD2,
-	PD7_AOUT_FEC_RXD3,
-	PD8_AF_FEC_MDIO,
-	PD9_AIN_FEC_MDC,
-	PD10_AOUT_FEC_CRS,
-	PD11_AOUT_FEC_TX_CLK,
-	PD12_AOUT_FEC_RXD0,
-	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_RX_CLK,
-	PD15_AOUT_FEC_COL,
-	PD16_AIN_FEC_TX_ER,
-	PF23_AIN_FEC_TX_EN,
-	/* I2C1 */
-	PD17_PF_I2C_DATA,
-	PD18_PF_I2C_CLK,
-	/* I2C2 */
-	PC5_PF_I2C2_SDA,
-	PC6_PF_I2C2_SCL,
-	/* FB */
-	PA5_PF_LSCLK,
-	PA6_PF_LD0,
-	PA7_PF_LD1,
-	PA8_PF_LD2,
-	PA9_PF_LD3,
-	PA10_PF_LD4,
-	PA11_PF_LD5,
-	PA12_PF_LD6,
-	PA13_PF_LD7,
-	PA14_PF_LD8,
-	PA15_PF_LD9,
-	PA16_PF_LD10,
-	PA17_PF_LD11,
-	PA18_PF_LD12,
-	PA19_PF_LD13,
-	PA20_PF_LD14,
-	PA21_PF_LD15,
-	PA22_PF_LD16,
-	PA23_PF_LD17,
-	PA25_PF_CLS,
-	PA27_PF_SPL_SPR,
-	PA28_PF_HSYNC,
-	PA29_PF_VSYNC,
-	PA30_PF_CONTRAST,
-	PA31_PF_OE_ACD,
-	/* OWIRE */
-	PE16_AF_OWIRE,
-	/* SDHC1*/
-	PE18_PF_SD1_D0,
-	PE19_PF_SD1_D1,
-	PE20_PF_SD1_D2,
-	PE21_PF_SD1_D3,
-	PE22_PF_SD1_CMD,
-	PE23_PF_SD1_CLK,
-	PF8_AF_ATA_IORDY,
-	/* SDHC2*/
-	PB4_PF_SD2_D0,
-	PB5_PF_SD2_D1,
-	PB6_PF_SD2_D2,
-	PB7_PF_SD2_D3,
-	PB8_PF_SD2_CMD,
-	PB9_PF_SD2_CLK,
-};
-
-static const struct mxc_nand_platform_data
-mxt_td60_nand_board_info __initconst = {
-	.width = 1,
-	.hw_ecc = 1,
-};
-
-static const struct imxi2c_platform_data mxt_td60_i2c0_data __initconst = {
-	.bitrate = 100000,
-};
-
-/* PCA9557 */
-static int mxt_td60_pca9557_setup(struct i2c_client *client,
-				unsigned gpio_base, unsigned ngpio,
-				void *context)
-{
-	static int mxt_td60_gpio_value[] = {
-		-1, -1, -1, -1, -1, -1, -1, 1
-	};
-	int n;
-
-	for (n = 0; n < ARRAY_SIZE(mxt_td60_gpio_value); ++n) {
-		gpio_request(gpio_base + n, "MXT_TD60 GPIO Exp");
-		if (mxt_td60_gpio_value[n] < 0)
-			gpio_direction_input(gpio_base + n);
-		else
-			gpio_direction_output(gpio_base + n,
-						mxt_td60_gpio_value[n]);
-		gpio_export(gpio_base + n, 0);
-	}
-
-	return 0;
-}
-
-static struct pca953x_platform_data mxt_td60_pca9557_pdata = {
-	.gpio_base	= 240, /* place PCA9557 after all MX27 gpio pins */
-	.invert		= 0, /* Do not invert */
-	.setup		= mxt_td60_pca9557_setup,
-};
-
-static struct i2c_board_info mxt_td60_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("pca9557", 0x18),
-		.platform_data = &mxt_td60_pca9557_pdata,
-	},
-};
-
-static const struct imxi2c_platform_data mxt_td60_i2c1_data __initconst = {
-	.bitrate = 100000,
-};
-
-static struct i2c_board_info mxt_td60_i2c2_devices[] = {
-};
-
-static struct imx_fb_videomode mxt_td60_modes[] = {
-	{
-		.mode = {
-			.name		= "Chimei LW700AT9003",
-			.refresh	= 60,
-			.xres		= 800,
-			.yres		= 480,
-			.pixclock	= 30303,
-			.hsync_len	= 64,
-			.left_margin	= 0x67,
-			.right_margin	= 0x68,
-			.vsync_len	= 16,
-			.upper_margin	= 0x0f,
-			.lower_margin	= 0x0f,
-		},
-		.bpp		= 16,
-		.pcr		= 0xFA208B83,
-	},
-};
-
-static const struct imx_fb_platform_data mxt_td60_fb_data __initconst = {
-	.mode = mxt_td60_modes,
-	.num_modes = ARRAY_SIZE(mxt_td60_modes),
-
-	/*
-	 * - HSYNC active high
-	 * - VSYNC active high
-	 * - clk notenabled while idle
-	 * - clock inverted
-	 * - data not inverted
-	 * - data enable low active
-	 * - enable sharp mode
-	 */
-	.pwmr		= 0x00A903FF,
-	.lscr1		= 0x00120300,
-	.dmacr		= 0x00020010,
-};
-
-static int mxt_td60_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
-				void *data)
-{
-	return request_irq(gpio_to_irq(IMX_GPIO_NR(6, 8)), detect_irq,
-			   IRQF_TRIGGER_FALLING, "sdhc1-card-detect", data);
-}
-
-static void mxt_td60_sdhc1_exit(struct device *dev, void *data)
-{
-	free_irq(gpio_to_irq(IMX_GPIO_NR(6, 8)), data);
-}
-
-static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
-	.init = mxt_td60_sdhc1_init,
-	.exit = mxt_td60_sdhc1_exit,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static void __init mxt_td60_board_init(void)
-{
-	imx27_soc_init();
-
-	mxc_gpio_setup_multiple_pins(mxt_td60_pins, ARRAY_SIZE(mxt_td60_pins),
-			"MXT_TD60");
-
-	imx27_add_imx_uart0(&uart_pdata);
-	imx27_add_imx_uart1(&uart_pdata);
-	imx27_add_imx_uart2(&uart_pdata);
-	imx27_add_mxc_nand(&mxt_td60_nand_board_info);
-
-	i2c_register_board_info(0, mxt_td60_i2c_devices,
-				ARRAY_SIZE(mxt_td60_i2c_devices));
-
-	i2c_register_board_info(1, mxt_td60_i2c2_devices,
-				ARRAY_SIZE(mxt_td60_i2c2_devices));
-
-	imx27_add_imx_i2c(0, &mxt_td60_i2c0_data);
-	imx27_add_imx_i2c(1, &mxt_td60_i2c1_data);
-	imx27_add_imx_fb(&mxt_td60_fb_data);
-	imx27_add_mxc_mmc(0, &sdhc1_pdata);
-	imx27_add_fec(NULL);
-}
-
-static void __init mxt_td60_timer_init(void)
-{
-	mx27_clocks_init(26000000);
-}
-
-MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
-	/* maintainer: Maxtrack Industrial */
-	.atag_offset = 0x100,
-	.map_io = mx27_map_io,
-	.init_early = imx27_init_early,
-	.init_irq = mx27_init_irq,
-	.init_time	= mxt_td60_timer_init,
-	.init_machine = mxt_td60_board_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
deleted file mode 100644
index ee862ad..0000000
--- a/arch/arm/mach-imx/mach-pcm038.c
+++ /dev/null
@@ -1,358 +0,0 @@
-/*
- * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/i2c.h>
-#include <linux/platform_data/at24.h>
-#include <linux/io.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/machine.h>
-#include <linux/mfd/mc13783.h>
-#include <linux/spi/spi.h>
-#include <linux/irq.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "board-pcm038.h"
-#include "common.h"
-#include "devices-imx27.h"
-#include "ehci.h"
-#include "hardware.h"
-#include "iomux-mx27.h"
-#include "ulpi.h"
-
-static const int pcm038_pins[] __initconst = {
-	/* UART1 */
-	PE12_PF_UART1_TXD,
-	PE13_PF_UART1_RXD,
-	PE14_PF_UART1_CTS,
-	PE15_PF_UART1_RTS,
-	/* UART2 */
-	PE3_PF_UART2_CTS,
-	PE4_PF_UART2_RTS,
-	PE6_PF_UART2_TXD,
-	PE7_PF_UART2_RXD,
-	/* UART3 */
-	PE8_PF_UART3_TXD,
-	PE9_PF_UART3_RXD,
-	PE10_PF_UART3_CTS,
-	PE11_PF_UART3_RTS,
-	/* FEC */
-	PD0_AIN_FEC_TXD0,
-	PD1_AIN_FEC_TXD1,
-	PD2_AIN_FEC_TXD2,
-	PD3_AIN_FEC_TXD3,
-	PD4_AOUT_FEC_RX_ER,
-	PD5_AOUT_FEC_RXD1,
-	PD6_AOUT_FEC_RXD2,
-	PD7_AOUT_FEC_RXD3,
-	PD8_AF_FEC_MDIO,
-	PD9_AIN_FEC_MDC,
-	PD10_AOUT_FEC_CRS,
-	PD11_AOUT_FEC_TX_CLK,
-	PD12_AOUT_FEC_RXD0,
-	PD13_AOUT_FEC_RX_DV,
-	PD14_AOUT_FEC_RX_CLK,
-	PD15_AOUT_FEC_COL,
-	PD16_AIN_FEC_TX_ER,
-	PF23_AIN_FEC_TX_EN,
-	/* I2C2 */
-	PC5_PF_I2C2_SDA,
-	PC6_PF_I2C2_SCL,
-	/* SPI1 */
-	PD25_PF_CSPI1_RDY,
-	PD29_PF_CSPI1_SCLK,
-	PD30_PF_CSPI1_MISO,
-	PD31_PF_CSPI1_MOSI,
-	/* SSI1 */
-	PC20_PF_SSI1_FS,
-	PC21_PF_SSI1_RXD,
-	PC22_PF_SSI1_TXD,
-	PC23_PF_SSI1_CLK,
-	/* SSI4 */
-	PC16_PF_SSI4_FS,
-	PC17_PF_SSI4_RXD,
-	PC18_PF_SSI4_TXD,
-	PC19_PF_SSI4_CLK,
-	/* USB host */
-	PA0_PF_USBH2_CLK,
-	PA1_PF_USBH2_DIR,
-	PA2_PF_USBH2_DATA7,
-	PA3_PF_USBH2_NXT,
-	PA4_PF_USBH2_STP,
-	PD19_AF_USBH2_DATA4,
-	PD20_AF_USBH2_DATA3,
-	PD21_AF_USBH2_DATA6,
-	PD22_AF_USBH2_DATA0,
-	PD23_AF_USBH2_DATA2,
-	PD24_AF_USBH2_DATA1,
-	PD26_AF_USBH2_DATA5,
-};
-
-/*
- * Phytec's PCM038 comes with 2MiB battery buffered SRAM,
- * 16 bit width
- */
-
-static struct platdata_mtd_ram pcm038_sram_data = {
-	.bankwidth = 2,
-};
-
-static struct resource pcm038_sram_resource = {
-	.start = MX27_CS1_BASE_ADDR,
-	.end   = MX27_CS1_BASE_ADDR + 512 * 1024 - 1,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platform_device pcm038_sram_mtd_device = {
-	.name = "mtd-ram",
-	.id = 0,
-	.dev = {
-		.platform_data = &pcm038_sram_data,
-	},
-	.num_resources = 1,
-	.resource = &pcm038_sram_resource,
-};
-
-/*
- * Phytec's phyCORE-i.MX27 comes with 32MiB flash,
- * 16 bit width
- */
-static struct physmap_flash_data pcm038_flash_data = {
-	.width = 2,
-};
-
-static struct resource pcm038_flash_resource = {
-	.start = 0xc0000000,
-	.end   = 0xc1ffffff,
-	.flags = IORESOURCE_MEM,
-};
-
-static struct platform_device pcm038_nor_mtd_device = {
-	.name = "physmap-flash",
-	.id = 0,
-	.dev = {
-		.platform_data = &pcm038_flash_data,
-	},
-	.num_resources = 1,
-	.resource = &pcm038_flash_resource,
-};
-
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct mxc_nand_platform_data
-pcm038_nand_board_info __initconst = {
-	.width = 1,
-	.hw_ecc = 1,
-};
-
-static struct platform_device *platform_devices[] __initdata = {
-	&pcm038_nor_mtd_device,
-	&pcm038_sram_mtd_device,
-};
-
-/* On pcm038 there's a sram attached to CS1, we enable the chipselect here and
- * setup other stuffs to access the sram. */
-static void __init pcm038_init_sram(void)
-{
-	__raw_writel(0x0000d843, MX27_IO_ADDRESS(MX27_WEIM_CSCRxU(1)));
-	__raw_writel(0x22252521, MX27_IO_ADDRESS(MX27_WEIM_CSCRxL(1)));
-	__raw_writel(0x22220a00, MX27_IO_ADDRESS(MX27_WEIM_CSCRxA(1)));
-}
-
-static const struct imxi2c_platform_data pcm038_i2c1_data __initconst = {
-	.bitrate = 100000,
-};
-
-static struct at24_platform_data board_eeprom = {
-	.byte_len = 4096,
-	.page_size = 32,
-	.flags = AT24_FLAG_ADDR16,
-};
-
-static struct i2c_board_info pcm038_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
-		.platform_data = &board_eeprom,
-	}, {
-		I2C_BOARD_INFO("pcf8563", 0x51),
-	}, {
-		I2C_BOARD_INFO("lm75", 0x4a),
-	}
-};
-
-static int pcm038_spi_cs[] = {GPIO_PORTD + 28};
-
-static const struct spi_imx_master pcm038_spi0_data __initconst = {
-	.chipselect = pcm038_spi_cs,
-	.num_chipselect = ARRAY_SIZE(pcm038_spi_cs),
-};
-
-static struct regulator_consumer_supply sdhc1_consumers[] = {
-	{
-		.dev_name = "imx21-mmc.1",
-		.supply	= "sdhc_vcc",
-	},
-};
-
-static struct regulator_init_data sdhc1_data = {
-	.constraints = {
-		.min_uV = 3000000,
-		.max_uV = 3400000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
-		.valid_modes_mask = REGULATOR_MODE_NORMAL |
-			REGULATOR_MODE_FAST,
-		.always_on = 0,
-		.boot_on = 0,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(sdhc1_consumers),
-	.consumer_supplies = sdhc1_consumers,
-};
-
-static struct regulator_consumer_supply cam_consumers[] = {
-	{
-		.dev_name = NULL,
-		.supply	= "imx_cam_vcc",
-	},
-};
-
-static struct regulator_init_data cam_data = {
-	.constraints = {
-		.min_uV = 3000000,
-		.max_uV = 3400000,
-		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
-		.valid_modes_mask = REGULATOR_MODE_NORMAL |
-			REGULATOR_MODE_FAST,
-		.always_on = 0,
-		.boot_on = 0,
-	},
-	.num_consumer_supplies = ARRAY_SIZE(cam_consumers),
-	.consumer_supplies = cam_consumers,
-};
-
-static struct mc13xxx_regulator_init_data pcm038_regulators[] = {
-	{
-		.id = MC13783_REG_VCAM,
-		.init_data = &cam_data,
-	}, {
-		.id = MC13783_REG_VMMC1,
-		.init_data = &sdhc1_data,
-	},
-};
-
-static struct mc13xxx_platform_data pcm038_pmic = {
-	.regulators = {
-		.regulators = pcm038_regulators,
-		.num_regulators = ARRAY_SIZE(pcm038_regulators),
-	},
-	.flags = MC13XXX_USE_ADC | MC13XXX_USE_TOUCHSCREEN,
-};
-
-static struct spi_board_info pcm038_spi_board_info[] __initdata = {
-	{
-		.modalias = "mc13783",
-		/* irq number is run-time assigned */
-		.max_speed_hz = 300000,
-		.bus_num = 0,
-		.chip_select = 0,
-		.platform_data = &pcm038_pmic,
-		.mode = SPI_CS_HIGH,
-	}
-};
-
-static int pcm038_usbh2_init(struct platform_device *pdev)
-{
-	return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED |
-			MXC_EHCI_INTERFACE_DIFF_UNI);
-}
-
-static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
-	.init	= pcm038_usbh2_init,
-	.portsc	= MXC_EHCI_MODE_ULPI,
-};
-
-static void __init pcm038_init(void)
-{
-	imx27_soc_init();
-
-	mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins),
-			"PCM038");
-
-	pcm038_init_sram();
-
-	imx27_add_imx_uart0(&uart_pdata);
-	imx27_add_imx_uart1(&uart_pdata);
-	imx27_add_imx_uart2(&uart_pdata);
-
-	mxc_gpio_mode(PE16_AF_OWIRE);
-	imx27_add_mxc_nand(&pcm038_nand_board_info);
-
-	/* only the i2c master 1 is used on this CPU card */
-	i2c_register_board_info(1, pcm038_i2c_devices,
-				ARRAY_SIZE(pcm038_i2c_devices));
-
-	imx27_add_imx_i2c(1, &pcm038_i2c1_data);
-
-	/* PE18 for user-LED D40 */
-	mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT);
-
-	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
-
-	/* MC13783 IRQ */
-	mxc_gpio_mode(GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN);
-
-	imx27_add_spi_imx0(&pcm038_spi0_data);
-	pcm038_spi_board_info[0].irq = gpio_to_irq(IMX_GPIO_NR(2, 23));
-	spi_register_board_info(pcm038_spi_board_info,
-				ARRAY_SIZE(pcm038_spi_board_info));
-
-	imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
-
-	imx27_add_fec(NULL);
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-	imx27_add_imx2_wdt();
-	imx27_add_mxc_w1();
-
-#ifdef CONFIG_MACH_PCM970_BASEBOARD
-	pcm970_baseboard_init();
-#endif
-}
-
-static void __init pcm038_timer_init(void)
-{
-	mx27_clocks_init(26000000);
-}
-
-MACHINE_START(PCM038, "phyCORE-i.MX27")
-	.atag_offset = 0x100,
-	.map_io = mx27_map_io,
-	.init_early = imx27_init_early,
-	.init_irq = mx27_init_irq,
-	.init_time	= pcm038_timer_init,
-	.init_machine = pcm038_init,
-	.restart	= mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/pcm970-baseboard.c b/arch/arm/mach-imx/pcm970-baseboard.c
deleted file mode 100644
index 51c6082..0000000
--- a/arch/arm/mach-imx/pcm970-baseboard.c
+++ /dev/null
@@ -1,231 +0,0 @@
-/*
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/gpio.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/can/platform/sja1000.h>
-
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "devices-imx27.h"
-#include "hardware.h"
-#include "iomux-mx27.h"
-
-static const int pcm970_pins[] __initconst = {
-	/* SDHC */
-	PB4_PF_SD2_D0,
-	PB5_PF_SD2_D1,
-	PB6_PF_SD2_D2,
-	PB7_PF_SD2_D3,
-	PB8_PF_SD2_CMD,
-	PB9_PF_SD2_CLK,
-	/* display */
-	PA5_PF_LSCLK,
-	PA6_PF_LD0,
-	PA7_PF_LD1,
-	PA8_PF_LD2,
-	PA9_PF_LD3,
-	PA10_PF_LD4,
-	PA11_PF_LD5,
-	PA12_PF_LD6,
-	PA13_PF_LD7,
-	PA14_PF_LD8,
-	PA15_PF_LD9,
-	PA16_PF_LD10,
-	PA17_PF_LD11,
-	PA18_PF_LD12,
-	PA19_PF_LD13,
-	PA20_PF_LD14,
-	PA21_PF_LD15,
-	PA22_PF_LD16,
-	PA23_PF_LD17,
-	PA24_PF_REV,
-	PA25_PF_CLS,
-	PA26_PF_PS,
-	PA27_PF_SPL_SPR,
-	PA28_PF_HSYNC,
-	PA29_PF_VSYNC,
-	PA30_PF_CONTRAST,
-	PA31_PF_OE_ACD,
-	/*
-	 * it seems the data line misses a pullup, so we must enable
-	 * the internal pullup as a local workaround
-	 */
-	PD17_PF_I2C_DATA | GPIO_PUEN,
-	PD18_PF_I2C_CLK,
-	/* Camera */
-	PB10_PF_CSI_D0,
-	PB11_PF_CSI_D1,
-	PB12_PF_CSI_D2,
-	PB13_PF_CSI_D3,
-	PB14_PF_CSI_D4,
-	PB15_PF_CSI_MCLK,
-	PB16_PF_CSI_PIXCLK,
-	PB17_PF_CSI_D5,
-	PB18_PF_CSI_D6,
-	PB19_PF_CSI_D7,
-	PB20_PF_CSI_VSYNC,
-	PB21_PF_CSI_HSYNC,
-};
-
-static int pcm970_sdhc2_get_ro(struct device *dev)
-{
-	return gpio_get_value(GPIO_PORTC + 28);
-}
-
-static int pcm970_sdhc2_init(struct device *dev, irq_handler_t detect_irq, void *data)
-{
-	int ret;
-
-	ret = request_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), detect_irq,
-			  IRQF_TRIGGER_FALLING, "imx-mmc-detect", data);
-	if (ret)
-		return ret;
-
-	ret = gpio_request(GPIO_PORTC + 28, "imx-mmc-ro");
-	if (ret) {
-		free_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), data);
-		return ret;
-	}
-
-	gpio_direction_input(GPIO_PORTC + 28);
-
-	return 0;
-}
-
-static void pcm970_sdhc2_exit(struct device *dev, void *data)
-{
-	free_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), data);
-	gpio_free(GPIO_PORTC + 28);
-}
-
-static const struct imxmmc_platform_data sdhc_pdata __initconst = {
-	.get_ro = pcm970_sdhc2_get_ro,
-	.init = pcm970_sdhc2_init,
-	.exit = pcm970_sdhc2_exit,
-};
-
-static struct imx_fb_videomode pcm970_modes[] = {
-	{
-		.mode = {
-			.name		= "Sharp-LQ035Q7",
-			.refresh	= 60,
-			.xres		= 240,
-			.yres		= 320,
-			.pixclock	= 188679, /* in ps (5.3MHz) */
-			.hsync_len	= 7,
-			.left_margin	= 5,
-			.right_margin	= 16,
-			.vsync_len	= 1,
-			.upper_margin	= 7,
-			.lower_margin	= 9,
-		},
-		/*
-		 * - HSYNC active high
-		 * - VSYNC active high
-		 * - clk notenabled while idle
-		 * - clock not inverted
-		 * - data not inverted
-		 * - data enable low active
-		 * - enable sharp mode
-		 */
-		.pcr		= 0xF00080C0,
-		.bpp		= 16,
-	}, {
-		.mode = {
-			.name		= "TX090",
-			.refresh	= 60,
-			.xres		= 240,
-			.yres		= 320,
-			.pixclock	= 38255,
-			.left_margin	= 144,
-			.right_margin	= 0,
-			.upper_margin	= 7,
-			.lower_margin	= 40,
-			.hsync_len	= 96,
-			.vsync_len	= 1,
-		},
-		/*
-		 * - HSYNC active low (1 << 22)
-		 * - VSYNC active low (1 << 23)
-		 * - clk notenabled while idle
-		 * - clock not inverted
-		 * - data not inverted
-		 * - data enable low active
-		 * - enable sharp mode
-		 */
-		.pcr = 0xF0008080 | (1<<22) | (1<<23) | (1<<19),
-		.bpp = 32,
-	},
-};
-
-static const struct imx_fb_platform_data pcm038_fb_data __initconst = {
-	.mode = pcm970_modes,
-	.num_modes = ARRAY_SIZE(pcm970_modes),
-
-	.pwmr		= 0x00A903FF,
-	.lscr1		= 0x00120300,
-	.dmacr		= 0x00020010,
-};
-
-static struct resource pcm970_sja1000_resources[] = {
-	{
-		.start   = MX27_CS4_BASE_ADDR,
-		.end     = MX27_CS4_BASE_ADDR + 0x100 - 1,
-		.flags   = IORESOURCE_MEM,
-	}, {
-		/* irq number is run-time assigned */
-		.flags   = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
-	},
-};
-
-static struct sja1000_platform_data pcm970_sja1000_platform_data = {
-	.osc_freq	= 16000000,
-	.ocr		= OCR_TX1_PULLDOWN | OCR_TX0_PUSHPULL,
-	.cdr		= CDR_CBP,
-};
-
-static struct platform_device pcm970_sja1000 = {
-	.name = "sja1000_platform",
-	.dev = {
-		.platform_data = &pcm970_sja1000_platform_data,
-	},
-	.resource = pcm970_sja1000_resources,
-	.num_resources = ARRAY_SIZE(pcm970_sja1000_resources),
-};
-
-/*
- * system init for baseboard usage. Will be called by pcm038 init.
- *
- * Add platform devices present on this baseboard and init
- * them from CPU side as far as required to use them later on
- */
-void __init pcm970_baseboard_init(void)
-{
-	mxc_gpio_setup_multiple_pins(pcm970_pins, ARRAY_SIZE(pcm970_pins),
-			"PCM970");
-
-	imx27_add_imx_fb(&pcm038_fb_data);
-	mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN);
-	imx27_add_mxc_mmc(1, &sdhc_pdata);
-	pcm970_sja1000_resources[1].start = gpio_to_irq(IMX_GPIO_NR(5, 19));
-	pcm970_sja1000_resources[1].end = gpio_to_irq(IMX_GPIO_NR(5, 19));
-	platform_device_register(&pcm970_sja1000);
-}
diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c
index 5b57c17..771bd25 100644
--- a/arch/arm/mach-imx/platsmp.c
+++ b/arch/arm/mach-imx/platsmp.c
@@ -20,8 +20,6 @@
 #include "common.h"
 #include "hardware.h"
 
-#define SCU_STANDBY_ENABLE	(1 << 5)
-
 u32 g_diag_reg;
 static void __iomem *scu_base;
 
@@ -45,14 +43,6 @@ void __init imx_scu_map_io(void)
 	scu_base = IMX_IO_ADDRESS(base);
 }
 
-void imx_scu_standby_enable(void)
-{
-	u32 val = readl_relaxed(scu_base);
-
-	val |= SCU_STANDBY_ENABLE;
-	writel_relaxed(val, scu_base);
-}
-
 static int imx_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	imx_set_cpu_jump(cpu, v7_secondary_startup);