diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2016-10-07 21:16:16 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2016-10-07 21:16:16 -0700 |
commit | a771151a8323a5ca81f443a9a439851b8a872c85 (patch) | |
tree | e1cd1a77beae03bb03ec238c227ae26199998dc7 /arch/arm/mach-imx | |
parent | 997b611baf7591ea5119539ee821a3e2f4fcf24e (diff) | |
parent | e13688fe618881dd407a68dfbd2295d70b21a445 (diff) | |
download | op-kernel-dev-a771151a8323a5ca81f443a9a439851b8a872c85.zip op-kernel-dev-a771151a8323a5ca81f443a9a439851b8a872c85.tar.gz |
Merge tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC cleanups from Arnd Bergmann:
"The cleanups for v4.9 are a little larger that usual, but thankfully
that is almost exclusively due to removing a significant number of
files that have become obsolete after the still ongoing conversion of
old board files to devicetree.
- for mach-omap2, which is still the largest platform in arch/arm/,
the conversion to DT is finally complete after the Nokia N900 is
now fully supported there, along with the omap3 LDP, and we can
remove those two board files. If no regressions are found, another
large cleanup for the platform will happen as a follow-up, removing
dead code and restructuring the platform based on being DT-only.
- In mach-imx, similar work is ongoing, but has not come that far.
This time, we remove the obsolete board file for the i.MX1
generation, which like i.MX25, i.MX5, i.MX6, and i.MX7 is now
DT-only. The remaining board files are for i.MX2 and i.MX3 machines
based on old ARM926 or ARM1136 cores that should work with DT in
principle.
- realview has just been converted from board files to DT, and a lot
of code gets removed in the process. This is the last
ARM/Keil/Versatile derived platform that was still using board
files, the other ones being integrator, versatile and vexpress. We
can probably merge the remaining code into a single directory in
the near future.
- clps711x had completed the conversion in v4.8, but we accidentally
left the files in place that should have been deleted then"
* tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits)
ARM: select PCI_DOMAINS config from ARCH_MULTIPLATFORM
ARM: stop *MIGHT_HAVE_PCI* config from being selected redundantly
ARM: imx: (trivial) fix typo and grammar
ARM: clps711x: remove extraneous files
ARM: imx: use IS_ENABLED() instead of checking for built-in or module
ARM: OMAP2+: use IS_ENABLED() instead of checking for built-in or module
ARM: OMAP1: use IS_ENABLED() instead of checking for built-in or module
ARM: imx: remove platform-mxc_rnga
ARM: realview: imply device tree boot
ARM: realview: no need to select SMP_ON_UP explicitly
ARM: realview: delete the RealView board files
ARM: imx: no need to select SMP_ON_UP explicitly
ARM: i.MX: Move SOC_IMX1 into 'Device tree only'
ARM: i.MX: Remove i.MX1 non-DT support
ARM: i.MX: Remove i.MX1 Synertronixx SCB9328 board support
ARM: i.MX: Remove i.MX1 Armadeus APF9328 board support
ARM: mxs: remove obsolete startup code for TX28
ARM: i.MX31 iomux: remove duplicates with alternate name
ARM: i.MX31 iomux: remove plain duplicates
ARM: OMAP2+: Drop legacy board file for LDP
...
Diffstat (limited to 'arch/arm/mach-imx')
-rw-r--r-- | arch/arm/mach-imx/Kconfig | 52 | ||||
-rw-r--r-- | arch/arm/mach-imx/Makefile | 7 | ||||
-rw-r--r-- | arch/arm/mach-imx/common.h | 5 | ||||
-rw-r--r-- | arch/arm/mach-imx/devices-imx1.h | 30 | ||||
-rw-r--r-- | arch/arm/mach-imx/devices/Makefile | 1 | ||||
-rw-r--r-- | arch/arm/mach-imx/devices/devices-common.h | 12 | ||||
-rw-r--r-- | arch/arm/mach-imx/devices/platform-imx-fb.c | 5 | ||||
-rw-r--r-- | arch/arm/mach-imx/devices/platform-imx-i2c.c | 5 | ||||
-rw-r--r-- | arch/arm/mach-imx/devices/platform-imx-uart.c | 37 | ||||
-rw-r--r-- | arch/arm/mach-imx/devices/platform-spi_imx.c | 9 | ||||
-rw-r--r-- | arch/arm/mach-imx/hardware.h | 3 | ||||
-rw-r--r-- | arch/arm/mach-imx/iomux-mx1.h | 155 | ||||
-rw-r--r-- | arch/arm/mach-imx/iomux-mx3.h | 34 | ||||
-rw-r--r-- | arch/arm/mach-imx/mach-apf9328.c | 148 | ||||
-rw-r--r-- | arch/arm/mach-imx/mach-imx1.c (renamed from arch/arm/mach-imx/imx1-dt.c) | 23 | ||||
-rw-r--r-- | arch/arm/mach-imx/mach-kzm_arm11_01.c | 6 | ||||
-rw-r--r-- | arch/arm/mach-imx/mach-pcm037.c | 2 | ||||
-rw-r--r-- | arch/arm/mach-imx/mach-scb9328.c | 143 | ||||
-rw-r--r-- | arch/arm/mach-imx/mm-imx1.c | 67 | ||||
-rw-r--r-- | arch/arm/mach-imx/mx1.h | 172 |
20 files changed, 39 insertions, 877 deletions
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index ee9a318..9155b63 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -64,13 +64,6 @@ config IMX_HAVE_IOMUX_V1 config ARCH_MXC_IOMUX_V3 bool -config SOC_IMX1 - bool - select CPU_ARM920T - select IMX_HAVE_IOMUX_V1 - select MXC_AVIC - select PINCTRL_IMX1 - config SOC_IMX21 bool select CPU_ARM926T @@ -88,7 +81,6 @@ config SOC_IMX31 bool select CPU_V6 select MXC_AVIC - select SMP_ON_UP if SMP config SOC_IMX35 bool @@ -96,35 +88,6 @@ config SOC_IMX35 select HAVE_EPIT select MXC_AVIC select PINCTRL_IMX35 - select SMP_ON_UP if SMP - -if ARCH_MULTI_V4T - -comment "MX1 platforms:" - -config MACH_SCB9328 - bool "Synertronixx scb9328" - select IMX_HAVE_PLATFORM_IMX_UART - select SOC_IMX1 - help - Say Y here if you are using a Synertronixx scb9328 board - -config MACH_APF9328 - bool "APF9328" - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select SOC_IMX1 - help - Say Yes here if you are using the Armadeus APF9328 development board - -config MACH_IMX1_DT - bool "Support i.MX1 platforms from device tree" - select SOC_IMX1 - help - Include support for Freescale i.MX1 based platforms - using the device tree for discovery. - -endif if ARCH_MULTI_V5 @@ -461,6 +424,18 @@ endif comment "Device tree only" +if ARCH_MULTI_V4T + +config SOC_IMX1 + bool "i.MX1 support" + select CPU_ARM920T + select MXC_AVIC + select PINCTRL_IMX1 + help + This enables support for Freescale i.MX1 processor + +endif + if ARCH_MULTI_V5 config SOC_IMX25 @@ -523,7 +498,6 @@ config SOC_IMX6Q select ARM_ERRATA_764369 if SMP select HAVE_ARM_SCU if SMP select HAVE_ARM_TWD - select PCI_DOMAINS if PCI select PINCTRL_IMX6Q select SOC_IMX6 @@ -569,7 +543,6 @@ config SOC_LS1021A bool "Freescale LS1021A support" select ARM_GIC select HAVE_ARM_ARCH_TIMER - select PCI_DOMAINS if PCI select ZONE_DMA if ARM_LPAE help This enables support for Freescale LS1021A processor. @@ -585,7 +558,6 @@ config SOC_VF610 select ARM_GIC if ARCH_MULTI_V7 select PINCTRL_VF610 select PL310_ERRATA_769419 if CACHE_L2X0 - select SMP_ON_UP if SMP help This enables support for Freescale Vybrid VF610 processor. diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 9f5fffd..2636adf 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -1,6 +1,5 @@ obj-y := cpu.o system.o irq-common.o -obj-$(CONFIG_SOC_IMX1) += mm-imx1.o obj-$(CONFIG_SOC_IMX21) += mm-imx21.o obj-$(CONFIG_SOC_IMX25) += cpu-imx25.o mach-imx25.o pm-imx25.o @@ -35,11 +34,6 @@ obj-y += ssi-fiq.o obj-y += ssi-fiq-ksym.o endif -# i.MX1 based machines -obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o -obj-$(CONFIG_MACH_APF9328) += mach-apf9328.o -obj-$(CONFIG_MACH_IMX1_DT) += imx1-dt.o - # i.MX21 based machines obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o @@ -93,6 +87,7 @@ obj-$(CONFIG_SOC_IMX53) += suspend-imx53.o endif obj-$(CONFIG_SOC_IMX6) += pm-imx6.o +obj-$(CONFIG_SOC_IMX1) += mach-imx1.o obj-$(CONFIG_SOC_IMX50) += mach-imx50.o obj-$(CONFIG_SOC_IMX51) += mach-imx51.o obj-$(CONFIG_SOC_IMX53) += mach-imx53.o diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index a8f4693..bcca481 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -21,29 +21,24 @@ struct device_node; enum mxc_cpu_pwr_mode; struct of_device_id; -void mx1_map_io(void); void mx21_map_io(void); void mx27_map_io(void); void mx31_map_io(void); void mx35_map_io(void); -void imx1_init_early(void); void imx21_init_early(void); void imx27_init_early(void); void imx31_init_early(void); void imx35_init_early(void); void mxc_init_irq(void __iomem *); -void mx1_init_irq(void); void mx21_init_irq(void); void mx27_init_irq(void); void mx31_init_irq(void); void mx35_init_irq(void); -void imx1_soc_init(void); void imx21_soc_init(void); void imx27_soc_init(void); void imx31_soc_init(void); void imx35_soc_init(void); void epit_timer_init(void __iomem *base, int irq); -int mx1_clocks_init(unsigned long fref); int mx21_clocks_init(unsigned long lref, unsigned long fref); int mx27_clocks_init(unsigned long fref); int mx31_clocks_init(unsigned long fref); diff --git a/arch/arm/mach-imx/devices-imx1.h b/arch/arm/mach-imx/devices-imx1.h deleted file mode 100644 index f9b5afc..0000000 --- a/arch/arm/mach-imx/devices-imx1.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * Copyright (C) 2010 Pengutronix - * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de> - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ -#include "devices/devices-common.h" - -extern const struct imx_imx_fb_data imx1_imx_fb_data; -#define imx1_add_imx_fb(pdata) \ - imx_add_imx_fb(&imx1_imx_fb_data, pdata) - -extern const struct imx_imx_i2c_data imx1_imx_i2c_data; -#define imx1_add_imx_i2c(pdata) \ - imx_add_imx_i2c(&imx1_imx_i2c_data, pdata) - -extern const struct imx_imx_uart_3irq_data imx1_imx_uart_data[]; -#define imx1_add_imx_uart(id, pdata) \ - imx_add_imx_uart_3irq(&imx1_imx_uart_data[id], pdata) -#define imx1_add_imx_uart0(pdata) imx1_add_imx_uart(0, pdata) -#define imx1_add_imx_uart1(pdata) imx1_add_imx_uart(1, pdata) - -extern const struct imx_spi_imx_data imx1_cspi_data[]; -#define imx1_add_cspi(id, pdata) \ - imx_add_spi_imx(&imx1_cspi_data[id], pdata) - -#define imx1_add_spi_imx0(pdata) imx1_add_cspi(0, pdata) -#define imx1_add_spi_imx1(pdata) imx1_add_cspi(1, pdata) diff --git a/arch/arm/mach-imx/devices/Makefile b/arch/arm/mach-imx/devices/Makefile index e5cf587..aa6cee8 100644 --- a/arch/arm/mach-imx/devices/Makefile +++ b/arch/arm/mach-imx/devices/Makefile @@ -20,7 +20,6 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_MX2_CAMERA) += platform-mx2-camera.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_EHCI) += platform-mxc-ehci.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_MMC) += platform-mxc-mmc.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_NAND) += platform-mxc_nand.o -obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RNGA) += platform-mxc_rnga.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RTC) += platform-mxc_rtc.o obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h index 09cebd8..6920e35 100644 --- a/arch/arm/mach-imx/devices/devices-common.h +++ b/arch/arm/mach-imx/devices/devices-common.h @@ -154,18 +154,6 @@ struct platform_device *__init imx_add_imx_ssi( const struct imx_ssi_platform_data *pdata); #include <linux/platform_data/serial-imx.h> -struct imx_imx_uart_3irq_data { - int id; - resource_size_t iobase; - resource_size_t iosize; - resource_size_t irqrx; - resource_size_t irqtx; - resource_size_t irqrts; -}; -struct platform_device *__init imx_add_imx_uart_3irq( - const struct imx_imx_uart_3irq_data *data, - const struct imxuart_platform_data *pdata); - struct imx_imx_uart_1irq_data { int id; resource_size_t iobase; diff --git a/arch/arm/mach-imx/devices/platform-imx-fb.c b/arch/arm/mach-imx/devices/platform-imx-fb.c index 7df6328..aa00272 100644 --- a/arch/arm/mach-imx/devices/platform-imx-fb.c +++ b/arch/arm/mach-imx/devices/platform-imx-fb.c @@ -19,11 +19,6 @@ .irq = soc ## _INT_LCDC, \ } -#ifdef CONFIG_SOC_IMX1 -const struct imx_imx_fb_data imx1_imx_fb_data __initconst = - imx_imx_fb_data_entry_single(MX1, "imx1-fb", SZ_4K); -#endif /* ifdef CONFIG_SOC_IMX1 */ - #ifdef CONFIG_SOC_IMX21 const struct imx_imx_fb_data imx21_imx_fb_data __initconst = imx_imx_fb_data_entry_single(MX21, "imx21-fb", SZ_4K); diff --git a/arch/arm/mach-imx/devices/platform-imx-i2c.c b/arch/arm/mach-imx/devices/platform-imx-i2c.c index ae97915..9822bed 100644 --- a/arch/arm/mach-imx/devices/platform-imx-i2c.c +++ b/arch/arm/mach-imx/devices/platform-imx-i2c.c @@ -21,11 +21,6 @@ #define imx_imx_i2c_data_entry(soc, _devid, _id, _hwid, _size) \ [_id] = imx_imx_i2c_data_entry_single(soc, _devid, _id, _hwid, _size) -#ifdef CONFIG_SOC_IMX1 -const struct imx_imx_i2c_data imx1_imx_i2c_data __initconst = - imx_imx_i2c_data_entry_single(MX1, "imx1-i2c", 0, , SZ_4K); -#endif /* ifdef CONFIG_SOC_IMX1 */ - #ifdef CONFIG_SOC_IMX21 const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst = imx_imx_i2c_data_entry_single(MX21, "imx21-i2c", 0, , SZ_4K); diff --git a/arch/arm/mach-imx/devices/platform-imx-uart.c b/arch/arm/mach-imx/devices/platform-imx-uart.c index 6962cff..e3c89e9 100644 --- a/arch/arm/mach-imx/devices/platform-imx-uart.c +++ b/arch/arm/mach-imx/devices/platform-imx-uart.c @@ -27,15 +27,6 @@ .irq = soc ## _INT_UART ## _hwid, \ } -#ifdef CONFIG_SOC_IMX1 -const struct imx_imx_uart_3irq_data imx1_imx_uart_data[] __initconst = { -#define imx1_imx_uart_data_entry(_id, _hwid) \ - imx_imx_uart_3irq_data_entry(MX1, _id, _hwid, 0xd0) - imx1_imx_uart_data_entry(0, 1), - imx1_imx_uart_data_entry(1, 2), -}; -#endif /* ifdef CONFIG_SOC_IMX1 */ - #ifdef CONFIG_SOC_IMX21 const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst = { #define imx21_imx_uart_data_entry(_id, _hwid) \ @@ -82,34 +73,6 @@ const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst = { }; #endif /* ifdef CONFIG_SOC_IMX35 */ -struct platform_device *__init imx_add_imx_uart_3irq( - const struct imx_imx_uart_3irq_data *data, - const struct imxuart_platform_data *pdata) -{ - struct resource res[] = { - { - .start = data->iobase, - .end = data->iobase + data->iosize - 1, - .flags = IORESOURCE_MEM, - }, { - .start = data->irqrx, - .end = data->irqrx, - .flags = IORESOURCE_IRQ, - }, { - .start = data->irqtx, - .end = data->irqtx, - .flags = IORESOURCE_IRQ, - }, { - .start = data->irqrts, - .end = data->irqrx, - .flags = IORESOURCE_IRQ, - }, - }; - - return imx_add_platform_device("imx1-uart", data->id, res, - ARRAY_SIZE(res), pdata, sizeof(*pdata)); -} - struct platform_device *__init imx_add_imx_uart_1irq( const struct imx_imx_uart_1irq_data *data, const struct imxuart_platform_data *pdata) diff --git a/arch/arm/mach-imx/devices/platform-spi_imx.c b/arch/arm/mach-imx/devices/platform-spi_imx.c index 5e9707b..d93c446 100644 --- a/arch/arm/mach-imx/devices/platform-spi_imx.c +++ b/arch/arm/mach-imx/devices/platform-spi_imx.c @@ -21,15 +21,6 @@ #define imx_spi_imx_data_entry(soc, type, devid, id, hwid, size) \ [id] = imx_spi_imx_data_entry_single(soc, type, devid, id, hwid, size) -#ifdef CONFIG_SOC_IMX1 -const struct imx_spi_imx_data imx1_cspi_data[] __initconst = { -#define imx1_cspi_data_entry(_id, _hwid) \ - imx_spi_imx_data_entry(MX1, CSPI, "imx1-cspi", _id, _hwid, SZ_4K) - imx1_cspi_data_entry(0, 1), - imx1_cspi_data_entry(1, 2), -}; -#endif - #ifdef CONFIG_SOC_IMX21 const struct imx_spi_imx_data imx21_cspi_data[] __initconst = { #define imx21_cspi_data_entry(_id, _hwid) \ diff --git a/arch/arm/mach-imx/hardware.h b/arch/arm/mach-imx/hardware.h index d737f95..90e10cb 100644 --- a/arch/arm/mach-imx/hardware.h +++ b/arch/arm/mach-imx/hardware.h @@ -112,7 +112,6 @@ #include "mx2x.h" #include "mx21.h" #include "mx27.h" -#include "mx1.h" #define imx_map_entry(soc, name, _type) { \ .virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR), \ @@ -121,7 +120,7 @@ .type = _type, \ } -/* There's a off-by-one betweem the gpio bank number and the gpiochip */ +/* There's an off-by-one between the gpio bank number and the gpiochip */ /* range e.g. GPIO_1_5 is gpio 5 under linux */ #define IMX_GPIO_NR(bank, nr) (((bank) - 1) * 32 + (nr)) diff --git a/arch/arm/mach-imx/iomux-mx1.h b/arch/arm/mach-imx/iomux-mx1.h deleted file mode 100644 index 95f4681..0000000 --- a/arch/arm/mach-imx/iomux-mx1.h +++ /dev/null @@ -1,155 +0,0 @@ -/* - * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ -#ifndef __MACH_IOMUX_MX1_H__ -#define __MACH_IOMUX_MX1_H__ - -#include "iomux-v1.h" - -#define PA0_AIN_SPI2_CLK (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 0) -#define PA0_AF_ETMTRACESYNC (GPIO_PORTA | GPIO_AF | 0) -#define PA1_AOUT_SPI2_RXD (GPIO_PORTA | GPIO_AOUT | GPIO_IN | 1) -#define PA1_PF_TIN (GPIO_PORTA | GPIO_PF | 1) -#define PA2_PF_PWM0 (GPIO_PORTA | GPIO_PF | GPIO_OUT | 2) -#define PA3_PF_CSI_MCLK (GPIO_PORTA | GPIO_PF | 3) -#define PA4_PF_CSI_D0 (GPIO_PORTA | GPIO_PF | 4) -#define PA5_PF_CSI_D1 (GPIO_PORTA | GPIO_PF | 5) -#define PA6_PF_CSI_D2 (GPIO_PORTA | GPIO_PF | 6) -#define PA7_PF_CSI_D3 (GPIO_PORTA | GPIO_PF | 7) -#define PA8_PF_CSI_D4 (GPIO_PORTA | GPIO_PF | 8) -#define PA9_PF_CSI_D5 (GPIO_PORTA | GPIO_PF | 9) -#define PA10_PF_CSI_D6 (GPIO_PORTA | GPIO_PF | 10) -#define PA11_PF_CSI_D7 (GPIO_PORTA | GPIO_PF | 11) -#define PA12_PF_CSI_VSYNC (GPIO_PORTA | GPIO_PF | 12) -#define PA13_PF_CSI_HSYNC (GPIO_PORTA | GPIO_PF | 13) -#define PA14_PF_CSI_PIXCLK (GPIO_PORTA | GPIO_PF | 14) -#define PA15_PF_I2C_SDA (GPIO_PORTA | GPIO_PF | GPIO_OUT | 15) -#define PA16_PF_I2C_SCL (GPIO_PORTA | GPIO_PF | GPIO_OUT | 16) -#define PA17_AF_ETMTRACEPKT4 (GPIO_PORTA | GPIO_AF | 17) -#define PA17_AIN_SPI2_SS (GPIO_PORTA | GPIO_AIN | GPIO_OUT | 17) -#define PA18_AF_ETMTRACEPKT5 (GPIO_PORTA | GPIO_AF | 18) -#define PA19_AF_ETMTRACEPKT6 (GPIO_PORTA | GPIO_AF | 19) -#define PA20_AF_ETMTRACEPKT7 (GPIO_PORTA | GPIO_AF | 20) -#define PA21_PF_A0 (GPIO_PORTA | GPIO_PF | 21) -#define PA22_PF_CS4 (GPIO_PORTA | GPIO_PF | 22) -#define PA23_PF_CS5 (GPIO_PORTA | GPIO_PF | 23) -#define PA24_PF_A16 (GPIO_PORTA | GPIO_PF | 24) -#define PA24_AF_ETMTRACEPKT0 (GPIO_PORTA | GPIO_AF | 24) -#define PA25_PF_A17 (GPIO_PORTA | GPIO_PF | 25) -#define PA25_AF_ETMTRACEPKT1 (GPIO_PORTA | GPIO_AF | 25) -#define PA26_PF_A18 (GPIO_PORTA | GPIO_PF | 26) -#define PA26_AF_ETMTRACEPKT2 (GPIO_PORTA | GPIO_AF | 26) -#define PA27_PF_A19 (GPIO_PORTA | GPIO_PF | 27) -#define PA27_AF_ETMTRACEPKT3 (GPIO_PORTA | GPIO_AF | 27) -#define PA28_PF_A20 (GPIO_PORTA | GPIO_PF | 28) -#define PA28_AF_ETMPIPESTAT0 (GPIO_PORTA | GPIO_AF | 28) -#define PA29_PF_A21 (GPIO_PORTA | GPIO_PF | 29) -#define PA29_AF_ETMPIPESTAT1 (GPIO_PORTA | GPIO_AF | 29) -#define PA30_PF_A22 (GPIO_PORTA | GPIO_PF | 30) -#define PA30_AF_ETMPIPESTAT2 (GPIO_PORTA | GPIO_AF | 30) -#define PA31_PF_A23 (GPIO_PORTA | GPIO_PF | 31) -#define PA31_AF_ETMTRACECLK (GPIO_PORTA | GPIO_AF | 31) -#define PB8_PF_SD_DAT0 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8) -#define PB8_AF_MS_PIO (GPIO_PORTB | GPIO_AF | 8) -#define PB9_PF_SD_DAT1 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9) -#define PB9_AF_MS_PI1 (GPIO_PORTB | GPIO_AF | 9) -#define PB10_PF_SD_DAT2 (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10) -#define PB10_AF_MS_SCLKI (GPIO_PORTB | GPIO_AF | 10) -#define PB11_PF_SD_DAT3 (GPIO_PORTB | GPIO_PF | 11) -#define PB11_AF_MS_SDIO (GPIO_PORTB | GPIO_AF | 11) -#define PB12_PF_SD_CLK (GPIO_PORTB | GPIO_PF | 12) -#define PB12_AF_MS_SCLK0 (GPIO_PORTB | GPIO_AF | 12) -#define PB13_PF_SD_CMD (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13) -#define PB13_AF_MS_BS (GPIO_PORTB | GPIO_AF | 13) -#define PB14_AF_SSI_RXFS (GPIO_PORTB | GPIO_AF | 14) -#define PB15_AF_SSI_RXCLK (GPIO_PORTB | GPIO_AF | 15) -#define PB16_AF_SSI_RXDAT (GPIO_PORTB | GPIO_AF | GPIO_IN | 16) -#define PB17_AF_SSI_TXDAT (GPIO_PORTB | GPIO_AF | GPIO_OUT | 17) -#define PB18_AF_SSI_TXFS (GPIO_PORTB | GPIO_AF | 18) -#define PB19_AF_SSI_TXCLK (GPIO_PORTB | GPIO_AF | 19) -#define PB20_PF_USBD_AFE (GPIO_PORTB | GPIO_PF | 20) -#define PB21_PF_USBD_OE (GPIO_PORTB | GPIO_PF | 21) -#define PB22_PF_USBD_RCV (GPIO_PORTB | GPIO_PF | 22) -#define PB23_PF_USBD_SUSPND (GPIO_PORTB | GPIO_PF | 23) -#define PB24_PF_USBD_VP (GPIO_PORTB | GPIO_PF | 24) -#define PB25_PF_USBD_VM (GPIO_PORTB | GPIO_PF | 25) -#define PB26_PF_USBD_VPO (GPIO_PORTB | GPIO_PF | 26) -#define PB27_PF_USBD_VMO (GPIO_PORTB | GPIO_PF | 27) -#define PB28_PF_UART2_CTS (GPIO_PORTB | GPIO_PF | GPIO_OUT | 28) -#define PB29_PF_UART2_RTS (GPIO_PORTB | GPIO_PF | GPIO_IN | 29) -#define PB30_PF_UART2_TXD (GPIO_PORTB | GPIO_PF | GPIO_OUT | 30) -#define PB31_PF_UART2_RXD (GPIO_PORTB | GPIO_PF | GPIO_IN | 31) -#define PC3_PF_SSI_RXFS (GPIO_PORTC | GPIO_PF | 3) -#define PC4_PF_SSI_RXCLK (GPIO_PORTC | GPIO_PF | 4) -#define PC5_PF_SSI_RXDAT (GPIO_PORTC | GPIO_PF | GPIO_IN | 5) -#define PC6_PF_SSI_TXDAT (GPIO_PORTC | GPIO_PF | GPIO_OUT | 6) -#define PC7_PF_SSI_TXFS (GPIO_PORTC | GPIO_PF | 7) -#define PC8_PF_SSI_TXCLK (GPIO_PORTC | GPIO_PF | 8) -#define PC9_PF_UART1_CTS (GPIO_PORTC | GPIO_PF | GPIO_OUT | 9) -#define PC10_PF_UART1_RTS (GPIO_PORTC | GPIO_PF | GPIO_IN | 10) -#define PC11_PF_UART1_TXD (GPIO_PORTC | GPIO_PF | GPIO_OUT | 11) -#define PC12_PF_UART1_RXD (GPIO_PORTC | GPIO_PF | GPIO_IN | 12) -#define PC13_PF_SPI1_SPI_RDY (GPIO_PORTC | GPIO_PF | 13) -#define PC14_PF_SPI1_SCLK (GPIO_PORTC | GPIO_PF | 14) -#define PC15_PF_SPI1_SS (GPIO_PORTC | GPIO_PF | 15) -#define PC16_PF_SPI1_MISO (GPIO_PORTC | GPIO_PF | 16) -#define PC17_PF_SPI1_MOSI (GPIO_PORTC | GPIO_PF | 17) -#define PC24_BIN_UART3_RI (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 24) -#define PC25_BIN_UART3_DSR (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 25) -#define PC26_AOUT_UART3_DTR (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 26) -#define PC27_BIN_UART3_DCD (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 27) -#define PC28_BIN_UART3_CTS (GPIO_PORTC | GPIO_BIN | GPIO_OUT | 28) -#define PC29_AOUT_UART3_RTS (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 29) -#define PC30_BIN_UART3_TX (GPIO_PORTC | GPIO_BIN | 30) -#define PC31_AOUT_UART3_RX (GPIO_PORTC | GPIO_AOUT | GPIO_IN | 31) -#define PD6_PF_LSCLK (GPIO_PORTD | GPIO_PF | GPIO_OUT | 6) -#define PD7_PF_REV (GPIO_PORTD | GPIO_PF | 7) -#define PD7_AF_UART2_DTR (GPIO_PORTD | GPIO_AF | GPIO_IN | 7) -#define PD7_AIN_SPI2_SCLK (GPIO_PORTD | GPIO_AIN | 7) -#define PD8_PF_CLS (GPIO_PORTD | GPIO_PF | 8) -#define PD8_AF_UART2_DCD (GPIO_PORTD | GPIO_AF | GPIO_OUT | 8) -#define PD8_AIN_SPI2_SS (GPIO_PORTD | GPIO_AIN | 8) -#define PD9_PF_PS (GPIO_PORTD | GPIO_PF | 9) -#define PD9_AF_UART2_RI (GPIO_PORTD | GPIO_AF | GPIO_OUT | 9) -#define PD9_AOUT_SPI2_RXD (GPIO_PORTD | GPIO_AOUT | GPIO_IN | 9) -#define PD10_PF_SPL_SPR (GPIO_PORTD | GPIO_PF | GPIO_OUT | 10) -#define PD10_AF_UART2_DSR (GPIO_PORTD | GPIO_AF | GPIO_OUT | 10) -#define PD10_AIN_SPI2_TXD (GPIO_PORTD | GPIO_AIN | GPIO_OUT | 10) -#define PD11_PF_CONTRAST (GPIO_PORTD | GPIO_PF | GPIO_OUT | 11) -#define PD12_PF_ACD_OE (GPIO_PORTD | GPIO_PF | GPIO_OUT | 12) -#define PD13_PF_LP_HSYNC (GPIO_PORTD | GPIO_PF | GPIO_OUT | 13) -#define PD14_PF_FLM_VSYNC (GPIO_PORTD | GPIO_PF | GPIO_OUT | 14) -#define PD15_PF_LD0 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 15) -#define PD16_PF_LD1 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 16) -#define PD17_PF_LD2 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 17) -#define PD18_PF_LD3 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 18) -#define PD19_PF_LD4 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 19) -#define PD20_PF_LD5 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 20) -#define PD21_PF_LD6 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 21) -#define PD22_PF_LD7 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 22) -#define PD23_PF_LD8 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 23) -#define PD24_PF_LD9 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 24) -#define PD25_PF_LD10 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 25) -#define PD26_PF_LD11 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 26) -#define PD27_PF_LD12 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 27) -#define PD28_PF_LD13 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 28) -#define PD29_PF_LD14 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 29) -#define PD30_PF_LD15 (GPIO_PORTD | GPIO_PF | GPIO_OUT | 30) -#define PD31_PF_TMR2OUT (GPIO_PORTD | GPIO_PF | 31) -#define PD31_BIN_SPI2_TXD (GPIO_PORTD | GPIO_BIN | 31) - -#endif /* ifndef __MACH_IOMUX_MX1_H__ */ diff --git a/arch/arm/mach-imx/iomux-mx3.h b/arch/arm/mach-imx/iomux-mx3.h index 2e4a0dd..368667b 100644 --- a/arch/arm/mach-imx/iomux-mx3.h +++ b/arch/arm/mach-imx/iomux-mx3.h @@ -598,10 +598,7 @@ enum iomux_pins { #define MX31_PIN_CONTRAST__CONTRAST IOMUX_MODE(MX31_PIN_CONTRAST, IOMUX_CONFIG_FUNC) #define MX31_PIN_D3_SPL__D3_SPL IOMUX_MODE(MX31_PIN_D3_SPL, IOMUX_CONFIG_FUNC) #define MX31_PIN_D3_CLS__D3_CLS IOMUX_MODE(MX31_PIN_D3_CLS, IOMUX_CONFIG_FUNC) -#define MX31_PIN_LCS0__GPI03_23 IOMUX_MODE(MX31_PIN_LCS0, IOMUX_CONFIG_GPIO) #define MX31_PIN_GPIO1_1__GPIO IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO) -#define MX31_PIN_I2C_CLK__SCL IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC) -#define MX31_PIN_I2C_DAT__SDA IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC) #define MX31_PIN_DCD_DTE1__I2C2_SDA IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2) #define MX31_PIN_RI_DTE1__I2C2_SCL IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2) #define MX31_PIN_CSPI2_SS2__I2C3_SDA IOMUX_MODE(MX31_PIN_CSPI2_SS2, IOMUX_CONFIG_ALT1) @@ -665,37 +662,6 @@ enum iomux_pins { #define MX31_PIN_USB_OC__GPIO1_30 IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO) #define MX31_PIN_I2C_DAT__I2C1_SDA IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC) #define MX31_PIN_I2C_CLK__I2C1_SCL IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC) -#define MX31_PIN_DCD_DTE1__I2C2_SDA IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2) -#define MX31_PIN_RI_DTE1__I2C2_SCL IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2) -#define MX31_PIN_ATA_CS0__GPIO3_26 IOMUX_MODE(MX31_PIN_ATA_CS0, IOMUX_CONFIG_GPIO) -#define MX31_PIN_ATA_CS1__GPIO3_27 IOMUX_MODE(MX31_PIN_ATA_CS1, IOMUX_CONFIG_GPIO) -#define MX31_PIN_PC_PWRON__SD2_DATA3 IOMUX_MODE(MX31_PIN_PC_PWRON, IOMUX_CONFIG_ALT1) -#define MX31_PIN_PC_VS1__SD2_DATA2 IOMUX_MODE(MX31_PIN_PC_VS1, IOMUX_CONFIG_ALT1) -#define MX31_PIN_PC_READY__SD2_DATA1 IOMUX_MODE(MX31_PIN_PC_READY, IOMUX_CONFIG_ALT1) -#define MX31_PIN_PC_WAIT_B__SD2_DATA0 IOMUX_MODE(MX31_PIN_PC_WAIT_B, IOMUX_CONFIG_ALT1) -#define MX31_PIN_PC_CD2_B__SD2_CLK IOMUX_MODE(MX31_PIN_PC_CD2_B, IOMUX_CONFIG_ALT1) -#define MX31_PIN_PC_CD1_B__SD2_CMD IOMUX_MODE(MX31_PIN_PC_CD1_B, IOMUX_CONFIG_ALT1) -#define MX31_PIN_ATA_DIOR__GPIO3_28 IOMUX_MODE(MX31_PIN_ATA_DIOR, IOMUX_CONFIG_GPIO) -#define MX31_PIN_ATA_DIOW__GPIO3_29 IOMUX_MODE(MX31_PIN_ATA_DIOW, IOMUX_CONFIG_GPIO) -#define MX31_PIN_CSI_D4__CSI_D4 IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_D5__CSI_D5 IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_D6__CSI_D6 IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_D7__CSI_D7 IOMUX_MODE(MX31_PIN_CSI_D7, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_D8__CSI_D8 IOMUX_MODE(MX31_PIN_CSI_D8, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_D9__CSI_D9 IOMUX_MODE(MX31_PIN_CSI_D9, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_D10__CSI_D10 IOMUX_MODE(MX31_PIN_CSI_D10, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_D11__CSI_D11 IOMUX_MODE(MX31_PIN_CSI_D11, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_D12__CSI_D12 IOMUX_MODE(MX31_PIN_CSI_D12, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_D13__CSI_D13 IOMUX_MODE(MX31_PIN_CSI_D13, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_D14__CSI_D14 IOMUX_MODE(MX31_PIN_CSI_D14, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_D15__CSI_D15 IOMUX_MODE(MX31_PIN_CSI_D15, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_HSYNC__CSI_HSYNC IOMUX_MODE(MX31_PIN_CSI_HSYNC, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_MCLK__CSI_MCLK IOMUX_MODE(MX31_PIN_CSI_MCLK, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_PIXCLK__CSI_PIXCLK IOMUX_MODE(MX31_PIN_CSI_PIXCLK, IOMUX_CONFIG_FUNC) -#define MX31_PIN_CSI_VSYNC__CSI_VSYNC IOMUX_MODE(MX31_PIN_CSI_VSYNC, IOMUX_CONFIG_FUNC) -#define MX31_PIN_GPIO3_0__GPIO3_0 IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO) -#define MX31_PIN_GPIO3_1__GPIO3_1 IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO) -#define MX31_PIN_TXD2__GPIO1_28 IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO) #define MX31_PIN_GPIO1_0__GPIO1_0 IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO) #define MX31_PIN_SVEN0__GPIO2_0 IOMUX_MODE(MX31_PIN_SVEN0, IOMUX_CONFIG_GPIO) #define MX31_PIN_STX0__GPIO2_1 IOMUX_MODE(MX31_PIN_STX0, IOMUX_CONFIG_GPIO) diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c deleted file mode 100644 index ebbb5ab..0000000 --- a/arch/arm/mach-imx/mach-apf9328.c +++ /dev/null @@ -1,148 +0,0 @@ -/* - * linux/arch/arm/mach-imx/mach-apf9328.c - * - * Copyright (c) 2005-2011 ARMadeus systems <support@armadeus.com> - * - * This work is based on mach-scb9328.c which is: - * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de> - * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/mtd/physmap.h> -#include <linux/dm9000.h> -#include <linux/gpio.h> -#include <linux/i2c.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> - -#include "common.h" -#include "devices-imx1.h" -#include "hardware.h" -#include "iomux-mx1.h" - -static const int apf9328_pins[] __initconst = { - /* UART1 */ - PC9_PF_UART1_CTS, - PC10_PF_UART1_RTS, - PC11_PF_UART1_TXD, - PC12_PF_UART1_RXD, - /* UART2 */ - PB28_PF_UART2_CTS, - PB29_PF_UART2_RTS, - PB30_PF_UART2_TXD, - PB31_PF_UART2_RXD, - /* I2C */ - PA15_PF_I2C_SDA, - PA16_PF_I2C_SCL, -}; - -/* - * The APF9328 can have up to 32MB NOR Flash - */ -static struct resource flash_resource = { - .start = MX1_CS0_PHYS, - .end = MX1_CS0_PHYS + SZ_32M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct physmap_flash_data apf9328_flash_data = { - .width = 2, -}; - -static struct platform_device apf9328_flash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &apf9328_flash_data, - }, - .resource = &flash_resource, - .num_resources = 1, -}; - -/* - * APF9328 has a DM9000 Ethernet controller - */ -static struct dm9000_plat_data dm9000_setup = { - .flags = DM9000_PLATF_16BITONLY -}; - -static struct resource dm9000_resources[] = { - { - .start = MX1_CS4_PHYS + 0x00C00000, - .end = MX1_CS4_PHYS + 0x00C00001, - .flags = IORESOURCE_MEM, - }, { - .start = MX1_CS4_PHYS + 0x00C00002, - .end = MX1_CS4_PHYS + 0x00C00003, - .flags = IORESOURCE_MEM, - }, { - /* irq number is run-time assigned */ - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct platform_device dm9000x_device = { - .name = "dm9000", - .id = 0, - .num_resources = ARRAY_SIZE(dm9000_resources), - .resource = dm9000_resources, - .dev = { - .platform_data = &dm9000_setup, - } -}; - -static const struct imxuart_platform_data uart1_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static const struct imxi2c_platform_data apf9328_i2c_data __initconst = { - .bitrate = 100000, -}; - -static struct platform_device *devices[] __initdata = { - &apf9328_flash_device, - &dm9000x_device, -}; - -static void __init apf9328_init(void) -{ - imx1_soc_init(); - - mxc_gpio_setup_multiple_pins(apf9328_pins, - ARRAY_SIZE(apf9328_pins), - "APF9328"); - - imx1_add_imx_uart0(NULL); - imx1_add_imx_uart1(&uart1_pdata); - - imx1_add_imx_i2c(&apf9328_i2c_data); - - dm9000_resources[2].start = gpio_to_irq(IMX_GPIO_NR(2, 14)); - dm9000_resources[2].end = gpio_to_irq(IMX_GPIO_NR(2, 14)); - platform_add_devices(devices, ARRAY_SIZE(devices)); -} - -static void __init apf9328_timer_init(void) -{ - mx1_clocks_init(32768); -} - -MACHINE_START(APF9328, "Armadeus APF9328") - /* Maintainer: Gwenhael Goavec-Merou, ARMadeus Systems */ - .map_io = mx1_map_io, - .init_early = imx1_init_early, - .init_irq = mx1_init_irq, - .init_time = apf9328_timer_init, - .init_machine = apf9328_init, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/imx1-dt.c b/arch/arm/mach-imx/mach-imx1.c index 6f915b0..de5ab8d 100644 --- a/arch/arm/mach-imx/imx1-dt.c +++ b/arch/arm/mach-imx/mach-imx1.c @@ -9,8 +9,27 @@ #include <linux/of_platform.h> #include <asm/mach/arch.h> +#include <asm/mach/map.h> #include "common.h" +#include "hardware.h" + +#define MX1_AVIC_ADDR 0x00223000 + +static void __init imx1_init_early(void) +{ + mxc_set_cpu_type(MXC_CPU_MX1); +} + +static void __init imx1_init_irq(void) +{ + void __iomem *avic_addr; + + avic_addr = ioremap(MX1_AVIC_ADDR, SZ_4K); + WARN_ON(!avic_addr); + + mxc_init_irq(avic_addr); +} static const char * const imx1_dt_board_compat[] __initconst = { "fsl,imx1", @@ -18,9 +37,9 @@ static const char * const imx1_dt_board_compat[] __initconst = { }; DT_MACHINE_START(IMX1_DT, "Freescale i.MX1 (Device Tree Support)") - .map_io = mx1_map_io, + .map_io = debug_ll_io_init, .init_early = imx1_init_early, - .init_irq = mx1_init_irq, + .init_irq = imx1_init_irq, .dt_compat = imx1_dt_board_compat, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c index 31df436..e277d9c 100644 --- a/arch/arm/mach-imx/mach-kzm_arm11_01.c +++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c @@ -63,7 +63,7 @@ */ #define KZM_ARM11_16550 (MX31_CS4_BASE_ADDR + 0x1050) -#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_8250) /* * KZM-ARM11-01 has an external UART on FPGA */ @@ -141,7 +141,7 @@ static inline int kzm_init_ext_uart(void) /* * SMSC LAN9118 */ -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +#if IS_ENABLED(CONFIG_SMSC911X) static struct smsc911x_platform_config kzm_smsc9118_config = { .phy_interface = PHY_INTERFACE_MODE_MII, .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, @@ -201,7 +201,7 @@ static inline int kzm_init_smsc9118(void) } #endif -#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE) +#if IS_ENABLED(CONFIG_SERIAL_IMX) static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c index 6d87941..a159a77 100644 --- a/arch/arm/mach-imx/mach-pcm037.c +++ b/arch/arm/mach-imx/mach-pcm037.c @@ -149,7 +149,7 @@ static unsigned int pcm037_pins[] = { MX31_PIN_CONTRAST__CONTRAST, MX31_PIN_D3_SPL__D3_SPL, MX31_PIN_D3_CLS__D3_CLS, - MX31_PIN_LCS0__GPI03_23, + MX31_PIN_LCS0__GPIO3_23, /* CSI */ IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO), MX31_PIN_CSI_D6__CSI_D6, diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c deleted file mode 100644 index 1f6bc3f..0000000 --- a/arch/arm/mach-imx/mach-scb9328.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - * linux/arch/arm/mach-mx1/mach-scb9328.c - * - * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de> - * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/platform_device.h> -#include <linux/mtd/physmap.h> -#include <linux/interrupt.h> -#include <linux/dm9000.h> -#include <linux/gpio.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/time.h> - -#include "common.h" -#include "devices-imx1.h" -#include "hardware.h" -#include "iomux-mx1.h" - -/* - * This scb9328 has a 32MiB flash - */ -static struct resource flash_resource = { - .start = MX1_CS0_PHYS, - .end = MX1_CS0_PHYS + (32 * 1024 * 1024) - 1, - .flags = IORESOURCE_MEM, -}; - -static struct physmap_flash_data scb_flash_data = { - .width = 2, -}; - -static struct platform_device scb_flash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &scb_flash_data, - }, - .resource = &flash_resource, - .num_resources = 1, -}; - -/* - * scb9328 has a DM9000 network controller - * connected to CS5, with 16 bit data path - * and interrupt connected to GPIO 3 - */ - -/* - * internal datapath is fixed 16 bit - */ -static struct dm9000_plat_data dm9000_platdata = { - .flags = DM9000_PLATF_16BITONLY, -}; - -/* - * the DM9000 drivers wants two defined address spaces - * to gain access to address latch registers and the data path. - */ -static struct resource dm9000x_resources[] = { - { - .name = "address area", - .start = MX1_CS5_PHYS, - .end = MX1_CS5_PHYS + 1, - .flags = IORESOURCE_MEM, /* address access */ - }, { - .name = "data area", - .start = MX1_CS5_PHYS + 4, - .end = MX1_CS5_PHYS + 5, - .flags = IORESOURCE_MEM, /* data access */ - }, { - /* irq number is run-time assigned */ - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct platform_device dm9000x_device = { - .name = "dm9000", - .id = 0, - .num_resources = ARRAY_SIZE(dm9000x_resources), - .resource = dm9000x_resources, - .dev = { - .platform_data = &dm9000_platdata, - } -}; - -static const int mxc_uart1_pins[] = { - PC9_PF_UART1_CTS, - PC10_PF_UART1_RTS, - PC11_PF_UART1_TXD, - PC12_PF_UART1_RXD, -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static struct platform_device *devices[] __initdata = { - &scb_flash_device, - &dm9000x_device, -}; - -/* - * scb9328_init - Init the CPU card itself - */ -static void __init scb9328_init(void) -{ - imx1_soc_init(); - - mxc_gpio_setup_multiple_pins(mxc_uart1_pins, - ARRAY_SIZE(mxc_uart1_pins), "UART1"); - - imx1_add_imx_uart0(&uart_pdata); - - printk(KERN_INFO"Scb9328: Adding devices\n"); - dm9000x_resources[2].start = gpio_to_irq(IMX_GPIO_NR(3, 3)); - dm9000x_resources[2].end = gpio_to_irq(IMX_GPIO_NR(3, 3)); - platform_add_devices(devices, ARRAY_SIZE(devices)); -} - -static void __init scb9328_timer_init(void) -{ - mx1_clocks_init(32000); -} - -MACHINE_START(SCB9328, "Synertronixx scb9328") - /* Sascha Hauer */ - .atag_offset = 100, - .map_io = mx1_map_io, - .init_early = imx1_init_early, - .init_irq = mx1_init_irq, - .init_time = scb9328_timer_init, - .init_machine = scb9328_init, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c deleted file mode 100644 index 9a42f19..0000000 --- a/arch/arm/mach-imx/mm-imx1.c +++ /dev/null @@ -1,67 +0,0 @@ -/* - * author: Sascha Hauer - * Created: april 20th, 2004 - * Copyright: Synertronixx GmbH - * - * Common code for i.MX1 machines - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/pinctrl/machine.h> - -#include <asm/mach/map.h> - -#include "common.h" -#include "devices/devices-common.h" -#include "hardware.h" -#include "iomux-v1.h" - -static struct map_desc imx_io_desc[] __initdata = { - imx_map_entry(MX1, IO, MT_DEVICE), -}; - -void __init mx1_map_io(void) -{ - iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc)); -} - -void __init imx1_init_early(void) -{ - mxc_set_cpu_type(MXC_CPU_MX1); - imx_iomuxv1_init(MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR), - MX1_NUM_GPIO_PORT); -} - -void __init mx1_init_irq(void) -{ - mxc_init_irq(MX1_IO_ADDRESS(MX1_AVIC_BASE_ADDR)); -} - -void __init imx1_soc_init(void) -{ - imx1_reset_init(MX1_IO_ADDRESS(MX1_WDT_BASE_ADDR)); - mxc_device_init(); - - mxc_register_gpio("imx1-gpio", 0, MX1_GPIO1_BASE_ADDR, SZ_256, - MX1_GPIO_INT_PORTA, 0); - mxc_register_gpio("imx1-gpio", 1, MX1_GPIO2_BASE_ADDR, SZ_256, - MX1_GPIO_INT_PORTB, 0); - mxc_register_gpio("imx1-gpio", 2, MX1_GPIO3_BASE_ADDR, SZ_256, - MX1_GPIO_INT_PORTC, 0); - mxc_register_gpio("imx1-gpio", 3, MX1_GPIO4_BASE_ADDR, SZ_256, - MX1_GPIO_INT_PORTD, 0); - imx_add_imx_dma("imx1-dma", MX1_DMA_BASE_ADDR, - MX1_DMA_INT, MX1_DMA_ERR); - pinctrl_provide_dummies(); -} diff --git a/arch/arm/mach-imx/mx1.h b/arch/arm/mach-imx/mx1.h deleted file mode 100644 index 45bd31c..0000000 --- a/arch/arm/mach-imx/mx1.h +++ /dev/null @@ -1,172 +0,0 @@ -/* - * Copyright (C) 1997,1998 Russell King - * Copyright (C) 1999 ARM Limited - * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __MACH_MX1_H__ -#define __MACH_MX1_H__ - -/* - * Memory map - */ -#define MX1_IO_BASE_ADDR 0x00200000 -#define MX1_IO_SIZE SZ_1M - -#define MX1_CS0_PHYS 0x10000000 -#define MX1_CS0_SIZE 0x02000000 - -#define MX1_CS1_PHYS 0x12000000 -#define MX1_CS1_SIZE 0x01000000 - -#define MX1_CS2_PHYS 0x13000000 -#define MX1_CS2_SIZE 0x01000000 - -#define MX1_CS3_PHYS 0x14000000 -#define MX1_CS3_SIZE 0x01000000 - -#define MX1_CS4_PHYS 0x15000000 -#define MX1_CS4_SIZE 0x01000000 - -#define MX1_CS5_PHYS 0x16000000 -#define MX1_CS5_SIZE 0x01000000 - -/* - * Register BASEs, based on OFFSETs - */ -#define MX1_AIPI1_BASE_ADDR (0x00000 + MX1_IO_BASE_ADDR) -#define MX1_WDT_BASE_ADDR (0x01000 + MX1_IO_BASE_ADDR) -#define MX1_TIM1_BASE_ADDR (0x02000 + MX1_IO_BASE_ADDR) -#define MX1_TIM2_BASE_ADDR (0x03000 + MX1_IO_BASE_ADDR) -#define MX1_RTC_BASE_ADDR (0x04000 + MX1_IO_BASE_ADDR) -#define MX1_LCDC_BASE_ADDR (0x05000 + MX1_IO_BASE_ADDR) -#define MX1_UART1_BASE_ADDR (0x06000 + MX1_IO_BASE_ADDR) -#define MX1_UART2_BASE_ADDR (0x07000 + MX1_IO_BASE_ADDR) -#define MX1_PWM_BASE_ADDR (0x08000 + MX1_IO_BASE_ADDR) -#define MX1_DMA_BASE_ADDR (0x09000 + MX1_IO_BASE_ADDR) -#define MX1_AIPI2_BASE_ADDR (0x10000 + MX1_IO_BASE_ADDR) -#define MX1_SIM_BASE_ADDR (0x11000 + MX1_IO_BASE_ADDR) -#define MX1_USBD_BASE_ADDR (0x12000 + MX1_IO_BASE_ADDR) -#define MX1_CSPI1_BASE_ADDR (0x13000 + MX1_IO_BASE_ADDR) -#define MX1_MMC_BASE_ADDR (0x14000 + MX1_IO_BASE_ADDR) -#define MX1_ASP_BASE_ADDR (0x15000 + MX1_IO_BASE_ADDR) -#define MX1_BTA_BASE_ADDR (0x16000 + MX1_IO_BASE_ADDR) -#define MX1_I2C_BASE_ADDR (0x17000 + MX1_IO_BASE_ADDR) -#define MX1_SSI_BASE_ADDR (0x18000 + MX1_IO_BASE_ADDR) -#define MX1_CSPI2_BASE_ADDR (0x19000 + MX1_IO_BASE_ADDR) -#define MX1_MSHC_BASE_ADDR (0x1A000 + MX1_IO_BASE_ADDR) -#define MX1_CCM_BASE_ADDR (0x1B000 + MX1_IO_BASE_ADDR) -#define MX1_SCM_BASE_ADDR (0x1B804 + MX1_IO_BASE_ADDR) -#define MX1_GPIO_BASE_ADDR (0x1C000 + MX1_IO_BASE_ADDR) -#define MX1_GPIO1_BASE_ADDR (0x1C000 + MX1_IO_BASE_ADDR) -#define MX1_GPIO2_BASE_ADDR (0x1C100 + MX1_IO_BASE_ADDR) -#define MX1_GPIO3_BASE_ADDR (0x1C200 + MX1_IO_BASE_ADDR) -#define MX1_GPIO4_BASE_ADDR (0x1C300 + MX1_IO_BASE_ADDR) -#define MX1_EIM_BASE_ADDR (0x20000 + MX1_IO_BASE_ADDR) -#define MX1_SDRAMC_BASE_ADDR (0x21000 + MX1_IO_BASE_ADDR) -#define MX1_MMA_BASE_ADDR (0x22000 + MX1_IO_BASE_ADDR) -#define MX1_AVIC_BASE_ADDR (0x23000 + MX1_IO_BASE_ADDR) -#define MX1_CSI_BASE_ADDR (0x24000 + MX1_IO_BASE_ADDR) - -/* macro to get at IO space when running virtually */ -#define MX1_IO_P2V(x) IMX_IO_P2V(x) -#define MX1_IO_ADDRESS(x) IOMEM(MX1_IO_P2V(x)) - -/* fixed interrput numbers */ -#include <asm/irq.h> -#define MX1_INT_SOFTINT (NR_IRQS_LEGACY + 0) -#define MX1_INT_CSI (NR_IRQS_LEGACY + 6) -#define MX1_DSPA_MAC_INT (NR_IRQS_LEGACY + 7) -#define MX1_DSPA_INT (NR_IRQS_LEGACY + 8) -#define MX1_COMP_INT (NR_IRQS_LEGACY + 9) -#define MX1_MSHC_XINT (NR_IRQS_LEGACY + 10) -#define MX1_GPIO_INT_PORTA (NR_IRQS_LEGACY + 11) -#define MX1_GPIO_INT_PORTB (NR_IRQS_LEGACY + 12) -#define MX1_GPIO_INT_PORTC (NR_IRQS_LEGACY + 13) -#define MX1_INT_LCDC (NR_IRQS_LEGACY + 14) -#define MX1_SIM_INT (NR_IRQS_LEGACY + 15) -#define MX1_SIM_DATA_INT (NR_IRQS_LEGACY + 16) -#define MX1_RTC_INT (NR_IRQS_LEGACY + 17) -#define MX1_RTC_SAMINT (NR_IRQS_LEGACY + 18) -#define MX1_INT_UART2PFERR (NR_IRQS_LEGACY + 19) -#define MX1_INT_UART2RTS (NR_IRQS_LEGACY + 20) -#define MX1_INT_UART2DTR (NR_IRQS_LEGACY + 21) -#define MX1_INT_UART2UARTC (NR_IRQS_LEGACY + 22) -#define MX1_INT_UART2TX (NR_IRQS_LEGACY + 23) -#define MX1_INT_UART2RX (NR_IRQS_LEGACY + 24) -#define MX1_INT_UART1PFERR (NR_IRQS_LEGACY + 25) -#define MX1_INT_UART1RTS (NR_IRQS_LEGACY + 26) -#define MX1_INT_UART1DTR (NR_IRQS_LEGACY + 27) -#define MX1_INT_UART1UARTC (NR_IRQS_LEGACY + 28) -#define MX1_INT_UART1TX (NR_IRQS_LEGACY + 29) -#define MX1_INT_UART1RX (NR_IRQS_LEGACY + 30) -#define MX1_VOICE_DAC_INT (NR_IRQS_LEGACY + 31) -#define MX1_VOICE_ADC_INT (NR_IRQS_LEGACY + 32) -#define MX1_PEN_DATA_INT (NR_IRQS_LEGACY + 33) -#define MX1_PWM_INT (NR_IRQS_LEGACY + 34) -#define MX1_SDHC_INT (NR_IRQS_LEGACY + 35) -#define MX1_INT_I2C (NR_IRQS_LEGACY + 39) -#define MX1_INT_CSPI2 (NR_IRQS_LEGACY + 40) -#define MX1_INT_CSPI1 (NR_IRQS_LEGACY + 41) -#define MX1_SSI_TX_INT (NR_IRQS_LEGACY + 42) -#define MX1_SSI_TX_ERR_INT (NR_IRQS_LEGACY + 43) -#define MX1_SSI_RX_INT (NR_IRQS_LEGACY + 44) -#define MX1_SSI_RX_ERR_INT (NR_IRQS_LEGACY + 45) -#define MX1_TOUCH_INT (NR_IRQS_LEGACY + 46) -#define MX1_INT_USBD0 (NR_IRQS_LEGACY + 47) -#define MX1_INT_USBD1 (NR_IRQS_LEGACY + 48) -#define MX1_INT_USBD2 (NR_IRQS_LEGACY + 49) -#define MX1_INT_USBD3 (NR_IRQS_LEGACY + 50) -#define MX1_INT_USBD4 (NR_IRQS_LEGACY + 51) -#define MX1_INT_USBD5 (NR_IRQS_LEGACY + 52) -#define MX1_INT_USBD6 (NR_IRQS_LEGACY + 53) -#define MX1_BTSYS_INT (NR_IRQS_LEGACY + 55) -#define MX1_BTTIM_INT (NR_IRQS_LEGACY + 56) -#define MX1_BTWUI_INT (NR_IRQS_LEGACY + 57) -#define MX1_TIM2_INT (NR_IRQS_LEGACY + 58) -#define MX1_TIM1_INT (NR_IRQS_LEGACY + 59) -#define MX1_DMA_ERR (NR_IRQS_LEGACY + 60) -#define MX1_DMA_INT (NR_IRQS_LEGACY + 61) -#define MX1_GPIO_INT_PORTD (NR_IRQS_LEGACY + 62) -#define MX1_WDT_INT (NR_IRQS_LEGACY + 63) - -/* DMA */ -#define MX1_DMA_REQ_UART3_T 2 -#define MX1_DMA_REQ_UART3_R 3 -#define MX1_DMA_REQ_SSI2_T 4 -#define MX1_DMA_REQ_SSI2_R 5 -#define MX1_DMA_REQ_CSI_STAT 6 -#define MX1_DMA_REQ_CSI_R 7 -#define MX1_DMA_REQ_MSHC 8 -#define MX1_DMA_REQ_DSPA_DCT_DOUT 9 -#define MX1_DMA_REQ_DSPA_DCT_DIN 10 -#define MX1_DMA_REQ_DSPA_MAC 11 -#define MX1_DMA_REQ_EXT 12 -#define MX1_DMA_REQ_SDHC 13 -#define MX1_DMA_REQ_SPI1_R 14 -#define MX1_DMA_REQ_SPI1_T 15 -#define MX1_DMA_REQ_SSI_T 16 -#define MX1_DMA_REQ_SSI_R 17 -#define MX1_DMA_REQ_ASP_DAC 18 -#define MX1_DMA_REQ_ASP_ADC 19 -#define MX1_DMA_REQ_USP_EP(x) (20 + (x)) -#define MX1_DMA_REQ_SPI2_R 26 -#define MX1_DMA_REQ_SPI2_T 27 -#define MX1_DMA_REQ_UART2_T 28 -#define MX1_DMA_REQ_UART2_R 29 -#define MX1_DMA_REQ_UART1_T 30 -#define MX1_DMA_REQ_UART1_R 31 - -/* - * This doesn't depend on IMX_NEEDS_DEPRECATED_SYMBOLS - * to not break drivers/usb/gadget/imx_udc. Should go - * away after this driver uses the new name. - */ -#define USBD_INT0 MX1_INT_USBD0 - -#endif /* ifndef __MACH_MX1_H__ */ |