ARM i.MX: introduce imx_otg_ulpi_create to create ULPI transceivers

The boards are currently using otg_ulpi_create and mxc_ulpi_access_ops,
both are only present if CONFIG_USB_ULPI is set. To remove the need of
ifdefs in the board code introduce a imx_otg_ulpi_create functions
which expands to a static inline function if compiled without ulpi.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

3 files changed, 25 insertions, 33 deletions

diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
index 6b724c2..759299b 100644
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -209,7 +209,6 @@ static struct platform_device serial_device = {
 };
 #endif
 
-#if defined(CONFIG_USB_ULPI)
 static int eukrea_cpuimx27_otg_init(struct platform_device *pdev)
 {
 	return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
@@ -229,7 +228,6 @@ static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
 	.init	= eukrea_cpuimx27_usbh2_init,
 	.portsc	= MXC_EHCI_MODE_ULPI,
 };
-#endif
 
 static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
 	.operating_mode = FSL_USB2_DR_DEVICE,
@@ -283,21 +281,19 @@ static void __init eukrea_cpuimx27_init(void)
 	platform_device_register(&serial_device);
 #endif
 
-#if defined(CONFIG_USB_ULPI)
 	if (otg_mode_host) {
-		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
-
-		imx27_add_mxc_ehci_otg(&otg_pdata);
+		otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+				ULPI_OTG_DRVVBUS_EXT);
+		if (otg_pdata.otg)
+			imx27_add_mxc_ehci_otg(&otg_pdata);
+	} else {
+		imx27_add_fsl_usb2_udc(&otg_device_pdata);
 	}
 
-	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
-
-	imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
-#endif
-	if (!otg_mode_host)
-		imx27_add_fsl_usb2_udc(&otg_device_pdata);
+	usbh2_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+			ULPI_OTG_DRVVBUS_EXT);
+	if (usbh2_pdata.otg)
+		imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
 
 #ifdef CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD
 	eukrea_mbimx27_baseboard_init();
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index f4f2725..614b3c0 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -162,7 +162,6 @@ static int otg_phy_init(void)
 	return 0;
 }
 
-#if defined(CONFIG_USB_ULPI)
 static int mx27_3ds_otg_init(struct platform_device *pdev)
 {
 	return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
@@ -172,7 +171,6 @@ static struct mxc_usbh_platform_data otg_pdata __initdata = {
 	.init	= mx27_3ds_otg_init,
 	.portsc	= MXC_EHCI_MODE_ULPI,
 };
-#endif
 
 static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
 	.operating_mode = FSL_USB2_DR_DEVICE,
@@ -275,14 +273,15 @@ static void __init mx27pdk_init(void)
 	imx27_add_mxc_mmc(0, &sdhc1_pdata);
 	imx27_add_imx2_wdt(NULL);
 	otg_phy_init();
-#if defined(CONFIG_USB_ULPI)
+
 	if (otg_mode_host) {
-		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
+		otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+				ULPI_OTG_DRVVBUS_EXT);
 
-		imx27_add_mxc_ehci_otg(&otg_pdata);
+		if (otg_pdata.otg)
+			imx27_add_mxc_ehci_otg(&otg_pdata);
 	}
-#endif
+
 	if (!otg_mode_host)
 		imx27_add_fsl_usb2_udc(&otg_device_pdata);
 
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index f754bab..63e1825 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -267,7 +267,6 @@ static const struct imxmmc_platform_data sdhc_pdata __initconst = {
 	.exit = pca100_sdhc2_exit,
 };
 
-#if defined(CONFIG_USB_ULPI)
 static int otg_phy_init(struct platform_device *pdev)
 {
 	gpio_set_value(OTG_PHY_CS_GPIO, 0);
@@ -295,7 +294,6 @@ static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
 	.init	= usbh2_phy_init,
 	.portsc	= MXC_EHCI_MODE_ULPI,
 };
-#endif
 
 static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
 	.operating_mode = FSL_USB2_DR_DEVICE,
@@ -402,23 +400,22 @@ static void __init pca100_init(void)
 	gpio_request(USBH2_PHY_CS_GPIO, "usb-host2-cs");
 	gpio_direction_output(USBH2_PHY_CS_GPIO, 1);
 
-#if defined(CONFIG_USB_ULPI)
 	if (otg_mode_host) {
-		otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
-				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
+		otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
+				ULPI_OTG_DRVVBUS_EXT);
 
-		imx27_add_mxc_ehci_otg(&otg_pdata);
+		if (otg_pdata.otg)
+			imx27_add_mxc_ehci_otg(&otg_pdata);
+	} else {
+		gpio_set_value(OTG_PHY_CS_GPIO, 0);
+		imx27_add_fsl_usb2_udc(&otg_device_pdata);
 	}
 
 	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
 				ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
 
-	imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
-#endif
-	if (!otg_mode_host) {
-		gpio_set_value(OTG_PHY_CS_GPIO, 0);
-		imx27_add_fsl_usb2_udc(&otg_device_pdata);
-	}
+	if (usbh2_pdata.otg)
+		imx27_add_mxc_ehci_hs(2, &usbh2_pdata);
 
 	imx27_add_imx_fb(&pca100_fb_data);