Merge tag 'pm' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

power management changes for omap and imx

A significant part of the changes for these two platforms went into
power management, so they are split out into a separate branch.

* tag 'pm' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (65 commits)
  ARM: imx6: remove __CPUINIT annotation from v7_invalidate_l1
  ARM: imx6: fix v7_invalidate_l1 by adding I-Cache invalidation
  ARM: imx6q: resume PL310 only when CACHE_L2X0 defined
  ARM: imx6q: build pm code only when CONFIG_PM selected
  ARM: mx5: use generic irq chip pm interface for pm functions on
  ARM: omap: pass minimal SoC/board data for UART from dt
  arm/dts: Add minimal device tree support for omap2420 and omap2430
  omap-serial: Add minimal device tree support
  omap-serial: Use default clock speed (48Mhz) if not specified
  omap-serial: Get rid of all pdev->id usage
  ARM: OMAP2+: hwmod: Add a new flag to handle hwmods left enabled at init
  ARM: OMAP4: PRM: use PRCM interrupt handler
  ARM: OMAP3: pm: use prcm chain handler
  ARM: OMAP: hwmod: add support for selecting mpu_irq for each wakeup pad
  ARM: OMAP2+: mux: add support for PAD wakeup interrupts
  ARM: OMAP: PRCM: add suspend prepare / finish support
  ARM: OMAP: PRCM: add support for chain interrupt handler
  ARM: OMAP3/4: PRM: add functions to read pending IRQs, PRM barrier
  ARM: OMAP2+: hwmod: Add API to enable IO ring wakeup
  ARM: OMAP2+: mux: add wakeup-capable hwmod mux entries to dynamic list
  ...

4 files changed, 20 insertions, 6 deletions

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 9d8598f..0e6de36 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -596,6 +596,7 @@ comment "i.MX6 family:"
 
 config SOC_IMX6Q
 	bool "i.MX6 Quad support"
+	select ARM_CPU_SUSPEND if PM
 	select ARM_GIC
 	select CPU_V7
 	select HAVE_ARM_SCU
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index d97f409..f5920c2 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -70,4 +70,8 @@ AFLAGS_head-v7.o :=-Wa,-march=armv7-a
 obj-$(CONFIG_SMP) += platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
 obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
-obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o mach-imx6q.o pm-imx6q.o
+obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o mach-imx6q.o
+
+ifeq ($(CONFIG_PM),y)
+obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o
+endif
diff --git a/arch/arm/mach-imx/head-v7.S b/arch/arm/mach-imx/head-v7.S
index 6229efb..7e49deb 100644
--- a/arch/arm/mach-imx/head-v7.S
+++ b/arch/arm/mach-imx/head-v7.S
@@ -16,7 +16,6 @@
 #include <asm/hardware/cache-l2x0.h>
 
 	.section ".text.head", "ax"
-	__CPUINIT
 
 /*
  * The secondary kernel init calls v7_flush_dcache_all before it enables
@@ -33,6 +32,7 @@
  */
 ENTRY(v7_invalidate_l1)
 	mov	r0, #0
+	mcr	p15, 0, r0, c7, c5, 0	@ invalidate I cache
 	mcr	p15, 2, r0, c0, c0, 0
 	mrc	p15, 1, r0, c0, c0, 0
 
@@ -71,6 +71,7 @@ ENTRY(v7_secondary_startup)
 ENDPROC(v7_secondary_startup)
 #endif
 
+#ifdef CONFIG_PM
 /*
  * The following code is located into the .data section.  This is to
  * allow phys_l2x0_saved_regs to be accessed with a relative load
@@ -79,6 +80,7 @@ ENDPROC(v7_secondary_startup)
 	.data
 	.align
 
+#ifdef CONFIG_CACHE_L2X0
 	.macro	pl310_resume
 	ldr	r2, phys_l2x0_saved_regs
 	ldr	r0, [r2, #L2X0_R_PHY_BASE]	@ get physical base of l2x0
@@ -88,12 +90,17 @@ ENDPROC(v7_secondary_startup)
 	str	r1, [r0, #L2X0_CTRL]		@ re-enable L2
 	.endm
 
+	.globl	phys_l2x0_saved_regs
+phys_l2x0_saved_regs:
+        .long   0
+#else
+	.macro	pl310_resume
+	.endm
+#endif
+
 ENTRY(v7_cpu_resume)
 	bl	v7_invalidate_l1
 	pl310_resume
 	b	cpu_resume
 ENDPROC(v7_cpu_resume)
-
-	.globl	phys_l2x0_saved_regs
-phys_l2x0_saved_regs:
-        .long   0
+#endif
diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c
index f20f191..f7b0c2b 100644
--- a/arch/arm/mach-imx/pm-imx6q.c
+++ b/arch/arm/mach-imx/pm-imx6q.c
@@ -64,7 +64,9 @@ void __init imx6q_pm_init(void)
 	 * address of the data structure used by l2x0 core to save registers,
 	 * and later restore the necessary ones in imx6q resume entry.
 	 */
+#ifdef CONFIG_CACHE_L2X0
 	phys_l2x0_saved_regs = __pa(&l2x0_saved_regs);
+#endif
 
 	suspend_set_ops(&imx6q_pm_ops);
 }