diff options
author | Dirk Behme <dirk.behme@de.bosch.com> | 2013-04-26 10:13:56 +0200 |
---|---|---|
committer | Shawn Guo <shawn.guo@linaro.org> | 2013-06-17 15:45:09 +0800 |
commit | b3a9c315378ff811bf34393f2f0a6e8b9ffced3b (patch) | |
tree | efb7315aba99bd79aecf017f1e6786b9415e1480 /arch/arm/mach-imx/mach-imx6q.c | |
parent | 75f83d06c3305e0f0a00e7d141acf8ceef608fe9 (diff) | |
download | op-kernel-dev-b3a9c315378ff811bf34393f2f0a6e8b9ffced3b.zip op-kernel-dev-b3a9c315378ff811bf34393f2f0a6e8b9ffced3b.tar.gz |
ARM: i.MX6: add i.MX6 specific L2 cache configuration
To improve the performance and power consumption add an i.MX6
specific L2 cache initialization.
This configuration is taken from Freescale's kernel patch
"ENGR00153601 [MX6]Adjust L2 cache parameter" [1]
with two additional improvements:
a) The L2X0_POWER_CTRL has only the two bits we set. So no need
to read the register before. Remove the register read done
in Freescale's patch.
b) In the L2X0_PREFETCH_CTRL register, besides the double linefill (bit[30]),
additionally enable the instruction and data prefetch (bit[29-28]).
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
[1] http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/commit/arch/arm/mach-mx6/mm.c?h=imx_3.0.35_12.09.01&id=814656410b40c67a10b25300e51b0477b2bb96d1
Diffstat (limited to 'arch/arm/mach-imx/mach-imx6q.c')
-rw-r--r-- | arch/arm/mach-imx/mach-imx6q.c | 36 |
1 files changed, 35 insertions, 1 deletions
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 5536fd8..ec4b7fc 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -253,10 +253,44 @@ static void __init imx6q_map_io(void) imx_scu_map_io(); } +#ifdef CONFIG_CACHE_L2X0 +static void __init imx6q_init_l2cache(void) +{ + void __iomem *l2x0_base; + struct device_node *np; + unsigned int val; + + np = of_find_compatible_node(NULL, NULL, "arm,pl310-cache"); + if (!np) + goto out; + + l2x0_base = of_iomap(np, 0); + if (!l2x0_base) { + of_node_put(np); + goto out; + } + + /* Configure the L2 PREFETCH and POWER registers */ + val = readl_relaxed(l2x0_base + L2X0_PREFETCH_CTRL); + val |= 0x70800000; + writel_relaxed(val, l2x0_base + L2X0_PREFETCH_CTRL); + val = L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN; + writel_relaxed(val, l2x0_base + L2X0_POWER_CTRL); + + iounmap(l2x0_base); + of_node_put(np); + +out: + l2x0_of_init(0, ~0UL); +} +#else +static inline void imx6q_init_l2cache(void) {} +#endif + static void __init imx6q_init_irq(void) { imx6q_init_revision(); - l2x0_of_init(0, ~0UL); + imx6q_init_l2cache(); imx_src_init(); imx_gpc_init(); irqchip_init(); |