Merge branch 'next/devel' of ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc

* 'next/devel' of ssh://master.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (128 commits)
  ARM: S5P64X0: External Interrupt Support
  ARM: EXYNOS4: Enable MFC on Samsung NURI
  ARM: EXYNOS4: Enable MFC on universal_c210
  ARM: S5PV210: Enable MFC on Goni
  ARM: S5P: Add support for MFC device
  ARM: EXYNOS4: Add support FIMD on SMDKC210
  ARM: EXYNOS4: Add platform device and helper functions for FIMD
  ARM: EXYNOS4: Add resource definition for FIMD
  ARM: EXYNOS4: Change devname for FIMD clkdev
  ARM: SAMSUNG: Add IRQ_I2S0 definition
  ARM: SAMSUNG: Add platform device for idma
  ARM: EXYNOS4: Add more registers to be saved and restored for PM
  ARM: EXYNOS4: Add more register addresses of CMU
  ARM: EXYNOS4: Add platform device for dwmci driver
  ARM: EXYNOS4: configure rtc-s3c on NURI
  ARM: EXYNOS4: configure MAX8903 secondary charger on NURI
  ARM: EXYNOS4: configure ADC on NURI
  ARM: EXYNOS4: configure MAX17042 fuel gauge on NURI
  ARM: EXYNOS4: configure regulators and PMIC(MAX8997) on NURI
  ARM: EXYNOS4: Increase NR_IRQS for devices with more IRQs
  ...

Fix up tons of silly conflicts:
 - arch/arm/mach-davinci/include/mach/psc.h
 - arch/arm/mach-exynos4/Kconfig
 - arch/arm/mach-exynos4/mach-smdkc210.c
 - arch/arm/mach-exynos4/pm.c
 - arch/arm/mach-imx/mm-imx1.c
 - arch/arm/mach-imx/mm-imx21.c
 - arch/arm/mach-imx/mm-imx25.c
 - arch/arm/mach-imx/mm-imx27.c
 - arch/arm/mach-imx/mm-imx31.c
 - arch/arm/mach-imx/mm-imx35.c
 - arch/arm/mach-mx5/mm.c
 - arch/arm/mach-s5pv210/mach-goni.c
 - arch/arm/mm/Kconfig

1 files changed, 55 insertions, 2 deletions

diff --git a/arch/arm/mach-exynos4/platsmp.c b/arch/arm/mach-exynos4/platsmp.c
index b68d5bd..7c2282c 100644
--- a/arch/arm/mach-exynos4/platsmp.c
+++ b/arch/arm/mach-exynos4/platsmp.c
@@ -28,9 +28,12 @@
 
 #include <mach/hardware.h>
 #include <mach/regs-clock.h>
+#include <mach/regs-pmu.h>
 
 extern void exynos4_secondary_startup(void);
 
+#define CPU1_BOOT_REG S5P_VA_SYSRAM
+
 /*
  * control for which core is the next to come out of the secondary
  * boot "holding pen"
@@ -58,6 +61,31 @@ static void __iomem *scu_base_addr(void)
 
 static DEFINE_SPINLOCK(boot_lock);
 
+static void __cpuinit exynos4_gic_secondary_init(void)
+{
+	void __iomem *dist_base = S5P_VA_GIC_DIST +
+				 (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id());
+	void __iomem *cpu_base = S5P_VA_GIC_CPU +
+				(EXYNOS4_GIC_BANK_OFFSET * smp_processor_id());
+	int i;
+
+	/*
+	 * Deal with the banked PPI and SGI interrupts - disable all
+	 * PPI interrupts, ensure all SGI interrupts are enabled.
+	 */
+	__raw_writel(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR);
+	__raw_writel(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET);
+
+	/*
+	 * Set priority on PPI and SGI interrupts
+	 */
+	for (i = 0; i < 32; i += 4)
+		__raw_writel(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4);
+
+	__raw_writel(0xf0, cpu_base + GIC_CPU_PRIMASK);
+	__raw_writel(1, cpu_base + GIC_CPU_CTRL);
+}
+
 void __cpuinit platform_secondary_init(unsigned int cpu)
 {
 	/*
@@ -65,7 +93,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 	 * core (e.g. timer irq), then they will not have been enabled
 	 * for us: do so
 	 */
-	gic_secondary_init(0);
+	exynos4_gic_secondary_init();
 
 	/*
 	 * let the primary processor know we're out of the
@@ -100,16 +128,41 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 */
 	write_pen_release(cpu);
 
+	if (!(__raw_readl(S5P_ARM_CORE1_STATUS) & S5P_CORE_LOCAL_PWR_EN)) {
+		__raw_writel(S5P_CORE_LOCAL_PWR_EN,
+			     S5P_ARM_CORE1_CONFIGURATION);
+
+		timeout = 10;
+
+		/* wait max 10 ms until cpu1 is on */
+		while ((__raw_readl(S5P_ARM_CORE1_STATUS)
+			& S5P_CORE_LOCAL_PWR_EN) != S5P_CORE_LOCAL_PWR_EN) {
+			if (timeout-- == 0)
+				break;
+
+			mdelay(1);
+		}
+
+		if (timeout == 0) {
+			printk(KERN_ERR "cpu1 power enable failed");
+			spin_unlock(&boot_lock);
+			return -ETIMEDOUT;
+		}
+	}
 	/*
 	 * Send the secondary CPU a soft interrupt, thereby causing
 	 * the boot monitor to read the system wide flags register,
 	 * and branch to the address found there.
 	 */
-	gic_raise_softirq(cpumask_of(cpu), 1);
 
 	timeout = jiffies + (1 * HZ);
 	while (time_before(jiffies, timeout)) {
 		smp_rmb();
+
+		__raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)),
+			CPU1_BOOT_REG);
+		gic_raise_softirq(cpumask_of(cpu), 1);
+
 		if (pen_release == -1)
 			break;