Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform changes from Arnd Bergmann:
 "New and updated SoC support, notable changes include:

   - bcm:
        brcmstb SMP support
        initial iproc/cygnus support
   - exynos:
        Exynos4415 SoC support
        PMU and suspend support for Exynos5420
        PMU support for Exynos3250
        pm related maintenance
   - imx:
        new LS1021A SoC support
        vybrid 610 global timer support
   - integrator:
        convert to using multiplatform configuration
   - mediatek:
        earlyprintk support for mt8127/mt8135
   - meson:
        meson8 soc and l2 cache controller support
   - mvebu:
        Armada 38x CPU hotplug support
        drop support for prerelease Armada 375 Z1 stepping
        extended suspend support, now works on Armada 370/XP
   - omap:
        hwmod related maintenance
        prcm cleanup
   - pxa:
        initial pxa27x DT handling
   - rockchip:
        SMP support for rk3288
        add cpu frequency scaling support
   - shmobile:
        r8a7740 power domain support
        various small restart, timer, pci apmu changes
   - sunxi:
        Allwinner A80 (sun9i) earlyprintk support
   - ux500:
        power domain support

  Overall, a significant chunk of changes, coming mostly from the usual
  suspects: omap, shmobile, samsung and mvebu, all of which already
  contain a lot of platform specific code in arch/arm"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (187 commits)
  ARM: mvebu: use the cpufreq-dt platform_data for independent clocks
  soc: integrator: Add terminating entry for integrator_cm_match
  ARM: mvebu: add SDRAM controller description for Armada XP
  ARM: mvebu: adjust mbus controller description on Armada 370/XP
  ARM: mvebu: add suspend/resume DT information for Armada XP GP
  ARM: mvebu: synchronize secondary CPU clocks on resume
  ARM: mvebu: make sure MMU is disabled in armada_370_xp_cpu_resume
  ARM: mvebu: Armada XP GP specific suspend/resume code
  ARM: mvebu: reserve the first 10 KB of each memory bank for suspend/resume
  ARM: mvebu: implement suspend/resume support for Armada XP
  clk: mvebu: add suspend/resume for gatable clocks
  bus: mvebu-mbus: provide a mechanism to save SDRAM window configuration
  bus: mvebu-mbus: suspend/resume support
  clocksource: time-armada-370-xp: add suspend/resume support
  irqchip: armada-370-xp: Add suspend/resume support
  ARM: add lolevel debug support for asm9260
  ARM: add mach-asm9260
  ARM: EXYNOS: use u8 for val[] in struct exynos_pmu_conf
  power: reset: imx-snvs-poweroff: add power off driver for i.mx6
  ARM: imx: temporarily remove CONFIG_SOC_FSL from LS1021A
  ...

1 files changed, 22 insertions, 10 deletions

diff --git a/arch/arm/mach-exynos/mcpm-exynos.c b/arch/arm/mach-exynos/mcpm-exynos.c
index dc9a764..b0d3c2e 100644
--- a/arch/arm/mach-exynos/mcpm-exynos.c
+++ b/arch/arm/mach-exynos/mcpm-exynos.c
@@ -15,6 +15,7 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/of_address.h>
+#include <linux/syscore_ops.h>
 
 #include <asm/cputype.h>
 #include <asm/cp15.h>
@@ -30,6 +31,8 @@
 #define EXYNOS5420_USE_ARM_CORE_DOWN_STATE	BIT(29)
 #define EXYNOS5420_USE_L2_COMMON_UP_STATE	BIT(30)
 
+static void __iomem *ns_sram_base_addr;
+
 /*
  * The common v7_exit_coherency_flush API could not be used because of the
  * Erratum 799270 workaround. This macro is the same as the common one (in
@@ -318,10 +321,26 @@ static const struct of_device_id exynos_dt_mcpm_match[] = {
 	{},
 };
 
+static void exynos_mcpm_setup_entry_point(void)
+{
+	/*
+	 * U-Boot SPL is hardcoded to jump to the start of ns_sram_base_addr
+	 * as part of secondary_cpu_start().  Let's redirect it to the
+	 * mcpm_entry_point(). This is done during both secondary boot-up as
+	 * well as system resume.
+	 */
+	__raw_writel(0xe59f0000, ns_sram_base_addr);     /* ldr r0, [pc, #0] */
+	__raw_writel(0xe12fff10, ns_sram_base_addr + 4); /* bx  r0 */
+	__raw_writel(virt_to_phys(mcpm_entry_point), ns_sram_base_addr + 8);
+}
+
+static struct syscore_ops exynos_mcpm_syscore_ops = {
+	.resume	= exynos_mcpm_setup_entry_point,
+};
+
 static int __init exynos_mcpm_init(void)
 {
 	struct device_node *node;
-	void __iomem *ns_sram_base_addr;
 	unsigned int value, i;
 	int ret;
 
@@ -387,16 +406,9 @@ static int __init exynos_mcpm_init(void)
 		pmu_raw_writel(value, EXYNOS_COMMON_OPTION(i));
 	}
 
-	/*
-	 * U-Boot SPL is hardcoded to jump to the start of ns_sram_base_addr
-	 * as part of secondary_cpu_start().  Let's redirect it to the
-	 * mcpm_entry_point().
-	 */
-	__raw_writel(0xe59f0000, ns_sram_base_addr);     /* ldr r0, [pc, #0] */
-	__raw_writel(0xe12fff10, ns_sram_base_addr + 4); /* bx  r0 */
-	__raw_writel(virt_to_phys(mcpm_entry_point), ns_sram_base_addr + 8);
+	exynos_mcpm_setup_entry_point();
 
-	iounmap(ns_sram_base_addr);
+	register_syscore_ops(&exynos_mcpm_syscore_ops);
 
 	return ret;
 }