Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc board specific changes from Olof Johansson:
 "While we generally attempt to get rid of board specific files and
  replace them with device tree based descriptions, a lot of platforms
  have not come that far:

  In shmobile, we add two new board files because their recently started
  effort to add DT support has not proceeded enough to use it for all of
  the important hardware.

  In Kirkwood, we are adding support for new boards with a combination
  of DT and board file contents in multiple cases.

  pxa/mmp and imx are extending support for existing board files but not
  adding new ones."

Fix up trivial conflicts in arch/arm/mach-{mmp/ttc_dkb.c,shmobile/{Kconfig,Makefile}}

* tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (94 commits)
  ARM: shmobile: fix smp build
  ARM: kirkwood: Add support for RaidSonic IB-NAS6210/6220 using devicetree
  kirkwood: Add iconnect support
  orion/kirkwood: create a generic function for gpio led blinking
  kirkwood/orion: fix orion_gpio_set_blink
  ARM: kirkwood: Define DNS-320/DNS-325 NAND in fdt
  kirkwood: Allow nand to be configured via. devicetree
  mtd: Add orion_nand devicetree bindings
  ARM: kirkwood: Basic support for DNS-320 and DNS-325
  ARM: mach-shmobile: Use DT_MACHINE for armadillo 800 eva
  ARM: mach-shmobile: Use DT_MACHINE for KZM9G
  ARM: pxa: hx4700: Add Synaptics NavPoint touchpad
  ARM: pxa: Use REGULATOR_SUPPLY macro
  ARM: mach-shmobile: kzm9g: enable SMP boot
  ARM: mach-shmobile: kzm9g: defconfig update
  ARM: mach-shmobile: kzm9g: add PCF8757 gpio-key
  ARM: mach-shmobile: kzm9g: add SDHI support
  ARM: mach-shmobile: kzm9g: add MMCIF support
  ARM: mach-shmobile: kzm9g: correct screen direction
  ARM: mach-shmobile: sh73a0.h: add GPIO_NR
  ...

1 files changed, 34 insertions, 1 deletions

diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index 827cb99..26124a3 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -45,6 +45,7 @@
 #include <mach/ohci.h>
 #include <mach/map.h>
 
+#include <drm/exynos_drm.h>
 #include "common.h"
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
@@ -581,6 +582,27 @@ static struct platform_device origen_lcd_hv070wsa = {
 	.dev.platform_data	= &origen_lcd_hv070wsa_data,
 };
 
+#ifdef CONFIG_DRM_EXYNOS
+static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
+	.panel	= {
+		.timing	= {
+			.left_margin	= 64,
+			.right_margin	= 16,
+			.upper_margin	= 64,
+			.lower_margin	= 16,
+			.hsync_len	= 48,
+			.vsync_len	= 3,
+			.xres		= 1024,
+			.yres		= 600,
+		},
+	},
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
+				VIDCON1_INV_VCLK,
+	.default_win	= 0,
+	.bpp		= 32,
+};
+#else
 static struct s3c_fb_pd_win origen_fb_win0 = {
 	.win_mode = {
 		.left_margin	= 64,
@@ -594,6 +616,8 @@ static struct s3c_fb_pd_win origen_fb_win0 = {
 	},
 	.max_bpp		= 32,
 	.default_bpp		= 24,
+	.virtual_x		= 1024,
+	.virtual_y		= 2 * 600,
 };
 
 static struct s3c_fb_platdata origen_lcd_pdata __initdata = {
@@ -603,9 +627,10 @@ static struct s3c_fb_platdata origen_lcd_pdata __initdata = {
 				VIDCON1_INV_VCLK,
 	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
 };
+#endif
 
 /* Bluetooth rfkill gpio platform data */
-struct rfkill_gpio_platform_data origen_bt_pdata = {
+static struct rfkill_gpio_platform_data origen_bt_pdata = {
 	.reset_gpio	= EXYNOS4_GPX2(2),
 	.shutdown_gpio	= -1,
 	.type		= RFKILL_TYPE_BLUETOOTH,
@@ -642,6 +667,9 @@ static struct platform_device *origen_devices[] __initdata = {
 	&s5p_device_mfc_l,
 	&s5p_device_mfc_r,
 	&s5p_device_mixer,
+#ifdef CONFIG_DRM_EXYNOS
+	&exynos_device_drm,
+#endif
 	&exynos4_device_ohci,
 	&origen_device_gpiokeys,
 	&origen_lcd_hv070wsa,
@@ -717,7 +745,12 @@ static void __init origen_machine_init(void)
 	s5p_tv_setup();
 	s5p_i2c_hdmiphy_set_platdata(NULL);
 
+#ifdef CONFIG_DRM_EXYNOS
+	s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
+	exynos4_fimd0_gpio_setup_24bpp();
+#else
 	s5p_fimd0_set_platdata(&origen_lcd_pdata);
+#endif
 
 	platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));