Merge tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC multiplatform code updates from Arnd Bergmann:
 "This branch is the culmination of 5 years of effort to bring the ARMv6
  and ARMv7 platforms together such that they can all be enabled and
  boot the same kernel.  It has been a tremendous amount of cleanup and
  refactoring by a huge number of people, and creation of several new
  (and major) subsystems to better abstract out all the platform details
  in an appropriate manner.

  The bulk of this branch is a large patchset from Arnd that brings
  several of the more minor and older platforms we have closer to
  multiplatform support.  Among these are MMP, S3C64xx, Orion5x, mv78xx0
  and realview Much of this is moving around header files from old mach
  directories, but there are also some cleanup patches of debug_ll
  (lowlevel debug per-platform options) and other parts.

  Linus Walleij also has some patchs to clean up the older ARM Realview
  platforms by finally introducing DT support, and Rob Herring has some
  for ARM Versatile which is now DT-only.  Both of these platforms are
  now multiplatform.

  Finally, a couple of patches from Russell for Dove PMU, and a fix from
  Valentin Rothberg for Exynos ADC, which were rebased on top of the
  series to avoid conflicts"

* tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits)
  ARM: realview: don't select SMP_ON_UP for UP builds
  ARM: s3c: simplify s3c_irqwake_{e,}intallow definition
  ARM: s3c64xx: fix pm-debug compilation
  iio: exynos-adc: fix irqf_oneshot.cocci warnings
  ARM: realview: build realview-dt SMP support only when used
  ARM: realview: select apropriate targets
  ARM: realview: clean up header files
  ARM: realview: make all header files local
  ARM: no longer make CPU targets visible separately
  ARM: integrator: use explicit core module options
  ARM: realview: enable multiplatform
  ARM: make default platform work for NOMMU
  ARM: debug-ll: move DEBUG_LL_UART_EFM32 to correct Kconfig location
  ARM: defconfig: use correct debug_ll settings
  ARM: versatile: convert to multi-platform
  ARM: versatile: merge mach code into a single file
  ARM: versatile: switch to DT only booting and remove legacy code
  ARM: versatile: add DT based PCI detection
  ARM: pxa: mark ezx structures as __maybe_unused
  ARM: pxa: mark raumfeld init functions as __maybe_unused
  ...

1 files changed, 1 insertions, 99 deletions

diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c
index bfb3703..d6627c1 100644
--- a/arch/arm/mach-dove/irq.c
+++ b/arch/arm/mach-dove/irq.c
@@ -7,87 +7,15 @@
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-
-#include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/irq.h>
-#include <linux/gpio.h>
 #include <linux/io.h>
-#include <asm/mach/arch.h>
+#include <asm/exception.h>
 #include <plat/irq.h>
-#include <asm/mach/irq.h>
-#include <mach/pm.h>
 #include <mach/bridge-regs.h>
 #include <plat/orion-gpio.h>
 #include "common.h"
 
-static void pmu_irq_mask(struct irq_data *d)
-{
-	int pin = irq_to_pmu(d->irq);
-	u32 u;
-
-	u = readl(PMU_INTERRUPT_MASK);
-	u &= ~(1 << (pin & 31));
-	writel(u, PMU_INTERRUPT_MASK);
-}
-
-static void pmu_irq_unmask(struct irq_data *d)
-{
-	int pin = irq_to_pmu(d->irq);
-	u32 u;
-
-	u = readl(PMU_INTERRUPT_MASK);
-	u |= 1 << (pin & 31);
-	writel(u, PMU_INTERRUPT_MASK);
-}
-
-static void pmu_irq_ack(struct irq_data *d)
-{
-	int pin = irq_to_pmu(d->irq);
-	u32 u;
-
-	/*
-	 * The PMU mask register is not RW0C: it is RW.  This means that
-	 * the bits take whatever value is written to them; if you write
-	 * a '1', you will set the interrupt.
-	 *
-	 * Unfortunately this means there is NO race free way to clear
-	 * these interrupts.
-	 *
-	 * So, let's structure the code so that the window is as small as
-	 * possible.
-	 */
-	u = ~(1 << (pin & 31));
-	u &= readl_relaxed(PMU_INTERRUPT_CAUSE);
-	writel_relaxed(u, PMU_INTERRUPT_CAUSE);
-}
-
-static struct irq_chip pmu_irq_chip = {
-	.name		= "pmu_irq",
-	.irq_mask	= pmu_irq_mask,
-	.irq_unmask	= pmu_irq_unmask,
-	.irq_ack	= pmu_irq_ack,
-};
-
-static void pmu_irq_handler(struct irq_desc *desc)
-{
-	unsigned long cause = readl(PMU_INTERRUPT_CAUSE);
-	unsigned int irq;
-
-	cause &= readl(PMU_INTERRUPT_MASK);
-	if (cause == 0) {
-		do_bad_IRQ(desc);
-		return;
-	}
-
-	for (irq = 0; irq < NR_PMU_IRQS; irq++) {
-		if (!(cause & (1 << irq)))
-			continue;
-		irq = pmu_to_irq(irq);
-		generic_handle_irq(irq);
-	}
-}
-
 static int __initdata gpio0_irqs[4] = {
 	IRQ_DOVE_GPIO_0_7,
 	IRQ_DOVE_GPIO_8_15,
@@ -109,14 +37,6 @@ static int __initdata gpio2_irqs[4] = {
 	0,
 };
 
-#ifdef CONFIG_MULTI_IRQ_HANDLER
-/*
- * Compiling with both non-DT and DT support enabled, will
- * break asm irq handler used by non-DT boards. Therefore,
- * we provide a C-style irq handler even for non-DT boards,
- * if MULTI_IRQ_HANDLER is set.
- */
-
 static void __iomem *dove_irq_base = IRQ_VIRT_BASE;
 
 static asmlinkage void
@@ -139,18 +59,13 @@ __exception_irq_entry dove_legacy_handle_irq(struct pt_regs *regs)
 		return;
 	}
 }
-#endif
 
 void __init dove_init_irq(void)
 {
-	int i;
-
 	orion_irq_init(1, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
 	orion_irq_init(33, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
 
-#ifdef CONFIG_MULTI_IRQ_HANDLER
 	set_handle_irq(dove_legacy_handle_irq);
-#endif
 
 	/*
 	 * Initialize gpiolib for GPIOs 0-71.
@@ -163,17 +78,4 @@ void __init dove_init_irq(void)
 
 	orion_gpio_init(NULL, 64, 8, DOVE_GPIO2_VIRT_BASE, 0,
 			IRQ_DOVE_GPIO_START + 64, gpio2_irqs);
-
-	/*
-	 * Mask and clear PMU interrupts
-	 */
-	writel(0, PMU_INTERRUPT_MASK);
-	writel(0, PMU_INTERRUPT_CAUSE);
-
-	for (i = IRQ_DOVE_PMU_START; i < NR_IRQS; i++) {
-		irq_set_chip_and_handler(i, &pmu_irq_chip, handle_level_irq);
-		irq_set_status_flags(i, IRQ_LEVEL);
-		irq_clear_status_flags(i, IRQ_NOREQUEST);
-	}
-	irq_set_chained_handler(IRQ_DOVE_PMU, pmu_irq_handler);
 }