summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-davinci
diff options
context:
space:
mode:
authorSergei Shtylyov <sshtylyov@ru.mvista.com>2009-10-30 23:52:04 +0400
committerKevin Hilman <khilman@deeprootsystems.com>2009-11-25 10:21:34 -0800
commitca6a272a4f1c2b81ec062f39cdc02ce7aed26d14 (patch)
treedaa0eab08393f8782f4d4e63cca2212e67451039 /arch/arm/mach-davinci
parentb0ea26e1c8970c1b252a43e6c33555829ba4b0d2 (diff)
downloadop-kernel-dev-ca6a272a4f1c2b81ec062f39cdc02ce7aed26d14.zip
op-kernel-dev-ca6a272a4f1c2b81ec062f39cdc02ce7aed26d14.tar.gz
DA830 EVM: MUSB platform code
Properly set up the OTG mode thru the CFGCHIP2 register, enable the USB0_DRVVBUS pin, and finally register the MUSB platform device. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
Diffstat (limited to 'arch/arm/mach-davinci')
-rw-r--r--arch/arm/mach-davinci/board-da830-evm.c29
1 files changed, 29 insertions, 0 deletions
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index bfa7902..ccf66c7 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -171,8 +171,37 @@ static __init void da830_evm_usb_init(void)
cfgchip2 &= ~CFGCHIP2_USB1PHYCLKMUX;
cfgchip2 |= CFGCHIP2_USB2PHYCLKMUX;
+ /*
+ * We have to override VBUS/ID signals when MUSB is configured into the
+ * host-only mode -- ID pin will float if no cable is connected, so the
+ * controller won't be able to drive VBUS thinking that it's a B-device.
+ * Otherwise, we want to use the OTG mode and enable VBUS comparators.
+ */
+ cfgchip2 &= ~CFGCHIP2_OTGMODE;
+#ifdef CONFIG_USB_MUSB_HOST
+ cfgchip2 |= CFGCHIP2_FORCE_HOST;
+#else
+ cfgchip2 |= CFGCHIP2_SESENDEN | CFGCHIP2_VBDTCTEN;
+#endif
+
__raw_writel(cfgchip2, DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP2_REG));
+ /* USB_REFCLKIN is not used. */
+ ret = davinci_cfg_reg(DA830_USB0_DRVVBUS);
+ if (ret)
+ pr_warning("%s: USB 2.0 PinMux setup failed: %d\n",
+ __func__, ret);
+ else {
+ /*
+ * TPS2065 switch @ 5V supplies 1 A (sustains 1.5 A),
+ * with the power on to power good time of 3 ms.
+ */
+ ret = da8xx_register_usb20(1000, 3);
+ if (ret)
+ pr_warning("%s: USB 2.0 registration failed: %d\n",
+ __func__, ret);
+ }
+
ret = da8xx_pinmux_setup(da830_evm_usb11_pins);
if (ret) {
pr_warning("%s: USB 1.1 PinMux setup failed: %d\n",
OpenPOWER on IntegriCloud