[ARM] 4124/1: Rename mach-at91rm9200 and arch-at91rm9200 directories

Now that Linux includes support for the Atmel AT91SAM9260 and
AT91SAM9261 processors in addition to the original Atmel AT91RM9200
(with support for more AT91 processors pending), the "mach-at91rm9200"
and "arch-at91rm9200" directories should be renamed to indicate their
more generic nature.

The following git commands should be run BEFORE applying this patch:
  git-mv arch/arm/mach-at91rm9200 arch/arm/mach-at91
  git-mv include/asm-arm/arch-at91rm9200 include/asm-arm/arch-at91

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 0 insertions, 145 deletions

diff --git a/arch/arm/mach-at91rm9200/board-csb337.c b/arch/arm/mach-at91rm9200/board-csb337.c
deleted file mode 100644
index b8bb805..0000000
--- a/arch/arm/mach-at91rm9200/board-csb337.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * linux/arch/arm/mach-at91rm9200/board-csb337.c
- *
- *  Copyright (C) 2005 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-
-#include <asm/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-
-#include "generic.h"
-
-
-/*
- * Serial port configuration.
- *    0 .. 3 = USART0 .. USART3
- *    4      = DBGU
- */
-static struct at91_uart_config __initdata csb337_uart_config = {
-	.console_tty	= 0,				/* ttyS0 */
-	.nr_tty		= 2,
-	.tty_map	= { 4, 1, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
-};
-
-static void __init csb337_map_io(void)
-{
-	/* Initialize processor: 3.6864 MHz crystal */
-	at91rm9200_initialize(3686400, AT91RM9200_BGA);
-
-	/* Setup the LEDs */
-	at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
-
-	/* Setup the serial ports and console */
-	at91_init_serial(&csb337_uart_config);
-}
-
-static void __init csb337_init_irq(void)
-{
-	at91rm9200_init_interrupts(NULL);
-}
-
-static struct at91_eth_data __initdata csb337_eth_data = {
-	.phy_irq_pin	= AT91_PIN_PC2,
-	.is_rmii	= 0,
-};
-
-static struct at91_usbh_data __initdata csb337_usbh_data = {
-	.ports		= 2,
-};
-
-static struct at91_udc_data __initdata csb337_udc_data = {
-	// this has no VBUS sensing pin
-	.pullup_pin	= AT91_PIN_PA24,
-};
-
-static struct at91_cf_data __initdata csb337_cf_data = {
-	/*
-	 * connector P4 on the CSB 337 mates to
-	 * connector P8 on the CSB 300CF
-	 */
-
-	/* CSB337 specific */
-	.det_pin	= AT91_PIN_PC3,
-
-	/* CSB300CF specific */
-	.irq_pin	= AT91_PIN_PA19,
-	.vcc_pin	= AT91_PIN_PD0,
-	.rst_pin	= AT91_PIN_PD2,
-};
-
-static struct at91_mmc_data __initdata csb337_mmc_data = {
-	.det_pin	= AT91_PIN_PD5,
-	.slot_b		= 0,
-	.wire4		= 1,
-	.wp_pin		= AT91_PIN_PD6,
-};
-
-static struct spi_board_info csb337_spi_devices[] = {
-	{	/* CAN controller */
-		.modalias	= "sak82c900",
-		.chip_select	= 0,
-		.max_speed_hz	= 6 * 1000 * 1000,
-	},
-};
-
-static void __init csb337_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* Ethernet */
-	at91_add_device_eth(&csb337_eth_data);
-	/* USB Host */
-	at91_add_device_usbh(&csb337_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&csb337_udc_data);
-	/* I2C */
-	at91_add_device_i2c();
-	/* Compact Flash */
-	at91_set_gpio_input(AT91_PIN_PB22, 1);		/* IOIS16 */
-	at91_add_device_cf(&csb337_cf_data);
-	/* SPI */
-	at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
-	/* MMC */
-	at91_add_device_mmc(&csb337_mmc_data);
-}
-
-MACHINE_START(CSB337, "Cogent CSB337")
-	/* Maintainer: Bill Gatliff */
-	.phys_io	= AT91_BASE_SYS,
-	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
-	.timer		= &at91rm9200_timer,
-	.map_io		= csb337_map_io,
-	.init_irq	= csb337_init_irq,
-	.init_machine	= csb337_board_init,
-MACHINE_END