Merge tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Arnd Bergmann:
 "This contains cleanups as preparation for other branches adding new
  features, we pulled 16 branches for 9 platforms into this one.

  Most notable here is the removal of support for ATAGS based OMAP4
  systems.  Since all OMAP4 machines are fully functional with DT based
  booting in 3.10, we can remove a lot of code here.

  Also noteworthy is Maxime Ripard's cleanup of the machine descriptors,
  which means we need no machine descriptors in a lot more cases and can
  boot additional machines by just having the respective device drivers
  enabled."

* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (76 commits)
  ARM: picoxcell: remove .nr_irqs reference
  ARM: s5p64x0: avoid build warning for uncompress.h
  ARM: SAMSUNG: Remove unused plat/regs-watchdog.h header
  ARM: SAMSUNG: Remove legacy watchdog reset code
  ARM: SAMSUNG: Let platforms use the new watchdog reset driver
  ARM: SAMSUNG: Add watchdog reset driver
  ARM: SAMSUNG: Use local definitions of watchdog registers
  watchdog: s3c2410_wdt: Use local register definitions
  ARM: S5P64X0: Use common uncompress.h part for plat-samsung
  ARM: SAMSUNG: Consolidate uncompress subroutine
  ARM: at91: drop rm9200dk board support
  ARM: dts: msm: Fix merge resolution
  ARM: OMAP1: Remove dma.h
  ARM: OMAP1: Remove legacy irda.h and irda setup from board files
  ARM: OMAP1: Remove duplicated DMA channel definitions
  ARM: OMAP1: Remove McBSP DMA channel definitions
  ARM: OMAP2+: Remove dma.h
  ARM: OMAP2+: hwmod: Remove remaining DMA channel definitions
  ARM: OMAP2+: Remove duplicated DMA channel definitions
  ARM: OMAP2+: Remove AES crypto device DMA channel definitions
  ...

4 files changed, 85 insertions, 340 deletions

diff --git a/arch/arm/mach-at91/Kconfig.non_dt b/arch/arm/mach-at91/Kconfig.non_dt
index 6c24985..3a78bdc 100644
--- a/arch/arm/mach-at91/Kconfig.non_dt
+++ b/arch/arm/mach-at91/Kconfig.non_dt
@@ -14,15 +14,11 @@ config ARCH_AT91RM9200
 	select SOC_AT91RM9200
 
 config ARCH_AT91SAM9260
-	bool "AT91SAM9260 or AT91SAM9XE"
+	bool "AT91SAM9260 or AT91SAM9XE or AT91SAM9G20"
 	select SOC_AT91SAM9260
 
 config ARCH_AT91SAM9261
-	bool "AT91SAM9261"
-	select SOC_AT91SAM9261
-
-config ARCH_AT91SAM9G10
-	bool "AT91SAM9G10"
+	bool "AT91SAM9261 or AT91SAM9G10"
 	select SOC_AT91SAM9261
 
 config ARCH_AT91SAM9263
@@ -33,10 +29,6 @@ config ARCH_AT91SAM9RL
 	bool "AT91SAM9RL"
 	select SOC_AT91SAM9RL
 
-config ARCH_AT91SAM9G20
-	bool "AT91SAM9G20"
-	select SOC_AT91SAM9260
-
 config ARCH_AT91SAM9G45
 	bool "AT91SAM9G45"
 	select SOC_AT91SAM9G45
@@ -50,6 +42,14 @@ config ARCH_AT91X40
 
 endchoice
 
+config ARCH_AT91SAM9G20
+	bool
+	select ARCH_AT91SAM9260
+
+config ARCH_AT91SAM9G10
+	bool
+	select ARCH_AT91SAM9261
+
 # ----------------------------------------------------------
 
 if ARCH_AT91RM9200
@@ -62,13 +62,6 @@ config MACH_ONEARM
 	  Select this if you are using Ajeco's 1ARM Single Board Computer.
 	  <http://www.ajeco.fi/>
 
-config ARCH_AT91RM9200DK
-	bool "Atmel AT91RM9200-DK Development board"
-	select HAVE_AT91_DATAFLASH_CARD
-	help
-	  Select this if you are using Atmel's AT91RM9200-DK Development board.
-	  (Discontinued)
-
 config MACH_AT91RM9200EK
 	bool "Atmel AT91RM9200-EK Evaluation Kit"
 	select HAVE_AT91_DATAFLASH_CARD
@@ -207,76 +200,6 @@ config MACH_FLEXIBITY
 	  Select this if you are using Flexibity Connect board
 	  <http://www.flexibity.com>
 
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9261
-
-comment "AT91SAM9261 Board Type"
-
-config MACH_AT91SAM9261EK
-	bool "Atmel AT91SAM9261-EK Evaluation Kit"
-	select HAVE_AT91_DATAFLASH_CARD
-	help
-	  Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
-	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9G10
-
-comment "AT91SAM9G10 Board Type"
-
-config MACH_AT91SAM9G10EK
-	bool "Atmel AT91SAM9G10-EK Evaluation Kit"
-	select HAVE_AT91_DATAFLASH_CARD
-	help
-	  Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
-	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9263
-
-comment "AT91SAM9263 Board Type"
-
-config MACH_AT91SAM9263EK
-	bool "Atmel AT91SAM9263-EK Evaluation Kit"
-	select HAVE_AT91_DATAFLASH_CARD
-	help
-	  Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
-	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
-
-config MACH_USB_A9263
-	bool "CALAO USB-A9263"
-	help
-	  Select this if you are using a Calao Systems USB-A9263.
-	  <http://www.calao-systems.com>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9RL
-
-comment "AT91SAM9RL Board Type"
-
-config MACH_AT91SAM9RLEK
-	bool "Atmel AT91SAM9RL-EK Evaluation Kit"
-	help
-	  Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9G20
-
 comment "AT91SAM9G20 Board Type"
 
 config MACH_AT91SAM9G20EK
@@ -341,17 +264,70 @@ config MACH_USB_A9G20
 	  Select this if you are using a Calao Systems USB-A9G20.
 	  <http://www.calao-systems.com>
 
+config MACH_SNAPPER_9260
+	bool "Bluewater Systems Snapper 9260/9G20 module"
+	help
+	  Select this if you are using the Bluewater Systems Snapper 9260 or
+	  Snapper 9G20 modules.
+	  <http://www.bluewatersys.com/>
 endif
 
-if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
-comment "AT91SAM9260/AT91SAM9G20 boards"
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9261
+
+comment "AT91SAM9261 Board Type"
+
+config MACH_AT91SAM9261EK
+	bool "Atmel AT91SAM9261-EK Evaluation Kit"
+	select HAVE_AT91_DATAFLASH_CARD
+	help
+	  Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
+	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
+
+comment "AT91SAM9G10 Board Type"
+
+config MACH_AT91SAM9G10EK
+	bool "Atmel AT91SAM9G10-EK Evaluation Kit"
+	select HAVE_AT91_DATAFLASH_CARD
+	help
+	  Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
+	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9263
+
+comment "AT91SAM9263 Board Type"
+
+config MACH_AT91SAM9263EK
+	bool "Atmel AT91SAM9263-EK Evaluation Kit"
+	select HAVE_AT91_DATAFLASH_CARD
+	help
+	  Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
+	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
+
+config MACH_USB_A9263
+	bool "CALAO USB-A9263"
+	help
+	  Select this if you are using a Calao Systems USB-A9263.
+	  <http://www.calao-systems.com>
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9RL
+
+comment "AT91SAM9RL Board Type"
+
+config MACH_AT91SAM9RLEK
+	bool "Atmel AT91SAM9RL-EK Evaluation Kit"
+	help
+	  Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
 
-config MACH_SNAPPER_9260
-        bool "Bluewater Systems Snapper 9260/9G20 module"
-        help
-          Select this if you are using the Bluewater Systems Snapper 9260 or
-          Snapper 9G20 modules.
-          <http://www.bluewatersys.com/>
 endif
 
 # ----------------------------------------------------------
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 788562d..07e89b4 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -27,16 +27,13 @@ obj-$(CONFIG_SOC_SAMA5D3)	+= sama5d3.o
 obj-$(CONFIG_ARCH_AT91RM9200)	+= at91rm9200_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9260)	+= at91sam9260_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261_devices.o
-obj-$(CONFIG_ARCH_AT91SAM9G10)	+= at91sam9261_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9263)	+= at91sam9263_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9RL)	+= at91sam9rl_devices.o
-obj-$(CONFIG_ARCH_AT91SAM9G20)	+= at91sam9260_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9G45)	+= at91sam9g45_devices.o
 obj-$(CONFIG_ARCH_AT91X40)	+= at91x40.o at91x40_time.o
 
 # AT91RM9200 board-specific support
 obj-$(CONFIG_MACH_ONEARM)	+= board-1arm.o
-obj-$(CONFIG_ARCH_AT91RM9200DK)	+= board-rm9200dk.o
 obj-$(CONFIG_MACH_AT91RM9200EK)	+= board-rm9200ek.o
 obj-$(CONFIG_MACH_CSB337)	+= board-csb337.o
 obj-$(CONFIG_MACH_CSB637)	+= board-csb637.o
diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c
deleted file mode 100644
index 690541b..0000000
--- a/arch/arm/mach-at91/board-rm9200dk.c
+++ /dev/null
@@ -1,228 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-rm9200dk.c
- *
- *  Copyright (C) 2005 SAN People
- *
- *  Epson S1D framebuffer glue code is:
- *     Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/at91rm9200_mc.h>
-#include <mach/at91_ramc.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-
-
-static void __init dk_init_early(void)
-{
-	/* Initialize processor: 18.432 MHz crystal */
-	at91_initialize(18432000);
-}
-
-static struct macb_platform_data __initdata dk_eth_data = {
-	.phy_irq_pin	= AT91_PIN_PC4,
-	.is_rmii	= 1,
-};
-
-static struct at91_usbh_data __initdata dk_usbh_data = {
-	.ports		= 2,
-	.vbus_pin	= {-EINVAL, -EINVAL},
-	.overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata dk_udc_data = {
-	.vbus_pin	= AT91_PIN_PD4,
-	.pullup_pin	= AT91_PIN_PD5,
-};
-
-static struct at91_cf_data __initdata dk_cf_data = {
-	.irq_pin	= -EINVAL,
-	.det_pin	= AT91_PIN_PB0,
-	.vcc_pin	= -EINVAL,
-	.rst_pin	= AT91_PIN_PC5,
-};
-
-#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
-static struct mci_platform_data __initdata dk_mci0_data = {
-	.slot[0] = {
-		.bus_width	= 4,
-		.detect_pin	= -EINVAL,
-		.wp_pin		= -EINVAL,
-	},
-};
-#endif
-
-static struct spi_board_info dk_spi_devices[] = {
-	{	/* DataFlash chip */
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 0,
-		.max_speed_hz	= 15 * 1000 * 1000,
-	},
-	{	/* UR6HCPS2-SP40 PS2-to-SPI adapter */
-		.modalias	= "ur6hcps2",
-		.chip_select	= 1,
-		.max_speed_hz	= 250 *  1000,
-	},
-	{	/* TLV1504 ADC, 4 channels, 10 bits; one is a temp sensor */
-		.modalias	= "tlv1504",
-		.chip_select	= 2,
-		.max_speed_hz	= 20 * 1000 * 1000,
-	},
-#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
-	{	/* DataFlash card */
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 3,
-		.max_speed_hz	= 15 * 1000 * 1000,
-	}
-#endif
-};
-
-static struct i2c_board_info __initdata dk_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("ics1523", 0x26),
-	},
-	{
-		I2C_BOARD_INFO("x9429", 0x28),
-	},
-	{
-		I2C_BOARD_INFO("24c1024", 0x50),
-	}
-};
-
-static struct mtd_partition __initdata dk_nand_partition[] = {
-	{
-		.name	= "NAND Partition 1",
-		.offset	= 0,
-		.size	= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct atmel_nand_data __initdata dk_nand_data = {
-	.ale		= 22,
-	.cle		= 21,
-	.det_pin	= AT91_PIN_PB1,
-	.rdy_pin	= AT91_PIN_PC2,
-	.enable_pin	= -EINVAL,
-	.ecc_mode	= NAND_ECC_SOFT,
-	.on_flash_bbt	= 1,
-	.parts		= dk_nand_partition,
-	.num_parts	= ARRAY_SIZE(dk_nand_partition),
-};
-
-#define DK_FLASH_BASE	AT91_CHIPSELECT_0
-#define DK_FLASH_SIZE	SZ_2M
-
-static struct physmap_flash_data dk_flash_data = {
-	.width		= 2,
-};
-
-static struct resource dk_flash_resource = {
-	.start		= DK_FLASH_BASE,
-	.end		= DK_FLASH_BASE + DK_FLASH_SIZE - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device dk_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-				.platform_data	= &dk_flash_data,
-			},
-	.resource	= &dk_flash_resource,
-	.num_resources	= 1,
-};
-
-static struct gpio_led dk_leds[] = {
-	{
-		.name			= "led0",
-		.gpio			= AT91_PIN_PB2,
-		.active_low		= 1,
-		.default_trigger	= "heartbeat",
-	}
-};
-
-static void __init dk_board_init(void)
-{
-	/* Serial */
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
-	at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
-			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
-			   | ATMEL_UART_RI);
-	at91_add_device_serial();
-	/* Ethernet */
-	at91_add_device_eth(&dk_eth_data);
-	/* USB Host */
-	at91_add_device_usbh(&dk_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&dk_udc_data);
-	at91_set_multi_drive(dk_udc_data.pullup_pin, 1);	/* pullup_pin is connected to reset */
-	/* Compact Flash */
-	at91_add_device_cf(&dk_cf_data);
-	/* I2C */
-	at91_add_device_i2c(dk_i2c_devices, ARRAY_SIZE(dk_i2c_devices));
-	/* SPI */
-	at91_add_device_spi(dk_spi_devices, ARRAY_SIZE(dk_spi_devices));
-#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
-	/* DataFlash card */
-	at91_set_gpio_output(AT91_PIN_PB7, 0);
-#else
-	/* MMC */
-	at91_set_gpio_output(AT91_PIN_PB7, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
-	at91_add_device_mci(0, &dk_mci0_data);
-#endif
-	/* NAND */
-	at91_add_device_nand(&dk_nand_data);
-	/* NOR Flash */
-	platform_device_register(&dk_flash);
-	/* LEDs */
-	at91_gpio_leds(dk_leds, ARRAY_SIZE(dk_leds));
-	/* VGA */
-//	dk_add_device_video();
-}
-
-MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
-	/* Maintainer: SAN People/Atmel */
-	.init_time	= at91rm9200_timer_init,
-	.map_io		= at91_map_io,
-	.handle_irq	= at91_aic_handle_irq,
-	.init_early	= dk_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= dk_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index b446645..d343762 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -264,11 +264,7 @@ static void __init ek_add_device_ts(void) {}
  */
 static struct at73c213_board_info at73c213_data = {
 	.ssc_id		= 1,
-#if defined(CONFIG_MACH_AT91SAM9261EK)
-	.shortname	= "AT91SAM9261-EK external DAC",
-#else
-	.shortname	= "AT91SAM9G10-EK external DAC",
-#endif
+	.shortname	= "AT91SAM9261/9G10-EK external DAC",
 };
 
 #if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
@@ -412,9 +408,6 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
 	.default_monspecs		= &at91fb_default_stn_monspecs,
 	.atmel_lcdfb_power_control	= at91_lcdc_stn_power_control,
 	.guard_time			= 1,
-#if defined(CONFIG_MACH_AT91SAM9G10EK)
-	.lcd_wiring_mode		= ATMEL_LCDC_WIRING_RGB,
-#endif
 };
 
 #else
@@ -468,9 +461,6 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
 	.default_monspecs		= &at91fb_default_tft_monspecs,
 	.atmel_lcdfb_power_control	= at91_lcdc_tft_power_control,
 	.guard_time			= 1,
-#if defined(CONFIG_MACH_AT91SAM9G10EK)
-	.lcd_wiring_mode		= ATMEL_LCDC_WIRING_RGB,
-#endif
 };
 #endif
 
@@ -574,6 +564,10 @@ static void __init ek_board_init(void)
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 	at91_add_device_serial();
+
+	if (cpu_is_at91sam9g10())
+		ek_lcdc_data.lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB;
+
 	/* USB Host */
 	at91_add_device_usbh(&ek_usbh_data);
 	/* USB Device */
@@ -606,11 +600,17 @@ static void __init ek_board_init(void)
 	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
 }
 
-#if defined(CONFIG_MACH_AT91SAM9261EK)
 MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
-#else
+	/* Maintainer: Atmel */
+	.init_time	= at91sam926x_pit_init,
+	.map_io		= at91_map_io,
+	.handle_irq	= at91_aic_handle_irq,
+	.init_early	= ek_init_early,
+	.init_irq	= at91_init_irq_default,
+	.init_machine	= ek_board_init,
+MACHINE_END
+
 MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK")
-#endif
 	/* Maintainer: Atmel */
 	.init_time	= at91sam926x_pit_init,
 	.map_io		= at91_map_io,