summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-at91
diff options
context:
space:
mode:
authorAndrew Victor <linux@maxim.org.za>2008-04-02 21:50:16 +0100
committerRussell King <rmk+kernel@arm.linux.org.uk>2008-04-04 09:52:22 +0100
commitf5d0f4574fe1584891b5167fb0ba42974af13e49 (patch)
tree4fccf8d0b0945ac8e161bfbf2996428a87cf6fda /arch/arm/mach-at91
parenta3da12229f4f9bee2ed66ac34a54a4e8b74bcbcb (diff)
downloadop-kernel-dev-f5d0f4574fe1584891b5167fb0ba42974af13e49.zip
op-kernel-dev-f5d0f4574fe1584891b5167fb0ba42974af13e49.tar.gz
[ARM] 4906/1: [AT91] SAM9/CAP9 basic power-management
Basic power-management (suspend-to-ram) support for Atmel SAM9 and CAP9 processors. Based on comments & patches from Anti Sullin and David Brownell. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'arch/arm/mach-at91')
-rw-r--r--arch/arm/mach-at91/pm.c91
1 files changed, 75 insertions, 16 deletions
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index a67defd..77d9669 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -26,12 +26,62 @@
#include <asm/mach-types.h>
#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91rm9200_mc.h>
#include <asm/arch/gpio.h>
#include <asm/arch/cpu.h>
#include "generic.h"
+#ifdef CONFIG_ARCH_AT91RM9200
+#include <asm/arch/at91rm9200_mc.h>
+
+/*
+ * The AT91RM9200 goes into self-refresh mode with this command, and will
+ * terminate self-refresh automatically on the next SDRAM access.
+ */
+#define sdram_selfrefresh_enable() at91_sys_write(AT91_SDRAMC_SRR, 1)
+#define sdram_selfrefresh_disable() do {} while (0)
+
+#elif defined(CONFIG_ARCH_AT91CAP9)
+#include <asm/arch/at91cap9_ddrsdr.h>
+
+static u32 saved_lpr;
+
+static inline void sdram_selfrefresh_enable(void)
+{
+ u32 lpr;
+
+ saved_lpr = at91_sys_read(AT91_DDRSDRC_LPR);
+
+ lpr = saved_lpr & ~AT91_DDRSDRC_LPCB;
+ at91_sys_write(AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
+}
+
+#define sdram_selfrefresh_disable() at91_sys_write(AT91_DDRSDRC_LPR, saved_lpr)
+
+#else
+#include <asm/arch/at91sam9_sdramc.h>
+
+static u32 saved_lpr;
+
+static inline void sdram_selfrefresh_enable(void)
+{
+ u32 lpr;
+
+ saved_lpr = at91_sys_read(AT91_SDRAMC_LPR);
+
+ lpr = saved_lpr & ~AT91_SDRAMC_LPCB;
+ at91_sys_write(AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH);
+}
+
+#define sdram_selfrefresh_disable() at91_sys_write(AT91_SDRAMC_LPR, saved_lpr)
+
+/*
+ * FIXME: The AT91SAM9263 has a second EBI controller which may have
+ * additional SDRAM. pm_slowclock.S will require a similar fix.
+ */
+
+#endif
+
static int at91_pm_valid_state(suspend_state_t state)
{
@@ -125,6 +175,11 @@ EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
static void (*slow_clock)(void);
+#ifdef CONFIG_AT91_SLOW_CLOCK
+extern void at91_slow_clock(void);
+extern u32 at91_slow_clock_sz;
+#endif
+
static int at91_pm_enter(suspend_state_t state)
{
@@ -158,11 +213,14 @@ static int at91_pm_enter(suspend_state_t state)
* turning off the main oscillator; reverse on wakeup.
*/
if (slow_clock) {
+#ifdef CONFIG_AT91_SLOW_CLOCK
+ /* copy slow_clock handler to SRAM, and call it */
+ memcpy(slow_clock, at91_slow_clock, at91_slow_clock_sz);
+#endif
slow_clock();
break;
} else {
- /* DEVELOPMENT ONLY */
- pr_info("AT91: PM - no slow clock mode yet ...\n");
+ pr_info("AT91: PM - no slow clock mode enabled ...\n");
/* FALLTHROUGH leaving master clock alone */
}
@@ -175,13 +233,15 @@ static int at91_pm_enter(suspend_state_t state)
case PM_SUSPEND_STANDBY:
/*
* NOTE: the Wait-for-Interrupt instruction needs to be
- * in icache so the SDRAM stays in self-refresh mode until
- * the wakeup IRQ occurs.
+ * in icache so no SDRAM accesses are needed until the
+ * wakeup IRQ occurs and self-refresh is terminated.
*/
asm("b 1f; .align 5; 1:");
asm("mcr p15, 0, r0, c7, c10, 4"); /* drain write buffer */
- at91_sys_write(AT91_SDRAMC_SRR, 1); /* self-refresh mode */
- /* fall though to next state */
+ sdram_selfrefresh_enable();
+ asm("mcr p15, 0, r0, c7, c0, 4"); /* wait for interrupt */
+ sdram_selfrefresh_disable();
+ break;
case PM_SUSPEND_ON:
asm("mcr p15, 0, r0, c7, c0, 4"); /* wait for interrupt */
@@ -196,6 +256,7 @@ static int at91_pm_enter(suspend_state_t state)
at91_sys_read(AT91_AIC_IPR) & at91_sys_read(AT91_AIC_IMR));
error:
+ sdram_selfrefresh_disable();
target_state = PM_SUSPEND_ON;
at91_irq_resume();
at91_gpio_resume();
@@ -220,18 +281,16 @@ static struct platform_suspend_ops at91_pm_ops ={
static int __init at91_pm_init(void)
{
- printk("AT91: Power Management\n");
-
-#ifdef CONFIG_AT91_PM_SLOW_CLOCK
- /* REVISIT allocations of SRAM should be dynamically managed.
- * FIQ handlers and other components will want SRAM/TCM too...
- */
- slow_clock = (void *) (AT91_VA_BASE_SRAM + (3 * SZ_4K));
- memcpy(slow_clock, at91rm9200_slow_clock, at91rm9200_slow_clock_sz);
+#ifdef CONFIG_AT91_SLOW_CLOCK
+ slow_clock = (void *) (AT91_IO_VIRT_BASE - at91_slow_clock_sz);
#endif
- /* Disable SDRAM low-power mode. Cannot be used with self-refresh. */
+ pr_info("AT91: Power Management%s\n", (slow_clock ? " (with slow clock mode)" : ""));
+
+#ifdef CONFIG_ARCH_AT91RM9200
+ /* AT91RM9200 SDRAM low-power mode cannot be used with self-refresh. */
at91_sys_write(AT91_SDRAMC_LPR, 0);
+#endif
suspend_set_ops(&at91_pm_ops);
OpenPOWER on IntegriCloud