[ARM] move include/asm-arm to arch/arm/include/asm

Move platform independent header files to arch/arm/include/asm, leaving
those in asm/arch* and asm/plat* alone.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 116 insertions, 0 deletions

diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
new file mode 100644
index 0000000..6116e48
--- /dev/null
+++ b/arch/arm/include/asm/assembler.h
@@ -0,0 +1,116 @@
+/*
+ *  arch/arm/include/asm/assembler.h
+ *
+ *  Copyright (C) 1996-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  This file contains arm architecture specific defines
+ *  for the different processors.
+ *
+ *  Do not include any C declarations in this file - it is included by
+ *  assembler source.
+ */
+#ifndef __ASSEMBLY__
+#error "Only include this from assembly code"
+#endif
+
+#include <asm/ptrace.h>
+
+/*
+ * Endian independent macros for shifting bytes within registers.
+ */
+#ifndef __ARMEB__
+#define pull            lsr
+#define push            lsl
+#define get_byte_0      lsl #0
+#define get_byte_1	lsr #8
+#define get_byte_2	lsr #16
+#define get_byte_3	lsr #24
+#define put_byte_0      lsl #0
+#define put_byte_1	lsl #8
+#define put_byte_2	lsl #16
+#define put_byte_3	lsl #24
+#else
+#define pull            lsl
+#define push            lsr
+#define get_byte_0	lsr #24
+#define get_byte_1	lsr #16
+#define get_byte_2	lsr #8
+#define get_byte_3      lsl #0
+#define put_byte_0	lsl #24
+#define put_byte_1	lsl #16
+#define put_byte_2	lsl #8
+#define put_byte_3      lsl #0
+#endif
+
+/*
+ * Data preload for architectures that support it
+ */
+#if __LINUX_ARM_ARCH__ >= 5
+#define PLD(code...)	code
+#else
+#define PLD(code...)
+#endif
+
+/*
+ * This can be used to enable code to cacheline align the destination
+ * pointer when bulk writing to memory.  Experiments on StrongARM and
+ * XScale didn't show this a worthwhile thing to do when the cache is not
+ * set to write-allocate (this would need further testing on XScale when WA
+ * is used).
+ *
+ * On Feroceon there is much to gain however, regardless of cache mode.
+ */
+#ifdef CONFIG_CPU_FEROCEON
+#define CALGN(code...) code
+#else
+#define CALGN(code...)
+#endif
+
+/*
+ * Enable and disable interrupts
+ */
+#if __LINUX_ARM_ARCH__ >= 6
+	.macro	disable_irq
+	cpsid	i
+	.endm
+
+	.macro	enable_irq
+	cpsie	i
+	.endm
+#else
+	.macro	disable_irq
+	msr	cpsr_c, #PSR_I_BIT | SVC_MODE
+	.endm
+
+	.macro	enable_irq
+	msr	cpsr_c, #SVC_MODE
+	.endm
+#endif
+
+/*
+ * Save the current IRQ state and disable IRQs.  Note that this macro
+ * assumes FIQs are enabled, and that the processor is in SVC mode.
+ */
+	.macro	save_and_disable_irqs, oldcpsr
+	mrs	\oldcpsr, cpsr
+	disable_irq
+	.endm
+
+/*
+ * Restore interrupt state previously stored in a register.  We don't
+ * guarantee that this will preserve the flags.
+ */
+	.macro	restore_irqs, oldcpsr
+	msr	cpsr_c, \oldcpsr
+	.endm
+
+#define USER(x...)				\
+9999:	x;					\
+	.section __ex_table,"a";		\
+	.align	3;				\
+	.long	9999b,9001f;			\
+	.previous