summaryrefslogtreecommitdiffstats
path: root/arch/arm/common
diff options
context:
space:
mode:
authorAlessandro Rubini <rubini@gnudd.com>2009-07-02 15:28:41 +0100
committerRussell King <rmk+kernel@arm.linux.org.uk>2009-07-02 21:20:43 +0100
commit87e8824b4588076409692b82ef4b1d98f25cd400 (patch)
tree2a825e8251776042164d65c769833a5908b2a8eb /arch/arm/common
parent28d0325ce6e0a52f53d8af687e6427fee59004d3 (diff)
downloadop-kernel-dev-87e8824b4588076409692b82ef4b1d98f25cd400.zip
op-kernel-dev-87e8824b4588076409692b82ef4b1d98f25cd400.tar.gz
[ARM] 5582/1: VIC: support ST-modified version with a split init
The Nomadik SoC (not yet merged) has a modified PL090 VIC cell. This adds support for it by reading the PrimeCell ID at the end of the page and calling a separate init function. Signed-off-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Andrea Gallo <andrea.gallo@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'arch/arm/common')
-rw-r--r--arch/arm/common/vic.c88
1 files changed, 88 insertions, 0 deletions
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index 6ed8983..27714ab 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -259,6 +259,15 @@ static struct irq_chip vic_chip = {
.set_wake = vic_set_wake,
};
+/* The PL190 cell from ARM has been modified by ST, so handle both here */
+static void vik_init_st(void __iomem *base, unsigned int irq_start,
+ u32 vic_sources);
+
+enum vic_vendor {
+ VENDOR_ARM = 0x41,
+ VENDOR_ST = 0x80,
+};
+
/**
* vic_init - initialise a vectored interrupt controller
* @base: iomem base address
@@ -270,6 +279,28 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
u32 vic_sources, u32 resume_sources)
{
unsigned int i;
+ u32 cellid = 0;
+ enum vic_vendor vendor;
+
+ /* Identify which VIC cell this one is, by reading the ID */
+ for (i = 0; i < 4; i++) {
+ u32 addr = ((u32)base & PAGE_MASK) + 0xfe0 + (i * 4);
+ cellid |= (readl(addr) & 0xff) << (8 * i);
+ }
+ vendor = (cellid >> 12) & 0xff;
+ printk(KERN_INFO "VIC @%p: id 0x%08x, vendor 0x%02x\n",
+ base, cellid, vendor);
+
+ switch(vendor) {
+ case VENDOR_ST:
+ vik_init_st(base, irq_start, vic_sources);
+ return;
+ default:
+ printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n");
+ /* fall through */
+ case VENDOR_ARM:
+ break;
+ }
/* Disable all interrupts initially. */
@@ -306,3 +337,60 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
vic_pm_register(base, irq_start, resume_sources);
}
+
+/*
+ * The PL190 cell from ARM has been modified by ST to handle 64 interrupts.
+ * The original cell has 32 interrupts, while the modified one has 64,
+ * replocating two blocks 0x00..0x1f in 0x20..0x3f. In that case
+ * the probe function is called twice, with base set to offset 000
+ * and 020 within the page. We call this "second block".
+ */
+static void __init vik_init_st(void __iomem *base, unsigned int irq_start,
+ u32 vic_sources)
+{
+ unsigned int i;
+ int vic_2nd_block = ((unsigned long)base & ~PAGE_MASK) != 0;
+
+ /* Disable all interrupts initially. */
+
+ writel(0, base + VIC_INT_SELECT);
+ writel(0, base + VIC_INT_ENABLE);
+ writel(~0, base + VIC_INT_ENABLE_CLEAR);
+ writel(0, base + VIC_IRQ_STATUS);
+ writel(0, base + VIC_ITCR);
+ writel(~0, base + VIC_INT_SOFT_CLEAR);
+
+ /*
+ * Make sure we clear all existing interrupts. The vector registers
+ * in this cell are after the second block of general registers,
+ * so we can address them using standard offsets, but only from
+ * the second base address, which is 0x20 in the page
+ */
+ if (vic_2nd_block) {
+ writel(0, base + VIC_PL190_VECT_ADDR);
+ for (i = 0; i < 19; i++) {
+ unsigned int value;
+
+ value = readl(base + VIC_PL190_VECT_ADDR);
+ writel(value, base + VIC_PL190_VECT_ADDR);
+ }
+ /* ST has 16 vectors as well, but we don't enable them by now */
+ for (i = 0; i < 16; i++) {
+ void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
+ writel(0, reg);
+ }
+
+ writel(32, base + VIC_PL190_DEF_VECT_ADDR);
+ }
+
+ for (i = 0; i < 32; i++) {
+ if (vic_sources & (1 << i)) {
+ unsigned int irq = irq_start + i;
+
+ set_irq_chip(irq, &vic_chip);
+ set_irq_chip_data(irq, base);
+ set_irq_handler(irq, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+ }
+ }
+}
OpenPOWER on IntegriCloud