Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree conversions and enablement from Olof Johansson:
 "Continued device tree conversion and enablement across a number of
  platforms; Kirkwood, tegra, i.MX, Exynos, zynq and a couple of other
  smaller series as well.

  ux500 has seen continued conversion for platforms.  Several platforms
  have seen pinctrl-via-devicetree conversions for simpler
  multiplatform.  Tegra is adding data for new devices/drivers, and
  Exynos has a bunch of new bindings and devices added as well.

  So, pretty much the same progression in the right direction as the
  last few releases."

Fix up conflicts as per Olof.

* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (185 commits)
  ARM: ux500: Rename dbx500 cpufreq code to be more generic
  ARM: dts: add missing ux500 device trees
  ARM: ux500: Stop registering the PCM driver from platform code
  ARM: ux500: Move board specific GPIO info out to subordinate DTS files
  ARM: ux500: Disable the MMCI gpio-regulator by default
  ARM: Kirkwood: remove kirkwood_ehci_init() from new boards
  ARM: Kirkwood: Add support LED of OpenBlocks A6
  ARM: Kirkwood: Convert to EHCI via DT for OpenBlocks A6
  ARM: kirkwood: Add NAND partiton map for OpenBlocks A6
  ARM: kirkwood: Add support second I2C bus and RTC on OpenBlocks A6
  ARM: kirkwood: Add support DT of second I2C bus
  ARM: kirkwood: Convert mplcec4 board to pinctrl
  ARM: Kirkwood: Convert km_kirkwood to pinctrl
  ARM: Kirkwood: support 98DX412x kirkwoods with pinctrl
  ARM: Kirkwood: Convert IX2-200 to pinctrl.
  ARM: Kirkwood: Convert lsxl boards to pinctrl.
  ARM: Kirkwood: Convert ib62x0 to pinctrl.
  ARM: Kirkwood: Convert GoFlex Net to pinctrl.
  ARM: Kirkwood: Convert dreamplug to pinctrl.
  ARM: Kirkwood: Convert dockstar to pinctrl.
  ...

83 files changed, 5824 insertions, 392 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index f3f2f80..2af359c 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -34,6 +34,8 @@ dtb-$(CONFIG_ARCH_AT91) += at91sam9x35ek.dtb
 
 dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
 dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb
+dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \
+	da850-evm.dtb
 dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \
 	dove-cubox.dtb \
 	dove-dove-db.dtb
@@ -41,7 +43,10 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
 	exynos4210-smdkv310.dtb \
 	exynos4210-trats.dtb \
 	exynos5250-smdk5250.dtb \
-	exynos5440-ssdk5440.dtb
+	exynos5440-ssdk5440.dtb \
+	exynos4412-smdk4412.dtb \
+	exynos5250-smdk5250.dtb \
+	exynos5250-snow.dtb
 dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
 	ecx-2000.dtb
 dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
@@ -79,16 +84,20 @@ dtb-$(CONFIG_ARCH_MXC) += imx51-babbage.dtb \
 	imx53-qsb.dtb \
 	imx53-smd.dtb \
 	imx6q-arm2.dtb \
+	imx6q-sabreauto.dtb \
 	imx6q-sabrelite.dtb \
 	imx6q-sabresd.dtb
 dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
 	imx23-olinuxino.dtb \
 	imx23-stmp378x_devb.dtb \
+	imx28-apf28.dtb \
+	imx28-apf28dev.dtb \
 	imx28-apx4devkit.dtb \
 	imx28-cfa10036.dtb \
 	imx28-cfa10049.dtb \
 	imx28-evk.dtb \
 	imx28-m28evk.dtb \
+	imx28-sps1.dtb \
 	imx28-tx28.dtb
 dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
 	omap3-beagle.dtb \
@@ -105,7 +114,10 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
 	am335x-bone.dtb
 dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb
 dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
-dtb-$(CONFIG_ARCH_U8500) += snowball.dtb
+dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \
+	hrefprev60.dtb \
+	hrefv60plus.dtb \
+	ccu9540.dtb
 dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
 	r8a7740-armadillo800eva.dtb \
 	sh73a0-kzm9g.dtb \
@@ -137,6 +149,7 @@ dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \
 dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \
 	wm8505-ref.dtb \
 	wm8650-mid.dtb
+dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb
 
 targets += dtbs
 endif
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index b1d3fab..c528b4b 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -479,6 +479,12 @@
 					trigger-external;
 				};
 			};
+
+			watchdog@fffffd40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffd40 0x10>;
+				status = "disabled";
+			};
 		};
 
 		nand0: nand@40000000 {
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index 66106ee..00485e1 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -404,6 +404,12 @@
 				#size-cells = <0>;
 				status = "disabled";
 			};
+
+			watchdog@fffffd40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffd40 0x10>;
+				status = "disabled";
+			};
 		};
 
 		nand0: nand@40000000 {
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 0741cae..485fc395 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -473,6 +473,12 @@
 				#size-cells = <0>;
 				status = "disabled";
 			};
+
+			watchdog@fffffd40 {
+				compatible = "atmel,at91sam9260-wdt";
+				reg = <0xfffffd40 0x10>;
+				status = "disabled";
+			};
 		};
 
 		nand0: nand@40000000 {
diff --git a/arch/arm/boot/dts/ccu9540.dts b/arch/arm/boot/dts/ccu9540.dts
new file mode 100644
index 0000000..0430546
--- /dev/null
+++ b/arch/arm/boot/dts/ccu9540.dts
@@ -0,0 +1,72 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "dbx5x0.dtsi"
+
+/ {
+	model = "ST-Ericsson CCU9540 platform with Device Tree";
+	compatible = "st-ericsson,ccu9540", "st-ericsson,u9540";
+
+	memory {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	soc-u9500 {
+		uart@80120000 {
+			status = "okay";
+		};
+
+		uart@80121000 {
+			status = "okay";
+		};
+
+		uart@80007000 {
+			status = "okay";
+		};
+
+		// External Micro SD slot
+		sdi0_per1@80126000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <100000000>;
+			bus-width = <4>;
+			mmc-cap-sd-highspeed;
+			mmc-cap-mmc-highspeed;
+			vmmc-supply = <&ab8500_ldo_aux3_reg>;
+
+			cd-gpios  = <&gpio7 6 0x4>; // 230
+			cd-inverted;
+
+			status = "okay";
+		};
+
+
+		// WLAN SDIO channel
+		sdi1_per2@80118000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <4>;
+
+			status = "okay";
+		};
+
+		// On-board eMMC
+		sdi4_per2@80114000 {
+			arm,primecell-periphid = <0x10480180>;
+		        max-frequency = <100000000>;
+			bus-width = <8>;
+			mmc-cap-mmc-highspeed;
+			vmmc-supply = <&ab8500_ldo_aux2_reg>;
+
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi
new file mode 100644
index 0000000..fddd174
--- /dev/null
+++ b/arch/arm/boot/dts/cros5250-common.dtsi
@@ -0,0 +1,184 @@
+/*
+ * Common device tree include for all Exynos 5250 boards based off of Daisy.
+ *
+ * Copyright (c) 2012 Google, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/ {
+	aliases {
+	};
+
+	memory {
+		reg = <0x40000000 0x80000000>;
+	};
+
+	chosen {
+	};
+
+	i2c@12C60000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <378000>;
+		gpios = <&gpb3 0 2 3 0>,
+			<&gpb3 1 2 3 0>;
+	};
+
+	i2c@12C70000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <378000>;
+		gpios = <&gpb3 2 2 3 0>,
+			<&gpb3 3 2 3 0>;
+	};
+
+	i2c@12C80000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <66000>;
+
+		/*
+		 * Disabled pullups since external part has its own pullups and
+		 * double-pulling gets us out of spec in some cases.
+		 */
+		gpios = <&gpa0 6 3 0 0>,
+			<&gpa0 7 3 0 0>;
+
+		hdmiddc@50 {
+			compatible = "samsung,exynos5-hdmiddc";
+			reg = <0x50>;
+		};
+	};
+
+	i2c@12C90000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <66000>;
+		gpios = <&gpa1 2 3 3 0>,
+			<&gpa1 3 3 3 0>;
+	};
+
+	i2c@12CA0000 {
+		status = "disabled";
+	};
+
+	i2c@12CB0000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <66000>;
+		gpios = <&gpa2 2 3 3 0>,
+			<&gpa2 3 3 3 0>;
+	};
+
+	i2c@12CC0000 {
+		status = "disabled";
+	};
+
+	i2c@12CD0000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <66000>;
+		gpios = <&gpb2 2 3 3 0>,
+			<&gpb2 3 3 3 0>;
+	};
+
+	i2c@12CE0000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <378000>;
+
+		hdmiphy@38 {
+			compatible = "samsung,exynos5-hdmiphy";
+			reg = <0x38>;
+		};
+	};
+
+	dwmmc0@12200000 {
+		num-slots = <1>;
+		supports-highspeed;
+		broken-cd;
+		fifo-depth = <0x80>;
+		card-detect-delay = <200>;
+		samsung,dw-mshc-ciu-div = <3>;
+		samsung,dw-mshc-sdr-timing = <2 3 3>;
+		samsung,dw-mshc-ddr-timing = <1 2 3>;
+
+		slot@0 {
+			reg = <0>;
+			bus-width = <8>;
+			gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>,
+				<&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>,
+				<&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>,
+				<&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>,
+				<&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>;
+		};
+	};
+
+	dwmmc1@12210000 {
+		status = "disabled";
+	};
+
+	dwmmc2@12220000 {
+		num-slots = <1>;
+		supports-highspeed;
+		fifo-depth = <0x80>;
+		card-detect-delay = <200>;
+		samsung,dw-mshc-ciu-div = <3>;
+		samsung,dw-mshc-sdr-timing = <2 3 3>;
+		samsung,dw-mshc-ddr-timing = <1 2 3>;
+
+		slot@0 {
+			reg = <0>;
+			bus-width = <4>;
+			samsung,cd-pinmux-gpio = <&gpc3 2 2 3 3>;
+			wp-gpios = <&gpc2 1 0 0 3>;
+			gpios = <&gpc3 0 2 0 3>, <&gpc3 1 2 0 3>,
+				<&gpc3 3 2 3 3>, <&gpc3 4 2 3 3>,
+				<&gpc3 5 2 3 3>, <&gpc3 6 2 3 3>;
+		};
+	};
+
+	dwmmc3@12230000 {
+		num-slots = <1>;
+		supports-highspeed;
+		broken-cd;
+		fifo-depth = <0x80>;
+		card-detect-delay = <200>;
+		samsung,dw-mshc-ciu-div = <3>;
+		samsung,dw-mshc-sdr-timing = <2 3 3>;
+		samsung,dw-mshc-ddr-timing = <1 2 3>;
+
+		slot@0 {
+			reg = <0>;
+			bus-width = <4>;
+			/* See board-specific dts files for GPIOs */
+		};
+	};
+
+	spi_0: spi@12d20000 {
+		status = "disabled";
+	};
+
+	spi_1: spi@12d30000 {
+		gpios = <&gpa2 4 2 3 0>,
+			<&gpa2 6 2 3 0>,
+			<&gpa2 7 2 3 0>;
+		samsung,spi-src-clk = <0>;
+		num-cs = <1>;
+	};
+
+	spi_2: spi@12d40000 {
+		status = "disabled";
+	};
+
+	hdmi {
+		hpd-gpio = <&gpx3 7 0xf 1 3>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			label = "Power";
+			gpios = <&gpx1 3 0 0x10000 0>;
+			linux,code = <116>; /* KEY_POWER */
+			gpio-key,wakeup;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index 731086b..0d69322 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -217,123 +217,103 @@
 				// DB8500_REGULATOR_VAPE
 				db8500_vape_reg: db8500_vape {
 					regulator-compatible = "db8500_vape";
-					regulator-name = "db8500-vape";
 					regulator-always-on;
 				};
 
 				// DB8500_REGULATOR_VARM
 				db8500_varm_reg: db8500_varm {
 					regulator-compatible = "db8500_varm";
-					regulator-name = "db8500-varm";
 				};
 
 				// DB8500_REGULATOR_VMODEM
 				db8500_vmodem_reg: db8500_vmodem {
 					regulator-compatible = "db8500_vmodem";
-					regulator-name = "db8500-vmodem";
 				};
 
 				// DB8500_REGULATOR_VPLL
 				db8500_vpll_reg: db8500_vpll {
 					regulator-compatible = "db8500_vpll";
-					regulator-name = "db8500-vpll";
 				};
 
 				// DB8500_REGULATOR_VSMPS1
 				db8500_vsmps1_reg: db8500_vsmps1 {
 					regulator-compatible = "db8500_vsmps1";
-					regulator-name = "db8500-vsmps1";
 				};
 
 				// DB8500_REGULATOR_VSMPS2
 				db8500_vsmps2_reg: db8500_vsmps2 {
 					regulator-compatible = "db8500_vsmps2";
-					regulator-name = "db8500-vsmps2";
 				};
 
 				// DB8500_REGULATOR_VSMPS3
 				db8500_vsmps3_reg: db8500_vsmps3 {
 					regulator-compatible = "db8500_vsmps3";
-					regulator-name = "db8500-vsmps3";
 				};
 
 				// DB8500_REGULATOR_VRF1
 				db8500_vrf1_reg: db8500_vrf1 {
 					regulator-compatible = "db8500_vrf1";
-					regulator-name = "db8500-vrf1";
 				};
 
 				// DB8500_REGULATOR_SWITCH_SVAMMDSP
 				db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
 					regulator-compatible = "db8500_sva_mmdsp";
-					regulator-name = "db8500-sva-mmdsp";
 				};
 
 				// DB8500_REGULATOR_SWITCH_SVAMMDSPRET
 				db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
 					regulator-compatible = "db8500_sva_mmdsp_ret";
-					regulator-name = "db8500-sva-mmdsp-ret";
 				};
 
 				// DB8500_REGULATOR_SWITCH_SVAPIPE
 				db8500_sva_pipe_reg: db8500_sva_pipe {
 					regulator-compatible = "db8500_sva_pipe";
-					regulator-name = "db8500_sva_pipe";
 				};
 
 				// DB8500_REGULATOR_SWITCH_SIAMMDSP
 				db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
 					regulator-compatible = "db8500_sia_mmdsp";
-					regulator-name = "db8500_sia_mmdsp";
 				};
 
 				// DB8500_REGULATOR_SWITCH_SIAMMDSPRET
 				db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
-					regulator-name = "db8500-sia-mmdsp-ret";
 				};
 
 				// DB8500_REGULATOR_SWITCH_SIAPIPE
 				db8500_sia_pipe_reg: db8500_sia_pipe {
 					regulator-compatible = "db8500_sia_pipe";
-					regulator-name = "db8500-sia-pipe";
 				};
 
 				// DB8500_REGULATOR_SWITCH_SGA
 				db8500_sga_reg: db8500_sga {
 					regulator-compatible = "db8500_sga";
-					regulator-name = "db8500-sga";
 					vin-supply = <&db8500_vape_reg>;
 				};
 
 				// DB8500_REGULATOR_SWITCH_B2R2_MCDE
 				db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
 					regulator-compatible = "db8500_b2r2_mcde";
-					regulator-name = "db8500-b2r2-mcde";
 					vin-supply = <&db8500_vape_reg>;
 				};
 
 				// DB8500_REGULATOR_SWITCH_ESRAM12
 				db8500_esram12_reg: db8500_esram12 {
 					regulator-compatible = "db8500_esram12";
-					regulator-name = "db8500-esram12";
 				};
 
 				// DB8500_REGULATOR_SWITCH_ESRAM12RET
 				db8500_esram12_ret_reg: db8500_esram12_ret {
 					regulator-compatible = "db8500_esram12_ret";
-					regulator-name = "db8500-esram12-ret";
 				};
 
 				// DB8500_REGULATOR_SWITCH_ESRAM34
 				db8500_esram34_reg: db8500_esram34 {
 					regulator-compatible = "db8500_esram34";
-					regulator-name = "db8500-esram34";
 				};
 
 				// DB8500_REGULATOR_SWITCH_ESRAM34RET
 				db8500_esram34_ret_reg: db8500_esram34_ret {
 					regulator-compatible = "db8500_esram34_ret";
-					regulator-name = "db8500-esram34-ret";
 				};
 			};
 
@@ -412,7 +392,6 @@
 					// supplies to the display/camera
 					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
 						regulator-compatible = "ab8500_ldo_aux1";
-						regulator-name = "V-DISPLAY";
 						regulator-min-microvolt = <2500000>;
 						regulator-max-microvolt = <2900000>;
 						regulator-boot-on;
@@ -423,7 +402,6 @@
 					// supplies to the on-board eMMC
 					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
 						regulator-compatible = "ab8500_ldo_aux2";
-						regulator-name = "V-eMMC1";
 						regulator-min-microvolt = <1100000>;
 						regulator-max-microvolt = <3300000>;
 					};
@@ -431,7 +409,6 @@
 					// supply for VAUX3; SDcard slots
 					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
 						regulator-compatible = "ab8500_ldo_aux3";
-						regulator-name = "V-MMC-SD";
 						regulator-min-microvolt = <1100000>;
 						regulator-max-microvolt = <3300000>;
 					};
@@ -439,49 +416,41 @@
 					// supply for v-intcore12; VINTCORE12 LDO
 					ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
 						regulator-compatible = "ab8500_ldo_initcore";
-						regulator-name = "V-INTCORE";
 					};
 
 					// supply for tvout; gpadc; TVOUT LDO
 					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
 						regulator-compatible = "ab8500_ldo_tvout";
-						regulator-name = "V-TVOUT";
 					};
 
 					// supply for ab8500-usb; USB LDO
 					ab8500_ldo_usb_reg: ab8500_ldo_usb {
 						regulator-compatible = "ab8500_ldo_usb";
-						regulator-name = "dummy";
 					};
 
 					// supply for ab8500-vaudio; VAUDIO LDO
 					ab8500_ldo_audio_reg: ab8500_ldo_audio {
 						regulator-compatible = "ab8500_ldo_audio";
-						regulator-name = "V-AUD";
 					};
 
 					// supply for v-anamic1 VAMic1-LDO
 					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
 						regulator-compatible = "ab8500_ldo_anamic1";
-						regulator-name = "V-AMIC1";
 					};
 
 					// supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1
 					ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
 						regulator-compatible = "ab8500_ldo_amamic2";
-						regulator-name = "V-AMIC2";
 					};
 
 					// supply for v-dmic; VDMIC LDO
 					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
 						regulator-compatible = "ab8500_ldo_dmic";
-						regulator-name = "V-DMIC";
 					};
 
 					// supply for U8500 CSI/DSI; VANA LDO
 					ab8500_ldo_ana_reg: ab8500_ldo_ana {
 						regulator-compatible = "ab8500_ldo_ana";
-						regulator-name = "V-CSI/DSI";
 					};
 				};
 			};
@@ -585,42 +554,42 @@
 			status = "disabled";
 		};
 
-		sdi@80126000 {
+		sdi0_per1@80126000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80126000 0x1000>;
 			interrupts = <0 60 0x4>;
 			status = "disabled";
 		};
 
-		sdi@80118000 {
+		sdi1_per2@80118000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80118000 0x1000>;
 			interrupts = <0 50 0x4>;
 			status = "disabled";
 		};
 
-		sdi@80005000 {
+		sdi2_per3@80005000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80005000 0x1000>;
 			interrupts = <0 41 0x4>;
 			status = "disabled";
 		};
 
-		sdi@80119000 {
+		sdi3_per2@80119000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80119000 0x1000>;
 			interrupts = <0 59 0x4>;
 			status = "disabled";
 		};
 
-		sdi@80114000 {
+		sdi4_per2@80114000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80114000 0x1000>;
 			interrupts = <0 99 0x4>;
 			status = "disabled";
 		};
 
-		sdi@80008000 {
+		sdi5_per3@80008000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x80008000 0x1000>;
 			interrupts = <0 100 0x4>;
@@ -674,5 +643,18 @@
 			status = "disabled";
 		 };
 
+		vmmci: regulator-gpio {
+			compatible = "regulator-gpio";
+
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2600000>;
+			regulator-name = "mmci-reg";
+			regulator-type = "voltage";
+
+			states = <1800000 0x1
+				  2900000 0x0>;
+
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
index 0adbd5a..fed7d3f 100644
--- a/arch/arm/boot/dts/dove-cubox.dts
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -40,3 +40,13 @@
 		reg = <0>;
 	};
 };
+
+&pinctrl {
+	pinctrl-0 = <&pmx_gpio_18>;
+	pinctrl-names = "default";
+
+	pmx_gpio_18: pmx-gpio-18 {
+		marvell,pins = "mpp18";
+		marvell,function = "gpio";
+	};
+};
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 5a00022..61f3914 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -4,6 +4,12 @@
 	compatible = "marvell,dove";
 	model = "Marvell Armada 88AP510 SoC";
 
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+	};
+
 	soc@f1000000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -72,7 +78,8 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 			reg = <0xd0400 0x20>;
-			ngpio = <32>;
+			ngpios = <32>;
+			interrupt-controller;
 			interrupts = <12>, <13>, <14>, <60>;
 		};
 
@@ -81,7 +88,8 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 			reg = <0xd0420 0x20>;
-			ngpio = <32>;
+			ngpios = <32>;
+			interrupt-controller;
 			interrupts = <61>;
 		};
 
@@ -90,7 +98,12 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 			reg = <0xe8400 0x0c>;
-			ngpio = <8>;
+			ngpios = <8>;
+		};
+
+		pinctrl: pinctrl@d0200 {
+			compatible = "marvell,dove-pinctrl";
+			reg = <0xd0200 0x10>;
 		};
 
 		spi0: spi@10600 {
diff --git a/arch/arm/boot/dts/evk-pro3.dts b/arch/arm/boot/dts/evk-pro3.dts
index b7354e6..96e50f5 100644
--- a/arch/arm/boot/dts/evk-pro3.dts
+++ b/arch/arm/boot/dts/evk-pro3.dts
@@ -22,10 +22,22 @@
 				status = "okay";
 			};
 
+			usart0: serial@fffb0000 {
+				status = "okay";
+			};
+
+			usart2: serial@fffb8000 {
+				status = "okay";
+			};
+
 			usb1: gadget@fffa4000 {
 				atmel,vbus-gpio = <&pioC 5 0>;
 				status = "okay";
 			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
 		};
 
 		usb0: ohci@00500000 {
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 96d4462..e1347fc 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -28,6 +28,44 @@
 		spi0 = &spi_0;
 		spi1 = &spi_1;
 		spi2 = &spi_2;
+		i2c0 = &i2c_0;
+		i2c1 = &i2c_1;
+		i2c2 = &i2c_2;
+		i2c3 = &i2c_3;
+		i2c4 = &i2c_4;
+		i2c5 = &i2c_5;
+		i2c6 = &i2c_6;
+		i2c7 = &i2c_7;
+	};
+
+	pd_mfc: mfc-power-domain@10023C40 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10023C40 0x20>;
+	};
+
+	pd_g3d: g3d-power-domain@10023C60 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10023C60 0x20>;
+	};
+
+	pd_lcd0: lcd0-power-domain@10023C80 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10023C80 0x20>;
+	};
+
+	pd_tv: tv-power-domain@10023C20 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10023C20 0x20>;
+	};
+
+	pd_cam: cam-power-domain@10023C00 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10023C00 0x20>;
+	};
+
+	pd_gps: gps-power-domain@10023CE0 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10023CE0 0x20>;
 	};
 
 	gic:interrupt-controller@10490000 {
@@ -121,7 +159,7 @@
 		status = "disabled";
 	};
 
-	i2c@13860000 {
+	i2c_0: i2c@13860000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "samsung,s3c2440-i2c";
@@ -130,7 +168,7 @@
 		status = "disabled";
 	};
 
-	i2c@13870000 {
+	i2c_1: i2c@13870000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "samsung,s3c2440-i2c";
@@ -139,7 +177,7 @@
 		status = "disabled";
 	};
 
-	i2c@13880000 {
+	i2c_2: i2c@13880000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "samsung,s3c2440-i2c";
@@ -148,7 +186,7 @@
 		status = "disabled";
 	};
 
-	i2c@13890000 {
+	i2c_3: i2c@13890000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "samsung,s3c2440-i2c";
@@ -157,7 +195,7 @@
 		status = "disabled";
 	};
 
-	i2c@138A0000 {
+	i2c_4: i2c@138A0000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "samsung,s3c2440-i2c";
@@ -166,7 +204,7 @@
 		status = "disabled";
 	};
 
-	i2c@138B0000 {
+	i2c_5: i2c@138B0000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "samsung,s3c2440-i2c";
@@ -175,7 +213,7 @@
 		status = "disabled";
 	};
 
-	i2c@138C0000 {
+	i2c_6: i2c@138C0000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "samsung,s3c2440-i2c";
@@ -184,7 +222,7 @@
 		status = "disabled";
 	};
 
-	i2c@138D0000 {
+	i2c_7: i2c@138D0000 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "samsung,s3c2440-i2c";
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index 3e68f52..f271001 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -22,38 +22,54 @@
 	compatible = "insignal,origen", "samsung,exynos4210";
 
 	memory {
-		reg = <0x40000000 0x40000000>;
+		reg = <0x40000000 0x10000000
+		       0x50000000 0x10000000
+		       0x60000000 0x10000000
+		       0x70000000 0x10000000>;
 	};
 
 	chosen {
 		bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
 	};
 
+	mmc_reg: voltage-regulator {
+	        compatible = "regulator-fixed";
+		regulator-name = "VMEM_VDD_2.8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpx1 1 0>;
+		enable-active-high;
+	};
+
 	sdhci@12530000 {
-		samsung,sdhci-bus-width = <4>;
-		linux,mmc_cap_4_bit_data;
-		samsung,sdhci-cd-internal;
-		gpio-cd = <&gpk2 2 2 3 3>;
-		gpios = <&gpk2 0 2 0 3>,
-			<&gpk2 1 2 0 3>,
-			<&gpk2 3 2 3 3>,
-			<&gpk2 4 2 3 3>,
-			<&gpk2 5 2 3 3>,
-			<&gpk2 6 2 3 3>;
+		bus-width = <4>;
+		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
+		pinctrl-names = "default";
+		vmmc-supply = <&mmc_reg>;
 		status = "okay";
 	};
 
 	sdhci@12510000 {
-		samsung,sdhci-bus-width = <4>;
-		linux,mmc_cap_4_bit_data;
-		samsung,sdhci-cd-internal;
-		gpio-cd = <&gpk0 2 2 3 3>;
-		gpios = <&gpk0 0 2 0 3>,
-			<&gpk0 1 2 0 3>,
-			<&gpk0 3 2 3 3>,
-			<&gpk0 4 2 3 3>,
-			<&gpk0 5 2 3 3>,
-			<&gpk0 6 2 3 3>;
+		bus-width = <4>;
+		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>;
+		pinctrl-names = "default";
+		vmmc-supply = <&mmc_reg>;
+		status = "okay";
+	};
+
+	serial@13800000 {
+		status = "okay";
+	};
+
+	serial@13810000 {
+		status = "okay";
+	};
+
+	serial@13820000 {
+		status = "okay";
+	};
+
+	serial@13830000 {
 		status = "okay";
 	};
 
@@ -64,35 +80,35 @@
 
 		up {
 			label = "Up";
-			gpios = <&gpx2 0 0 0x10000 2>;
+			gpios = <&gpx2 0 1>;
 			linux,code = <103>;
 			gpio-key,wakeup;
 		};
 
 		down {
 			label = "Down";
-			gpios = <&gpx2 1 0 0x10000 2>;
+			gpios = <&gpx2 1 1>;
 			linux,code = <108>;
 			gpio-key,wakeup;
 		};
 
 		back {
 			label = "Back";
-			gpios = <&gpx1 7 0 0x10000 2>;
+			gpios = <&gpx1 7 1>;
 			linux,code = <158>;
 			gpio-key,wakeup;
 		};
 
 		home {
 			label = "Home";
-			gpios = <&gpx1 6 0 0x10000 2>;
+			gpios = <&gpx1 6 1>;
 			linux,code = <102>;
 			gpio-key,wakeup;
 		};
 
 		menu {
 			label = "Menu";
-			gpios = <&gpx1 5 0 0x10000 2>;
+			gpios = <&gpx1 5 1>;
 			linux,code = <139>;
 			gpio-key,wakeup;
 		};
@@ -101,7 +117,7 @@
 	leds {
 		compatible = "gpio-leds";
 		status {
-			gpios = <&gpx1 3 0 0x10000 2>;
+			gpios = <&gpx1 3 1>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
index 6a4a1a0..55a2efb 100644
--- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
@@ -482,196 +482,196 @@
 			samsung,pins = "gpk0-0";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd0_cmd: sd0-cmd {
 			samsung,pins = "gpk0-1";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd0_cd: sd0-cd {
 			samsung,pins = "gpk0-2";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd0_bus1: sd0-bus-width1 {
 			samsung,pins = "gpk0-3";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd0_bus4: sd0-bus-width4 {
 			samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd0_bus8: sd0-bus-width8 {
 			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd4_clk: sd4-clk {
 			samsung,pins = "gpk0-0";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd4_cmd: sd4-cmd {
 			samsung,pins = "gpk0-1";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd4_cd: sd4-cd {
 			samsung,pins = "gpk0-2";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd4_bus1: sd4-bus-width1 {
 			samsung,pins = "gpk0-3";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd4_bus4: sd4-bus-width4 {
 			samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd4_bus8: sd4-bus-width8 {
 			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <4>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd1_clk: sd1-clk {
 			samsung,pins = "gpk1-0";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd1_cmd: sd1-cmd {
 			samsung,pins = "gpk1-1";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd1_cd: sd1-cd {
 			samsung,pins = "gpk1-2";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd1_bus1: sd1-bus-width1 {
 			samsung,pins = "gpk1-3";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd1_bus4: sd1-bus-width4 {
 			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd2_clk: sd2-clk {
 			samsung,pins = "gpk2-0";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd2_cmd: sd2-cmd {
 			samsung,pins = "gpk2-1";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd2_cd: sd2-cd {
 			samsung,pins = "gpk2-2";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd2_bus1: sd2-bus-width1 {
 			samsung,pins = "gpk2-3";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd2_bus4: sd2-bus-width4 {
 			samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd2_bus8: sd2-bus-width8 {
 			samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
 			samsung,pin-function = <3>;
 			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd3_clk: sd3-clk {
 			samsung,pins = "gpk3-0";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd3_cmd: sd3-cmd {
 			samsung,pins = "gpk3-1";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd3_cd: sd3-cd {
 			samsung,pins = "gpk3-2";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd3_bus1: sd3-bus-width1 {
 			samsung,pins = "gpk3-3";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		sd3_bus4: sd3-bus-width4 {
 			samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
 			samsung,pin-function = <2>;
 			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
+			samsung,pin-drv = <3>;
 		};
 
 		eint0: ext-int0 {
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index 63610c3..9b23a82 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -43,6 +43,22 @@
 		status = "okay";
 	};
 
+	serial@13800000 {
+		status = "okay";
+	};
+
+	serial@13810000 {
+		status = "okay";
+	};
+
+	serial@13820000 {
+		status = "okay";
+	};
+
+	serial@13830000 {
+		status = "okay";
+	};
+
 	keypad@100A0000 {
 		samsung,keypad-num-rows = <2>;
 		samsung,keypad-num-columns = <8>;
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index a21511c..c346b64 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -35,24 +35,15 @@
 		regulator-name = "VMEM_VDD_2.8V";
 		regulator-min-microvolt = <2800000>;
 		regulator-max-microvolt = <2800000>;
-		gpio = <&gpk0 2 1 0 0>;
+		gpio = <&gpk0 2 0>;
 		enable-active-high;
 	};
 
 	sdhci_emmc: sdhci@12510000 {
 		bus-width = <8>;
 		non-removable;
-		broken-voltage;
-		gpios = <&gpk0 0 2 0 3>,
-			<&gpk0 1 2 0 3>,
-			<&gpk0 3 2 2 3>,
-			<&gpk0 4 2 2 3>,
-			<&gpk0 5 2 2 3>,
-			<&gpk0 6 2 2 3>,
-			<&gpk1 3 3 3 3>,
-			<&gpk1 4 3 3 3>,
-			<&gpk1 5 3 3 3>,
-			<&gpk1 6 3 3 3>;
+		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
+		pinctrl-names = "default";
 		vmmc-supply = <&vemmc_reg>;
 		status = "okay";
 	};
@@ -73,12 +64,74 @@
 		status = "okay";
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		vol-down-key {
+			gpios = <&gpx2 1 1>;
+			linux,code = <114>;
+			label = "volume down";
+			debounce-interval = <10>;
+		};
+
+		vol-up-key {
+			gpios = <&gpx2 0 1>;
+			linux,code = <115>;
+			label = "volume up";
+			debounce-interval = <10>;
+		};
+
+		power-key {
+			gpios = <&gpx2 7 1>;
+			linux,code = <116>;
+			label = "power";
+			debounce-interval = <10>;
+			gpio-key,wakeup;
+		};
+
+		ok-key {
+			gpios = <&gpx3 5 1>;
+			linux,code = <352>;
+			label = "ok";
+			debounce-interval = <10>;
+		};
+	};
+
+	tsp_reg: voltage-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "TSP_FIXED_VOLTAGES";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpl0 3 0>;
+		enable-active-high;
+	};
+
+	i2c@13890000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-slave-addr = <0x10>;
+		samsung,i2c-max-bus-freq = <400000>;
+		pinctrl-0 = <&i2c3_bus>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		mms114-touchscreen@48 {
+			compatible = "melfas,mms114";
+			reg = <0x48>;
+			interrupt-parent = <&gpx0>;
+			interrupts = <4 2>;
+			x-size = <720>;
+			y-size = <1280>;
+			avdd-supply = <&tsp_reg>;
+			vdd-supply = <&tsp_reg>;
+		};
+	};
+
 	i2c@138B0000 {
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-slave-addr = <0x10>;
 		samsung,i2c-max-bus-freq = <100000>;
-		gpios = <&gpb 6 3 3 0>,
-			<&gpb 7 3 3 0>;
+		pinctrl-0 = <&i2c5_bus>;
+		pinctrl-names = "default";
 		status = "okay";
 
 		max8997_pmic@66 {
@@ -93,9 +146,9 @@
 			max8997,pmic-ignore-gpiodvs-side-effect;
 			max8997,pmic-buck125-default-dvs-idx = <0>;
 
-			max8997,pmic-buck125-dvs-gpios = <&gpx0 5 1 0 0>,
-						         <&gpx0 6 1 0 0>,
-							 <&gpl0 0 1 0 0>;
+			max8997,pmic-buck125-dvs-gpios = <&gpx0 5 0>,
+						         <&gpx0 6 0>,
+							 <&gpl0 0 0>;
 
 			max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
 							 <1250000>, <1200000>,
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index d877dbe..e31bfc4 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -31,6 +31,11 @@
 		pinctrl2 = &pinctrl_2;
 	};
 
+	pd_lcd1: lcd1-power-domain@10023CA0 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10023CA0 0x20>;
+	};
+
 	gic:interrupt-controller@10490000 {
 		cpu-offset = <0x8000>;
 	};
@@ -64,4 +69,11 @@
 		compatible = "samsung,pinctrl-exynos4210";
 		reg = <0x03860000 0x1000>;
 	};
+
+	tmu@100C0000 {
+		compatible = "samsung,exynos4210-tmu";
+		interrupt-parent = <&combiner>;
+		reg = <0x100C0000 0x100>;
+		interrupts = <2 4>;
+	};
 };
diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi
new file mode 100644
index 0000000..c6ae200
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4212.dtsi
@@ -0,0 +1,28 @@
+/*
+ * Samsung's Exynos4212 SoC device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos4212 SoC device nodes are listed in this file. Exynos4212
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos4212 SoC. As device tree coverage for Exynos4212 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/include/ "exynos4x12.dtsi"
+
+/ {
+	compatible = "samsung,exynos4212";
+
+	gic:interrupt-controller@10490000 {
+		cpu-offset = <0x8000>;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts
new file mode 100644
index 0000000..f05bf57
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts
@@ -0,0 +1,45 @@
+/*
+ * Samsung's Exynos4412 based SMDK board device tree source
+ *
+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Device tree source file for Samsung's SMDK4412 board which is based on
+ * Samsung's Exynos4412 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos4412.dtsi"
+
+/ {
+	model = "Samsung SMDK evaluation board based on Exynos4412";
+	compatible = "samsung,smdk4412", "samsung,exynos4412";
+
+	memory {
+		reg = <0x40000000 0x40000000>;
+	};
+
+	chosen {
+		bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
+	};
+
+	serial@13800000 {
+		status = "okay";
+	};
+
+	serial@13810000 {
+		status = "okay";
+	};
+
+	serial@13820000 {
+		status = "okay";
+	};
+
+	serial@13830000 {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
new file mode 100644
index 0000000..d7dfe31
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -0,0 +1,28 @@
+/*
+ * Samsung's Exynos4412 SoC device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos4412 SoC device nodes are listed in this file. Exynos4412
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos4412 SoC. As device tree coverage for Exynos4412 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/include/ "exynos4x12.dtsi"
+
+/ {
+	compatible = "samsung,exynos4412";
+
+	gic:interrupt-controller@10490000 {
+		cpu-offset = <0x4000>;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
new file mode 100644
index 0000000..8e6115a
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
@@ -0,0 +1,965 @@
+/*
+ * Samsung's Exynos4x12 SoCs pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos4x12 SoCs pin-mux and pin-config optiosn are listed as device
+ * tree nodes are listed in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/ {
+	pinctrl@11400000 {
+		gpa0: gpa0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpa1: gpa1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpb: gpb {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc0: gpc0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpc1: gpc1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpd0: gpd0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpd1: gpd1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf0: gpf0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf1: gpf1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf2: gpf2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpf3: gpf3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpj0: gpj0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpj1: gpj1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		uart0_data: uart0-data {
+			samsung,pins = "gpa0-0", "gpa0-1";
+			samsung,pin-function = <0x2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart0_fctl: uart0-fctl {
+			samsung,pins = "gpa0-2", "gpa0-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart1_data: uart1-data {
+			samsung,pins = "gpa0-4", "gpa0-5";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart1_fctl: uart1-fctl {
+			samsung,pins = "gpa0-6", "gpa0-7";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c2_bus: i2c2-bus {
+			samsung,pins = "gpa0-6", "gpa0-7";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart2_data: uart2-data {
+			samsung,pins = "gpa1-0", "gpa1-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart2_fctl: uart2-fctl {
+			samsung,pins = "gpa1-2", "gpa1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart_audio_a: uart-audio-a {
+			samsung,pins = "gpa1-0", "gpa1-1";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c3_bus: i2c3-bus {
+			samsung,pins = "gpa1-2", "gpa1-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart3_data: uart3-data {
+			samsung,pins = "gpa1-4", "gpa1-5";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		uart_audio_b: uart-audio-b {
+			samsung,pins = "gpa1-4", "gpa1-5";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		spi0_bus: spi0-bus {
+			samsung,pins = "gpb-0", "gpb-2", "gpb-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c4_bus: i2c4-bus {
+			samsung,pins = "gpb-0", "gpb-1";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		spi1_bus: spi1-bus {
+			samsung,pins = "gpb-4", "gpb-6", "gpb-7";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c5_bus: i2c5-bus {
+			samsung,pins = "gpb-2", "gpb-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2s1_bus: i2s1-bus {
+			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+					"gpc0-4";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pcm1_bus: pcm1-bus {
+			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+					"gpc0-4";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		ac97_bus: ac97-bus {
+			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+					"gpc0-4";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2s2_bus: i2s2-bus {
+			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+					"gpc1-4";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pcm2_bus: pcm2-bus {
+			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+					"gpc1-4";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		spdif_bus: spdif-bus {
+			samsung,pins = "gpc1-0", "gpc1-1";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c6_bus: i2c6-bus {
+			samsung,pins = "gpc1-3", "gpc1-4";
+			samsung,pin-function = <4>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		spi2_bus: spi2-bus {
+			samsung,pins = "gpc1-1", "gpc1-3", "gpc1-4";
+			samsung,pin-function = <5>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		pwm0_out: pwm0-out {
+			samsung,pins = "gpd0-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pwm1_out: pwm1-out {
+			samsung,pins = "gpd0-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		lcd_ctrl: lcd-ctrl {
+			samsung,pins = "gpd0-0", "gpd0-1";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c7_bus: i2c7-bus {
+			samsung,pins = "gpd0-2", "gpd0-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		pwm2_out: pwm2-out {
+			samsung,pins = "gpd0-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pwm3_out: pwm3-out {
+			samsung,pins = "gpd0-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c0_bus: i2c0-bus {
+			samsung,pins = "gpd1-0", "gpd1-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		mipi0_clk: mipi0-clk {
+			samsung,pins = "gpd1-0", "gpd1-1";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		i2c1_bus: i2c1-bus {
+			samsung,pins = "gpd1-2", "gpd1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		mipi1_clk: mipi1-clk {
+			samsung,pins = "gpd1-2", "gpd1-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		lcd_clk: lcd-clk {
+			samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		lcd_data16: lcd-data-width16 {
+			samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2",
+					"gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0",
+					"gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7",
+					"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		lcd_data18: lcd-data-width18 {
+			samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1",
+					"gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7",
+					"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
+					"gpf2-6", "gpf2-7", "gpf3-0", "gpf3-1",
+					"gpf3-2", "gpf3-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		lcd_data24: lcd-data-width24 {
+			samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
+					"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
+					"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
+					"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
+					"gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
+					"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		lcd_ldi: lcd-ldi {
+			samsung,pins = "gpf3-4";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_port_a: cam-port-a {
+			samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
+					"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
+					"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-3",
+					"gpj1-4";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+	};
+
+	pinctrl@11000000 {
+		gpk0: gpk0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpk1: gpk1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpk2: gpk2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpk3: gpk3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpl0: gpl0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpl1: gpl1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpl2: gpl2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpm0: gpm0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpm1: gpm1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpm2: gpm2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpm3: gpm3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpm4: gpm4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpy0: gpy0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy1: gpy1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy2: gpy2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy3: gpy3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy4: gpy4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy5: gpy5 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpy6: gpy6 {
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpx0: gpx0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
+				     <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>;
+			#interrupt-cells = <2>;
+		};
+
+		gpx1: gpx1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
+				     <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
+			#interrupt-cells = <2>;
+		};
+
+		gpx2: gpx2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpx3: gpx3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		sd0_clk: sd0-clk {
+			samsung,pins = "gpk0-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_cmd: sd0-cmd {
+			samsung,pins = "gpk0-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_cd: sd0-cd {
+			samsung,pins = "gpk0-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_bus1: sd0-bus-width1 {
+			samsung,pins = "gpk0-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_bus4: sd0-bus-width4 {
+			samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd0_bus8: sd0-bus-width8 {
+			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd4_clk: sd4-clk {
+			samsung,pins = "gpk0-0";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd4_cmd: sd4-cmd {
+			samsung,pins = "gpk0-1";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd4_cd: sd4-cd {
+			samsung,pins = "gpk0-2";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd4_bus1: sd4-bus-width1 {
+			samsung,pins = "gpk0-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd4_bus4: sd4-bus-width4 {
+			samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd4_bus8: sd4-bus-width8 {
+			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <4>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_clk: sd1-clk {
+			samsung,pins = "gpk1-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_cmd: sd1-cmd {
+			samsung,pins = "gpk1-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_cd: sd1-cd {
+			samsung,pins = "gpk1-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_bus1: sd1-bus-width1 {
+			samsung,pins = "gpk1-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd1_bus4: sd1-bus-width4 {
+			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_clk: sd2-clk {
+			samsung,pins = "gpk2-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_cmd: sd2-cmd {
+			samsung,pins = "gpk2-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_cd: sd2-cd {
+			samsung,pins = "gpk2-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_bus1: sd2-bus-width1 {
+			samsung,pins = "gpk2-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_bus4: sd2-bus-width4 {
+			samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd2_bus8: sd2-bus-width8 {
+			samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd3_clk: sd3-clk {
+			samsung,pins = "gpk3-0";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd3_cmd: sd3-cmd {
+			samsung,pins = "gpk3-1";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd3_cd: sd3-cd {
+			samsung,pins = "gpk3-2";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd3_bus1: sd3-bus-width1 {
+			samsung,pins = "gpk3-3";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		sd3_bus4: sd3-bus-width4 {
+			samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
+			samsung,pin-function = <2>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <3>;
+		};
+
+		keypad_col0: keypad-col0 {
+			samsung,pins = "gpl2-0";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		keypad_col1: keypad-col1 {
+			samsung,pins = "gpl2-1";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		keypad_col2: keypad-col2 {
+			samsung,pins = "gpl2-2";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		keypad_col3: keypad-col3 {
+			samsung,pins = "gpl2-3";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		keypad_col4: keypad-col4 {
+			samsung,pins = "gpl2-4";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		keypad_col5: keypad-col5 {
+			samsung,pins = "gpl2-5";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		keypad_col6: keypad-col6 {
+			samsung,pins = "gpl2-6";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		keypad_col7: keypad-col7 {
+			samsung,pins = "gpl2-7";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		cam_port_b: cam-port-b {
+			samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
+					"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
+					"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1",
+					"gpm2-2";
+			samsung,pin-function = <3>;
+			samsung,pin-pud = <3>;
+			samsung,pin-drv = <0>;
+		};
+
+		eint0: ext-int0 {
+			samsung,pins = "gpx0-0";
+			samsung,pin-function = <0xf>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		eint8: ext-int8 {
+			samsung,pins = "gpx1-0";
+			samsung,pin-function = <0xf>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		eint15: ext-int15 {
+			samsung,pins = "gpx1-7";
+			samsung,pin-function = <0xf>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		eint16: ext-int16 {
+			samsung,pins = "gpx2-0";
+			samsung,pin-function = <0xf>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		eint31: ext-int31 {
+			samsung,pins = "gpx3-7";
+			samsung,pin-function = <0xf>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+	};
+
+	pinctrl@03860000 {
+		gpz: gpz {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		i2s0_bus: i2s0-bus {
+			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+					"gpz-4", "gpz-5", "gpz-6";
+			samsung,pin-function = <0x2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+
+		pcm0_bus: pcm0-bus {
+			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+					"gpz-4";
+			samsung,pin-function = <0x3>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+	};
+
+	pinctrl@106E0000 {
+		gpv0: gpv0 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpv1: gpv1 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpv2: gpv2 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpv3: gpv3 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpv4: gpv4 {
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		c2c_bus: c2c-bus {
+			samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3",
+					"gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
+					"gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
+					"gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7",
+					"gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3",
+					"gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7",
+					"gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3",
+					"gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7",
+					"gpv4-0", "gpv4-1";
+			samsung,pin-function = <0x2>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
new file mode 100644
index 0000000..179a62e
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -0,0 +1,69 @@
+/*
+ * Samsung's Exynos4x12 SoCs device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos4x12 SoCs device nodes are listed in this file. Exynos4x12
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos4x12 SoC. As device tree coverage for Exynos4x12 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/include/ "exynos4.dtsi"
+/include/ "exynos4x12-pinctrl.dtsi"
+
+/ {
+	aliases {
+		pinctrl0 = &pinctrl_0;
+		pinctrl1 = &pinctrl_1;
+		pinctrl2 = &pinctrl_2;
+		pinctrl3 = &pinctrl_3;
+	};
+
+	combiner:interrupt-controller@10440000 {
+		interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
+			     <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
+			     <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
+			     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
+			     <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>;
+	};
+
+	pinctrl_0: pinctrl@11400000 {
+		compatible = "samsung,pinctrl-exynos4x12";
+		reg = <0x11400000 0x1000>;
+		interrupts = <0 47 0>;
+	};
+
+	pinctrl_1: pinctrl@11000000 {
+		compatible = "samsung,pinctrl-exynos4x12";
+		reg = <0x11000000 0x1000>;
+		interrupts = <0 46 0>;
+
+		wakup_eint: wakeup-interrupt-controller {
+			compatible = "samsung,exynos4210-wakeup-eint";
+			interrupt-parent = <&gic>;
+			interrupts = <0 32 0>;
+		};
+	};
+
+	pinctrl_2: pinctrl@03860000 {
+		compatible = "samsung,pinctrl-exynos4x12";
+		reg = <0x03860000 0x1000>;
+		interrupt-parent = <&combiner>;
+		interrupts = <10 0>;
+	};
+
+	pinctrl_3: pinctrl@106E0000 {
+		compatible = "samsung,pinctrl-exynos4x12";
+		reg = <0x106E0000 0x1000>;
+		interrupts = <0 72 0>;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index a352df4..942d576 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -17,10 +17,6 @@
 	compatible = "samsung,smdk5250", "samsung,exynos5250";
 
 	aliases {
-		mshc0 = &dwmmc_0;
-		mshc1 = &dwmmc_1;
-		mshc2 = &dwmmc_2;
-		mshc3 = &dwmmc_3;
 	};
 
 	memory {
@@ -55,8 +51,31 @@
 		};
 	};
 
+	i2c@121D0000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <40000>;
+		samsung,i2c-slave-addr = <0x38>;
+
+		sata-phy {
+			compatible = "samsung,sata-phy";
+			reg = <0x38>;
+		};
+	};
+
+	sata@122F0000 {
+		samsung,sata-freq = <66>;
+	};
+
 	i2c@12C80000 {
-		status = "disabled";
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <66000>;
+		gpios = <&gpa0 6 3 3 0>,
+			<&gpa0 7 3 3 0>;
+
+		hdmiddc@50 {
+			compatible = "samsung,exynos5-hdmiddc";
+			reg = <0x50>;
+		};
 	};
 
 	i2c@12C90000 {
@@ -79,7 +98,17 @@
 		status = "disabled";
 	};
 
-	dwmmc_0: dwmmc0@12200000 {
+	i2c@12CE0000 {
+		samsung,i2c-sda-delay = <100>;
+		samsung,i2c-max-bus-freq = <66000>;
+
+		hdmiphy@38 {
+			compatible = "samsung,exynos5-hdmiphy";
+			reg = <0x38>;
+		};
+	};
+
+	dwmmc0@12200000 {
 		num-slots = <1>;
 		supports-highspeed;
 		broken-cd;
@@ -100,11 +129,11 @@
 		};
 	};
 
-	dwmmc_1: dwmmc1@12210000 {
+	dwmmc1@12210000 {
 		status = "disabled";
 	};
 
-	dwmmc_2: dwmmc2@12220000 {
+	dwmmc2@12220000 {
 		num-slots = <1>;
 		supports-highspeed;
 		fifo-depth = <0x80>;
@@ -125,7 +154,7 @@
 		};
 	};
 
-	dwmmc_3: dwmmc3@12230000 {
+	dwmmc3@12230000 {
 		status = "disabled";
 	};
 
@@ -166,4 +195,13 @@
 	spi_2: spi@12d40000 {
 		status = "disabled";
 	};
+
+	hdmi {
+		hpd-gpio = <&gpx3 7 0xf 1 3>;
+	};
+
+	codec@11000000 {
+		samsung,mfc-r = <0x43000000 0x800000>;
+		samsung,mfc-l = <0x51000000 0x800000>;
+	};
 };
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
new file mode 100644
index 0000000..17dd951
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -0,0 +1,43 @@
+/*
+ * Google Snow board device tree source
+ *
+ * Copyright (c) 2012 Google, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos5250.dtsi"
+/include/ "cros5250-common.dtsi"
+
+/ {
+	model = "Google Snow";
+	compatible = "google,snow", "samsung,exynos5250";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		lid-switch {
+			label = "Lid";
+			gpios = <&gpx3 5 0 0x10000 0>;
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <0>; /* SW_LID */
+			debounce-interval = <1>;
+			gpio-key,wakeup;
+		};
+	};
+
+	/*
+	 * On Snow we've got SIP WiFi and so can keep drive strengths low to
+	 * reduce EMI.
+	 */
+	dwmmc3@12230000 {
+		slot@0 {
+			gpios = <&gpc4 0 2 0 0>, <&gpc4 1 2 3 0>,
+				<&gpc4 3 2 3 0>, <&gpc4 4 2 3 0>,
+				<&gpc4 5 2 3 0>, <&gpc4 6 2 3 0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index dddfd6e..36d8246 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -31,6 +31,10 @@
 		gsc1 = &gsc_1;
 		gsc2 = &gsc_2;
 		gsc3 = &gsc_3;
+		mshc0 = &dwmmc_0;
+		mshc1 = &dwmmc_1;
+		mshc2 = &dwmmc_2;
+		mshc3 = &dwmmc_3;
 	};
 
 	gic:interrupt-controller@10481000 {
@@ -62,12 +66,24 @@
 		interrupts = <0 42 0>;
 	};
 
+	codec@11000000 {
+		compatible = "samsung,mfc-v6";
+		reg = <0x11000000 0x10000>;
+		interrupts = <0 96 0>;
+	};
+
 	rtc {
 		compatible = "samsung,s3c6410-rtc";
 		reg = <0x101E0000 0x100>;
 		interrupts = <0 43 0>, <0 44 0>;
 	};
 
+	tmu@10060000 {
+		compatible = "samsung,exynos5250-tmu";
+		reg = <0x10060000 0x100>;
+		interrupts = <0 65 0>;
+	};
+
 	serial@12C00000 {
 		compatible = "samsung,exynos4210-uart";
 		reg = <0x12C00000 0x100>;
@@ -92,6 +108,17 @@
 		interrupts = <0 54 0>;
 	};
 
+	sata@122F0000 {
+		compatible = "samsung,exynos5-sata-ahci";
+		reg = <0x122F0000 0x1ff>;
+		interrupts = <0 115 0>;
+	};
+
+	sata-phy@12170000 {
+		compatible = "samsung,exynos5-sata-phy";
+		reg = <0x12170000 0x1ff>;
+	};
+
 	i2c@12C60000 {
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x12C60000 0x100>;
@@ -156,6 +183,21 @@
 		#size-cells = <0>;
 	};
 
+	i2c@12CE0000 {
+		compatible = "samsung,s3c2440-hdmiphy-i2c";
+		reg = <0x12CE0000 0x1000>;
+		interrupts = <0 64 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	i2c@121D0000 {
+                compatible = "samsung,exynos5-sata-phy-i2c";
+                reg = <0x121D0000 0x100>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+	};
+
 	spi_0: spi@12d20000 {
 		compatible = "samsung,exynos4210-spi";
 		reg = <0x12d20000 0x100>;
@@ -186,7 +228,7 @@
 		#size-cells = <0>;
 	};
 
-	dwmmc0@12200000 {
+	dwmmc_0: dwmmc0@12200000 {
 		compatible = "samsung,exynos5250-dw-mshc";
 		reg = <0x12200000 0x1000>;
 		interrupts = <0 75 0>;
@@ -194,7 +236,7 @@
 		#size-cells = <0>;
 	};
 
-	dwmmc1@12210000 {
+	dwmmc_1: dwmmc1@12210000 {
 		compatible = "samsung,exynos5250-dw-mshc";
 		reg = <0x12210000 0x1000>;
 		interrupts = <0 76 0>;
@@ -202,7 +244,7 @@
 		#size-cells = <0>;
 	};
 
-	dwmmc2@12220000 {
+	dwmmc_2: dwmmc2@12220000 {
 		compatible = "samsung,exynos5250-dw-mshc";
 		reg = <0x12220000 0x1000>;
 		interrupts = <0 77 0>;
@@ -210,7 +252,7 @@
 		#size-cells = <0>;
 	};
 
-	dwmmc3@12230000 {
+	dwmmc_3: dwmmc3@12230000 {
 		compatible = "samsung,exynos5250-dw-mshc";
 		reg = <0x12230000 0x1000>;
 		interrupts = <0 78 0>;
@@ -520,4 +562,16 @@
 		reg = <0x13e30000 0x1000>;
 		interrupts = <0 88 0>;
 	};
+
+	hdmi {
+		compatible = "samsung,exynos5-hdmi";
+		reg = <0x14530000 0x100000>;
+		interrupts = <0 95 0>;
+	};
+
+	mixer {
+		compatible = "samsung,exynos5-mixer";
+		reg = <0x14450000 0x10000>;
+		interrupts = <0 94 0>;
+	};
 };
diff --git a/arch/arm/boot/dts/href.dtsi b/arch/arm/boot/dts/href.dtsi
new file mode 100644
index 0000000..592fb9d
--- /dev/null
+++ b/arch/arm/boot/dts/href.dtsi
@@ -0,0 +1,273 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "dbx5x0.dtsi"
+
+/ {
+	memory {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@1 {
+			linux,code = <11>;
+			label = "SFH7741 Proximity Sensor";
+		};
+	};
+
+	soc-u9500 {
+		uart@80120000 {
+			status = "okay";
+		};
+
+		uart@80121000 {
+			status = "okay";
+		};
+
+		uart@80007000 {
+			status = "okay";
+		};
+
+		i2c@80004000 {
+			tc3589x@42 {
+				compatible = "tc3589x";
+				reg = <0x42>;
+				interrupt-parent = <&gpio6>;
+				interrupts = <25 0x1>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				tc3589x_gpio: tc3589x_gpio {
+					compatible = "tc3589x-gpio";
+					interrupts = <0 0x1>;
+
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					gpio-controller;
+					#gpio-cells = <2>;
+				};
+			};
+		};
+
+		i2c@80128000 {
+			lp5521@0x33 {
+				compatible = "lp5521";
+				reg = <0x33>;
+			};
+
+			lp5521@0x34 {
+				compatible = "lp5521";
+				reg = <0x34>;
+			};
+
+			bh1780@0x29 {
+				compatible = "rohm,bh1780gli";
+				reg = <0x33>;
+			};
+		};
+
+		// External Micro SD slot
+		sdi0_per1@80126000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <4>;
+			mmc-cap-sd-highspeed;
+			mmc-cap-mmc-highspeed;
+			vmmc-supply = <&ab8500_ldo_aux3_reg>;
+
+			cd-gpios  = <&tc3589x_gpio 3 0x4>;
+
+			status = "okay";
+		};
+
+		// WLAN SDIO channel
+		sdi1_per2@80118000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <4>;
+
+			status = "okay";
+		};
+
+		// PoP:ed eMMC
+		sdi2_per3@80005000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <8>;
+			mmc-cap-mmc-highspeed;
+
+			status = "okay";
+		};
+
+		// On-board eMMC
+		sdi4_per2@80114000 {
+			arm,primecell-periphid = <0x10480180>;
+		        max-frequency = <50000000>;
+			bus-width = <8>;
+			mmc-cap-mmc-highspeed;
+			vmmc-supply = <&ab8500_ldo_aux2_reg>;
+
+			status = "okay";
+		};
+
+		sound {
+			compatible = "stericsson,snd-soc-mop500";
+
+			stericsson,cpu-dai = <&msp1 &msp3>;
+			stericsson,audio-codec = <&codec>;
+		};
+
+		msp1: msp@80124000 {
+			status = "okay";
+		};
+
+		msp3: msp@80125000 {
+			status = "okay";
+		};
+
+		prcmu@80157000 {
+			db8500-prcmu-regulators {
+				db8500_vape_reg: db8500_vape {
+					regulator-name = "db8500-vape";
+				};
+
+				db8500_varm_reg: db8500_varm {
+					regulator-name = "db8500-varm";
+				};
+
+				db8500_vmodem_reg: db8500_vmodem {
+					regulator-name = "db8500-vmodem";
+				};
+
+				db8500_vpll_reg: db8500_vpll {
+					regulator-name = "db8500-vpll";
+				};
+
+				db8500_vsmps1_reg: db8500_vsmps1 {
+					regulator-name = "db8500-vsmps1";
+				};
+
+				db8500_vsmps2_reg: db8500_vsmps2 {
+					regulator-name = "db8500-vsmps2";
+				};
+
+				db8500_vsmps3_reg: db8500_vsmps3 {
+					regulator-name = "db8500-vsmps3";
+				};
+
+				db8500_vrf1_reg: db8500_vrf1 {
+					regulator-name = "db8500-vrf1";
+				};
+
+				db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
+					regulator-name = "db8500-sva-mmdsp";
+				};
+
+				db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
+					regulator-name = "db8500-sva-mmdsp-ret";
+				};
+
+				db8500_sva_pipe_reg: db8500_sva_pipe {
+					regulator-name = "db8500_sva_pipe";
+				};
+
+				db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
+					regulator-name = "db8500_sia_mmdsp";
+				};
+
+				db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
+					regulator-name = "db8500-sia-mmdsp-ret";
+				};
+
+				db8500_sia_pipe_reg: db8500_sia_pipe {
+					regulator-name = "db8500-sia-pipe";
+				};
+
+				db8500_sga_reg: db8500_sga {
+					regulator-name = "db8500-sga";
+				};
+
+				db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
+					regulator-name = "db8500-b2r2-mcde";
+				};
+
+				db8500_esram12_reg: db8500_esram12 {
+					regulator-name = "db8500-esram12";
+				};
+
+				db8500_esram12_ret_reg: db8500_esram12_ret {
+					regulator-name = "db8500-esram12-ret";
+				};
+
+				db8500_esram34_reg: db8500_esram34 {
+					regulator-name = "db8500-esram34";
+				};
+
+				db8500_esram34_ret_reg: db8500_esram34_ret {
+					regulator-name = "db8500-esram34-ret";
+				};
+			};
+
+			ab8500@5 {
+				ab8500-regulators {
+					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+						regulator-name = "V-DISPLAY";
+					};
+
+					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+						regulator-name = "V-eMMC1";
+					};
+
+					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+						regulator-name = "V-MMC-SD";
+					};
+
+					ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
+						regulator-name = "V-INTCORE";
+					};
+
+					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
+						regulator-name = "V-TVOUT";
+					};
+
+					ab8500_ldo_usb_reg: ab8500_ldo_usb {
+						regulator-name = "dummy";
+					};
+
+					ab8500_ldo_audio_reg: ab8500_ldo_audio {
+						regulator-name = "V-AUD";
+					};
+
+					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+						regulator-name = "V-AMIC1";
+					};
+
+					ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
+						regulator-name = "V-AMIC2";
+					};
+
+					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
+						regulator-name = "V-DMIC";
+					};
+
+					ab8500_ldo_ana_reg: ab8500_ldo_ana {
+						regulator-name = "V-CSI/DSI";
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/hrefprev60.dts b/arch/arm/boot/dts/hrefprev60.dts
new file mode 100644
index 0000000..eec29c4
--- /dev/null
+++ b/arch/arm/boot/dts/hrefprev60.dts
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "dbx5x0.dtsi"
+/include/ "href.dtsi"
+/include/ "stuib.dtsi"
+
+/ {
+	model = "ST-Ericsson HREF (pre-v60) platform with Device Tree";
+	compatible = "st-ericsson,mop500", "st-ericsson,u8500";
+
+	gpio_keys {
+		button@1 {
+			gpios = <&tc3589x_gpio 7 0x4>;
+		};
+	};
+
+	soc-u9500 {
+		i2c@80004000 {
+			tps61052@33 {
+				compatible = "tps61052";
+				reg = <0x33>;
+			};
+		};
+
+		i2c@80110000 {
+			bu21013_tp@0x5c {
+				reset-gpio = <&tc3589x_gpio 13 0x4>;
+			};
+		};
+
+		vmmci: regulator-gpio {
+			gpios = <&tc3589x_gpio 18 0x4>;
+			gpio-enable = <&tc3589x_gpio 17 0x4>;
+
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/hrefv60plus.dts
index 2131d77..55f4191 100644
--- a/arch/arm/boot/dts/hrefv60plus.dts
+++ b/arch/arm/boot/dts/hrefv60plus.dts
@@ -11,85 +11,200 @@
 
 /dts-v1/;
 /include/ "dbx5x0.dtsi"
+/include/ "href.dtsi"
+/include/ "stuib.dtsi"
 
 / {
-	model = "ST-Ericsson HREF platform with Device Tree";
-	compatible = "st-ericsson,hrefv60+";
+	model = "ST-Ericsson HREF (v60+) platform with Device Tree";
+	compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
 
-	memory {
-		reg = <0x00000000 0x20000000>;
+	gpio_keys {
+		button@1 {
+			gpios = <&gpio6 25 0x4>;
+		};
 	};
 
 	soc-u9500 {
-		uart@80120000 {
+		i2c@80110000 {
+			bu21013_tp@0x5c {
+				reset-gpio = <&gpio4 15 0x4>;
+			};
+		};
+
+		// External Micro SD slot
+		sdi0_per1@80126000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <4>;
+			mmc-cap-sd-highspeed;
+			mmc-cap-mmc-highspeed;
+			vmmc-supply = <&ab8500_ldo_aux3_reg>;
+
+			cd-gpios  = <&tc3589x_gpio 3 0x4>;
+
 			status = "okay";
 		};
 
-		uart@80121000 {
+		// WLAN SDIO channel
+		sdi1_per2@80118000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <4>;
+
 			status = "okay";
 		};
 
-		uart@80007000 {
+		// PoP:ed eMMC
+		sdi2_per3@80005000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <8>;
+			mmc-cap-mmc-highspeed;
+
 			status = "okay";
 		};
 
-		i2c@80004000 {
-			tc3589x@42 {
-				compatible = "tc3589x";
-				reg = <0x42>;
-				interrupt-parent = <&gpio6>;
-				interrupts = <25 0x1>;
+		// On-board eMMC
+		sdi4_per2@80114000 {
+			arm,primecell-periphid = <0x10480180>;
+		        max-frequency = <50000000>;
+			bus-width = <8>;
+			mmc-cap-mmc-highspeed;
+			vmmc-supply = <&ab8500_ldo_aux2_reg>;
 
-				interrupt-controller;
-				#interrupt-cells = <2>;
+			status = "okay";
+		};
 
-				tc3589x_gpio: tc3589x_gpio {
-					compatible = "tc3589x-gpio";
-					interrupts = <0 0x1>;
+		prcmu@80157000 {
+			db8500-prcmu-regulators {
+				db8500_vape_reg: db8500_vape {
+					regulator-name = "db8500-vape";
+				};
 
-					interrupt-controller;
-					#interrupt-cells = <2>;
-					gpio-controller;
-					#gpio-cells = <2>;
+				db8500_varm_reg: db8500_varm {
+					regulator-name = "db8500-varm";
 				};
-			};
 
-			tps61052@33 {
-				compatible = "tps61052";
-				reg = <0x33>;
-			};
-		};
+				db8500_vmodem_reg: db8500_vmodem {
+					regulator-name = "db8500-vmodem";
+				};
 
-		i2c@80128000 {
-			lp5521@0x33 {
-				compatible = "lp5521";
-				reg = <0x33>;
-			};
+				db8500_vpll_reg: db8500_vpll {
+					regulator-name = "db8500-vpll";
+				};
 
-			lp5521@0x34 {
-				compatible = "lp5521";
-				reg = <0x34>;
-			};
+				db8500_vsmps1_reg: db8500_vsmps1 {
+					regulator-name = "db8500-vsmps1";
+				};
+
+				db8500_vsmps2_reg: db8500_vsmps2 {
+					regulator-name = "db8500-vsmps2";
+				};
+
+				db8500_vsmps3_reg: db8500_vsmps3 {
+					regulator-name = "db8500-vsmps3";
+				};
+
+				db8500_vrf1_reg: db8500_vrf1 {
+					regulator-name = "db8500-vrf1";
+				};
+
+				db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
+					regulator-name = "db8500-sva-mmdsp";
+				};
+
+				db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
+					regulator-name = "db8500-sva-mmdsp-ret";
+				};
+
+				db8500_sva_pipe_reg: db8500_sva_pipe {
+					regulator-name = "db8500_sva_pipe";
+				};
 
-			bh1780@0x29 {
-				compatible = "rohm,bh1780gli";
-				reg = <0x33>;
+				db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
+					regulator-name = "db8500_sia_mmdsp";
+				};
+
+				db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
+					regulator-name = "db8500-sia-mmdsp-ret";
+				};
+
+				db8500_sia_pipe_reg: db8500_sia_pipe {
+					regulator-name = "db8500-sia-pipe";
+				};
+
+				db8500_sga_reg: db8500_sga {
+					regulator-name = "db8500-sga";
+				};
+
+				db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
+					regulator-name = "db8500-b2r2-mcde";
+				};
+
+				db8500_esram12_reg: db8500_esram12 {
+					regulator-name = "db8500-esram12";
+				};
+
+				db8500_esram12_ret_reg: db8500_esram12_ret {
+					regulator-name = "db8500-esram12-ret";
+				};
+
+				db8500_esram34_reg: db8500_esram34 {
+					regulator-name = "db8500-esram34";
+				};
+
+				db8500_esram34_ret_reg: db8500_esram34_ret {
+					regulator-name = "db8500-esram34-ret";
+				};
 			};
-		};
 
-		sound {
-			compatible = "stericsson,snd-soc-mop500";
+			ab8500@5 {
+				ab8500-regulators {
+					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+						regulator-name = "V-DISPLAY";
+					};
 
-			stericsson,cpu-dai = <&msp1 &msp3>;
-			stericsson,audio-codec = <&codec>;
-		};
+					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+						regulator-name = "V-eMMC1";
+					};
 
-		msp1: msp@80124000 {
-			status = "okay";
-		};
+					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+						regulator-name = "V-MMC-SD";
+					};
 
-		msp3: msp@80125000 {
-			status = "okay";
+					ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
+						regulator-name = "V-INTCORE";
+					};
+
+					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
+						regulator-name = "V-TVOUT";
+					};
+
+					ab8500_ldo_usb_reg: ab8500_ldo_usb {
+						regulator-name = "dummy";
+					};
+
+					ab8500_ldo_audio_reg: ab8500_ldo_audio {
+						regulator-name = "V-AUD";
+					};
+
+					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+						regulator-name = "V-AMIC1";
+					};
+
+					ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
+						regulator-name = "V-AMIC2";
+					};
+
+					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
+						regulator-name = "V-DMIC";
+					};
+
+					ab8500_ldo_ana_reg: ab8500_ldo_ana {
+						regulator-name = "V-CSI/DSI";
+					};
+				};
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts
index 384d8b6..7c43b8e 100644
--- a/arch/arm/boot/dts/imx23-olinuxino.dts
+++ b/arch/arm/boot/dts/imx23-olinuxino.dts
@@ -40,6 +40,15 @@
 					reg = <0>;
 					fsl,pinmux-ids = <
 						0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				led_pin_gpio0_17: led_gpio0_17@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
 						0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */
 					>;
 					fsl,drive-strength = <0>;
@@ -47,6 +56,15 @@
 					fsl,pull-up = <0>;
 				};
 			};
+
+			ssp1: ssp@80034000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx23-spi";
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi2_pins_a>;
+				status = "okay";
+			};
 		};
 
 		apbx@80040000 {
@@ -91,11 +109,12 @@
 
 	leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_gpio0_17>;
 
 		user {
 			label = "green";
-			gpios = <&gpio2 1 0>;
-			linux,default-trigger = "default-on";
+			gpios = <&gpio2 1 1>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index 6d31aa3..65415c5 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -279,6 +279,19 @@
 					fsl,voltage = <1>;
 					fsl,pull-up = <0>;
 				};
+
+				spi2_pins_a: spi2@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x0182 /* MX23_PAD_GPMI_WRN__SSP2_SCK */
+						0x0142 /* MX23_PAD_GPMI_RDY1__SSP2_CMD */
+						0x0002 /* MX23_PAD_GPMI_D00__SSP2_DATA0 */
+						0x0032 /* MX23_PAD_GPMI_D03__SSP2_DATA3 */
+					>;
+					fsl,drive-strength = <1>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
 			};
 
 			digctl@8001c000 {
diff --git a/arch/arm/boot/dts/imx25-karo-tx25.dts b/arch/arm/boot/dts/imx25-karo-tx25.dts
new file mode 100644
index 0000000..d81f8a0
--- /dev/null
+++ b/arch/arm/boot/dts/imx25-karo-tx25.dts
@@ -0,0 +1,44 @@
+/*
+ * Copyright 2012 Sascha Hauer, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx25.dtsi"
+
+/ {
+	model = "Ka-Ro TX25";
+	compatible = "karo,imx25-tx25", "fsl,imx25";
+
+	memory {
+		reg = <0x80000000 0x02000000 0x90000000 0x02000000>;
+	};
+
+	soc {
+		aips@43f00000 {
+			uart1: serial@43f90000 {
+				status = "okay";
+			};
+		};
+
+		spba@50000000 {
+			fec: ethernet@50038000 {
+				status = "okay";
+				phy-mode = "rmii";
+			};
+		};
+
+		emi@80000000 {
+			nand@bb000000 {
+				nand-on-flash-bbt;
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
new file mode 100644
index 0000000..e1b13eb
--- /dev/null
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -0,0 +1,515 @@
+/*
+ * Copyright 2012 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	aliases {
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		usb0 = &usbotg;
+		usb1 = &usbhost1;
+	};
+
+	asic: asic-interrupt-controller@68000000 {
+		compatible = "fsl,imx25-asic", "fsl,avic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x68000000 0x8000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		osc {
+			compatible = "fsl,imx-osc", "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&asic>;
+		ranges;
+
+		aips@43f00000 { /* AIPS1 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x43f00000 0x100000>;
+			ranges;
+
+			i2c1: i2c@43f80000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
+				reg = <0x43f80000 0x4000>;
+				clocks = <&clks 48>;
+				clock-names = "";
+				interrupts = <3>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@43f84000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
+				reg = <0x43f84000 0x4000>;
+				clocks = <&clks 48>;
+				clock-names = "";
+				interrupts = <10>;
+				status = "disabled";
+			};
+
+			can1: can@43f88000 {
+				compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
+				reg = <0x43f88000 0x4000>;
+				interrupts = <43>;
+				clocks = <&clks 75>, <&clks 75>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			can2: can@43f8c000 {
+				compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
+				reg = <0x43f8c000 0x4000>;
+				interrupts = <44>;
+				clocks = <&clks 76>, <&clks 76>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart1: serial@43f90000 {
+				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+				reg = <0x43f90000 0x4000>;
+				interrupts = <45>;
+				clocks = <&clks 120>, <&clks 57>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart2: serial@43f94000 {
+				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+				reg = <0x43f94000 0x4000>;
+				interrupts = <32>;
+				clocks = <&clks 121>, <&clks 57>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			i2c2: i2c@43f98000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx25-i2c", "fsl,imx21-i2c";
+				reg = <0x43f98000 0x4000>;
+				clocks = <&clks 48>;
+				clock-names = "";
+				interrupts = <4>;
+				status = "disabled";
+			};
+
+			owire@43f9c000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x43f9c000 0x4000>;
+				clocks = <&clks 51>;
+				clock-names = "";
+				interrupts = <2>;
+				status = "disabled";
+			};
+
+			spi1: cspi@43fa4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
+				reg = <0x43fa4000 0x4000>;
+				clocks = <&clks 62>;
+				clock-names = "ipg";
+				interrupts = <14>;
+				status = "disabled";
+			};
+
+			kpp@43fa8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x43fa8000 0x4000>;
+				clocks = <&clks 102>;
+				clock-names = "";
+				interrupts = <24>;
+				status = "disabled";
+			};
+
+			iomuxc@43fac000{
+				compatible = "fsl,imx25-iomuxc";
+				reg = <0x43fac000 0x4000>;
+			};
+
+			audmux@43fb0000 {
+				compatible = "fsl,imx25-audmux", "fsl,imx31-audmux";
+				reg = <0x43fb0000 0x4000>;
+				status = "disabled";
+			};
+		};
+
+		spba@50000000 {
+			compatible = "fsl,spba-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x50000000 0x40000>;
+			ranges;
+
+			spi3: cspi@50004000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
+				reg = <0x50004000 0x4000>;
+				interrupts = <0>;
+				clocks = <&clks 80>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			uart4: serial@50008000 {
+				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+				reg = <0x50008000 0x4000>;
+				interrupts = <5>;
+				clocks = <&clks 123>, <&clks 57>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart3: serial@5000c000 {
+				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+				reg = <0x5000c000 0x4000>;
+				interrupts = <18>;
+				clocks = <&clks 122>, <&clks 57>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			spi2: cspi@50010000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
+				reg = <0x50010000 0x4000>;
+				clocks = <&clks 79>;
+				clock-names = "ipg";
+				interrupts = <13>;
+				status = "disabled";
+			};
+
+			ssi2: ssi@50014000 {
+				compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
+				reg = <0x50014000 0x4000>;
+				interrupts = <11>;
+				status = "disabled";
+			};
+
+			esai@50018000 {
+				reg = <0x50018000 0x4000>;
+				interrupts = <7>;
+			};
+
+			uart5: serial@5002c000 {
+				compatible = "fsl,imx25-uart", "fsl,imx21-uart";
+				reg = <0x5002c000 0x4000>;
+				interrupts = <40>;
+				clocks = <&clks 124>, <&clks 57>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			tsc: tsc@50030000 {
+				compatible = "fsl,imx25-adc", "fsl,imx21-tsc";
+				reg = <0x50030000 0x4000>;
+				interrupts = <46>;
+				clocks = <&clks 119>;
+				clock-names = "ipg";
+				status = "disabled";
+			};
+
+			ssi1: ssi@50034000 {
+				compatible = "fsl,imx25-ssi", "fsl,imx21-ssi";
+				reg = <0x50034000 0x4000>;
+				interrupts = <12>;
+				status = "disabled";
+			};
+
+			fec: ethernet@50038000 {
+				compatible = "fsl,imx25-fec";
+				reg = <0x50038000 0x4000>;
+				interrupts = <57>;
+				clocks = <&clks 88>, <&clks 65>;
+				clock-names = "ipg", "ahb";
+				status = "disabled";
+			};
+		};
+
+		aips@53f00000 { /* AIPS2 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x53f00000 0x100000>;
+			ranges;
+
+			clks: ccm@53f80000 {
+				compatible = "fsl,imx25-ccm";
+				reg = <0x53f80000 0x4000>;
+				interrupts = <31>;
+				#clock-cells = <1>;
+			};
+
+			gpt4: timer@53f84000 {
+				compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
+				reg = <0x53f84000 0x4000>;
+				clocks = <&clks 9>, <&clks 45>;
+				clock-names = "ipg", "per";
+				interrupts = <1>;
+			};
+
+			gpt3: timer@53f88000 {
+				compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
+				reg = <0x53f88000 0x4000>;
+				clocks = <&clks 9>, <&clks 47>;
+				clock-names = "ipg", "per";
+				interrupts = <29>;
+			};
+
+			gpt2: timer@53f8c000 {
+				compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
+				reg = <0x53f8c000 0x4000>;
+				clocks = <&clks 9>, <&clks 47>;
+				clock-names = "ipg", "per";
+				interrupts = <53>;
+			};
+
+			gpt1: timer@53f90000 {
+				compatible = "fsl,imx25-gpt", "fsl,imx31-gpt";
+				reg = <0x53f90000 0x4000>;
+				clocks = <&clks 9>, <&clks 47>;
+				clock-names = "ipg", "per";
+				interrupts = <54>;
+			};
+
+			epit1: timer@53f94000 {
+				compatible = "fsl,imx25-epit";
+				reg = <0x53f94000 0x4000>;
+				interrupts = <28>;
+			};
+
+			epit2: timer@53f98000 {
+				compatible = "fsl,imx25-epit";
+				reg = <0x53f98000 0x4000>;
+				interrupts = <27>;
+			};
+
+			gpio4: gpio@53f9c000 {
+				compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
+				reg = <0x53f9c000 0x4000>;
+				interrupts = <23>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			pwm2: pwm@53fa0000 {
+				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
+				#pwm-cells = <2>;
+				reg = <0x53fa0000 0x4000>;
+				clocks = <&clks 106>, <&clks 36>;
+				clock-names = "ipg", "per";
+				interrupts = <36>;
+			};
+
+			gpio3: gpio@53fa4000 {
+				compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
+				reg = <0x53fa4000 0x4000>;
+				interrupts = <16>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			pwm3: pwm@53fa8000 {
+				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
+				#pwm-cells = <2>;
+				reg = <0x53fa8000 0x4000>;
+				clocks = <&clks 107>, <&clks 36>;
+				clock-names = "ipg", "per";
+				interrupts = <41>;
+			};
+
+			esdhc1: esdhc@53fb4000 {
+				compatible = "fsl,imx25-esdhc";
+				reg = <0x53fb4000 0x4000>;
+				interrupts = <9>;
+				clocks = <&clks 86>, <&clks 63>, <&clks 45>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
+			esdhc2: esdhc@53fb8000 {
+				compatible = "fsl,imx25-esdhc";
+				reg = <0x53fb8000 0x4000>;
+				interrupts = <8>;
+				clocks = <&clks 87>, <&clks 64>, <&clks 46>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
+			lcdc@53fbc000 {
+				reg = <0x53fbc000 0x4000>;
+				interrupts = <39>;
+				clocks = <&clks 103>, <&clks 66>, <&clks 49>;
+				clock-names = "ipg", "ahb", "per";
+				status = "disabled";
+			};
+
+			slcdc@53fc0000 {
+				reg = <0x53fc0000 0x4000>;
+				interrupts = <38>;
+				status = "disabled";
+			};
+
+			pwm4: pwm@53fc8000 {
+				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
+				reg = <0x53fc8000 0x4000>;
+				clocks = <&clks 108>, <&clks 36>;
+				clock-names = "ipg", "per";
+				interrupts = <42>;
+			};
+
+			gpio1: gpio@53fcc000 {
+				compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
+				reg = <0x53fcc000 0x4000>;
+				interrupts = <52>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@53fd0000 {
+				compatible = "fsl,imx25-gpio", "fsl,imx35-gpio";
+				reg = <0x53fd0000 0x4000>;
+				interrupts = <51>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			sdma@53fd4000 {
+				compatible = "fsl,imx25-sdma", "fsl,imx35-sdma";
+				reg = <0x53fd4000 0x4000>;
+				clocks = <&clks 112>, <&clks 68>;
+				clock-names = "ipg", "ahb";
+				interrupts = <34>;
+			};
+
+			wdog@53fdc000 {
+				compatible = "fsl,imx25-wdt", "fsl,imx21-wdt";
+				reg = <0x53fdc000 0x4000>;
+				clocks = <&clks 126>;
+				clock-names = "";
+				interrupts = <55>;
+			};
+
+			pwm1: pwm@53fe0000 {
+				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
+				#pwm-cells = <2>;
+				reg = <0x53fe0000 0x4000>;
+				clocks = <&clks 105>, <&clks 36>;
+				clock-names = "ipg", "per";
+				interrupts = <26>;
+			};
+
+			usbphy1: usbphy@1 {
+				compatible = "nop-usbphy";
+				status = "disabled";
+			};
+
+			usbphy2: usbphy@2 {
+				compatible = "nop-usbphy";
+				status = "disabled";
+			};
+
+			usbotg: usb@53ff4000 {
+				compatible = "fsl,imx25-usb", "fsl,imx27-usb";
+				reg = <0x53ff4000 0x0200>;
+				interrupts = <37>;
+				clocks = <&clks 9>, <&clks 70>, <&clks 8>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,usbmisc = <&usbmisc 0>;
+				status = "disabled";
+			};
+
+			usbhost1: usb@53ff4400 {
+				compatible = "fsl,imx25-usb", "fsl,imx27-usb";
+				reg = <0x53ff4400 0x0200>;
+				interrupts = <35>;
+				clocks = <&clks 9>, <&clks 70>, <&clks 8>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,usbmisc = <&usbmisc 1>;
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@53ff4600 {
+				#index-cells = <1>;
+				compatible = "fsl,imx25-usbmisc";
+				clocks = <&clks 9>, <&clks 70>, <&clks 8>;
+				clock-names = "ipg", "ahb", "per";
+				reg = <0x53ff4600 0x00f>;
+				status = "disabled";
+			};
+
+			dryice@53ffc000 {
+				compatible = "fsl,imx25-dryice", "fsl,imx25-rtc";
+				reg = <0x53ffc000 0x4000>;
+				clocks = <&clks 81>;
+				clock-names = "ipg";
+				interrupts = <25>;
+			};
+		};
+
+		emi@80000000 {
+			compatible = "fsl,emi-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x80000000 0x3b002000>;
+			ranges;
+
+			nand@bb000000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				compatible = "fsl,imx25-nand";
+				reg = <0xbb000000 0x2000>;
+				clocks = <&clks 50>;
+				clock-names = "";
+				interrupts = <33>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx27-apf27.dts b/arch/arm/boot/dts/imx27-apf27.dts
new file mode 100644
index 0000000..c0327c0
--- /dev/null
+++ b/arch/arm/boot/dts/imx27-apf27.dts
@@ -0,0 +1,89 @@
+/*
+ * Copyright 2012 Philippe Reynes <tremyfr@yahoo.fr>
+ * Copyright 2012 Armadeus Systems <support@armadeus.com>
+ *
+ * Based on code which is: Copyright 2012 Sascha Hauer, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx27.dtsi"
+
+/ {
+	model = "Armadeus Systems APF27 module";
+	compatible = "armadeus,imx27-apf27", "fsl,imx27";
+
+	memory {
+		reg = <0xa0000000 0x04000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		osc26m {
+			compatible = "fsl,imx-osc26m", "fixed-clock";
+			clock-frequency = <0>;
+		};
+	};
+
+	soc {
+		aipi@10000000 {
+			serial@1000a000 {
+				status = "okay";
+			};
+
+			ethernet@1002b000 {
+				status = "okay";
+			};
+		};
+
+		nand@d8000000 {
+			status = "okay";
+			nand-bus-width = <16>;
+			nand-ecc-mode = "hw";
+			nand-on-flash-bbt;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x100000>;
+			};
+
+			partition@100000 {
+				label = "env";
+				reg = <0x100000 0x80000>;
+			};
+
+			partition@180000 {
+				label = "env2";
+				reg = <0x180000 0x80000>;
+			};
+
+			partition@200000 {
+				label = "firmware";
+				reg = <0x200000 0x80000>;
+			};
+
+			partition@280000 {
+				label = "dtb";
+				reg = <0x280000 0x80000>;
+			};
+
+			partition@300000 {
+				label = "kernel";
+				reg = <0x300000 0x500000>;
+			};
+
+			partition@800000 {
+				label = "rootfs";
+				reg = <0x800000 0xf800000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index 67d6727..b8d3905 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -58,7 +58,7 @@
 			reg = <0x10000000 0x10000000>;
 			ranges;
 
-			wdog@10002000 {
+			wdog: wdog@10002000 {
 				compatible = "fsl,imx27-wdt", "fsl,imx21-wdt";
 				reg = <0x10002000 0x4000>;
 				interrupts = <27>;
@@ -218,7 +218,8 @@
 				status = "disabled";
 			};
 		};
-		nand@d8000000 {
+
+		nfc: nand@d8000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 
diff --git a/arch/arm/boot/dts/imx28-apf28.dts b/arch/arm/boot/dts/imx28-apf28.dts
new file mode 100644
index 0000000..7eb0758
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-apf28.dts
@@ -0,0 +1,85 @@
+/*
+ * Copyright 2012 Armadeus Systems - <support@armadeus.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx28.dtsi"
+
+/ {
+	model = "Armadeus Systems APF28 module";
+	compatible = "armadeus,imx28-apf28", "fsl,imx28";
+
+	memory {
+		reg = <0x40000000 0x08000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			gpmi-nand@8000c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+				status = "okay";
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0 0x300000>;
+				};
+
+				partition@300000 {
+					label = "env";
+					reg = <0x300000 0x80000>;
+				};
+
+				partition@380000 {
+					label = "env2";
+					reg = <0x380000 0x80000>;
+				};
+
+				partition@400000 {
+					label = "dtb";
+					reg = <0x400000 0x80000>;
+				};
+
+				partition@480000 {
+					label = "splash";
+					reg = <0x480000 0x80000>;
+				};
+
+				partition@500000 {
+					label = "kernel";
+					reg = <0x500000 0x800000>;
+				};
+
+				partition@d00000 {
+					label = "rootfs";
+					reg = <0xd00000 0xf300000>;
+				};
+			};
+		};
+
+		apbx@80040000 {
+			duart: serial@80074000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>;
+			phy-reset-gpios = <&gpio4 13 0>;
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts
new file mode 100644
index 0000000..6d8865b
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-apf28dev.dts
@@ -0,0 +1,154 @@
+/*
+ * Copyright 2012 Armadeus Systems - <support@armadeus.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/* APF28Dev is a docking board for the APF28 SOM */
+/include/ "imx28-apf28.dts"
+
+/ {
+	model = "Armadeus Systems APF28Dev docking/development board";
+	compatible = "armadeus,imx28-apf28dev", "armadeus,imx28-apf28", "fsl,imx28";
+
+	apb@80000000 {
+		apbh@80000000 {
+			ssp0: ssp@80010000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a
+					&mmc0_cd_cfg &mmc0_sck_cfg>;
+				bus-width = <4>;
+				status = "okay";
+			};
+
+			ssp2: ssp@80014000 {
+				compatible = "fsl,imx28-spi";
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi2_pins_a>;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_apf28dev>;
+
+				hog_pins_apf28dev: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x1103 /* MX28_PAD_LCD_D16__GPIO_1_16 */
+						0x1113 /* MX28_PAD_LCD_D17__GPIO_1_17 */
+						0x1123 /* MX28_PAD_LCD_D18__GPIO_1_18 */
+						0x1133 /* MX28_PAD_LCD_D19__GPIO_1_19 */
+						0x1143 /* MX28_PAD_LCD_D20__GPIO_1_20 */
+						0x1153 /* MX28_PAD_LCD_D21__GPIO_1_21 */
+						0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				lcdif_pins_apf28dev: lcdif-apf28dev@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
+						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
+						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
+						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+			};
+
+			lcdif@80030000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&lcdif_16bit_pins_a
+						&lcdif_pins_apf28dev>;
+				status = "okay";
+			};
+		};
+
+		apbx@80040000 {
+			lradc@80050000 {
+				status = "okay";
+			};
+
+			i2c0: i2c@80058000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins_a>;
+				status = "okay";
+			};
+
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm3_pins_a &pwm4_pins_a>;
+				status = "okay";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+
+			usbphy1: usbphy@8007e000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			vbus-supply = <&reg_usb0_vbus>;
+			status = "okay";
+		};
+
+		usb1: usb@80090000 {
+			status = "okay";
+		};
+
+		mac1: ethernet@800f4000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac1_pins_a>;
+			phy-reset-gpios = <&gpio0 23 0>;
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_usb0_vbus: usb0_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb0_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 23 1>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user {
+			label = "Heartbeat";
+			gpios = <&gpio0 21 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+
+		pwms = <&pwm 3 191000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts
index c03a577..1594694 100644
--- a/arch/arm/boot/dts/imx28-cfa10036.dts
+++ b/arch/arm/boot/dts/imx28-cfa10036.dts
@@ -22,6 +22,31 @@
 
 	apb@80000000 {
 		apbh@80000000 {
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_cfa10036>;
+
+				hog_pins_cfa10036: hog-10036@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x2073 /* MX28_PAD_SSP0_D7__GPIO_2_7 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				led_pins_cfa10036: leds-10036@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x3043 /* MX28_PAD_AUART1_RX__GPIO_3_4 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+			};
+
 			ssp0: ssp@80010000 {
 				compatible = "fsl,imx28-mmc";
 				pinctrl-names = "default";
@@ -33,16 +58,37 @@
 		};
 
 		apbx@80040000 {
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm4_pins_a>;
+				status = "okay";
+			};
+
 			duart: serial@80074000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&duart_pins_b>;
 				status = "okay";
 			};
+
+			i2c0: i2c@80058000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins_b>;
+				status = "okay";
+
+				ssd1307: oled@3c {
+					compatible = "solomon,ssd1307fb-i2c";
+					reg = <0x3c>;
+					pwms = <&pwm 4 3000>;
+					reset-gpios = <&gpio2 7 0>;
+				};
+			};
 		};
 	};
 
 	leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins_cfa10036>;
 
 		power {
 			gpios = <&gpio3 4 1>;
diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts
index 05c892e..b222614 100644
--- a/arch/arm/boot/dts/imx28-cfa10049.dts
+++ b/arch/arm/boot/dts/imx28-cfa10049.dts
@@ -22,6 +22,22 @@
 	apb@80000000 {
 		apbh@80000000 {
 			pinctrl@80018000 {
+				pinctrl-names = "default", "default";
+				pinctrl-1 = <&hog_pins_cfa10049>;
+
+				hog_pins_cfa10049: hog-10049@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
+						0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */
+						0x1173 /* MX28_PAD_LCD_D22__GPIO_1_23 */
+						0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
 				spi3_pins_cfa10049: spi3-cfa10049@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
@@ -29,6 +45,7 @@
 						0x01c1 /* MX28_PAD_GPMI_RESETN__SSP3_CMD */
 						0x0111 /* MX28_PAD_GPMI_CE1N__SSP3_D3 */
 						0x01a2 /* MX28_PAD_GPMI_ALE__SSP3_D4 */
+						0x01b2 /* MX28_PAD_GPMI_CLE__SSP3_D5 */
 					>;
 					fsl,drive-strength = <1>;
 					fsl,voltage = <1>;
@@ -60,6 +77,11 @@
 					spi-max-frequency = <100000>;
 				};
 
+				dac0: dh2228@2 {
+					compatible = "rohm,dh2228fv";
+					reg = <2>;
+					spi-max-frequency = <100000>;
+				};
 			};
 		};
 
@@ -96,4 +118,15 @@
 			gpio = <&gpio0 7 1>;
 		};
 	};
+
+	ahb@80080000 {
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>;
+			phy-reset-gpios = <&gpio2 21 0>;
+			phy-reset-duration = <100>;
+			status = "okay";
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index a0ad71c..2da316e 100644
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -76,7 +76,6 @@
 						0x20c3 /* MX28_PAD_SSP1_SCK__GPIO_2_12 */
 						0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
 						0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
-						0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
 						0x3083 /* MX28_PAD_AUART2_RX__GPIO_3_8 */
 						0x3093 /* MX28_PAD_AUART2_TX__GPIO_3_9 */
 					>;
@@ -85,6 +84,16 @@
 					fsl,pull-up = <0>;
 				};
 
+				led_pin_gpio3_5: led_gpio3_5@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
 				gpmi_pins_evk: gpmi-nand-evk@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
@@ -288,6 +297,8 @@
 
 	leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_gpio3_5>;
 
 		user {
 			label = "Heartbeat";
diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts
new file mode 100644
index 0000000..e6cde8a
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-sps1.dts
@@ -0,0 +1,169 @@
+/*
+ * Copyright (C) 2012 Marek Vasut <marex@denx.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx28.dtsi"
+
+/ {
+	model = "SchulerControl GmbH, SC SPS 1";
+	compatible = "schulercontrol,imx28-sps1", "fsl,imx28";
+
+	memory {
+		reg = <0x40000000 0x08000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog-gpios@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x0003 /* MX28_PAD_GPMI_D00__GPIO_0_0 */
+						0x0033 /* MX28_PAD_GPMI_D03__GPIO_0_3 */
+						0x0063 /* MX28_PAD_GPMI_D06__GPIO_0_6 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+			};
+
+			ssp0: ssp@80010000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a>;
+				bus-width = <4>;
+				status = "okay";
+			};
+
+			ssp2: ssp@80014000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx28-spi";
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi2_pins_a>;
+				status = "okay";
+
+				flash: m25p80@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "everspin,mr25h256", "mr25h256";
+					spi-max-frequency = <40000000>;
+					reg = <0>;
+				};
+			};
+		};
+
+		apbx@80040000 {
+			i2c0: i2c@80058000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins_a>;
+				clock-frequency = <400000>;
+				status = "okay";
+
+				rtc: rtc@51 {
+					compatible = "nxp,pcf8563";
+					reg = <0x51>;
+				};
+
+				eeprom: eeprom@52 {
+					compatible = "atmel,24c64";
+					reg = <0x52>;
+					pagesize = <32>;
+				};
+			};
+
+			duart: serial@80074000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+
+			auart0: serial@8006a000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart0_pins_a>;
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			vbus-supply = <&reg_usb0_vbus>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usbphy0_pins_b>;
+			status = "okay";
+		};
+
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>;
+			status = "okay";
+		};
+
+		mac1: ethernet@800f4000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac1_pins_a>;
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_usb0_vbus: usb0_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb0_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 9 0>;
+		};
+	};
+
+	leds {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "gpio-leds";
+		status = "okay";
+
+		led@1 {
+			label = "sps1-1:yellow:user";
+			gpios = <&gpio0 6 0>;
+			linux,default-trigger = "heartbeat";
+			reg = <0>;
+		};
+
+		led@2 {
+			label = "sps1-2:red:user";
+			gpios = <&gpio0 3 0>;
+			linux,default-trigger = "heartbeat";
+			reg = <1>;
+		};
+
+		led@3 {
+			label = "sps1-3:red:user";
+			gpios = <&gpio0 0 0>;
+			default-trigger = "heartbeat";
+			reg = <2>;
+		};
+
+	};
+};
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index b4587b27..13b7053 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -492,6 +492,16 @@
 					fsl,pull-up = <0>;
 				};
 
+				pwm3_pins_a: pwm3@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x31c0 /* MX28_PAD_PWM3__PWM_3 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
 				pwm4_pins_a: pwm4@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
@@ -535,6 +545,31 @@
 					fsl,pull-up = <0>;
 				};
 
+				lcdif_16bit_pins_a: lcdif-16bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
+						0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
+						0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
+						0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
+						0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
+						0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
+						0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
+						0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
+						0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
+						0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
+						0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
+						0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
+						0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
+						0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
+						0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
+						0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
 				can0_pins_a: can0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 2781e47..1f5d45e 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -83,7 +83,7 @@
 				reg = <0x70000000 0x40000>;
 				ranges;
 
-				esdhc@70004000 { /* ESDHC1 */
+				esdhc1: esdhc@70004000 {
 					compatible = "fsl,imx51-esdhc";
 					reg = <0x70004000 0x4000>;
 					interrupts = <1>;
@@ -92,12 +92,13 @@
 					status = "disabled";
 				};
 
-				esdhc@70008000 { /* ESDHC2 */
+				esdhc2: esdhc@70008000 {
 					compatible = "fsl,imx51-esdhc";
 					reg = <0x70008000 0x4000>;
 					interrupts = <2>;
 					clocks = <&clks 45>, <&clks 0>, <&clks 72>;
 					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
 					status = "disabled";
 				};
 
@@ -110,7 +111,7 @@
 					status = "disabled";
 				};
 
-				ecspi@70010000 { /* ECSPI1 */
+				ecspi1: ecspi@70010000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx51-ecspi";
@@ -131,47 +132,49 @@
 					status = "disabled";
 				};
 
-				esdhc@70020000 { /* ESDHC3 */
+				esdhc3: esdhc@70020000 {
 					compatible = "fsl,imx51-esdhc";
 					reg = <0x70020000 0x4000>;
 					interrupts = <3>;
 					clocks = <&clks 46>, <&clks 0>, <&clks 73>;
 					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
 					status = "disabled";
 				};
 
-				esdhc@70024000 { /* ESDHC4 */
+				esdhc4: esdhc@70024000 {
 					compatible = "fsl,imx51-esdhc";
 					reg = <0x70024000 0x4000>;
 					interrupts = <4>;
 					clocks = <&clks 47>, <&clks 0>, <&clks 74>;
 					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
 					status = "disabled";
 				};
 			};
 
-			usb@73f80000 {
+			usbotg: usb@73f80000 {
 				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
 				reg = <0x73f80000 0x0200>;
 				interrupts = <18>;
 				status = "disabled";
 			};
 
-			usb@73f80200 {
+			usbh1: usb@73f80200 {
 				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
 				reg = <0x73f80200 0x0200>;
 				interrupts = <14>;
 				status = "disabled";
 			};
 
-			usb@73f80400 {
+			usbh2: usb@73f80400 {
 				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
 				reg = <0x73f80400 0x0200>;
 				interrupts = <16>;
 				status = "disabled";
 			};
 
-			usb@73f80600 {
+			usbh3: usb@73f80600 {
 				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
 				reg = <0x73f80600 0x0200>;
 				interrupts = <17>;
@@ -218,14 +221,14 @@
 				#interrupt-cells = <2>;
 			};
 
-			wdog@73f98000 { /* WDOG1 */
+			wdog1: wdog@73f98000 {
 				compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
 				reg = <0x73f98000 0x4000>;
 				interrupts = <58>;
 				clocks = <&clks 0>;
 			};
 
-			wdog@73f9c000 { /* WDOG2 */
+			wdog2: wdog@73f9c000 {
 				compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
 				reg = <0x73f9c000 0x4000>;
 				interrupts = <59>;
@@ -233,7 +236,7 @@
 				status = "disabled";
 			};
 
-			iomuxc@73fa8000 {
+			iomuxc: iomuxc@73fa8000 {
 				compatible = "fsl,imx51-iomuxc";
 				reg = <0x73fa8000 0x4000>;
 
@@ -460,7 +463,7 @@
 			reg = <0x80000000 0x10000000>;
 			ranges;
 
-			ecspi@83fac000 { /* ECSPI2 */
+			ecspi2: ecspi@83fac000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx51-ecspi";
@@ -471,7 +474,7 @@
 				status = "disabled";
 			};
 
-			sdma@83fb0000 {
+			sdma: sdma@83fb0000 {
 				compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
 				reg = <0x83fb0000 0x4000>;
 				interrupts = <6>;
@@ -480,7 +483,7 @@
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
 			};
 
-			cspi@83fc0000 {
+			cspi: cspi@83fc0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx51-cspi", "fsl,imx35-cspi";
@@ -491,7 +494,7 @@
 				status = "disabled";
 			};
 
-			i2c@83fc4000 { /* I2C2 */
+			i2c2: i2c@83fc4000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
@@ -501,7 +504,7 @@
 				status = "disabled";
 			};
 
-			i2c@83fc8000 { /* I2C1 */
+			i2c1: i2c@83fc8000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
@@ -521,13 +524,13 @@
 				status = "disabled";
 			};
 
-			audmux@83fd0000 {
+			audmux: audmux@83fd0000 {
 				compatible = "fsl,imx51-audmux", "fsl,imx31-audmux";
 				reg = <0x83fd0000 0x4000>;
 				status = "disabled";
 			};
 
-			nand@83fdb000 {
+			nfc: nand@83fdb000 {
 				compatible = "fsl,imx51-nand";
 				reg = <0x83fdb000 0x1000 0xcfff0000 0x10000>;
 				interrupts = <8>;
@@ -545,7 +548,7 @@
 				status = "disabled";
 			};
 
-			ethernet@83fec000 {
+			fec: ethernet@83fec000 {
 				compatible = "fsl,imx51-fec", "fsl,imx27-fec";
 				reg = <0x83fec000 0x4000>;
 				interrupts = <87>;
diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts
index 08948af..b007553 100644
--- a/arch/arm/boot/dts/imx53-qsb.dts
+++ b/arch/arm/boot/dts/imx53-qsb.dts
@@ -60,10 +60,17 @@
 							697  0x80000000	/* MX53_PAD_EIM_DA12__GPIO3_12 */
 							701  0x80000000	/* MX53_PAD_EIM_DA13__GPIO3_13 */
 							868  0x80000000	/* MX53_PAD_PATA_DA_0__GPIO7_6 */
+							1149 0x80000000 /* MX53_PAD_GPIO_16__GPIO7_11 */
+						>;
+					};
+
+					led_pin_gpio7_7: led_gpio7_7@0 {
+						fsl,pins = <
 							873  0x80000000	/* MX53_PAD_PATA_DA_1__GPIO7_7 */
 						>;
 					};
 				};
+
 			};
 
 			uart1: serial@53fbc000 {
@@ -100,76 +107,93 @@
 				pmic: dialog@48 {
 					compatible = "dlg,da9053-aa", "dlg,da9052";
 					reg = <0x48>;
+					interrupt-parent = <&gpio7>;
+					interrupts = <11 0x8>; /* low-level active IRQ at GPIO7_11 */
 
 					regulators {
-						buck0 {
+						buck1_reg: buck1 {
 							regulator-min-microvolt = <500000>;
 							regulator-max-microvolt = <2075000>;
+							regulator-always-on;
 						};
 
-						buck1 {
+						buck2_reg: buck2 {
 							regulator-min-microvolt = <500000>;
 							regulator-max-microvolt = <2075000>;
+							regulator-always-on;
 						};
 
-						buck2 {
+						buck3_reg: buck3 {
 							regulator-min-microvolt = <925000>;
 					                regulator-max-microvolt = <2500000>;
+							regulator-always-on;
 						};
 
-						buck3 {
+						buck4_reg: buck4 {
 							regulator-min-microvolt = <925000>;
 					                regulator-max-microvolt = <2500000>;
+							regulator-always-on;
 						};
 
-						ldo4 {
+						ldo1_reg: ldo1 {
 							regulator-min-microvolt = <600000>;
 							regulator-max-microvolt = <1800000>;
+							regulator-boot-on;
+							regulator-always-on;
 						};
 
-						ldo5 {
+						ldo2_reg: ldo2 {
+							regulator-min-microvolt = <600000>;
+							regulator-max-microvolt = <1800000>;
+							regulator-always-on;
+						};
+
+						ldo3_reg: ldo3 {
 							regulator-min-microvolt = <600000>;
 					                regulator-max-microvolt = <1800000>;
+							regulator-always-on;
 						};
 
-						ldo6 {
+						ldo4_reg: ldo4 {
 							regulator-min-microvolt = <1725000>;
 					                regulator-max-microvolt = <3300000>;
+							regulator-always-on;
 						};
 
-						ldo7 {
+						ldo5_reg: ldo5 {
 							regulator-min-microvolt = <1725000>;
 					                regulator-max-microvolt = <3300000>;
+							regulator-always-on;
 						};
 
-						ldo8 {
+						ldo6_reg: ldo6 {
 							regulator-min-microvolt = <1200000>;
 					                regulator-max-microvolt = <3600000>;
+							regulator-always-on;
 						};
 
-						ldo9 {
+						ldo7_reg: ldo7 {
 							regulator-min-microvolt = <1200000>;
 					                regulator-max-microvolt = <3600000>;
+							regulator-always-on;
 						};
 
-						ldo10 {
+						ldo8_reg: ldo8 {
 							regulator-min-microvolt = <1200000>;
 					                regulator-max-microvolt = <3600000>;
+							regulator-always-on;
 						};
 
-						ldo11 {
+						ldo9_reg: ldo9 {
 							regulator-min-microvolt = <1200000>;
 					                regulator-max-microvolt = <3600000>;
+							regulator-always-on;
 						};
 
-						ldo12 {
+						ldo10_reg: ldo10 {
 							regulator-min-microvolt = <1250000>;
 					                regulator-max-microvolt = <3650000>;
-						};
-
-						ldo13 {
-							regulator-min-microvolt = <1200000>;
-					                regulator-max-microvolt = <3600000>;
+							regulator-always-on;
 						};
 					};
 				};
@@ -216,6 +240,8 @@
 
 	leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pin_gpio7_7>;
 
 		user {
 			label = "Heartbeat";
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index da9a047..552aed4 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -88,21 +88,23 @@
 				reg = <0x50000000 0x40000>;
 				ranges;
 
-				esdhc@50004000 { /* ESDHC1 */
+				esdhc1: esdhc@50004000 {
 					compatible = "fsl,imx53-esdhc";
 					reg = <0x50004000 0x4000>;
 					interrupts = <1>;
 					clocks = <&clks 44>, <&clks 0>, <&clks 71>;
 					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
 					status = "disabled";
 				};
 
-				esdhc@50008000 { /* ESDHC2 */
+				esdhc2: esdhc@50008000 {
 					compatible = "fsl,imx53-esdhc";
 					reg = <0x50008000 0x4000>;
 					interrupts = <2>;
 					clocks = <&clks 45>, <&clks 0>, <&clks 72>;
 					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
 					status = "disabled";
 				};
 
@@ -115,7 +117,7 @@
 					status = "disabled";
 				};
 
-				ecspi@50010000 { /* ECSPI1 */
+				ecspi1: ecspi@50010000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
@@ -136,47 +138,49 @@
 					status = "disabled";
 				};
 
-				esdhc@50020000 { /* ESDHC3 */
+				esdhc3: esdhc@50020000 {
 					compatible = "fsl,imx53-esdhc";
 					reg = <0x50020000 0x4000>;
 					interrupts = <3>;
 					clocks = <&clks 46>, <&clks 0>, <&clks 73>;
 					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
 					status = "disabled";
 				};
 
-				esdhc@50024000 { /* ESDHC4 */
+				esdhc4: esdhc@50024000 {
 					compatible = "fsl,imx53-esdhc";
 					reg = <0x50024000 0x4000>;
 					interrupts = <4>;
 					clocks = <&clks 47>, <&clks 0>, <&clks 74>;
 					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
 					status = "disabled";
 				};
 			};
 
-			usb@53f80000 {
+			usbotg: usb@53f80000 {
 				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
 				reg = <0x53f80000 0x0200>;
 				interrupts = <18>;
 				status = "disabled";
 			};
 
-			usb@53f80200 {
+			usbh1: usb@53f80200 {
 				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
 				reg = <0x53f80200 0x0200>;
 				interrupts = <14>;
 				status = "disabled";
 			};
 
-			usb@53f80400 {
+			usbh2: usb@53f80400 {
 				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
 				reg = <0x53f80400 0x0200>;
 				interrupts = <16>;
 				status = "disabled";
 			};
 
-			usb@53f80600 {
+			usbh3: usb@53f80600 {
 				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
 				reg = <0x53f80600 0x0200>;
 				interrupts = <17>;
@@ -223,14 +227,14 @@
 				#interrupt-cells = <2>;
 			};
 
-			wdog@53f98000 { /* WDOG1 */
+			wdog1: wdog@53f98000 {
 				compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
 				reg = <0x53f98000 0x4000>;
 				interrupts = <58>;
 				clocks = <&clks 0>;
 			};
 
-			wdog@53f9c000 { /* WDOG2 */
+			wdog2: wdog@53f9c000 {
 				compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
 				reg = <0x53f9c000 0x4000>;
 				interrupts = <59>;
@@ -238,7 +242,7 @@
 				status = "disabled";
 			};
 
-			iomuxc@53fa8000 {
+			iomuxc: iomuxc@53fa8000 {
 				compatible = "fsl,imx53-iomuxc";
 				reg = <0x53fa8000 0x4000>;
 
@@ -338,6 +342,24 @@
 					};
 				};
 
+				can1 {
+					pinctrl_can1_1: can1grp-1 {
+						fsl,pins = <
+							847 0x80000000  /* MX53_PAD_PATA_INTRQ__CAN1_TXCAN */
+							853 0x80000000  /* MX53_PAD_PATA_DIOR__CAN1_RXCAN */
+						>;
+					};
+				};
+
+				can2 {
+					pinctrl_can2_1: can2grp-1 {
+						fsl,pins = <
+							67  0x80000000  /* MX53_PAD_KEY_COL4__CAN2_TXCAN */
+							74  0x80000000  /* MX53_PAD_KEY_ROW4__CAN2_RXCAN */
+						>;
+					};
+				};
+
 				i2c1 {
 					pinctrl_i2c1_1: i2c1grp-1 {
 						fsl,pins = <
@@ -356,6 +378,15 @@
 					};
 				};
 
+				i2c3 {
+					pinctrl_i2c3_1: i2c3grp-1 {
+						fsl,pins = <
+							1102 0xc0000000	/* MX53_PAD_GPIO_6__I2C3_SDA */
+							1130 0xc0000000	/* MX53_PAD_GPIO_5__I2C3_SCL */
+						>;
+					};
+				};
+
 				uart1 {
 					pinctrl_uart1_1: uart1grp-1 {
 						fsl,pins = <
@@ -391,6 +422,25 @@
 						>;
 					};
 				};
+
+				uart4 {
+					pinctrl_uart4_1: uart4grp-1 {
+						fsl,pins = <
+							11 0x1c5	/* MX53_PAD_KEY_COL0__UART4_TXD_MUX */
+							18 0x1c5	/* MX53_PAD_KEY_ROW0__UART4_RXD_MUX */
+						>;
+					};
+				};
+
+				uart5 {
+					pinctrl_uart5_1: uart5grp-1 {
+						fsl,pins = <
+							24 0x1c5	/* MX53_PAD_KEY_COL1__UART5_TXD_MUX */
+							31 0x1c5	/* MX53_PAD_KEY_ROW1__UART5_RXD_MUX */
+						>;
+					};
+				};
+
 			};
 
 			pwm1: pwm@53fb4000 {
@@ -484,7 +534,7 @@
 				#interrupt-cells = <2>;
 			};
 
-			i2c@53fec000 { /* I2C3 */
+			i2c3: i2c@53fec000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
@@ -520,7 +570,7 @@
 				status = "disabled";
 			};
 
-			ecspi@63fac000 { /* ECSPI2 */
+			ecspi2: ecspi@63fac000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
@@ -531,7 +581,7 @@
 				status = "disabled";
 			};
 
-			sdma@63fb0000 {
+			sdma: sdma@63fb0000 {
 				compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
 				reg = <0x63fb0000 0x4000>;
 				interrupts = <6>;
@@ -540,7 +590,7 @@
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
 			};
 
-			cspi@63fc0000 {
+			cspi: cspi@63fc0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
@@ -551,7 +601,7 @@
 				status = "disabled";
 			};
 
-			i2c@63fc4000 { /* I2C2 */
+			i2c2: i2c@63fc4000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
@@ -561,7 +611,7 @@
 				status = "disabled";
 			};
 
-			i2c@63fc8000 { /* I2C1 */
+			i2c1: i2c@63fc8000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
@@ -581,13 +631,13 @@
 				status = "disabled";
 			};
 
-			audmux@63fd0000 {
+			audmux: audmux@63fd0000 {
 				compatible = "fsl,imx53-audmux", "fsl,imx31-audmux";
 				reg = <0x63fd0000 0x4000>;
 				status = "disabled";
 			};
 
-			nand@63fdb000 {
+			nfc: nand@63fdb000 {
 				compatible = "fsl,imx53-nand";
 				reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>;
 				interrupts = <8>;
@@ -605,7 +655,7 @@
 				status = "disabled";
 			};
 
-			ethernet@63fec000 {
+			fec: ethernet@63fec000 {
 				compatible = "fsl,imx53-fec", "fsl,imx25-fec";
 				reg = <0x63fec000 0x4000>;
 				interrupts = <87>;
diff --git a/arch/arm/boot/dts/imx6q-sabreauto.dts b/arch/arm/boot/dts/imx6q-sabreauto.dts
new file mode 100644
index 0000000..826e4ad
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-sabreauto.dts
@@ -0,0 +1,64 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx6q.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Quad SABRE Automotive Board";
+	compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
+
+	memory {
+		reg = <0x10000000 0x80000000>;
+	};
+
+	soc {
+		aips-bus@02000000 { /* AIPS1 */
+			iomuxc@020e0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_hog>;
+
+				hog {
+					pinctrl_hog: hoggrp {
+						fsl,pins = <
+							1376 0x80000000	/* MX6Q_PAD_NANDF_CS2__GPIO_6_15 */
+							13   0x80000000	/* MX6Q_PAD_SD2_DAT2__GPIO_1_13 */
+						>;
+					};
+				};
+			};
+		};
+
+		aips-bus@02100000 { /* AIPS2 */
+			uart4: serial@021f0000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart4_1>;
+				status = "okay";
+			};
+
+			ethernet@02188000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_enet_2>;
+				phy-mode = "rgmii";
+				status = "okay";
+			};
+
+			usdhc@02198000 { /* uSDHC3 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_usdhc3_1>;
+				cd-gpios = <&gpio6 15 0>;
+				wp-gpios = <&gpio1 13 0>;
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts
index e596c28c..a424025 100644
--- a/arch/arm/boot/dts/imx6q-sabresd.dts
+++ b/arch/arm/boot/dts/imx6q-sabresd.dts
@@ -38,6 +38,8 @@
 				hog {
 					pinctrl_hog: hoggrp {
 						fsl,pins = <
+							1004 0x80000000 /* MX6Q_PAD_GPIO_4__GPIO_1_4 */
+							1012 0x80000000 /* MX6Q_PAD_GPIO_5__GPIO_1_5 */
 							1402 0x80000000	/* MX6Q_PAD_NANDF_D0__GPIO_2_0 */
 							1410 0x80000000	/* MX6Q_PAD_NANDF_D1__GPIO_2_1 */
 							1418 0x80000000	/* MX6Q_PAD_NANDF_D2__GPIO_2_2 */
@@ -73,4 +75,20 @@
 			};
 		};
 	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio1 4 0>;
+			linux,code = <115>; /* KEY_VOLUMEUP */
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio1 5 0>;
+			linux,code = <114>; /* KEY_VOLUMEDOWN */
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index cce1d87..d6265ca 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -36,6 +36,14 @@
 			compatible = "arm,cortex-a9";
 			reg = <0>;
 			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				792000  1100000
+				396000  950000
+				198000  850000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			cpu0-supply = <&reg_cpu>;
 		};
 
 		cpu@1 {
@@ -100,7 +108,7 @@
 			clocks = <&clks 106>;
 		};
 
-		gpmi-nand@00112000 {
+		nfc: gpmi-nand@00112000 {
 			compatible = "fsl,imx6q-gpmi-nand";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -144,12 +152,12 @@
 				reg = <0x02000000 0x40000>;
 				ranges;
 
-				spdif@02004000 {
+				spdif: spdif@02004000 {
 					reg = <0x02004000 0x4000>;
 					interrupts = <0 52 0x04>;
 				};
 
-				ecspi@02008000 { /* eCSPI1 */
+				ecspi1: ecspi@02008000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -160,7 +168,7 @@
 					status = "disabled";
 				};
 
-				ecspi@0200c000 { /* eCSPI2 */
+				ecspi2: ecspi@0200c000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -171,7 +179,7 @@
 					status = "disabled";
 				};
 
-				ecspi@02010000 { /* eCSPI3 */
+				ecspi3: ecspi@02010000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -182,7 +190,7 @@
 					status = "disabled";
 				};
 
-				ecspi@02014000 { /* eCSPI4 */
+				ecspi4: ecspi@02014000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -193,7 +201,7 @@
 					status = "disabled";
 				};
 
-				ecspi@02018000 { /* eCSPI5 */
+				ecspi5: ecspi@02018000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -213,7 +221,7 @@
 					status = "disabled";
 				};
 
-				esai@02024000 {
+				esai: esai@02024000 {
 					reg = <0x02024000 0x4000>;
 					interrupts = <0 51 0x04>;
 				};
@@ -248,7 +256,7 @@
 					status = "disabled";
 				};
 
-				asrc@02034000 {
+				asrc: asrc@02034000 {
 					reg = <0x02034000 0x4000>;
 					interrupts = <0 50 0x04>;
 				};
@@ -258,7 +266,7 @@
 				};
 			};
 
-			vpu@02040000 {
+			vpu: vpu@02040000 {
 				reg = <0x02040000 0x3c000>;
 				interrupts = <0 3 0x04 0 12 0x04>;
 			};
@@ -267,7 +275,7 @@
 				reg = <0x0207c000 0x4000>;
 			};
 
-			pwm@02080000 { /* PWM1 */
+			pwm1: pwm@02080000 {
 				#pwm-cells = <2>;
 				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 				reg = <0x02080000 0x4000>;
@@ -276,7 +284,7 @@
 				clock-names = "ipg", "per";
 			};
 
-			pwm@02084000 { /* PWM2 */
+			pwm2: pwm@02084000 {
 				#pwm-cells = <2>;
 				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 				reg = <0x02084000 0x4000>;
@@ -285,7 +293,7 @@
 				clock-names = "ipg", "per";
 			};
 
-			pwm@02088000 { /* PWM3 */
+			pwm3: pwm@02088000 {
 				#pwm-cells = <2>;
 				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 				reg = <0x02088000 0x4000>;
@@ -294,7 +302,7 @@
 				clock-names = "ipg", "per";
 			};
 
-			pwm@0208c000 { /* PWM4 */
+			pwm4: pwm@0208c000 {
 				#pwm-cells = <2>;
 				compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
 				reg = <0x0208c000 0x4000>;
@@ -303,17 +311,17 @@
 				clock-names = "ipg", "per";
 			};
 
-			flexcan@02090000 { /* CAN1 */
+			can1: flexcan@02090000 {
 				reg = <0x02090000 0x4000>;
 				interrupts = <0 110 0x04>;
 			};
 
-			flexcan@02094000 { /* CAN2 */
+			can2: flexcan@02094000 {
 				reg = <0x02094000 0x4000>;
 				interrupts = <0 111 0x04>;
 			};
 
-			gpt@02098000 {
+			gpt: gpt@02098000 {
 				compatible = "fsl,imx6q-gpt";
 				reg = <0x02098000 0x4000>;
 				interrupts = <0 55 0x04>;
@@ -389,19 +397,19 @@
 				#interrupt-cells = <2>;
 			};
 
-			kpp@020b8000 {
+			kpp: kpp@020b8000 {
 				reg = <0x020b8000 0x4000>;
 				interrupts = <0 82 0x04>;
 			};
 
-			wdog@020bc000 { /* WDOG1 */
+			wdog1: wdog@020bc000 {
 				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
 				reg = <0x020bc000 0x4000>;
 				interrupts = <0 80 0x04>;
 				clocks = <&clks 0>;
 			};
 
-			wdog@020c0000 { /* WDOG2 */
+			wdog2: wdog@020c0000 {
 				compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
 				reg = <0x020c0000 0x4000>;
 				interrupts = <0 81 0x04>;
@@ -463,7 +471,7 @@
 					anatop-max-voltage = <2750000>;
 				};
 
-				regulator-vddcore@140 {
+				reg_cpu: regulator-vddcore@140 {
 					compatible = "fsl,anatop-regulator";
 					regulator-name = "cpu";
 					regulator-min-microvolt = <725000>;
@@ -521,27 +529,35 @@
 			};
 
 			snvs@020cc000 {
-				reg = <0x020cc000 0x4000>;
-				interrupts = <0 19 0x04 0 20 0x04>;
+				compatible = "fsl,sec-v4.0-mon", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x020cc000 0x4000>;
+
+				snvs-rtc-lp@34 {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					reg = <0x34 0x58>;
+					interrupts = <0 19 0x04 0 20 0x04>;
+				};
 			};
 
-			epit@020d0000 { /* EPIT1 */
+			epit1: epit@020d0000 { /* EPIT1 */
 				reg = <0x020d0000 0x4000>;
 				interrupts = <0 56 0x04>;
 			};
 
-			epit@020d4000 { /* EPIT2 */
+			epit2: epit@020d4000 { /* EPIT2 */
 				reg = <0x020d4000 0x4000>;
 				interrupts = <0 57 0x04>;
 			};
 
-			src@020d8000 {
+			src: src@020d8000 {
 				compatible = "fsl,imx6q-src";
 				reg = <0x020d8000 0x4000>;
 				interrupts = <0 91 0x04 0 96 0x04>;
 			};
 
-			gpc@020dc000 {
+			gpc: gpc@020dc000 {
 				compatible = "fsl,imx6q-gpc";
 				reg = <0x020dc000 0x4000>;
 				interrupts = <0 89 0x04 0 90 0x04>;
@@ -552,7 +568,7 @@
 				reg = <0x020e0000 0x38>;
 			};
 
-			iomuxc@020e0000 {
+			iomuxc: iomuxc@020e0000 {
 				compatible = "fsl,imx6q-iomuxc";
 				reg = <0x020e0000 0x4000>;
 
@@ -765,17 +781,17 @@
 				};
 			};
 
-			dcic@020e4000 { /* DCIC1 */
+			dcic1: dcic@020e4000 {
 				reg = <0x020e4000 0x4000>;
 				interrupts = <0 124 0x04>;
 			};
 
-			dcic@020e8000 { /* DCIC2 */
+			dcic2: dcic@020e8000 {
 				reg = <0x020e8000 0x4000>;
 				interrupts = <0 125 0x04>;
 			};
 
-			sdma@020ec000 {
+			sdma: sdma@020ec000 {
 				compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
 				reg = <0x020ec000 0x4000>;
 				interrupts = <0 2 0x04>;
@@ -801,7 +817,7 @@
 				reg = <0x0217c000 0x4000>;
 			};
 
-			usb@02184000 { /* USB OTG */
+			usbotg: usb@02184000 {
 				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 				reg = <0x02184000 0x200>;
 				interrupts = <0 43 0x04>;
@@ -811,7 +827,7 @@
 				status = "disabled";
 			};
 
-			usb@02184200 { /* USB1 */
+			usbh1: usb@02184200 {
 				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 				reg = <0x02184200 0x200>;
 				interrupts = <0 40 0x04>;
@@ -821,7 +837,7 @@
 				status = "disabled";
 			};
 
-			usb@02184400 { /* USB2 */
+			usbh2: usb@02184400 {
 				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 				reg = <0x02184400 0x200>;
 				interrupts = <0 41 0x04>;
@@ -830,7 +846,7 @@
 				status = "disabled";
 			};
 
-			usb@02184600 { /* USB3 */
+			usbh3: usb@02184600 {
 				compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
 				reg = <0x02184600 0x200>;
 				interrupts = <0 42 0x04>;
@@ -839,14 +855,14 @@
 				status = "disabled";
 			};
 
-			usbmisc: usbmisc@02184800 {
+			usbmisc: usbmisc: usbmisc@02184800 {
 				#index-cells = <1>;
 				compatible = "fsl,imx6q-usbmisc";
 				reg = <0x02184800 0x200>;
 				clocks = <&clks 162>;
 			};
 
-			ethernet@02188000 {
+			fec: ethernet@02188000 {
 				compatible = "fsl,imx6q-fec";
 				reg = <0x02188000 0x4000>;
 				interrupts = <0 118 0x04 0 119 0x04>;
@@ -860,43 +876,47 @@
 				interrupts = <0 53 0x04 0 117 0x04 0 126 0x04>;
 			};
 
-			usdhc@02190000 { /* uSDHC1 */
+			usdhc1: usdhc@02190000 {
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x02190000 0x4000>;
 				interrupts = <0 22 0x04>;
 				clocks = <&clks 163>, <&clks 163>, <&clks 163>;
 				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
 				status = "disabled";
 			};
 
-			usdhc@02194000 { /* uSDHC2 */
+			usdhc2: usdhc@02194000 {
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x02194000 0x4000>;
 				interrupts = <0 23 0x04>;
 				clocks = <&clks 164>, <&clks 164>, <&clks 164>;
 				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
 				status = "disabled";
 			};
 
-			usdhc@02198000 { /* uSDHC3 */
+			usdhc3: usdhc@02198000 {
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x02198000 0x4000>;
 				interrupts = <0 24 0x04>;
 				clocks = <&clks 165>, <&clks 165>, <&clks 165>;
 				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
 				status = "disabled";
 			};
 
-			usdhc@0219c000 { /* uSDHC4 */
+			usdhc4: usdhc@0219c000 {
 				compatible = "fsl,imx6q-usdhc";
 				reg = <0x0219c000 0x4000>;
 				interrupts = <0 25 0x04>;
 				clocks = <&clks 166>, <&clks 166>, <&clks 166>;
 				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
 				status = "disabled";
 			};
 
-			i2c@021a0000 { /* I2C1 */
+			i2c1: i2c@021a0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
@@ -906,7 +926,7 @@
 				status = "disabled";
 			};
 
-			i2c@021a4000 { /* I2C2 */
+			i2c2: i2c@021a4000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
@@ -916,7 +936,7 @@
 				status = "disabled";
 			};
 
-			i2c@021a8000 { /* I2C3 */
+			i2c3: i2c@021a8000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
@@ -930,12 +950,12 @@
 				reg = <0x021ac000 0x4000>;
 			};
 
-			mmdc@021b0000 { /* MMDC0 */
+			mmdc0: mmdc@021b0000 { /* MMDC0 */
 				compatible = "fsl,imx6q-mmdc";
 				reg = <0x021b0000 0x4000>;
 			};
 
-			mmdc@021b4000 { /* MMDC1 */
+			mmdc1: mmdc@021b4000 { /* MMDC1 */
 				reg = <0x021b4000 0x4000>;
 			};
 
@@ -963,7 +983,7 @@
 				interrupts = <0 109 0x04>;
 			};
 
-			audmux@021d8000 {
+			audmux: audmux@021d8000 {
 				compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
 				reg = <0x021d8000 0x4000>;
 				status = "disabled";
diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi
new file mode 100644
index 0000000..d6c9d65
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-6281.dtsi
@@ -0,0 +1,44 @@
+/ {
+	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+			compatible = "marvell,88f6281-pinctrl";
+			reg = <0x10000 0x20>;
+
+			pmx_nand: pmx-nand {
+				marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
+					       "mpp4", "mpp5", "mpp18",
+					       "mpp19";
+				marvell,function = "nand";
+			};
+			pmx_sata0: pmx-sata0 {
+				marvell,pins = "mpp5", "mpp21", "mpp23";
+				marvell,function = "sata0";
+			};
+			pmx_sata1: pmx-sata1 {
+				marvell,pins = "mpp4", "mpp20", "mpp22";
+				marvell,function = "sata1";
+			};
+			pmx_spi: pmx-spi {
+				marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3";
+				marvell,function = "spi";
+			};
+			pmx_twsi0: pmx-twsi0 {
+				marvell,pins = "mpp8", "mpp9";
+				marvell,function = "twsi0";
+			};
+			pmx_uart0: pmx-uart0 {
+				marvell,pins = "mpp10", "mpp11";
+				marvell,function = "uart0";
+			};
+			pmx_uart1: pmx-uart1 {
+				marvell,pins = "mpp13", "mpp14";
+				marvell,function = "uart1";
+			};
+			pmx_sdio: pmx-sdio {
+				marvell,pins = "mpp12", "mpp13", "mpp14",
+					       "mpp15", "mpp16", "mpp17";
+				marvell,function = "sdio";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi
new file mode 100644
index 0000000..9ae2004
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-6282.dtsi
@@ -0,0 +1,45 @@
+/ {
+	ocp@f1000000 {
+
+		pinctrl: pinctrl@10000 {
+			compatible = "marvell,88f6282-pinctrl";
+			reg = <0x10000 0x20>;
+
+			pmx_sata0: pmx-sata0 {
+				marvell,pins = "mpp5", "mpp21", "mpp23";
+				marvell,function = "sata0";
+			};
+			pmx_sata1: pmx-sata1 {
+				marvell,pins = "mpp4", "mpp20", "mpp22";
+				marvell,function = "sata1";
+			};
+			pmx_spi: pmx-spi {
+				marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3";
+				marvell,function = "spi";
+			};
+			pmx_twsi0: pmx-twsi0 {
+				marvell,pins = "mpp8", "mpp9";
+				marvell,function = "twsi0";
+			};
+			pmx_uart0: pmx-uart0 {
+				marvell,pins = "mpp10", "mpp11";
+				marvell,function = "uart0";
+			};
+
+			pmx_uart1: pmx-uart1 {
+				marvell,pins = "mpp13", "mpp14";
+				marvell,function = "uart1";
+			};
+		};
+
+		i2c@11100 {
+			compatible = "marvell,mv64xxx-i2c";
+			reg = <0x11100 0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <32>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi
new file mode 100644
index 0000000..3271e4c
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi
@@ -0,0 +1,31 @@
+/ {
+	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+			compatible = "marvell,98dx4122-pinctrl";
+			reg = <0x10000 0x20>;
+
+			pmx_nand: pmx-nand {
+				marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
+					       "mpp4", "mpp5", "mpp18",
+					       "mpp19";
+				marvell,function = "nand";
+			};
+			pmx_spi: pmx-spi {
+				marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3";
+				marvell,function = "spi";
+			};
+			pmx_twsi0: pmx-twsi0 {
+				marvell,pins = "mpp8", "mpp9";
+				marvell,function = "twsi0";
+			};
+			pmx_uart0: pmx-uart0 {
+				marvell,pins = "mpp10", "mpp11";
+				marvell,function = "uart0";
+			};
+			pmx_uart1: pmx-uart1 {
+				marvell,pins = "mpp13", "mpp14";
+				marvell,function = "uart1";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
index 9b32d02..6875ac0 100644
--- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi
+++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi
@@ -1,4 +1,5 @@
 /include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
 
 / {
 	model = "D-Link DNS NASes (kirkwood-based)";
@@ -35,7 +36,116 @@
 				      6000 2>;
 	};
 
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio1 4 0>;
+	};
+
 	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+
+			pinctrl-0 = < &pmx_nand &pmx_uart1
+				      &pmx_sata0 &pmx_sata1
+				      &pmx_led_power
+				      &pmx_led_red_right_hdd
+				      &pmx_led_red_left_hdd
+				      &pmx_led_red_usb_325
+				      &pmx_button_power
+				      &pmx_led_red_usb_320
+				      &pmx_power_off &pmx_power_back_on
+				      &pmx_power_sata0 &pmx_power_sata1
+				      &pmx_present_sata0 &pmx_present_sata1
+				      &pmx_led_white_usb &pmx_fan_tacho
+				      &pmx_fan_high_speed &pmx_fan_low_speed
+				      &pmx_button_unmount &pmx_button_reset
+				      &pmx_temp_alarm >;
+			pinctrl-names = "default";
+
+			pmx_sata0: pmx-sata0 {
+				marvell,pins = "mpp20";
+				marvell,function = "sata1";
+			};
+			pmx_sata1: pmx-sata1 {
+				marvell,pins = "mpp21";
+				marvell,function = "sata0";
+			};
+			pmx_led_power: pmx-led-power {
+				marvell,pins = "mpp26";
+				marvell,function = "gpio";
+			};
+			pmx_led_red_right_hdd: pmx-led-red-right-hdd {
+				marvell,pins = "mpp27";
+				marvell,function = "gpio";
+			};
+			pmx_led_red_left_hdd: pmx-led-red-left-hdd {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+			pmx_led_red_usb_325: pmx-led-red-usb-325 {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+			pmx_button_power: pmx-button-power {
+				marvell,pins = "mpp34";
+				marvell,function = "gpio";
+			};
+			pmx_led_red_usb_320: pmx-led-red-usb-320 {
+				marvell,pins = "mpp35";
+				marvell,function = "gpio";
+			};
+			pmx_power_off: pmx-power-off {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+			pmx_power_back_on: pmx-power-back-on {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+			pmx_power_sata0: pmx-power-sata0 {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+			pmx_power_sata1: pmx-power-sata1 {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+			pmx_present_sata0: pmx-present-sata0 {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+			pmx_present_sata1: pmx-present-sata1 {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_led_white_usb: pmx-led-white-usb {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_fan_tacho: pmx-fan-tacho {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+			pmx_fan_high_speed: pmx-fan-high-speed {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+			pmx_fan_low_speed: pmx-fan-low-speed {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_button_unmount: pmx-button-unmount {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+			pmx_button_reset: pmx-button-reset {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+			pmx_temp_alarm: pmx-temp-alarm {
+				marvell,pins = "mpp49";
+				marvell,function = "gpio";
+			};
+		};
 		sata@80000 {
 			status = "okay";
 			nr-ports = <2>;
@@ -43,6 +153,7 @@
 
 		nand@3000000 {
 			status = "okay";
+			chip-delay = <35>;
 
 			partition@0 {
 				label = "u-boot";
@@ -76,4 +187,33 @@
 			};
 		};
 	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sata0_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA0 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 7 0>;
+		};
+		sata1_power: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "SATA1 Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 8 0>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts
index 08a5824..2e3dd34 100644
--- a/arch/arm/boot/dts/kirkwood-dockstar.dts
+++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
@@ -1,6 +1,7 @@
 /dts-v1/;
 
 /include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
 
 / {
 	model = "Seagate FreeAgent Dockstar";
@@ -16,6 +17,25 @@
 	};
 
 	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+
+			pinctrl-0 = < &pmx_usb_power_enable
+				      &pmx_led_green &pmx_led_orange >;
+			pinctrl-names = "default";
+
+			pmx_usb_power_enable: pmx-usb-power-enable {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+			pmx_led_green: pmx-led-green {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_led_orange: pmx-led-orange {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+		};
 		serial@12000 {
 			clock-frequency = <200000000>;
 			status = "ok";
@@ -54,4 +74,21 @@
 			gpios = <&gpio1 15 1>;
 		};
 	};
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 29 0>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts
index 26e281f..f2d386c 100644
--- a/arch/arm/boot/dts/kirkwood-dreamplug.dts
+++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts
@@ -1,6 +1,7 @@
 /dts-v1/;
 
 /include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
 
 / {
 	model = "Globalscale Technologies Dreamplug";
@@ -16,6 +17,26 @@
 	};
 
 	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+
+			pinctrl-0 = < &pmx_spi
+				      &pmx_led_bluetooth &pmx_led_wifi
+				      &pmx_led_wifi_ap >;
+			pinctrl-names = "default";
+
+			pmx_led_bluetooth: pmx-led-bluetooth {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+			pmx_led_wifi: pmx-led-wifi {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+			pmx_led_wifi_ap: pmx-led-wifi-ap {
+				marvell,pins = "mpp49";
+				marvell,function = "gpio";
+			};
+		};
 		serial@12000 {
 			clock-frequency = <200000000>;
 			status = "ok";
diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts
index 7c8238f..1b133e0 100644
--- a/arch/arm/boot/dts/kirkwood-goflexnet.dts
+++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts
@@ -1,6 +1,7 @@
 /dts-v1/;
 
 /include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
 
 / {
 	model = "Seagate GoFlex Net";
@@ -16,6 +17,61 @@
 	};
 
 	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+
+			pinctrl-0 = < &pmx_usb_power_enable &pmx_led_orange
+				      &pmx_led_left_cap_0 &pmx_led_left_cap_1
+				      &pmx_led_left_cap_2 &pmx_led_left_cap_3
+				      &pmx_led_right_cap_0 &pmx_led_right_cap_1
+				      &pmx_led_right_cap_2 &pmx_led_right_cap_3
+				    >;
+			pinctrl-names = "default";
+
+			pmx_usb_power_enable: pmx-usb-power-enable {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+			pmx_led_right_cap_0: pmx-led_right_cap_0 {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+			pmx_led_right_cap_1: pmx-led_right_cap_1 {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+			pmx_led_right_cap_2: pmx-led_right_cap_2 {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+			pmx_led_right_cap_3: pmx-led_right_cap_3 {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+			pmx_led_left_cap_0: pmx-led_left_cap_0 {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_led_left_cap_1: pmx-led_left_cap_1 {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_led_left_cap_2: pmx-led_left_cap_2 {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+			pmx_led_left_cap_3: pmx-led_left_cap_3 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+			pmx_led_green: pmx-led_green {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_led_orange: pmx-led_orange {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+		};
 		serial@12000 {
 			clock-frequency = <200000000>;
 			status = "ok";
@@ -96,4 +152,21 @@
 			gpios = <&gpio1 9 0>;
 		};
 	};
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 29 0>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts
index 66794ed..71902da 100644
--- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
@@ -1,6 +1,7 @@
 /dts-v1/;
 
 /include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
 
 / {
 	model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)";
@@ -16,6 +17,39 @@
 	};
 
 	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+
+			pinctrl-0 = < &pmx_nand
+				      &pmx_led_os_red &pmx_power_off
+				      &pmx_led_os_green &pmx_led_usb_transfer
+				      &pmx_button_reset &pmx_button_usb_copy >;
+			pinctrl-names = "default";
+
+			pmx_led_os_red: pmx-led-os-red {
+				marvell,pins = "mpp22";
+				marvell,function = "gpio";
+			};
+			pmx_power_off: pmx-power-off {
+				marvell,pins = "mpp24";
+				marvell,function = "gpio";
+			};
+			pmx_led_os_green: pmx-led-os-green {
+				marvell,pins = "mpp25";
+				marvell,function = "gpio";
+			};
+			pmx_led_usb_transfer: pmx-led-usb-transfer {
+				marvell,pins = "mpp27";
+				marvell,function = "gpio";
+			};
+			pmx_button_reset: pmx-button-reset {
+				marvell,pins = "mpp28";
+				marvell,function = "gpio";
+			};
+			pmx_button_usb_copy: pmx-button-usb-copy {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+		};
 		serial@12000 {
 			clock-frequency = <200000000>;
 			status = "okay";
@@ -79,4 +113,10 @@
 			gpios = <&gpio0 27 0>;
 		};
 	};
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio0 24 0>;
+	};
+
+
 };
diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts
index d97cd9d..504f16b 100644
--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
@@ -1,6 +1,7 @@
 /dts-v1/;
 
 /include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
 
 / {
 	model = "Iomega Iconnect";
@@ -18,6 +19,56 @@
 	};
 
 	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+
+			pinctrl-0 = < &pmx_gpio_12 &pmx_gpio_35
+				      &pmx_gpio_41 &pmx_gpio_42
+				      &pmx_gpio_43 &pmx_gpio_44
+				      &pmx_gpio_45 &pmx_gpio_46
+				      &pmx_gpio_47 &pmx_gpio_48 >;
+			pinctrl-names = "default";
+
+			pmx_gpio_12: pmx-gpio-12 {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+			pmx_gpio_35: pmx-gpio-35 {
+				marvell,pins = "mpp35";
+				marvell,function = "gpio";
+			};
+			pmx_gpio_41: pmx-gpio-41 {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+			pmx_gpio_42: pmx-gpio-42 {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_gpio_43: pmx-gpio-43 {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_gpio_44: pmx-gpio-44 {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+			pmx_gpio_45: pmx-gpio-45 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+			pmx_gpio_46: pmx-gpio-46 {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+			pmx_gpio_47: pmx-gpio-47 {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+			pmx_gpio_48: pmx-gpio-48 {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+		};
 		i2c@11000 {
 			status = "okay";
 
diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
index 865aeec..6cae459 100644
--- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
+++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
@@ -1,6 +1,7 @@
 /dts-v1/;
 
 /include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
 
 / {
 	model = "Iomega StorCenter ix2-200";
@@ -16,6 +17,94 @@
 	};
 
 	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+
+			pinctrl-0 = < &pmx_button_reset &pmx_button_power
+				      &pmx_led_backup &pmx_led_power
+				      &pmx_button_otb &pmx_led_rebuild
+				      &pmx_led_health
+				      &pmx_led_sata_brt_ctrl_1
+				      &pmx_led_sata_brt_ctrl_2
+				      &pmx_led_backup_brt_ctrl_1
+				      &pmx_led_backup_brt_ctrl_2
+				      &pmx_led_power_brt_ctrl_1
+				      &pmx_led_power_brt_ctrl_2
+				      &pmx_led_health_brt_ctrl_1
+				      &pmx_led_health_brt_ctrl_2
+				      &pmx_led_rebuild_brt_ctrl_1
+				      &pmx_led_rebuild_brt_ctrl_2 >;
+			pinctrl-names = "default";
+
+			pmx_button_reset: pmx-button-reset {
+				marvell,pins = "mpp12";
+				marvell,function = "gpio";
+			};
+			pmx_button_power: pmx-button-power {
+				marvell,pins = "mpp14";
+				marvell,function = "gpio";
+			};
+			pmx_led_backup: pmx-led-backup {
+				marvell,pins = "mpp15";
+				marvell,function = "gpio";
+			};
+			pmx_led_power: pmx-led-power {
+				marvell,pins = "mpp16";
+				marvell,function = "gpio";
+			};
+			pmx_button_otb: pmx-button-otb {
+				marvell,pins = "mpp35";
+				marvell,function = "gpio";
+			};
+			pmx_led_rebuild: pmx-led-rebuild {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+			pmx_led_health: pmx-led_health {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+			pmx_led_sata_brt_ctrl_1: pmx-led-sata-brt-ctrl-1 {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+			pmx_led_sata_brt_ctrl_2: pmx-led-sata-brt-ctrl-2 {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+			pmx_led_backup_brt_ctrl_1: pmx-led-backup-brt-ctrl-1 {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+			pmx_led_backup_brt_ctrl_2: pmx-led-backup-brt-ctrl-2 {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+			pmx_led_power_brt_ctrl_1: pmx-led-power-brt-ctrl-1 {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_led_power_brt_ctrl_2: pmx-led-power-brt-ctrl-2 {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_led_health_brt_ctrl_1: pmx-led-health-brt-ctrl-1 {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+			pmx_led_health_brt_ctrl_2: pmx-led-health-brt-ctrl-2 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+			pmx_led_rebuild_brt_ctrl_1: pmx-led-rebuild-brt-ctrl-1 {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+			pmx_led_rebuild_brt_ctrl_2: pmx-led-rebuild-brt-ctrl-2 {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+		};
 		i2c@11000 {
 			status = "okay";
 
diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
index 75bdb93..8db3123 100644
--- a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
+++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
@@ -1,6 +1,7 @@
 /dts-v1/;
 
 /include/ "kirkwood.dtsi"
+/include/ "kirkwood-98dx4122.dtsi"
 
 / {
 	model = "Keymile Kirkwood Reference Design";
@@ -16,6 +17,22 @@
 	};
 
 	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+
+			pinctrl-0 = < &pmx_nand &pmx_i2c_gpio_sda
+				&pmx_i2c_gpio_scl >;
+			pinctrl-names = "default";
+
+			pmx_i2c_gpio_sda: pmx-gpio-sda {
+				marvell,pins = "mpp8";
+				marvell,function = "gpio";
+			};
+			pmx_i2c_gpio_scl: pmx-gpio-scl {
+				marvell,pins = "mpp9";
+				marvell,function = "gpio";
+			};
+		};
+
 		serial@12000 {
 			clock-frequency = <200000000>;
 			status = "ok";
diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
index 798e60e..37d45c4 100644
--- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi
+++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi
@@ -1,4 +1,5 @@
 /include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
 
 / {
 	chosen {
@@ -6,6 +7,71 @@
 	};
 
 	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+
+			pinctrl-0 = < &pmx_power_hdd &pmx_usb_vbus
+				      &pmx_fan_low &pmx_fan_high
+				      &pmx_led_function_red &pmx_led_alarm
+				      &pmx_led_info &pmx_led_power
+				      &pmx_fan_lock &pmx_button_function
+				      &pmx_power_switch &pmx_power_auto_switch
+				      &pmx_led_function_blue >;
+			pinctrl-names = "default";
+
+			pmx_power_hdd: pmx-power-hdd {
+				marvell,pins = "mpp10";
+				marvell,function = "gpo";
+			};
+			pmx_usb_vbus: pmx-usb-vbus {
+				marvell,pins = "mpp11";
+				marvell,function = "gpio";
+			};
+			pmx_fan_high: pmx-fan-high {
+				marvell,pins = "mpp18";
+				marvell,function = "gpo";
+			};
+			pmx_fan_low: pmx-fan-low {
+				marvell,pins = "mpp19";
+				marvell,function = "gpo";
+			};
+			pmx_led_function_blue: pmx-led-function-blue {
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+			pmx_led_alarm: pmx-led-alarm {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+			pmx_led_info: pmx-led-info {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+			pmx_led_power: pmx-led-power {
+				marvell,pins = "mpp39";
+				marvell,function = "gpio";
+			};
+			pmx_fan_lock: pmx-fan-lock {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+			pmx_button_function: pmx-button-function {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+			pmx_power_switch: pmx-power-switch {
+				marvell,pins = "mpp42";
+				marvell,function = "gpio";
+			};
+			pmx_power_auto_switch: pmx-power-auto-switch {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_led_function_red: pmx-led-function_red {
+				marvell,pins = "mpp48";
+				marvell,function = "gpio";
+			};
+
+		};
 		sata@80000 {
 			status = "okay";
 			nr-ports = <1>;
@@ -105,4 +171,33 @@
 		                      5000 0>;
 		alarm-gpios = <&gpio1 8 0>;
 	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb_power: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 11 0>;
+		};
+		hdd_power: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "HDD Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 10 0>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts
index ac3c080..262c654 100644
--- a/arch/arm/boot/dts/kirkwood-mplcec4.dts
+++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts
@@ -1,6 +1,7 @@
 /dts-v1/;
 
 /include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
 
 / {
 	model = "MPL CEC4";
@@ -16,6 +17,64 @@
         };
 
 	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+
+			pinctrl-0 = < &pmx_nand &pmx_uart0
+				      &pmx_led_health &pmx_sdio
+				      &pmx_sata0 &pmx_sata1
+				      &pmx_led_user1o
+				      &pmx_led_user1g &pmx_led_user0o
+				      &pmx_led_user0g &pmx_led_misc
+				      &pmx_sdio_cd
+				    >;
+			pinctrl-names = "default";
+
+			pmx_led_health: pmx-led-health {
+				marvell,pins = "mpp7";
+				marvell,function = "gpo";
+			};
+
+			pmx_sata1: pmx-sata1 {
+				marvell,pins = "mpp34";
+				marvell,function = "sata1";
+			};
+
+			pmx_sata0: pmx-sata0 {
+				marvell,pins = "mpp35";
+				marvell,function = "sata0";
+			};
+
+			pmx_led_user1o: pmx-led-user1o {
+				marvell,pins = "mpp40";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_user1g: pmx-led-user1g {
+				marvell,pins = "mpp41";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_user0o: pmx-led-user0o {
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_user0g: pmx-led-user0g {
+				marvell,pins = "mpp45";
+				marvell,function = "gpio";
+			};
+
+			pmx_led_misc: pmx-led-misc {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+
+			pmx_sdio_cd: pmx-sdio-cd {
+				marvell,pins = "mpp47";
+				marvell,function = "gpio";
+			};
+		};
+
                 i2c@11000 {
                         status = "okay";
 
diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
index 9a2606c..49d3d74 100644
--- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
+++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
@@ -1,6 +1,7 @@
 /dts-v1/;
 
 /include/ "kirkwood.dtsi"
+/include/ "kirkwood-6282.dtsi"
 
 / {
 	model = "Plat'Home OpenBlocksA6";
@@ -29,11 +30,69 @@
 		nand@3000000 {
 			chip-delay = <25>;
 			status = "okay";
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x0 0x90000>;
+			};
+
+			partition@90000 {
+				label = "env";
+				reg = <0x90000 0x44000>;
+			};
+
+			partition@d4000 {
+				label = "test";
+				reg = <0xd4000 0x24000>;
+			};
+
+			partition@f4000 {
+				label = "conf";
+				reg = <0xf4000 0x400000>;
+			};
+
+			partition@4f4000 {
+				label = "linux";
+				reg = <0x4f4000 0x1d20000>;
+			};
+
+			partition@2214000 {
+				label = "user";
+				reg = <0x2214000 0x1dec000>;
+			};
 		};
 
 		sata@80000 {
 			nr-ports = <1>;
 			status = "okay";
 		};
+
+		i2c@11100 {
+			status = "okay";
+
+			s35390a: s35390a@30 {
+				compatible = "s35390a";
+				reg = <0x30>;
+			};
+		};
 	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-red {
+			label = "obsa6:red:stat";
+			gpios = <&gpio1 9 1>;
+		};
+
+		led-green {
+			label = "obsa6:green:stat";
+			gpios = <&gpio1 10 1>;
+		};
+
+		led-yellow {
+			label = "obsa6:yellow:stat";
+			gpios = <&gpio1 11 1>;
+		};
+        };
 };
diff --git a/arch/arm/boot/dts/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/kirkwood-ts219-6281.dts
index ccbf327..8295c83 100644
--- a/arch/arm/boot/dts/kirkwood-ts219-6281.dts
+++ b/arch/arm/boot/dts/kirkwood-ts219-6281.dts
@@ -1,8 +1,39 @@
 /dts-v1/;
 
 /include/ "kirkwood-ts219.dtsi"
+/include/ "kirkwood-6281.dtsi"
 
 / {
+	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+
+			pinctrl-0 = < &pmx_uart0 &pmx_uart1 &pmx_spi
+				      &pmx_twsi0 &pmx_sata0 &pmx_sata1
+				      &pmx_ram_size &pmx_reset_button
+				      &pmx_USB_copy_button &pmx_board_id>;
+			pinctrl-names = "default";
+
+			pmx_ram_size: pmx-ram-size {
+				/* RAM: 0: 256 MB, 1: 512 MB */
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+			pmx_USB_copy_button: pmx-USB-copy-button {
+				marvell,pins = "mpp15";
+				marvell,function = "gpio";
+			};
+			pmx_reset_button: pmx-reset-button {
+				marvell,pins = "mpp16";
+				marvell,function = "gpio";
+			};
+			pmx_board_id: pmx-board-id {
+				/* 0: TS-11x, 1: TS-21x */
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+		};
+	};
+
 	gpio_keys {
 		compatible = "gpio-keys";
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/kirkwood-ts219-6282.dts
index fbe9932..df3f95d 100644
--- a/arch/arm/boot/dts/kirkwood-ts219-6282.dts
+++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts
@@ -1,8 +1,39 @@
 /dts-v1/;
 
 /include/ "kirkwood-ts219.dtsi"
+/include/ "kirkwood-6282.dtsi"
 
 / {
+	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+
+			pinctrl-0 = < &pmx_uart0 &pmx_uart1 &pmx_spi
+				      &pmx_twsi0 &pmx_sata0 &pmx_sata1
+				      &pmx_ram_size &pmx_reset_button
+				      &pmx_USB_copy_button &pmx_board_id>;
+			pinctrl-names = "default";
+
+			pmx_ram_size: pmx-ram-size {
+				/* RAM: 0: 256 MB, 1: 512 MB */
+				marvell,pins = "mpp36";
+				marvell,function = "gpio";
+			};
+			pmx_reset_button: pmx-reset-button {
+				marvell,pins = "mpp37";
+				marvell,function = "gpio";
+			};
+			pmx_USB_copy_button: pmx-USB-copy-button {
+				marvell,pins = "mpp43";
+				marvell,function = "gpio";
+			};
+			pmx_board_id: pmx-board-id {
+				/* 0: TS-11x, 1: TS-21x */
+				marvell,pins = "mpp44";
+				marvell,function = "gpio";
+			};
+		};
+	};
+
 	gpio_keys {
 		compatible = "gpio-keys";
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index 4e5b815..a990c30 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -4,6 +4,10 @@
 	compatible = "marvell,kirkwood";
 	interrupt-parent = <&intc>;
 
+	aliases {
+	       gpio0 = &gpio0;
+	       gpio1 = &gpio1;
+	};
 	intc: interrupt-controller {
 		compatible = "marvell,orion-intc", "marvell,intc";
 		interrupt-controller;
@@ -24,7 +28,8 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 			reg = <0x10100 0x40>;
-			ngpio = <32>;
+			ngpios = <32>;
+			interrupt-controller;
 			interrupts = <35>, <36>, <37>, <38>;
 		};
 
@@ -33,7 +38,8 @@
 			#gpio-cells = <2>;
 			gpio-controller;
 			reg = <0x10140 0x40>;
-			ngpio = <18>;
+			ngpios = <18>;
+			interrupt-controller;
 			interrupts = <39>, <40>, <41>;
 		};
 
@@ -77,6 +83,13 @@
 			status = "okay";
 		};
 
+		ehci@50000 {
+			compatible = "marvell,orion-ehci";
+			reg = <0x50000 0x1000>;
+			interrupts = <19>;
+			status = "okay";
+		};
+
 		sata@80000 {
 			compatible = "marvell,orion-sata";
 			reg = <0x80000 0x5000>;
diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi
index e5ffe96..1582f48 100644
--- a/arch/arm/boot/dts/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/lpc32xx.dtsi
@@ -182,6 +182,13 @@
 				pnx,timeout = <0x64>;
 			};
 
+			mpwm: mpwm@400E8000 {
+				compatible = "nxp,lpc3220-motor-pwm";
+				reg = <0x400E8000 0x78>;
+				status = "disabled";
+				#pwm-cells = <2>;
+			};
+
 			i2cusb: i2c@31020300 {
 				compatible = "nxp,pnx-i2c";
 				reg = <0x31020300 0x100>;
diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts
index c6f85f0..27f31a5 100644
--- a/arch/arm/boot/dts/snowball.dts
+++ b/arch/arm/boot/dts/snowball.dts
@@ -14,7 +14,7 @@
 
 / {
 	model = "Calao Systems Snowball platform with device tree";
-	compatible = "calaosystems,snowball-a9500";
+	compatible = "calaosystems,snowball-a9500", "st-ericsson,u9500";
 
 	memory {
 		reg = <0x00000000 0x20000000>;
@@ -147,10 +147,10 @@
 		};
 
 		// External Micro SD slot
-		sdi@80126000 {
+		sdi0_per1@80126000 {
 			arm,primecell-periphid = <0x10480180>;
 			max-frequency = <50000000>;
-			bus-width = <8>;
+			bus-width = <4>;
 			mmc-cap-mmc-highspeed;
 			vmmc-supply = <&ab8500_ldo_aux3_reg>;
 
@@ -161,7 +161,7 @@
 		};
 
 		// On-board eMMC
-		sdi@80114000 {
+		sdi4_per2@80114000 {
 			arm,primecell-periphid = <0x10480180>;
 		        max-frequency = <50000000>;
 			bus-width = <8>;
@@ -214,5 +214,137 @@
 		cpufreq-cooling {
 			status = "okay";
 		};
+
+		prcmu@80157000 {
+			db8500-prcmu-regulators {
+				db8500_vape_reg: db8500_vape {
+					regulator-name = "db8500-vape";
+				};
+
+				db8500_varm_reg: db8500_varm {
+					regulator-name = "db8500-varm";
+				};
+
+				db8500_vmodem_reg: db8500_vmodem {
+					regulator-name = "db8500-vmodem";
+				};
+
+				db8500_vpll_reg: db8500_vpll {
+					regulator-name = "db8500-vpll";
+				};
+
+				db8500_vsmps1_reg: db8500_vsmps1 {
+					regulator-name = "db8500-vsmps1";
+				};
+
+				db8500_vsmps2_reg: db8500_vsmps2 {
+					regulator-name = "db8500-vsmps2";
+				};
+
+				db8500_vsmps3_reg: db8500_vsmps3 {
+					regulator-name = "db8500-vsmps3";
+				};
+
+				db8500_vrf1_reg: db8500_vrf1 {
+					regulator-name = "db8500-vrf1";
+				};
+
+				db8500_sva_mmdsp_reg: db8500_sva_mmdsp {
+					regulator-name = "db8500-sva-mmdsp";
+				};
+
+				db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret {
+					regulator-name = "db8500-sva-mmdsp-ret";
+				};
+
+				db8500_sva_pipe_reg: db8500_sva_pipe {
+					regulator-name = "db8500_sva_pipe";
+				};
+
+				db8500_sia_mmdsp_reg: db8500_sia_mmdsp {
+					regulator-name = "db8500_sia_mmdsp";
+				};
+
+				db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret {
+					regulator-name = "db8500-sia-mmdsp-ret";
+				};
+
+				db8500_sia_pipe_reg: db8500_sia_pipe {
+					regulator-name = "db8500-sia-pipe";
+				};
+
+				db8500_sga_reg: db8500_sga {
+					regulator-name = "db8500-sga";
+				};
+
+				db8500_b2r2_mcde_reg: db8500_b2r2_mcde {
+					regulator-name = "db8500-b2r2-mcde";
+				};
+
+				db8500_esram12_reg: db8500_esram12 {
+					regulator-name = "db8500-esram12";
+				};
+
+				db8500_esram12_ret_reg: db8500_esram12_ret {
+					regulator-name = "db8500-esram12-ret";
+				};
+
+				db8500_esram34_reg: db8500_esram34 {
+					regulator-name = "db8500-esram34";
+				};
+
+				db8500_esram34_ret_reg: db8500_esram34_ret {
+					regulator-name = "db8500-esram34-ret";
+				};
+			};
+
+			ab8500@5 {
+				ab8500-regulators {
+					ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
+						regulator-name = "V-DISPLAY";
+					};
+
+					ab8500_ldo_aux2_reg: ab8500_ldo_aux2 {
+						regulator-name = "V-eMMC1";
+					};
+
+					ab8500_ldo_aux3_reg: ab8500_ldo_aux3 {
+						regulator-name = "V-MMC-SD";
+					};
+
+					ab8500_ldo_initcore_reg: ab8500_ldo_initcore {
+						regulator-name = "V-INTCORE";
+					};
+
+					ab8500_ldo_tvout_reg: ab8500_ldo_tvout {
+						regulator-name = "V-TVOUT";
+					};
+
+					ab8500_ldo_usb_reg: ab8500_ldo_usb {
+						regulator-name = "dummy";
+					};
+
+					ab8500_ldo_audio_reg: ab8500_ldo_audio {
+						regulator-name = "V-AUD";
+					};
+
+					ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 {
+						regulator-name = "V-AMIC1";
+					};
+
+					ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 {
+						regulator-name = "V-AMIC2";
+					};
+
+					ab8500_ldo_dmic_reg: ab8500_ldo_dmic {
+						regulator-name = "V-DMIC";
+					};
+
+					ab8500_ldo_ana_reg: ab8500_ldo_ana {
+						regulator-name = "V-CSI/DSI";
+					};
+				};
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/stuib.dtsi b/arch/arm/boot/dts/stuib.dtsi
new file mode 100644
index 0000000..39446a2
--- /dev/null
+++ b/arch/arm/boot/dts/stuib.dtsi
@@ -0,0 +1,78 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+	soc-u9500 {
+		i2c@80004000 {
+			stmpe1601: stmpe1601@40 {
+				compatible = "st,stmpe1601";
+				reg = <0x40>;
+				interrupts = <26 0x1>;
+				interrupt-parent = <&gpio6>;
+				interrupt-controller;
+
+				wakeup-source;
+				st,autosleep-timeout = <1024>;
+
+				stmpe_keypad {
+					compatible = "st,stmpe-keypad";
+
+					debounce-interval = <64>;
+					st,scan-count = <8>;
+					st,no-autorepeat;
+
+					linux,keymap = <0x205006b
+							0x4010074
+							0x3050072
+							0x1030004
+							0x502006a
+							0x500000a
+							0x5008b
+							0x706001c
+							0x405000b
+							0x6070003
+							0x3040067
+							0x303006c
+							0x60400e7
+							0x602009e
+							0x4020073
+							0x5050002
+							0x4030069
+							0x3020008>;
+				};
+			};
+		};
+
+		i2c@80110000 {
+			bu21013_tp@0x5c {
+				compatible = "rhom,bu21013_tp";
+				reg = <0x5c>;
+				touch-gpio = <&gpio2 20 0x4>;
+				avdd-supply = <&ab8500_ldo_aux1_reg>;
+
+				rhom,touch-max-x = <384>;
+				rhom,touch-max-y = <704>;
+				rhom,flip-y;
+			};
+
+			bu21013_tp@0x5d {
+				compatible = "rhom,bu21013_tp";
+				reg = <0x5d>;
+				touch-gpio = <&gpio2 20 0x4>;
+				avdd-supply = <&ab8500_ldo_aux1_reg>;
+
+				rhom,touch-max-x = <384>;
+				rhom,touch-max-y = <704>;
+				rhom,flip-y;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts
index 74b8a47..43eb72a 100644
--- a/arch/arm/boot/dts/tegra20-harmony.dts
+++ b/arch/arm/boot/dts/tegra20-harmony.dts
@@ -10,6 +10,18 @@
 		reg = <0x00000000 0x40000000>;
 	};
 
+	host1x {
+		hdmi {
+			status = "okay";
+
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */
+		};
+	};
+
 	pinmux {
 		pinctrl-names = "default";
 		pinctrl-0 = <&state_default>;
@@ -262,9 +274,9 @@
 		};
 	};
 
-	i2c@7000c400 {
+	hdmi_ddc: i2c@7000c400 {
 		status = "okay";
-		clock-frequency = <400000>;
+		clock-frequency = <100000>;
 	};
 
 	i2c@7000c500 {
@@ -369,13 +381,13 @@
 					regulator-max-microvolt = <1800000>;
 				};
 
-				ldo7 {
+				hdmi_vdd_reg: ldo7 {
 					regulator-name = "vdd_ldo7,avdd_hdmi";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
 				};
 
-				ldo8 {
+				hdmi_pll_reg: ldo8 {
 					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
@@ -396,6 +408,11 @@
 				};
 			};
 		};
+
+		temperature-sensor@4c {
+			compatible = "adi,adt7461";
+			reg = <0x4c>;
+		};
 	};
 
 	pmc {
diff --git a/arch/arm/boot/dts/tegra20-plutux.dts b/arch/arm/boot/dts/tegra20-plutux.dts
index 331a3ef..2894800 100644
--- a/arch/arm/boot/dts/tegra20-plutux.dts
+++ b/arch/arm/boot/dts/tegra20-plutux.dts
@@ -6,6 +6,12 @@
 	model = "Avionic Design Plutux board";
 	compatible = "ad,plutux", "ad,tamonten", "nvidia,tegra20";
 
+	host1x {
+		hdmi {
+			status = "okay";
+		};
+	};
+
 	i2c@7000c000 {
 		wm8903: wm8903@1a {
 			compatible = "wlf,wm8903";
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index e58a0e6..4204598 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -561,6 +561,12 @@
 		status = "okay";
 	};
 
+	sdhci@c8000000 {
+		status = "okay";
+		power-gpios = <&gpio 86 0>; /* gpio PK6 */
+		bus-width = <4>;
+	};
+
 	sdhci@c8000400 {
 		status = "okay";
 		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi
index 5b3d8b1..a239ccd 100644
--- a/arch/arm/boot/dts/tegra20-tamonten.dtsi
+++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi
@@ -8,6 +8,16 @@
 		reg = <0x00000000 0x20000000>;
 	};
 
+	host1x {
+		hdmi {
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */
+		};
+	};
+
 	pinmux {
 		pinctrl-names = "default";
 		pinctrl-0 = <&state_default>;
@@ -62,10 +72,6 @@
 				nvidia,pins = "dap4";
 				nvidia,function = "dap4";
 			};
-			ddc {
-				nvidia,pins = "ddc";
-				nvidia,function = "i2c2";
-			};
 			dta {
 				nvidia,pins = "dta", "dtd";
 				nvidia,function = "sdio2";
@@ -91,7 +97,7 @@
 				nvidia,function = "pcie";
 			};
 			hdint {
-				nvidia,pins = "hdint", "pta";
+				nvidia,pins = "hdint";
 				nvidia,function = "hdmi";
 			};
 			i2cp {
@@ -230,6 +236,39 @@
 				nvidia,pull = <1>;
 			};
 		};
+
+		state_i2cmux_ddc: pinmux_i2cmux_ddc {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+
+		state_i2cmux_pta: pinmux_i2cmux_pta {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "i2c2";
+			};
+		};
+
+		state_i2cmux_idle: pinmux_i2cmux_idle {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
 	};
 
 	i2s@70002800 {
@@ -246,6 +285,36 @@
 		status = "okay";
 	};
 
+	i2c@7000c400 {
+		clock-frequency = <100000>;
+		status = "okay";
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&{/i2c@7000c400}>;
+
+		pinctrl-names = "ddc", "pta", "idle";
+		pinctrl-0 = <&state_i2cmux_ddc>;
+		pinctrl-1 = <&state_i2cmux_pta>;
+		pinctrl-2 = <&state_i2cmux_idle>;
+
+		hdmi_ddc: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
 	i2c@7000d000 {
 		clock-frequency = <400000>;
 		status = "okay";
@@ -348,13 +417,13 @@
 					regulator-max-microvolt = <2850000>;
 				};
 
-				ldo7 {
+				hdmi_vdd_reg: ldo7 {
 					regulator-name = "vdd_ldo7,avdd_hdmi";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
 				};
 
-				ldo8 {
+				hdmi_pll_reg: ldo8 {
 					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
@@ -381,6 +450,11 @@
 				};
 			};
 		};
+
+		temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+		};
 	};
 
 	pmc {
diff --git a/arch/arm/boot/dts/tegra20-tec.dts b/arch/arm/boot/dts/tegra20-tec.dts
index 9aff31b..402b210 100644
--- a/arch/arm/boot/dts/tegra20-tec.dts
+++ b/arch/arm/boot/dts/tegra20-tec.dts
@@ -6,10 +6,13 @@
 	model = "Avionic Design Tamonten Evaluation Carrier";
 	compatible = "ad,tec", "ad,tamonten", "nvidia,tegra20";
 
-	i2c@7000c000 {
-		clock-frequency = <400000>;
-		status = "okay";
+	host1x {
+		hdmi {
+			status = "okay";
+		};
+	};
 
+	i2c@7000c000 {
 		wm8903: wm8903@1a {
 			compatible = "wlf,wm8903";
 			reg = <0x1a>;
diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts
index 27fb8a6..b70b4cb 100644
--- a/arch/arm/boot/dts/tegra20-trimslice.dts
+++ b/arch/arm/boot/dts/tegra20-trimslice.dts
@@ -10,6 +10,18 @@
 		reg = <0x00000000 0x40000000>;
 	};
 
+	host1x {
+		hdmi {
+			status = "okay";
+
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */
+		};
+	};
+
 	pinmux {
 		pinctrl-names = "default";
 		pinctrl-0 = <&state_default>;
@@ -249,14 +261,24 @@
 		clock-frequency = <216000000>;
 	};
 
-	i2c@7000c000 {
+	dvi_ddc: i2c@7000c000 {
 		status = "okay";
-		clock-frequency = <400000>;
+		clock-frequency = <100000>;
 	};
 
-	i2c@7000c400 {
+	spi@7000c380 {
 		status = "okay";
-		clock-frequency = <400000>;
+		spi-max-frequency = <48000000>;
+		spi-flash@0 {
+			compatible = "winbond,w25q80bl";
+			reg = <0>;
+			spi-max-frequency = <48000000>;
+		};
+	};
+
+	hdmi_ddc: i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
 	};
 
 	i2c@7000c500 {
@@ -300,6 +322,30 @@
 		bus-width = <4>;
 	};
 
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hdmi_vdd_reg: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "avdd_hdmi";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		hdmi_pll_reg: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "avdd_hdmi_pll";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+	};
+
 	sound {
 		compatible = "nvidia,tegra-audio-trimslice";
 		nvidia,i2s-controller = <&tegra_i2s1>;
diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
index 86854f1..adc4754 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -64,11 +64,6 @@
 				nvidia,pins = "dap4";
 				nvidia,function = "dap4";
 			};
-			ddc {
-				nvidia,pins = "ddc", "owc", "spdi", "spdo",
-					"uac";
-				nvidia,function = "rsvd2";
-			};
 			dta {
 				nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
 				nvidia,function = "vi";
@@ -98,7 +93,7 @@
 				nvidia,function = "pcie";
 			};
 			hdint {
-				nvidia,pins = "hdint", "pta";
+				nvidia,pins = "hdint";
 				nvidia,function = "hdmi";
 			};
 			i2cp {
@@ -129,6 +124,10 @@
 					"lspi", "lvp1", "lvs";
 				nvidia,function = "displaya";
 			};
+			owc {
+				nvidia,pins = "owc", "spdi", "spdo", "uac";
+				nvidia,function = "rsvd2";
+			};
 			pmc {
 				nvidia,pins = "pmc";
 				nvidia,function = "pwr_on";
@@ -237,6 +236,49 @@
 					"ld23_22";
 				nvidia,pull = <1>;
 			};
+			drive_sdio1 {
+				nvidia,pins = "drive_sdio1";
+				nvidia,high-speed-mode = <0>;
+				nvidia,schmitt = <1>;
+				nvidia,low-power-mode = <3>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <3>;
+				nvidia,slew-rate-falling = <3>;
+			};
+		};
+
+		state_i2cmux_ddc: pinmux_i2cmux_ddc {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+
+		state_i2cmux_pta: pinmux_i2cmux_pta {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "i2c2";
+			};
+		};
+
+		state_i2cmux_idle: pinmux_i2cmux_idle {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
 		};
 	};
 
@@ -281,6 +323,31 @@
 		clock-frequency = <400000>;
 	};
 
+	i2cmux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&{/i2c@7000c400}>;
+
+		pinctrl-names = "ddc", "pta", "idle";
+		pinctrl-0 = <&state_i2cmux_ddc>;
+		pinctrl-1 = <&state_i2cmux_pta>;
+		pinctrl-2 = <&state_i2cmux_idle>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
 	i2c@7000c500 {
 		status = "okay";
 		clock-frequency = <400000>;
@@ -406,6 +473,11 @@
 				};
 			};
 		};
+
+		temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+		};
 	};
 
 	pmc {
@@ -425,6 +497,12 @@
 		status = "okay";
 	};
 
+	sdhci@c8000000 {
+		status = "okay";
+		power-gpios = <&gpio 86 0>; /* gpio PK6 */
+		bus-width = <4>;
+	};
+
 	sdhci@c8000400 {
 		status = "okay";
 		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts
index 94a71c9..20d576e 100644
--- a/arch/arm/boot/dts/tegra20-whistler.dts
+++ b/arch/arm/boot/dts/tegra20-whistler.dts
@@ -10,6 +10,18 @@
 		reg = <0x00000000 0x20000000>;
 	};
 
+	host1x {
+		hdmi {
+			status = "okay";
+
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */
+		};
+	};
+
 	pinmux {
 		pinctrl-names = "default";
 		pinctrl-0 = <&state_default>;
@@ -246,6 +258,11 @@
 		clock-frequency = <216000000>;
 	};
 
+	hdmi_ddc: i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
 	i2c@7000d000 {
 		status = "okay";
 		clock-frequency = <100000>;
@@ -356,7 +373,7 @@
 					regulator-always-on;
 				};
 
-				ldo6 {
+				hdmi_pll_reg: ldo6 {
 					regulator-name = "nvvdd_ldo6,avdd_hdmi_pll";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
@@ -388,7 +405,7 @@
 					regulator-always-on;
 				};
 
-				ldo11 {
+				hdmi_vdd_reg: ldo11 {
 					regulator-name = "nvvdd_ldo11,vddio_pex_clk,vcom_33,avdd_hdmi";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index f40cfba..fba998e 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -4,6 +4,93 @@
 	compatible = "nvidia,tegra20";
 	interrupt-parent = <&intc>;
 
+	host1x {
+		compatible = "nvidia,tegra20-host1x", "simple-bus";
+		reg = <0x50000000 0x00024000>;
+		interrupts = <0 65 0x04   /* mpcore syncpt */
+			      0 67 0x04>; /* mpcore general */
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ranges = <0x54000000 0x54000000 0x04000000>;
+
+		mpe {
+			compatible = "nvidia,tegra20-mpe";
+			reg = <0x54040000 0x00040000>;
+			interrupts = <0 68 0x04>;
+		};
+
+		vi {
+			compatible = "nvidia,tegra20-vi";
+			reg = <0x54080000 0x00040000>;
+			interrupts = <0 69 0x04>;
+		};
+
+		epp {
+			compatible = "nvidia,tegra20-epp";
+			reg = <0x540c0000 0x00040000>;
+			interrupts = <0 70 0x04>;
+		};
+
+		isp {
+			compatible = "nvidia,tegra20-isp";
+			reg = <0x54100000 0x00040000>;
+			interrupts = <0 71 0x04>;
+		};
+
+		gr2d {
+			compatible = "nvidia,tegra20-gr2d";
+			reg = <0x54140000 0x00040000>;
+			interrupts = <0 72 0x04>;
+		};
+
+		gr3d {
+			compatible = "nvidia,tegra20-gr3d";
+			reg = <0x54180000 0x00040000>;
+		};
+
+		dc@54200000 {
+			compatible = "nvidia,tegra20-dc";
+			reg = <0x54200000 0x00040000>;
+			interrupts = <0 73 0x04>;
+
+			rgb {
+				status = "disabled";
+			};
+		};
+
+		dc@54240000 {
+			compatible = "nvidia,tegra20-dc";
+			reg = <0x54240000 0x00040000>;
+			interrupts = <0 74 0x04>;
+
+			rgb {
+				status = "disabled";
+			};
+		};
+
+		hdmi {
+			compatible = "nvidia,tegra20-hdmi";
+			reg = <0x54280000 0x00040000>;
+			interrupts = <0 75 0x04>;
+			status = "disabled";
+		};
+
+		tvo {
+			compatible = "nvidia,tegra20-tvo";
+			reg = <0x542c0000 0x00040000>;
+			interrupts = <0 76 0x04>;
+			status = "disabled";
+		};
+
+		dsi {
+			compatible = "nvidia,tegra20-dsi";
+			reg = <0x54300000 0x00040000>;
+			status = "disabled";
+		};
+	};
+
 	cache-controller@50043000 {
 		compatible = "arm,pl310-cache";
 		reg = <0x50043000 0x1000>;
@@ -147,6 +234,16 @@
 		status = "disabled";
 	};
 
+	spi@7000c380 {
+		compatible = "nvidia,tegra20-sflash";
+		reg = <0x7000c380 0x80>;
+		interrupts = <0 39 0x04>;
+		nvidia,dma-request-selector = <&apbdma 11>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
 	i2c@7000c400 {
 		compatible = "nvidia,tegra20-i2c";
 		reg = <0x7000c400 0x100>;
@@ -174,6 +271,46 @@
 		status = "disabled";
 	};
 
+	spi@7000d400 {
+		compatible = "nvidia,tegra20-slink";
+		reg = <0x7000d400 0x200>;
+		interrupts = <0 59 0x04>;
+		nvidia,dma-request-selector = <&apbdma 15>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi@7000d600 {
+		compatible = "nvidia,tegra20-slink";
+		reg = <0x7000d600 0x200>;
+		interrupts = <0 82 0x04>;
+		nvidia,dma-request-selector = <&apbdma 16>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi@7000d800 {
+		compatible = "nvidia,tegra20-slink";
+		reg = <0x7000d480 0x200>;
+		interrupts = <0 83 0x04>;
+		nvidia,dma-request-selector = <&apbdma 17>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi@7000da00 {
+		compatible = "nvidia,tegra20-slink";
+		reg = <0x7000da00 0x200>;
+		interrupts = <0 93 0x04>;
+		nvidia,dma-request-selector = <&apbdma 18>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
 	pmc {
 		compatible = "nvidia,tegra20-pmc";
 		reg = <0x7000e400 0x400>;
diff --git a/arch/arm/boot/dts/tegra30-cardhu-a02.dts b/arch/arm/boot/dts/tegra30-cardhu-a02.dts
index dd4222f..adc88aa 100644
--- a/arch/arm/boot/dts/tegra30-cardhu-a02.dts
+++ b/arch/arm/boot/dts/tegra30-cardhu-a02.dts
@@ -83,5 +83,11 @@
 			gpio = <&gpio 83 0>; /* GPIO PK3 */
 		};
 	};
+
+	sdhci@78000400 {
+		status = "okay";
+		power-gpios = <&gpio 28 0>; /* gpio PD4 */
+		bus-width = <4>;
+	};
 };
 
diff --git a/arch/arm/boot/dts/tegra30-cardhu-a04.dts b/arch/arm/boot/dts/tegra30-cardhu-a04.dts
index 0828f09..08163e1 100644
--- a/arch/arm/boot/dts/tegra30-cardhu-a04.dts
+++ b/arch/arm/boot/dts/tegra30-cardhu-a04.dts
@@ -95,4 +95,10 @@
 			gpio = <&gpio 232 0>; /* GPIO PDD0 */
 		};
 	};
+
+	sdhci@78000400 {
+		status = "okay";
+		power-gpios = <&gpio 27 0>; /* gpio PD3 */
+		bus-width = <4>;
+	};
 };
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index b1271a8..bdb2a66 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -52,6 +52,22 @@
 				nvidia,pull = <2>;
 				nvidia,tristate = <0>;
 			};
+			sdmmc3_clk_pa6 {
+				nvidia,pins = "sdmmc3_clk_pa6";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <0>;
+				nvidia,tristate = <0>;
+			};
+			sdmmc3_cmd_pa7 {
+				nvidia,pins =	"sdmmc3_cmd_pa7",
+						"sdmmc3_dat0_pb7",
+						"sdmmc3_dat1_pb6",
+						"sdmmc3_dat2_pb5",
+						"sdmmc3_dat3_pb4";
+				nvidia,function = "sdmmc3";
+				nvidia,pull = <2>;
+				nvidia,tristate = <0>;
+			};
 			sdmmc4_clk_pcc4 {
 				nvidia,pins =	"sdmmc4_clk_pcc4",
 						"sdmmc4_rst_n_pcc3";
@@ -81,6 +97,15 @@
 				nvidia,pull = <0>;
 				nvidia,tristate = <0>;
 			};
+			sdio3 {
+				nvidia,pins = "drive_sdio3";
+				nvidia,high-speed-mode = <0>;
+				nvidia,schmitt = <0>;
+				nvidia,pull-down-strength = <46>;
+				nvidia,pull-up-strength = <42>;
+				nvidia,slew-rate-rising = <1>;
+				nvidia,slew-rate-falling = <1>;
+			};
 		};
 	};
 
@@ -250,6 +275,16 @@
 		};
 	};
 
+	spi@7000da00 {
+		status = "okay";
+		spi-max-frequency = <25000000>;
+		spi-flash@1 {
+			compatible = "winbond,w25q32";
+			reg = <1>;
+			spi-max-frequency = <20000000>;
+		};
+	};
+
 	ahub {
 		i2s@70080400 {
 			status = "okay";
@@ -384,6 +419,8 @@
 			regulator-name = "vdd_com";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+			regulator-boot-on;
 			enable-active-high;
 			gpio = <&gpio 24 0>; /* gpio PD0 */
 			vin-supply = <&sys_3v3_reg>;
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index fed8dca..efa603d 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -4,6 +4,93 @@
 	compatible = "nvidia,tegra30";
 	interrupt-parent = <&intc>;
 
+	host1x {
+		compatible = "nvidia,tegra30-host1x", "simple-bus";
+		reg = <0x50000000 0x00024000>;
+		interrupts = <0 65 0x04   /* mpcore syncpt */
+			      0 67 0x04>; /* mpcore general */
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ranges = <0x54000000 0x54000000 0x04000000>;
+
+		mpe {
+			compatible = "nvidia,tegra30-mpe";
+			reg = <0x54040000 0x00040000>;
+			interrupts = <0 68 0x04>;
+		};
+
+		vi {
+			compatible = "nvidia,tegra30-vi";
+			reg = <0x54080000 0x00040000>;
+			interrupts = <0 69 0x04>;
+		};
+
+		epp {
+			compatible = "nvidia,tegra30-epp";
+			reg = <0x540c0000 0x00040000>;
+			interrupts = <0 70 0x04>;
+		};
+
+		isp {
+			compatible = "nvidia,tegra30-isp";
+			reg = <0x54100000 0x00040000>;
+			interrupts = <0 71 0x04>;
+		};
+
+		gr2d {
+			compatible = "nvidia,tegra30-gr2d";
+			reg = <0x54140000 0x00040000>;
+			interrupts = <0 72 0x04>;
+		};
+
+		gr3d {
+			compatible = "nvidia,tegra30-gr3d";
+			reg = <0x54180000 0x00040000>;
+		};
+
+		dc@54200000 {
+			compatible = "nvidia,tegra30-dc";
+			reg = <0x54200000 0x00040000>;
+			interrupts = <0 73 0x04>;
+
+			rgb {
+				status = "disabled";
+			};
+		};
+
+		dc@54240000 {
+			compatible = "nvidia,tegra30-dc";
+			reg = <0x54240000 0x00040000>;
+			interrupts = <0 74 0x04>;
+
+			rgb {
+				status = "disabled";
+			};
+		};
+
+		hdmi {
+			compatible = "nvidia,tegra30-hdmi";
+			reg = <0x54280000 0x00040000>;
+			interrupts = <0 75 0x04>;
+			status = "disabled";
+		};
+
+		tvo {
+			compatible = "nvidia,tegra30-tvo";
+			reg = <0x542c0000 0x00040000>;
+			interrupts = <0 76 0x04>;
+			status = "disabled";
+		};
+
+		dsi {
+			compatible = "nvidia,tegra30-dsi";
+			reg = <0x54300000 0x00040000>;
+			status = "disabled";
+		};
+	};
+
 	cache-controller@50043000 {
 		compatible = "arm,pl310-cache";
 		reg = <0x50043000 0x1000>;
@@ -177,6 +264,66 @@
 		status = "disabled";
 	};
 
+	spi@7000d400 {
+		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		reg = <0x7000d400 0x200>;
+		interrupts = <0 59 0x04>;
+		nvidia,dma-request-selector = <&apbdma 15>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi@7000d600 {
+		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		reg = <0x7000d600 0x200>;
+		interrupts = <0 82 0x04>;
+		nvidia,dma-request-selector = <&apbdma 16>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi@7000d800 {
+		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		reg = <0x7000d480 0x200>;
+		interrupts = <0 83 0x04>;
+		nvidia,dma-request-selector = <&apbdma 17>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi@7000da00 {
+		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		reg = <0x7000da00 0x200>;
+		interrupts = <0 93 0x04>;
+		nvidia,dma-request-selector = <&apbdma 18>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi@7000dc00 {
+		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		reg = <0x7000dc00 0x200>;
+		interrupts = <0 94 0x04>;
+		nvidia,dma-request-selector = <&apbdma 27>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	spi@7000de00 {
+		compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
+		reg = <0x7000de00 0x200>;
+		interrupts = <0 79 0x04>;
+		nvidia,dma-request-selector = <&apbdma 28>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
 	pmc {
 		compatible = "nvidia,tegra20-pmc", "nvidia,tegra30-pmc";
 		reg = <0x7000e400 0x400>;
diff --git a/arch/arm/boot/dts/u9540.dts b/arch/arm/boot/dts/u9540.dts
new file mode 100644
index 0000000..95892ec
--- /dev/null
+++ b/arch/arm/boot/dts/u9540.dts
@@ -0,0 +1,72 @@
+/*
+ * Copyright 2012 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "dbx5x0.dtsi"
+
+/ {
+	model = "ST-Ericsson U9540 platform with Device Tree";
+	compatible = "st-ericsson,u9540";
+
+	memory {
+		reg = <0x00000000 0x20000000>;
+	};
+
+	soc-u9500 {
+		uart@80120000 {
+			status = "okay";
+		};
+
+		uart@80121000 {
+			status = "okay";
+		};
+
+		uart@80007000 {
+			status = "okay";
+		};
+
+		// External Micro SD slot
+		sdi0_per1@80126000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <100000000>;
+			bus-width = <4>;
+			mmc-cap-sd-highspeed;
+			mmc-cap-mmc-highspeed;
+			vmmc-supply = <&ab8500_ldo_aux3_reg>;
+
+			cd-gpios  = <&gpio7 6 0x4>; // 230
+			cd-inverted;
+
+			status = "okay";
+		};
+
+
+		// WLAN SDIO channel
+		sdi1_per2@80118000 {
+			arm,primecell-periphid = <0x10480180>;
+			max-frequency = <50000000>;
+			bus-width = <4>;
+
+			status = "okay";
+		};
+
+		// On-board eMMC
+		sdi4_per2@80114000 {
+			arm,primecell-periphid = <0x10480180>;
+		        max-frequency = <100000000>;
+			bus-width = <8>;
+			mmc-cap-mmc-highspeed;
+			vmmc-supply = <&ab8500_ldo_aux2_reg>;
+
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
new file mode 100644
index 0000000..401c126
--- /dev/null
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -0,0 +1,166 @@
+/*
+ *  Copyright (C) 2011 Xilinx
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+/include/ "skeleton.dtsi"
+
+/ {
+	compatible = "xlnx,zynq-7000";
+
+	amba {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		interrupt-parent = <&intc>;
+		ranges;
+
+		intc: interrupt-controller@f8f01000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			interrupt-controller;
+			reg = <0xF8F01000 0x1000>,
+			      <0xF8F00100 0x100>;
+		};
+
+		L2: cache-controller {
+			compatible = "arm,pl310-cache";
+			reg = <0xF8F02000 0x1000>;
+			arm,data-latency = <2 3 2>;
+			arm,tag-latency = <2 3 2>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		uart0: uart@e0000000 {
+			compatible = "xlnx,xuartps";
+			reg = <0xE0000000 0x1000>;
+			interrupts = <0 27 4>;
+			clock = <50000000>;
+		};
+
+		uart1: uart@e0001000 {
+			compatible = "xlnx,xuartps";
+			reg = <0xE0001000 0x1000>;
+			interrupts = <0 50 4>;
+			clock = <50000000>;
+		};
+
+		slcr: slcr@f8000000 {
+			compatible = "xlnx,zynq-slcr";
+			reg = <0xF8000000 0x1000>;
+
+			clocks {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ps_clk: ps_clk {
+					#clock-cells = <0>;
+					compatible = "fixed-clock";
+					/* clock-frequency set in board-specific file */
+					clock-output-names = "ps_clk";
+				};
+				armpll: armpll {
+					#clock-cells = <0>;
+					compatible = "xlnx,zynq-pll";
+					clocks = <&ps_clk>;
+					reg = <0x100 0x110>;
+					clock-output-names = "armpll";
+				};
+				ddrpll: ddrpll {
+					#clock-cells = <0>;
+					compatible = "xlnx,zynq-pll";
+					clocks = <&ps_clk>;
+					reg = <0x104 0x114>;
+					clock-output-names = "ddrpll";
+				};
+				iopll: iopll {
+					#clock-cells = <0>;
+					compatible = "xlnx,zynq-pll";
+					clocks = <&ps_clk>;
+					reg = <0x108 0x118>;
+					clock-output-names = "iopll";
+				};
+				uart_clk: uart_clk {
+					#clock-cells = <1>;
+					compatible = "xlnx,zynq-periph-clock";
+					clocks = <&iopll &armpll &ddrpll>;
+					reg = <0x154>;
+					clock-output-names = "uart0_ref_clk",
+							     "uart1_ref_clk";
+				};
+				cpu_clk: cpu_clk {
+					#clock-cells = <1>;
+					compatible = "xlnx,zynq-cpu-clock";
+					clocks = <&iopll &armpll &ddrpll>;
+					reg = <0x120 0x1C4>;
+					clock-output-names = "cpu_6x4x",
+							     "cpu_3x2x",
+							     "cpu_2x",
+							     "cpu_1x";
+				};
+			};
+		};
+
+		ttc0: ttc0@f8001000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "xlnx,ttc";
+			reg = <0xF8001000 0x1000>;
+			clocks = <&cpu_clk 3>;
+			clock-names = "cpu_1x";
+			clock-ranges;
+
+			ttc0_0: ttc0.0 {
+				status = "disabled";
+				reg = <0>;
+				interrupts = <0 10 4>;
+			};
+			ttc0_1: ttc0.1 {
+				status = "disabled";
+				reg = <1>;
+				interrupts = <0 11 4>;
+			};
+			ttc0_2: ttc0.2 {
+				status = "disabled";
+				reg = <2>;
+				interrupts = <0 12 4>;
+			};
+		};
+
+		ttc1: ttc1@f8002000 {
+			#interrupt-parent = <&intc>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "xlnx,ttc";
+			reg = <0xF8002000 0x1000>;
+			clocks = <&cpu_clk 3>;
+			clock-names = "cpu_1x";
+			clock-ranges;
+
+			ttc1_0: ttc1.0 {
+				status = "disabled";
+				reg = <0>;
+				interrupts = <0 37 4>;
+			};
+			ttc1_1: ttc1.1 {
+				status = "disabled";
+				reg = <1>;
+				interrupts = <0 38 4>;
+			};
+			ttc1_2: ttc1.2 {
+				status = "disabled";
+				reg = <2>;
+				interrupts = <0 39 4>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/zynq-ep107.dts b/arch/arm/boot/dts/zynq-ep107.dts
deleted file mode 100644
index 574bc04..0000000
--- a/arch/arm/boot/dts/zynq-ep107.dts
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- *  Copyright (C) 2011 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/dts-v1/;
-/ {
-	model = "Xilinx Zynq EP107";
-	compatible = "xlnx,zynq-ep107";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&intc>;
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x10000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyPS0,9600 root=/dev/ram rw initrd=0x800000,8M earlyprintk";
-		linux,stdout-path = &uart0;
-	};
-
-	amba {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		intc: interrupt-controller@f8f01000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			#address-cells = <1>;
-			interrupt-controller;
-			reg = <0xF8F01000 0x1000>,
-			      <0xF8F00100 0x100>;
-		};
-
-		L2: cache-controller {
-			compatible = "arm,pl310-cache";
-			reg = <0xF8F02000 0x1000>;
-			arm,data-latency = <2 3 2>;
-			arm,tag-latency = <2 3 2>;
-			cache-unified;
-			cache-level = <2>;
-		};
-
-		uart0: uart@e0000000 {
-			compatible = "xlnx,xuartps";
-			reg = <0xE0000000 0x1000>;
-			interrupts = <0 27 4>;
-			clock = <50000000>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
new file mode 100644
index 0000000..c772942
--- /dev/null
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -0,0 +1,44 @@
+/*
+ *  Copyright (C) 2011 Xilinx
+ *  Copyright (C) 2012 National Instruments Corp.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+	model = "Zynq ZC702 Development Board";
+	compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyPS1,115200 earlyprintk";
+	};
+
+};
+
+&ps_clk {
+	clock-frequency = <33333330>;
+};
+
+&ttc0_0 {
+	status = "ok";
+	compatible = "xlnx,ttc-counter-clocksource";
+};
+
+&ttc0_1 {
+	status = "ok";
+	compatible = "xlnx,ttc-counter-clockevent";
+};