diff options
author | Arnd Bergmann <arnd@arndb.de> | 2014-05-23 22:35:56 +0200 |
---|---|---|
committer | Arnd Bergmann <arnd@arndb.de> | 2014-05-23 22:35:56 +0200 |
commit | 21c27cabe69bdce92130364efe5d945323b37986 (patch) | |
tree | d1d00cf490b0e548226a4cece2e17de1cd20e151 /arch/arm/boot | |
parent | dee1c20c2a16bb73f1efaed5a535fcc64fdeb72d (diff) | |
parent | ca766449a8116f8174e9928d1f4889a858c07610 (diff) | |
download | op-kernel-dev-21c27cabe69bdce92130364efe5d945323b37986.zip op-kernel-dev-21c27cabe69bdce92130364efe5d945323b37986.tar.gz |
Merge tag 'sti-dt-for-v3.16-1' of git://git.stlinux.com/devel/kernel/linux-sti into next/dt
Merge "ARM: STi: DT changes for v3.16, v3" from Maxime Coquelin:
Please consider these STi DT updates for v3.16.
This 3rd version takes into account Olof's comments on the v2:
- Fix upper-cases in labels and node names
- Sort compatibles order from specific to generic
- Sort dts entries in Makefile
It also adds support for the B2020 revision E board for STiH416 SoC.
Note that two reset patches are part of this pull request, in order to avoid
compilation breakage.
Adding these two patches in this pull request has been accepted by Philipp Zabel.
* tag 'sti-dt-for-v3.16-1' of git://git.stlinux.com/devel/kernel/linux-sti: (23 commits)
ARM: sti: stih41x: Provide a proper header for this DTSI file
ARM: sti: stih416: Enable board LED support for B2020 RevE
ARM: sti: stih416: Add support for B2020 RevE
ARM: STi: DT: STiH41x Add clk_ignore_unused to bootargs
ARM: STi: DT: STiH415: 415 DT Entry for clockgen A9
ARM: STi: DT: STiH415: Remove unused CLK_S_GMAC0_PHY & CLK_S_ETH1_PHY fixed clocks
ARM: STi: DT: STiH415: Remove unused CLK_S_ICN_REG_0 fixed clock
ARM: STi: DT: STiH415: 415 DT Entry for clockgen A0/1/10/11/12
ARM: STi: DT: STiH416: 416 DT Entry for clockgen A9/DDR/GPU
ARM: STi: DT: STiH416: 416 DT Entry for clockgen B/C/D/E/F
ARM: STi: DT: STiH416: Remove unused CLK_S_GMAC0_PHY & CLK_S_ETH1_PHY fixed clocks
ARM: STi: DT: STiH416: Remove unused CLK_S_ICN_REG_0 fixed clock
ARM: STi: DT: STiH416: 416 DT Entry for clockgen A0/1/10/11/12
ARM: STi: DT: STiH41x: Rename CLK_SYSIN into clk_sysin
ARM: STi: DT: add keyscan for stih41x-b2000
ARM: STi: DT: add keyscan for stih416
ARM: STi: DT: add keyscan for stih415
driver: reset: sti: add keyscan for stih416
driver: reset: sti: add keyscan for stih415
ARM: dts: STiH407: Add B2120 board support
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'arch/arm/boot')
-rw-r--r-- | arch/arm/boot/dts/Makefile | 8 | ||||
-rw-r--r-- | arch/arm/boot/dts/stih407-b2120.dts | 78 | ||||
-rw-r--r-- | arch/arm/boot/dts/stih407-clock.dtsi | 39 | ||||
-rw-r--r-- | arch/arm/boot/dts/stih407-pinctrl.dtsi | 615 | ||||
-rw-r--r-- | arch/arm/boot/dts/stih407.dtsi | 263 | ||||
-rw-r--r-- | arch/arm/boot/dts/stih415-b2000.dts | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/stih415-b2020.dts | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/stih415-clock.dtsi | 519 | ||||
-rw-r--r-- | arch/arm/boot/dts/stih415-pinctrl.dtsi | 16 | ||||
-rw-r--r-- | arch/arm/boot/dts/stih415.dtsi | 30 | ||||
-rw-r--r-- | arch/arm/boot/dts/stih416-b2000.dts | 3 | ||||
-rw-r--r-- | arch/arm/boot/dts/stih416-b2020-revE.dts | 35 | ||||
-rw-r--r-- | arch/arm/boot/dts/stih416-b2020.dts | 3 | ||||
-rw-r--r-- | arch/arm/boot/dts/stih416-clock.dtsi | 735 | ||||
-rw-r--r-- | arch/arm/boot/dts/stih416-pinctrl.dtsi | 16 | ||||
-rw-r--r-- | arch/arm/boot/dts/stih416.dtsi | 30 | ||||
-rw-r--r-- | arch/arm/boot/dts/stih41x-b2000.dtsi | 25 | ||||
-rw-r--r-- | arch/arm/boot/dts/stih41x-b2020.dtsi | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/stih41x.dtsi | 7 |
19 files changed, 2363 insertions, 65 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index d6a9e72..e095bd2 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -336,10 +336,12 @@ dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \ spear320-evb.dtb \ spear320-hmi.dtb dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb -dtb-$(CONFIG_ARCH_STI)+= stih415-b2000.dtb \ - stih416-b2000.dtb \ +dtb-$(CONFIG_ARCH_STI)+= stih407-b2120.dtb \ + stih415-b2000.dtb \ stih415-b2020.dtb \ - stih416-b2020.dtb + stih416-b2000.dtb \ + stih416-b2020.dtb \ + stih416-b2020-revE.dtb dtb-$(CONFIG_ARCH_SUNXI) += \ sun4i-a10-a1000.dtb \ sun4i-a10-cubieboard.dtb \ diff --git a/arch/arm/boot/dts/stih407-b2120.dts b/arch/arm/boot/dts/stih407-b2120.dts new file mode 100644 index 0000000..fe69f92 --- /dev/null +++ b/arch/arm/boot/dts/stih407-b2120.dts @@ -0,0 +1,78 @@ +/* + * Copyright (C) 2014 STMicroelectronics (R&D) Limited. + * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; +#include "stih407.dtsi" +/ { + model = "STiH407 B2120"; + compatible = "st,stih407-b2120", "st,stih407"; + + chosen { + bootargs = "console=ttyAS0,115200"; + linux,stdout-path = &sbc_serial0; + }; + + memory { + device_type = "memory"; + reg = <0x40000000 0x80000000>; + }; + + aliases { + ttyAS0 = &sbc_serial0; + }; + + soc { + sbc_serial0: serial@9530000 { + status = "okay"; + }; + + leds { + compatible = "gpio-leds"; + red { + #gpio-cells = <2>; + label = "Front Panel LED"; + gpios = <&pio4 1 0>; + linux,default-trigger = "heartbeat"; + }; + green { + #gpio-cells = <2>; + gpios = <&pio1 3 0>; + default-state = "off"; + }; + }; + + i2c@9842000 { + status = "okay"; + }; + + i2c@9843000 { + status = "okay"; + }; + + i2c@9844000 { + status = "okay"; + }; + + i2c@9845000 { + status = "okay"; + }; + + i2c@9540000 { + status = "okay"; + }; + + /* SSC11 to HDMI */ + i2c@9541000 { + status = "okay"; + /* HDMI V1.3a supports Standard mode only */ + clock-frequency = <100000>; + st,i2c-min-scl-pulse-width-us = <0>; + st,i2c-min-sda-pulse-width-us = <5>; + }; + }; +}; diff --git a/arch/arm/boot/dts/stih407-clock.dtsi b/arch/arm/boot/dts/stih407-clock.dtsi new file mode 100644 index 0000000..800f46f --- /dev/null +++ b/arch/arm/boot/dts/stih407-clock.dtsi @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2014 STMicroelectronics R&D Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/ { + clocks { + /* + * Fixed 30MHz oscillator inputs to SoC + */ + clk_sysin: clk-sysin { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <30000000>; + }; + + /* + * ARM Peripheral clock for timers + */ + arm_periph_clk: arm-periph-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <600000000>; + }; + + /* + * Bootloader initialized system infrastructure clock for + * serial devices. + */ + clk_ext2f_a9: clockgen-c0@13 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <200000000>; + clock-output-names = "clk-s-icn-reg-0"; + }; + }; +}; diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi new file mode 100644 index 0000000..402844c --- /dev/null +++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi @@ -0,0 +1,615 @@ +/* + * Copyright (C) 2014 STMicroelectronics Limited. + * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ +#include "st-pincfg.h" +#include <dt-bindings/interrupt-controller/arm-gic.h> +/ { + + aliases { + /* 0-5: PIO_SBC */ + gpio0 = &pio0; + gpio1 = &pio1; + gpio2 = &pio2; + gpio3 = &pio3; + gpio4 = &pio4; + gpio5 = &pio5; + /* 10-19: PIO_FRONT0 */ + gpio6 = &pio10; + gpio7 = &pio11; + gpio8 = &pio12; + gpio9 = &pio13; + gpio10 = &pio14; + gpio11 = &pio15; + gpio12 = &pio16; + gpio13 = &pio17; + gpio14 = &pio18; + gpio15 = &pio19; + /* 20: PIO_FRONT1 */ + gpio16 = &pio20; + /* 30-35: PIO_REAR */ + gpio17 = &pio30; + gpio18 = &pio31; + gpio19 = &pio32; + gpio20 = &pio33; + gpio21 = &pio34; + gpio22 = &pio35; + /* 40-42: PIO_FLASH */ + gpio23 = &pio40; + gpio24 = &pio41; + gpio25 = &pio42; + }; + + soc { + pin-controller-sbc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stih407-sbc-pinctrl"; + st,syscfg = <&syscfg_sbc>; + reg = <0x0961f080 0x4>; + reg-names = "irqmux"; + interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>; + interrupts-names = "irqmux"; + ranges = <0 0x09610000 0x6000>; + + pio0: gpio@09610000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x100>; + st,bank-name = "PIO0"; + }; + pio1: gpio@09611000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1000 0x100>; + st,bank-name = "PIO1"; + }; + pio2: gpio@09612000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2000 0x100>; + st,bank-name = "PIO2"; + }; + pio3: gpio@09613000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x3000 0x100>; + st,bank-name = "PIO3"; + }; + pio4: gpio@09614000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x4000 0x100>; + st,bank-name = "PIO4"; + }; + + pio5: gpio@09615000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x5000 0x100>; + st,bank-name = "PIO5"; + }; + + rc { + pinctrl_ir: ir0 { + st,pins { + ir = <&pio4 0 ALT2 IN>; + }; + }; + }; + + /* SBC_ASC0 - UART10 */ + sbc_serial0 { + pinctrl_sbc_serial0: sbc_serial0-0 { + st,pins { + tx = <&pio3 4 ALT1 OUT>; + rx = <&pio3 5 ALT1 IN>; + }; + }; + }; + /* SBC_ASC1 - UART11 */ + sbc_serial1 { + pinctrl_sbc_serial1: sbc_serial1-0 { + st,pins { + tx = <&pio2 6 ALT3 OUT>; + rx = <&pio2 7 ALT3 IN>; + }; + }; + }; + + i2c10 { + pinctrl_i2c10_default: i2c10-default { + st,pins { + sda = <&pio4 6 ALT1 BIDIR>; + scl = <&pio4 5 ALT1 BIDIR>; + }; + }; + }; + + i2c11 { + pinctrl_i2c11_default: i2c11-default { + st,pins { + sda = <&pio5 1 ALT1 BIDIR>; + scl = <&pio5 0 ALT1 BIDIR>; + }; + }; + }; + + keyscan { + pinctrl_keyscan: keyscan { + st,pins { + keyin0 = <&pio4 0 ALT6 IN>; + keyin1 = <&pio4 5 ALT4 IN>; + keyin2 = <&pio0 4 ALT2 IN>; + keyin3 = <&pio2 6 ALT2 IN>; + + keyout0 = <&pio4 6 ALT4 OUT>; + keyout1 = <&pio1 7 ALT2 OUT>; + keyout2 = <&pio0 6 ALT2 OUT>; + keyout3 = <&pio2 7 ALT2 OUT>; + }; + }; + }; + + gmac1 { + /* + * Almost all the boards based on STiH407 SoC have an embedded + * switch where the mdio/mdc have been used for managing the SMI + * iface via I2C. For this reason these lines can be allocated + * by using dedicated configuration (in case of there will be a + * standard PHY transceiver on-board). + */ + pinctrl_rgmii1: rgmii1-0 { + st,pins { + + txd0 = <&pio0 0 ALT1 OUT DE_IO 0 CLK_A>; + txd1 = <&pio0 1 ALT1 OUT DE_IO 0 CLK_A>; + txd2 = <&pio0 2 ALT1 OUT DE_IO 0 CLK_A>; + txd3 = <&pio0 3 ALT1 OUT DE_IO 0 CLK_A>; + txen = <&pio0 5 ALT1 OUT DE_IO 0 CLK_A>; + txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>; + rxd0 = <&pio1 4 ALT1 IN DE_IO 0 CLK_A>; + rxd1 = <&pio1 5 ALT1 IN DE_IO 0 CLK_A>; + rxd2 = <&pio1 6 ALT1 IN DE_IO 0 CLK_A>; + rxd3 = <&pio1 7 ALT1 IN DE_IO 0 CLK_A>; + rxdv = <&pio2 0 ALT1 IN DE_IO 0 CLK_A>; + rxclk = <&pio2 2 ALT1 IN NICLK 500 CLK_A>; + clk125 = <&pio3 7 ALT4 IN NICLK 0 CLK_A>; + phyclk = <&pio2 3 ALT4 OUT NICLK 1750 CLK_B>; + }; + }; + + pinctrl_rgmii1_mdio: rgmii1-mdio { + st,pins { + mdio = <&pio1 0 ALT1 OUT BYPASS 0>; + mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>; + mdint = <&pio1 3 ALT1 IN BYPASS 0>; + }; + }; + + pinctrl_mii1: mii1 { + st,pins { + txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txd2 = <&pio0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txd3 = <&pio0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txer = <&pio0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>; + col = <&pio0 7 ALT1 IN BYPASS 1000>; + + mdio = <&pio1 0 ALT1 OUT BYPASS 1500>; + mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>; + crs = <&pio1 2 ALT1 IN BYPASS 1000>; + mdint = <&pio1 3 ALT1 IN BYPASS 0>; + rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rxd2 = <&pio1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rxd3 = <&pio1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>; + + rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>; + rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>; + phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>; + }; + }; + }; + + pwm1 { + pinctrl_pwm1_chan0_default: pwm1-0-default { + st,pins { + pwm-out = <&pio3 0 ALT1 OUT>; + }; + }; + pinctrl_pwm1_chan1_default: pwm1-1-default { + st,pins { + pwm-out = <&pio4 4 ALT1 OUT>; + }; + }; + pinctrl_pwm1_chan2_default: pwm1-2-default { + st,pins { + pwm-out = <&pio4 6 ALT3 OUT>; + }; + }; + pinctrl_pwm1_chan3_default: pwm1-3-default { + st,pins { + pwm-out = <&pio4 7 ALT3 OUT>; + }; + }; + }; + }; + + pin-controller-front0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stih407-front-pinctrl"; + st,syscfg = <&syscfg_front>; + reg = <0x0920f080 0x4>; + reg-names = "irqmux"; + interrupts = <GIC_SPI 189 IRQ_TYPE_NONE>; + interrupts-names = "irqmux"; + ranges = <0 0x09200000 0x10000>; + + pio10: pio@09200000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x100>; + st,bank-name = "PIO10"; + }; + pio11: pio@09201000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1000 0x100>; + st,bank-name = "PIO11"; + }; + pio12: pio@09202000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2000 0x100>; + st,bank-name = "PIO12"; + }; + pio13: pio@09203000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x3000 0x100>; + st,bank-name = "PIO13"; + }; + pio14: pio@09204000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x4000 0x100>; + st,bank-name = "PIO14"; + }; + pio15: pio@09205000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x5000 0x100>; + st,bank-name = "PIO15"; + }; + pio16: pio@09206000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x6000 0x100>; + st,bank-name = "PIO16"; + }; + pio17: pio@09207000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x7000 0x100>; + st,bank-name = "PIO17"; + }; + pio18: pio@09208000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x8000 0x100>; + st,bank-name = "PIO18"; + }; + pio19: pio@09209000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x9000 0x100>; + st,bank-name = "PIO19"; + }; + + /* Comms */ + serial0 { + pinctrl_serial0: serial0-0 { + st,pins { + tx = <&pio17 0 ALT1 OUT>; + rx = <&pio17 1 ALT1 IN>; + }; + }; + }; + + serial1 { + pinctrl_serial1: serial1-0 { + st,pins { + tx = <&pio16 0 ALT1 OUT>; + rx = <&pio16 1 ALT1 IN>; + }; + }; + }; + + serial2 { + pinctrl_serial2: serial2-0 { + st,pins { + tx = <&pio15 0 ALT1 OUT>; + rx = <&pio15 1 ALT1 IN>; + }; + }; + }; + + mmc1 { + pinctrl_sd1: sd1-0 { + st,pins { + sd_clk = <&pio19 3 ALT5 BIDIR NICLK 0 CLK_B>; + sd_cmd = <&pio19 2 ALT5 BIDIR_PU BYPASS 0>; + sd_dat0 = <&pio19 4 ALT5 BIDIR_PU BYPASS 0>; + sd_dat1 = <&pio19 5 ALT5 BIDIR_PU BYPASS 0>; + sd_dat2 = <&pio19 6 ALT5 BIDIR_PU BYPASS 0>; + sd_dat3 = <&pio19 7 ALT5 BIDIR_PU BYPASS 0>; + sd_led = <&pio16 6 ALT6 OUT>; + sd_pwren = <&pio16 7 ALT6 OUT>; + sd_cd = <&pio19 0 ALT6 IN>; + sd_wp = <&pio19 1 ALT6 IN>; + }; + }; + }; + + + i2c0 { + pinctrl_i2c0_default: i2c0-default { + st,pins { + sda = <&pio10 6 ALT2 BIDIR>; + scl = <&pio10 5 ALT2 BIDIR>; + }; + }; + }; + + i2c1 { + pinctrl_i2c1_default: i2c1-default { + st,pins { + sda = <&pio11 1 ALT2 BIDIR>; + scl = <&pio11 0 ALT2 BIDIR>; + }; + }; + }; + + i2c2 { + pinctrl_i2c2_default: i2c2-default { + st,pins { + sda = <&pio15 6 ALT2 BIDIR>; + scl = <&pio15 5 ALT2 BIDIR>; + }; + }; + }; + + i2c3 { + pinctrl_i2c3_default: i2c3-default { + st,pins { + sda = <&pio18 6 ALT1 BIDIR>; + scl = <&pio18 5 ALT1 BIDIR>; + }; + }; + }; + + spi0 { + pinctrl_spi0_default: spi0-default { + st,pins { + mtsr = <&pio12 6 ALT2 BIDIR>; + mrst = <&pio12 7 ALT2 BIDIR>; + scl = <&pio12 5 ALT2 BIDIR>; + }; + }; + }; + }; + + pin-controller-front1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stih407-front-pinctrl"; + st,syscfg = <&syscfg_front>; + reg = <0x0921f080 0x4>; + reg-names = "irqmux"; + interrupts = <GIC_SPI 190 IRQ_TYPE_NONE>; + interrupts-names = "irqmux"; + ranges = <0 0x09210000 0x10000>; + + pio20: pio@09210000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x100>; + st,bank-name = "PIO20"; + }; + }; + + pin-controller-rear { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stih407-rear-pinctrl"; + st,syscfg = <&syscfg_rear>; + reg = <0x0922f080 0x4>; + reg-names = "irqmux"; + interrupts = <GIC_SPI 191 IRQ_TYPE_NONE>; + interrupts-names = "irqmux"; + ranges = <0 0x09220000 0x6000>; + + pio30: gpio@09220000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0x100>; + st,bank-name = "PIO30"; + }; + pio31: gpio@09221000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1000 0x100>; + st,bank-name = "PIO31"; + }; + pio32: gpio@09222000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2000 0x100>; + st,bank-name = "PIO32"; + }; + pio33: gpio@09223000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x3000 0x100>; + st,bank-name = "PIO33"; + }; + pio34: gpio@09224000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x4000 0x100>; + st,bank-name = "PIO34"; + }; + pio35: gpio@09225000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x5000 0x100>; + st,bank-name = "PIO35"; + }; + + i2c4 { + pinctrl_i2c4_default: i2c4-default { + st,pins { + sda = <&pio30 1 ALT1 BIDIR>; + scl = <&pio30 0 ALT1 BIDIR>; + }; + }; + }; + + i2c5 { + pinctrl_i2c5_default: i2c5-default { + st,pins { + sda = <&pio34 4 ALT1 BIDIR>; + scl = <&pio34 3 ALT1 BIDIR>; + }; + }; + }; + + usb3 { + pinctrl_usb3: usb3-2 { + st,pins { + usb-oc-detect = <&pio35 4 ALT1 IN>; + usb-pwr-enable = <&pio35 5 ALT1 OUT>; + usb-vbus-valid = <&pio35 6 ALT1 IN>; + }; + }; + }; + + pwm0 { + pinctrl_pwm0_chan0_default: pwm0-0-default { + st,pins { + pwm-out = <&pio31 1 ALT1 OUT>; + }; + }; + }; + }; + + pin-controller-flash { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,stih407-flash-pinctrl"; + st,syscfg = <&syscfg_flash>; + reg = <0x0923f080 0x4>; + reg-names = "irqmux"; + interrupts = <GIC_SPI 192 IRQ_TYPE_NONE>; + interrupts-names = "irqmux"; + ranges = <0 0x09230000 0x3000>; + + pio40: gpio@09230000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0 0x100>; + st,bank-name = "PIO40"; + }; + pio41: gpio@09231000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x1000 0x100>; + st,bank-name = "PIO41"; + }; + pio42: gpio@09232000 { + gpio-controller; + #gpio-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x2000 0x100>; + st,bank-name = "PIO42"; + }; + + mmc0 { + pinctrl_mmc0: mmc0-0 { + st,pins { + emmc_clk = <&pio40 6 ALT1 BIDIR>; + emmc_cmd = <&pio40 7 ALT1 BIDIR_PU>; + emmc_d0 = <&pio41 0 ALT1 BIDIR_PU>; + emmc_d1 = <&pio41 1 ALT1 BIDIR_PU>; + emmc_d2 = <&pio41 2 ALT1 BIDIR_PU>; + emmc_d3 = <&pio41 3 ALT1 BIDIR_PU>; + emmc_d4 = <&pio41 4 ALT1 BIDIR_PU>; + emmc_d5 = <&pio41 5 ALT1 BIDIR_PU>; + emmc_d6 = <&pio41 6 ALT1 BIDIR_PU>; + emmc_d7 = <&pio41 7 ALT1 BIDIR_PU>; + }; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi new file mode 100644 index 0000000..4f9024f --- /dev/null +++ b/arch/arm/boot/dts/stih407.dtsi @@ -0,0 +1,263 @@ +/* + * Copyright (C) 2014 STMicroelectronics Limited. + * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ +#include "stih407-clock.dtsi" +#include "stih407-pinctrl.dtsi" +/ { + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + }; + }; + + intc: interrupt-controller@08761000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x08761000 0x1000>, <0x08760100 0x100>; + }; + + scu@08760000 { + compatible = "arm,cortex-a9-scu"; + reg = <0x08760000 0x1000>; + }; + + timer@08760200 { + interrupt-parent = <&intc>; + compatible = "arm,cortex-a9-global-timer"; + reg = <0x08760200 0x100>; + interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&arm_periph_clk>; + }; + + l2: cache-controller { + compatible = "arm,pl310-cache"; + reg = <0x08762000 0x1000>; + arm,data-latency = <3 3 3>; + arm,tag-latency = <2 2 2>; + cache-unified; + cache-level = <2>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + ranges; + compatible = "simple-bus"; + + syscfg_sbc: sbc-syscfg@9620000 { + compatible = "st,stih407-sbc-syscfg", "syscon"; + reg = <0x9620000 0x1000>; + }; + + syscfg_front: front-syscfg@9280000 { + compatible = "st,stih407-front-syscfg", "syscon"; + reg = <0x9280000 0x1000>; + }; + + syscfg_rear: rear-syscfg@9290000 { + compatible = "st,stih407-rear-syscfg", "syscon"; + reg = <0x9290000 0x1000>; + }; + + syscfg_flash: flash-syscfg@92a0000 { + compatible = "st,stih407-flash-syscfg", "syscon"; + reg = <0x92a0000 0x1000>; + }; + + syscfg_sbc_reg: fvdp-lite-syscfg@9600000 { + compatible = "st,stih407-sbc-reg-syscfg", "syscon"; + reg = <0x9600000 0x1000>; + }; + + syscfg_core: core-syscfg@92b0000 { + compatible = "st,stih407-core-syscfg", "syscon"; + reg = <0x92b0000 0x1000>; + }; + + syscfg_lpm: lpm-syscfg@94b5100 { + compatible = "st,stih407-lpm-syscfg", "syscon"; + reg = <0x94b5100 0x1000>; + }; + + serial@9830000 { + compatible = "st,asc"; + reg = <0x9830000 0x2c>; + interrupts = <GIC_SPI 122 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_serial0>; + clocks = <&clk_ext2f_a9>; + + status = "disabled"; + }; + + serial@9831000 { + compatible = "st,asc"; + reg = <0x9831000 0x2c>; + interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_serial1>; + clocks = <&clk_ext2f_a9>; + + status = "disabled"; + }; + + serial@9832000 { + compatible = "st,asc"; + reg = <0x9832000 0x2c>; + interrupts = <GIC_SPI 124 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_serial2>; + clocks = <&clk_ext2f_a9>; + + status = "disabled"; + }; + + /* SBC_ASC0 - UART10 */ + sbc_serial0: serial@9530000 { + compatible = "st,asc"; + reg = <0x9530000 0x2c>; + interrupts = <GIC_SPI 138 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sbc_serial0>; + clocks = <&clk_sysin>; + + status = "disabled"; + }; + + serial@9531000 { + compatible = "st,asc"; + reg = <0x9531000 0x2c>; + interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sbc_serial1>; + clocks = <&clk_sysin>; + + status = "disabled"; + }; + + i2c@9840000 { + compatible = "st,comms-ssc4-i2c"; + interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x9840000 0x110>; + clocks = <&clk_ext2f_a9>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0_default>; + + status = "disabled"; + }; + + i2c@9841000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0x9841000 0x110>; + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_ext2f_a9>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_default>; + + status = "disabled"; + }; + + i2c@9842000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0x9842000 0x110>; + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_ext2f_a9>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_default>; + + status = "disabled"; + }; + + i2c@9843000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0x9843000 0x110>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_ext2f_a9>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3_default>; + + status = "disabled"; + }; + + i2c@9844000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0x9844000 0x110>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_ext2f_a9>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4_default>; + + status = "disabled"; + }; + + i2c@9845000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0x9845000 0x110>; + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_ext2f_a9>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c5_default>; + + status = "disabled"; + }; + + + /* SSCs on SBC */ + i2c@9540000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0x9540000 0x110>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_sysin>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c10_default>; + + status = "disabled"; + }; + + i2c@9541000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0x9541000 0x110>; + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_sysin>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c11_default>; + + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/stih415-b2000.dts b/arch/arm/boot/dts/stih415-b2000.dts index d4af531..bdfbd37 100644 --- a/arch/arm/boot/dts/stih415-b2000.dts +++ b/arch/arm/boot/dts/stih415-b2000.dts @@ -11,5 +11,5 @@ #include "stih41x-b2000.dtsi" / { model = "STiH415 B2000 Board"; - compatible = "st,stih415", "st,stih415-b2000"; + compatible = "st,stih415-b2000", "st,stih415"; }; diff --git a/arch/arm/boot/dts/stih415-b2020.dts b/arch/arm/boot/dts/stih415-b2020.dts index 442b019..71903a8 100644 --- a/arch/arm/boot/dts/stih415-b2020.dts +++ b/arch/arm/boot/dts/stih415-b2020.dts @@ -11,5 +11,5 @@ #include "stih41x-b2020.dtsi" / { model = "STiH415 B2020 Board"; - compatible = "st,stih415", "st,stih415-b2020"; + compatible = "st,stih415-b2020", "st,stih415"; }; diff --git a/arch/arm/boot/dts/stih415-clock.dtsi b/arch/arm/boot/dts/stih415-clock.dtsi index d047dbc..3ee3451 100644 --- a/arch/arm/boot/dts/stih415-clock.dtsi +++ b/arch/arm/boot/dts/stih415-clock.dtsi @@ -5,48 +5,529 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ + +#include <dt-bindings/clock/stih415-clks.h> + / { clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + /* * Fixed 30MHz oscillator input to SoC */ - CLK_SYSIN: CLK_SYSIN { + clk_sysin: clk-sysin { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <30000000>; }; /* - * ARM Peripheral clock for timers + * ClockGenAs on SASG1 */ - arm_periph_clk: arm_periph_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <500000000>; + clockgen-a@fee62000 { + reg = <0xfee62000 0xb48>; + + clk_s_a0_pll: clk-s-a0-pll { + #clock-cells = <1>; + compatible = "st,clkgena-plls-c65"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-a0-pll0-hs", + "clk-s-a0-pll0-ls", + "clk-s-a0-pll1"; + }; + + clk_s_a0_osc_prediv: clk-s-a0-osc-prediv { + #clock-cells = <0>; + compatible = "st,clkgena-prediv-c65", + "st,clkgena-prediv"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-a0-osc-prediv"; + }; + + clk_s_a0_hs: clk-s-a0-hs { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c65-hs", + "st,clkgena-divmux"; + + clocks = <&clk_s_a0_osc_prediv>, + <&clk_s_a0_pll 0>, /* PLL0 HS */ + <&clk_s_a0_pll 2>; /* PLL1 */ + + clock-output-names = "clk-s-fdma-0", + "clk-s-fdma-1", + ""; /* clk-s-jit-sense */ + /* Fourth output unused */ + }; + + clk_s_a0_ls: clk-s-a0-ls { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c65-ls", + "st,clkgena-divmux"; + + clocks = <&clk_s_a0_osc_prediv>, + <&clk_s_a0_pll 1>, /* PLL0 LS */ + <&clk_s_a0_pll 2>; /* PLL1 */ + + clock-output-names = "clk-s-icn-reg-0", + "clk-s-icn-if-0", + "clk-s-icn-reg-lp-0", + "clk-s-emiss", + "clk-s-eth1-phy", + "clk-s-mii-ref-out"; + /* Remaining outputs unused */ + }; + }; + + clockgen-a@fee81000 { + reg = <0xfee81000 0xb48>; + + clk_s_a1_pll: clk-s-a1-pll { + #clock-cells = <1>; + compatible = "st,clkgena-plls-c65"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-a1-pll0-hs", + "clk-s-a1-pll0-ls", + "clk-s-a1-pll1"; + }; + + clk_s_a1_osc_prediv: clk-s-a1-osc-prediv { + #clock-cells = <0>; + compatible = "st,clkgena-prediv-c65", + "st,clkgena-prediv"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-a1-osc-prediv"; + }; + + clk_s_a1_hs: clk-s-a1-hs { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c65-hs", + "st,clkgena-divmux"; + + clocks = <&clk_s_a1_osc_prediv>, + <&clk_s_a1_pll 0>, /* PLL0 HS */ + <&clk_s_a1_pll 2>; /* PLL1 */ + + clock-output-names = "", /* Reserved */ + "", /* Reserved */ + "clk-s-stac-phy", + "clk-s-vtac-tx-phy"; + }; + + clk_s_a1_ls: clk-s-a1-ls { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c65-ls", + "st,clkgena-divmux"; + + clocks = <&clk_s_a1_osc_prediv>, + <&clk_s_a1_pll 1>, /* PLL0 LS */ + <&clk_s_a1_pll 2>; /* PLL1 */ + + clock-output-names = "clk-s-icn-if-2", + "clk-s-card-mmc", + "clk-s-icn-if-1", + "clk-s-gmac0-phy", + "clk-s-nand-ctrl", + "", /* Reserved */ + "clk-s-mii0-ref-out", + ""; /* clk-s-stac-sys */ + /* Remaining outputs unused */ + }; }; /* - * Bootloader initialized system infrastructure clock for - * serial devices. + * ClockGenAs on MPE41 */ - CLKS_ICN_REG_0: CLKS_ICN_REG_0 { + clockgen-a@fde12000 { + reg = <0xfde12000 0xb50>; + + clk_m_a0_pll0: clk-m-a0-pll0 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a0-pll0-phi0", + "clk-m-a0-pll0-phi1", + "clk-m-a0-pll0-phi2", + "clk-m-a0-pll0-phi3"; + }; + + clk_m_a0_pll1: clk-m-a0-pll1 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a0-pll1-phi0", + "clk-m-a0-pll1-phi1", + "clk-m-a0-pll1-phi2", + "clk-m-a0-pll1-phi3"; + }; + + clk_m_a0_osc_prediv: clk-m-a0-osc-prediv { + #clock-cells = <0>; + compatible = "st,clkgena-prediv-c32", + "st,clkgena-prediv"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a0-osc-prediv"; + }; + + clk_m_a0_div0: clk-m-a0-div0 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf0", + "st,clkgena-divmux"; + + clocks = <&clk_m_a0_osc_prediv>, + <&clk_m_a0_pll0 0>, /* PLL0 PHI0 */ + <&clk_m_a0_pll1 0>; /* PLL1 PHI0 */ + + clock-output-names = "clk-m-apb-pm", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "clk-m-pp-dmu-0", + "clk-m-pp-dmu-1", + "clk-m-icm-disp", + ""; /* Unused */ + }; + + clk_m_a0_div1: clk-m-a0-div1 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf1", + "st,clkgena-divmux"; + + clocks = <&clk_m_a0_osc_prediv>, + <&clk_m_a0_pll0 1>, /* PLL0 PHI1 */ + <&clk_m_a0_pll1 1>; /* PLL1 PHI1 */ + + clock-output-names = "", /* Unused */ + "", /* Unused */ + "clk-m-a9-ext2f", + "clk-m-st40rt", + "clk-m-st231-dmu-0", + "clk-m-st231-dmu-1", + "clk-m-st231-aud", + "clk-m-st231-gp-0"; + }; + + clk_m_a0_div2: clk-m-a0-div2 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf2", + "st,clkgena-divmux"; + + clocks = <&clk_m_a0_osc_prediv>, + <&clk_m_a0_pll0 2>, /* PLL0 PHI2 */ + <&clk_m_a0_pll1 2>; /* PLL1 PHI2 */ + + clock-output-names = "clk-m-st231-gp-1", + "clk-m-icn-cpu", + "clk-m-icn-stac", + "clk-m-icn-dmu-0", + "clk-m-icn-dmu-1", + "", /* Unused */ + "", /* Unused */ + ""; /* Unused */ + }; + + clk_m_a0_div3: clk-m-a0-div3 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf3", + "st,clkgena-divmux"; + + clocks = <&clk_m_a0_osc_prediv>, + <&clk_m_a0_pll0 3>, /* PLL0 PHI3 */ + <&clk_m_a0_pll1 3>; /* PLL1 PHI3 */ + + clock-output-names = "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "clk-m-icn-eram", + "clk-m-a9-trace"; + }; + }; + + clockgen-a@fd6db000 { + reg = <0xfd6db000 0xb50>; + + clk_m_a1_pll0: clk-m-a1-pll0 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a1-pll0-phi0", + "clk-m-a1-pll0-phi1", + "clk-m-a1-pll0-phi2", + "clk-m-a1-pll0-phi3"; + }; + + clk_m_a1_pll1: clk-m-a1-pll1 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a1-pll1-phi0", + "clk-m-a1-pll1-phi1", + "clk-m-a1-pll1-phi2", + "clk-m-a1-pll1-phi3"; + }; + + clk_m_a1_osc_prediv: clk-m-a1-osc-prediv { + #clock-cells = <0>; + compatible = "st,clkgena-prediv-c32", + "st,clkgena-prediv"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a1-osc-prediv"; + }; + + clk_m_a1_div0: clk-m-a1-div0 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf0", + "st,clkgena-divmux"; + + clocks = <&clk_m_a1_osc_prediv>, + <&clk_m_a1_pll0 0>, /* PLL0 PHI0 */ + <&clk_m_a1_pll1 0>; /* PLL1 PHI0 */ + + clock-output-names = "clk-m-fdma-12", + "clk-m-fdma-10", + "clk-m-fdma-11", + "clk-m-hva-lmi", + "clk-m-proc-sc", + "clk-m-tp", + "clk-m-icn-gpu", + "clk-m-icn-vdp-0"; + }; + + clk_m_a1_div1: clk-m-a1-div1 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf1", + "st,clkgena-divmux"; + + clocks = <&clk_m_a1_osc_prediv>, + <&clk_m_a1_pll0 1>, /* PLL0 PHI1 */ + <&clk_m_a1_pll1 1>; /* PLL1 PHI1 */ + + clock-output-names = "clk-m-icn-vdp-1", + "clk-m-icn-vdp-2", + "clk-m-icn-vdp-3", + "clk-m-prv-t1-bus", + "clk-m-icn-vdp-4", + "clk-m-icn-reg-10", + "", /* Unused */ + ""; /* clk-m-icn-st231 */ + }; + + clk_m_a1_div2: clk-m-a1-div2 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf2", + "st,clkgena-divmux"; + + clocks = <&clk_m_a1_osc_prediv>, + <&clk_m_a1_pll0 2>, /* PLL0 PHI2 */ + <&clk_m_a1_pll1 2>; /* PLL1 PHI2 */ + + clock-output-names = "clk-m-fvdp-proc-alt", + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + ""; /* Unused */ + }; + + clk_m_a1_div3: clk-m-a1-div3 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf3", + "st,clkgena-divmux"; + + clocks = <&clk_m_a1_osc_prediv>, + <&clk_m_a1_pll0 3>, /* PLL0 PHI3 */ + <&clk_m_a1_pll1 3>; /* PLL1 PHI3 */ + + clock-output-names = "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + ""; /* Unused */ + }; + }; + + clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2 { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <100000000>; + compatible = "fixed-factor-clock"; + clocks = <&clk_m_a0_div1 2>; + clock-div = <2>; + clock-mult = <1>; }; - CLKS_GMAC0_PHY: clockgenA1@7 { + clockgen-a@fd345000 { + reg = <0xfd345000 0xb50>; + + clk_m_a2_pll0: clk-m-a2-pll0 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a2-pll0-phi0", + "clk-m-a2-pll0-phi1", + "clk-m-a2-pll0-phi2", + "clk-m-a2-pll0-phi3"; + }; + + clk_m_a2_pll1: clk-m-a2-pll1 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a2-pll1-phi0", + "clk-m-a2-pll1-phi1", + "clk-m-a2-pll1-phi2", + "clk-m-a2-pll1-phi3"; + }; + + clk_m_a2_osc_prediv: clk-m-a2-osc-prediv { + #clock-cells = <0>; + compatible = "st,clkgena-prediv-c32", + "st,clkgena-prediv"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a2-osc-prediv"; + }; + + clk_m_a2_div0: clk-m-a2-div0 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf0", + "st,clkgena-divmux"; + + clocks = <&clk_m_a2_osc_prediv>, + <&clk_m_a2_pll0 0>, /* PLL0 PHI0 */ + <&clk_m_a2_pll1 0>; /* PLL1 PHI0 */ + + clock-output-names = "clk-m-vtac-main-phy", + "clk-m-vtac-aux-phy", + "clk-m-stac-phy", + "clk-m-stac-sys", + "", /* clk-m-mpestac-pg */ + "", /* clk-m-mpestac-wc */ + "", /* clk-m-mpevtacaux-pg*/ + ""; /* clk-m-mpevtacmain-pg*/ + }; + + clk_m_a2_div1: clk-m-a2-div1 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf1", + "st,clkgena-divmux"; + + clocks = <&clk_m_a2_osc_prediv>, + <&clk_m_a2_pll0 1>, /* PLL0 PHI1 */ + <&clk_m_a2_pll1 1>; /* PLL1 PHI1 */ + + clock-output-names = "", /* clk-m-mpevtacrx0-wc */ + "", /* clk-m-mpevtacrx1-wc */ + "clk-m-compo-main", + "clk-m-compo-aux", + "clk-m-bdisp-0", + "clk-m-bdisp-1", + "clk-m-icn-bdisp-0", + "clk-m-icn-bdisp-1"; + }; + + clk_m_a2_div2: clk-m-a2-div2 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf2", + "st,clkgena-divmux"; + + clocks = <&clk_m_a2_osc_prediv>, + <&clk_m_a2_pll0 2>, /* PLL0 PHI2 */ + <&clk_m_a2_pll1 2>; /* PLL1 PHI2 */ + + clock-output-names = "", /* clk-m-icn-hqvdp0 */ + "", /* clk-m-icn-hqvdp1 */ + "clk-m-icn-compo", + "", /* clk-m-icn-vdpaux */ + "clk-m-icn-ts", + "clk-m-icn-reg-lp-10", + "clk-m-dcephy-impctrl", + ""; /* Unused */ + }; + + clk_m_a2_div3: clk-m-a2-div3 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf3", + "st,clkgena-divmux"; + + clocks = <&clk_m_a2_osc_prediv>, + <&clk_m_a2_pll0 3>, /* PLL0 PHI3 */ + <&clk_m_a2_pll1 3>; /* PLL1 PHI3 */ + + clock-output-names = ""; /* Unused */ + /* Remaining outputs unused */ + }; + }; + + /* + * A9 PLL + */ + clockgen-a9@fdde00d8 { + reg = <0xfdde00d8 0x70>; + + clockgen_a9_pll: clockgen-a9-pll { + #clock-cells = <1>; + compatible = "st,stih415-plls-c32-a9", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + clock-output-names = "clockgen-a9-pll-odf"; + }; + }; + + /* + * ARM CPU related clocks + */ + clk_m_a9: clk-m-a9@fdde00d8 { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <25000000>; - clock-output-names = "CLKS_GMAC0_PHY"; + compatible = "st,stih415-clkgen-a9-mux", "st,clkgen-mux"; + reg = <0xfdde00d8 0x4>; + clocks = <&clockgen_a9_pll 0>, + <&clockgen_a9_pll 0>, + <&clk_m_a0_div1 2>, + <&clk_m_a9_ext2f_div2>; }; - CLKS_ETH1_PHY: clockgenA0@7 { + /* + * ARM Peripheral clock for timers + */ + arm_periph_clk: clk-m-a9-periphs { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <25000000>; - clock-output-names = "CLKS_ETH1_PHY"; + compatible = "fixed-factor-clock"; + clocks = <&clk_m_a9>; + clock-div = <2>; + clock-mult = <1>; }; }; }; diff --git a/arch/arm/boot/dts/stih415-pinctrl.dtsi b/arch/arm/boot/dts/stih415-pinctrl.dtsi index 81df870..8509a03 100644 --- a/arch/arm/boot/dts/stih415-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih415-pinctrl.dtsi @@ -102,6 +102,22 @@ }; }; + keyscan { + pinctrl_keyscan: keyscan { + st,pins { + keyin0 = <&PIO0 2 ALT2 IN>; + keyin1 = <&PIO0 3 ALT2 IN>; + keyin2 = <&PIO0 4 ALT2 IN>; + keyin3 = <&PIO2 6 ALT2 IN>; + + keyout0 = <&PIO1 6 ALT2 OUT>; + keyout1 = <&PIO1 7 ALT2 OUT>; + keyout2 = <&PIO0 6 ALT2 OUT>; + keyout3 = <&PIO2 7 ALT2 OUT>; + }; + }; + }; + sbc_i2c0 { pinctrl_sbc_i2c0_default: sbc_i2c0-default { st,pins { diff --git a/arch/arm/boot/dts/stih415.dtsi b/arch/arm/boot/dts/stih415.dtsi index d89064c..d6f254f 100644 --- a/arch/arm/boot/dts/stih415.dtsi +++ b/arch/arm/boot/dts/stih415.dtsi @@ -82,7 +82,7 @@ interrupts = <0 197 0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_serial2>; - clocks = <&CLKS_ICN_REG_0>; + clocks = <&clk_s_a0_ls CLK_ICN_REG>; }; /* SBC comms block ASCs in SASG1 */ @@ -91,7 +91,7 @@ status = "disabled"; reg = <0xfe531000 0x2c>; interrupts = <0 210 0>; - clocks = <&CLK_SYSIN>; + clocks = <&clk_sysin>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sbc_serial1>; }; @@ -100,7 +100,7 @@ compatible = "st,comms-ssc4-i2c"; reg = <0xfed40000 0x110>; interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CLKS_ICN_REG_0>; + clocks = <&clk_s_a0_ls CLK_ICN_REG>; clock-names = "ssc"; clock-frequency = <400000>; pinctrl-names = "default"; @@ -113,7 +113,7 @@ compatible = "st,comms-ssc4-i2c"; reg = <0xfed41000 0x110>; interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CLKS_ICN_REG_0>; + clocks = <&clk_s_a0_ls CLK_ICN_REG>; clock-names = "ssc"; clock-frequency = <400000>; pinctrl-names = "default"; @@ -126,7 +126,7 @@ compatible = "st,comms-ssc4-i2c"; reg = <0xfe540000 0x110>; interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CLK_SYSIN>; + clocks = <&clk_sysin>; clock-names = "ssc"; clock-frequency = <400000>; pinctrl-names = "default"; @@ -139,7 +139,7 @@ compatible = "st,comms-ssc4-i2c"; reg = <0xfe541000 0x110>; interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CLK_SYSIN>; + clocks = <&clk_sysin>; clock-names = "ssc"; clock-frequency = <400000>; pinctrl-names = "default"; @@ -170,7 +170,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mii0>; clock-names = "stmmaceth"; - clocks = <&CLKS_GMAC0_PHY>; + clocks = <&clk_s_a1_ls CLK_GMAC0_PHY>; }; ethernet1: dwmac@fef08000 { @@ -193,18 +193,30 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mii1>; clock-names = "stmmaceth"; - clocks = <&CLKS_ETH1_PHY>; + clocks = <&clk_s_a0_ls CLK_ETH1_PHY>; }; rc: rc@fe518000 { compatible = "st,comms-irb"; reg = <0xfe518000 0x234>; interrupts = <0 203 0>; - clocks = <&CLK_SYSIN>; + clocks = <&clk_sysin>; rx-mode = "infrared"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ir>; resets = <&softreset STIH415_IRB_SOFTRESET>; }; + + keyscan: keyscan@fe4b0000 { + compatible = "st,sti-keyscan"; + status = "disabled"; + reg = <0xfe4b0000 0x2000>; + interrupts = <GIC_SPI 212 IRQ_TYPE_NONE>; + clocks = <&clk_sysin>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_keyscan>; + resets = <&powerdown STIH415_KEYSCAN_POWERDOWN>, + <&softreset STIH415_KEYSCAN_SOFTRESET>; + }; }; }; diff --git a/arch/arm/boot/dts/stih416-b2000.dts b/arch/arm/boot/dts/stih416-b2000.dts index a5eb6ee..488e80a 100644 --- a/arch/arm/boot/dts/stih416-b2000.dts +++ b/arch/arm/boot/dts/stih416-b2000.dts @@ -9,8 +9,7 @@ /dts-v1/; #include "stih416.dtsi" #include "stih41x-b2000.dtsi" - / { - compatible = "st,stih416", "st,stih416-b2000"; model = "STiH416 B2000"; + compatible = "st,stih416-b2000", "st,stih416"; }; diff --git a/arch/arm/boot/dts/stih416-b2020-revE.dts b/arch/arm/boot/dts/stih416-b2020-revE.dts new file mode 100644 index 0000000..ba0fa2c --- /dev/null +++ b/arch/arm/boot/dts/stih416-b2020-revE.dts @@ -0,0 +1,35 @@ +/* + * Copyright (C) 2014 STMicroelectronics (R&D) Limited. + * Author: Lee Jones <lee.jones@linaro.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ +/dts-v1/; +#include "stih416.dtsi" +#include "stih41x-b2020.dtsi" +/ { + model = "STiH416 B2020 REV-E"; + compatible = "st,stih416-b2020", "st,stih416"; + + soc { + leds { + compatible = "gpio-leds"; + red { + #gpio-cells = <1>; + label = "Front Panel LED"; + gpios = <&PIO4 1>; + linux,default-trigger = "heartbeat"; + }; + green { + gpios = <&PIO1 3>; + default-state = "off"; + }; + }; + + ethernet1: dwmac@fef08000 { + snps,reset-gpio = <&PIO0 7>; + }; + }; +}; diff --git a/arch/arm/boot/dts/stih416-b2020.dts b/arch/arm/boot/dts/stih416-b2020.dts index 276f28d..4e2df66 100644 --- a/arch/arm/boot/dts/stih416-b2020.dts +++ b/arch/arm/boot/dts/stih416-b2020.dts @@ -11,6 +11,5 @@ #include "stih41x-b2020.dtsi" / { model = "STiH416 B2020"; - compatible = "st,stih416", "st,stih416-b2020"; - + compatible = "st,stih416-b2020", "st,stih416"; }; diff --git a/arch/arm/boot/dts/stih416-clock.dtsi b/arch/arm/boot/dts/stih416-clock.dtsi index a6942c7..5b4fb83 100644 --- a/arch/arm/boot/dts/stih416-clock.dtsi +++ b/arch/arm/boot/dts/stih416-clock.dtsi @@ -6,50 +6,751 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ + +#include <dt-bindings/clock/stih416-clks.h> + / { clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + /* * Fixed 30MHz oscillator inputs to SoC */ - CLK_SYSIN: CLK_SYSIN { + clk_sysin: clk-sysin { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <30000000>; - clock-output-names = "CLK_SYSIN"; + }; + + /* + * ClockGenAs on SASG2 + */ + clockgen-a@fee62000 { + reg = <0xfee62000 0xb48>; + + clk_s_a0_pll: clk-s-a0-pll { + #clock-cells = <1>; + compatible = "st,clkgena-plls-c65"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-a0-pll0-hs", + "clk-s-a0-pll0-ls", + "clk-s-a0-pll1"; + }; + + clk_s_a0_osc_prediv: clk-s-a0-osc-prediv { + #clock-cells = <0>; + compatible = "st,clkgena-prediv-c65", + "st,clkgena-prediv"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-a0-osc-prediv"; + }; + + clk_s_a0_hs: clk-s-a0-hs { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c65-hs", + "st,clkgena-divmux"; + + clocks = <&clk_s_a0_osc_prediv>, + <&clk_s_a0_pll 0>, /* PLL0 HS */ + <&clk_s_a0_pll 2>; /* PLL1 */ + + clock-output-names = "clk-s-fdma-0", + "clk-s-fdma-1", + ""; /* clk-s-jit-sense */ + /* Fourth output unused */ + }; + + clk_s_a0_ls: clk-s-a0-ls { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c65-ls", + "st,clkgena-divmux"; + + clocks = <&clk_s_a0_osc_prediv>, + <&clk_s_a0_pll 1>, /* PLL0 LS */ + <&clk_s_a0_pll 2>; /* PLL1 */ + + clock-output-names = "clk-s-icn-reg-0", + "clk-s-icn-if-0", + "clk-s-icn-reg-lp-0", + "clk-s-emiss", + "clk-s-eth1-phy", + "clk-s-mii-ref-out"; + /* Remaining outputs unused */ + }; + }; + + clockgen-a@fee81000 { + reg = <0xfee81000 0xb48>; + + clk_s_a1_pll: clk-s-a1-pll { + #clock-cells = <1>; + compatible = "st,clkgena-plls-c65"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-a1-pll0-hs", + "clk-s-a1-pll0-ls", + "clk-s-a1-pll1"; + }; + + clk_s_a1_osc_prediv: clk-s-a1-osc-prediv { + #clock-cells = <0>; + compatible = "st,clkgena-prediv-c65", + "st,clkgena-prediv"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-s-a1-osc-prediv"; + }; + + clk_s_a1_hs: clk-s-a1-hs { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c65-hs", + "st,clkgena-divmux"; + + clocks = <&clk_s_a1_osc_prediv>, + <&clk_s_a1_pll 0>, /* PLL0 HS */ + <&clk_s_a1_pll 2>; /* PLL1 */ + + clock-output-names = "", /* Reserved */ + "", /* Reserved */ + "clk-s-stac-phy", + "clk-s-vtac-tx-phy"; + }; + + clk_s_a1_ls: clk-s-a1-ls { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c65-ls", + "st,clkgena-divmux"; + + clocks = <&clk_s_a1_osc_prediv>, + <&clk_s_a1_pll 1>, /* PLL0 LS */ + <&clk_s_a1_pll 2>; /* PLL1 */ + + clock-output-names = "clk-s-icn-if-2", + "clk-s-card-mmc-0", + "clk-s-icn-if-1", + "clk-s-gmac0-phy", + "clk-s-nand-ctrl", + "", /* Reserved */ + "clk-s-mii0-ref-out", + "clk-s-stac-sys", + "clk-s-card-mmc-1"; + /* Remaining outputs unused */ + }; + }; + + /* + * ClockGenAs on MPE42 + */ + clockgen-a@fde12000 { + reg = <0xfde12000 0xb50>; + + clk_m_a0_pll0: clk-m-a0-pll0 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a0-pll0-phi0", + "clk-m-a0-pll0-phi1", + "clk-m-a0-pll0-phi2", + "clk-m-a0-pll0-phi3"; + }; + + clk_m_a0_pll1: clk-m-a0-pll1 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a0-pll1-phi0", + "clk-m-a0-pll1-phi1", + "clk-m-a0-pll1-phi2", + "clk-m-a0-pll1-phi3"; + }; + + clk_m_a0_osc_prediv: clk-m-a0-osc-prediv { + #clock-cells = <0>; + compatible = "st,clkgena-prediv-c32", + "st,clkgena-prediv"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a0-osc-prediv"; + }; + + clk_m_a0_div0: clk-m-a0-div0 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf0", + "st,clkgena-divmux"; + + clocks = <&clk_m_a0_osc_prediv>, + <&clk_m_a0_pll0 0>, /* PLL0 PHI0 */ + <&clk_m_a0_pll1 0>; /* PLL1 PHI0 */ + + clock-output-names = "", /* Unused */ + "", /* Unused */ + "clk-m-fdma-12", + "", /* Unused */ + "clk-m-pp-dmu-0", + "clk-m-pp-dmu-1", + "clk-m-icm-lmi", + "clk-m-vid-dmu-0"; + }; + + clk_m_a0_div1: clk-m-a0-div1 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf1", + "st,clkgena-divmux"; + + clocks = <&clk_m_a0_osc_prediv>, + <&clk_m_a0_pll0 1>, /* PLL0 PHI1 */ + <&clk_m_a0_pll1 1>; /* PLL1 PHI1 */ + + clock-output-names = "clk-m-vid-dmu-1", + "", /* Unused */ + "clk-m-a9-ext2f", + "clk-m-st40rt", + "clk-m-st231-dmu-0", + "clk-m-st231-dmu-1", + "clk-m-st231-aud", + "clk-m-st231-gp-0"; + }; + + clk_m_a0_div2: clk-m-a0-div2 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf2", + "st,clkgena-divmux"; + + clocks = <&clk_m_a0_osc_prediv>, + <&clk_m_a0_pll0 2>, /* PLL0 PHI2 */ + <&clk_m_a0_pll1 2>; /* PLL1 PHI2 */ + + clock-output-names = "clk-m-st231-gp-1", + "clk-m-icn-cpu", + "clk-m-icn-stac", + "clk-m-tx-icn-dmu-0", + "clk-m-tx-icn-dmu-1", + "clk-m-tx-icn-ts", + "clk-m-icn-vdp-0", + "clk-m-icn-vdp-1"; + }; + + clk_m_a0_div3: clk-m-a0-div3 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf3", + "st,clkgena-divmux"; + + clocks = <&clk_m_a0_osc_prediv>, + <&clk_m_a0_pll0 3>, /* PLL0 PHI3 */ + <&clk_m_a0_pll1 3>; /* PLL1 PHI3 */ + + clock-output-names = "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "clk-m-icn-vp8", + "", /* Unused */ + "clk-m-icn-reg-11", + "clk-m-a9-trace"; + }; + }; + + clockgen-a@fd6db000 { + reg = <0xfd6db000 0xb50>; + + clk_m_a1_pll0: clk-m-a1-pll0 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a1-pll0-phi0", + "clk-m-a1-pll0-phi1", + "clk-m-a1-pll0-phi2", + "clk-m-a1-pll0-phi3"; + }; + + clk_m_a1_pll1: clk-m-a1-pll1 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a1-pll1-phi0", + "clk-m-a1-pll1-phi1", + "clk-m-a1-pll1-phi2", + "clk-m-a1-pll1-phi3"; + }; + + clk_m_a1_osc_prediv: clk-m-a1-osc-prediv { + #clock-cells = <0>; + compatible = "st,clkgena-prediv-c32", + "st,clkgena-prediv"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a1-osc-prediv"; + }; + + clk_m_a1_div0: clk-m-a1-div0 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf0", + "st,clkgena-divmux"; + + clocks = <&clk_m_a1_osc_prediv>, + <&clk_m_a1_pll0 0>, /* PLL0 PHI0 */ + <&clk_m_a1_pll1 0>; /* PLL1 PHI0 */ + + clock-output-names = "", /* Unused */ + "clk-m-fdma-10", + "clk-m-fdma-11", + "clk-m-hva-alt", + "clk-m-proc-sc", + "clk-m-tp", + "clk-m-rx-icn-dmu-0", + "clk-m-rx-icn-dmu-1"; + }; + + clk_m_a1_div1: clk-m-a1-div1 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf1", + "st,clkgena-divmux"; + + clocks = <&clk_m_a1_osc_prediv>, + <&clk_m_a1_pll0 1>, /* PLL0 PHI1 */ + <&clk_m_a1_pll1 1>; /* PLL1 PHI1 */ + + clock-output-names = "clk-m-rx-icn-ts", + "clk-m-rx-icn-vdp-0", + "", /* Unused */ + "clk-m-prv-t1-bus", + "clk-m-icn-reg-12", + "clk-m-icn-reg-10", + "", /* Unused */ + "clk-m-icn-st231"; + }; + + clk_m_a1_div2: clk-m-a1-div2 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf2", + "st,clkgena-divmux"; + + clocks = <&clk_m_a1_osc_prediv>, + <&clk_m_a1_pll0 2>, /* PLL0 PHI2 */ + <&clk_m_a1_pll1 2>; /* PLL1 PHI2 */ + + clock-output-names = "clk-m-fvdp-proc-alt", + "clk-m-icn-reg-13", + "clk-m-tx-icn-gpu", + "clk-m-rx-icn-gpu", + "", /* Unused */ + "", /* Unused */ + "", /* clk-m-apb-pm-12 */ + ""; /* Unused */ + }; + + clk_m_a1_div3: clk-m-a1-div3 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf3", + "st,clkgena-divmux"; + + clocks = <&clk_m_a1_osc_prediv>, + <&clk_m_a1_pll0 3>, /* PLL0 PHI3 */ + <&clk_m_a1_pll1 3>; /* PLL1 PHI3 */ + + clock-output-names = "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + "", /* Unused */ + ""; /* clk-m-gpu-alt */ + }; + }; + + clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&clk_m_a0_div1 2>; + clock-div = <2>; + clock-mult = <1>; + }; + + clockgen-a@fd345000 { + reg = <0xfd345000 0xb50>; + + clk_m_a2_pll0: clk-m-a2-pll0 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-0", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a2-pll0-phi0", + "clk-m-a2-pll0-phi1", + "clk-m-a2-pll0-phi2", + "clk-m-a2-pll0-phi3"; + }; + + clk_m_a2_pll1: clk-m-a2-pll1 { + #clock-cells = <1>; + compatible = "st,plls-c32-a1x-1", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a2-pll1-phi0", + "clk-m-a2-pll1-phi1", + "clk-m-a2-pll1-phi2", + "clk-m-a2-pll1-phi3"; + }; + + clk_m_a2_osc_prediv: clk-m-a2-osc-prediv { + #clock-cells = <0>; + compatible = "st,clkgena-prediv-c32", + "st,clkgena-prediv"; + + clocks = <&clk_sysin>; + + clock-output-names = "clk-m-a2-osc-prediv"; + }; + + clk_m_a2_div0: clk-m-a2-div0 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf0", + "st,clkgena-divmux"; + + clocks = <&clk_m_a2_osc_prediv>, + <&clk_m_a2_pll0 0>, /* PLL0 PHI0 */ + <&clk_m_a2_pll1 0>; /* PLL1 PHI0 */ + + clock-output-names = "clk-m-vtac-main-phy", + "clk-m-vtac-aux-phy", + "clk-m-stac-phy", + "clk-m-stac-sys", + "", /* clk-m-mpestac-pg */ + "", /* clk-m-mpestac-wc */ + "", /* clk-m-mpevtacaux-pg*/ + ""; /* clk-m-mpevtacmain-pg*/ + }; + + clk_m_a2_div1: clk-m-a2-div1 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf1", + "st,clkgena-divmux"; + + clocks = <&clk_m_a2_osc_prediv>, + <&clk_m_a2_pll0 1>, /* PLL0 PHI1 */ + <&clk_m_a2_pll1 1>; /* PLL1 PHI1 */ + + clock-output-names = "", /* clk-m-mpevtacrx0-wc */ + "", /* clk-m-mpevtacrx1-wc */ + "clk-m-compo-main", + "clk-m-compo-aux", + "clk-m-bdisp-0", + "clk-m-bdisp-1", + "clk-m-icn-bdisp", + "clk-m-icn-compo"; + }; + + clk_m_a2_div2: clk-m-a2-div2 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf2", + "st,clkgena-divmux"; + + clocks = <&clk_m_a2_osc_prediv>, + <&clk_m_a2_pll0 2>, /* PLL0 PHI2 */ + <&clk_m_a2_pll1 2>; /* PLL1 PHI2 */ + + clock-output-names = "clk-m-icn-vdp-2", + "", /* Unused */ + "clk-m-icn-reg-14", + "clk-m-mdtp", + "clk-m-jpegdec", + "", /* Unused */ + "clk-m-dcephy-impctrl", + ""; /* Unused */ + }; + + clk_m_a2_div3: clk-m-a2-div3 { + #clock-cells = <1>; + compatible = "st,clkgena-divmux-c32-odf3", + "st,clkgena-divmux"; + + clocks = <&clk_m_a2_osc_prediv>, + <&clk_m_a2_pll0 3>, /* PLL0 PHI3 */ + <&clk_m_a2_pll1 3>; /* PLL1 PHI3 */ + + clock-output-names = "", /* Unused */ + ""; /* clk-m-apb-pm-11 */ + /* Remaining outputs unused */ + }; + }; + + /* + * A9 PLL + */ + clockgen-a9@fdde08b0 { + reg = <0xfdde08b0 0x70>; + + clockgen_a9_pll: clockgen-a9-pll { + #clock-cells = <1>; + compatible = "st,stih416-plls-c32-a9", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + clock-output-names = "clockgen-a9-pll-odf"; + }; + }; + + /* + * ARM CPU related clocks + */ + clk_m_a9: clk-m-a9@fdde08ac { + #clock-cells = <0>; + compatible = "st,stih416-clkgen-a9-mux", "st,clkgen-mux"; + reg = <0xfdde08ac 0x4>; + clocks = <&clockgen_a9_pll 0>, + <&clockgen_a9_pll 0>, + <&clk_m_a0_div1 2>, + <&clk_m_a9_ext2f_div2>; }; /* * ARM Peripheral clock for timers */ - arm_periph_clk: arm_periph_clk { + arm_periph_clk: clk-m-a9-periphs { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <600000000>; + compatible = "fixed-factor-clock"; + clocks = <&clk_m_a9>; + clock-div = <2>; + clock-mult = <1>; }; /* - * Bootloader initialized system infrastructure clock for - * serial devices. + * Frequency synthesizers on the SASG2 */ - CLK_S_ICN_REG_0: clockgenA0@4 { + clockgen_b0: clockgen-b0@fee108b4 { + #clock-cells = <1>; + compatible = "st,stih416-quadfs216", "st,quadfs"; + reg = <0xfee108b4 0x44>; + + clocks = <&clk_sysin>; + clock-output-names = "clk-s-usb48", + "clk-s-dss", + "clk-s-stfe-frc-2", + "clk-s-thsens-scard"; + }; + + clockgen_b1: clockgen-b1@fe8308c4 { + #clock-cells = <1>; + compatible = "st,stih416-quadfs216", "st,quadfs"; + reg = <0xfe8308c4 0x44>; + + clocks = <&clk_sysin>; + clock-output-names = "clk-s-pcm-0", + "clk-s-pcm-1", + "clk-s-pcm-2", + "clk-s-pcm-3"; + }; + + clockgen_c: clockgen-c@fe8307d0 { + #clock-cells = <1>; + compatible = "st,stih416-quadfs432", "st,quadfs"; + reg = <0xfe8307d0 0x44>; + + clocks = <&clk_sysin>; + clock-output-names = "clk-s-c-fs0-ch0", + "clk-s-c-vcc-sd", + "clk-s-c-fs0-ch2"; + }; + + clk_s_vcc_hd: clk-s-vcc-hd@fe8308b8 { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <100000000>; - clock-output-names = "CLK_S_ICN_REG_0"; + compatible = "st,stih416-clkgenc-vcc-hd", "st,clkgen-mux"; + reg = <0xfe8308b8 0x4>; /* SYSCFG2558 */ + + clocks = <&clk_sysin>, + <&clockgen_c 0>; }; - CLK_S_GMAC0_PHY: clockgenA1@7 { + /* + * Add a dummy clock for the HDMI PHY for the VCC input mux + */ + clk_s_tmds_fromphy: clk-s-tmds-fromphy { #clock-cells = <0>; compatible = "fixed-clock"; - clock-frequency = <25000000>; - clock-output-names = "CLK_S_GMAC0_PHY"; + clock-frequency = <0>; + }; + + clockgen_c_vcc: clockgen-c-vcc@fe8308ac { + #clock-cells = <1>; + compatible = "st,stih416-clkgenc", "st,clkgen-vcc"; + reg = <0xfe8308ac 0xc>; /* SYSCFG2555,2556,2557 */ + + clocks = <&clk_s_vcc_hd>, + <&clockgen_c 1>, + <&clk_s_tmds_fromphy>, + <&clockgen_c 2>; + + clock-output-names = "clk-s-pix-hdmi", + "clk-s-pix-dvo", + "clk-s-out-dvo", + "clk-s-pix-hd", + "clk-s-hddac", + "clk-s-denc", + "clk-s-sddac", + "clk-s-pix-main", + "clk-s-pix-aux", + "clk-s-stfe-frc-0", + "clk-s-ref-mcru", + "clk-s-slave-mcru", + "clk-s-tmds-hdmi", + "clk-s-hdmi-reject-pll", + "clk-s-thsens"; }; - CLK_S_ETH1_PHY: clockgenA0@7 { + clockgen_d: clockgen-d@fee107e0 { + #clock-cells = <1>; + compatible = "st,stih416-quadfs216", "st,quadfs"; + reg = <0xfee107e0 0x44>; + + clocks = <&clk_sysin>; + clock-output-names = "clk-s-ccsc", + "clk-s-stfe-frc-1", + "clk-s-tsout-1", + "clk-s-mchi"; + }; + + /* + * Frequency synthesizers on the MPE42 + */ + clockgen_e: clockgen-e@fd3208bc { + #clock-cells = <1>; + compatible = "st,stih416-quadfs660-E", "st,quadfs"; + reg = <0xfd3208bc 0xb0>; + + clocks = <&clk_sysin>; + clock-output-names = "clk-m-pix-mdtp-0", + "clk-m-pix-mdtp-1", + "clk-m-pix-mdtp-2", + "clk-m-mpelpc"; + }; + + clockgen_f: clockgen-f@fd320878 { + #clock-cells = <1>; + compatible = "st,stih416-quadfs660-F", "st,quadfs"; + reg = <0xfd320878 0xf0>; + + clocks = <&clk_sysin>; + clock-output-names = "clk-m-main-vidfs", + "clk-m-hva-fs", + "clk-m-fvdp-vcpu", + "clk-m-fvdp-proc-fs"; + }; + + clk_m_fvdp_proc: clk-m-fvdp-proc@fd320910 { + #clock-cells = <0>; + compatible = "st,stih416-clkgenf-vcc-fvdp", "st,clkgen-mux"; + reg = <0xfd320910 0x4>; /* SYSCFG8580 */ + + clocks = <&clk_m_a1_div2 0>, + <&clockgen_f 3>; + }; + + clk_m_hva: clk-m-hva@fd690868 { + #clock-cells = <0>; + compatible = "st,stih416-clkgenf-vcc-hva", "st,clkgen-mux"; + reg = <0xfd690868 0x4>; /* SYSCFG9538 */ + + clocks = <&clockgen_f 1>, + <&clk_m_a1_div0 3>; + }; + + clk_m_f_vcc_hd: clk-m-f-vcc-hd@fd32086c { + #clock-cells = <0>; + compatible = "st,stih416-clkgenf-vcc-hd", "st,clkgen-mux"; + reg = <0xfd32086c 0x4>; /* SYSCFG8539 */ + + clocks = <&clockgen_c_vcc 7>, + <&clockgen_f 0>; + }; + + clk_m_f_vcc_sd: clk-m-f-vcc-sd@fd32086c { + #clock-cells = <0>; + compatible = "st,stih416-clkgenf-vcc-sd", "st,clkgen-mux"; + reg = <0xfd32086c 0x4>; /* SYSCFG8539 */ + + clocks = <&clockgen_c_vcc 8>, + <&clockgen_f 1>; + }; + + /* + * Add a dummy clock for the HDMIRx external signal clock + */ + clk_m_pix_hdmirx_sas: clk-m-pix-hdmirx-sas { #clock-cells = <0>; compatible = "fixed-clock"; - clock-frequency = <25000000>; - clock-output-names = "CLK_S_ETH1_PHY"; + clock-frequency = <0>; + }; + + clockgen_f_vcc: clockgen-f-vcc@fd32086c { + #clock-cells = <1>; + compatible = "st,stih416-clkgenf", "st,clkgen-vcc"; + reg = <0xfd32086c 0xc>; /* SYSCFG8539,8540,8541 */ + + clocks = <&clk_m_f_vcc_hd>, + <&clk_m_f_vcc_sd>, + <&clockgen_f 0>, + <&clk_m_pix_hdmirx_sas>; + + clock-output-names = "clk-m-pix-main-pipe", + "clk-m-pix-aux-pipe", + "clk-m-pix-main-cru", + "clk-m-pix-aux-cru", + "clk-m-xfer-be-compo", + "clk-m-xfer-pip-compo", + "clk-m-xfer-aux-compo", + "clk-m-vsens", + "clk-m-pix-hdmirx-0", + "clk-m-pix-hdmirx-1"; + }; + + /* + * DDR PLL + */ + clockgen-ddr@0xfdde07d8 { + reg = <0xfdde07d8 0x110>; + + clockgen_ddr_pll: clockgen-ddr-pll { + #clock-cells = <1>; + compatible = "st,stih416-plls-c32-ddr", "st,clkgen-plls-c32"; + + clocks = <&clk_sysin>; + clock-output-names = "clockgen-ddr0", + "clockgen-ddr1"; + }; + }; + + /* + * GPU PLL + */ + clockgen-gpu@fd68ff00 { + reg = <0xfd68ff00 0x910>; + + clockgen_gpu_pll: clockgen-gpu-pll { + #clock-cells = <1>; + compatible = "st,stih416-gpu-pll-c32", "st,clkgengpu-pll-c32"; + + clocks = <&clk_sysin>; + clock-output-names = "clockgen-gpu-pll"; + }; }; }; }; diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi index 250d5ec..ee6c119 100644 --- a/arch/arm/boot/dts/stih416-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi @@ -122,6 +122,22 @@ }; }; + keyscan { + pinctrl_keyscan: keyscan { + st,pins { + keyin0 = <&PIO0 2 ALT2 IN>; + keyin1 = <&PIO0 3 ALT2 IN>; + keyin2 = <&PIO0 4 ALT2 IN>; + keyin3 = <&PIO2 6 ALT2 IN>; + + keyout0 = <&PIO1 6 ALT2 OUT>; + keyout1 = <&PIO1 7 ALT2 OUT>; + keyout2 = <&PIO0 6 ALT2 OUT>; + keyout3 = <&PIO2 7 ALT2 OUT>; + }; + }; + }; + sbc_i2c0 { pinctrl_sbc_i2c0_default: sbc_i2c0-default { st,pins { diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi index 78746d2..06473c5 100644 --- a/arch/arm/boot/dts/stih416.dtsi +++ b/arch/arm/boot/dts/stih416.dtsi @@ -89,7 +89,7 @@ status = "disabled"; reg = <0xfed32000 0x2c>; interrupts = <0 197 0>; - clocks = <&CLK_S_ICN_REG_0>; + clocks = <&clk_s_a0_ls CLK_ICN_REG>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_serial2 &pinctrl_serial2_oe>; }; @@ -102,14 +102,14 @@ interrupts = <0 210 0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sbc_serial1>; - clocks = <&CLK_SYSIN>; + clocks = <&clk_sysin>; }; i2c@fed40000 { compatible = "st,comms-ssc4-i2c"; reg = <0xfed40000 0x110>; interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CLK_S_ICN_REG_0>; + clocks = <&clk_s_a0_ls CLK_ICN_REG>; clock-names = "ssc"; clock-frequency = <400000>; pinctrl-names = "default"; @@ -122,7 +122,7 @@ compatible = "st,comms-ssc4-i2c"; reg = <0xfed41000 0x110>; interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CLK_S_ICN_REG_0>; + clocks = <&clk_s_a0_ls CLK_ICN_REG>; clock-names = "ssc"; clock-frequency = <400000>; pinctrl-names = "default"; @@ -135,7 +135,7 @@ compatible = "st,comms-ssc4-i2c"; reg = <0xfe540000 0x110>; interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CLK_SYSIN>; + clocks = <&clk_sysin>; clock-names = "ssc"; clock-frequency = <400000>; pinctrl-names = "default"; @@ -148,7 +148,7 @@ compatible = "st,comms-ssc4-i2c"; reg = <0xfe541000 0x110>; interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&CLK_SYSIN>; + clocks = <&clk_sysin>; clock-names = "ssc"; clock-frequency = <400000>; pinctrl-names = "default"; @@ -176,7 +176,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mii0>; clock-names = "stmmaceth"; - clocks = <&CLK_S_GMAC0_PHY>; + clocks = <&clk_s_a1_ls CLK_GMAC0_PHY>; }; ethernet1: dwmac@fef08000 { @@ -198,7 +198,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mii1>; clock-names = "stmmaceth"; - clocks = <&CLK_S_ETH1_PHY>; + clocks = <&clk_s_a0_ls CLK_ETH1_PHY>; }; rc: rc@fe518000 { @@ -206,7 +206,7 @@ reg = <0xfe518000 0x234>; interrupts = <0 203 0>; rx-mode = "infrared"; - clocks = <&CLK_SYSIN>; + clocks = <&clk_sysin>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ir>; resets = <&softreset STIH416_IRB_SOFTRESET>; @@ -224,5 +224,17 @@ status = "disabled"; }; + + keyscan: keyscan@fe4b0000 { + compatible = "st,sti-keyscan"; + status = "disabled"; + reg = <0xfe4b0000 0x2000>; + interrupts = <GIC_SPI 212 IRQ_TYPE_NONE>; + clocks = <&clk_sysin>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_keyscan>; + resets = <&powerdown STIH416_KEYSCAN_POWERDOWN>, + <&softreset STIH416_KEYSCAN_SOFTRESET>; + }; }; }; diff --git a/arch/arm/boot/dts/stih41x-b2000.dtsi b/arch/arm/boot/dts/stih41x-b2000.dtsi index bf65c49..b3dd6ca 100644 --- a/arch/arm/boot/dts/stih41x-b2000.dtsi +++ b/arch/arm/boot/dts/stih41x-b2000.dtsi @@ -6,6 +6,7 @@ * it under the terms of the GNU General Public License version 2 as * publishhed by the Free Software Foundation. */ +#include <dt-bindings/input/input.h> / { memory{ @@ -14,7 +15,7 @@ }; chosen { - bootargs = "console=ttyAS0,115200"; + bootargs = "console=ttyAS0,115200 clk_ignore_unused"; linux,stdout-path = &serial2; }; @@ -68,5 +69,27 @@ snps,reset-active-low; snps,reset-delays-us = <0 10000 10000>; }; + + keyscan: keyscan@fe4b0000 { + keypad,num-rows = <4>; + keypad,num-columns = <4>; + st,debounce-us = <5000>; + linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_F13) + MATRIX_KEY(0x00, 0x01, KEY_F9) + MATRIX_KEY(0x00, 0x02, KEY_F5) + MATRIX_KEY(0x00, 0x03, KEY_F1) + MATRIX_KEY(0x01, 0x00, KEY_F14) + MATRIX_KEY(0x01, 0x01, KEY_F10) + MATRIX_KEY(0x01, 0x02, KEY_F6) + MATRIX_KEY(0x01, 0x03, KEY_F2) + MATRIX_KEY(0x02, 0x00, KEY_F15) + MATRIX_KEY(0x02, 0x01, KEY_F11) + MATRIX_KEY(0x02, 0x02, KEY_F7) + MATRIX_KEY(0x02, 0x03, KEY_F3) + MATRIX_KEY(0x03, 0x00, KEY_F16) + MATRIX_KEY(0x03, 0x01, KEY_F12) + MATRIX_KEY(0x03, 0x02, KEY_F8) + MATRIX_KEY(0x03, 0x03, KEY_F4) >; + }; }; }; diff --git a/arch/arm/boot/dts/stih41x-b2020.dtsi b/arch/arm/boot/dts/stih41x-b2020.dtsi index 838513f..d8a8429 100644 --- a/arch/arm/boot/dts/stih41x-b2020.dtsi +++ b/arch/arm/boot/dts/stih41x-b2020.dtsi @@ -14,7 +14,7 @@ }; chosen { - bootargs = "console=ttyAS0,115200"; + bootargs = "console=ttyAS0,115200 clk_ignore_unused"; linux,stdout-path = &sbc_serial1; }; diff --git a/arch/arm/boot/dts/stih41x.dtsi b/arch/arm/boot/dts/stih41x.dtsi index f5b9898..5cb0e63 100644 --- a/arch/arm/boot/dts/stih41x.dtsi +++ b/arch/arm/boot/dts/stih41x.dtsi @@ -1,3 +1,10 @@ +/* + * Copyright (C) 2014 STMicroelectronics Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ / { #address-cells = <1>; #size-cells = <1>; |