Merge tag 'tegra-for-4.3-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt

ARM: tegra: Devicetree changes for v4.3-rc1

Enables CPU frequency scaling on Jetson TK1 and enables the GK20A GPU on
Venice2 and Jetson TK1. This also enables support for the PMU hardware
found on Tegra124, which among other things, can be used for performance
measurements.

* tag 'tegra-for-4.3-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: Add gpio-ranges property
  ARM: tegra: Fix AHB base address on Tegra20, Tegra30 and Tegra114
  ARM: tegra: Add Tegra124 PMU support
  ARM: tegra: jetson-tk1: Add GK20A GPU DT node
  ARM: tegra: venice2: Add GK20A GPU DT node
  ARM: tegra: Add IOMMU node to GK20A
  ARM: tegra: Add CPU regulator to the Jetson TK1 device tree
  ARM: tegra: Add entries for cpufreq on Tegra124
  ARM: tegra: Enable the DFLL on the Jetson TK1
  ARM: tegra: Add the DFLL to Tegra124 device tree
  pinctrl: tegra: Only set the gpio range if needed
  clk: tegra: Add the DFLL as a possible parent of the cclk_g clock
  clk: tegra: Save/restore CCLKG_BURST_POLICY on suspend
  clk: tegra: Add Tegra124 DFLL clocksource platform driver
  clk: tegra: Add DFLL DVCO reset control for Tegra124
  clk: tegra: Introduce ability for SoC-specific reset control callbacks
  clk: tegra: Add functions for parsing CVB tables
  clk: tegra: Add closed loop support for the DFLL
  clk: tegra: Add library for the DFLL clock source (open-loop mode)
  clk: tegra: Add binding for the Tegra124 DFLL clocksource

Signed-off-by: Olof Johansson <olof@lixom.net>

6 files changed, 91 insertions, 9 deletions

diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi
index f58a3d9..9d4f86e 100644
--- a/arch/arm/boot/dts/tegra114.dtsi
+++ b/arch/arm/boot/dts/tegra114.dtsi
@@ -214,9 +214,9 @@
 		#dma-cells = <1>;
 	};
 
-	ahb: ahb@6000c004 {
+	ahb: ahb@6000c000 {
 		compatible = "nvidia,tegra114-ahb", "nvidia,tegra30-ahb";
-		reg = <0x6000c004 0x14c>;
+		reg = <0x6000c000 0x150>;
 	};
 
 	gpio: gpio@6000d000 {
@@ -234,6 +234,7 @@
 		gpio-controller;
 		#interrupt-cells = <2>;
 		interrupt-controller;
+		gpio-ranges = <&pinmux 0 0 246>;
 	};
 
 	apbmisc@70000800 {
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index bd43ed6..66b4451 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -53,6 +53,14 @@
 		};
 	};
 
+	gpu@0,57000000 {
+		/*
+		 * Node left disabled on purpose - the bootloader will enable
+		 * it after having set the VPR up
+		 */
+		vdd-supply = <&vdd_gpu>;
+	};
+
 	pinmux: pinmux@0,70000868 {
 		pinctrl-names = "boot";
 		pinctrl-0 = <&state_boot>;
@@ -1462,7 +1470,7 @@
 				vin-ldo9-10-supply = <&vdd_5v0_sys>;
 				vin-ldo11-supply = <&vdd_3v3_run>;
 
-				sd0 {
+				vdd_cpu: sd0 {
 					regulator-name = "+VDD_CPU_AP";
 					regulator-min-microvolt = <700000>;
 					regulator-max-microvolt = <1400000>;
@@ -1514,7 +1522,7 @@
 					regulator-always-on;
 				};
 
-				sd6 {
+				vdd_gpu: sd6 {
 					regulator-name = "+VDD_GPU_AP";
 					regulator-min-microvolt = <650000>;
 					regulator-max-microvolt = <1200000>;
@@ -1694,6 +1702,13 @@
 		non-removable;
 	};
 
+	/* CPU DFLL clock */
+	clock@0,70110000 {
+		status = "okay";
+		vdd-cpu-supply = <&vdd_cpu>;
+		nvidia,i2c-fs-rate = <400000>;
+	};
+
 	ahub@0,70300000 {
 		i2s@0,70301100 {
 			status = "okay";
@@ -1732,6 +1747,12 @@
 		};
 	};
 
+	cpus {
+		cpu@0 {
+			vdd-cpu-supply = <&vdd_cpu>;
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts
index 79e724b..cfbdf42 100644
--- a/arch/arm/boot/dts/tegra124-venice2.dts
+++ b/arch/arm/boot/dts/tegra124-venice2.dts
@@ -43,6 +43,14 @@
 		};
 	};
 
+	gpu@0,57000000 {
+		/*
+		 * Node left disabled on purpose - the bootloader will enable
+		 * it after having set the VPR up
+		 */
+		vdd-supply = <&vdd_gpu>;
+	};
+
 	pinmux: pinmux@0,70000868 {
 		pinctrl-names = "boot";
 		pinctrl-0 = <&pinmux_boot>;
@@ -735,7 +743,7 @@
 					regulator-always-on;
 				};
 
-				sd6 {
+				vdd_gpu: sd6 {
 					regulator-name = "+VDD_GPU_AP";
 					regulator-min-microvolt = <650000>;
 					regulator-max-microvolt = <1200000>;
diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index 01a9f74..1e204a6 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -4,6 +4,7 @@
 #include <dt-bindings/pinctrl/pinctrl-tegra.h>
 #include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/tegra124-car.h>
 #include <dt-bindings/thermal/tegra124-soctherm.h>
 
 #include "skeleton.dtsi"
@@ -188,6 +189,9 @@
 		clock-names = "gpu", "pwr";
 		resets = <&tegra_car 184>;
 		reset-names = "gpu";
+
+		iommus = <&mc TEGRA_SWGROUP_GPU>;
+
 		status = "disabled";
 	};
 
@@ -254,6 +258,7 @@
 		gpio-controller;
 		#interrupt-cells = <2>;
 		interrupt-controller;
+		gpio-ranges = <&pinmux 0 0 251>;
 	};
 
 	apbdma: dma@0,60020000 {
@@ -702,6 +707,30 @@
 		#thermal-sensor-cells = <1>;
 	};
 
+	dfll: clock@0,70110000 {
+		compatible = "nvidia,tegra124-dfll";
+		reg = <0 0x70110000 0 0x100>, /* DFLL control */
+		      <0 0x70110000 0 0x100>, /* I2C output control */
+		      <0 0x70110100 0 0x100>, /* Integrated I2C controller */
+		      <0 0x70110200 0 0x100>; /* Look-up table RAM */
+		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_DFLL_SOC>,
+			 <&tegra_car TEGRA124_CLK_DFLL_REF>,
+			 <&tegra_car TEGRA124_CLK_I2C5>;
+		clock-names = "soc", "ref", "i2c";
+		resets = <&tegra_car TEGRA124_RST_DFLL_DVCO>;
+		reset-names = "dvco";
+		#clock-cells = <0>;
+		clock-output-names = "dfllCPU_out";
+		nvidia,sample-rate = <12500>;
+		nvidia,droop-ctrl = <0x00000f00>;
+		nvidia,force-mode = <1>;
+		nvidia,cf = <10>;
+		nvidia,ci = <0>;
+		nvidia,cg = <2>;
+		status = "disabled";
+	};
+
 	ahub@0,70300000 {
 		compatible = "nvidia,tegra124-ahub";
 		reg = <0x0 0x70300000 0x0 0x200>,
@@ -922,6 +951,15 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0>;
+
+			clocks = <&tegra_car TEGRA124_CLK_CCLK_G>,
+				 <&tegra_car TEGRA124_CLK_CCLK_LP>,
+				 <&tegra_car TEGRA124_CLK_PLL_X>,
+				 <&tegra_car TEGRA124_CLK_PLL_P>,
+				 <&dfll>;
+			clock-names = "cpu_g", "cpu_lp", "pll_x", "pll_p", "dfll";
+			/* FIXME: what's the actual transition time? */
+			clock-latency = <300000>;
 		};
 
 		cpu@1 {
@@ -943,6 +981,18 @@
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&{/cpus/cpu@0}>,
+				     <&{/cpus/cpu@1}>,
+				     <&{/cpus/cpu@2}>,
+				     <&{/cpus/cpu@3}>;
+	};
+
 	thermal-zones {
 		cpu {
 			polling-delay-passive = <1000>;
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index f444b67..e058709 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -225,9 +225,9 @@
 		#dma-cells = <1>;
 	};
 
-	ahb@6000c004 {
+	ahb@6000c000 {
 		compatible = "nvidia,tegra20-ahb";
-		reg = <0x6000c004 0x10c>; /* AHB Arbitration + Gizmo Controller */
+		reg = <0x6000c000 0x110>; /* AHB Arbitration + Gizmo Controller */
 	};
 
 	gpio: gpio@6000d000 {
@@ -244,6 +244,7 @@
 		gpio-controller;
 		#interrupt-cells = <2>;
 		interrupt-controller;
+		gpio-ranges = <&pinmux 0 0 224>;
 	};
 
 	apbmisc@70000800 {
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 782b11b..fe04fb5 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -329,9 +329,9 @@
 		#dma-cells = <1>;
 	};
 
-	ahb: ahb@6000c004 {
+	ahb: ahb@6000c000 {
 		compatible = "nvidia,tegra30-ahb";
-		reg = <0x6000c004 0x14c>; /* AHB Arbitration + Gizmo Controller */
+		reg = <0x6000c000 0x150>; /* AHB Arbitration + Gizmo Controller */
 	};
 
 	gpio: gpio@6000d000 {
@@ -349,6 +349,7 @@
 		gpio-controller;
 		#interrupt-cells = <2>;
 		interrupt-controller;
+		gpio-ranges = <&pinmux 0 0 248>;
 	};
 
 	apbmisc@70000800 {