Merge branch 'for-linus' into for-3.18/core

Moving patches from for-linus to 3.18 instead, pull in this changes
that will go to Linus today.

9 files changed, 48 insertions, 25 deletions

diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 9b3d2ba..8689949 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -804,7 +804,7 @@
 
 			usb1: usb@48390000 {
 				compatible = "synopsys,dwc3";
-				reg = <0x48390000 0x17000>;
+				reg = <0x48390000 0x10000>;
 				interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&usb2_phy1>;
 				phy-names = "usb2-phy";
@@ -826,7 +826,7 @@
 
 			usb2: usb@483d0000 {
 				compatible = "synopsys,dwc3";
-				reg = <0x483d0000 0x17000>;
+				reg = <0x483d0000 0x10000>;
 				interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&usb2_phy2>;
 				phy-names = "usb2-phy";
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 646a6ea..e7ac47f 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -260,7 +260,7 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins>;
-	clock-frequency = <400000>;
+	clock-frequency = <100000>;
 
 	tps65218: tps65218@24 {
 		reg = <0x24>;
@@ -424,7 +424,7 @@
 	ranges = <0 0 0 0x01000000>;	/* minimum GPMC partition = 16MB */
 	nand@0,0 {
 		reg = <0 0 4>;		/* device IO registers */
-		ti,nand-ecc-opt = "bch8";
+		ti,nand-ecc-opt = "bch16";
 		ti,elm-id = <&elm>;
 		nand-bus-width = <8>;
 		gpmc,device-width = <1>;
@@ -443,8 +443,6 @@
 		gpmc,rd-cycle-ns = <40>;
 		gpmc,wr-cycle-ns = <40>;
 		gpmc,wait-pin = <0>;
-		gpmc,wait-on-read;
-		gpmc,wait-on-write;
 		gpmc,bus-turnaround-ns = <0>;
 		gpmc,cycle2cycle-delay-ns = <0>;
 		gpmc,clk-activation-ns = <0>;
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index ed7dd239..ac3e485 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -435,13 +435,13 @@
 };
 
 &gpmc {
-	status = "okay";
+	status = "okay";	/* Disable QSPI when enabling GPMC (NAND) */
 	pinctrl-names = "default";
 	pinctrl-0 = <&nand_flash_x8>;
 	ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
 	nand@0,0 {
 		reg = <0 0 0>; /* CS0, offset 0 */
-		ti,nand-ecc-opt = "bch8";
+		ti,nand-ecc-opt = "bch16";
 		ti,elm-id = <&elm>;
 		nand-bus-width = <8>;
 		gpmc,device-width = <1>;
@@ -459,8 +459,7 @@
 		gpmc,access-ns = <30>; /* tCEA + 4*/
 		gpmc,rd-cycle-ns = <40>;
 		gpmc,wr-cycle-ns = <40>;
-		gpmc,wait-on-read = "true";
-		gpmc,wait-on-write = "true";
+		gpmc,wait-pin = <0>;
 		gpmc,bus-turnaround-ns = <0>;
 		gpmc,cycle2cycle-delay-ns = <0>;
 		gpmc,clk-activation-ns = <0>;
@@ -557,7 +556,7 @@
 };
 
 &qspi {
-	status = "okay";
+	status = "disabled";	/* Disable GPMC (NAND) when enabling QSPI */
 	pinctrl-names = "default";
 	pinctrl-0 = <&qspi1_default>;
 
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
index 65ccf56..6c97d4a 100644
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -149,7 +149,7 @@
 				usb: usbck {
 					compatible = "atmel,at91rm9200-clk-usb";
 					#clock-cells = <0>;
-					atmel,clk-divisors = <1 2>;
+					atmel,clk-divisors = <1 2 0 0>;
 					clocks = <&pllb>;
 				};
 
diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi
index 31f7652..4e0abbd 100644
--- a/arch/arm/boot/dts/at91sam9g20.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20.dtsi
@@ -40,6 +40,7 @@
 				};
 
 				pllb: pllbck {
+					compatible = "atmel,at91sam9g20-clk-pllb";
 					atmel,clk-input-range = <2000000 32000000>;
 					atmel,pll-clk-output-ranges = <30000000 100000000 0 0>;
 				};
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 50f8022..e03fbf3 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -8,6 +8,7 @@
 /dts-v1/;
 
 #include "dra74x.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "TI DRA742";
@@ -24,9 +25,29 @@
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
+
+	vtt_fixed: fixedregulator-vtt {
+		compatible = "regulator-fixed";
+		regulator-name = "vtt_fixed";
+		regulator-min-microvolt = <1350000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &dra7_pmx_core {
+	pinctrl-names = "default";
+	pinctrl-0 = <&vtt_pin>;
+
+	vtt_pin: pinmux_vtt_pin {
+		pinctrl-single,pins = <
+			0x3b4 (PIN_OUTPUT | MUX_MODE14) /* spi1_cs1.gpio7_11 */
+		>;
+	};
+
 	i2c1_pins: pinmux_i2c1_pins {
 		pinctrl-single,pins = <
 			0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda */
@@ -43,20 +64,19 @@
 
 	i2c3_pins: pinmux_i2c3_pins {
 		pinctrl-single,pins = <
-			0x410 (PIN_INPUT | MUX_MODE0) /* i2c3_sda */
-			0x414 (PIN_INPUT | MUX_MODE0) /* i2c3_scl */
+			0x288 (PIN_INPUT | MUX_MODE9) /* gpio6_14.i2c3_sda */
+			0x28c (PIN_INPUT | MUX_MODE9) /* gpio6_15.i2c3_scl */
 		>;
 	};
 
 	mcspi1_pins: pinmux_mcspi1_pins {
 		pinctrl-single,pins = <
-			0x3a4 (PIN_INPUT | MUX_MODE0) /* spi2_clk */
-			0x3a8 (PIN_INPUT | MUX_MODE0) /* spi2_d1 */
-			0x3ac (PIN_INPUT | MUX_MODE0) /* spi2_d0 */
-			0x3b0 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */
-			0x3b4 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs1 */
-			0x3b8 (PIN_INPUT_SLEW | MUX_MODE6) /* spi2_cs2 */
-			0x3bc (PIN_INPUT_SLEW | MUX_MODE6) /* spi2_cs3 */
+			0x3a4 (PIN_INPUT | MUX_MODE0) /* spi1_sclk */
+			0x3a8 (PIN_INPUT | MUX_MODE0) /* spi1_d1 */
+			0x3ac (PIN_INPUT | MUX_MODE0) /* spi1_d0 */
+			0x3b0 (PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs0 */
+			0x3b8 (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs2.hdmi1_hpd */
+			0x3bc (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs3.hdmi1_cec */
 		>;
 	};
 
@@ -284,7 +304,7 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c3_pins>;
-	clock-frequency = <3400000>;
+	clock-frequency = <400000>;
 };
 
 &mcspi1 {
@@ -483,7 +503,7 @@
 			reg = <0x001c0000 0x00020000>;
 		};
 		partition@7 {
-			label = "NAND.u-boot-env";
+			label = "NAND.u-boot-env.backup1";
 			reg = <0x001e0000 0x00020000>;
 		};
 		partition@8 {
@@ -504,3 +524,8 @@
 &usb2_phy2 {
 	phy-supply = <&ldousb_reg>;
 };
+
+&gpio7 {
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 1fe45d1..4361777 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -93,7 +93,7 @@
 	};
 
 	tv: connector {
-		compatible = "composite-connector";
+		compatible = "composite-video-connector";
 		label = "tv";
 
 		port {
diff --git a/arch/arm/boot/dts/omap3xxx-clocks.dtsi b/arch/arm/boot/dts/omap3xxx-clocks.dtsi
index e47ff69..5c37500 100644
--- a/arch/arm/boot/dts/omap3xxx-clocks.dtsi
+++ b/arch/arm/boot/dts/omap3xxx-clocks.dtsi
@@ -467,6 +467,7 @@
 		ti,bit-shift = <0x1e>;
 		reg = <0x0d00>;
 		ti,set-bit-to-disable;
+		ti,set-rate-parent;
 	};
 
 	dpll4_m6_ck: dpll4_m6_ck {
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index 4a2000c..3e97a66 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -116,7 +116,6 @@
 		msp2: msp@80117000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&msp2_default_mode>;
-			status = "okay";
 		};
 
 		msp3: msp@80125000 {