Merge branch 'mxs/dt-for-3.6' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt

From Shawn Guo <shawn.guo@linaro.org>:

Here is the second (last) batch of mxs mxs device tree changes for 3.6.

* 'mxs/dt-for-3.6' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: dts: imx28-evk: add usb devices
  ARM: mxs: rename dts files with soc name being the prefix
  ARM: apx4devkit: add pin muxing for GPIOs
  ARM: apx4devkit: remove AUART3
  ARM: apx4devkit: add SSP2 support
  ARM: apx4devkit: fix the bus-width of SSP0 to 4 bits
  ARM: apx4devkit: add display support
  ARM: apx4devkit: add NAND support
  ARM: mxs: add dtb-y target into Makefile.boot
  ARM: mxs: convert stmp378x_devb board to device tree
  ARM: mxs: convert tx28 board to device tree
  ARM: mxs: convert apx4devkit board to device tree
  ARM: mxs: convert m28evk board to device tree
  ARM: dts: imx28: move lcdif control pins into board dts
  ARM: dts: imx28: move extra gpmi-nand pins into board dts

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

7 files changed, 739 insertions, 10 deletions

diff --git a/arch/arm/boot/dts/imx23-stmp378x_devb.dts b/arch/arm/boot/dts/imx23-stmp378x_devb.dts
new file mode 100644
index 0000000..757a327f
--- /dev/null
+++ b/arch/arm/boot/dts/imx23-stmp378x_devb.dts
@@ -0,0 +1,78 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx23.dtsi"
+
+/ {
+	model = "Freescale STMP378x Development Board";
+	compatible = "fsl,stmp378x-devb", "fsl,imx23";
+
+	memory {
+		reg = <0x40000000 0x04000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			ssp0: ssp@80010000 {
+				compatible = "fsl,imx23-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
+				bus-width = <4>;
+				wp-gpios = <&gpio1 30 0>;
+				vmmc-supply = <&reg_vddio_sd0>;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog-gpios@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */
+						0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+			};
+		};
+
+		apbx@80040000 {
+			auart0: serial@8006c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart0_pins_a>;
+				status = "okay";
+			};
+
+			duart: serial@80070000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_vddio_sd0: vddio-sd0 {
+			compatible = "regulator-fixed";
+			regulator-name = "vddio-sd0";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio1 29 0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts
new file mode 100644
index 0000000..b383417
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-apx4devkit.dts
@@ -0,0 +1,198 @@
+/dts-v1/;
+/include/ "imx28.dtsi"
+
+/ {
+	model = "Bluegiga APX4 Development Kit";
+	compatible = "bluegiga,apx4devkit", "fsl,imx28";
+
+	memory {
+		reg = <0x40000000 0x04000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			gpmi-nand@8000c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+				status = "okay";
+			};
+
+			ssp0: ssp@80010000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>;
+				bus-width = <4>;
+				status = "okay";
+			};
+
+			ssp2: ssp@80014000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>;
+				bus-width = <4>;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog-gpios@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */
+						0x0153 /* MX28_PAD_GPMI_RDY1__GPIO_0_21 */
+						0x2123 /* MX28_PAD_SSP2_MISO__GPIO_2_18 */
+						0x2131 /* MX28_PAD_SSP2_SS0__GPIO_2_19 */
+						0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
+						0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
+						0x4143 /* MX28_PAD_JTAG_RTCK__GPIO_4_20 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				lcdif_pins_apx4: lcdif-apx4@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
+						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
+						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
+						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x2041 /* MX28_PAD_SSP0_DATA4__SSP2_D0 */
+						0x2051 /* MX28_PAD_SSP0_DATA5__SSP2_D3 */
+						0x2061 /* MX28_PAD_SSP0_DATA6__SSP2_CMD */
+						0x2071 /* MX28_PAD_SSP0_DATA7__SSP2_SCK */
+						0x2141 /* MX28_PAD_SSP2_SS1__SSP2_D1 */
+						0x2151 /* MX28_PAD_SSP2_SS2__SSP2_D2 */
+					>;
+					fsl,drive-strength = <1>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
+
+				mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4 {
+					fsl,pinmux-ids = <
+						0x2071 /* MX28_PAD_SSP0_DATA7__SSP2_SCK */
+					>;
+					fsl,drive-strength = <2>;
+					fsl,pull-up = <0>;
+				};
+			};
+
+			lcdif@80030000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&lcdif_24bit_pins_a
+					     &lcdif_pins_apx4>;
+				status = "okay";
+			};
+		};
+
+		apbx@80040000 {
+			saif0: saif@80042000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&saif0_pins_a>;
+				status = "okay";
+			};
+
+			saif1: saif@80046000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&saif1_pins_a>;
+				fsl,saif-master = <&saif0>;
+				status = "okay";
+			};
+
+			i2c0: i2c@80058000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins_a>;
+				status = "okay";
+
+				sgtl5000: codec@0a {
+					compatible = "fsl,sgtl5000";
+					reg = <0x0a>;
+					VDDA-supply = <&reg_3p3v>;
+					VDDIO-supply = <&reg_3p3v>;
+
+				};
+
+				pcf8563: rtc@51 {
+					compatible = "phg,pcf8563";
+					reg = <0x51>;
+				};
+			};
+
+			duart: serial@80074000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+
+			auart0: serial@8006a000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart0_pins_a>;
+				status = "okay";
+			};
+
+			auart1: serial@8006c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart1_2pins_a>;
+				status = "okay";
+			};
+
+			auart2: serial@8006e000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart2_2pins_a>;
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>;
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_3p3v: 3p3v {
+			compatible = "regulator-fixed";
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+
+	sound {
+		compatible = "bluegiga,apx4devkit-sgtl5000",
+			     "fsl,mxs-audio-sgtl5000";
+		model = "apx4devkit-sgtl5000";
+		saif-controllers = <&saif0 &saif1>;
+		audio-codec = <&sgtl5000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user {
+			label = "Heartbeat";
+			gpios = <&gpio3 28 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts
index c03a577..c03a577 100644
--- a/arch/arm/boot/dts/cfa10036.dts
+++ b/arch/arm/boot/dts/imx28-cfa10036.dts
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index 0d8739d..773c0e8 100644
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -24,7 +24,8 @@
 		apbh@80000000 {
 			gpmi-nand@8000c000 {
 				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg
+					     &gpmi_pins_evk>;
 				status = "okay";
 			};
 
@@ -59,6 +60,32 @@
 						0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */
 						0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
 						0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
+						0x3083 /* MX28_PAD_AUART2_RX__GPIO_3_8 */
+						0x3093 /* MX28_PAD_AUART2_TX__GPIO_3_9 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				gpmi_pins_evk: gpmi-nand-evk@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x0110 /* MX28_PAD_GPMI_CE1N__GPMI_CE1N */
+						0x0150 /* MX28_PAD_GPMI_RDY1__GPMI_READY1 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				lcdif_pins_evk: lcdif-evk@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
+						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
+						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
+						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -68,7 +95,8 @@
 
 			lcdif@80030000 {
 				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a>;
+				pinctrl-0 = <&lcdif_24bit_pins_a
+					     &lcdif_pins_evk>;
 				panel-enable-gpios = <&gpio3 30 0>;
 				status = "okay";
 			};
@@ -137,10 +165,28 @@
 				pinctrl-0 = <&auart3_pins_a>;
 				status = "okay";
 			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+
+			usbphy1: usbphy@8007e000 {
+				status = "okay";
+			};
 		};
 	};
 
 	ahb@80080000 {
+		usb0: usb@80080000 {
+			vbus-supply = <&reg_usb0_vbus>;
+			status = "okay";
+		};
+
+		usb1: usb@80090000 {
+			vbus-supply = <&reg_usb1_vbus>;
+			status = "okay";
+		};
+
 		mac0: ethernet@800f0000 {
 			phy-mode = "rmii";
 			pinctrl-names = "default";
@@ -185,6 +231,24 @@
 			regulator-max-microvolt = <3300000>;
 			gpio = <&gpio2 15 0>;
 		};
+
+		reg_usb0_vbus: usb0_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb0_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 9 0>;
+			enable-active-high;
+		};
+
+		reg_usb1_vbus: usb1_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 8 0>;
+			enable-active-high;
+		};
 	};
 
 	sound {
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
new file mode 100644
index 0000000..183a3fd
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-m28evk.dts
@@ -0,0 +1,210 @@
+/*
+ * Copyright (C) 2012 Marek Vasut <marex@denx.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx28.dtsi"
+
+/ {
+	model = "DENX M28EVK";
+	compatible = "denx,m28evk", "fsl,imx28";
+
+	memory {
+		reg = <0x40000000 0x08000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			gpmi-nand@8000c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+				status = "okay";
+
+				partition@0 {
+					label = "bootloader";
+					reg = <0x00000000 0x00300000>;
+					read-only;
+				};
+
+				partition@1 {
+					label = "environment";
+					reg = <0x00300000 0x00080000>;
+				};
+
+				partition@2 {
+					label = "redundant-environment";
+					reg = <0x00380000 0x00080000>;
+				};
+
+				partition@3 {
+					label = "kernel";
+					reg = <0x00400000 0x00400000>;
+				};
+
+				partition@4 {
+					label = "filesystem";
+					reg = <0x00800000 0x0f800000>;
+				};
+			};
+
+			ssp0: ssp@80010000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_8bit_pins_a
+					     &mmc0_cd_cfg
+					     &mmc0_sck_cfg>;
+				bus-width = <8>;
+				wp-gpios = <&gpio3 10 1>;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog-gpios@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x30a3 /* MX28_PAD_AUART2_CTS__GPIO_3_10 */
+						0x30b3 /* MX28_PAD_AUART2_RTS__GPIO_3_11 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				lcdif_pins_m28: lcdif-m28@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x11e0 /* MX28_PAD_LCD_DOTCLK__LCD_DOTCLK */
+						0x11f0 /* MX28_PAD_LCD_ENABLE__LCD_ENABLE */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+			};
+
+			lcdif@80030000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&lcdif_24bit_pins_a
+					     &lcdif_pins_m28>;
+				status = "okay";
+			};
+
+			can0: can@80032000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&can0_pins_a>;
+				status = "okay";
+			};
+
+			can1: can@80034000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&can1_pins_a>;
+				status = "okay";
+			};
+		};
+
+		apbx@80040000 {
+			saif0: saif@80042000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&saif0_pins_a>;
+				status = "okay";
+			};
+
+			saif1: saif@80046000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&saif1_pins_a>;
+				fsl,saif-master = <&saif0>;
+				status = "okay";
+			};
+
+			i2c0: i2c@80058000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins_a>;
+				status = "okay";
+
+				sgtl5000: codec@0a {
+					compatible = "fsl,sgtl5000";
+					reg = <0x0a>;
+					VDDA-supply = <&reg_3p3v>;
+					VDDIO-supply = <&reg_3p3v>;
+
+				};
+
+				eeprom: eeprom@51 {
+					compatible = "atmel,24c128";
+					reg = <0x51>;
+					pagesize = <32>;
+				};
+
+				rtc: rtc@68 {
+					compatible = "stm,mt41t62";
+					reg = <0x68>;
+				};
+			};
+
+			duart: serial@80074000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+
+			auart0: serial@8006a000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart0_2pins_a>;
+				status = "okay";
+			};
+
+			auart3: serial@80070000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart3_pins_a>;
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>;
+			phy-reset-gpios = <&gpio3 11 0>;
+			status = "okay";
+		};
+
+		mac1: ethernet@800f4000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac1_pins_a>;
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_3p3v: 3p3v {
+			compatible = "regulator-fixed";
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+
+	sound {
+		compatible = "denx,m28evk-sgtl5000",
+			     "fsl,mxs-audio-sgtl5000";
+		model = "m28evk-sgtl5000";
+		saif-controllers = <&saif0 &saif1>;
+		audio-codec = <&sgtl5000>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
new file mode 100644
index 0000000..62bf767
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -0,0 +1,97 @@
+/dts-v1/;
+/include/ "imx28.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX28 module";
+	compatible = "karo,tx28", "fsl,imx28";
+
+	memory {
+		reg = <0x40000000 0x08000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			ssp0: ssp@80010000 {
+				compatible = "fsl,imx28-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a
+					     &mmc0_cd_cfg
+					     &mmc0_sck_cfg>;
+				bus-width = <4>;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog-gpios@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x40a3 /* MX28_PAD_ENET0_RXD3__GPIO_4_10 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+			};
+		};
+
+		apbx@80040000 {
+			i2c0: i2c@80058000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins_a>;
+				status = "okay";
+
+				ds1339: rtc@68 {
+					compatible = "mxim,ds1339";
+					reg = <0x68>;
+				};
+			};
+
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm0_pins_a>;
+				status = "okay";
+			};
+
+			duart: serial@80074000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_4pins_a>;
+				status = "okay";
+			};
+
+			auart1: serial@8006c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart1_pins_a>;
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		user {
+			label = "Heartbeat";
+			gpios = <&gpio4 10 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index adb5ffc..915db89 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -186,6 +186,19 @@
 					fsl,pull-up = <0>;
 				};
 
+				duart_4pins_a: duart-4pins@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */
+						0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */
+						0x3002 /* MX28_PAD_AUART0_RX__DUART_CTS */
+						0x3012 /* MX28_PAD_AUART0_TX__DUART_RTS */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
 				gpmi_pins_a: gpmi-nand@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
@@ -198,9 +211,7 @@
 						0x0060 /* MX28_PAD_GPMI_D06__GPMI_D6 */
 						0x0070 /* MX28_PAD_GPMI_D07__GPMI_D7 */
 						0x0100 /* MX28_PAD_GPMI_CE0N__GPMI_CE0N */
-						0x0110 /* MX28_PAD_GPMI_CE1N__GPMI_CE1N */
 						0x0140 /* MX28_PAD_GPMI_RDY0__GPMI_READY0 */
-						0x0150 /* MX28_PAD_GPMI_RDY1__GPMI_READY1 */
 						0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */
 						0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */
 						0x01a0 /* MX28_PAD_GPMI_ALE__GPMI_ALE */
@@ -234,6 +245,52 @@
 					fsl,pull-up = <0>;
 				};
 
+				auart0_2pins_a: auart0-2pins@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */
+						0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				auart1_pins_a: auart1@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */
+						0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */
+						0x3060 /* MX28_PAD_AUART1_CTS__AUART1_CTS */
+						0x3070 /* MX28_PAD_AUART1_RTS__AUART1_RTS */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				auart1_2pins_a: auart1-2pins@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */
+						0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				auart2_2pins_a: auart2-2pins@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x2101 /* MX28_PAD_SSP2_SCK__AUART2_RX */
+						0x2111 /* MX28_PAD_SSP2_MOSI__AUART2_TX */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
 				auart3_pins_a: auart3@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
@@ -247,6 +304,17 @@
 					fsl,pull-up = <0>;
 				};
 
+				auart3_2pins_a: auart3-2pins@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x2121 /* MX28_PAD_SSP2_MISO__AUART3_RX */
+						0x2131 /* MX28_PAD_SSP2_SS0__AUART3_TX */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
 				mac0_pins_a: mac0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
@@ -365,6 +433,16 @@
 					fsl,pull-up = <1>;
 				};
 
+				pwm0_pins_a: pwm0@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x3100 /* MX28_PAD_PWM0__PWM_0 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
 				pwm2_pins_a: pwm2@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
@@ -402,10 +480,6 @@
 						0x1150 /* MX28_PAD_LCD_D21__LCD_D21 */
 						0x1160 /* MX28_PAD_LCD_D22__LCD_D22 */
 						0x1170 /* MX28_PAD_LCD_D23__LCD_D23 */
-						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
-						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
-						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
-						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -654,11 +728,13 @@
 			};
 
 			usbphy0: usbphy@8007c000 {
+				compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
 				reg = <0x8007c000 0x2000>;
 				status = "disabled";
 			};
 
 			usbphy1: usbphy@8007e000 {
+				compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
 				reg = <0x8007e000 0x2000>;
 				status = "disabled";
 			};
@@ -672,13 +748,19 @@
 		reg = <0x80080000 0x80000>;
 		ranges;
 
-		usbctrl0: usbctrl@80080000 {
+		usb0: usb@80080000 {
+			compatible = "fsl,imx28-usb", "fsl,imx27-usb";
 			reg = <0x80080000 0x10000>;
+			interrupts = <93>;
+			fsl,usbphy = <&usbphy0>;
 			status = "disabled";
 		};
 
-		usbctrl1: usbctrl@80090000 {
+		usb1: usb@80090000 {
+			compatible = "fsl,imx28-usb", "fsl,imx27-usb";
 			reg = <0x80090000 0x10000>;
+			interrupts = <92>;
+			fsl,usbphy = <&usbphy1>;
 			status = "disabled";
 		};