summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/tegra20-seaboard.dts
diff options
context:
space:
mode:
authorStephen Warren <swarren@nvidia.com>2012-06-20 15:58:34 -0600
committerStephen Warren <swarren@nvidia.com>2012-09-06 11:48:39 -0600
commit6529e638057d6591fb64f43a64820cce283c3536 (patch)
treeb5fd92a05bbfc917520ec6bf36481ce5e2984c10 /arch/arm/boot/dts/tegra20-seaboard.dts
parentfa4a925230835eab27c9c97a0a6d72caa4fe2b67 (diff)
downloadop-kernel-dev-6529e638057d6591fb64f43a64820cce283c3536.zip
op-kernel-dev-6529e638057d6591fb64f43a64820cce283c3536.tar.gz
ARM: dt: tegra: seaboard: add regulators
Seaboard uses a TPS6586x regulator. Instantiate this, and hook up a couple of fixed GPIO-controlled regulators too. Two data sources were used for the data encoded here: * The HW defaults, as extracted from real HW. * The schematic, which specifies a voltage for each LDO rail. In most cases these sources matched. The only differences is: ldo6: The HW default on Springbank is 2.85v. The HW default on Seaboard is 1.8v. The schematics for both Springbank and Seaboard match at 2.85v. However, internal research indicates that the schematics are incorrectly labelled, and 1.8v is correct. The ChromeOS kernel also uses 1.8v. Note that these settings don't entirely match those in the ChromeOS kernel found at the URL below. However, the selected values generally cause no behavior change in the kernel, and so were picked to avoid regressions. repo http://git.chromium.org/chromiumos/third_party/kernel.git branch chromeos-3.2 file arch/arm/mach-tegra/board-seaboard-power.c Portions based on work by Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
Diffstat (limited to 'arch/arm/boot/dts/tegra20-seaboard.dts')
-rw-r--r--arch/arm/boot/dts/tegra20-seaboard.dts184
1 files changed, 184 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index 85e621a..92deb36 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -374,6 +374,152 @@
status = "okay";
clock-frequency = <400000>;
+ pmic: tps6586x@34 {
+ compatible = "ti,tps6586x";
+ reg = <0x34>;
+ interrupts = <0 86 0x4>;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ sys-supply = <&vdd_5v0_reg>;
+ vin-sm0-supply = <&sys_reg>;
+ vin-sm1-supply = <&sys_reg>;
+ vin-sm2-supply = <&sys_reg>;
+ vinldo01-supply = <&sm2_reg>;
+ vinldo23-supply = <&sm2_reg>;
+ vinldo4-supply = <&sm2_reg>;
+ vinldo678-supply = <&sm2_reg>;
+ vinldo9-supply = <&sm2_reg>;
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sys_reg: regulator@0 {
+ reg = <0>;
+ regulator-compatible = "sys";
+ regulator-name = "vdd_sys";
+ regulator-always-on;
+ };
+
+ regulator@1 {
+ reg = <1>;
+ regulator-compatible = "sm0";
+ regulator-name = "vdd_sm0,vdd_core";
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ };
+
+ regulator@2 {
+ reg = <2>;
+ regulator-compatible = "sm1";
+ regulator-name = "vdd_sm1,vdd_cpu";
+ regulator-min-microvolt = <1125000>;
+ regulator-max-microvolt = <1125000>;
+ regulator-always-on;
+ };
+
+ sm2_reg: regulator@3 {
+ reg = <3>;
+ regulator-compatible = "sm2";
+ regulator-name = "vdd_sm2,vin_ldo*";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ regulator-always-on;
+ };
+
+ /* LDO0 is not connected to anything */
+
+ regulator@5 {
+ reg = <5>;
+ regulator-compatible = "ldo1";
+ regulator-name = "vdd_ldo1,avdd_pll*";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ regulator@6 {
+ reg = <6>;
+ regulator-compatible = "ldo2";
+ regulator-name = "vdd_ldo2,vdd_rtc";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ regulator@7 {
+ reg = <7>;
+ regulator-compatible = "ldo3";
+ regulator-name = "vdd_ldo3,avdd_usb*";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ regulator@8 {
+ reg = <8>;
+ regulator-compatible = "ldo4";
+ regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ regulator@9 {
+ reg = <9>;
+ regulator-compatible = "ldo5";
+ regulator-name = "vdd_ldo5,vcore_mmc";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+
+ regulator@10 {
+ reg = <10>;
+ regulator-compatible = "ldo6";
+ regulator-name = "vdd_ldo6,avdd_vdac,vddio_vi,vddio_cam";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ regulator@11 {
+ reg = <11>;
+ regulator-compatible = "ldo7";
+ regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ regulator@12 {
+ reg = <12>;
+ regulator-compatible = "ldo8";
+ regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ regulator@13 {
+ reg = <13>;
+ regulator-compatible = "ldo9";
+ regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+
+ regulator@14 {
+ reg = <14>;
+ regulator-compatible = "ldo_rtc";
+ regulator-name = "vdd_rtc_out,vdd_cell";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+
temperature-sensor@4c {
compatible = "nct1008";
reg = <0x4c>;
@@ -387,6 +533,10 @@
};
};
+ pmc {
+ nvidia,invert-interrupt;
+ };
+
memory-controller@0x7000f400 {
emc-table@190000 {
reg = <190000>;
@@ -473,6 +623,40 @@
};
};
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd_5v0_reg: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "vdd_5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "vdd_1v5";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ gpio = <&pmic 0 0>;
+ };
+
+ regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "vdd_1v2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ gpio = <&pmic 1 0>;
+ enable-active-high;
+ };
+ };
+
sound {
compatible = "nvidia,tegra-audio-wm8903-seaboard",
"nvidia,tegra-audio-wm8903";
OpenPOWER on IntegriCloud