diff options
author | Chen-Yu Tsai <wens@csie.org> | 2016-08-27 15:55:44 +0800 |
---|---|---|
committer | Maxime Ripard <maxime.ripard@free-electrons.com> | 2016-09-21 11:48:08 +0300 |
commit | 013ace36f89b38c59a0adb5ffe215dab6eeabb2f (patch) | |
tree | dce9d6557b1711e5ab08e391d4dd7f51498d2f86 /arch/arm/boot/dts/sun9i-a80-optimus.dts | |
parent | f97f02eef2b218e2d963b6f9c3e91380ab1cb0cf (diff) | |
download | op-kernel-dev-013ace36f89b38c59a0adb5ffe215dab6eeabb2f.zip op-kernel-dev-013ace36f89b38c59a0adb5ffe215dab6eeabb2f.tar.gz |
ARM: dts: sun9i: a80-optimus: Disable EHCI1
EHCI1 provides an HSIC interface. This interface is exposed on the
board through two pins among the GPIO header.
With the PHY now powered up and responding, enabling the interface when
nothing is connected results in a lot of error messages:
usb 2-1: device descriptor read/64, error -71
usb 2-1: device descriptor read/64, error -71
usb 2-1: new high-speed USB device number 3 using ehci-platform
usb 2-1: device descriptor read/64, error -71
usb 2-1: device descriptor read/64, error -71
usb 2-1: new high-speed USB device number 4 using ehci-platform
usb 2-1: device not accepting address 4, error -71
usb 2-1: new high-speed USB device number 5 using ehci-platform
usb 2-1: device not accepting address 5, error -71
usb usb2-port1: unable to enumerate USB device
Disable it by default, but leave the entries in the board DTS.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Diffstat (limited to 'arch/arm/boot/dts/sun9i-a80-optimus.dts')
-rw-r--r-- | arch/arm/boot/dts/sun9i-a80-optimus.dts | 6 |
1 files changed, 4 insertions, 2 deletions
diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index d805cb5..ceb6ef1 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -112,7 +112,8 @@ }; &ehci1 { - status = "okay"; + /* Enable if HSIC peripheral is connected */ + status = "disabled"; }; &ehci2 { @@ -484,7 +485,8 @@ &usbphy2 { phy-supply = <®_bldo4>; - status = "okay"; + /* Enable if HSIC peripheral is connected */ + status = "disabled"; }; &usbphy3 { |