diff options
author | Chen-Yu Tsai <wens@csie.org> | 2017-04-19 13:09:19 +0800 |
---|---|---|
committer | Maxime Ripard <maxime.ripard@free-electrons.com> | 2017-05-14 08:32:32 +0200 |
commit | ef00b70d386499aa110a03fa283e35f5839f13fa (patch) | |
tree | 992b6a382a52f807750b8348e1d8d7c842f07703 /arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts | |
parent | 52826587a44f55e958e89c6f21bfdaadf0273ac8 (diff) | |
download | op-kernel-dev-ef00b70d386499aa110a03fa283e35f5839f13fa.zip op-kernel-dev-ef00b70d386499aa110a03fa283e35f5839f13fa.tar.gz |
ARM: sun8i: h3: bananapi-m2-plus: Enable USB OTG
The Bananapi M2 Plus has a USB OTG port that can be used in both
powered host mode and peripheral mode. When in peripheral mode,
the port does not power the board. There is no VBUS sensing on
the port.
This patch adds the regulator controlling VBUS on the OTG port,
the GPIO for the ID detect pin, and enables the USB OTG and host
controllers.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Diffstat (limited to 'arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts')
-rw-r--r-- | arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts | 22 |
1 files changed, 21 insertions, 1 deletions
diff --git a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts index 52acbe1..17c7c08 100644 --- a/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts @@ -92,6 +92,10 @@ }; }; +&ehci0 { + status = "okay"; +}; + &ehci1 { status = "okay"; }; @@ -145,6 +149,10 @@ status = "okay"; }; +&ohci0 { + status = "okay"; +}; + &ohci1 { status = "okay"; }; @@ -170,6 +178,11 @@ }; }; +®_usb0_vbus { + gpio = <&pio 3 11 GPIO_ACTIVE_HIGH>; /* PD11 */ + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; @@ -182,7 +195,14 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { - /* USB VBUS is on as long as VCC-IO is on */ + usb0_id_det-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ + usb0_vbus-supply = <®_usb0_vbus>; + /* USB host VBUS is on as long as VCC-IO is on */ status = "okay"; }; |