summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
diff options
context:
space:
mode:
authorLinus Walleij <linus.walleij@linaro.org>2014-07-25 12:18:42 +0200
committerOlof Johansson <olof@lixom.net>2014-07-30 12:47:17 -0700
commit3181788c3ac3a78d43a41b74d77f348b4855627e (patch)
tree22a00c3af5f3c265cc5b382729a7d76a5bc93dca /arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
parenta1ae5b128365f36a3fa2143cfa9de14fc71c51d8 (diff)
downloadop-kernel-dev-3181788c3ac3a78d43a41b74d77f348b4855627e.zip
op-kernel-dev-3181788c3ac3a78d43a41b74d77f348b4855627e.tar.gz
ARM: nomadik: fix up double inversion in DT
The GPIO pin connected to card detect was inverted twice: once by the argument to the GPIO line itself where it was magically marked as active low by the flag GPIO_ACTIVE_LOW (0x01) in the third cell, and also marked active low AGAIN by explicitly stating "cd-inverted" (a deprecated method). After commit 78f87df2b4f8760954d7d80603d0cfcbd4759683 "mmc: mmci: Use the common mmc DT parser" this results in the line being inverted twice so it was effectively uninverted, while the old code would not have this effect, instead disregarding the flag on the GPIO line altogether, which is a bug. I admit the semantics may be unclear but inverting twice is as good a definition as any on how this should work. So fix up the buggy device tree. Use proper #includes so the DTS is clear and readable. Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
Diffstat (limited to 'arch/arm/boot/dts/ste-nomadik-stn8815.dtsi')
-rw-r--r--arch/arm/boot/dts/ste-nomadik-stn8815.dtsi7
1 files changed, 4 insertions, 3 deletions
diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
index d316c95..dbcf521 100644
--- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@@ -1,7 +1,9 @@
/*
* Device Tree for the ST-Ericsson Nomadik 8815 STn8815 SoC
*/
-/include/ "skeleton.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include "skeleton.dtsi"
/ {
#address-cells = <1>;
@@ -842,8 +844,7 @@
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
- cd-gpios = <&gpio3 15 0x1>;
- cd-inverted;
+ cd-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&mmcsd_default_mux>, <&mmcsd_default_mode>;
vmmc-supply = <&vmmc_regulator>;
OpenPOWER on IntegriCloud