ARM: nomadik: move the pin configuration to DT

This moves the pin configuration for the Nomadik over to the
device tree using Gabriel's bindings. Remove the auxdata
nailing down the name of the pin controller as this is no
longer necessary.

Cc: Gabriel Fernandez <gabriel.fernandez@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 82 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
index 51a33e0..615da87 100644
--- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@@ -94,6 +94,75 @@
 
 	pinctrl {
 		compatible = "stericsson,nmk-pinctrl-stn8815";
+		/* Pin configurations */
+		uart0 {
+			uart0_default_mux: uart0_mux {
+				u0_default_mux {
+					ste,function = "u0";
+					ste,pins = "u0_a_1";
+				};
+			};
+		};
+		uart1 {
+			uart1_default_mux: uart1_mux {
+				u1_default_mux {
+					ste,function = "u1";
+					ste,pins = "u1_a_1";
+				};
+			};
+		};
+		mmcsd {
+			mmcsd_default_mux: mmcsd_mux {
+				mmcsd_default_mux {
+					ste,function = "mmcsd";
+					ste,pins = "mmcsd_a_1";
+				};
+			};
+			mmcsd_default_mode: mmcsd_default {
+				mmcsd_default_cfg1 {
+					/* MCCLK */
+					ste,pins = "GPIO8_B10";
+					ste,output = <0>;
+				};
+				mmcsd_default_cfg2 {
+					/* MCCMDDIR, MCDAT0DIR, MCDAT31DIR */
+					ste,pins = "GPIO10_C11", "GPIO15_A12",
+					"GPIO16_C13";
+					ste,output = <1>;
+				};
+				mmcsd_default_cfg3 {
+					/* MCCMD, MCDAT3-0, MCMSFBCLK */
+					ste,pins = "GPIO9_A10", "GPIO11_B11",
+					"GPIO12_A11", "GPIO13_C12",
+					"GPIO14_B12", "GPIO24_C15";
+					ste,input = <1>;
+				};
+			};
+		};
+		i2c0 {
+			i2c0_default_mode: i2c0_default {
+				i2c0_default_cfg {
+					ste,pins = "GPIO62_D3", "GPIO63_D2";
+					ste,input = <1>;
+				};
+			};
+		};
+		i2c1 {
+			i2c1_default_mode: i2c1_default {
+				i2c1_default_cfg {
+					ste,pins = "GPIO53_L4", "GPIO54_L3";
+					ste,input = <1>;
+				};
+			};
+		};
+		i2c2 {
+			i2c2_default_mode: i2c2_default {
+				i2c2_default_cfg {
+					ste,pins = "GPIO73_C21", "GPIO74_C20";
+					ste,input = <1>;
+				};
+			};
+		};
 	};
 
 	src: src@101e0000 {
@@ -191,6 +260,8 @@
 			<&gpio1 30 0>; /* scl */
 		#address-cells = <1>;
 		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_default_mode>;
 
 		stw4811@2d {
 			   compatible = "st,stw4811";
@@ -205,6 +276,8 @@
 			<&gpio1 21 0>; /* scl */
 		#address-cells = <1>;
 		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_default_mode>;
 
 		camera@2d {
 			   compatible = "st,camera";
@@ -227,6 +300,9 @@
 			<&gpio2 9 0>; /* scl */
 		#address-cells = <1>;
 		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_default_mode>;
+
 		stw4811@2d {
 			   compatible = "st,stw4811-usb";
 			   reg = <0x2d>;
@@ -260,6 +336,8 @@
 			interrupts = <12>;
 			clocks = <&clk48>, <&pclk>;
 			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart0_default_mux>;
 		};
 
 		uart1: uart@101fb000 {
@@ -269,6 +347,8 @@
 			interrupts = <17>;
 			clocks = <&clk48>, <&pclk>;
 			clock-names = "uartclk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart1_default_mux>;
 		};
 
 		uart2: uart@101f2000 {
@@ -310,6 +390,8 @@
 			mmc-cap-sd-highspeed;
 			cd-gpios = <&gpio3 15 0x1>;
 			cd-inverted;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmcsd_default_mux>, <&mmcsd_default_mode>;
 		};
 	};
 };