summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/omap4-sdp.dts
diff options
context:
space:
mode:
authorJon Hunter <jon-hunter@ti.com>2013-04-10 12:31:07 -0500
committerTony Lindgren <tony@atomide.com>2013-05-08 15:03:35 -0700
commite60f18d6bca2753c12f0b3229a250d9a55954d41 (patch)
treee10676e55f9bfc0dd986b70761afb644d59f879b /arch/arm/boot/dts/omap4-sdp.dts
parentbb9055b2744ada735a2fe555c4196ad39a83ef2a (diff)
downloadop-kernel-dev-e60f18d6bca2753c12f0b3229a250d9a55954d41.zip
op-kernel-dev-e60f18d6bca2753c12f0b3229a250d9a55954d41.tar.gz
ARM: dts: OMAP4: Fix ethernet IRQ for OMAP4 boards
Commit ff5c9059 (ARM: dts: OMAP3+: Correct gpio #interrupts-cells property) updated the number of interrupt cells required for configuring gpios as interrupts for other devices (such as ethernet controllers). This update allowed the interrupt type (edge, level, etc) to be configured via device-tree (as described in the Documentation/devicetree/bindings/gpio/gpio-omap.txt). This broke ethernet support on the OMAP4 SDP board that defines a gpio as the ethernet IRQ because the interrupt type (level, edge, etc) was not getting configured correctly. This board use the ks8851 ethernet chip which has an active low interrupt. Fix this by defining the gpio interrupt as active-low in the device-tree binding. Please note that the OMAP4-VAR-SOM also uses the same ethernet controller and it is expected it will have the same problem. So the same fix is also applied to this board. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'arch/arm/boot/dts/omap4-sdp.dts')
-rw-r--r--arch/arm/boot/dts/omap4-sdp.dts2
1 files changed, 1 insertions, 1 deletions
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index c387bdc..25cbe43 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -363,7 +363,7 @@
spi-max-frequency = <24000000>;
reg = <0>;
interrupt-parent = <&gpio2>;
- interrupts = <2>; /* gpio line 34 */
+ interrupts = <2 8>; /* gpio line 34, low triggered */
vdd-supply = <&vdd_eth>;
};
};
OpenPOWER on IntegriCloud