summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/omap3-n900.dts
diff options
context:
space:
mode:
authorTony Lindgren <tony@atomide.com>2013-11-25 14:23:45 -0800
committerTony Lindgren <tony@atomide.com>2013-11-25 14:23:45 -0800
commitedd5eb4e99e4153ea7be05390fda542d986bf28d (patch)
tree98bf319485e262b9445c710ece9828fc037e6f53 /arch/arm/boot/dts/omap3-n900.dts
parent26f67a31265d459aa6f93b0a1ecbd64e7435519d (diff)
downloadop-kernel-dev-edd5eb4e99e4153ea7be05390fda542d986bf28d.zip
op-kernel-dev-edd5eb4e99e4153ea7be05390fda542d986bf28d.tar.gz
ARM: OMAP2+: Fix eMMC on n900 with device tree
Looks like we need to configure the regulators and use the pdata quirk to make eMMC work with device tree. It seems that mostly vaux3 is used, and only some earlier revisions used vmmc2. This has been tested to work on devices where the system_rev passed by the bootloader has versions 0x0010, 0x2101 and 0x2204. Cc: devicetree@vger.kernel.org Cc: Pavel Machek <pavel@ucw.cz> Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Sebastian Reichel <sre@debian.org> [tony@atomide.com: updated with pinctrl changes and comments from Sebastian] Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'arch/arm/boot/dts/omap3-n900.dts')
-rw-r--r--arch/arm/boot/dts/omap3-n900.dts23
1 files changed, 22 insertions, 1 deletions
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index c4f20bf..c2c306d 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -125,6 +125,21 @@
>;
};
+ mmc2_pins: pinmux_mmc2_pins {
+ pinctrl-single,pins = <
+ 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
+ 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
+ 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
+ 0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
+ 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
+ 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
+ 0x134 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat4 */
+ 0x136 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat5 */
+ 0x138 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat6 */
+ 0x13a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7 */
+ >;
+ };
+
display_pins: pinmux_display_pins {
pinctrl-single,pins = <
0x0d4 (PIN_OUTPUT | MUX_MODE4) /* RX51_LCD_RESET_GPIO */
@@ -358,8 +373,14 @@
cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
};
+/* most boards use vaux3, only some old versions use vmmc2 instead */
&mmc2 {
- status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins>;
+ vmmc-supply = <&vaux3>;
+ vmmc_aux-supply = <&vsim>;
+ bus-width = <8>;
+ non-removable;
};
&mmc3 {
OpenPOWER on IntegriCloud