diff options
| author | Marco Franchi <marco.franchi@nxp.com> | 2017-07-17 13:12:14 -0300 |
|---|---|---|
| committer | Shawn Guo <shawnguo@kernel.org> | 2017-07-25 16:48:41 +0800 |
| commit | 5eaeaccdaedb5f84e3d48a3b1b551bc9c5aaf704 (patch) | |
| tree | 0b5bdea8b3dd527eb5794eb250587db65b4ada48 /arch/arm/boot/dts/imx7d-sdb.dts | |
| parent | d8236af53074c61b7f88af773357f3cdcf378a9d (diff) | |
| download | op-kernel-dev-5eaeaccdaedb5f84e3d48a3b1b551bc9c5aaf704.zip op-kernel-dev-5eaeaccdaedb5f84e3d48a3b1b551bc9c5aaf704.tar.gz | |
ARM: dts: imx7d-sdb: Pass 'enable-gpios' and 'power-supply' properties
Currently the LCD is turned on thanks to the bootloader initialization.
In order to make the kernel to turn on the LCD on is own, pass the
'enable-gpios' and 'power-supply' properties.
Also, the GPIO1_IO01 is not used as PWM functionality on this board. It is
connected to the PWREN pin of connector J14 and has a GPIO function, so
remove the PWM1 node and change the GPIO1_IO01 IOMUX to GPIO function.
Signed-off-by: Marco Franchi <marco.franchi@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Diffstat (limited to 'arch/arm/boot/dts/imx7d-sdb.dts')
| -rw-r--r-- | arch/arm/boot/dts/imx7d-sdb.dts | 21 |
1 files changed, 13 insertions, 8 deletions
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 5827ae3..486752d 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -118,8 +118,19 @@ startup-delay-us = <200000>; }; + reg_lcd_3v3: regulator-lcd-3v3 { + compatible = "regulator-fixed"; + regulator-name = "lcd-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&extended_io 7 GPIO_ACTIVE_LOW>; + }; + panel { compatible = "innolux,at043tn24"; + pinctrl-0 = <&pinctrl_backlight>; + enable-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + power-supply = <®_lcd_3v3>; port { panel_in: endpoint { @@ -347,12 +358,6 @@ status = "okay"; }; -&pwm1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pwm1>; - status = "okay"; -}; - &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; @@ -684,9 +689,9 @@ >; }; - pinctrl_pwm1: pwm1grp { + pinctrl_backlight: backlightgrp { fsl,pins = < - MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x110b0 + MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1 0x110b0 >; pinctrl_spi4: spi4grp { |
