Merge tag 'late-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC i.MX DT changes from Olof Johansson:
 "This branch contains of devicetree changes for the Freescale i.MX
  platform.

  The base patch of the branch changes the format of the dts files to a
  slightly different format that makes it easier to do derivative board
  definitions, but it also introduces a lot of churn in the process
  since every line of the file is touched.

  On top of that are a handful of the regular changes; enabling more
  boards as DT-based instead of legacy board files (mx25pdk), enabling
  another driver for devicetree and thus adding bindings (onewire), etc.

  I'm not happy about the churn, and will likely not take it for other
  platforms in the future."

* tag 'late-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits)
  ARM: dts: add dtsi for imx6q and imx6dl
  ARM: dts: rename imx6q.dtsi to imx6qdl.dtsi
  ARM: dts: i.MX6: Add regulator delay support
  ARM: dts: Add device tree entry for onewire master on i.MX53
  ARM: i.MX53: Add clocks for i.mx53 onewire master.
  W1: Add device tree support to MXC onewire master.
  ARM: imx: enable imx6q-cpufreq support
  ARM: dts: Add apf51 basic support
  ARM i.MX6: change mxs usbphy clock usage
  ARM: dts: imx6q: Remove silicon version from SDMA firmware
  ARM i.MX53: dts: add oftree for MBa53 baseboard
  ARM i.MX53: add dts for the TQ tqma53 module
  ARM: dts: imx53: pinctrl update
  ARM i.MX51 babbage: Add keypad support
  ARM: dts: imx: Add imx51 KPP entry
  ARM: dts: imx25-karo-tx25: Put status entry in the end
  ARM: mx25pdk: Add device tree support
  ARM: dts: imx: use nodes label in board dts
  ARM: dts: add missing imx dtb targets
  ARM: boot: dts: Add an entry for imx27-pdk.dtb
  ...

1 files changed, 104 insertions, 112 deletions

diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index d152328..2ce355c 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -21,118 +21,6 @@
 		reg = <0x10000000 0x40000000>;
 	};
 
-	soc {
-		aips-bus@02000000 { /* AIPS1 */
-			spba-bus@02000000 {
-				ecspi@02008000 { /* eCSPI1 */
-					fsl,spi-num-chipselects = <1>;
-					cs-gpios = <&gpio3 19 0>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_ecspi1_1>;
-					status = "okay";
-
-					flash: m25p80@0 {
-						compatible = "sst,sst25vf016b";
-						spi-max-frequency = <20000000>;
-						reg = <0>;
-					};
-				};
-
-				ssi1: ssi@02028000 {
-					fsl,mode = "i2s-slave";
-					status = "okay";
-				};
-			};
-
-			iomuxc@020e0000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_hog>;
-
-				hog {
-					pinctrl_hog: hoggrp {
-						fsl,pins = <
-							1450 0x80000000	/* MX6Q_PAD_NANDF_D6__GPIO_2_6 */
-							1458 0x80000000	/* MX6Q_PAD_NANDF_D7__GPIO_2_7 */
-							121  0x80000000	/* MX6Q_PAD_EIM_D19__GPIO_3_19 */
-							144  0x80000000	/* MX6Q_PAD_EIM_D22__GPIO_3_22 */
-							152  0x80000000	/* MX6Q_PAD_EIM_D23__GPIO_3_23 */
-							1262 0x80000000 /* MX6Q_PAD_SD3_DAT5__GPIO_7_0 */
-							1270 0x1f0b0	/* MX6Q_PAD_SD3_DAT4__GPIO_7_1 */
-							953  0x80000000	/* MX6Q_PAD_GPIO_0__CCM_CLKO */
-						>;
-					};
-				};
-			};
-		};
-
-		aips-bus@02100000 { /* AIPS2 */
-			usb@02184000 { /* USB OTG */
-				vbus-supply = <&reg_usb_otg_vbus>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usbotg_1>;
-				disable-over-current;
-				status = "okay";
-			};
-
-			usb@02184200 { /* USB1 */
-				status = "okay";
-			};
-
-			ethernet@02188000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_enet_1>;
-				phy-mode = "rgmii";
-				phy-reset-gpios = <&gpio3 23 0>;
-				status = "okay";
-			};
-
-			usdhc@02198000 { /* uSDHC3 */
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usdhc3_2>;
-				cd-gpios = <&gpio7 0 0>;
-				wp-gpios = <&gpio7 1 0>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-			};
-
-			usdhc@0219c000 { /* uSDHC4 */
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usdhc4_2>;
-				cd-gpios = <&gpio2 6 0>;
-				wp-gpios = <&gpio2 7 0>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-			};
-
-			audmux@021d8000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_audmux_1>;
-			};
-
-			uart2: serial@021e8000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_uart2_1>;
-			};
-
-			i2c@021a0000 { /* I2C1 */
-				status = "okay";
-				clock-frequency = <100000>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_i2c1_1>;
-
-				codec: sgtl5000@0a {
-					compatible = "fsl,sgtl5000";
-					reg = <0x0a>;
-					clocks = <&clks 169>;
-					VDDA-supply = <&reg_2p5v>;
-					VDDIO-supply = <&reg_3p3v>;
-				};
-			};
-		};
-	};
-
 	regulators {
 		compatible = "simple-bus";
 
@@ -176,3 +64,107 @@
 		mux-ext-port = <4>;
 	};
 };
+
+&ecspi1 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio3 19 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1_1>;
+	status = "okay";
+
+	flash: m25p80@0 {
+		compatible = "sst,sst25vf016b";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&ssi1 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	hog {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				1450 0x80000000	/* MX6Q_PAD_NANDF_D6__GPIO_2_6 */
+				1458 0x80000000	/* MX6Q_PAD_NANDF_D7__GPIO_2_7 */
+				121  0x80000000	/* MX6Q_PAD_EIM_D19__GPIO_3_19 */
+				144  0x80000000	/* MX6Q_PAD_EIM_D22__GPIO_3_22 */
+				152  0x80000000	/* MX6Q_PAD_EIM_D23__GPIO_3_23 */
+				1262 0x80000000 /* MX6Q_PAD_SD3_DAT5__GPIO_7_0 */
+				1270 0x1f0b0	/* MX6Q_PAD_SD3_DAT4__GPIO_7_1 */
+				953  0x80000000	/* MX6Q_PAD_GPIO_0__CCM_CLKO */
+			>;
+		};
+	};
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg_1>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet_1>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio3 23 0>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3_2>;
+	cd-gpios = <&gpio7 0 0>;
+	wp-gpios = <&gpio7 1 0>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4_2>;
+	cd-gpios = <&gpio2 6 0>;
+	wp-gpios = <&gpio2 7 0>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&audmux {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux_1>;
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_1>;
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1_1>;
+
+	codec: sgtl5000@0a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks 169>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};