summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/imx6q-arm2.dts
diff options
context:
space:
mode:
authorShawn Guo <shawn.guo@linaro.org>2012-12-31 11:32:48 +0800
committerShawn Guo <shawn.guo@linaro.org>2013-02-10 23:25:42 +0800
commitbe4ccfcec3e958ef1eae59430e9962a514f34681 (patch)
treea46936784c1fb1b040469b126052c7432805887f /arch/arm/boot/dts/imx6q-arm2.dts
parent8ba472357a87503df2214ddc0270706ae34da4a1 (diff)
downloadop-kernel-dev-be4ccfcec3e958ef1eae59430e9962a514f34681.zip
op-kernel-dev-be4ccfcec3e958ef1eae59430e9962a514f34681.tar.gz
ARM: dts: imx: use nodes label in board dts
Following omap3-evm.dts way, it changes all imx dts files to use label in board dts to refer to nodes defined by soc dtsi. Thus, the board dts files become easier to read and edit with the least indentation levels. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Diffstat (limited to 'arch/arm/boot/dts/imx6q-arm2.dts')
-rw-r--r--arch/arm/boot/dts/imx6q-arm2.dts124
1 files changed, 59 insertions, 65 deletions
diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts
index 5bfa02a..53eb241 100644
--- a/arch/arm/boot/dts/imx6q-arm2.dts
+++ b/arch/arm/boot/dts/imx6q-arm2.dts
@@ -21,71 +21,6 @@
reg = <0x10000000 0x80000000>;
};
- soc {
- gpmi-nand@00112000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpmi_nand_1>;
- status = "disabled"; /* gpmi nand conflicts with SD */
- };
-
- aips-bus@02000000 { /* AIPS1 */
- iomuxc@020e0000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog>;
-
- hog {
- pinctrl_hog: hoggrp {
- fsl,pins = <
- 176 0x80000000 /* MX6Q_PAD_EIM_D25__GPIO_3_25 */
- >;
- };
- };
-
- arm2 {
- pinctrl_usdhc3_arm2: usdhc3grp-arm2 {
- fsl,pins = <
- 1363 0x80000000 /* MX6Q_PAD_NANDF_CS0__GPIO_6_11 */
- 1369 0x80000000 /* MX6Q_PAD_NANDF_CS1__GPIO_6_14 */
- >;
- };
- };
- };
- };
-
- aips-bus@02100000 { /* AIPS2 */
- ethernet@02188000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet_2>;
- phy-mode = "rgmii";
- status = "okay";
- };
-
- usdhc@02198000 { /* uSDHC3 */
- cd-gpios = <&gpio6 11 0>;
- wp-gpios = <&gpio6 14 0>;
- vmmc-supply = <&reg_3p3v>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc3_1
- &pinctrl_usdhc3_arm2>;
- status = "okay";
- };
-
- usdhc@0219c000 { /* uSDHC4 */
- non-removable;
- vmmc-supply = <&reg_3p3v>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc4_1>;
- status = "okay";
- };
-
- uart4: serial@021f0000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart4_1>;
- status = "okay";
- };
- };
- };
-
regulators {
compatible = "simple-bus";
@@ -108,3 +43,62 @@
};
};
};
+
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand_1>;
+ status = "disabled"; /* gpmi nand conflicts with SD */
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ 176 0x80000000 /* MX6Q_PAD_EIM_D25__GPIO_3_25 */
+ >;
+ };
+ };
+
+ arm2 {
+ pinctrl_usdhc3_arm2: usdhc3grp-arm2 {
+ fsl,pins = <
+ 1363 0x80000000 /* MX6Q_PAD_NANDF_CS0__GPIO_6_11 */
+ 1369 0x80000000 /* MX6Q_PAD_NANDF_CS1__GPIO_6_14 */
+ >;
+ };
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet_2>;
+ phy-mode = "rgmii";
+ status = "okay";
+};
+
+&usdhc3 {
+ cd-gpios = <&gpio6 11 0>;
+ wp-gpios = <&gpio6 14 0>;
+ vmmc-supply = <&reg_3p3v>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3_1
+ &pinctrl_usdhc3_arm2>;
+ status = "okay";
+};
+
+&usdhc4 {
+ non-removable;
+ vmmc-supply = <&reg_3p3v>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4_1>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4_1>;
+ status = "okay";
+};
OpenPOWER on IntegriCloud