diff options
author | Shawn Guo <shawn.guo@linaro.org> | 2014-02-07 23:18:30 +0800 |
---|---|---|
committer | Shawn Guo <shawn.guo@linaro.org> | 2014-02-09 21:32:30 +0800 |
commit | 352d318cc9136d5be9c41e9fb235afc0822a375e (patch) | |
tree | 233e60d25f57a7621e57a52ca9cbb9eb98bb853b /arch/arm/boot/dts/imx28-m28cu3.dts | |
parent | a4a2aa9b038c3285ca4c3f2a746b1950d66f5fa9 (diff) | |
download | op-kernel-dev-352d318cc9136d5be9c41e9fb235afc0822a375e.zip op-kernel-dev-352d318cc9136d5be9c41e9fb235afc0822a375e.tar.gz |
ARM: dts: imx: use generic node name for fixed regulator
The device tree specification recommends that generic name should be
used for nodes. So instead of naming those fixed regulator nodes
arbitrarily, let's use the generic name 'regulator@num' for those nodes.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Diffstat (limited to 'arch/arm/boot/dts/imx28-m28cu3.dts')
-rw-r--r-- | arch/arm/boot/dts/imx28-m28cu3.dts | 14 |
1 files changed, 10 insertions, 4 deletions
diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts index d3958da..d6e71ed 100644 --- a/arch/arm/boot/dts/imx28-m28cu3.dts +++ b/arch/arm/boot/dts/imx28-m28cu3.dts @@ -229,33 +229,39 @@ regulators { compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; - reg_3p3v: 3p3v { + reg_3p3v: regulator@0 { compatible = "regulator-fixed"; + reg = <0>; regulator-name = "3P3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; - reg_vddio_sd0: vddio-sd0 { + reg_vddio_sd0: regulator@1 { compatible = "regulator-fixed"; + reg = <1>; regulator-name = "vddio-sd0"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; gpio = <&gpio3 29 0>; }; - reg_vddio_sd1: vddio-sd1 { + reg_vddio_sd1: regulator@2 { compatible = "regulator-fixed"; + reg = <2>; regulator-name = "vddio-sd1"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; gpio = <&gpio2 19 0>; }; - reg_usb1_vbus: usb1_vbus { + reg_usb1_vbus: regulator@3 { compatible = "regulator-fixed"; + reg = <3>; regulator-name = "usb1_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; |