summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/imx28-evk.dts
diff options
context:
space:
mode:
authorLothar Waßmann <LW@KARO-electronics.de>2013-09-22 14:02:59 +0800
committerShawn Guo <shawn.guo@linaro.org>2013-09-26 13:01:37 +0800
commit4191c3401179a3c068fccd5ff84401a7e3d596e3 (patch)
treebc424ed27421435befc32c99848a09a73e2dfd70 /arch/arm/boot/dts/imx28-evk.dts
parentbc3875f1a61e30dc56b00ffbd55daabce271e2ee (diff)
downloadop-kernel-dev-4191c3401179a3c068fccd5ff84401a7e3d596e3.zip
op-kernel-dev-4191c3401179a3c068fccd5ff84401a7e3d596e3.tar.gz
ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines
Convert mx23/mx28 dts files to use the padconfig defintions from mxs-pinfunc.h. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Diffstat (limited to 'arch/arm/boot/dts/imx28-evk.dts')
-rw-r--r--arch/arm/boot/dts/imx28-evk.dts24
1 files changed, 12 insertions, 12 deletions
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index 023eaf7..1f63845 100644
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -79,9 +79,9 @@
MX28_PAD_AUART2_RX__GPIO_3_8
MX28_PAD_AUART2_TX__GPIO_3_9
>;
- fsl,drive-strength = <0>;
- fsl,voltage = <1>;
- fsl,pull-up = <0>;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
};
led_pin_gpio3_5: led_gpio3_5@0 {
@@ -89,9 +89,9 @@
fsl,pinmux-ids = <
MX28_PAD_AUART1_TX__GPIO_3_5
>;
- fsl,drive-strength = <0>;
- fsl,voltage = <1>;
- fsl,pull-up = <0>;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
};
gpmi_pins_evk: gpmi-nand-evk@0 {
@@ -100,9 +100,9 @@
MX28_PAD_GPMI_CE1N__GPMI_CE1N
MX28_PAD_GPMI_RDY1__GPMI_READY1
>;
- fsl,drive-strength = <0>;
- fsl,voltage = <1>;
- fsl,pull-up = <0>;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
};
lcdif_pins_evk: lcdif-evk@0 {
@@ -113,9 +113,9 @@
MX28_PAD_LCD_RS__LCD_DOTCLK
MX28_PAD_LCD_CS__LCD_ENABLE
>;
- fsl,drive-strength = <0>;
- fsl,voltage = <1>;
- fsl,pull-up = <0>;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
};
};
OpenPOWER on IntegriCloud