Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC DT updates from Olof Johansson:
 "Device tree and bindings updates for 3.12.

  General additions of various on-chip and on-board peripherals on
  various platforms as support gets added.  Some of the bigger changes
  are:

   - Addition of (new) PCI-e support on Tegra.
   - More Tegra4 support, including PMC configuration for Dalmore.
   - Addition of a new board for Exynos4 (trats2) and more bindings for
     4x12 IP.
   - Addition of Allwinner A20 and A31 SoC and board files.
   - Move of the ST Ericsson device tree files to now use ste-* prefix.
   - More move of hardware description of shmobile platforms to DT.
   - Two new board dts files for Freescale MXs"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (177 commits)
  dts: Rename DW APB timer compatible strings
  dts: Deprecate ALTR as a vendor prefix
  of: add vendor prefix for Altera Corp.
  ARM: at91/dt: sam9x5ek: add sound configuration
  ARM: at91/dt: sam9x5ek: enable SSC
  ARM: at91/dt: sam9x5ek: add WM8731 codec
  ARM: at91/dt: sam9x5: add SSC DMA parameters
  ARM: at91/dt: add at91rm9200 PQFP package version
  ARM: at91: at91rm9200: set default mmc0 pinctrl-names
  ARM: at91: at91sam9n12: correct pin number of gpio-key
  ARM: at91: at91sam9n12: add qt1070 support
  ARM: at91: at91sam9n12: add pinctrl of TWI
  ARM: at91: Add PMU support for sama5d3
  ARM: at91: at91sam9260: add missing pinctrl-names on mmc
  ARM: tegra: configure power off for Dalmore
  ARM: DT: binding fixup to align with vendor-prefixes.txt (DT)
  ARM: dts: add sdio blocks to bcm28155-ap board
  ARM: dts: align sdio numbers to HW definition
  ARM: sun7i: Add Olimex A20-Olinuxino-Micro support
  ARM: sun7i: Add Allwinner A20 DTSI
  ...

1 files changed, 8 insertions, 9 deletions

diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index 587ceef..28b5ce2 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -20,6 +20,8 @@
 		gpio2 = &gpio2;
 		serial0 = &auart0;
 		serial1 = &auart1;
+		spi0 = &ssp0;
+		spi1 = &ssp1;
 	};
 
 	cpus {
@@ -76,23 +78,21 @@
 				#size-cells = <1>;
 				reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
 				reg-names = "gpmi-nand", "bch";
-				interrupts = <13>, <56>;
-				interrupt-names = "gpmi-dma", "bch";
+				interrupts = <56>;
+				interrupt-names = "bch";
 				clocks = <&clks 34>;
 				clock-names = "gpmi_io";
 				dmas = <&dma_apbh 4>;
 				dma-names = "rx-tx";
-				fsl,gpmi-dma-channel = <4>;
 				status = "disabled";
 			};
 
 			ssp0: ssp@80010000 {
 				reg = <0x80010000 0x2000>;
-				interrupts = <15 14>;
+				interrupts = <15>;
 				clocks = <&clks 33>;
 				dmas = <&dma_apbh 1>;
 				dma-names = "rx-tx";
-				fsl,ssp-dma-channel = <1>;
 				status = "disabled";
 			};
 
@@ -366,11 +366,10 @@
 
 			ssp1: ssp@80034000 {
 				reg = <0x80034000 0x2000>;
-				interrupts = <2 20>;
+				interrupts = <2>;
 				clocks = <&clks 33>;
 				dmas = <&dma_apbh 2>;
 				dma-names = "rx-tx";
-				fsl,ssp-dma-channel = <2>;
 				status = "disabled";
 			};
 
@@ -472,7 +471,7 @@
 			auart0: serial@8006c000 {
 				compatible = "fsl,imx23-auart";
 				reg = <0x8006c000 0x2000>;
-				interrupts = <24 25 23>;
+				interrupts = <24>;
 				clocks = <&clks 32>;
 				dmas = <&dma_apbx 6>, <&dma_apbx 7>;
 				dma-names = "rx", "tx";
@@ -482,7 +481,7 @@
 			auart1: serial@8006e000 {
 				compatible = "fsl,imx23-auart";
 				reg = <0x8006e000 0x2000>;
-				interrupts = <59 60 58>;
+				interrupts = <59>;
 				clocks = <&clks 32>;
 				dmas = <&dma_apbx 8>, <&dma_apbx 9>;
 				dma-names = "rx", "tx";