summaryrefslogtreecommitdiffstats
path: root/arch/arm/Kconfig.debug
diff options
context:
space:
mode:
authorRussell King <rmk+kernel@arm.linux.org.uk>2013-07-06 14:23:30 +0100
committerRussell King <rmk+kernel@arm.linux.org.uk>2013-08-25 17:10:57 +0100
commitcce278d20340e292dbcbf25db8042baf9e2d88dd (patch)
tree0789219e356be0e7deb1e73695285d05bf5374be /arch/arm/Kconfig.debug
parent730cc26fd4652f64e52d67f3b9392d0ed4103261 (diff)
downloadop-kernel-dev-cce278d20340e292dbcbf25db8042baf9e2d88dd.zip
op-kernel-dev-cce278d20340e292dbcbf25db8042baf9e2d88dd.tar.gz
ARM: debug: clean up low level kernel debugging selection
It is silly to bury UART selection under multiple levels of choice statements, where the top level choice statement will only list about four entries when a single SoC is selected. Move the UART selection up into the top level choice statement as it was always intended to be. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'arch/arm/Kconfig.debug')
-rw-r--r--arch/arm/Kconfig.debug328
1 files changed, 191 insertions, 137 deletions
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 6e03229..9064ed4 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -376,12 +376,72 @@ choice
Say Y here if you want kernel low-level debugging support
on TI-NSPIRE CX models.
- config DEBUG_OMAP2PLUS_UART
- bool "Kernel low-level debugging messages via OMAP2PLUS UART"
+ config DEBUG_OMAP2UART1
+ bool "OMAP2/3/4 UART1 (omap2/3 sdp boards and some omap3 boards)"
depends on ARCH_OMAP2PLUS
+ select DEBUG_OMAP2PLUS_UART
help
- Say Y here if you want kernel low-level debugging support
- on OMAP2PLUS based platforms.
+ This covers at least h4, 2430sdp, 3430sdp, 3630sdp,
+ omap3 torpedo and 3530 lv som.
+
+ config DEBUG_OMAP2UART2
+ bool "Kernel low-level debugging messages via OMAP2/3/4 UART2"
+ depends on ARCH_OMAP2PLUS
+ select DEBUG_OMAP2PLUS_UART
+
+ config DEBUG_OMAP2UART3
+ bool "Kernel low-level debugging messages via OMAP2 UART3 (n8x0)"
+ depends on ARCH_OMAP2PLUS
+ select DEBUG_OMAP2PLUS_UART
+
+ config DEBUG_OMAP3UART3
+ bool "Kernel low-level debugging messages via OMAP3 UART3 (most omap3 boards)"
+ depends on ARCH_OMAP2PLUS
+ select DEBUG_OMAP2PLUS_UART
+ help
+ This covers at least cm_t3x, beagle, crane, devkit8000,
+ igep00x0, ldp, n900, n9(50), pandora, overo, touchbook,
+ and 3517evm.
+
+ config DEBUG_OMAP4UART3
+ bool "Kernel low-level debugging messages via OMAP4/5 UART3 (omap4 blaze, panda, omap5 sevm)"
+ depends on ARCH_OMAP2PLUS
+ select DEBUG_OMAP2PLUS_UART
+
+ config DEBUG_OMAP3UART4
+ bool "Kernel low-level debugging messages via OMAP36XX UART4"
+ depends on ARCH_OMAP2PLUS
+ select DEBUG_OMAP2PLUS_UART
+
+ config DEBUG_OMAP4UART4
+ bool "Kernel low-level debugging messages via OMAP4/5 UART4"
+ depends on ARCH_OMAP2PLUS
+ select DEBUG_OMAP2PLUS_UART
+
+ config DEBUG_TI81XXUART1
+ bool "Kernel low-level debugging messages via TI81XX UART1 (ti8148evm)"
+ depends on ARCH_OMAP2PLUS
+ select DEBUG_OMAP2PLUS_UART
+
+ config DEBUG_TI81XXUART2
+ bool "Kernel low-level debugging messages via TI81XX UART2"
+ depends on ARCH_OMAP2PLUS
+ select DEBUG_OMAP2PLUS_UART
+
+ config DEBUG_TI81XXUART3
+ bool "Kernel low-level debugging messages via TI81XX UART3 (ti8168evm)"
+ depends on ARCH_OMAP2PLUS
+ select DEBUG_OMAP2PLUS_UART
+
+ config DEBUG_AM33XXUART1
+ bool "Kernel low-level debugging messages via AM33XX UART1"
+ depends on ARCH_OMAP2PLUS
+ select DEBUG_OMAP2PLUS_UART
+
+ config DEBUG_ZOOM_UART
+ bool "Kernel low-level debugging messages via Zoom2/3 UART"
+ depends on ARCH_OMAP2PLUS
+ select DEBUG_OMAP2PLUS_UART
config DEBUG_PICOXCELL_UART
depends on ARCH_PICOXCELL
@@ -413,9 +473,58 @@ choice
their output to the standard serial port on the RealView
PB1176 platform.
- config DEBUG_ROCKCHIP_UART
- bool "Kernel low-level debugging messages via Rockchip UART"
+ config DEBUG_RK29_UART0
+ bool "Kernel low-level debugging messages via Rockchip RK29 UART0"
+ depends on ARCH_ROCKCHIP
+ select DEBUG_ROCKCHIP_UART
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Rockchip based platforms.
+
+ config DEBUG_RK29_UART1
+ bool "Kernel low-level debugging messages via Rockchip RK29 UART1"
+ depends on ARCH_ROCKCHIP
+ select DEBUG_ROCKCHIP_UART
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Rockchip based platforms.
+
+ config DEBUG_RK29_UART2
+ bool "Kernel low-level debugging messages via Rockchip RK29 UART2"
+ depends on ARCH_ROCKCHIP
+ select DEBUG_ROCKCHIP_UART
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Rockchip based platforms.
+
+ config DEBUG_RK3X_UART0
+ bool "Kernel low-level debugging messages via Rockchip RK3X UART0"
+ depends on ARCH_ROCKCHIP
+ select DEBUG_ROCKCHIP_UART
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Rockchip based platforms.
+
+ config DEBUG_RK3X_UART1
+ bool "Kernel low-level debugging messages via Rockchip RK3X UART1"
depends on ARCH_ROCKCHIP
+ select DEBUG_ROCKCHIP_UART
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Rockchip based platforms.
+
+ config DEBUG_RK3X_UART2
+ bool "Kernel low-level debugging messages via Rockchip RK3X UART2"
+ depends on ARCH_ROCKCHIP
+ select DEBUG_ROCKCHIP_UART
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Rockchip based platforms.
+
+ config DEBUG_RK3X_UART3
+ bool "Kernel low-level debugging messages via Rockchip RK3X UART3"
+ depends on ARCH_ROCKCHIP
+ select DEBUG_ROCKCHIP_UART
help
Say Y here if you want kernel low-level debugging support
on Rockchip based platforms.
@@ -489,9 +598,54 @@ choice
Say Y here if you want kernel low-level debugging support
on Allwinner A1X based platforms on the UART1.
- config DEBUG_TEGRA_UART
+ config TEGRA_DEBUG_UART_AUTO_ODMDATA
+ bool "Kernel low-level debugging messages via Tegra UART via ODMDATA"
depends on ARCH_TEGRA
- bool "Use Tegra UART for low-level debug"
+ select DEBUG_TEGRA_UART
+ help
+ Automatically determines which UART to use for low-level
+ debug based on the ODMDATA value. This value is part of
+ the BCT, and is written to the boot memory device using
+ nvflash, or other flashing tool. When bits 19:18 are 3,
+ then bits 17:15 indicate which UART to use; 0/1/2/3/4
+ are UART A/B/C/D/E.
+
+ config TEGRA_DEBUG_UARTA
+ bool "Kernel low-level debugging messages via Tegra UART A"
+ depends on ARCH_TEGRA
+ select DEBUG_TEGRA_UART
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Tegra based platforms.
+
+ config TEGRA_DEBUG_UARTB
+ bool "Kernel low-level debugging messages via Tegra UART B"
+ depends on ARCH_TEGRA
+ select DEBUG_TEGRA_UART
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Tegra based platforms.
+
+ config TEGRA_DEBUG_UARTC
+ bool "Kernel low-level debugging messages via Tegra UART C"
+ depends on ARCH_TEGRA
+ select DEBUG_TEGRA_UART
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Tegra based platforms.
+
+ config TEGRA_DEBUG_UARTD
+ bool "Kernel low-level debugging messages via Tegra UART D"
+ depends on ARCH_TEGRA
+ select DEBUG_TEGRA_UART
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Tegra based platforms.
+
+ config TEGRA_DEBUG_UARTE
+ bool "Kernel low-level debugging messages via Tegra UART E"
+ depends on ARCH_TEGRA
+ select DEBUG_TEGRA_UART
help
Say Y here if you want kernel low-level debugging support
on Tegra based platforms.
@@ -510,13 +664,25 @@ choice
Say Y here if you want the debug print routines to direct
their output to the uart1 port on SiRFmarco devices.
- config DEBUG_STI_UART
+ config STIH41X_DEBUG_ASC2
+ bool "Use StiH415/416 ASC2 UART for low-level debug"
+ depends on ARCH_STI
+ select DEBUG_STI_UART
+ help
+ Say Y here if you want kernel low-level debugging support
+ on STiH415/416 based platforms like b2000, which has
+ default UART wired up to ASC2.
+
+ If unsure, say N.
+
+ config STIH41X_DEBUG_SBC_ASC1
+ bool "Use StiH415/416 SBC ASC1 UART for low-level debug"
depends on ARCH_STI
- bool "Use StiH415/416 ASC for low-level debug"
+ select DEBUG_STI_UART
help
Say Y here if you want kernel low-level debugging support
- on StiH415/416 based platforms like B2000, B2020.
- It support UART2 and SBC_UART1.
+ on STiH415/416 based platforms like b2020. which has
+ default UART wired up to SBC ASC1.
If unsure, say N.
@@ -615,6 +781,10 @@ endchoice
config DEBUG_EXYNOS_UART
bool
+config DEBUG_OMAP2PLUS_UART
+ bool
+ depends on ARCH_OMAP2PLUS
+
config DEBUG_IMX_UART_PORT
int "i.MX Debug UART Port Selection" if DEBUG_IMX1_UART || \
DEBUG_IMX25_UART || \
@@ -631,133 +801,17 @@ config DEBUG_IMX_UART_PORT
Choose UART port on which kernel low-level debug messages
should be output.
-choice
- prompt "Low-level debug console UART"
- depends on DEBUG_OMAP2PLUS_UART
-
- config DEBUG_OMAP2UART1
- bool "OMAP2/3/4 UART1 (omap2/3 sdp boards and some omap3 boards)"
- help
- This covers at least h4, 2430sdp, 3430sdp, 3630sdp,
- omap3 torpedo and 3530 lv som.
-
- config DEBUG_OMAP2UART2
- bool "OMAP2/3/4 UART2"
-
- config DEBUG_OMAP2UART3
- bool "OMAP2 UART3 (n8x0)"
-
- config DEBUG_OMAP3UART3
- bool "OMAP3 UART3 (most omap3 boards)"
- help
- This covers at least cm_t3x, beagle, crane, devkit8000,
- igep00x0, ldp, n900, n9(50), pandora, overo, touchbook,
- and 3517evm.
-
- config DEBUG_OMAP4UART3
- bool "OMAP4/5 UART3 (omap4 blaze, panda, omap5 sevm)"
-
- config DEBUG_OMAP3UART4
- bool "OMAP36XX UART4"
-
- config DEBUG_OMAP4UART4
- bool "OMAP4/5 UART4"
-
- config DEBUG_TI81XXUART1
- bool "TI81XX UART1 (ti8148evm)"
-
- config DEBUG_TI81XXUART2
- bool "TI81XX UART2"
-
- config DEBUG_TI81XXUART3
- bool "TI81XX UART3 (ti8168evm)"
-
- config DEBUG_AM33XXUART1
- bool "AM33XX UART1"
-
- config DEBUG_ZOOM_UART
- bool "Zoom2/3 UART"
-endchoice
-
-choice
- prompt "Low-level debug console UART"
- depends on DEBUG_ROCKCHIP_UART
-
- config DEBUG_RK29_UART0
- bool "RK29 UART0"
-
- config DEBUG_RK29_UART1
- bool "RK29 UART1"
-
- config DEBUG_RK29_UART2
- bool "RK29 UART2"
-
- config DEBUG_RK3X_UART0
- bool "RK3X UART0"
-
- config DEBUG_RK3X_UART1
- bool "RK3X UART1"
-
- config DEBUG_RK3X_UART2
- bool "RK3X UART2"
-
- config DEBUG_RK3X_UART3
- bool "RK3X UART3"
-endchoice
-
-choice
- prompt "Low-level debug console UART"
- depends on DEBUG_LL && DEBUG_TEGRA_UART
-
- config TEGRA_DEBUG_UART_AUTO_ODMDATA
- bool "Via ODMDATA"
- help
- Automatically determines which UART to use for low-level debug based
- on the ODMDATA value. This value is part of the BCT, and is written
- to the boot memory device using nvflash, or other flashing tool.
- When bits 19:18 are 3, then bits 17:15 indicate which UART to use;
- 0/1/2/3/4 are UART A/B/C/D/E.
-
- config TEGRA_DEBUG_UARTA
- bool "UART A"
-
- config TEGRA_DEBUG_UARTB
- bool "UART B"
-
- config TEGRA_DEBUG_UARTC
- bool "UART C"
-
- config TEGRA_DEBUG_UARTD
- bool "UART D"
-
- config TEGRA_DEBUG_UARTE
- bool "UART E"
-
-endchoice
-
-choice
- prompt "Low-level debug console UART"
- depends on DEBUG_LL && DEBUG_STI_UART
-
- config STIH41X_DEBUG_ASC2
- bool "ASC2 UART"
- help
- Say Y here if you want kernel low-level debugging support
- on STiH415/416 based platforms like b2000, which has
- default UART wired up to ASC2.
-
- If unsure, say N.
-
- config STIH41X_DEBUG_SBC_ASC1
- bool "SBC ASC1 UART"
- help
- Say Y here if you want kernel low-level debugging support
- on STiH415/416 based platforms like b2020. which has
- default UART wired up to SBC ASC1.
+config DEBUG_ROCKCHIP_UART
+ bool
+ depends on ARCH_ROCKCHIP
- If unsure, say N.
+config DEBUG_TEGRA_UART
+ bool
+ depends on ARCH_TEGRA
-endchoice
+config DEBUG_STI_UART
+ bool
+ depends on ARCH_STI
config DEBUG_LL_INCLUDE
string
OpenPOWER on IntegriCloud