summaryrefslogtreecommitdiffstats
path: root/arch/arc/mm
diff options
context:
space:
mode:
authorVineet Gupta <vgupta@synopsys.com>2013-07-10 11:40:27 +0530
committerVineet Gupta <vgupta@synopsys.com>2013-08-29 17:51:15 +0530
commit4b06ff35fb1dcafbcbdcbe9ce794ab0770f2a843 (patch)
tree711b71aa5658cecbba27dd18562b5ac4d1a7ecc0 /arch/arc/mm
parentfce16bc35ae4a45634f3dc348d8d297a25c277cf (diff)
downloadop-kernel-dev-4b06ff35fb1dcafbcbdcbe9ce794ab0770f2a843.zip
op-kernel-dev-4b06ff35fb1dcafbcbdcbe9ce794ab0770f2a843.tar.gz
ARC: Code cosmetics (Nothing semantical)
* reduce editor lines taken by pt_regs * ARCompact ISA specific part of TLB Miss handlers clubbed together * cleanup some comments Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Diffstat (limited to 'arch/arc/mm')
-rw-r--r--arch/arc/mm/cache_arc700.c8
-rw-r--r--arch/arc/mm/tlbex.S131
2 files changed, 67 insertions, 72 deletions
diff --git a/arch/arc/mm/cache_arc700.c b/arch/arc/mm/cache_arc700.c
index f415d85..5a1259c 100644
--- a/arch/arc/mm/cache_arc700.c
+++ b/arch/arc/mm/cache_arc700.c
@@ -622,12 +622,12 @@ void flush_icache_range(unsigned long kstart, unsigned long kend)
/*
* General purpose helper to make I and D cache lines consistent.
* @paddr is phy addr of region
- * @vaddr is typically user or kernel vaddr (vmalloc)
- * Howver in one instance, flush_icache_range() by kprobe (for a breakpt in
+ * @vaddr is typically user vaddr (breakpoint) or kernel vaddr (vmalloc)
+ * However in one instance, when called by kprobe (for a breakpt in
* builtin kernel code) @vaddr will be paddr only, meaning CDU operation will
* use a paddr to index the cache (despite VIPT). This is fine since since a
- * built-in kernel page will not have any virtual mappings (not even kernel)
- * kprobe on loadable module is different as it will have kvaddr.
+ * builtin kernel page will not have any virtual mappings.
+ * kprobe on loadable module will be kernel vaddr.
*/
void __sync_icache_dcache(unsigned long paddr, unsigned long vaddr, int len)
{
diff --git a/arch/arc/mm/tlbex.S b/arch/arc/mm/tlbex.S
index fc34ebc..9cce00e 100644
--- a/arch/arc/mm/tlbex.S
+++ b/arch/arc/mm/tlbex.S
@@ -44,17 +44,36 @@
#include <asm/arcregs.h>
#include <asm/cache.h>
#include <asm/processor.h>
-#if (CONFIG_ARC_MMU_VER == 1)
#include <asm/tlb-mmu1.h>
-#endif
-;--------------------------------------------------------------------------
-; scratch memory to save the registers (r0-r3) used to code TLB refill Handler
-; For details refer to comments before TLBMISS_FREEUP_REGS below
+;-----------------------------------------------------------------
+; ARC700 Exception Handling doesn't auto-switch stack and it only provides
+; ONE scratch AUX reg "ARC_REG_SCRATCH_DATA0"
+;
+; For Non-SMP, the scratch AUX reg is repurposed to cache task PGD, so a
+; "global" is used to free-up FIRST core reg to be able to code the rest of
+; exception prologue (IRQ auto-disabled on Exceptions, so it's IRQ-safe).
+; Since the Fast Path TLB Miss handler is coded with 4 regs, the remaining 3
+; need to be saved as well by extending the "global" to be 4 words. Hence
+; ".size ex_saved_reg1, 16"
+; [All of this dance is to avoid stack switching for each TLB Miss, since we
+; only need to save only a handful of regs, as opposed to complete reg file]
+;
+; For ARC700 SMP, the "global" obviously can't be used for free up the FIRST
+; core reg as it will not be SMP safe.
+; Thus scratch AUX reg is used (and no longer used to cache task PGD).
+; To save the rest of 3 regs - per cpu, the global is made "per-cpu".
+; Epilogue thus has to locate the "per-cpu" storage for regs.
+; To avoid cache line bouncing the per-cpu global is aligned/sized per
+; L1_CACHE_SHIFT, despite fundamentally needing to be 12 bytes only. Hence
+; ".size ex_saved_reg1, (CONFIG_NR_CPUS << L1_CACHE_SHIFT)"
+
+; As simple as that....
;--------------------------------------------------------------------------
+; scratch memory to save [r0-r3] used to code TLB refill Handler
ARCFP_DATA ex_saved_reg1
- .align 1 << L1_CACHE_SHIFT ; IMP: Must be Cache Line aligned
+ .align 1 << L1_CACHE_SHIFT
.type ex_saved_reg1, @object
#ifdef CONFIG_SMP
.size ex_saved_reg1, (CONFIG_NR_CPUS << L1_CACHE_SHIFT)
@@ -66,6 +85,44 @@ ex_saved_reg1:
.zero 16
#endif
+.macro TLBMISS_FREEUP_REGS
+#ifdef CONFIG_SMP
+ sr r0, [ARC_REG_SCRATCH_DATA0] ; freeup r0 to code with
+ GET_CPU_ID r0 ; get to per cpu scratch mem,
+ lsl r0, r0, L1_CACHE_SHIFT ; cache line wide per cpu
+ add r0, @ex_saved_reg1, r0
+#else
+ st r0, [@ex_saved_reg1]
+ mov_s r0, @ex_saved_reg1
+#endif
+ st_s r1, [r0, 4]
+ st_s r2, [r0, 8]
+ st_s r3, [r0, 12]
+
+ ; VERIFY if the ASID in MMU-PID Reg is same as
+ ; one in Linux data structures
+
+ DBG_ASID_MISMATCH
+.endm
+
+.macro TLBMISS_RESTORE_REGS
+#ifdef CONFIG_SMP
+ GET_CPU_ID r0 ; get to per cpu scratch mem
+ lsl r0, r0, L1_CACHE_SHIFT ; each is cache line wide
+ add r0, @ex_saved_reg1, r0
+ ld_s r3, [r0,12]
+ ld_s r2, [r0, 8]
+ ld_s r1, [r0, 4]
+ lr r0, [ARC_REG_SCRATCH_DATA0]
+#else
+ mov_s r0, @ex_saved_reg1
+ ld_s r3, [r0,12]
+ ld_s r2, [r0, 8]
+ ld_s r1, [r0, 4]
+ ld_s r0, [r0]
+#endif
+.endm
+
;============================================================================
; Troubleshooting Stuff
;============================================================================
@@ -191,68 +248,6 @@ ex_saved_reg1:
#endif
.endm
-;-----------------------------------------------------------------
-; ARC700 Exception Handling doesn't auto-switch stack and it only provides
-; ONE scratch AUX reg "ARC_REG_SCRATCH_DATA0"
-;
-; For Non-SMP, the scratch AUX reg is repurposed to cache task PGD, so a
-; "global" is used to free-up FIRST core reg to be able to code the rest of
-; exception prologue (IRQ auto-disabled on Exceptions, so it's IRQ-safe).
-; Since the Fast Path TLB Miss handler is coded with 4 regs, the remaining 3
-; need to be saved as well by extending the "global" to be 4 words. Hence
-; ".size ex_saved_reg1, 16"
-; [All of this dance is to avoid stack switching for each TLB Miss, since we
-; only need to save only a handful of regs, as opposed to complete reg file]
-;
-; For ARC700 SMP, the "global" obviously can't be used for free up the FIRST
-; core reg as it will not be SMP safe.
-; Thus scratch AUX reg is used (and no longer used to cache task PGD).
-; To save the rest of 3 regs - per cpu, the global is made "per-cpu".
-; Epilogue thus has to locate the "per-cpu" storage for regs.
-; To avoid cache line bouncing the per-cpu global is aligned/sized per
-; L1_CACHE_SHIFT, despite fundamentally needing to be 12 bytes only. Hence
-; ".size ex_saved_reg1, (CONFIG_NR_CPUS << L1_CACHE_SHIFT)"
-
-; As simple as that....
-
-.macro TLBMISS_FREEUP_REGS
-#ifdef CONFIG_SMP
- sr r0, [ARC_REG_SCRATCH_DATA0] ; freeup r0 to code with
- GET_CPU_ID r0 ; get to per cpu scratch mem,
- lsl r0, r0, L1_CACHE_SHIFT ; cache line wide per cpu
- add r0, @ex_saved_reg1, r0
-#else
- st r0, [@ex_saved_reg1]
- mov_s r0, @ex_saved_reg1
-#endif
- st_s r1, [r0, 4]
- st_s r2, [r0, 8]
- st_s r3, [r0, 12]
-
- ; VERIFY if the ASID in MMU-PID Reg is same as
- ; one in Linux data structures
-
- DBG_ASID_MISMATCH
-.endm
-
-;-----------------------------------------------------------------
-.macro TLBMISS_RESTORE_REGS
-#ifdef CONFIG_SMP
- GET_CPU_ID r0 ; get to per cpu scratch mem
- lsl r0, r0, L1_CACHE_SHIFT ; each is cache line wide
- add r0, @ex_saved_reg1, r0
- ld_s r3, [r0,12]
- ld_s r2, [r0, 8]
- ld_s r1, [r0, 4]
- lr r0, [ARC_REG_SCRATCH_DATA0]
-#else
- mov_s r0, @ex_saved_reg1
- ld_s r3, [r0,12]
- ld_s r2, [r0, 8]
- ld_s r1, [r0, 4]
- ld_s r0, [r0]
-#endif
-.endm
ARCFP_CODE ;Fast Path Code, candidate for ICCM
OpenPOWER on IntegriCloud