Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver specific changes from Arnd Bergmann:
 "These changes are all driver specific and cross over between arm-soc
  contents and some other subsystem, in these cases cpufreq, crypto,
  dma, pinctrl, mailbox and usb, and the subsystem owners agreed to have
  these changes merged through arm-soc.

  As we proceed to untangle the dependencies between platform code and
  driver code, the amount of changes in this category is fortunately
  shrinking, for 3.11 we have 16 branches here and 101 non-merge
  changesets, the majority of which are for the stedma40 dma engine
  driver used in the ux500 platform.  Cleaning up that code touches
  multiple subsystems, but gets rid of the dependency in the end.

  The mailbox code moved out from mach-omap2 to drivers/mailbox is an
  intermediate step and is still omap specific at the moment.  Patches
  exist to generalize the subsystem and add other drivers with the same
  API, but those did not make it for 3.11."

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (101 commits)
  crypto: ux500: use dmaengine_submit API
  crypto: ux500: use dmaengine_prep_slave_sg API
  crypto: ux500: use dmaengine_device_control API
  crypto: ux500/crypt: add missing __iomem qualifiers
  crypto: ux500/hash: add missing static qualifiers
  crypto: ux500/hash: use readl on iomem addresses
  dmaengine: ste_dma40: Declare memcpy config as static
  ARM: ux500: Remove mop500_snowball_ethernet_clock_enable()
  ARM: ux500: Correct the EN_3v3 regulator's on/off GPIO
  ARM: ux500: Provide a AB8500 GPIO Device Tree node
  gpio: rcar: fix gpio_rcar_of_table
  gpio-rcar: Remove #ifdef CONFIG_OF around OF-specific sections
  gpio-rcar: Reference core gpio documentation in the DT bindings
  clk: exynos5250: Add enum entries for divider clock of i2s1 and i2s2
  ARM: dts: Update Samsung I2S documentation
  ARM: dts: add clock provider information for i2s controllers in Exynos5250
  ARM: dts: add Exynos audio subsystem clock controller node
  clk: samsung: register audio subsystem clocks using common clock framework
  ARM: dts: use #include for all device trees for Samsung
  pinctrl: s3c24xx: use correct header for chained_irq functions
  ...

10 files changed, 343 insertions, 71 deletions

diff --git a/Documentation/devicetree/bindings/bus/ti-gpmc.txt b/Documentation/devicetree/bindings/bus/ti-gpmc.txt
index 4b87ea1..704be93 100644
--- a/Documentation/devicetree/bindings/bus/ti-gpmc.txt
+++ b/Documentation/devicetree/bindings/bus/ti-gpmc.txt
@@ -95,7 +95,6 @@ GPMC chip-select settings properties for child nodes. All are optional.
 - gpmc,burst-wrap	Enables wrap bursting
 - gpmc,burst-read	Enables read page/burst mode
 - gpmc,burst-write	Enables write page/burst mode
-- gpmc,device-nand	Device is NAND
 - gpmc,device-width	Total width of device(s) connected to a GPMC
 			chip-select in bytes. The GPMC supports 8-bit
 			and 16-bit devices and so this property must be
diff --git a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt
new file mode 100644
index 0000000..a120180
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt
@@ -0,0 +1,64 @@
+* Samsung Audio Subsystem Clock Controller
+
+The Samsung Audio Subsystem clock controller generates and supplies clocks
+to Audio Subsystem block available in the S5PV210 and Exynos SoCs. The clock
+binding described here is applicable to all SoC's in Exynos family.
+
+Required Properties:
+
+- compatible: should be one of the following:
+  - "samsung,exynos4210-audss-clock" - controller compatible with all Exynos4 SoCs.
+  - "samsung,exynos5250-audss-clock" - controller compatible with all Exynos5 SoCs.
+
+- reg: physical base address and length of the controller's register set.
+
+- #clock-cells: should be 1.
+
+The following is the list of clocks generated by the controller. Each clock is
+assigned an identifier and client nodes use this identifier to specify the
+clock which they consume. Some of the clocks are available only on a particular
+Exynos4 SoC and this is specified where applicable.
+
+Provided clocks:
+
+Clock           ID      SoC (if specific)
+-----------------------------------------------
+
+mout_audss      0
+mout_i2s        1
+dout_srp        2
+dout_aud_bus    3
+dout_i2s        4
+srp_clk         5
+i2s_bus         6
+sclk_i2s        7
+pcm_bus         8
+sclk_pcm        9
+
+Example 1: An example of a clock controller node is listed below.
+
+clock_audss: audss-clock-controller@3810000 {
+	compatible = "samsung,exynos5250-audss-clock";
+	reg = <0x03810000 0x0C>;
+	#clock-cells = <1>;
+};
+
+Example 2: I2S controller node that consumes the clock generated by the clock
+           controller. Refer to the standard clock bindings for information
+           about 'clocks' and 'clock-names' property.
+
+i2s0: i2s@03830000 {
+	compatible = "samsung,i2s-v5";
+	reg = <0x03830000 0x100>;
+	dmas = <&pdma0 10
+		&pdma0 9
+		&pdma0 8>;
+	dma-names = "tx", "rx", "tx-sec";
+	clocks = <&clock_audss EXYNOS_I2S_BUS>,
+		<&clock_audss EXYNOS_I2S_BUS>,
+		<&clock_audss EXYNOS_SCLK_I2S>,
+		<&clock_audss EXYNOS_MOUT_AUDSS>,
+		<&clock_audss EXYNOS_MOUT_I2S>;
+	clock-names = "iis", "i2s_opclk0", "i2s_opclk1",
+	"mout_audss", "mout_i2s";
+};
diff --git a/Documentation/devicetree/bindings/dma/ste-dma40.txt b/Documentation/devicetree/bindings/dma/ste-dma40.txt
new file mode 100644
index 0000000..bea5b73
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/ste-dma40.txt
@@ -0,0 +1,66 @@
+* DMA40 DMA Controller
+
+Required properties:
+- compatible: "stericsson,dma40"
+- reg: Address range of the DMAC registers
+- reg-names: Names of the above areas to use during resource look-up
+- interrupt: Should contain the DMAC interrupt number
+- #dma-cells: must be <3>
+- memcpy-channels: Channels to be used for memcpy
+
+Optional properties:
+- dma-channels: Number of channels supported by hardware - if not present
+		the driver will attempt to obtain the information from H/W
+- disabled-channels: Channels which can not be used
+
+Example:
+
+	dma: dma-controller@801C0000 {
+		compatible = "stericsson,db8500-dma40", "stericsson,dma40";
+		reg = <0x801C0000 0x1000  0x40010000 0x800>;
+		reg-names = "base", "lcpa";
+		interrupt-parent = <&intc>;
+		interrupts = <0 25 0x4>;
+
+		#dma-cells = <2>;
+		memcpy-channels  = <56 57 58 59 60>;
+		disabled-channels  = <12>;
+		dma-channels = <8>;
+	};
+
+Clients
+Required properties:
+- dmas: Comma separated list of dma channel requests
+- dma-names: Names of the aforementioned requested channels
+
+Each dmas request consists of 4 cells:
+  1. A phandle pointing to the DMA controller
+  2. Device Type
+  3. The DMA request line number (only when 'use fixed channel' is set)
+  4. A 32bit mask specifying; mode, direction and endianess [NB: This list will grow]
+        0x00000001: Mode:
+                Logical channel when unset
+                Physical channel when set
+        0x00000002: Direction:
+                Memory to Device when unset
+                Device to Memory when set
+        0x00000004: Endianess:
+                Little endian when unset
+                Big endian when set
+        0x00000008: Use fixed channel:
+                Use automatic channel selection when unset
+                Use DMA request line number when set
+
+Example:
+
+	uart@80120000 {
+		compatible = "arm,pl011", "arm,primecell";
+		reg = <0x80120000 0x1000>;
+		interrupts = <0 11 0x4>;
+
+		dmas = <&dma 13 0 0x2>, /* Logical - DevToMem */
+		       <&dma 13 0 0x0>; /* Logical - MemToDev */
+		dma-names = "rx", "rx";
+
+		status = "disabled";
+	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-samsung.txt b/Documentation/devicetree/bindings/gpio/gpio-samsung.txt
index f1e5dfe..5375625 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-samsung.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-samsung.txt
@@ -39,46 +39,3 @@ Example:
 		#gpio-cells = <4>;
 		gpio-controller;
 	};
-
-
-Samsung S3C24XX GPIO Controller
-
-Required properties:
-- compatible: Compatible property value should be "samsung,s3c24xx-gpio".
-
-- reg: Physical base address of the controller and length of memory mapped
-  region.
-
-- #gpio-cells: Should be 3. The syntax of the gpio specifier used by client nodes
-  should be the following with values derived from the SoC user manual.
-     <[phandle of the gpio controller node]
-      [pin number within the gpio controller]
-      [mux function]
-      [flags and pull up/down]
-
-  Values for gpio specifier:
-  - Pin number: depending on the controller a number from 0 up to 15.
-  - Mux function: Depending on the SoC and the gpio bank the gpio can be set
-                  as input, output or a special function
-  - Flags and Pull Up/Down: the values to use differ for the individual SoCs
-                    example S3C2416/S3C2450:
-                            0 - Pull Up/Down Disabled.
-                            1 - Pull Down Enabled.
-                            2 - Pull Up Enabled.
-          Bit 16 (0x00010000) - Input is active low.
-  Consult the user manual for the correct values of Mux and Pull Up/Down.
-
-- gpio-controller: Specifies that the node is a gpio controller.
-- #address-cells: should be 1.
-- #size-cells: should be 1.
-
-Example:
-
-	gpa: gpio-controller@56000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "samsung,s3c24xx-gpio";
-		reg = <0x56000000 0x10>;
-		#gpio-cells = <3>;
-		gpio-controller;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt
new file mode 100644
index 0000000..cb3dc7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt
@@ -0,0 +1,46 @@
+* Renesas R-Car GPIO Controller
+
+Required Properties:
+
+  - compatible: should be one of the following.
+    - "renesas,gpio-r8a7778": for R8A7778 (R-Mobile M1) compatible GPIO controller.
+    - "renesas,gpio-r8a7779": for R8A7779 (R-Car H1) compatible GPIO controller.
+    - "renesas,gpio-r8a7790": for R8A7790 (R-Car H2) compatible GPIO controller.
+    - "renesas,gpio-rcar": for generic R-Car GPIO controller.
+
+  - reg: Base address and length of each memory resource used by the GPIO
+    controller hardware module.
+
+  - interrupt-parent: phandle of the parent interrupt controller.
+  - interrupts: Interrupt specifier for the controllers interrupt.
+
+  - gpio-controller: Marks the device node as a gpio controller.
+  - #gpio-cells: Should be 2. The first cell is the GPIO number and the second
+    cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>. Only the
+    GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.
+  - gpio-ranges: Range of pins managed by the GPIO controller.
+
+Please refer to gpio.txt in this directory for details of gpio-ranges property
+and the common GPIO bindings used by client devices.
+
+Example: R8A7779 (R-Car H1) GPIO controller nodes
+
+	gpio0: gpio@ffc40000 {
+		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+		reg = <0xffc40000 0x2c>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 141 0x4>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 0 32>;
+	};
+	...
+	gpio6: gpio@ffc46000 {
+		compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+		reg = <0xffc46000 0x2c>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 147 0x4>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-ranges = <&pfc 0 192 9>;
+	};
diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
index 6a983c1..df338cb 100644
--- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
@@ -29,6 +29,13 @@ Optional properties:
 		"bch4"		4-bit BCH ecc code
 		"bch8"		8-bit BCH ecc code
 
+ - ti,nand-xfer-type:		A string setting the data transfer type. One of:
+
+		"prefetch-polled"	Prefetch polled mode (default)
+		"polled"		Polled mode, without prefetch
+		"prefetch-dma"		Prefetch enabled sDMA mode
+		"prefetch-irq"		Prefetch enabled irq mode
+
  - elm_id:	Specifies elm device node. This is required to support BCH
  		error correction using ELM module.
 
@@ -55,6 +62,7 @@ Example for an AM33xx board:
 			reg = <0 0 0>; /* CS0, offset 0 */
 			nand-bus-width = <16>;
 			ti,nand-ecc-opt = "bch8";
+			ti,nand-xfer-type = "polled";
 
 			gpmc,sync-clk-ps = <0>;
 			gpmc,cs-on-ns = <0>;
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
index e15cfc4..72e9cd1 100644
--- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
@@ -7,6 +7,10 @@ on-chip controllers onto these pads.
 
 Required Properties:
 - compatible: should be one of the following.
+  - "samsung,s3c2412-pinctrl": for S3C2412-compatible pin-controller,
+  - "samsung,s3c2416-pinctrl": for S3C2416-compatible pin-controller,
+  - "samsung,s3c2440-pinctrl": for S3C2440-compatible pin-controller,
+  - "samsung,s3c2450-pinctrl": for S3C2450-compatible pin-controller,
   - "samsung,s3c64xx-pinctrl": for S3C64xx-compatible pin-controller,
   - "samsung,exynos4210-pinctrl": for Exynos4210 compatible pin-controller.
   - "samsung,exynos4x12-pinctrl": for Exynos4x12 compatible pin-controller.
@@ -116,6 +120,10 @@ B. External Wakeup Interrupts: For supporting external wakeup interrupts, a
 
    - compatible: identifies the type of the external wakeup interrupt controller
      The possible values are:
+     - samsung,s3c2410-wakeup-eint: represents wakeup interrupt controller
+       found on Samsung S3C24xx SoCs except S3C2412 and S3C2413,
+     - samsung,s3c2412-wakeup-eint: represents wakeup interrupt controller
+       found on Samsung S3C2412 and S3C2413 SoCs,
      - samsung,s3c64xx-wakeup-eint: represents wakeup interrupt controller
        found on Samsung S3C64xx SoCs,
      - samsung,exynos4210-wakeup-eint: represents wakeup interrupt controller
diff --git a/Documentation/devicetree/bindings/sound/samsung-i2s.txt b/Documentation/devicetree/bindings/sound/samsung-i2s.txt
index 3070046..025e66b 100644
--- a/Documentation/devicetree/bindings/sound/samsung-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/samsung-i2s.txt
@@ -8,6 +8,16 @@ Required SoC Specific Properties:
 - dmas: list of DMA controller phandle and DMA request line ordered pairs.
 - dma-names: identifier string for each DMA request line in the dmas property.
   These strings correspond 1:1 with the ordered pairs in dmas.
+- clocks: Handle to iis clock and RCLK source clk.
+- clock-names:
+  i2s0 uses some base clks from CMU and some are from audio subsystem internal
+  clock controller. The clock names for i2s0 should be "iis", "i2s_opclk0" and
+  "i2s_opclk1" as shown in the example below.
+  i2s1 and i2s2 uses clocks from CMU. The clock names for i2s1 and i2s2 should
+  be "iis" and "i2s_opclk0".
+  "iis" is the i2s bus clock and i2s_opclk0, i2s_opclk1 are sources of the root
+  clk. i2s0 has internal mux to select the source of root clk and i2s1 and i2s2
+  doesn't have any such mux.
 
 Optional SoC Specific Properties:
 
@@ -20,44 +30,26 @@ Optional SoC Specific Properties:
   then this flag is enabled.
 - samsung,idma-addr: Internal DMA register base address of the audio
   sub system(used in secondary sound source).
-
-Required Board Specific Properties:
-
-- gpios: The gpio specifier for data out,data in, LRCLK, CDCLK and SCLK
-  interface lines. The format of the gpio specifier depends on the gpio
-  controller.
-  The syntax of samsung gpio specifier is
-	<[phandle of the gpio controller node]
-	 [pin number within the gpio controller]
-	 [mux function]
-	 [flags and pull up/down]
-	 [drive strength]>
+- pinctrl-0: Should specify pin control groups used for this controller.
+- pinctrl-names: Should contain only one value - "default".
 
 Example:
 
-- SoC Specific Portion:
-
-i2s@03830000 {
+i2s0: i2s@03830000 {
 	compatible = "samsung,i2s-v5";
 	reg = <0x03830000 0x100>;
 	dmas = <&pdma0 10
 		&pdma0 9
 		&pdma0 8>;
 	dma-names = "tx", "rx", "tx-sec";
+	clocks = <&clock_audss EXYNOS_I2S_BUS>,
+		<&clock_audss EXYNOS_I2S_BUS>,
+		<&clock_audss EXYNOS_SCLK_I2S>;
+	clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
 	samsung,supports-6ch;
 	samsung,supports-rstclr;
 	samsung,supports-secdai;
 	samsung,idma-addr = <0x03000000>;
-};
-
-- Board Specific Portion:
-
-i2s@03830000 {
-	gpios = <&gpz 0 2 0 0>, /* I2S_0_SCLK */
-		<&gpz 1 2 0 0>, /* I2S_0_CDCLK */
-		<&gpz 2 2 0 0>, /* I2S_0_LRCK */
-		<&gpz 3 2 0 0>, /* I2S_0_SDI */
-		<&gpz 4 2 0 0>, /* I2S_0_SDO[1] */
-		<&gpz 5 2 0 0>, /* I2S_0_SDO[2] */
-		<&gpz 6 2 0 0>; /* I2S_0_SDO[3] */
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s0_bus>;
 };
diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt
index 60bd215..55f51af 100644
--- a/Documentation/devicetree/bindings/usb/atmel-usb.txt
+++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt
@@ -47,3 +47,85 @@ usb1: gadget@fffa4000 {
 	interrupts = <10 4>;
 	atmel,vbus-gpio = <&pioC 5 0>;
 };
+
+Atmel High-Speed USB device controller
+
+Required properties:
+ - compatible: Should be "atmel,at91sam9rl-udc"
+ - reg: Address and length of the register set for the device
+ - interrupts: Should contain usba interrupt
+ - ep childnode: To specify the number of endpoints and their properties.
+
+Optional properties:
+ - atmel,vbus-gpio: If present, specifies a gpio that needs to be
+   activated for the bus to be powered.
+
+Required child node properties:
+ - name: Name of the endpoint.
+ - reg: Num of the endpoint.
+ - atmel,fifo-size: Size of the fifo.
+ - atmel,nb-banks: Number of banks.
+ - atmel,can-dma: Boolean to specify if the endpoint support DMA.
+ - atmel,can-isoc: Boolean to specify if the endpoint support ISOC.
+
+usb2: gadget@fff78000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "atmel,at91sam9rl-udc";
+	reg = <0x00600000 0x80000
+	       0xfff78000 0x400>;
+	interrupts = <27 4 0>;
+	atmel,vbus-gpio = <&pioB 19 0>;
+
+	ep0 {
+		reg = <0>;
+		atmel,fifo-size = <64>;
+		atmel,nb-banks = <1>;
+	};
+
+	ep1 {
+		reg = <1>;
+		atmel,fifo-size = <1024>;
+		atmel,nb-banks = <2>;
+		atmel,can-dma;
+		atmel,can-isoc;
+	};
+
+	ep2 {
+		reg = <2>;
+		atmel,fifo-size = <1024>;
+		atmel,nb-banks = <2>;
+		atmel,can-dma;
+		atmel,can-isoc;
+	};
+
+	ep3 {
+		reg = <3>;
+		atmel,fifo-size = <1024>;
+		atmel,nb-banks = <3>;
+		atmel,can-dma;
+	};
+
+	ep4 {
+		reg = <4>;
+		atmel,fifo-size = <1024>;
+		atmel,nb-banks = <3>;
+		atmel,can-dma;
+	};
+
+	ep5 {
+		reg = <5>;
+		atmel,fifo-size = <1024>;
+		atmel,nb-banks = <3>;
+		atmel,can-dma;
+		atmel,can-isoc;
+	};
+
+	ep6 {
+		reg = <6>;
+		atmel,fifo-size = <1024>;
+		atmel,nb-banks = <3>;
+		atmel,can-dma;
+		atmel,can-isoc;
+	};
+};
diff --git a/Documentation/devicetree/bindings/usb/ux500-usb.txt b/Documentation/devicetree/bindings/usb/ux500-usb.txt
new file mode 100644
index 0000000..330d6ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ux500-usb.txt
@@ -0,0 +1,50 @@
+Ux500 MUSB
+
+Required properties:
+ - compatible : Should be "stericsson,db8500-musb"
+ - reg        : Offset and length of registers
+ - interrupts : Interrupt; mode, number and trigger
+ - dr_mode    : Dual-role; either host mode "host", peripheral mode "peripheral"
+                or both "otg"
+
+Optional properties:
+ - dmas       : A list of dma channels;
+                dma-controller, event-line, fixed-channel, flags
+ - dma-names  : An ordered list of channel names affiliated to the above
+
+Example:
+
+usb_per5@a03e0000 {
+	compatible = "stericsson,db8500-musb", "mentor,musb";
+	reg = <0xa03e0000 0x10000>;
+	interrupts = <0 23 0x4>;
+	interrupt-names = "mc";
+
+	dr_mode = "otg";
+
+	dmas = <&dma 38 0 0x2>, /* Logical - DevToMem */
+	       <&dma 38 0 0x0>, /* Logical - MemToDev */
+	       <&dma 37 0 0x2>, /* Logical - DevToMem */
+	       <&dma 37 0 0x0>, /* Logical - MemToDev */
+	       <&dma 36 0 0x2>, /* Logical - DevToMem */
+	       <&dma 36 0 0x0>, /* Logical - MemToDev */
+	       <&dma 19 0 0x2>, /* Logical - DevToMem */
+	       <&dma 19 0 0x0>, /* Logical - MemToDev */
+	       <&dma 18 0 0x2>, /* Logical - DevToMem */
+	       <&dma 18 0 0x0>, /* Logical - MemToDev */
+	       <&dma 17 0 0x2>, /* Logical - DevToMem */
+	       <&dma 17 0 0x0>, /* Logical - MemToDev */
+	       <&dma 16 0 0x2>, /* Logical - DevToMem */
+	       <&dma 16 0 0x0>, /* Logical - MemToDev */
+	       <&dma 39 0 0x2>, /* Logical - DevToMem */
+	       <&dma 39 0 0x0>; /* Logical - MemToDev */
+
+	dma-names = "iep_1_9",  "oep_1_9",
+		    "iep_2_10", "oep_2_10",
+		    "iep_3_11", "oep_3_11",
+		    "iep_4_12", "oep_4_12",
+		    "iep_5_13", "oep_5_13",
+		    "iep_6_14", "oep_6_14",
+		    "iep_7_15", "oep_7_15",
+		    "iep_8",    "oep_8";
+};