Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.26

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.26: (1090 commits)
  [NET]: Fix and allocate less memory for ->priv'less netdevices
  [IPV6]: Fix dangling references on error in fib6_add().
  [NETLABEL]: Fix NULL deref in netlbl_unlabel_staticlist_gen() if ifindex not found
  [PKT_SCHED]: Fix datalen check in tcf_simp_init().
  [INET]: Uninline the __inet_inherit_port call.
  [INET]: Drop the inet_inherit_port() call.
  SCTP: Initialize partial_bytes_acked to 0, when all of the data is acked.
  [netdrvr] forcedeth: internal simplifications; changelog removal
  phylib: factor out get_phy_id from within get_phy_device
  PHY: add BCM5464 support to broadcom PHY driver
  cxgb3: Fix __must_check warning with dev_dbg.
  tc35815: Statistics cleanup
  natsemi: fix MMIO for PPC 44x platforms
  [TIPC]: Cleanup of TIPC reference table code
  [TIPC]: Optimized initialization of TIPC reference table
  [TIPC]: Remove inlining of reference table locking routines
  e1000: convert uint16_t style integers to u16
  ixgb: convert uint16_t style integers to u16
  sb1000.c: make const arrays static
  sb1000.c: stop inlining largish static functions
  ...

7 files changed, 338 insertions, 751 deletions

diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index e471bc4..b2b6366 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -11,7 +11,8 @@ DOCBOOKS := wanbook.xml z8530book.xml mcabook.xml videobook.xml \
 	    procfs-guide.xml writing_usb_driver.xml networking.xml \
 	    kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \
 	    gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \
-	    genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml
+	    genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \
+	    mac80211.xml
 
 ###
 # The build process is as follows (targets):
diff --git a/Documentation/DocBook/mac80211.tmpl b/Documentation/DocBook/mac80211.tmpl
new file mode 100644
index 0000000..b651e0a
--- /dev/null
+++ b/Documentation/DocBook/mac80211.tmpl
@@ -0,0 +1,335 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+
+<book id="mac80211-developers-guide">
+  <bookinfo>
+    <title>The mac80211 subsystem for kernel developers</title>
+
+    <authorgroup>
+      <author>
+        <firstname>Johannes</firstname>
+        <surname>Berg</surname>
+        <affiliation>
+          <address><email>johannes@sipsolutions.net</email></address>
+        </affiliation>
+      </author>
+    </authorgroup>
+
+    <copyright>
+      <year>2007</year>
+      <year>2008</year>
+      <holder>Johannes Berg</holder>
+    </copyright>
+
+    <legalnotice>
+      <para>
+        This documentation is free software; you can redistribute
+        it and/or modify it under the terms of the GNU General Public
+        License version 2 as published by the Free Software Foundation.
+      </para>
+
+      <para>
+        This documentation is distributed in the hope that it will be
+        useful, but WITHOUT ANY WARRANTY; without even the implied
+        warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+        See the GNU General Public License for more details.
+      </para>
+
+      <para>
+        You should have received a copy of the GNU General Public
+        License along with this documentation; if not, write to the Free
+        Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+        MA 02111-1307 USA
+      </para>
+
+      <para>
+        For more details see the file COPYING in the source
+        distribution of Linux.
+      </para>
+    </legalnotice>
+
+    <abstract>
+!Pinclude/net/mac80211.h Introduction
+!Pinclude/net/mac80211.h Warning
+    </abstract>
+  </bookinfo>
+
+  <toc></toc>
+
+<!--
+Generally, this document shall be ordered by increasing complexity.
+It is important to note that readers should be able to read only
+the first few sections to get a working driver and only advanced
+usage should require reading the full document.
+-->
+
+  <part>
+    <title>The basic mac80211 driver interface</title>
+    <partintro>
+      <para>
+        You should read and understand the information contained
+        within this part of the book while implementing a driver.
+        In some chapters, advanced usage is noted, that may be
+        skipped at first.
+      </para>
+      <para>
+        This part of the book only covers station and monitor mode
+        functionality, additional information required to implement
+        the other modes is covered in the second part of the book.
+      </para>
+    </partintro>
+
+    <chapter id="basics">
+      <title>Basic hardware handling</title>
+      <para>TBD</para>
+      <para>
+        This chapter shall contain information on getting a hw
+        struct allocated and registered with mac80211.
+      </para>
+      <para>
+        Since it is required to allocate rates/modes before registering
+        a hw struct, this chapter shall also contain information on setting
+        up the rate/mode structs.
+      </para>
+      <para>
+        Additionally, some discussion about the callbacks and
+        the general programming model should be in here, including
+        the definition of ieee80211_ops which will be referred to
+        a lot.
+      </para>
+      <para>
+        Finally, a discussion of hardware capabilities should be done
+        with references to other parts of the book.
+      </para>
+<!-- intentionally multiple !F lines to get proper order -->
+!Finclude/net/mac80211.h ieee80211_hw
+!Finclude/net/mac80211.h ieee80211_hw_flags
+!Finclude/net/mac80211.h SET_IEEE80211_DEV
+!Finclude/net/mac80211.h SET_IEEE80211_PERM_ADDR
+!Finclude/net/mac80211.h ieee80211_ops
+!Finclude/net/mac80211.h ieee80211_alloc_hw
+!Finclude/net/mac80211.h ieee80211_register_hw
+!Finclude/net/mac80211.h ieee80211_get_tx_led_name
+!Finclude/net/mac80211.h ieee80211_get_rx_led_name
+!Finclude/net/mac80211.h ieee80211_get_assoc_led_name
+!Finclude/net/mac80211.h ieee80211_get_radio_led_name
+!Finclude/net/mac80211.h ieee80211_unregister_hw
+!Finclude/net/mac80211.h ieee80211_free_hw
+    </chapter>
+
+    <chapter id="phy-handling">
+      <title>PHY configuration</title>
+      <para>TBD</para>
+      <para>
+        This chapter should describe PHY handling including
+        start/stop callbacks and the various structures used.
+      </para>
+!Finclude/net/mac80211.h ieee80211_conf
+!Finclude/net/mac80211.h ieee80211_conf_flags
+    </chapter>
+
+    <chapter id="iface-handling">
+      <title>Virtual interfaces</title>
+      <para>TBD</para>
+      <para>
+        This chapter should describe virtual interface basics
+        that are relevant to the driver (VLANs, MGMT etc are not.)
+        It should explain the use of the add_iface/remove_iface
+        callbacks as well as the interface configuration callbacks.
+      </para>
+      <para>Things related to AP mode should be discussed there.</para>
+      <para>
+        Things related to supporting multiple interfaces should be
+        in the appropriate chapter, a BIG FAT note should be here about
+        this though and the recommendation to allow only a single
+        interface in STA mode at first!
+      </para>
+!Finclude/net/mac80211.h ieee80211_if_types
+!Finclude/net/mac80211.h ieee80211_if_init_conf
+!Finclude/net/mac80211.h ieee80211_if_conf
+    </chapter>
+
+    <chapter id="rx-tx">
+      <title>Receive and transmit processing</title>
+      <sect1>
+        <title>what should be here</title>
+        <para>TBD</para>
+        <para>
+          This should describe the receive and transmit
+          paths in mac80211/the drivers as well as
+          transmit status handling.
+        </para>
+      </sect1>
+      <sect1>
+        <title>Frame format</title>
+!Pinclude/net/mac80211.h Frame format
+      </sect1>
+      <sect1>
+        <title>Alignment issues</title>
+        <para>TBD</para>
+      </sect1>
+      <sect1>
+        <title>Calling into mac80211 from interrupts</title>
+!Pinclude/net/mac80211.h Calling mac80211 from interrupts
+      </sect1>
+      <sect1>
+        <title>functions/definitions</title>
+!Finclude/net/mac80211.h ieee80211_rx_status
+!Finclude/net/mac80211.h mac80211_rx_flags
+!Finclude/net/mac80211.h ieee80211_tx_control
+!Finclude/net/mac80211.h ieee80211_tx_status_flags
+!Finclude/net/mac80211.h ieee80211_rx
+!Finclude/net/mac80211.h ieee80211_rx_irqsafe
+!Finclude/net/mac80211.h ieee80211_tx_status
+!Finclude/net/mac80211.h ieee80211_tx_status_irqsafe
+!Finclude/net/mac80211.h ieee80211_rts_get
+!Finclude/net/mac80211.h ieee80211_rts_duration
+!Finclude/net/mac80211.h ieee80211_ctstoself_get
+!Finclude/net/mac80211.h ieee80211_ctstoself_duration
+!Finclude/net/mac80211.h ieee80211_generic_frame_duration
+!Finclude/net/mac80211.h ieee80211_get_hdrlen_from_skb
+!Finclude/net/mac80211.h ieee80211_get_hdrlen
+!Finclude/net/mac80211.h ieee80211_wake_queue
+!Finclude/net/mac80211.h ieee80211_stop_queue
+!Finclude/net/mac80211.h ieee80211_start_queues
+!Finclude/net/mac80211.h ieee80211_stop_queues
+!Finclude/net/mac80211.h ieee80211_wake_queues
+      </sect1>
+    </chapter>
+
+    <chapter id="filters">
+      <title>Frame filtering</title>
+!Pinclude/net/mac80211.h Frame filtering
+!Finclude/net/mac80211.h ieee80211_filter_flags
+    </chapter>
+  </part>
+
+  <part id="advanced">
+    <title>Advanced driver interface</title>
+    <partintro>
+      <para>
+       Information contained within this part of the book is
+       of interest only for advanced interaction of mac80211
+       with drivers to exploit more hardware capabilities and
+       improve performance.
+      </para>
+    </partintro>
+
+    <chapter id="hardware-crypto-offload">
+      <title>Hardware crypto acceleration</title>
+!Pinclude/net/mac80211.h Hardware crypto acceleration
+<!-- intentionally multiple !F lines to get proper order -->
+!Finclude/net/mac80211.h set_key_cmd
+!Finclude/net/mac80211.h ieee80211_key_conf
+!Finclude/net/mac80211.h ieee80211_key_alg
+!Finclude/net/mac80211.h ieee80211_key_flags
+    </chapter>
+
+    <chapter id="qos">
+      <title>Multiple queues and QoS support</title>
+      <para>TBD</para>
+!Finclude/net/mac80211.h ieee80211_tx_queue_params
+!Finclude/net/mac80211.h ieee80211_tx_queue_stats_data
+!Finclude/net/mac80211.h ieee80211_tx_queue
+    </chapter>
+
+    <chapter id="AP">
+      <title>Access point mode support</title>
+      <para>TBD</para>
+      <para>Some parts of the if_conf should be discussed here instead</para>
+      <para>
+        Insert notes about VLAN interfaces with hw crypto here or
+        in the hw crypto chapter.
+      </para>
+!Finclude/net/mac80211.h ieee80211_get_buffered_bc
+!Finclude/net/mac80211.h ieee80211_beacon_get
+    </chapter>
+
+    <chapter id="multi-iface">
+      <title>Supporting multiple virtual interfaces</title>
+      <para>TBD</para>
+      <para>
+        Note: WDS with identical MAC address should almost always be OK
+      </para>
+      <para>
+        Insert notes about having multiple virtual interfaces with
+        different MAC addresses here, note which configurations are
+        supported by mac80211, add notes about supporting hw crypto
+        with it.
+      </para>
+    </chapter>
+
+    <chapter id="hardware-scan-offload">
+      <title>Hardware scan offload</title>
+      <para>TBD</para>
+!Finclude/net/mac80211.h ieee80211_scan_completed
+    </chapter>
+  </part>
+
+  <part id="rate-control">
+    <title>Rate control interface</title>
+    <partintro>
+      <para>TBD</para>
+      <para>
+       This part of the book describes the rate control algorithm
+       interface and how it relates to mac80211 and drivers.
+      </para>
+    </partintro>
+    <chapter id="dummy">
+      <title>dummy chapter</title>
+      <para>TBD</para>
+    </chapter>
+  </part>
+
+  <part id="internal">
+    <title>Internals</title>
+    <partintro>
+      <para>TBD</para>
+      <para>
+       This part of the book describes mac80211 internals.
+      </para>
+    </partintro>
+
+    <chapter id="key-handling">
+      <title>Key handling</title>
+      <sect1>
+        <title>Key handling basics</title>
+!Pnet/mac80211/key.c Key handling basics
+      </sect1>
+      <sect1>
+        <title>MORE TBD</title>
+        <para>TBD</para>
+      </sect1>
+    </chapter>
+
+    <chapter id="rx-processing">
+      <title>Receive processing</title>
+      <para>TBD</para>
+    </chapter>
+
+    <chapter id="tx-processing">
+      <title>Transmit processing</title>
+      <para>TBD</para>
+    </chapter>
+
+    <chapter id="sta-info">
+      <title>Station info handling</title>
+      <sect1>
+        <title>Programming information</title>
+!Fnet/mac80211/sta_info.h sta_info
+!Fnet/mac80211/sta_info.h ieee80211_sta_info_flags
+      </sect1>
+      <sect1>
+        <title>STA information lifetime rules</title>
+!Pnet/mac80211/sta_info.c STA information lifetime rules
+      </sect1>
+    </chapter>
+
+    <chapter id="synchronisation">
+      <title>Synchronisation</title>
+      <para>TBD</para>
+      <para>Locking, lots of RCU</para>
+    </chapter>
+  </part>
+</book>
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 4b70622..af0e939 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -203,14 +203,6 @@ Who:  linuxppc-dev@ozlabs.org
 
 ---------------------------
 
-What:   sk98lin network driver
-When:   Feburary 2008
-Why:    In kernel tree version of driver is unmaintained. Sk98lin driver
-	replaced by the skge driver. 
-Who:    Stephen Hemminger <shemminger@linux-foundation.org>
-
----------------------------
-
 What:	i386/x86_64 bzImage symlinks
 When:	April 2010
 
@@ -221,8 +213,6 @@ Who:	Thomas Gleixner <tglx@linutronix.de>
 
 ---------------------------
 
----------------------------
-
 What:	i2c-i810, i2c-prosavage and i2c-savage4
 When:	May 2008
 Why:	These drivers are superseded by i810fb, intelfb and savagefb.
@@ -230,33 +220,6 @@ Who:	Jean Delvare <khali@linux-fr.org>
 
 ---------------------------
 
-What:	bcm43xx wireless network driver
-When:	2.6.26
-Files:	drivers/net/wireless/bcm43xx
-Why:	This driver's functionality has been replaced by the
-	mac80211-based b43 and b43legacy drivers.
-Who:	John W. Linville <linville@tuxdriver.com>
-
----------------------------
-
-What:	ieee80211 softmac wireless networking component
-When:	2.6.26 (or after removal of bcm43xx and port of zd1211rw to mac80211)
-Files:	net/ieee80211/softmac
-Why:	No in-kernel drivers will depend on it any longer.
-Who:	John W. Linville <linville@tuxdriver.com>
-
----------------------------
-
-What:	rc80211-simple rate control algorithm for mac80211
-When:	2.6.26
-Files:	net/mac80211/rc80211-simple.c
-Why:	This algorithm was provided for reference but always exhibited bad
-	responsiveness and performance and has some serious flaws. It has been
-	replaced by rc80211-pid.
-Who:	Stefano Brivio <stefano.brivio@polimi.it>
-
----------------------------
-
 What (Why):
 	- include/linux/netfilter_ipv4/ipt_TOS.h ipt_tos.h header files
 	  (superseded by xt_TOS/xt_tos target & match)
diff --git a/Documentation/laptops/acer-wmi.txt b/Documentation/laptops/acer-wmi.txt
index 23df051..79b7dbd 100644
--- a/Documentation/laptops/acer-wmi.txt
+++ b/Documentation/laptops/acer-wmi.txt
@@ -80,7 +80,7 @@ once you enable the radio, will depend on your hardware and driver combination.
 e.g. With the BCM4318 on the Acer Aspire 5020 series:
 
 ndiswrapper: Light blinks on when transmitting
-bcm43xx/b43: Solid light, blinks off when transmitting
+b43: Solid light, blinks off when transmitting
 
 Wireless radio control is unconditionally enabled - all Acer laptops that support
 acer-wmi come with built-in wireless. However, should you feel so inclined to
diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX
index c485ee0..1634c6dc 100644
--- a/Documentation/networking/00-INDEX
+++ b/Documentation/networking/00-INDEX
@@ -100,8 +100,6 @@ tuntap.txt
 	- TUN/TAP device driver, allowing user space Rx/Tx of packets.
 vortex.txt
 	- info on using 3Com Vortex (3c590, 3c592, 3c595, 3c597) Ethernet cards.
-wan-router.txt
-	- WAN router documentation
 wavelan.txt
 	- AT&T GIS (nee NCR) WaveLAN card: An Ethernet-like radio transceiver
 x25.txt
diff --git a/Documentation/networking/bcm43xx.txt b/Documentation/networking/bcm43xx.txt
deleted file mode 100644
index d602c8d..0000000
--- a/Documentation/networking/bcm43xx.txt
+++ /dev/null
@@ -1,89 +0,0 @@
-
-			BCM43xx Linux Driver Project
-			============================
-
-Introduction
-------------
-
-Many of the wireless devices found in modern notebook computers are
-based on the wireless chips produced by Broadcom. These devices have
-been a problem for Linux users as there is no open-source driver
-available. In addition, Broadcom has not released specifications
-for the device, and driver availability has been limited to the
-binary-only form used in the GPL versions of AP hardware such as the
-Linksys WRT54G, and the Windows and OS X drivers.  Before this project
-began, the only way to use these devices were to use the Windows or
-OS X drivers with either the Linuxant or ndiswrapper modules. There
-is a strong penalty if this method is used as loading the binary-only
-module "taints" the kernel, and no kernel developer will help diagnose
-any kernel problems.
-
-Development
------------
-
-This driver has been developed using
-a clean-room technique that is described at
-http://bcm-specs.sipsolutions.net/ReverseEngineeringProcess. For legal
-reasons, none of the clean-room crew works on the on the Linux driver,
-and none of the Linux developers sees anything but the specifications,
-which are the ultimate product of the reverse-engineering group.
-
-Software
---------
-
-Since the release of the 2.6.17 kernel, the bcm43xx driver has been
-distributed with the kernel source, and is prebuilt in most, if not
-all, distributions.  There is, however, additional software that is
-required. The firmware used by the chip is the intellectual property
-of Broadcom and they have not given the bcm43xx team redistribution
-rights to this firmware.  Since we cannot legally redistribute
-the firmware we cannot include it with the driver. Furthermore, it
-cannot be placed in the downloadable archives of any distributing
-organization; therefore, the user is responsible for obtaining the
-firmware and placing it in the appropriate location so that the driver
-can find it when initializing.
-
-To help with this process, the bcm43xx developers provide a separate
-program named bcm43xx-fwcutter to "cut" the firmware out of a
-Windows or OS X driver and write the extracted files to the proper
-location. This program is usually provided with the distribution;
-however, it may be downloaded from
-
-http://developer.berlios.de/project/showfiles.php?group_id=4547
-
-The firmware is available in two versions. V3 firmware is used with
-the in-kernel bcm43xx driver that uses a software MAC layer called
-SoftMAC, and will have a microcode revision of 0x127 or smaller. The
-V4 firmware is used by an out-of-kernel driver employing a variation of
-the Devicescape MAC layer known as d80211. Once bcm43xx-d80211 reaches
-a satisfactory level of development, it will replace bcm43xx-softmac
-in the kernel as it is much more flexible and powerful.
-
-A source for the latest V3 firmware is
-
-http://downloads.openwrt.org/sources/wl_apsta-3.130.20.0.o
-
-Once this file is downloaded, the command
-'bcm43xx-fwcutter -w <dir> <filename>'
-will extract the microcode and write it to directory
-<dir>. The correct directory will depend on your distribution;
-however, most use '/lib/firmware'. Once this step is completed,
-the bcm3xx driver should load when the system is booted. To see
-any messages relating to the driver, issue the command 'dmesg |
-grep bcm43xx' from a terminal window. If there are any problems,
-please send that output to Bcm43xx-dev@lists.berlios.de.
-
-Although the driver has been in-kernel since 2.6.17, the earliest
-version is quite limited in its capability. Patches that include
-all features of later versions are available for the stable kernel
-versions from 2.6.18. These will be needed if you use a BCM4318,
-or a PCI Express version (BCM4311 and BCM4312). In addition, if you
-have an early BCM4306 and more than 1 GB RAM, your kernel will need
-to be patched.	These patches, which are being updated regularly,
-are available at ftp://lwfinger.dynalias.org/patches. Look for
-combined_2.6.YY.patch. Of course you will need kernel source downloaded
-from kernel.org, or the source from your distribution.
-
-If you build your own kernel, please enable CONFIG_BCM43XX_DEBUG
-and CONFIG_IEEE80211_SOFTMAC_DEBUG. The log information provided is
-essential for solving any problems.
diff --git a/Documentation/networking/wan-router.txt b/Documentation/networking/wan-router.txt
deleted file mode 100644
index bc2ab41..0000000
--- a/Documentation/networking/wan-router.txt
+++ /dev/null
@@ -1,621 +0,0 @@
-------------------------------------------------------------------------------
-Linux WAN Router Utilities Package
-------------------------------------------------------------------------------
-Version 2.2.1 
-Mar 28, 2001
-Author: Nenad Corbic <ncorbic@sangoma.com>
-Copyright (c) 1995-2001 Sangoma Technologies Inc.
-------------------------------------------------------------------------------
-
-INTRODUCTION
-
-Wide Area Networks (WANs) are used to interconnect Local Area Networks (LANs)
-and/or stand-alone hosts over vast distances with data transfer rates
-significantly higher than those achievable with commonly used dial-up
-connections.
-
-Usually an external device called `WAN router' sitting on your local network
-or connected to your machine's serial port provides physical connection to
-WAN.  Although router's job may be as simple as taking your local network
-traffic, converting it to WAN format and piping it through the WAN link, these
-devices are notoriously expensive, with prices as much as 2 - 5 times higher
-then the price of a typical PC box.
-
-Alternatively, considering robustness and multitasking capabilities of Linux,
-an internal router can be built (most routers use some sort of stripped down
-Unix-like operating system anyway). With a number of relatively inexpensive WAN
-interface cards available on the market, a perfectly usable router can be
-built for less than half a price of an external router.  Yet a Linux box
-acting as a router can still be used for other purposes, such as fire-walling,
-running FTP, WWW or DNS server, etc.
-
-This kernel module introduces the notion of a WAN Link Driver (WLD) to Linux
-operating system and provides generic hardware-independent services for such
-drivers.  Why can existing Linux network device interface not be used for
-this purpose?  Well, it can.  However, there are a few key differences between
-a typical network interface (e.g. Ethernet) and a WAN link.
-
-Many WAN protocols, such as X.25 and frame relay, allow for multiple logical
-connections (known as `virtual circuits' in X.25 terminology) over a single
-physical link.  Each such virtual circuit may (and almost always does) lead
-to a different geographical location and, therefore, different network.  As a
-result, it is the virtual circuit, not the physical link, that represents a
-route and, therefore, a network interface in Linux terms.
-
-To further complicate things, virtual circuits are usually volatile in nature
-(excluding so called `permanent' virtual circuits or PVCs).  With almost no
-time required to set up and tear down a virtual circuit, it is highly desirable
-to implement on-demand connections in order to minimize network charges.  So
-unlike a typical network driver, the WAN driver must be able to handle multiple
-network interfaces and cope as multiple virtual circuits come into existence
-and go away dynamically.
- 
-Last, but not least, WAN configuration is much more complex than that of say
-Ethernet and may well amount to several dozens of parameters.  Some of them
-are "link-wide"  while others are virtual circuit-specific.  The same holds
-true for WAN statistics which is by far more extensive and extremely useful
-when troubleshooting WAN connections.  Extending the ifconfig utility to suit
-these needs may be possible, but does not seem quite reasonable.  Therefore, a
-WAN configuration utility and corresponding application programmer's interface
-is needed for this purpose.
-
-Most of these problems are taken care of by this module.  Its goal is to
-provide a user with more-or-less standard look and feel for all WAN devices and
-assist a WAN device driver writer by providing common services, such as:
-
- o User-level interface via /proc file system
- o Centralized configuration
- o Device management (setup, shutdown, etc.)
- o Network interface management (dynamic creation/destruction)
- o Protocol encapsulation/decapsulation
-
-To ba able to use the Linux WAN Router you will also need a WAN Tools package
-available from
-
-	ftp.sangoma.com/pub/linux/current_wanpipe/wanpipe-X.Y.Z.tgz
-
-where vX.Y.Z represent the wanpipe version number.
-
-For technical questions and/or comments please e-mail to ncorbic@sangoma.com.
-For general inquiries please contact Sangoma Technologies Inc. by
-
-	Hotline:	1-800-388-2475	(USA and Canada, toll free)
-	Phone:		(905) 474-1990  ext: 106
-	Fax:		(905) 474-9223
-	E-mail:		dm@sangoma.com	(David Mandelstam)
-	WWW:		http://www.sangoma.com
-
-
-INSTALLATION
-
-Please read the WanpipeForLinux.pdf manual on how to 
-install the WANPIPE tools and drivers properly. 
-
-
-After installing wanpipe package: /usr/local/wanrouter/doc. 
-On the ftp.sangoma.com : /linux/current_wanpipe/doc
-
-
-COPYRIGHT AND LICENSING INFORMATION
-
-This program is free software; you can redistribute it and/or modify it under
-the terms of the GNU General Public License as published by the Free Software
-Foundation; either version 2, or (at your option) any later version.
-
-This program is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
-FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License along with
-this program; if not, write to the Free Software Foundation, Inc., 675 Mass
-Ave, Cambridge, MA 02139, USA.
-
-
-
-ACKNOWLEDGEMENTS
-
-This product is based on the WANPIPE(tm) Multiprotocol WAN Router developed
-by Sangoma Technologies Inc. for Linux 2.0.x and 2.2.x.  Success of the WANPIPE
-together with the next major release of Linux kernel in summer 1996 commanded
-adequate changes to the WANPIPE code to take full advantage of new Linux
-features.
-
-Instead of continuing developing proprietary interface tied to Sangoma WAN
-cards, we decided to separate all hardware-independent code into a separate
-module and defined two levels of interfaces - one for user-level applications
-and another for kernel-level WAN drivers.  WANPIPE is now implemented as a
-WAN driver compliant with the WAN Link Driver interface.  Also a general
-purpose WAN configuration utility and a set of shell scripts was developed to 
-support WAN router at the user level.
-
-Many useful ideas concerning hardware-independent interface implementation
-were given by Mike McLagan <mike.mclagan@linux.org> and his implementation
-of the Frame Relay router and drivers for Sangoma cards (dlci/sdla).
-
-With the new implementation of the APIs being incorporated into the WANPIPE,
-a special thank goes to Alan Cox in providing insight into BSD sockets.
-
-Special thanks to all the WANPIPE users who performed field-testing, reported
-bugs and made valuable comments and suggestions that help us to improve this
-product.
-
-
-
-NEW IN THIS RELEASE
-
-	o Updated the WANCFG utility
-		Calls the pppconfig to configure the PPPD
-		for async connections.
-
-	o Added the PPPCONFIG utility
-		Used to configure the PPPD daemon for the
-		WANPIPE Async PPP and standard serial port.
-		The wancfg calls the pppconfig to configure
-		the pppd.
-
-	o Fixed the PCI autodetect feature.  
-		The SLOT 0 was used as an autodetect option
-		however, some high end PC's slot numbers start
-		from 0. 
-
-	o This release has been tested with the new backupd
-	  daemon release.
-	
-
-PRODUCT COMPONENTS AND RELATED FILES
-
-/etc: (or user defined)
-	wanpipe1.conf	default router configuration file
-
-/lib/modules/X.Y.Z/misc:
-	wanrouter.o	router kernel loadable module
-	af_wanpipe.o	wanpipe api socket module
-
-/lib/modules/X.Y.Z/net:
-	sdladrv.o	Sangoma SDLA support module
-	wanpipe.o	Sangoma WANPIPE(tm) driver module
-
-/proc/net/wanrouter
-	Config		reads current router configuration
-	Status		reads current router status
-	{name}		reads WAN driver statistics
-
-/usr/sbin:
-	wanrouter	wanrouter start-up script
-	wanconfig	wanrouter configuration utility
-	sdladump	WANPIPE adapter memory dump utility
-        fpipemon        Monitor for Frame Relay
-        cpipemon        Monitor for Cisco HDLC
-	ppipemon 	Monitor for PPP
-	xpipemon 	Monitor for X25
-	wpkbdmon        WANPIPE keyboard led monitor/debugger
-
-/usr/local/wanrouter:
-	README		this file
-	COPYING		GNU General Public License
-	Setup		installation script
-	Filelist	distribution definition file
-	wanrouter.rc	meta-configuration file 
-			(used by the Setup and wanrouter script)
-
-/usr/local/wanrouter/doc:
-	wanpipeForLinux.pdf 	WAN Router User's Manual
-
-/usr/local/wanrouter/patches:
-	wanrouter-v2213.gz  	patch for Linux kernels 2.2.11 up to 2.2.13.
-	wanrouter-v2214.gz	patch for Linux kernel 2.2.14. 
-	wanrouter-v2215.gz	patch for Linux kernels 2.2.15 to 2.2.17.
-	wanrouter-v2218.gz	patch for Linux kernels 2.2.18 and up.
-	wanrouter-v240.gz	patch for Linux kernel 2.4.0.  
-	wanrouter-v242.gz	patch for Linux kernel 2.4.2 and up.
-	wanrouter-v2034.gz	patch for Linux kernel 2.0.34
-	wanrouter-v2036.gz 	patch for Linux kernel 2.0.36 and up. 
-
-/usr/local/wanrouter/patches/kdrivers:
-	Sources of the latest WANPIPE device drivers.
-	These are used to UPGRADE the linux kernel to the newest
-	version if the kernel source has already been patched with
-	WANPIPE drivers.
-
-/usr/local/wanrouter/samples:
-	interface	sample interface configuration file
-	wanpipe1.cpri 	CHDLC primary port
-     	wanpipe2.csec 	CHDLC secondary port
-     	wanpipe1.fr   	Frame Relay protocol
-     	wanpipe1.ppp  	PPP protocol ) 
-	wanpipe1.asy	CHDLC ASYNC protocol
-	wanpipe1.x25	X25 protocol
-	wanpipe1.stty	Sync TTY driver (Used by Kernel PPPD daemon)
-	wanpipe1.atty	Async TTY driver (Used by Kernel PPPD daemon)
-	wanrouter.rc	sample meta-configuration file
-
-/usr/local/wanrouter/util:
-	*		wan-tools utilities source code
-
-/usr/local/wanrouter/api/x25:
-	*		x25 api sample programs.
-/usr/local/wanrouter/api/chdlc:
-	*		chdlc api sample programs.
-/usr/local/wanrouter/api/fr:
-	*		fr api sample programs.
-/usr/local/wanrouter/config/wancfg:
-	wancfg		WANPIPE GUI configuration program.
-                        Creates wanpipe#.conf files. 
-/usr/local/wanrouter/config/cfgft1:
-	cfgft1		GUI CSU/DSU configuration program.
-
-/usr/include/linux:
-	wanrouter.h	router API definitions
-	wanpipe.h	WANPIPE API definitions
-	sdladrv.h	SDLA support module API definitions
-	sdlasfm.h	SDLA firmware module definitions
-	if_wanpipe.h	WANPIPE Socket definitions
-	sdlapci.h	WANPIPE PCI definitions
-	
-
-/usr/src/linux/net/wanrouter:
-	*		wanrouter source code
-
-/var/log:
-	wanrouter	wanrouter start-up log (created by the Setup script)
-
-/var/lock:  (or /var/lock/subsys for RedHat)
-	wanrouter	wanrouter lock file (created by the Setup script)
-
-/usr/local/wanrouter/firmware:
-	fr514.sfm	Frame relay firmware for Sangoma S508/S514 card
-	cdual514.sfm	Dual Port Cisco HDLC firmware for Sangoma S508/S514 card
-	ppp514.sfm      PPP Firmware for Sangoma S508 and S514 cards
-	x25_508.sfm	X25 Firmware for Sangoma S508 card.
-
-
-REVISION HISTORY
-
-1.0.0	December 31, 1996	Initial version
-
-1.0.1	January 30, 1997	Status and statistics can be read via /proc
-				filesystem entries.
-
-1.0.2   April 30, 1997          Added UDP management via monitors.
-
-1.0.3	June 3, 1997		UDP management for multiple boards using Frame
-				Relay and PPP
-				Enabled continuous transmission of Configure 
-				Request Packet for PPP (for 508 only)
-				Connection Timeout for PPP changed from 900 to 0
-				Flow Control Problem fixed for Frame Relay
-
-1.0.4	July 10, 1997		S508/FT1 monitoring capability in fpipemon and
-				ppipemon utilities.
-				Configurable TTL for UDP packets.
-				Multicast and Broadcast IP source addresses are
-				silently discarded.
-
-1.0.5	July 28, 1997		Configurable T391,T392,N391,N392,N393 for Frame
-				Relay in router.conf.
-				Configurable Memory Address through router.conf 
-				for Frame Relay, PPP and X.25. (commenting this
- 				out enables auto-detection).
-				Fixed freeing up received buffers using kfree()
- 				for Frame Relay and X.25.
-				Protect sdla_peek() by calling save_flags(),
-				cli() and restore_flags().
-				Changed number of Trace elements from 32 to 20
-				Added DLCI specific data monitoring in FPIPEMON. 
-2.0.0	Nov 07, 1997		Implemented protection of RACE conditions by 
-				critical flags for FRAME RELAY and PPP.
-				DLCI List interrupt mode implemented.
-				IPX support in FRAME RELAY and PPP.
-				IPX Server Support (MARS)
-				More driver specific stats included in FPIPEMON
-				and PIPEMON.
-
-2.0.1	Nov 28, 1997		Bug Fixes for version 2.0.0.
-				Protection of "enable_irq()" while 
-				"disable_irq()" has been enabled from any other
-				routine (for Frame Relay, PPP and X25).
-				Added additional Stats for Fpipemon and Ppipemon
-				Improved Load Sharing for multiple boards
-
-2.0.2	Dec 09, 1997		Support for PAP and CHAP for ppp has been
-				implemented.
-
-2.0.3	Aug 15, 1998		New release supporting Cisco HDLC, CIR for Frame
-				relay, Dynamic IP assignment for PPP and Inverse
-				Arp support for Frame-relay.  Man Pages are 
-				included for better support and a new utility
-				for configuring FT1 cards.
-
-2.0.4	Dec 09, 1998	        Dual Port support for Cisco HDLC.
-				Support for HDLC (LAPB) API.
-				Supports BiSync Streaming code for S502E 
-				and S503 cards.
-				Support for Streaming HDLC API.
-				Provides a BSD socket interface for 
-				creating applications using BiSync
-   				streaming.        
-
-2.0.5   Aug 04, 1999 		CHDLC initialization bug fix.
-				PPP interrupt driven driver: 
-  				Fix to the PPP line hangup problem.
-				New PPP firmware
-				Added comments to the startup SYSTEM ERROR messages
-				Xpipemon debugging application for the X25 protocol
-				New USER_MANUAL.txt
-				Fixed the odd boundary 4byte writes to the board.
-				BiSync Streaming code has been taken out.  
-				 Available as a patch.
-				Streaming HDLC API has been taken out.  
-				 Available as a patch.                 
-
-2.0.6   Aug 17, 1999		Increased debugging in statup scripts
-				Fixed installation bugs from 2.0.5
-				Kernel patch works for both 2.2.10 and 2.2.11 kernels.
-				There is no functional difference between the two packages         
-
-2.0.7   Aug 26, 1999		o  Merged X25API code into WANPIPE.
-				o  Fixed a memory leak for X25API
-				o  Updated the X25API code for 2.2.X kernels.
-				o  Improved NEM handling.   
-
-2.1.0	Oct 25, 1999		o New code for S514 PCI Card
-				o New CHDLC and Frame Relay drivers
-				o PPP and X25 are not supported in this release    
-
-2.1.1	Nov 30, 1999		o PPP support for S514 PCI Cards
-
-2.1.3   Apr 06, 2000		o Socket based x25api 
-				o Socket based chdlc api
-				o Socket based fr api
-				o Dual Port Receive only CHDLC support.
-				o Asynchronous CHDLC support (Secondary Port)
-				o cfgft1 GUI csu/dsu configurator
-				o wancfg GUI configuration file 
-				  configurator.
-				o Architectural directory changes.
-
-beta-2.1.4 Jul 2000		o Dynamic interface configuration:
-					Network interfaces reflect the state
-					of protocol layer.  If the protocol becomes
-					disconnected, driver will bring down
-					the interface.  Once the protocol reconnects
-					the interface will be brought up. 
-					
-					Note: This option is turned off by default.
-
-				o Dynamic wanrouter setup using 'wanconfig':
-					wanconfig utility can be used to
-					shutdown,restart,start or reconfigure 
-					a virtual circuit dynamically.
-				     
-					Frame Relay:  Each DLCI can be: 
-						      created,stopped,restarted and reconfigured
-						      dynamically using wanconfig.
-					
-						      ex: wanconfig card wanpipe1 dev wp1_fr16 up
-				  
-				o Wanrouter startup via command line arguments:
-					wanconfig also supports wanrouter startup via command line
-					arguments.  Thus, there is no need to create a wanpipe#.conf
-					configuration file.  
-
-				o Socket based x25api update/bug fixes.
-					Added support for LCN numbers greater than 255.
-					Option to pass up modem messages.
-					Provided a PCI IRQ check, so a single S514
-					card is guaranteed to have a non-sharing interrupt.
-
-				o Fixes to the wancfg utility.
-				o New FT1 debugging support via *pipemon utilities.
-				o Frame Relay ARP support Enabled.
-
-beta3-2.1.4 Jul 2000		o X25 M_BIT Problem fix.
-				o Added the Multi-Port PPP
-				  Updated utilities for the Multi-Port PPP.
-
-2.1.4	Aut 2000
-				o In X25API:
-					Maximum packet an application can send
-					to the driver has been extended to 4096 bytes.
-
-					Fixed the x25 startup bug. Enable 
-					communications only after all interfaces
-					come up.  HIGH SVC/PVC is used to calculate
-					the number of channels.
-					Enable protocol only after all interfaces
-					are enabled.
-
-				o Added an extra state to the FT1 config, kernel module.
-				o Updated the pipemon debuggers.
-
-				o Blocked the Multi-Port PPP from running on kernels
-				  2.2.16 or greater, due to syncppp kernel module
-				  change. 
-	  
-beta1-2.1.5 	Nov 15 2000
-				o Fixed the MultiPort PPP Support for kernels 2.2.16 and above.
-				  2.2.X kernels only
-
-				o Secured the driver UDP debugging calls
-					- All illegal network debugging calls are reported to
-					  the log.
-					- Defined a set of allowed commands, all other denied.
-					
-				o Cpipemon
-					- Added set FT1 commands to the cpipemon. Thus CSU/DSU
-					  configuration can be performed using cpipemon.
-					  All systems that cannot run cfgft1 GUI utility should
-					  use cpipemon to configure the on board CSU/DSU.
-
-
-				o Keyboard Led Monitor/Debugger
-					- A new utility /usr/sbin/wpkbdmon uses keyboard leds
-					  to convey operational statistic information of the 
-					  Sangoma WANPIPE cards.
-					NUM_LOCK    = Line State  (On=connected,    Off=disconnected)
-					CAPS_LOCK   = Tx data     (On=transmitting, Off=no tx data)
-					SCROLL_LOCK = Rx data     (On=receiving,    Off=no rx data
-					
-				o Hardware probe on module load and dynamic device allocation
-					- During WANPIPE module load, all Sangoma cards are probed
-					  and found information is printed in the /var/log/messages.
-					- If no cards are found, the module load fails.
-					- Appropriate number of devices are dynamically loaded 
-					  based on the number of Sangoma cards found.
-
-					  Note: The kernel configuration option 
-						CONFIG_WANPIPE_CARDS has been taken out.
-					
-				o Fixed the Frame Relay and Chdlc network interfaces so they are
-				  compatible with libpcap libraries.  Meaning, tcpdump, snort,
-				  ethereal, and all other packet sniffers and debuggers work on
-				  all WANPIPE network interfaces.
-					- Set the network interface encoding type to ARPHRD_PPP.
-					  This tell the sniffers that data obtained from the
-					  network interface is in pure IP format.
-				  Fix for 2.2.X kernels only.
-				
-				o True interface encoding option for Frame Relay and CHDLC
-					- The above fix sets the network interface encoding
-					  type to ARPHRD_PPP, however some customers use
-					  the encoding interface type to determine the
-					  protocol running.  Therefore, the TURE ENCODING
-					  option will set the interface type back to the
-					  original value.  
-
-					  NOTE: If this option is used with Frame Relay and CHDLC
-						libpcap library support will be broken.  
-						i.e. tcpdump will not work.
-					Fix for 2.2.x Kernels only.
-						
-				o Ethernet Bridgind over Frame Relay
-					- The Frame Relay bridging has been developed by 
-					  Kristian Hoffmann and Mark Wells.  
-					- The Linux kernel bridge is used to send ethernet 
-					  data over the frame relay links.
-					For 2.2.X Kernels only.
-
-				o Added extensive 2.0.X support. Most new features of
-				  2.1.5 for protocols Frame Relay, PPP and CHDLC are
-				  supported under 2.0.X kernels. 
-
-beta1-2.2.0 	Dec 30 2000
-				o Updated drivers for 2.4.X kernels.
-				o Updated drivers for SMP support.
-				o X25API is now able to share PCI interrupts.
-				o Took out a general polling routine that was used
-				  only by X25API. 
-				o Added appropriate locks to the dynamic reconfiguration
-				  code.
-				o Fixed a bug in the keyboard debug monitor.
-
-beta2-2.2.0	Jan 8 2001
-				o Patches for 2.4.0 kernel
-				o Patches for 2.2.18 kernel
-				o Minor updates to PPP and CHLDC drivers.
-				  Note: No functional difference.
-
-beta3-2.2.9	Jan 10 2001
-				o I missed the 2.2.18 kernel patches in beta2-2.2.0
-				  release.  They are included in this release.
-
-Stable Release
-2.2.0		Feb 01 2001
-				o Bug fix in wancfg GUI configurator.
-					The edit function didn't work properly.
-
-
-bata1-2.2.1	Feb 09 2001
-			o WANPIPE TTY Driver emulation. 
-			  Two modes of operation Sync and Async.
-				Sync: Using the PPPD daemon, kernel SyncPPP layer
-				      and the Wanpipe sync TTY driver: a PPP protocol 
-				      connection can be established via Sangoma adapter, over
-				      a T1 leased line.
-			
-				      The 2.4.0 kernel PPP layer supports MULTILINK
-				      protocol, that can be used to bundle any number of Sangoma
-				      adapters (T1 lines) into one, under a single IP address.
-				      Thus, efficiently obtaining multiple T1 throughput. 
-
-				      NOTE: The remote side must also implement MULTILINK PPP
-					    protocol.
-
-				Async:Using the PPPD daemon, kernel AsyncPPP layer
-				      and the WANPIPE async TTY driver: a PPP protocol
-				      connection can be established via Sangoma adapter and
-				      a modem, over a telephone line.
-
-				      Thus, the WANPIPE async TTY driver simulates a serial
-				      TTY driver that would normally be used to interface the 
-				      MODEM to the linux kernel.
-				
-			o WANPIPE PPP Backup Utility
-				This utility will monitor the state of the PPP T1 line.
-				In case of failure, a dial up connection will be established
-				via pppd daemon, ether via a serial tty driver (serial port), 
-				or a WANPIPE async TTY driver (in case serial port is unavailable).
-				
-				Furthermore, while in dial up mode, the primary PPP T1 link
-				will be monitored for signs of life.  
-
-				If the PPP T1 link comes back to life, the dial up connection
-				will be shutdown and T1 line re-established.
-			
-
-			o New Setup installation script.
-				Option to UPGRADE device drivers if the kernel source has
-				already been patched with WANPIPE.
-
-				Option to COMPILE WANPIPE modules against the currently 
-				running kernel, thus no need for manual kernel and module
-				re-compilation.
-			
-			o Updates and Bug Fixes to wancfg utility.
-
-bata2-2.2.1	Feb 20 2001
-
-			o Bug fixes to the CHDLC device drivers.
-				The driver had compilation problems under kernels
-				2.2.14 or lower.
-
-			o Bug fixes to the Setup installation script.
-				The device drivers compilation options didn't work
-				properly.
-
-			o Update to the wpbackupd daemon.  
-				Optimized the cross-over times, between the primary
-				link and the backup dialup.
-
-beta3-2.2.1	Mar 02 2001
-			o Patches for 2.4.2 kernel.
-
-			o Bug fixes to util/ make files.
-			o Bug fixes to the Setup installation script.
-
-			o Took out the backupd support and made it into
-			  as separate package.
-			  
-beta4-2.2.1     Mar 12 2001
-
-		o Fix to the Frame Relay Device driver.
-			IPSAC sends a packet of zero length
-			header to the frame relay driver.  The
-			driver tries to push its own 2 byte header
-			into the packet, which causes the driver to
-			crash.
-
-		o Fix the WANPIPE re-configuration code.
-			Bug was found by trying to run  the cfgft1 while the
-			interface was already running.  
-
-		o Updates to cfgft1.
-			Writes a wanpipe#.cfgft1 configuration file
-			once the CSU/DSU is configured. This file can
-			holds the current CSU/DSU configuration.
-
-
-
->>>>>> END OF README <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
-
-